Prosthetic Accessory

Results: 6

Armrx Arm Glove

The ArmRX Arm Glove is a cast or prosthesis protector designed to protect upper extremity casts, prostheses, lacerations, surgical sites, or skin conditions from exposure to water while showering. These long, disposable clear polyethylene gloves extend above the elbow and are held in place by two adjustable hook-and-loop straps at the top.

E-Z Hook Tension Band Applier

The E-Z Hook Tension Band Applier is a hand-held prosthesis accessory designed to allow upper extremity amputees to apply tension bands to their hooks.

Hands Free Tool Changing Station (Model Rch06-0N2)

The Hands Free Tool Changing Station, model RCH06-0N2, is a prosthetic accessory and terminal device changing station designed for use by individuals with upper extremity amputation who use hand prostheses. This unit enables the user to change upper extremity prosthetic terminal devices without the use of hands. The unit has three Acidel Delran tool holders made of 316 stainless steel mounted on a single base. DIMENSIONS: Base is 7.88 x 8.38 inches; tool holders are 2 inches tall.

Prosthetic Sheath (Model 79000)

The Prosthetic Sheath, model 79000, is designed with an open mesh construction which conforms to shape while allowing for needed ventilation. Made of stretchable nylon and polyester, it is designed to prevent any looseness that might cause soreness or discomfort. The top area of the sheath is designed with a turned welt construction intended for added strength while the toe area is reinforced. White in color, it is available in three lengths for below the knee application. SIZES: Short (10-14 in

Seattle Stainless Steel Components (Model Sca260, Sca270, Sca280)

The Seattle Stainless Steel Components is a socket mounting system designed to be used in endoskeletal construction with Seattle Limb Systems. The system includes the Seattle S.S. Socket Pyramid, the Seattle S.S. Clamp Adaptor, and the Seattle S.S. Foot Pyramid. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Seattle Mounting Plate. The Clamp Adaptor effectively holds nylon, composite and aluminum 30 mm pylons and provides

Seattle Titanium Components (Model Sca210, Sca220, Sca240)

Seattle Titanium Components is a socket mounting system designed to be used in endoskeletal construction with the Seattle "Light" Limb System for individuals with lower extremity prosthetics. The system includes the Seattle Socket Pyramid, Seattle Clamp Adaptor, and the Seattle Foot Pyramid. They are manufactured using sintered titanium, so they are strong, yet lightweight. The Socket Pyramid uses the standard 4-hole mounting pattern and is compatible with the Seattle Laminating Block and the Se

Parent Category: Prosthetics General
 
Processing...


Driving Walking/Biking Public Transit  Get Directions