Foam

Results: 207

34 Laminate

Two layered foam seat cushion constructed of Velfloat layer on a High Density foam base. Light to medium flotation. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

4-Square Pillow

The 4-Square Pillow provides a soft, safe spot for reading, napping or daydreaming. Perfectly sized for all ages.

6915 Anti Thrust Cushion

The 6915 Anti Thrust Cushion is a wedge foam seat cushion designed to aid individuals who are prone toward slipping down into their seat. The cushion can be used in classroom chairs, wheelchairs, kitchen chairs, etc. Two snaps are attached to the rear of the cushion for fastening to the seating unit. The wedge is vinyl covered and washable. SIZES: Small, Medium, and Large. DIMENSIONS: Available in 14, 16, or 18 inches square (respective to sizes); all sizes are 3.5 inches in front tapering to 1

6919 Positioning Pillow

The 6919 Positioning Pillow is a body positioner and infant positioning cushion made of a foam blend. Small squares of foam fill an inner pillow case made of vinyl, which is covered with an outer pillowcase that zips off for washing. SIZES: Small or Large. DIMENSIONS: 20 x 20 inches (small) and 32 x 20 inches (large). COLOR: Forest green.

Akros Gel-Cell Cushions (Models Nc28395 & Nc28396)

Akros Gel-Cell Cushions are gel and foam seat cushions designed to be used in wheelchairs to prevent pressure sores and provide extra comfort for the user. The patented gel cell and foam construction provides a stable surface and helps prevent bottoming out. The cushion features a waterproof Staph-Chek inner cover and a washable cotton/polyester outer cover. DIMENSIONS (WxDxH): Model NC28395 is 16 x 18 x 2 inches and model NC28396 is 16 x 18 x 3 inches. WEIGHT: The cushions weigh between 6 and 7

Alarm Cushion (Models 754410, 754420, & 754430)

The Alarm Cushion is a foam or gel and foam seat cushion designed for use with geri chairs. This cushion features a built-in weight sensor factory sealed inside a vinyl compartment in the cushion to protect it from urine and wear and to prevent it from shifting beneath the user's weight. When the user's weight is removed as they attempt to leave the chair or as a result of sliding, an alarm sounds.

Alimed Latex Wheelchair Cushions

AliMed Latex Wheelchair Cushions (models ##140, ##141, and ##142) are firm, resilient, high-density seat cushions with polyester knit covers. The cushions are made of pincore (open weave) construction for coolness, comfort, and aeration, and double knit for stretch and elasticity. The covers are zippered for easy removal. DIMENSIONS: 2, 3, or 4-inch thicknesses x 16 x 18 inches. All thicknesses available in Pediatric dimensions (16 x 16 inches) for the same price. COLOR: Covers are Navy Blue.

Alimed Sit-Straight Basic Cushion

The Sit-Straight Basic Cushion is a high density foam seat cushion with a convex base designed for use in wheelchairs with sling seats. Intended to improve sitting posture and weight distribution, this cushion is a combination of the Solid Seat Insert (see separate entry) and a wedge cushion. The wedge is intended to encourage modified anterior pelvic tilt. A No-Slip waterproof cover with front zipper is standard with the cushion, and protects against liquid infiltration. Attached straps secure

Alimed Solid Seat Insert

The AliMed Solid Seat Insert is a semi-rigid, closed-cell foam seat cushion designed to correct wheelchair sling-seat sag by increasing seat flatness. This foam block has a convex bottom and a flat top. The convex portion fills the concave depression formed by the sling wheelchair seat. The flat, level surface created balances the pelvis, distributes weight evenly on both ischial tuberosities, and discourages side-to-side tilt. This seat insert is waterproof and smooth surfaced; there are no cra

All Star Cushion (Models Sc3030 & Sc3031)

The All Star Cushion, models SC3030 and SC3031, is a foam seat cushion designed for use by active wheelchair users who require mild to moderate lateral stability and mild to moderate pelvic and leg support. The cushion is made with layers of high resiliency polyurethane and visco foam. An internal anti-thrust shelf and lateral wedges create pelvic stability which discourages sacral sitting and relieves pressure from the ischial areas. The cushion comes standard with exterior and interior incont

Anti-Decubitus Gel Sit-Straight Cushion

The Anti-decubitus Gel Sit-Straight Cushion is a foam seat cushion designed to fight excessive pressure and pressure sores by encouraging better posture and more uniform weight distribution. The cushion is made of fire-retardant T-Foam (see separate entry), a pressure relieving, flotation-like foam material that molds and effectively increases the weight bearing area to reduce pressure, and high density foam wedge tapered on the distal edge to relieve pressure on the thighs. A No-slip incontinen

Back Cushion (Model 76)

The Back Cushion, model 76, is a foam back cushion designed for wheelchair use. The cushion is fabricated of foam covered with fabric. DIMENSIONS: 1 inch thick.

Back Support (Model Ha-4785)

Back Support, model HA-4785, is a foam back support cushion designed for use by individuals who need extra back support. Formed from deeply contoured foam, this support cushion adds extra comfort. It has a washable cover and elastic straps to fit and secure it to most chairs. DIMENSIONS (HxLxW): 120 x 400 x 330 millimeters. WEIGHT: 800 grams.

Bariatric Seat Cushion

The Bariatric Seat Cushion is a foam cushion designed to prevent pressure sores or ulcers in individual who sit for long periods of time. Made of firm density 100-percent polyurethane foam, the cushion provides added support and comfort for larger individuals. DIMENSIONS (LxW.H): 20 x 16 x 4.5 inches. CAPACITY: 250 pounds. COLOR: Navy.

Bariatric Wheelchair Cushion (Models Msc26320184, Msc26322184, Msc26324184, Msc26326184, & Msc26328184)

The Bariatric Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The cushion is constructed with a gel pack placed between two layers of foam, and it has a Nylex cover. DIMENSIONS (HxLxW): 4 x 18 x 20 inches (model MSC26320184), 4 x 18 x 22 inches (model MSC26322184), 4 x 18 x 24 inches (model MSC26324184), 4 x 18 x 26 inches (model MSC26326184), or 4 x 18 x 28 inches (model MSC26328184). CAPACITY

Basic Wedge Cushion

The Basic Wedge Cushion is a seat cushion made of high density foam designed to not flatten out under the user's weight. The wedge shape is intended to encourage a modified anterior pelvic tilt that results in upright sitting posture and discourages slipping forward in the chair. This cushion may be used in Geri chairs or wheelchairs. A No-Slip, water resistant cover is included. DIMENSIONS: 16 x 18 inches (no. 260), 16 x 16 inches (no. 261), or 14 x 14 inches (no. 1287). Thickness tapers from 3

Bifloat (01-7000 Series)

Bifloat cushion is fabricated from a lamination of two foam layers. The top is a high resiliency medium firm polyurethane. Base layer is a high density extra firm Neoprene foam. The average weight is 2 to 4 pounds. Standard sizes are 16 inches by 16 inches by 2, 3 or 4 inches, and 18 inches by 16 inches by 2, 3, or 4 inches.

Body Ryzm Jazz Rx Seat Cushion

JazzRX is a clinically designed back cushion meant to help reduce the health risks of sitting still, prevent "C" curve in the back and improve spinal alignment. It helps reduce back pain during long periods of sitting whether in car, airplane or at work and home. DIMENSIONS: 16 inches length x 0.5 inches height x 16 inches width inches. WEIGHT: 1.1 pounds. COLOR: Black. WARRANTY/GUARANTEE: 3-year, 100 percent performance guarantee.

