Legrests

Results: 28

Agility Plus

Agility Plus is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This articulating, swing-away legrest come in a choice of mechanical elevation or independent power elevation and is springloaded, removable, and compact.

Amputee Board For Below-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded extension to one side of a wheelchair seat to allow the stump of an above-knee amputee to be elevated and remain in extension. Instructions for building a board to fit between the wheelchair and its cushion with retractable shelves that can accommodate either a left or right amputee; and a foam pad with strips of velfoam which attaches to pieces of velcro on the shelf. Includes list of materials, drawings and photographs. SKILLS REQUIRED: Woodwo

Foot Hugger (Models 6351, 6352, 6353, & 6354)

The Foot Hugger is a legrest panel designed to prevent the wheelchair user's feet from sliding off the foot plates. This foam-cushioned panel is covered in wipe-clean vinyl. This unit protects the user's legs and includes an attached extender to raise the height of the foot plates. DIMENSIONS: All models fit 18-inch wide chairs. Model 6351 is one inch high, model 6352 is two inches high, model 6353 is three inches high, and model 6354 is four inches high.

Gel Ovations Knee Buttons

The Gel Ovations Knee Buttons are knee protectors designed to prevent skin breakdown due to contact with metal legrest hardware. Sold in pairs, these gel protectors are available for manual fixed frame and elevating legrests. DIMENSIONS: 4.5 inches in diameter; 1.25 inches deep.

Leg Contracture Pad (Models 703080 &703082)

The Leg Contracture Pad is a legrest panel designed for use by individuals who use wheelchairs and whose legs are in flexion contracture. This unit fits between the legrests between the seat and the footplates and has a firm foam-padded plywood base covered in wipe-clean vinyl. DIMENSIONS: Model 703080 feets 16-inch wheelchairs and model 703082 fits 18-inch wheelchairs.

Leg Guard (Model 59)

The Leg Guard, model 59, is a legrest strap designed to prevent the wheelchairuser's feet from slipping back off the footrests. This webbing strap fastens to the legrests with Velcro fasteners. DIMENSIONS: 2 inches wide.

Leg Hugger (Model 6355)

The Leg Hugger, model 6350, is a legrest panel for people with lower extremity or mobility disability or spinal cord injury and others who use wheelchairs designed to prevent the wheelchair user's feet from sliding off foot plates between the legrests. This panel lies flat against the leg bars to allow full use of the foot plates and attaches to wheelchairs with quick-release straps. Cushioned with foam padding, the panel is covered in wipe-clean vinyl. DIMENSIONS (WxH): 15.5 x 9 inches. Fits ch

Leg Rest With Seat Mounting Brackets

Custom size pad and pair of custom angled Kydex or aluminum brackets which mount to front edge of solid seat. Brackets may be hinged to provide adjustability on wheelchair with elevating legrests.

Leg Support For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to use a wheelchair. The legrest extends straight out from the wheelchair seat, supporting the legs while leaving the foot free. A support frame was created from square steel tubing and mounted on the right front frame of the chair and under the seat. A horizontal piece comes out from the wheelchair frame and attaches to a vertical piece that supports the horizontal leg support. The support itself is made from half a section o

Legrest Pad (Models 440P1 & 440P2)

The Legrest Pad is an injection molded, steel reinforced calf trough with foam padding. It has an elliptical shape, curved to fit the natural contour of the leg. It attaches to the footrest support with fitted clamps. Adapter plates are available for some makes of wheelchairs. These can be used with Side Thoracic Support hardware.

Legrest Panel (Model S064)

The Legrest Panel, model S064, is designed for use by individuals who use wheelchairs. This fabric panel attaches to the footrest posts with adjustable Velcro straps and cradles the back of the legs with its sling-like design.

Lower Extremity Supports, Solid Calf Panel, Calf Troughs, & Calf Cuffs

Legrests with calf supports. Model 108-3000 is solid calf panel with fixed or swing away brackets, 1 inch drop hooks, 30 degree clamp, all sizes. Model 108-4000 is molded calf trough which mounts to elevating legrests, small has 3 inch circumference, large for 5 inch circumference leg, specify length. Model 108-6000 is molded calf trough which mounts to solid wheelchair seat, small for 3 inch circumference leg, large for 5 inch circumference, specify length. Also available: calf cuffs to mount t

Maxidy Calf Rests

Maxidy Calf Rests are legrest pads designed for use on wheelchairs. They are constructed of long-lasting, durable urethane foam and will fit on all types and models of wheelchairs. Maxidy Calf Rests are guaranteed to be rip-free, soft and comfortable. They are easily installed and all necessary hardware is included.

Ne-At Interim Leg Support

The NE-AT Interim Leg Support is a wheelchair leg support designed for people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. It is intended to provide temporary extra lower leg support for wheelchair users who are in a cast or who need additional support for some other reason. The unit has a pad to support the user's lower leg, a double ball and socket joint to adjust the position and angle, a clamp for attaching to the user's

Orthocare Leg Brace

The Orthocare Leg Brace ##4045 is a leg positioner made of polyurethane foam. It has a contoured cavity to keep the leg in place, and may be used as a legrest pad for leg comfort when wearing a cast. The brace surrounds the leg on three sides with an open top, and extends from the ankle to the mid-thigh (of adults).

