Lever Switch

Results: 15

Flex Switch (Model 5855)

The Flex Switch is squeeze switch designed for use by individuals with limited upper limb mobility. It is a single switch operated by bending the flexible rubber tip 0.5 inches in any direction, with an activating force of 6.5 ounces. The switch provides tactile and auditory feedback. The Flex Switch comes mounted on an angled metal rod to facilitate positioning. The rubber tip can be removed and rotated. It can be mounted on a wheelchair or table.

Flipper Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch is activated by pressing down gently on the end of plastic spatula to activate toy, light, or tape recorder. Switch turns off when lever is released. Device is made of flexible plastic or nylon spatula, box about 6 inches long, 3 inches high and 3-6 inches wide, spring from inside a large hair curler, subminiature lever switch, masking tape and rosin core solder. SKILLS REQUIRED: Soldering. AUTHOR: Burkhart, L J TITLE: Homemade Battery Powered T

Headband Switch

Headband Switch consists of an adjustable headband equipped with a switch that has a small paddle for a lever. The paddle rests on the forehead; raising the forehead muscles activates the switch. The paddle must be taped to the forehead. The switch has a 3.5 mm plug. WEIGHT: 2 ounces.

Leaf Switch (Model 58600)

The Leaf Switch, model 58600, is a lever switch designed for individuals with limited upper limb mobility. It is a single switch operated by pressing one side of the leaf. The tip of the leaf requires a quarter-inch of movement for operation and it provides tactile and auditory feedback. This switch has a removable foam pad. Mounting requires additional tubular mounting hardware. DIMENSIONS: The leaf measures 3 inches in diameter by 0.5 inches. The tube measures 13 inches long by 0.5 inches diam

Leaf Switch (Model 730, 730-8)

The Leaf Switch, models 730 and 730-8, is a lever switch designed to develop grasping skills for individuals with physical disabilities. It consists of a vinyl covered flexible spring, which when bent slightly in either direction will activate any adapted toy that it is hooked up to. The deflection angle should not exceed 45 degrees. It comes with the standard 0.25 inch jack and plug and can be ordered with a 1/8 inch jack and plug.

Leaf Switch (Models Cm-2 & Cm-7)

The Leaf Switch, models CM-2 and CM-7, is a lever switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch has a protruding flat vinyl-covered metal leaf and any flexion of the leaf activates a switch. The base has holes for mounting. Two different leaf lengths are available. DIMENSIONS: 6.5 x 1.75 x 0.5 inches. WEIGHT: 1 ounce.

Lever Switch (Models Cm-8/cm-9)

The Lever is switch is designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. The switch is activated by pressing against a padded lever. OPTIONS: Mounting systems are available, including double-sided and quick-adjust swing-away. DIMENSIONS: The lever must travel 0.06 inch for activation. Model CM-8 is 9 inches long; model CM-9 is 7 inches long. WEIGHT: 4 ounces.

Objects In Container Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Switch which will turn on a tape player, battery toy or light when the child drops something into a container. Switch made from a metal cookie or candy tin a 3/4 inch copper U-bracket, 4 3/8 inch, 6-32 bolts with nuts, corregated cardboard and foam rubber. Provides instructions, diagrams and photograph. Suggests uses. SKILLS REQUIRED: Electronics. Soldering. Assembly. AUTHOR: Burkhart, L J TITLE: More Homemade Battery Devices for Severely Handicapped C

Prc Dual Rocking Lever Switch (Model Rl-2M)

The PRC Dual Rocking Lever Switch is a dual rocker switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. This switch is operated by pressing on either end of a plate located on top of the unit, with medium force. One end of the plate activates one switch, the opposite end activates another. The housing is made of plastic and is equipped with rubber feet and a threaded hole for mounting. DIMENSIONS (LxWxH) 3.875 x 2 x 1.5 inches. WEIGHT

Prc Single Rocking Lever Switch (Model Rl-1M)

The PRC Single Rocking Lever Switch is a rocker switch activated by depressing the plate on top of the device. The switch housing is made of plastic, has rubber feet on the bottom, and a threaded hole for mounting. WEIGHT: 3.9 ounces.

Short Leaf Switch (Model Cm-7-1)

The Short Leaf Switch, mode CM-7-1, is a lever switch designed for use by individuals with severe physical or upper extremity disabilities or spinal cord injury. The silent, flexible lever is encased in a soft vinyl sleeve. The switch is normally open and is actuated by deflection of the lever. It remains closed until the deflection force is removed. This switch can be operated by any part of body. Operation requires 4 ounces of force and travel of 3/16 inch. DIMENSIONS: 3.75 x 1.75 x 0.5 inch.

Tash Lever Switch

The Tash Lever Switch is a lever switch designed for use by individuals with severe physical disabilities or spinal cord injury. These switches provide auditory and tactile feedback and require 1.75 ounces of force to activate. DIMENSIONS: 4.75 x 2 x 1 inch. WEIGHT: 2 ounces. COLOR: Black, red, green, yellow, or blue.

Tash Micro Lever Switch

The Tash Micro Lever Switch is a lever switch designed for use by individuals with severe physical disabilities or spinal cord injury. These switches provide auditory and tactile feedback when activated and require 1.4 ounces of force to activate. DIMENSIONS: 1.6 x 1.5 x 0.7 inch. WEIGHT: 1 ounce. COLOR: Black, red, green, yellow, or blue.

Tash Mini Lever Switch

The Tash Mini Lever Switch is a lever switch designed for use by individuals with severe physical disabilities or spinal cord injury. These switches provide auditory and tactile feedback and require 1.4 ounces of force to activate. DIMENSIONS: 4 x 1.5 x 0.75 inch. WEIGHT: 1.5 ounces. COLOR: Black, red, green, yellow, or blue.

Toggle Switch (Model 10-4)

Toggle control switch for powered reclining wheelchair. Available for either fixed or variable speed. Has 3 1/2 inch lever. Wire length allows switch to be mounted in a variety of locations.

Parent Category: Contact Switches
 
Processing...


Driving Walking/Biking Public Transit  Get Directions