Boppy

Boppy is a body positioner designed to provide support for infants in a prone or suppine position and to provide support while sitting for young children.The C-shaped padded, cushion style support features an opening to cradle an infant or to fit around a child's hips. Two of these cushions may be stacked for support while sitting. OPTIONS: Cotton slipcover. COLOR: The pillow is white. The slipcover is available in blue with bees or pistachio dots.

Bottoms Up Pelvic Spinal Posture Seat

Contoured seat to relieve back, hip, leg pain and sitting fatigue, prevent slumping, slouching and pressure on the trochanters. Can be used in cars, wheelchairs, hi-chair, home and office furniture. Widths 16, 18, 20 and 22 inches. Infant and junior models available.

Cloud Cushion, The

The Cloud Cushion is a foam wheelchair cushion designed for use by individuals at risk for pressure sores or ulcers. The Cloud Cushion offers protection and stability in a lightweight, low-profile design. It produces acceptable levels of pressure distribution, eliminating the risk of bottoming out and the potential for failures due to punctures or leaks. The cushion corrects to automatically adjust to the dynamic conditions that occur within the seating environment. The Lycra Cel-Pak is install

Coccyx Cushions (Models N1001 & N1002)

The Cocccyx Cushions are foam seat cushions designed for use in wheelchairs. These cushions have a firm foam base, a coccyx cutout, and a removable zippered cover. DIMENSIONS: Model N1001 is 3 x 16 x 16 inches and model N1002 is 3 x 16 x 18 inches. COLOR: The cover is navy.

Coccyx Gel Cushion

The Coccyx Gel Cushion is a foam wheelchair cushion designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to relieve pressure to the spine for wheelchair users, this cushion is made of a high density foam and gel combination for added strength and durability. It features a square shaped cutout for the coccyx to aid in proper weight distribution. DIMENSIONS (LxWxH: 18 x 16 x 3.5 inches. COLOR: Blue.

Coccyx Relief Sit-Straight

The Coccyx Relief Sit-Straight is a foam cushion with a convex solid seat insert base and a dished coccygeal area for pressure relief. The cushion is made of a high density foam for cushioning and support with a top layer of T-Foam (see separate entry), a pressure-relieving flotation-like foam material. The cushion is covered in Alitex, a Gortex based, breathable, waterproof fabric. DIMENSIONS: 16 x 18 inches (no. 1246) or 16 x 16 inches (no. 1247).

Coccyx Wheelchair Cushion

The Coccyx Wheelchair Cushion is a foam seat cushion for coccyx pressure relief for wheelchair users. This cushion features a V-shaped cutout for the coccyx and a masonite insert for additional strength and rigidity. This cushion is available with a choice of a rip-stop nylon cover or a plaid fabric cover. DIMENSIONS: 16 x 18 x 2 inches.

Combo T-Foam Cushion (Models 1175 & 1176)

The Combo T-Foam Cushion is a foam seat cushion designed to provide pressure distribution, fight pressure sores, and provide superior sitting stability. The cushion is made of trilaminate construction that combines the best of T-Foam in a single cushion. The top layer of the Combo is 1-inch thick T-Foam; the middle 1-inch thick layer is medium grade for full flotation, regardless of user weight; and the base layer is made of high-density foam that will not bottom out under hot, humid conditions.

Comfort Cushion (Model 8050)

The Comfort Cushion, model 8050, is a non-slip rubber-foam cushion designed for use by individuals with mobility or balance disabilities. Made of cellular plastic, the cushion is placed under the buttocks to prevent the user from sliding down in bed and at the same time relieve pressure on the abdomen. Placing the pillow under the knees is also comfortable and relieves leg pressure. DIMENSIONS (LxW): 40 x 50 centimeters.

Compu-Cush

The Compu-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, this cushion is specially designed for use while using a computer. Features include a wedge-shaped design to tilt the pelvis forward, a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable velour cover. DIMENSIONS: 13 x 16 inches. COLOR: The cover is black. WARRANTY: One-year lim

Conforma Extracted Pad (Models Msc0398046, Msc0398056, Msc0398057, Msc0398066, Msc0398157, & Msc0398156)

The Conforma Extracted Pad is a wheelchair decubitis pad designed for use by individuals with mobility disabilities or spinal cord injury at risk for pressure sores/ulcers. This foam pad is made of an anatomically conforming material that accommodates ischial tuberosities and the normal sacral shape to provide spinal support and stable positioning, distribute weight evenly, reduce pressure, and protect the integrity of the skin. The pad is available with a Nylex cover (models MSC0398046, MSC0398

Contour Positioning Cushion

The Contour Positioning Cushion is a gel and foam seat cushion designed for uswe at risk for pressure ulcers who use wheelchairs. This cushion provides support for good sitting posture and utilizes multi-layered foam currounding three gel cores to provide maximum pressure reduction. The molded built-up front disperses the user's weight through the back of the thighs, while the center keeps the leg properly positioned. OPTIONS: A Staph-Chek Fusion cover is available. DIMENSIONS: 18 x 18 x 5 x 4 i

Contour Seat Cushion (Model Sc1500)

The Contoured Seat Cushion, model SC1500, is a wheelchair seat cushion with a contoured base designed for individuals with severe physical disabilities who spend extended time in a wheelchair. The cushion is made of a variety of open-cell and closed-cell foams, starting with a closed-cell base and a contoured open-cell layer. Then a one-inch Viscoelastic contouring foam is overlayed, providing maximum pressure distribution. Velcro strips are sewn in the Rubatex slipcover for secure seat placemen

Convex Gel Cushion (Models 6518 & 6518W)

The Convex Gel Cushion is a gel and foam seat cushion designed to reduce the risk of pressure sores and to support posture for people who use wheelchairs. This cushion features a firm convex bottom to fill a wheelchair sling to provide a stable seating surface. The waterproof cushion is available in a standard model (no. 6518) and a wedge model (no. 6518W) and includes a non-slip, water-repellent, wipe-clean vinyl cover that unzips for removal. DIMENSIONS (WxDxH): Model 6518 is 18 x 16 x 3 inche

Convoluted Comfort Cushions

The Convoluted Comfort Cushions are foam seat cushionsdesigned for use by individuals who need extra padding for comfort while seated Made from high-quality polyurethane foam, the cushions are available in standard and high densities. DIMENSIONS: 18 x 16 x 4 inches, 16 x 16 x 3 inches, or 18 x 16 x 4 inches.

Convoluted Invalid Ring

The Convoluted Invalid Ring is an eggcrate foam ring seat cushion designed to relieve pressure. Made of flame- retardant convoluted polyurethane foam, the ring comes standard with a choice of a polycotton cover or a plaid fabric cover. DIMENSIONS: 16.25 x 14 1/8 inches. COLOR: The polycotton cover is white.

Convoluted Roam Ring (Model 513-7614-1900)

The Convoluted Roam Ring, model 513-7614-1900, is a ring-shaped seat cushion designed for use by individuals at risk for pressure sores/ulcers or who sit for extended periods. The cushion conforms to body contours to reduce pressure point discomfort. This cushion is made of puncture-resistant, high-density foam that retains its shape through repeated use. The removable polyester cotton cover is machine washable. SIZE: 18 inches. CAPACITY: 250 pounds. COLOR: White, navy, or plaid).

