Goniometer

Results: 18

180-Degree Goniometer

The 180-Degree Goniometer is designed to enable therpaists to measure the range of motion of wrists and fingers. Made of stainless steel, these units are available in 7- and 14-inch models and have linear markings in inches and centimeters. The 7-inch model has a 180-degree scale marked in five-degree increments. The 14-inch model has two 180-degree scales marked in one-degree increments that read in either direction.

180-Degree International Goniometer & 360-Degree International Goniometer

The 180-Degree International Goniometer and the 360-Degree International Goniometer are goniometers designed to enable therpaists to measure the range of motion of large joints. These transparent goniometers allow for full view of the extremity during measurement. The 180-degree model provides linear measurements up to 7 7/8 inches and is marked in five-degree increments. The 360-degree model provides linear measurements up to 12.25 inches and is marked in one-degree increments. The linear meas

Baseline Finger (Small Joint) Goniometer

The Baseline Finger (Small Joint) Goniometer is designed to measure the range of motion of the metacarpal phalangeal, interphalangeal, and other small finger or toe joints. This stainless steel goniometer has a head with two opposing 180-degree scales marked in five-degree increments. A linear scale marked in inches and centimeters is included on the arm.

Baseline Hand Evaluation Set

The Baseline Hand Evaluation Set is a set of a dynamometer, pinch meter, finger circumference gauge, and finger muscle tester designed for clinical use. The set includes a hydraulic hand dynamometer, a 30-pound pinch gauge, steel finger goniometer, two-point discriminator with a third point, a Wartenburg pinwheel, finger circumference gauge, and a functional finger motion gauge.

Baseline Hi Res Plastic 360-Degree Isom Goniometer (Models 12-1000Hr, 12-1001Hr, & 12-1002Hr)

The Baseline HiRes Plastic 360-degree ISOM Goniometer is a goniometer designed to measure joint range of motion (ROM) and axis of motion. The 360-degree head has three scales calibrated to be used with the International Standards of Measurement (ISOM), sagittal, frontal, and transverse with rotation (SFTR) recording method. The scale reads 1-degree increments. One arm has a linear scale in inches and centimeters. The device is made of clear plastic with solid background behind the gradations, nu

Baseline Hydraulic Hand Evaluation Set

The Baseline Hydraulic Hand Evaluation Set is a set of a dynamometer, pinch meter, finger circumference gauge, and finger muscle tester designed to evaluate the strength and range of motion of the hands and fingers. The set includes a hydraulic hand dynamometer, a 50-pound pinch gauge, and a stainless steel finger goniometer.

Baseline Plastic 360-Degree International Standards Of Measurement (Isom) Goniometer (Models 12-1000, 12-1001, & 12-1002)

The Baseline Plastic 360-degree International Standards of Measurement (ISOM) Goniometer, models 12-1000, 12-1001, and 12-1002, is a goniometer designed to measure joint range of motion. The clear plastic construction permits observation of the joint's axis of motion and range of motion. The 360-degree head has three scales calibrated to be used with the ISOM system. A linear scale in inches and centimeters is included on the arm. DIMENSIONS: 6-, 8-, and 12-inch models are available.

Baseline Stainless Steel Finger Goniometer (Models 12-1010, 12-1011, & 12-1015)

The Baseline Stainless Steel Finger Goniometer is a goniometer designed for use to measure range-of-motion of finger joints (metacarpophalangeal and interphalangeal) and other small joints including toes. The head has two opposing 180-degree scales marked in 5-degree increments. A linear scale in inches and centimeters is on the arm. The deluxe model (model 12-1011) has a larger head for more accurate reading. DIMENSIONS: Length is 3.5 inches (model 12-1015) or 6 inches (models 12-1010 and 12-10

Goni-Alert Feedback Goniometer (Model 71595-0000)

The Goni-Alert Feedback Goniometer, model 71595-0000, is a goniometer designed to measure joint range of motion. The metal construction permits observation of the joint's axis of motion and range of motion. Useful after someone has undergone a total knee, elbow, or hip replacement, the device gives auditory feedback to alert when the maximum allowed range of motion is about to be exceeded. The sound of the beep is adjustable, and a port for an earplug wire is included. A small light that indica

Goniometer

The Goniometer is designed to enable therpaists to measure the range of motion of wrists and fingers. Made of clear plastic, this unit measures from 0 to 180 degrees and is marked in five-degree increments. Each of the two arms has three linear stripes to aid in limb centering and alignment. DIMENSIONS: The arms are 6 inches long.