Polyester Wheelchair Pads (Models Msc019470, Msc019471, Msc019472, & Msc019473)

Polyester Wheelchair Pads are footplate (model MSC019470), calf (model MSC019471), armrest (model MSC019472), and seat / back (model MSC019473) pads designed for use by individuals who use wheelchairs. These soft, flame-retardant polyester pads protect and support the arms, legs, and feet. The pads are machine washable and do not mat. The calf, armrest, and seat / back pads are latex-free.

Sammons Preston Leg Rest Bumper For Wheelchairs (Model A748310)

The Leg Rest Bumper for Wheelchairs, model A748310, is a leg rest pad designed to protect the legs of wheelchair users from coming in contact with leg rest hardware. Made of foam laminated with a hook-and-loop-responsive soft material, these bumpers can be wrapped around leg rest uprights and other areas and can be trimmed to fit. DIMENSIONS: 4 x 15 inches.

Smartleg.

Elevating legrest that extends 3 to 5 inches when elevated. Fits any adult wheelchair from Invacare. Can be lengthened from 16 to 20 inches. Weight, 12 pounds per pair.

Solo Axis

The Solo Axis is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This legrest has a spring-loaded, single post foot plate with power elevation and articulation at the knee pivot point. For safety, all moving parts are under the seat.

Swing Away Stump Support

The Swing Away Stump Support is an amputee leg support designed for use with wheelchairs. The device has a metal frame and a vinyl covered cushioned leg support for below knee amputees. Available for the right or left leg, the support adjusts horizontally and vertically. Models are available to fit a variety of chairs, including Everest & Jennings, Invacare, and Breezy.

Synthetic Sheepskin Wheelchair Accessories (Models 703010, 703020, 703040, & 703050)

The Synthetic Sheepskin Wheelchair Accessories are a set of wheelchair armrest and legrest pads and seat and back cushion covers designed to provide comfort and protection for people who use wheelchairs. All items are made of high-pile synthetic sheepskin and are nonallergenic. Model 703010 is a pair of wheelchair armrest pads, model 703020 is a wheelchair legrest pad that fits between and over the legrests, model 703040 is a pair of footrest pads, and model 703050 is a set of a wheelchair seat

Tms Padded Legrest Panel

Padded legrest panel. With Velcro straps to attach panel to wheelchair legrest frame. Fits standard and narrow adult chair.

Uplift Stumprest Pack (Model Srpack)

The Uplift StumpRest Pack, model SRPACK, is an amputee leg support designed for use on wheelchairs by individuals with below-knee amputation. The StumpRest unit comprises a universal cross-frame drop-base with a moisture-proof ABS plastic top with retractable sliders that accommodate right, left, or dual amputations. The pack includes a choice of StumpRests (model SR 16, model SR 18, or model SR 20, one standard foam slider cushion, and two Versa Lock drop hook retainers (all components are also

Wheelchair Covering

The Wheelchair Coverings are decubitus pad and seat covers, armrest and legrest pads for wheelchairs designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who spend most of their time in wheelchairs. Made from Hitemp, urine resistant medical sheepskin, these pads help reduce the risk of pressure sores and ulcers and body aches. The pads are made separately to fit the seat, back and arms of the wheelchair. They are washable and are available

Wheelchair Double Leg Strap (Model 7017)

The Wheelchair Double Leg Strap, model 7017, is a legrest strap designed to prevent the feet of wheelchair users from slipping off of the footplates. The straps are made of strong poly webbing with a Velcro closure. The two straps with connecting straps attach to the wheelchair leg assemblies. SIZE: Fits standard adult or narrow adult wheelchairs. COLOR: Black.

Wheelchair Leg Pad (Model 703070)

The Wheelchair Leg Pad, model 703070, is a legrest panel designed to prevent the user's legs from sliding off the footrests. These one-piece rigid-backed, vinyl-covered pads fit the entire width of the opening between the chair's legrests, preventing leg contact with metal wheelchair parts and providing comfort and cushioning when legrests are raised. These pads are designed for spray and wipe cleaning.

Wheelchair Leg Panel (Model 6350)

The Wheelchair Leg Panel, model 6350, is a legrest panel designed to prevent the user's feet from sliding off the foot plates. This machine-washable synthetic fur panel attaches to most chairs with buckles.

Wheelchair Single Leg Strap (Model 7016)

The Wheelchair Single Leg Strap, model 7016, is a legrest strap designed to prevent the legs of wheelchair users from slipping behind the footplates. The strap is made of strong poly webbing with a Velcro closure. SIZE: Fits standard adult or narrow adult wheelchairs. COLORS: Black.

 
Processing...


Driving Walking/Biking Public Transit  Get Directions