Convoluted Wheelchair Cushion

The Convoluted Wheelchair Cushion is an eggcrate foam seat cushion designed for use in wheelchairs. Designed to relieve pressure from prolonged sitting, the polyurethane cushion is flame retardant. OPTIONS: Plaid cover. DIMENSIONS: 16 x 18 x 3 inches or 16 x 18 x 4 inches. COLOR: The cushion is blue.

Convoluted Wheelchair Cushion With Back

The Convoluted Wheelchair Cushion with Back is an eggcrate foam seat and back cushion designed for use in wheelchairs. The flame-retardant convoluted polyurethane cushion helps promote good posture, prevent pressure sores, and prevent slipping. The cushion may also be used in standard chairs. DIMENSIONS: 18 x 36 x 3 inches. COLOR: Blue.

Convoluted Wheelchair Cushions (Series 755)

The Convoluted Foam Cushions, series 755, are foam seat cushions designed to provide pressure relief for individuals who use wheelchairs. The eggcrate-style foam cushions are available without a cover or with a choice of a polyester fabric or synthetic sheepskin cover. DIMENSIONS: The cushions are offered in 16 x 18 x 3 inches or 16 x 18 x 4 inches.

Convoluted Wheelchair Pad With Nylex Cover (Models Cbc019055, Msc019008, Msc019005, & Msc019010)

The Convoluted Wheelchair Pad With Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. The nylex cover is fluid-resistant and antimicrobial. The foam pad is convoluted or ridged to help prevent the user from sliding forward or out of the wheelchair. Model MSC019005 is latex-free. DIMENSIONS (HxLxW): 4 x 26 x 18 inches (model CBC019055), 2 x 16 x 22 inches (model MSC019008), 4 x 18 x 18 inches (model MSC019005), or 3 x 18 x 18 inches (model MSC0190

Covered Solid Foam Cushion (Models F2050-6, F3050-6, & 4050-6)

Covered Solid Foam Cushions are foam seat cushions designed for use in wheelchairs. Made of high-density foam, these cushions provide firm seating and pressure relief and come with a zippered cover. DIMENSIONS: Model F2050-6 is 2 x 16 x 18 inches, model F3050-6 is 3 x 16 x 18 inches, and model F4050-6 4 is 4 x 16 x 18 inches. COLOR: The cover is navy.

Cozy Seat (Models 703005 & 703006)

The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.

Cushion Design

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Cardboard and foam seat cushion is shaped to provide relief from pressure sores for wheelchair users. To construct cushion, cut rectangular pieces of corrugated cardboard the same size as the user's wheelchair seat upholstery. Glue enough pieces together to make a 2 inch high stack. Cut out a pressure relief hole. Dampen top layers of cardboard cushion and have user sit on them for several hours until the cushion is molded to user's buttocks. Dry the c

Cushions

These Activeaid Cushions are foam seat cushions for wheelchairs made of 2, 3, or 4-inch thick vinyl Staph. The cushions are check covered and made of polyurethane foam. One model has a horseshoe cutout to relieve sacral pressure. A board seat insert is optional. SIZES: Adult (16 x 18 inches) and Junior (16 x 16 inches).

Custom Seat Cushion

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to sit for longer periods. A sideways groove 1.5 inches wide was cut into a four-inch thick piece of foam exactly where the user's sitting pressure points are. To maintain the integrity of the foam, the groove starts 2 inches in from each side. A V-shaped groove was cut under the tail bone. The two grooves move sitting pressure to the fleshier parts of the legs and buttocks and alieviates direct pressure on bony area

Deluxe Gel Foam Cushion (Models 6519Sc & 6500Sc)

The Deluxe Gel Foam Cushion is a gel foam seat cushion designed for use in wheelochairs. This cushion is designed to equalize pressure and reduce soreness and features a foam-encapsulated gel bladder that will not bottom out. The standard cover is a water-repellant Staph-Chek cover with carrying handles. OPTIONS: A fleece cover is available. DIMENSIONS (WxDxH): Model 6519SC is 18 x 16 x 2 inches and model 6500SC is 20 x 18 x 2 inches.

Deluxe Seat Solution

The Deluxe Seat Solution is a foam seat cushion designed for use by individuals at risk for pressure sores/ulcers or who need support while seated. This cushion has an orthopedic wedge-shaped design that tilts lower back forward to restore a natural spinal curve, while a cut-away section relieves pressure on the tailbone and spine. This high-density poly/foam cushion has breathable fabric on one side and is wipe-clean and water-resistant on the other. The cushion has a built-in carrying handle.

Deluxe Wedge Cushion (Model 6535)

The Deluxe Wedge Cushion, model 6535, is a wedge foam seat cushion designed for use in wheelchairs. Made of firm, high-density foam, this cushion gently rotates the hips back to prevent forward sliding. Covered in water-repellant, wipe-clean, non-slip vinyl, the cushion has a convex bottom to provide a stable foundation and prevent seat hammocking. DIMENSIONS (WxD): 18 x 16 inches. The cushion tapers from 4 inches high in the front to 2 inches high in the back.

Deluxe Wheelchair Cushion (Models 7604, 7605, & 7606)

The Deluxe Wheelchair Cushion (Pincore Latex Style Foam) is a foam seat cushion designed for those who need a little extra support. The high density foam coare will maintain resilience and will not crack or crumble. DIMENSIONS: 16 x 18 inches, with a thickness of 2, 3 or 4 inches. COLOR: Plaid.

Drop Seat And Cushions (Models 6540, 654020, 6541, & 6519)

The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the

Durafloat Ii Cushions (01-2000 Series)

Foam seat cushion, 10 pound density. For heavy duty flotation or hard use. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Dyna Flo

Seat cushion of open cell foam, similar to T foam. Each cushion has progressive laminations of soft, medium and firm foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Economy Gel Foam Cushion (Model 6512)

The Economy Gel Foam Cushion, model 6512, is a gel and foam seat cushion designed for use in wheelchairs. This cushion helps reduce pressure and comes with a water-repellent, bacteriostatic Staph-Chek cover. DIMENSIONS (WxDxH): 18 x 16 x 2 inches. COLOR: The cover is blue.

Express

The Express is a foam wheelchair seat cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The cushion is made of open-cell foam in two different densities, bonded together in opposing patterns to prevent the pelvis from going into a posterior tilt and sliding out of the chair. Closed-cell foam lateral pieces add increased stability or can be removed to adapt to a sling seat. The cushion comes with a front label, a nylon handl

Foam Donuts (Models N8001, N8002, N8004, & N8008)

Foam Donuts are foam ring seat cushions designed for use by individuals at risk for pressure sores/ulcers. Models N8004, N8002, and N8008 are made of molded foam and model N8001 is made of convoluted foam. A cotton cover is included with all models. DIMENSIONS: Model N8004 is 14 inches in diameter, model N8008 is 18 inches in diameter, and models N8002 and N8001 are 16 inches in diameter. COLOR: The cover is light blue.

Foam Invalid Cushion

The Foam Invalid Cushion is a foam ring seat cushion designed for use by individuals with pressure sores. This foam cushion conforms to the natural body contours of the user. Its removeable cover is machine washable and wrinkle resistant. The cover material is 50 percent cotton and 50 percent polyester. DIMENSIONS: 12.5 x 16 x 2.75 inches.

