The 6625 Trunk Support Bar and the 6626 Trunk Support System are torso support and pelvic stabilizers designed for use when an individual is seated in a wheelchair or custom seating system. TRUNK SUPPORT BAR: The bar is made of an inner core of molded nylon with a vinyl coated foam cover. It has a 2-inch polyporpylene strap with a quick release buckle on one side and molded slots on the top and bottom of the core to enable straps to be atached if extra positioning is desired. A crotch strap can
6676 Contour Covers and 6678 Harness Covers are padded covers for lap belts and shoulder straps. The covers are made of vinyl coated foam tubes that slide over belts and straps. The covers are flexible and washable. The 6678 model is designed for use with 1- or 2-inch straps. DIMENSIONS: Contour Covers are 12 x 2 inches, and Harness Covers are 8 x 1 inches (Small) or 12 x 2 inches (Large). COLOR: Black.
The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator
The AliMed Seat Belt Alarm, model 77667, is a seat belt and wandering patient system designed for use by individuals with Alzheimer's disease or cognitive disabilities and mobility disabilities. This dual-function seat belt keeps the patient in the chair and sounds an alarm if disconnected. The system also includes a flashing light to help caregivers to locate the correct individual if the alarm sounds. The belt can be adjusted to patient size. The system includes a metal mounting clip and gromm
Wheelchair seat belt, nylon webbing and auto style push button buckle. Has a pair of iliac crest relief pads so the the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.
Wheelchair seatbelts with 2 types of hook and loop closures, molded plastic Delrin buckle (operates by pinching both sides of buckle simultaneously), lever aircraft buckle, or push button aircraft buckle. Two piece or single continuous belts. Available sizes from 48 to 108 inches.
The Cam Belt with Grommets, model ES-350, is a child belt restraint for pelvic stability. The two-piece belt is made of automotive seatbelt nylon and has a nylon buckle. The belt attaches with grommets to various therapeutic equipment and seating aids. The nuts, bolts, and washers required for installation are included. DIMENSIONS (LxW): 40 x 2 inches.
The Chill-Out Chair Roller is a specialized therapeutic seat that features a unique deep v design to provide additional stable support to those who need trunk alignment.
The Contoured Hip Pad Kit is a lateral hip guide designed to position the hips of an individual with spinal cord injury or severe physical disabilities while seated in a wheelchair. The pads are designed with internal threads front and back for mounting to support brackets which attach to seat bottom. They are adjustable from front to back, in and out, and up and down. There is also a set of internal threads for subasis bar mounting. The Contoured Hip Pad has a contoured shape for maximum hip an
The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches
Abductor with a bracket that easily flips down to allow easier transfers. Bracket is a push lever and drops from the front. Always returns to the original position. Adjustable bracket. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inch
The Economy Wheelchair Belt, model MDT829110C, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. This seatbelt restraint helps the wheelchair user to remain upright in the chair without sliding. This belt encircles the user and crosses in back. The belt is made of washable nylon and is latex-free. SIZES: One size fits all.
The Evoflex Pelvic Stabilizer is a wheelchair seat belt designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury and others who use wheelchairs. The Evoflex has two parts that attach to opposing sides of a wheelchair's seat. When the user is seated in the wheelchair, the two parts attach using a push button seatbelt fastener or a Rehab Latch (available only for the medium and large sizes) to secure the user in the seat. The Evoflex's parts are semi-rigid
Black nylon webbing belt, padded or nonpadded. 72 inches long by 1, 1 1/ 2, or 2 inches wide. Side release, pushbutton, or lever release buckles. Mounting bands to fit 7/8 or 1 inch tubing available.
Wheelchair seat belt. Nylin webbing and plastic delrin buckle. Has a pair of iliac crest relief pads so that the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.
Velcro strap with mounting hardware and D-ring or buckle closure. Mounts to back of solid back or underside of solid seat.
Hip pads are custom sized, 1/2 inch thick medium density foam over 1/2 inch birch plywood. Can be mounted inside armrests, or to seat with custom bent Kydex or aluminum brackets and bolts through threaded wood inserts.
Naugahyde covered foam pads and brackets for mounting on solid back insert. Lateral adjustment possible, stabilizes hips and control adduction. 3 to 4 inches high by 5 to 10 inches deep, curved or straight.
