Saws

Results: 9

Band Saw Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Extended table for a band saw; the increased work surface makes it easier for a person with unsteady hands or arms to slide or balance large pieces of wood to be cut. Extended band saw table made of 3/4 inch plywood. Includes drawing and diagram with measurements. COMMENTS: For further information contact Dr Ken Brewelheide, Department of Industrial Education, Montana State University, Bozeman, Montana 59717. SKILLS REQUIRED: Woodworking. AUTHOR: Guger

Dremel 580 4 Inch Tilt Arbor Motorized Table Saw

Table saw with 4 inch blade cuts up to 1 inch stock at 90 degree and 3/ 4 inch at 45 degrees. Will make all cuts the big saws do: rip, cross, chamfer, bond, mortise, tongue and groove.

Foot Operated Power Mitre Saw.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Foot operated lever for a power mitre saw enables it to be used by someone with one arm or limited use of one arm. Describes a supplementary foot operated lever consisting of a plywood cutting base, a foot rod and a foot operated sewing machine switch. Includes drawings. COMMENTS: For information contact: Dr Ken Bruwelheide, Department of Agricultural and Industrial Education, Montana State University, Bozeman, Montana 59717. SKILLS REQUIRED: Woodworki

Legup Panel-Lifting Accessory For Table Saws

The LegUp Panel-Lifting Accessory for Table Saws is a table saw accessory designed for use by individuals with upper extremity disabilities. The unit mounts to the edge of a table or fence rail and functions as a fulcrum to assist in placing plywood and other large sheet stock onto the table. The unit is a hinged powder-coated steel leg with a "foot" or hook at the bottom. It bolts to the vertical edge of a table saw or to the horizontal lip at the end of a fence rail attached to the table for

Power Saw Guard, Jig, Guide.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modifications to a woodworking station to provide a power saw blade guard, an assembly jig for plywood boxes and a positioner guide for a pneumatic stapler, to enable a blind person to work quickly and safely. Describes modifications consisting of replacing a swing-up blade guard with a fixed wooden shroud, making a framework around which a box could be quickly assembled, and a guide attached to the pneumatic stapler tip. Includes drawing. COMMENTS: De

Push Stick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Safety feed stick to be used on a variety of power cutting machines, for people with unsteady hands or arms. Diagram of a safety push stick for power cutting machines. SKILLS REQUIRED: Woodworking. AUTHOR: Gugerty, J J; Tindall, L W TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Emnployment of Handicapped People: Supplement REF: Madison, Wisconsin: University of Wisconsin-Madison Vocational Studies Center: p 482-483 NARI

Radial Arm Saw Fixture.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Stabilizer for the workpiece while a person with unsteadiness of the hands or arms is operating a power radial arm saw. Describes a stabilizer made of 3/4 inch plywood, 3/4 inch solid stock (hardwood), metal back stops and 8- inch C clamps. Includes diagrams. COMMENTS: For further information contact: Dr Ken Bruwelheid, Department of Agricultural and Industrial Education, Montana State University, Bozeman, Montana 59717. SKILLS REQUIRED: Woodworking. A

Table Saw Fixture.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Fixture helps overcome difficulty in operating power equipment by persons with unsteadiness of hands or arms. This board fixture slides in the table saw mitre slots. The workpiece is safely held in place with a fence clamp arrangement. The movable cutting table is made of 3/4 inch plywood. Rails and handles are made of hardwood. COMMENTS: Developed by Dr Ken Bruwelheide Department of Agricultural and Industrial Education, Montana State University, Boze

Table Saw Guide.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used by a blind person to set the width of the fence from the saw blade. Device is made from plastic pipes cut into different lengths from 1/2 inch to 8 inches. A file is used to mark the size of each (e.g., 4 grooves indicates 4 inches). The proper size pipe is placed against the saw blade and the fence is moved against the opposite end. Includes picture. SKILLS REQUIRED: Woodworking. AUTHOR: Russ Gage, 4820 South 20th Street, Milwaukee, WI 53221, 414

Parent Category: Tools

Sub-Categories

 
Processing...


Driving Walking/Biking Public Transit  Get Directions