Foam Invalid Cushion (Model 6233)

Puncture proof foam ring cushion. DIMENSIONS: 13 x 17 inches.

Foam Mattress Wedge (Models 8026Ac, 8027Ac, & 8028Ac)

The Foam Mattress Wedge is a wedge foam seat cushion designed for head, back, foot or leg elevation. The wedge is non-allergenic and covered with non-plasticized, water-repellent A.C.A. Hospital ticking. DIMENSIONS: 26 x 24 inches, 7 1/2, 10 1/2 or 12 1/2 inches high.

Foam Ring Cushion (Models 6331 & 6332)

The Foam Ring Cushion is a molded foam ring seat cushion. The cushion conforms to body contours and has a removable washable dacron cotton cover. DIMENSIONS: 16 x 14 x 2 inches (6331) or 18 x 15 x 2 inches (6332).

Foam Wheelchair Cushion (Model 6227)

Foam wheelchair cushion fits all standard adult wheelchairs. 16 by 18 inches, 2 inches thick. Washable plaid cover.

Foam Wheelchair Cushion (Models 6476 Thru 6484)

The Foam Wheelchair Cushion is a foam seat cushion designed for the comfort of individuals who use wheelchairs. The cushion is made of firm polyfoam. OPTIONS: Brown polyester/cotton fabric covers with Velcro closure available (5104-5112). DIMENSIONS: 16 x 16 inches, 16 x 18 inches, or 18 x 18 inches and 2, 3 or 4 inch thicknesses.

Formfloat Ii Cushions (01-9000 Series)

3 layered foam seat cushion. Top layer is Dyna Flow foam, an open cell foam. Middle layer is High Density foam, and base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Gel And Foam Wheelchair Cushion

The Gel-Foam Wheelchair Cushion is a gel flotation seat cushion designed for use in wheelchairs. This two-chamber cushion combines a top layer of gel with a bottom layer of foam for maximum weight distribution and stability. The included cover is machine washable. DIMENSIONS: 16 x 18 x 2 inches.

Gel Cushion

The Gel Cushion is a gel and foam seat cushion designed for use by individuals who use wheelchairs and others who are seated for long periods. This cushion has a liquid gel-filled core encased between two layers of high-density foam. A removable, washable polyester fabric cover with a synthetic sheepskin top is included. DIMENSIONS (WxDxH): 18.5 x 16 x 4 inches.

Gel Cushions (Models D4001 & D 4002)

The Gel Cushions are gel and foam seat cushions designed for use in wheelchairs. This cushion features a gel bladder filled with 3.5 quarts of aqueous, nontoxic gel enclosed in fire-retardant polyurethane foam. Both models come with a zippered cover with carrying handles. Model D4001 has a knit cover and model D4002 has an incontinent cover. DIMENSIONS: 17 x 17 inches.

Gel Top Seat Cushion

The Gel Top Seat Cushion is a gel flotation seat cushion designed to provide pressure production for people who use wheelchairs. This cushion consists of a gel pad on a high-density foam base. A fluidproof, bacteria-resistant, antistatic cover is included. DIMENSIONS: Available in 16 x 16 inches or 16 x 18 inches.

Gel-Eeze Wheelchair Contour Cushion

The Gel-eeze Wheelchair Contour Cushion is a gel and foam seat cushion designed for use in wheelchairs.Constructed of a layer of gel in a bladder sandwiched between two layers of foam, this cushion has a contoured top for better weight distribution and a center pommel and hip adductors for positioning assistance. The cushion comes with a wipe-clean cover. DIMENSIONS (HxWxD): 2 x 18 x 16 inches. WEIGHT: Four pounds. COLOR: Black.

Gel-T

The Gel-T is a gel and foam seat cushion designed for geri chair and wheelchair users who are at moderate risk of pressure sores. This cushion features a segmented gel-filled bladder between two soft foam layers. A wipe-clean vinyl cover is included. DIMENSIONS (WxLxH): 15 x 15 x 2 inches, 17 x 17 x 2 inches, 19 x 19 x 2 inches or 21 x 21 x 2 inches.

Geo-Matt Contour

The Geo-Matt Contour is a foam seat cushion designed for wheelchair users who are at moderate risk of pressure sores. This cushion features the Geo-Matt design with more than 800 cells to respond independently to absorb pressure and minimize shearing plus ischial/coccygeal bucketing, contoured leg channels, and a center abductor. The cushion is encased in a wipe-clean Durafilm incontinence-proof coating. The cushion is available without a cover or with a choice of a vinyl facility cover with a n

Geo-Matt Prt

The Geo-Matt PRT Is a foam seat cushion designed for use by active wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. A modification of the Geo-Matt design for this cushion creates a lower, firmer base than the Geo-Matt Therapeutic Seat Cushion (see separate entry)

Geo-Matt Therapeutic Seat Cushion

The Geo-Matt Therapeutic Seat Cushion is a foam seat cushion designed for use by wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. The cushion is available without a cover, with a Soft Skin moisture barrier, with a fire-retardant Soft Skin, or with a vinyl and nylon

Gseat

The GSeat is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities. The GSeat is made with visco-elastic gel layered over dense memory foam which maintains its shape and cushioning properties. Features include a functional design to disperse pressure and improve the level of comfort to the user when seated. It also features a center relief groove that eliminates soft tissue compre

Gseat Lite

The GSeat Lite is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities. Ergonomically designed for travel and recreation, the GSeat Lite is lightweight and is made with visco-elastic gel layered over dense memory foam which maintains its shape and cushioning properties. Features include a functional design to disperse pressure and improve the level of comfort to the user when sea

Hi D Laminate Cushions (01-8000 Series)

Two layered foam seat cushion. Top inch is high density foam, base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Hi Density Foam Cushion

Hi Density Foam Cushions are foat seat cushions layered in 1-inch thick segments with a knit cover. DIMENSIONS: 16 x 18 inches with thicknesses of 1, 2, 3, or 4 inches.

High Density Cushions (01-4000 Series)

High density foam seat cushion for medium flotation. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 18 by 16 inches by 2, 3, or 4 inches thick. 70 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

High Seat Cushion (Model 16H020)

The High Seat Cushion, model 16H020, is a foam seat cushion designed for use by individuals with lower extremity disabilities. This cushion has a vinyl cover with a wood base. It is designed to take the stress off legs and knees by elevating seating levels when customary furniture heights are too low. It comes with an over the shoulder strap for carrying. DIMENSIONS (HxLxW): 16 x 16 x 4 inches.

High Seat Cushion (Model F76666)

The High Seat Cushion, model F76666, is a foam seat cushion designed to take stress off the legs and knees by raising the seat to a comfortable level. The cushion is made of firm, 6-inch thick polyurethane foam, and comes with a denim cover with a cloth handle and zipper for removal. DIMENSIONS: 15 x 15 inches.

Horseshoe Cushion.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used to relieve pressure on the bony prominences of persons who lack normal sensation and are prone to develop pressure sores. Materials list and directions for making a foam cushion with horseshoe cutout in the back, used on top of a seat board for firm support. Similar to commercial products. Suggestions for a washable cover and anchoring tapes also provided. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Cho

Invacare Absolute & Invacare Single-Density Cushion

The Invacare Absolute is a foam seat cushion designed for use with wheelchairs. This dual-firmness cushion features firmer foam under the thighs and hips and softer foam under the ischials for good weight distribution and comfort. The Invacare single-density cushion is an economy version of this comfort cushion and is available in more than 100 non-standard sizes.

