The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam
The AccessaBath Bath Safety System, models AB603072SA and AB603072SA-WC, is a roll-in shower with a seat and grab bars designed for use by individuals who use wheelchairs and individuals with balance or mobility disabilities. System components include one wheelchair accessible shower pan (models FBF-3060L or FBF-3060R) or retro-fit shower pan (models FBF-3260L or FBF-3260R); one barrier free ramp (model BF1260); one flexible threshhold (model BF-FT); one folding-L transfer seat (model HS 553N) o
The ADA Adaptable Roll-in Shower, model 62060103, is a modular roll-in shower designed to provide shower access for wheelchair users. Made from solid Vikrell material, its modular design allows it to be moved around corners and through doorways. Components include an End Wall Set (model 62065103), Receptor (model 62061100), and Back Wall (model 62062103), which snap together with tongue-and-groove installation. Features include a lightly textured swirl-gloss finish, a low profile threshold for w
The Barrier Free Shower, model 3LRS4848B22B, is an accessible shower stall designed for wheelchair users. This three-piece shower stall is made of plywood-backed fiberglass, and has two walls and a center-drain shower pan with a low threshold. The stall has a polyester gelcoat smooth tile finish. OPTIONS: Shower valve; glide bar/hand shower; seat; grab bars; collapsible water stopper; drain; curtain and rod; amd tile accents. DIMENSIONS (HxDxW): 79 x 49 x 49 inches. Threshold curb height is 2.25
The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3
The Barrier-Free Shower Floor with Entry Ramp is a roll-in shower designed for use by individuals who use wheelchairs or walkers. The curbless floor and entry-ramp system can replace an existing bathtub, is designed for wheelchair access and is slip-resistant. Its offset drain placement (similar to that of a bathtub)in right- or left-hand configutation provides convenient installation or retrofit. The floor is made of molded fiberglass with resistance to mold, mildew and stains and a semigloss
The Bath Replacement Shower, model XST 6030 BFKD 1, is a curbless four-piece gel-coat roll-in shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The unit fits the footprint of most existing tub/sho
The Easy Living 48 Inch Shower, model XST4836 BF .5 CURBLESS, is a one piece gel-coat 48 inch curbless roll-in shower with bult-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wa
The Easy Living 48 Inch Shower, model XST 4836 SH 4.0 LOW THRESHOLD, is a one-piece gel-coat shower with built-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a low, step-over four-inch dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, a leg ledge, and soap/shampoo ledges. The half-inc
The Easy Living 48 Inch Shower, model XST5038 BF .5 CURBLESS, is a one-piece gel-coat shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model also offers a four-inch tile finish with diamond accents, a textured slip-resistant floor, a double wall leg ledge, and soap/shampoo ledges. The half-inch tri-cell
The Easy Living 60 Inch Shower, model XST 6038 BF 2.0, is a one- piece gel-coat roll-in shower designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A two-inch curbless threshold is standard. This model offers a six- inch tile finish with diamond accents, a textured slip resistant floor, and soap/shampoo ledges. The half-inch tri-cell wall
The Freewill Barrier-Free Transfer Shower Module is an accessible roll-in shower module with built-in seat and grab bars, designed for use by individuals with mobility disabilities or spinal cord injury. This one-piece acrylic shower stall has an integral soap ledge, brushed or polished stainless steel grab bars, a fold-up seat on left (model K-12101) or right (model K-12100), molded-in floor pattern, and pit installation option. DIMENSIONS (HxLxD): 84 x 45 x 37.25 inches. Inside dimensions are
Shower cabinet is 40 inches wide, 40 inches deep and 82 inches high. It is finished in either baked enamel or stainless steel, and features double wall construction and fibercore insulation. The pressure balanced shower valve is equipped with separate adjustable temperature limit stops. The unit also features a hand-held shower head with swivel fitting , 69 inch flexible brass hose, stainless steel curtain rod and approved curtain, a folding shower seat with a stainless steel frame, and one hori
The Handicapped Shower is a roll-in shower designed for use by individuals who use wheelchairs. This wheelchair-accessible shower has a molded, removable incline ramp that clips into the shower base, and a removable rubber threshold that folds down when a wheelchair crosses over it, then pops up again to hold the water inside the shower. Other features include a built-in, wall-mounted, padded fold-up seat with a heavy-duty stainless steel frame; a single-handle water faucet with an anti-scald va
The Inspire Walk-In Shower is an accessible roll in shower stall designed for use by individuals with mobility disabilities, including wheelchair users and individuals with arthritis. The shower entrance has bi-fold shower doors that open a full 180 degrees to provide barrier-free access across the entire width of the shower. The shower doors are comprised of a single full height tempered glass panel coupled with two half-height panels. All panels feature tempered raindrop patterns. This accessi
The LiteShower Recliner Model is a portable accessible shower stall designed for use by individuals with mobility or severe physical disabilities. The unit consists of a shower tray with collapsible walls to facilitate roll-in access; a folding screen and curtains that close around the sides; a handheld showerhead on a 7-foot hose that connects to a faucet; and a pump for draining the tray after the shower. The tray is placed on the floor near a faucet and a sink or toilet. The user reclines on
The LiteShower Standard Model is a portable shower stall that is accessible to wheelchair users and other individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The unit's shower tray is placed on the floor,