The Leckey Squiggles Early Sitting System (ESS) is a 3-in-1 sitting system designed to provide support in sitting for children up to 4 years and 40 pounds with mobility and physical disabilities. The Leckey Squiggles ESS encourages 3 different types of sitting: 1. Dynamic Sitting – providing support to the trunk that moves with user's movements (this is a side view); 2. Long Sitting – sitting with legs out straight, often used to help stretch out the hamstring muscles on the back of the legs; an
The Miller's Complete Support Systems are lateral trunk support components designed to be mounted off the seat, back insert, modular pan, or wheelchair frame, depending on the application, to give support to the trunk and pelvic areas or to provide adduction. Components of the seat, back, or pan-mounted systems include fixed, swing-away, and multiplane inserts, pads, and doglegs. The doglegs allow approximately 2 additional inches of lateral adjustment. The Multi Plane provides greater flexibili
The Modular Posture Control Systems are modular positioning systems that easily attach to conventional wheelchairs. The Pelvic Positioner are designed as heavy-duty, multipositional, curved independent pads that bear on the sub-asis to secure the pelvis. They limit pelvic rotation, tilt, and obliquity. The positioners are available for both the track style mounting and the hex. The track style positioners are released by lifting the knurled portion of the pivot. They are then rotated outwards fo
The Nandu Snug Seat supports active children who require additional trunk and hip support. The Nandu is available in four sizes, each with up to 6.5 inches continuous height adjustment and up to 8 degrees forward tilt. The back rest can be reversed to provide abdominal support when in the forward leaning position. This design will help children sit up to work without having to work to sit up.
The Hip Pad Kit is designed for hip positioning of individuals seated in wheelchairs, but will adapt to heavier positioning applications. Made of 16 gauge, cold, rolled steel that has been deburred for a smooth finish and plated to prevent corrosion. The plate is formed with a recess for two rows of ##10-32 press nuts and redius corners. The kit consists of one complete pad and all the hardware necessary to mount the pad to the wheelchair seat. OPTIONS: Available in metal only or with cover of t
The Oval Hip Pad Kit is a lateral hip guide designed for positioning the hips of an individual with spinal cord injury or severe physical disabilities while in a wheelchair. The pads are designed with internal threads for mounting support brackets which attach to the seat bottom. Adjustments for the hip pads can be made front to back, in and out, or up and down. The pads are constructed of steel padded with 1.25-inch closed cell foam and completely covered with a Rubatex slip cover. A kit conta
Y belt pelvic stabilization system provides control of pelvic tilt, rotation and obliquity. Price includes modification of solid seat to accommodate (with new seat). Sizes: extra small (6 to 8 inch sitting depth), small (8 to 11 inches), medium(11 to 14 inches).
Pelvic stabilizer designed to allow abductors to flip under the seat to accomodate easy transfers. The bracket release is designed to be accessible to the independent user who is capable of gross motor skills. The abductor locks automatically in the same location to assure proper position of the pelvis and the rest of the body. Release available in right or left. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 i
Removable pelvic stabilizer. Has a bottom hook that slides over seat into the proper position. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inches high by 5 inches wide at the front and 2.5 inches wide at the rear, Extra large 12 inch
The Pelvic Strap (model SB05) is a 1 1/2 inch nylon webbing belt designed to position, stablize and restrain an individual's pelvic area wen seated in a seating system or wheelchair. It has a push-button buckle closure. The strap's length is adjustable on one side, and there are three positioning grommets on opposite side.
The Posey Breezeline Pelvic Holder, models 4411 and 4427, is a pelvic restraint designed for people with lower extremity or mobility disabilities and others who use wheelchairs to prevent the user from sliding out of the wheelchair or geri-chair. It is available with either a double tie strap for triangulation (model 4411) or a slide buckle. SIZES: Small, medium or large. DIMENSIONS (LxW): Model 4411 is 17.75, 21 or 24 x 17 inches (model 4411) or 16.5, 19 or 23 x 17 inches (4427). Upper waist st
The Posey Self-Releasing Belt, models 4183, 4183L, 4220, 4222, 4229 and 5145, are wheelchair seat belts for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This belt has an airline-style buckle allowing for one-handed release by the user. It is made of machine-washable polyester webbing and can be used on a shower chair. The belt mounts on the wheelchair or shower chair with a screw (models 4183 and 4183L), rear removable buckle (4220),
The Pro Custom Cushion, models SC3022 and SC3023, is a foam and gel cushion and pelvic stabilizer designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This cushion has moderate to high positioning and pressure relief features, and can be customized to meet specific positioning requirements. The Pro Custom Cushion has a high resiliency foam base with a pommel and side wedges providing strong pelvic stability and leg po
The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.
Rigid bar with relief area in center for bladder. Padded for comfort. Quick release locks on each side. Small for 12 and 14 inch widths, large for 16 and 18 inch widths.
The Safety-Soft Security Belt is a wheelchair seatbelt designed for use by individuals with cerebral palsy, mobility or neurological disabilities, or spinal cord injury. This seatbelt helps keep wheelchair users upright. The belt has a polyester strap with a thick foam lining to reduce friction on the user's hips. It has bar tacks at stress points and is washable. The one-piece style (model MDT822125) is a single piece of foam that ties behind the back. The two-piece style (model MDT822126) has
The Seat Belt Kit is a wheelchair seatbelt designed for use with the Otto Bock MOSS II seating systems (see separate entries). The kit consists of webbing with a plastic side-release or push button-style buckle. DIMENSIONS: 1.5 and 2 inch widths.
The Self-Assisting Belt, model 4220, is a wheelchair seatbelt designed to reduce siding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of heavy-duty nylon, this machine-washable belt is equipped with an airline-style buckle. DIMENSIONS: Fits hips up to 60 inches.