Invacare Comfort-Mate Extra Cushion And Base

The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo

Invacare Personal Seat With Cushion Rigidizer

The Invacare Personal Seat with Cushion Rigidizer is a gel and foam seat cushion designed for use with wheelchairs. This lightweight, contoured cushion uses a combination of foam and fluid for pelvic stability and pressure relief. A slim profile Cushion Rigidizer reduces hammocking and provides a firm, stable base of support.

Invalid Ring (Model F76650)

The Invalid Ring, model F76650, is a foam ring seat cushion designed to take pressure off the tailbone of the user. The cushion is made of polyurethane foam which is hygienic, non-allergenic, and will not support bacteria. The cushion may be hand washed and cold sterilized. DIMENSIONS: 12.5 x 15 x 2.75 inches. COLOR: White.

Invalid Ring - Foam

The Invalid Ring - Foam is a foam ring seat cushion designed to relieve pressure. The molded high compression polyurethane foam ring is offered with choice of a polycotton or plaid fabric cover. OPTIONS: Replacement covers are available. DIMENSIONS: Available in 16.25 x 13 inches, 18.25 x 15.25 inches, or 14.25 x 12.75 inches. COLOR: The polycotton cover is white.

Isch-Dish Pressure Relief Cushion

The ISCH-DISH Pressure Relief Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cordura nylon cover with an elastic back, a moisture resistant core coating and a molded, removable sling-fill insert base. The cushion fea

Isch-Dish Squeeze

The ISCH-DISH Squeeze is a foam seat cushion designed for users of squeeze frame wheelchairs at risk for ischial and coccygeal pressure ulcers. This cushions are designed for use in squeeze frame chairs that drop three inches or more from knee to hip. A modified ischial pocket and pevic support extenders help counteract poor pressure distribution and pelvic positioning. The cushion includes a support core protected by a Durafilm incontinence-proof coating, a machine-washable cover, and a sling-f

Isch-Dish Thin

The ISCH-DISH Thin Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use in lightweight wheelchairs, hemi chairs, office chairs, and car seats by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cover, a moisture resistant core coating and a molded, removable sling-fill inse

J2 Deep Contour Cushion

The J2 Deep Contour Cushion is a gel and foam seat cushion designed for use in wheelchairs by individuals at high risk for skin breakdown. This cushion features a foam base support structure and a longer seat well that narrows toward the rear to accommodate a posterior pelvic position. A Jay Flow Fluid Tri-pad tops the foam base and has a three-dimensional design for superior pressure distribution and to prevent bottoming out. A thick foam insert in the fluid bladder assists in pressure distribu

Jay Active Cushion

The Jay Active Cushion is a gel and foam flotation seat cushion with adductor wedges designed to prevent leaning, slouching and pressure sores, and to encourage correct posture. The cushion has a contoured foam base with a Flolite pad. Flotlite is a liquid that conforms to the user's body and does not return to its original shape; this feature protects the skin from pressure sores. The fluid is encased by three top and two bottom layers of urethane with a center seam that prevents the Flolite fr

Jay Back Cushion

The Jay Back is a foam and gel back support cushion designed to protect against scoliosis, kyphosis, instability, back pain, and skin breakdown. The cushion consists of an impact resistant ABS plastic shell with a middle layer of molded, contoured foam, and a Flolite spinal insert to prevent pressure problems on the spine. Flolite is a gel-like liquid that will conform to the user's body, but resists returning to its original position to prevent pressure on bony prominences. The water-resistant

Jay Combi Posture Seating System

The Jay Combi Posture Seating System consists of two foam cushions, one contoured, dual density seat cushion and one lumbar support back cushion, designed to reduce sitting fatigue, lower back pain, and slumping while promoting correct posture. COMBI SEAT CUSHION: The Combi seat is molded from two different kinds of foam. Inside is a contoured foam core that is firm, for support. Outside, a second layer of soft foam is added for comfort. The foundation resists compression from leaning to help pr

Jay Gs Cushion

The Jay GS Cushion is a gel flotation cushion with a foam base designed for use by children in wheelchairs. Available with or without a pressure relief fluid pad to prevent skin breakdown, the cushion incorporates Jay Flow fluid technology. Its firm polyethylene foam base is pre-contoured with an anti-thrust shelf to keep the pelvis from sliding forward. A variety of secondary supports help to position and maintain optimal pelvic and lower extremity posture. The cushion includes growth capabilit

Jay Protector Cushion

The Jay Protector Cushion is a gel and foam seat cushion designed to temporarily (up to 4 hours) protect the skin against pressure sores in any situation - in the shower, during recreation activities away from a wheelchair, while working on the floor, etc. The cushion has a sling design with waist and leg attachments that maintains the cushion in place during transfers. The cushion has a concealed molded foam base that absorbs impact and assists in stable sitting. On top of the foam core is a Fl

Jay Scooter Seating System

The Jay Scooter Seating System is a portable seating system for powered scooters designed to reduce fatigue and back pain, and to provide more support and stability. The system consists of a Jay Cushion with Quadrant Pad ($385) and a Jay Back ($350). The Jay seat cushion's quadrant pad is divided into four sections to support against leaning and sliding, and is filled with Flolite. Flolite is a gel-like liquid designed to conform to the user's body and to retain the user's form to maximize relie

Jay Standard Wheelchair Cushion

The Jay Standard Wheelchair Cushion is a gel flotation seat cushion designed to prevent and heal pressure sores and improve posture. This cushion features a urethane foam base that is contoured to reduce pressure on the ischials and the coccyx, and to encourage upright posture by discouraging leaning and slumping to one side. On top of the foam base is a Flolite pad. Flolite is a fluid that, once conformed to the user's body, remains in place rather than returning to its original shape to reduce

Kabooti Donut Coccyx Cushion

The Kabooti Donut Coccyx Cushion is a foam ring seat cushion and wedge cushion designed to provide coccyx pressure relief for people with lower extremity or mobility disabilities, spinal cord injury, and others who use wheelchairs or sit for long periods. The Kabooti Cushion provides all of the seating comfort of a ring shaped cushion, coccyx cushion, and traditional seating wedge. Constructed of one-piece molded support foam, this cushion has lobes that improve seating balance. A large center o

Komfort Kush

The Komfort Kush is wedge foam seat cushion with a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. This cushion slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It is constructed of high density poly foam with an ultra-suede cover that is removable for easy cleanup. It has a non-slip bottom and a carrying handle for eas

Laminar & Laminar Iii Cushions

Laminar cushions are a combination of a Pudgee Pad and SunMate cushions (see also separate entries) that have been bonded together to form a very high performance seat cushion designed to meet the needs of individuals with difficult body support requirements. Laminar III cushions are composed of three layers, with a Pudgee Pad placed in between two layers of SunMate foam. The additional layer of SunMate is provided as a degree of insulation from the Pudgee which can feel cold initially in winter

Leg Abductor Cushion (Models 758010, 758015, 758020, & 758025)

The Leg Abductor Cushion is a gel and foam or foam seat cushion with a built-in foam pommel to provide leg separation for individuals who use wheelchairs. The mattress features a safety strap that keeps the cushion in place, and a fluid-proof, wipe-clean vinyl cover to prevent against incontinence. Model 758010 is a foam cushion with a level base and model 758015 is gel and foam cushion with a level base. Model 758020 is foam with a wedge base and model 758025 is gel and foam with a wedge base.

