Monitor Arm

Results: 15

7500 Flat Panel Radial Arm (Models 7500-500, 7500-800, 7500-1000, & 7500-1500)

The 7500 Flat Panel Radial Arm is a monitor arm designed to hold a flat panel computer monitor for individuals with mobility disabilities or low vision. This unit suspends a flat panel (not included) above the desk surface and allows the user to position it. Cables are routed inside the arm. The unit holds a monitor weighing 2 to 13 pounds (model 7500-500), 6 to 21 pounds (model 7500-800), 8 to 27 pounds (model 7500-1000), or 13.5 to 44 pounds (model 7500-1500). The unit has a vertical range of

7Flex Lcd Arm (Model 7Flex-104I )

The 7Flex LCD Arm, model 7Flex-104i, is a monitor arm designed to position a flat panel computer monitor for individuals with physical disabilities or low vision. This arm suspends a flat panel display above the user's desk. The suspended monitor can be repositioned with just one hand. The unit has a vertical range of 16 inches (8 inches up and down from horizontal). It rotates 360 degrees at three joints, and can tilt the monitor over 200 degrees. The unit comes with FLEXmount mounting hardware

Alimed Extension Arm (Models R7421, R7422, & R7423)

The Alimed Extension Arm is a monitor arm designed to clear the desktop and keep the keyboard and monitor/terminal in easy reach for an ergonomically configured workstation. The arm rotates, extends, and retracts a swiveling monitor platform for maximum viewer comfort. A clamp mount fits desktops or tabletops up to 3 inches thick with a minimum 2-inch overhang. The platform lifts monitors up to 50 pounds to a fixed height of 6 to 8 inches above the work surface. The base clamp rotates 360 degree

Arcview Flat Panel Mounting System (Models 9177-2-1000 & 9177-2-1500)

The ArcView Flat Panel Mounting System is a monitor arm designed for use to suspend two flat panel monitors above a desk. The arm is height-adjustable, and the pivot and tilt of each monitor can be adjusted independently within a vertical range of 18 inches. Monitors can be positioned at any point along a beam supported by the arm. The system includes FLEXmount with six mounting options, and 75- and 100-millimeter VESA adapters are included. The arm supports monitors weighing 0.5 to 10.5 pounds

Computer Elevation Device

The Computer Elevation Device is an adjustable monitor arm designed to enable a user to alternate sitting and standing positions while using a computer. The monitor platform is mounted on two threaded rods which are held in place by a wooden frame. A hand crank and two worm gears rotate the threaded rods which in turn raise and lower the platform. PROTOTYPE DEVELOPMENT: Designed by Murray Sharp for a user with a back problem who has to alternate between sitting and standing when using a computer

Ergo-Comfort Flat Panel Monitor Arm (Model 2229Nc)

The Ergo-Comfort Flat Panel Monitor Arm, model 2229NC, is a monitor arm designed for use by individuals with mobility disabilities or low vision. This arm allows the user to reposition the flat panel monitor to an optimal working angle. The arm can be extended or tilted up or down, and rotated up to 270 degrees to position the monitor in use, and it can be folded for compact monitor storage. The arm includes plates for 75- and 100-millimeter CC VESA mounting, with clips for cable management, and

Ergotron Lx Desk Mount Lcd Arm (Model 45-241-026)

The Ergotron LX Desk Mount LCD Arm, model 45-241-026, is a monitor arm designed for use in an accessible computer work station. This unit allows the user to reposition the liquid crystal display (LCD) up, down, forward, or back with a touch to help reduce eye, back, and neck strain. The display can be tilted up to 80 degrees and rotated up to 360 degrees. Cables can be routed under the arm, and the display can be pushed out of the way when not in use. The arm folds back over the base into a comp

Ergotron Mx Desk Mount Lcd Arm (Model 45-214-026)

The Ergotron MX Desk Mount LCD Arm, model 45-214-026, is a height-adjustable monitor arm designed for use in an accessible computer work station. This unit supports liquid crystal display (LCD) monitors weighing up to 30 pounds, and allows the user to position the display to relieve eye, neck, and back strain. The unit has height adjustment, extension/retraction, tilt, and portrait-to-landscape capabilities. The user can push the display out of the way when not in use. Cables can be concealed an

Ergotron Neo-Flex Lcd Arm (Model 45-174-300)

The Ergotron Neo-Flex LCD Arm, model 45-174-300, is a monitor arm designed for use in accessible computer work stations. The unit can be repositioned by pushing the side button while lifting the display, thus changing its position. Adjustments include height, up to 180 degrees tilt, and 360 degrees of pan or rotation. The arm supports monitors up to 22 inches, measured diagonally, and weighing up to 18 pounds. The unit comes with a desk clamp and grommet mount, 4 screws for LCD attachment (long

Evo Lcd Arm (Model 5545)

The EVO LCD Arm, model 5545, is a monitor arm designed to provide flexible positioning of a flat panel computer monitor for individuals with vision or mobility disabilities. This liquid crystal display (LCD) mounting arm holds a flat panel monitor above the work surface and enables fingertip adjustment of monitor height and position. The arm extends up to 16 inches, and folds back upon itself, allowing the monitor to be moved out of the way when not in use. Other features include integrated cabl

Integris Monitor Arm

The Integris Monitor Arm is designed to support patient monitors, televisions, or computer monitors for viewing from bed or wheelchair. This arm, which mounts to the wall, supports up to 80 pounds and provides horizontal, vertical, and rotational positioning.

Lcd Desktop Articulating Mount (Model Lct-101)

The LCD Desktop Articulating Mount, model LCT-101, is a monitor arm designed to optimize the LCD monitor viewing angle and position at a computer workstation. The arm permits the user to adjust to the flat screen's height, tilt, swivel, swing and extension, so it can be viewed from almost any angle or position. The arm has a die-cast aluminum alloy body and includes a cable management system. It is compatible with 10- to 24-inch LCD screens, and supports monitors weighing up to 25 pounds. It com

Monitor Stand

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to work on a computer in a reclined position. The monitor must be placed above the user with the face angled downward. To accomplish this, a commercially available monitor support arm was modified. The monitor mounting plate was removed and replaced with a plywood plate attached to the pivoting sub-base with a pair of hinges. Threaded rod, rod couplings, and steel flat stock were used to fa

Visionmount Full-Motion Desk Mount (Model Md115)

The VisionMount Full-Motion Desk Mount, model MD115, is a monitor arm designed to support a computer monitor at a viewable angle and comfortable position for individuals with physical disabilities or low vision. This full-motion, height-adjustable desk mount holds a flat-panel monitors or TV up to 30 inches in diameter and weighing up to 35 pounds. It can be attached to the back edge of a desk or mounted inside the cable opening. The mount can tilt and swivel with fluid motion in every direction

Visionmount Full-Motion Desk Mount (Model Sd115)

The VisionMount Full-Motion Desk Mount, model SD115, is a monitor arm designed for use to support a computer monitor at a viewable angle and comfortable position for individuals with physical disabilities or low vision. This height-adjustable, full-motion desk mount for flat-panel computer monitors or televisions can be attached to the back edge or mounted inside the cable opening of desks. Independent tensions in the arm and head allow for adjustment, and an extension arm allows the monitor to

Parent Category: Monitor Accessories
 
Processing...


Driving Walking/Biking Public Transit  Get Directions