Guymon Goniometer

Computerized, digital goniometer. Accurate joint measurements. Large easy to read digital displays. Stores data and subject numbers to recall later or download to computer.

Jamar 8-Inch Goniometer (Model 5048B)

The 8-Inch Goniometer, model 5048B, is an instrument designed to measure small joints such as fingers. This goniometer is made of stainless steel with two 180-degree scales in opposite directions. The scale has a knurled knob that can be turned to vary the amount of tension on the arms or to lock them fully.

Jamar Hand Evaluation Kit (Model 5030 Kit)

The Jamar Hand Evaluation Kit, model 5030 kit, is an evaluation kit designed to provide everything for hand and finger evaluations. The kit includes: (1) Jamar Hydraulic Hand Dynamometer - PC 5030 J1; (2) Jamar Hydraulic Pinch Gauge - PC 5030HPG; (3) Jamar 5.5 inch Finger Goiniometer - PC 5050K. The kit comes with a storage and carrying case with individual compartments for each instrument.

Model Bep I, Ii, Iii, Iv, V, Vii

HPM's Models BEP I, II, III, IV, V, and VII comprise a family of measurement tools designed to test standardized extremity and basic central processing performance measures. Each system consists of menu driven software, an interface unit that provides stimuli, a power supply, and manual. Responses are entered directly into the computer from the interface units. Data is then presented in both raw form and visual format. Data representing standardized reference populations is included. Performance

Myotrace 400

The MyoTrace 400 is an EMG feedback unit designed for use in biofeedback and clicical evaluation of movement, force, and muscle activity. This portable handheld unit operates with two channels in stand alone mode and four channels in PC-mode. A wide variety of compatible plugin sensors can be used to objectively evaluate the functional status of the musculo-skeletal system, including force transducers, goniometers, inclinometers, accelerometers, hand dynamometers and foot switches. Applications

Rolyan Finger / Toe Goniometer

The Rolyan Finger/Toe Goniometer is an instrument designed to measure small joints such as fingers and toes. This device easily measures composite range of motion, simplifies measuring of hyperextension and is easy to read. Its flat-surface design lets it rest comfortably on a patient's phalanges and metacarpals for ease of measuring joint motion. The scale on the protractor is printed in two-degree increments for improved reliability. The long arm of the goniometer clears the wrist for accurat

Rolyan Flexion / Hyperextension Finger Goniometer (Model A4414)

The Rolyan Flexion/Hyperextension Finger Goniometer, model A4414,is designed for easy range of motion measurements of the metacarpal phalangeal, proximal interphalangeal and dorsal interphalangeal joints. The clear plastic goniometer measures a range of 30 degrees hyperextension to 120 degrees of flexion without having to reposition the goniometer's proximal base. It allows accurate measurements when positioned over the joint being measured but does not need to be lined up with the joint axis.

Rolyan Introductory Splinting Kit (Model A783101)

The Rolyan Introductory Splinting Kit, model A783101, is a set of products designed to enable medical and therapy professionals to fit and create splints for people with upper or lower extremity disabilities, including splinting material, splint straps, velvet loop material for Velcro, and a goniometer. Included in this kit is one sheet of solid Aquaplast Resilient-T, sheets of solid Ezeform, Aquaplast ProDrape-T, Synergy, and Polyflex II (see also separate entries). This kit also offers pieces

Parent Category: Motion Assessments
 
Processing...


Driving Walking/Biking Public Transit  Get Directions