Lumbar Foam Cushion

The Lumbar Foam Cushion is a lumbar support designed for use by individuals in need of additional lower back support while sitting. Made of dense polyeyrethane foam, this cushion cradles the lower back offering additional support and stability. Features include a removable velour cover that fastens at the back of a chair with hook-and-loop fastener for desired positioning. The cover is machine washable. COLOR: The cover is beige.

Medical Restraints Wheelchair Cushions (Model Mr 4011)

Seat cushion fabricated of Gelfoam material includes knitted cloth cover. Standard size is 16 inches by 18 inches by 3 inches.

Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)

The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:

Medline Contour Basic Cushion (Models Msccb1616, Msccb1816, Msccb1818, & Msccb2016)

The Medline Contour Basic Cushion is a foam wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. This single-density foam cushion is contoured to align the hips and legs while reducing pressure on any one area. The cushion's ShearX stretch cover reduces skin shear and is antimicrobial and fluid-proof. The cushion works with sling or pan style seats. DIMENSIONS (LxW): 16 x 16 inches (model MSCCB1616), 16 x 18 inches (model MSCCB1816), 18 x 18 inches

Medline Reclining Back Cushion (Mscbr16, Mscbr18, & Mscbr20)

The Medline Reclining Back Cushion is a foam wheelchair back support cushion designed for use by individuals with mobility disabilities. A replacement for the standard wheelchair sling back, this cushion creates a fixed 10-degree angle of recline. The back support has two layers of high-density foam with a built-in rigid inset and a ShearX all-way stretch cover. The cover reduces skin shear and is antimicrobial and fluid-proof. The back support fits 16-inch wheelchairs (model MSCBR16), 18-inch w

Medline Visco Form Wheelchair Cushion (Models Mscvis1616, Mscvis1816, Mscvis1818, & Mscvis2016)

The Medline Visco Form Wheelchair Cushion is a foam wheelchair cushion designed for use by wheelchair users at risk for pressure sores. The cushion has three different foam layers including high-resiliency (HR) foam and a four-pound visco elastic memory foam. A base layer of dense foam provides structure and support, preventing bottoming out. The visco elastic layer is sandwiched between the HR foam. When the user sits on the cushion the visco elastic foam molds to his/her exact anatomical conto

Memory Foam Cushion

The Memory Foam Cushion is a foam seat cushion designed for use by individuals at risk for pressure ulcers. The foam of the cushion has slow recovery propertiesd, allowing the cushion to slowly remold to the user's body with each repositioning, and allowing increased blood flow to pressure points. DIMENSIONS: 4 x 16 x 18 inches.

Memory Foam Lumbar Support Back Rest (Model 7154Bl)

The Memory Foam Lumbar Support Backrest, model 7154BL, is a foam back support cushion designed for use to provide back support while sitting in a chair. This lumbar roll offers direct support for the lower back region. The cushion's polyurethane foam adapts to the natural contours of the user's back. It has adjustable straps to fit any chair. DIMENSIONS (HxDxW): 6.75 x 3.75 x 14.5 inches. WEIGHT: 2 pounds. COLOR: Black.

Mobility Gseat

The Mobility GSeat is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, especially people who use wheelchairs or mobility scooters. It is designed to fit the seats of most wheelchairs and mobility scooters, and to provide long-term comfort for people who are seated over 12 hours each day. The Mobility GSeat is made with visco-elastic gel layered over dense memory foam which m

Modular Seat And Back Cushions

The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.

Molded Ring Cushion (Models 8014, 8016, & 8018)

The Molded Ring Cushion, models 8014, 8016, 8018, is a foam ring seat cushion designed to conform to the natural body contours. The cushion is made of one-piece puncture-proof molded foam. COVERS: machine washable Dacron/cotton; the cushions are also available uncovered. COLORS: Navy, White, Plaid. Sixteen inch ring is available with fleece cover. SIZES: 14, 16, 18 inches.

Ortho Wedge Seat Cushion

The Ortho Wedge Seat Cushion is a foam seat cushion designed to alleviate pressure on the tail bone (coccyx). This wedge-shaped cushion has a cutout for the tail bone. The wedge shape tilts the pelvis forward for proper seated positioning. Made of resilient polyurethane foam, the cushion has a breathable, machine-washable velour cover. DIMENSIONS: 12.25 x 16.25 inches.

Orthopedic Cushion

The Orthopedic Cushion is a foam seat cushion for persons with lower extremity disabilities. The unique angled seat cushion is designed as a forward sloping wedge with a rear cut out to ease back discomfort by preventing compression of the coccyx, aligning the spine and restoring the natural lumbar curve. Built-in handles add portability. Made of high density foam, the cushion is washable and is available with a choice of a poly/cotton cover or a fleece cover. DIMENSIONS: 14 inches x 19 inches.`

Patient Ring

The Patient Ring is a foam ring seat cushion designed to relieve pressure during long-term sitting. Molded of high-compression polyurethane foam, this cushion includes a waterproof cover. DIMENSIONS: 16.25 x 13 inches. COLOR: The cover is navy.

Pibd (Models 310, 410, & 510)

Two layered foam cushion with built in pre-ischial bar. Sizes: 16 by 16 inches by 3 or 4 inches thick, 16 by 18 inches by 3 or 4 inches thick. Y40 indention load Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Plaid Coccyx Cushions (Models N1001P & N1002P)

The Plaid Cocccyx Cushions are foam seat cushions designed for use in wheelchairs. These cushions have a firm foam base, a coccyx cutout, a removable masonite insert for firm support, and a removable cover. DIMENSIONS: Model N1001P is 3 x 16 x 16 inches and model N1002P is 3 x 16 x 18 inches. COLOR: The cover is plaid.

Pommel Sit-Straight

The Pommel Sit-Straight is a foam seat cushion with a built-in pommel for abduction designed to reduce sacral sitting and to limit forward movement of the pelvis of individuals using sling seat style wheelchairs. The cushion has a concave bottom and a flat top. The pommel reduces the danger of adduction contracture and has a core that extends through the cushion to the cushion base for added stability. The material of the surface of both the cushion and the pommel is made of T-Foam (see separate

Portable Easy Up

The Portable Easy Up, models 1220 and 1221, is a foam seat lift cushion designed to assist individuals to stand up from a seated position. The cushion adds 3 to 4 inches to the height of any chair seat, and acts to position the hips and knees at 90 degrees to make it easier to rise. The cushion comes with a carry strap and a machine washable fabric cover with zipper closure. DIMENSIONS: 15 x 15 x 3 inches (model 1220, $29.95) or 15 x 15 x 4 inches (model 1221, $36). WEIGHT: Under 1 pound. COLOR:

Posey Molded Foam Cushion With Liquicell Interface Technology ( Models 7515, 7516, 7525, 7530 & 7535)

The Posey Molded Foam Cushion with Liquicell Interface Technology, models 7515, 7516, 7525, 7530 and 7535, is a foam seat cushion designed to for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and are at low risk for pressure ulcers or require posture support. This foam cushion has Liquicell fluid filled bladders sewn into the removable cover. It is designed to relieve pressure spots and reduce forward sliding. It is also intended

Posturite And Memory Ii Coccyx Seat Cushion

Foam seat cushion with coccyx cutout in rear. Vinyl leatherette cover with removeable fibreboard insert. Available in Memory II foam which contours to body shape.

