Side Rail Pad

Results: 17

Bed Rail Padding

CUSTOM ADAPTATION PURPOSE: To prevent an individual who has Huntington’s disease from injuring herself on the rails of her hospital bed. Made of wood, the rails posed a danger to the individual as she thrashes in her sleep and because she got her arms and legs trapped between the rails. The rails were removed and covered with two layers of foam rubber tubing. The rails were then covered with velour fabric by sliding the rails into pockets on the fabric panels. The rails were then reattached to

Bed Rail Pads (Models 14-1113 & 14-1112)

Foam side rail pads, medium firm, shelterite cover, tabs with snaps at four corners. 80 inches long, 12 inches high, 1 inch thick. Available with naugahyde covers (14-1112).

Bed Side Rail Padded Cover (Model 120)

The Bed Side Rail Pad, model 120, is a side rail pad designed to prevent bruising or entrapment. These covers are made of plasticized mesh and are padded for comfort. The covers are equipped with a reinforced hole to accommodate tubes or wires.

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Cushion Ease Side Rail Pads (Models 6013363, 6013365 & 6013663)

The Cushion Ease Side Rail Pads, models 6013363, 6013365 and 6013663) are side rail pads designed for use by individuals with physical disabilities. The pads' pressure relieving foam helps protect the user from hard side rails and reduces gaps between the bed-rails and mattress. Each pad has a Staph-Chek vinyl cover, and it is antimicrobial, flame- and stain-resistant and easily cleaned. The pads can be used with standard or swing-down bed rails, and they attach to the top rail using hook-and-lo

Cushion-Top Vinyl Bed Rail Pads (Models 401210, 401220, & 401230)

The Cushion-Top Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Added cushioning is provided on the top and inside of the rails. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401210 is 60 inches long, model 401220 is 72 inches long, and model 401230 is 80 inches long.

Deluxe Guard Rail Pads (Models 5605, 5605W, 5606, & 5607)

Deluxe Guard Rail Pads are side rail pads designed to prevent injury from bed side rails. Designed to provide maximum cushioning and protection, these pads are made of durable, firm foam and covered with soft, soil-resistant vinyl. The pads attach wih quick-release buclkes. Model 5605W features a vinyl window that runs the length of the pad, enabling the user to see out. DIMENSIONS: Models 5605 and 5605L are 72 inches long. Model 5606 is 60 inches long and model 5607 is 43 inches long.

Elastic Mesh Side Rail Protectors (Model 5707 & 5707H))

The Elastic Side Rail Protectors, model 5707 and 5707H, are side rail pads designed to prevent injury from entrapment in bed side rails. This product features pads for two side rails connected by a one-piece under-mattress section. Each pad covers a rail and fills the gap between the rail and the mattress. Designed to fit most healthcare facility beds, these machine-washable covers stretch to fit the rails, expand and contract during bed positioning, and allow access to control buttons. DIMENSIO

Full Side Rail Cover (Model 5702)

The Full Side Rail Cover, model 5702, is a side rail pad designed to prevent injury from bed side rails. These machine-washable covers are lined with synthetic fur and attach over the top of the side rail and under the mattress. The bed rails can be raised or lowered without removing the covers and reinforced holes permit the attachment of restraints.

Gap Protectors (Model 5706)

Gap Protectors, model 5706, are side rail pads designed to provide protection from injury from bed side rails. These pads fill the gap between double side rails, while still allowing access to built-in patient controls on hospital-style beds. Made of quarter-inch plywood and covered in thick, wipe-clean vinyl, these pads attach to the rails with quick-release buckles.

Posey Soft Split Side Rail Protectors (Models 5705 & 5705Ls)

The Posey Soft Split Side Rail Protectors, models 5705 and 5705LS, are side rail pads designed to provide protection from injury from bed side rails. These pads provide protection and can be used to close the gap between the half rails to deter users from exiting the bed between the rails. These foam pads are covered in wipe-clean vinyl and secure to most rails with the attached hook and loop straps. Available in an open bar side rail design (model 5705) and encapsulated side rail design (5705LS

Safety Padding

Safety Pads are designed for use in SleepSafe beds to prevent injury. Custom made to fit the SleepSafe bed (see entries) safety rails and/or head/foot boards, these pads are made of high- density, half-inch foam. They attach with industrial-strength Velcro.

Side Rail Wedges (Models 5708 & 5708S)

The Side Rail Wedges, models 5708 and 5708S, are side rail pads designed to provide protection from injury from bed side rails. These wedges may be used singly to cover or close the gap between half side rails or zipped together to provide full-length protection of double half side rails, three-quarter side rails, or full-length side rails. Three pairs can be used to cover side rails and head- and footboards. These protectors are made of soft foam and covered in vinyl that can be wiped clean. D

Split-Rail Vinyl Bed Rail Pads (Model 401080)

The Split-Rail Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads are designed for use on divided bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: 9 x 1 x 28 inches.

Synthetic Sheepskin Bed Rail Pads (Model 402010)

The Synthetic Sheepskin Bed Rail Pads, model 402010, are side rail pads designed for use with hospital bed rails. Made of health-care grade, high-pile synthetic sheepskin, these pads cover the sides and top of the rails. The launderable, hypo-alergenic pads secure at the top with heavy-duty snaps and at the bottom with ties. DIMENSIONS: 18 x 60.

Thru-View Vinyl Bed Rail Pads (Models 401015 & 401045)

The Thru-View Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads feature clear vinyl plastic windows to reduce the feeling of isolation.These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401015 is 60 inches long and model 401045 is 72 inches long.

Vinyl Bed Rail Pads (Series 4010 & 4011)

The Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS (HxTxL): Available in 15 x 1 x 60 inches, 15 x 1 x 72 inches, 15 x 1 x 80 inches, 15 x 2 x 60 inches, 15 x 2 x 72 inches, or 15 x 2 x 80 inches.

Parent Category: Other Bed Aids
 
Processing...


Driving Walking/Biking Public Transit  Get Directions