The Self-Assisting Belt is a wheelchair seatbelt designed to reduce sliding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of polypropylene webbing, this machine-washable belt is equipped with Velcro closure. DIMENSIONS: Model 4228 fits hips up to 42 inches and model 4228L is extrsa-long to fit hips up to 62 inches.
The Sidelyer Strap, H-Strap, and Pelvic Strap are restraint and positioning belts designed for use in conjunction with the large foam positioning shapes by the manufacturer (see separate entries). The straps are fabricated of Evazote foam for cushioning ithout bottoming out. The Sidelyer Strap is designed to support the body in proper alignment when positioned on its side. It comes in Adult and Child models, both available with a hole for a gastrostomy tube. The H-Straps form a harness and are u
Sit 'N Place is a pelvic stabilizer designed for use by individuals who use wheelchairs. This stabilizer is intended for wheelchair users who have a tendency to slide forward in their wheelchairs. Available in a standard and a super model for added support, the unit is placed between the user's legs and a strap extends between the seat and back and down to the anti-tippers to secure the unit. The unit has a flat, comfortable contact surface and the adjustable length and tapered top keep the use
Skil-Care Resident-Release Nylon Belts, series 7010, are wheelchair seatbelts designed to provide security and positioning assistance for people who use wheelchairs. These belts secure to the wheelchair using the existing screws and are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. DIMENSIONS: All models are two inches wide. The model with the side-release buckle is available in 42 or 54 inches long. The model with
Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.
The Slip-On Portable Cafeteria Bench promotes social interaction, independent sitting, and self-feeding. The seat can be used at any table in a cafeteria which aids in choice-making and builds self-esteem. *Adaptive Design products are custom-ordered; dimensions and weight capacity will vary with each order.
The Subasis Bars are pelvic stabilizers designed to control posterior pelvic tilt, increased hip extensor activity resulting in thrusting, and/or reducible pelvic obliquity. The aluminum bar is padded with neoprene rubber and upholstered with neoprene rubber backed nylon terry cloth. The bars are available without mounting hardware (model SR-1000) or with three different mounding systems: The Bolt-On Assembly (model ASSB) is designed to be mounted to the bottom of a plywood or plastic seat board
Padded belt support. Two 12 inch long canvas pads with webbing strap sewn at one end. Straps attach under wheelchair upholstery screws and canvas pads fit across abdomen. Velcro closure.
Belt for wheelchair, webbing straps for attachement to chair, Wide padded canvas body strap, two rows of velcro for closure.
The Velcro Closure Safety Strap for Wheelchairs, model H70623, is a wheelchair seatbelt made of Velcro closure with metal D-ring buckles. The belt is adjustable, washable, and can be sterilized. The strap can be positioned at various heights to insure user comfort and security. A short strap anchors to the wheelchair frame while the long strap adjusts in length. DIMENSIONS: 32 inches long x 2 inches wide.
Velcro wheelchair straps. 4 inches wide, various lengths. Constructed with stainless steel cinch ring and metal grommet for chair attachment. Includes storage feature for when not in use.
The Wheelchair Positioner Cushion is a torso support designed for use by individuals who use wheelchairs. This M-shaped cushion rests over th lap of the users and the notches fit around the wheelchair frame to keep the cushion in position. Designed for use in wheelchairs with standard arms, this cushion promotes upper body alignment, prevents forward leaning, and serves as an elbow rest and work surface. A removable, wipe-clean, water-repellant vinyl cover is included. DIMENSIONS: Available in a
The Wheelchair Safety Belt is a wheelchair seatbelt designed to prevent falls from wheelchairs. The adjustable, heavy-duty Velcro belt crosses the lap and attaches to the wheelchair axle with reinforced grommeted nylon straps. SIZES: One size fits most.
The Wheelchair Seatbelt is a belt restraint designed to keep individuals in wheelchairs from falling forward out of the chair. It can be permanently attached to the upholstery screws and has a Velcro closure. DIMENSIONS: Both models are 2 inches wide; Small (6880) is 32 to 42 inches long, Large (6886) is 42 to 52 inches long.
The Wheelchair Waist Belt With Buckle, model MDT825120, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. Made of washable nylon, this latex-free belt circles the waist, passes through a slide buckle, and ties in back. The slide buckle allows for individual fit and prevents overtightening. SIZES: One size fits all.
The Wheelchair Y Safety Belt is a belt restraint or wheelchair seatbelt. The "Y" shape is designed to prevent slumping and sliding of individuals in wheelchairs. The belt is completely adjustable and made of nylon webbing. SIZES: One size fits all.
Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only.
The standard Zoomi is a youth positioning chair designed for use for children with mobility and neurological disabilities. Designed to promote good feet-on-the-floor posture, it can be used in the classroom and home. Both the seat and footrest can be easily adjusted to the appropriate height and depth, allowing the chair to accommodate the user's needs as they grow. Standard Zoomi chair comes complete with flat seat, backrest and pelvic strap. OPTIONS: Mobile skis, slotted footboard, transfer st