Mullen Shower bases are roll-in showers designed for use by individuals who use wheelchairs or who have walking or lower extremity disabilities. These bases can be installed with vinyl or tile floors and feature a clamping system on two access sides that secures the base to the vinyl floor covering or the tile floor adapter to prevent leakage. Built-in tile upstands on the other two sides contribute to the integrity of the water seals. The ribbed underside enables the unit to key into the floori
The Outlook Series ADA Compliant Shower is a roll-in shower designed for use by individuals who use wheelchairs. This unit comes as a base model with a choice of Americans with Disabilities Act-compliant options. The integrated fiberglass base has an interior and exterior half-beveled edge, front flange, and wheelchair-accessible threshold. OPTIONS: Straight grab bar with textured finish; curtain rod with plastic end caps; chrome fixtures; solid brass drain; large L-shaped or rectangular seat. D
The Refresh Walk-in Shower is a roll in shower stall with built-in grab bars and seat designed to be accessible to wheelchair users and individuals with lower extremity or mobility disabilities or spinal cord injury. This low-entry shower has bi-fold shower doors that open 180 degrees, providing barrier-free access across the width of the shower. The half-height folding doors have tempered raindrop pattern panels that cover the shower opening when closed yet provide full access to the shower whe
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides waterproof pan on floor with minimal lip to impede wheelchair or person walking. Modification procedure: 1) Remove existing bathtub. 2) Paint floor with a concrete adhesive. 3) Form wire cloth frame on floor and 4 inches up on side walls and attach to threshold. 4) Form studwall (36 inches) and 1 by 6 inch maple threshold 36 inches wide at the door. 5) Pour concrete patch base over wire cloth, shaping it for form and drainage considerations (4
The Safer Shower Experience is a roll-in shower designed for use by individuals who use wheelchairs. It has a flexible water barrier and removable rubber ramp that allow a wheelchair to roll directly into the shower stall, where the user can transfer to the drop-down, fold-away bench. Other features include multiple shower settings, two shower heads (hand-held and stationary), four grab bars, chrome hardware, temperature safety valves, and a cushioned drop-down seat.
Black and white terrazzo shower floor is designed with 1/2 inch threshold for wheelchair accessibility. Floor is 40 inches wide and 40 inches deep. Meets California requirements. Cal. Title 24, Part 2-2- 1711 and ANSI Standard A-117.1-1980. .
Molded fiberglass shower stall accessible to wheelchairs. Fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Unit has a detachable 48 inch wide by 20 inch deep wheelchair accessible ramp, with an attached rubber mat for no-skid traction. An l8 inch wide stainless steel and teakwood fold-down seat is attached to the side wall. Five grab bars made of l 1/2 inch18 gauge stainless steel, attached with 3 by 3 inch metal mounting plates. Two 24 inc
The Special Needs Shower, model XST 6337 BF 1.25 WW, is a controlled environment shower with built-in grab bar and seat designed for use with individuals with Alzheimer's Disease. The 24-inch wing wall design allows the toilet or vanity to be closer to the shower, creates a splash-free cove, and defines the space for user security. Controls are out of reach or completely outside of the shower on the wing wall. Contrasting color bars provide further definition and assist visual depth perception.
The Special Needs Wheelchair Accessible Shower, model 6236, is an accessible roll-in shower stall designed for use by individuals with mobility disabilities or spinal cord injury. The unit has a chip-resistant gelcoat finish reinforced with fibreglass, and comes with a left- or right-hand 18-gauge stainless steel grab bar. When installed as per installation instructions, the shower has a sloped threshold for wheelchair access, while retaining water within the shower. This shower also has a molde
The Transfer Shower Floor, model 3739, is a roll-in shower floor designed for use by individuals with mobility, walking, or balance disabilities, spinal cord injury, or arthritis. This unit features features a modified threshold to retain water yet allow easy step-in or wheelchair access. The unit is made of molded fiberglass and features a ribbed underbody for extra strength and an integral center drain with seal and removable strainer. The slip-resistant surface resists mold and mildew and has
Roll in precast terrazzo shower floor, non slip, with integral graded entry ramp. Ramp slope is 1 inch by 12 inches with 1/2 inch front threshold. Center drain with removable stainless plate. Must be set in level grout or mortar bed. Composition: black and white marble chips cast in cement. Rustproof flange extends 1 inch above the outer edge. 60 inches by 60 inches.
The Tuff-Form Shower Base Bathtub Replacement is an accessible shower stall designed to replace standard bathtubs. Designed for barrier-free showering, this unit can be installed with either vinyl or ceramic tile floors and the pitch to drain is built-in. DIMENSIONS(LxW): 59 x 32.25 inches. CAPACITY: 419 pounds. WEIGHT: 48 pounds.
The Universal Design Shower Floor, models FBF-3060L/R and SBF-3060L/R, is a roll-in shower floor designed for use by individuals who use wheelchairs. The floor has a pebbled, slip-resistant surface. It is available with a left- or right-hand drain and can be recessed for flush mounting or used with a ramp (not included). The floor is made of Veritek, a reinforced solid surface (model FBF-3060L/R) or from Swanstone solid surface (model SBF-3060L/R). Reinforced solid surface means color and textur
The Zoe Sterling Roll-In Wheelchair Shower Stall, model 6202, is an accessible shower designed for use by individuals in wheelchairs. The stall includes a base, two end walls, and a back wall. The back wall has built-in shelving and a towel bar. The stall is made of solid Vikrell material with color molded throughout and a lightly textured swirl-gloss finish. The bottom of the stall is lightly pebbled for better traction and safer footing. DIMENSIONS (HxDxW): 72 x 36 x 34 inches. COLOR: Almond o