Prefant Pillow

Premature infant supine support pillow for infants over three pounds and medically stable. Pillow is constructed of flame retardant urethane foam, covered by vinyl Staph Check 6, with quilted washable slipcover. Foam is contoured to maintain flexed position of infant, with separate head support. Pillows are color-coded by size. Three sizes: Small (tan) for infants 1250 grams to 1800 grams; Medium (blue) for infants 1800 grams to 2410 grams; Large (white) for infants 2410 grams to 3500 grams. One

Premium Guard Visco Foam Cushion (Model 14892)

The Premium Guard Visco Foam Cushion, model 14892, is a foam seat cushion designed for use by wheelchair users. DIMENSIONS (HxLxW): 3 x 16 x 18 inches. WEIGHT: 2.8 pounds. COLOR: Blue. WARRANTY: 1 year.

Pressure Reduction Wheelchair Cushion

The Pressure Reduction Wheelchair Cushion is an air and foam flotation seat cushion designed for use in wheelchairs. This cushion is made to accommodate the buttocks and the thighs while creating maximum pressure relief for the bony prominences. Pressure distribution is created by a layer of gel on top of a layer of foam with a Ventex Recovery 5 cover. The pressure in the pad is controlled by an air valve which allows the support pressure to be varied. DIMENSIONS: 18 x 17 x 4 inches.

Pressure Relief Turning Cushion (Model Ha-4782)

The Pressure Relief Turing Cushion, model HA-4782, is a foam ring seat cushion and turning aid designed for use by individuals who are at risk for developing pressure sores. This doughnut-shaped foam cushion fits the hips to reduce pressure when sitting. It distributes weight evenly and helps the user to maintain the correct posture. It also provides 360 degrees of rotation for turning. A washable cover and non-slip sheet are included. DIMENSIONS: The overall diameter is 400 millimeters and the

Pressure-Check Foam Cushion With Coccyx Cutout (Model 754525)

The Pressure-Check Foam Cushion with Coccyx Cutout, model 754525, is a foam seat cushion designed to relieve pressure on the coccygeal area for people who use wheelchairs. Pressure-Check foam has sections that adjust to the user for uniform pressure distribution. The cushion also features a firm contoured foundation to reduce sling-seat hammocking and spinal pressure. The spray-and-wipe clean nylon cover has straps to secure the cushion to the wheelchair. DIMENSIONS: 16 x 18 x 4 inches.

Prism Elite Cushion

The Prism Elite Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require moderate postural support and offers contours that are intended to promote correct seating posture. The Elite Cushion has three distinct layers: a top layer of soft poly foam; a central layer of pre

Prism Ideal Cushion

The Prism Ideal Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require mild to moderate postural support and offers contours that are intended to promote correct seating posture. The Ideal Cushion has three distinct layers: a top layer of soft poly foam; a central laye

Prism Supreme Cushion

The Prism Supreme Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require moderate to high positioning support and offers pressure distribution relief. The Supreme Cushion has a base layer of high-density polyurethane support foam with leg troughs and abductor contourin

Pro Custom Cushion (Models Sc3022 & Sc3023)

The Pro Custom Cushion, models SC3022 and SC3023, is a foam and gel cushion and pelvic stabilizer designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This cushion has moderate to high positioning and pressure relief features, and can be customized to meet specific positioning requirements. The Pro Custom Cushion has a high resiliency foam base with a pommel and side wedges providing strong pelvic stability and leg po

Profile Sitting Orthosis

The Profile Sitting Orthosis is a wedge foam seat cushion designed to minimize ischial tuberosity pressure. The construction encourages modified anterior pelvic tilt and, consequently, an upright sitting posture, and reduces slouching that can result from using a sling seat style wheelchair without modification. Ischial pressure is relieved by contouring and shaping the rear of the cushion. A pressure distributing layer of T-Foam (see separate entry) interfaces between the shaped cushion and the

Pudgee Orthopedic Pads & Large Pudgee Orthopedic Pads

Pudgee Orthopedic Pads and Large Pudgee Orthopedic Pads are foam cushions of visco-elastic gel-foam with open-cell structure and a soft, doughlike consistency. The material is designed to mold exactly to the body contours with very low tension/shear force, and it provides flotation properties usually found only in pure silicone gel pads. The pads are designed to be used as top layer on another cushion, on car seats, or regular furniture. Pudgee pads are most effective in the prevention and treat

Q-Gel Wheelchair Cushion

The Q-Gel Wheelchair Cushion is a gel and foam cushion designed for use by individuals who use wheelchairs. This cushion features high-density two-ply foam construction. A built-in four-chamber gel pad keeps gel in the area of highest pressure and the fluid gel is covered in a supple bladder for maximum pressure relief. The cushion is covered in specially-formulated StaphChek vinyl. DIMENSIONS (WxDxH): 18 x 16 x 2 inches or 16 x 16 x 2 inches.

Rehab 1 Cushions (Models N1102, N1103, & N1104)

Rehab 1 Cushions are foam seat cushions designed for use in wheelchairs. Made of high-density polyurethane foam, these cushions provide firm seating and pressure relief and come with a zippered cover. DIMENSIONS: Model N1102 is 2 x 16 x 18 inches, model N1103 is 3 x 16 x 18 inches, and model N1104 is 4 x 16 x 18 inches. COLOR: The cover is black.

Relax Duogel Sentinel Wheelchair Cushion

The Relax DuoGel Sentinel Wheelchair Cushion is a gel and foam wheelchair cushion designed for use by individuals who use wheelchairs. This cushion features an anatomically-shaped foam base and combination of Trugel and Flogel for pressure relief. DIMENSIONS(WxDxH): 14 x 14 x 4 inches, 15 x 15 x 4 inches, 16 x 16 x 4 inches, 16 x 18 x 4 inches, 18 x 16 x 4 inches, and 18 x 18 x 4 inches. WEIGHT: 5 pounds. CAPACITY: 300 pounds.

Relax Pleezrelite Wheelchair Cushion

The Relax PleezrElite is a foam and gel wheelchair cushion designed for use by individuals who use wheelchairs. This cushion has a Recovery 5 top with soft, stretchy, fluid-proof antifungal, antibacterial fabric. The cushion also has a Memory Foam Comfort Zone under the Ischial Tuberosities with a semi-solid layer of Xcelgel direct-poured into the middle. The design includes contoured edges and a low profile pommel to support the pelvis and lateral and medial thigh areas. DIMENSIONS(WxD): 16 x 1

Remedease Full Height Backrest (Model 71301)

The Remedease Full Height Backrest, model 71301, is a foam back cushion designed for use to add back support to any chair. This over-sized backrest contains high-density medical-grade, anti-allergenic foam that keeps its shape to support the user for long periods of time. An elastic strap on the cushion adjusts to fit any chair and holds the backrest firmly and securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover. DIMNESIO

Remedease High Profile Backrest (Model 71491)

The Remedease High Profile Backrest, model 71491, is a foam back cushion designed to add lower back support to a work chair. This cushion supports the user's lower back with high-density, anti-allergenic foam that keeps its shape. The cushion's elastic strap adjusts to fit any chair and holds the cushion securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover, DIMENSIONS (HxDxW): 13 x 4 x 12.75 inches. WEIGHT: 1 pound. COLOR:

Remedease Lumbar Roll (Model 71101)

The Remedease Lumbar Roll, model 71101, is a lumbar support and foam back cushion designed to reduce back strain. This high-density foam cushion attaches to the back of a chair and provides direct support to the user's lumbar area. Its high-density anti-allergenic foam keeps its shape for long periods of time. An elastic strap adjusts to fit any chair and holds the backrest firmly in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cove

Retroback

The Retroback is a foam wheelchair back support designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. This cushion is lightweight and durable and is equipped with a chrome-plated steel clip that attaches to the existing sling upholstery. Removing the Retroback is done by simply lifting it off the upholstery. The cushion also features a nylon/polyester water-resistant, machine-washable cover. DIMENSIONS: Available in 16, 18, or 20 inch

Ring Cushion

The Ring Cushion is a foam ring seat cushion designed to relieve pressure for individuals who have difficulty sitting for long periods. The foam is flame retardant. The cushion is not recommended for people who are susceptible to pressure sores. DIMENSIONS: The exterior diameter is 17 inches and the interior diameter is 5 inches; the height is 2.5 inches.

Sacro Ease (Models Rcrx, Rscrx, Rncrx, Brc-Rx, Brsc-Rxm & Brnc-Rx)

The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with th

Saddle Complete Seat

The Saddle Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat drop seat and a Saddle Cushion. The adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform.The cushion also features a

Saddle Cushion, The

The Saddle Cushions are foam, wedge foam, or foam and gel seat cushions designed for use in wheelchairs. Available with or without QuadraGel, these cushions are available in a wedge model that is lower in the back than in the front to prevent the user from sliding or thrusting forward, or in a Zero Elevation model that is the same height throughout. The cushions also feature rounded bottoms to prevent hammocking. The cushions have two layers of HR foam for comfort and a firm bottom layer for sup

Sammons Preston Economy Wedge Cushion (Model 6485)

The Sammons Preston Economy Wedge Cushion, model 6485, is a foam cushion designed for use by individuals at risk for pressure sores/ulcers or who are prone to sliding out of their wheelchair or other chairs. This cushion can be positioned with high part in front to prevent sliding, or in back to assist persons with difficulty rising. DIMENSIONS: The 16.5 inch square cushion slopes from 4.5 to .75 inches.

Sat-A-Lite

Molded polyurethane foam cushion with contoured wedge shape. Handsewn cover in blue or gray velour fabric.

Sciatica Cushion

SCIATICA Cushion is deigned for individuals to help relieve the discomfort of sciatica. The soft cushion is anti-microbial and odor resistant. Polyester/cotton with polyester filling. Removable cover is cotton/polyester. Both are machine washable.

Seat Cushion (Model 96)

The Seat Cushion, model 96, is a foam seat cushion designed for use with wheelchairs. The cushion is fabricated of foam covered with fabric. DIMENSIONS: 2 inches thick.

Seat Cushion (Model Ha-4783)

The Seat Cushion, model HA-4783, is a foam ring seat cushion designed for use by individuals who are at risk for developing pressures sores/decubitus ulcers. This polyurethane ring-shaped foam cushion helps reduce pressure and has a washable cotton cover. DIMENSIONS (HxLxW): 70 x 400 x 340 millimeters. WEIGHT: 370 grams.

Semi-Rigid Wheelchair Foundation (Models 6521 & 6523)

The Semi-Rigid Wheelchair Foundation is a foam seat cushion designed for use in wheelchairs. Designed to provide firm, level seating, this closed-cell foam cushion features a convex bottom to prevent hammocking. Model 6523 includes a non-slip vinyl protective cover. Model 6521 does not include a cover. DIMENSIONS (WxDxH): 18 x 16 x 1.5 inches.

Shs Cushion

Wheelchair seat cushion designed to eliminate hammock effect created by wheelchair sling seat. SHS130 is a low profile cushion constructed of 2 inch medium density polyurethane foam and a 1 inch layer of low density fire retardant polyurethane foam. Beveled anterior edge reduces pressure behind the knee. Cushion is wrapped in rubberized neoprene and has a removable stretch terry cloth cover. Model SHS135 is constructed of a three layer combination of medium density foam, temper foam and low dens

Signature-Fit Custom Cushion

The Signature-Fit Custom Cushion is a foam in place seating systems designed for use in wheelchairs by people with physical disabilities. The Signature-Fit system uses a portable simulator to capture the contours of the body, correcting anatomical deformities when possible and accommodating others. It measures the contours of the seat and back and transfers this information to a computer. The system enables multiple modifications to be made to the cushion measurements. Pressure relief can be pro

Six Piece Modular Positioning Set

The Six Piece Modular Positioning Set consists of foam positioning blocks designed to create individualized occupational and physical therapy treatment programs for persons with varying disabilities. The design accommodates numerous positions within the developmental sequence. The pieces are vinyl-covered, and therefore waterproof and cleanable with soap and water. The set consists of interchangeable rectangles, squares, and triangles (wedges). All sets come with four straps included. SIZES: Thr

Skil-Care Incontinent Resistant Foam Cushion

The Skill-Care Incontinent Resistant Foam Cushions are foam seat cushions designed for use in wheelchairs or geriatric chairs. These high-density foam cushions provide sitting comfort and pressure relief and may be purchased without a cover, with a vinyl cover, or with a nylon cover. Safety ties are included to prevent sliding off the chair. DIMENSIONS: Available in 16 x 18 x 2 inches, 16 x 18 x 3 inches, or 16 x 18 x 4 inches.

Skil-Care Slide-Guard Cushion (Series 7512)

The skil-Care Slide-Guard Cushion, series 7512, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sling-seat hammocking. The foam cush

Skil-Care Slide-Guard Wedge (Series 7513)

Skil-Care Slide-Guard Wedge, series 7513, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions feature a wedge shape and a pommel and are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sli

Skil-Care Ultra Cushion (Models 754310, 754320, & 754330)

The Skil-Care Ultra Cushion is a foam or gel and foam seat cushion designed to provide a firm seating foundation for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a non-compressing firm foundation and a contoured base that rests below the seat frame to enable users to sit lower in the chair. The attached straps secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermi

Skil-Care Ultra Wedge (Series 7541)

The Skil-Care Ultra Wedge is a foam or gel and foam seat cushion designed to provide a firm seating foundation and sliding control for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a fixed wedge shape that resists compression and straps that secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermic gel on top of foam for even weight distribution. The foam model comes

Skil-Care Wheelchair Backrest Cushion (Model 703063)

The Wheelchair Backrest Cushion, model 703063, is a foam back cushion designed for use with wheelchairs. This firm-backed foam-padded cushion is covered in easy-clean vinyl and features tie cords to secure the cushion to the wheelchair push handles. DIMENSIONS: Fits 18 inch wheelchairs.

Softspot Low Profile Back Rest (Model 7151Bl)

The SoftSpot Low Profile Backrest, model 7151BL, is a back support cushion designed for use to reduce back strain while sitting for long periods. This polyurethane foam backrest cushions and supports the lower back and spine, reducing strain and fatigue. Its upper edges are curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape and provides support. The surface is non-ab

Softspot Lumbar Roll Backrest (Model 7150Bl)

The SoftSpot Lumbar Roll Backrest, model 7150BL, is a back support cushion designed for use to improve comfort and posture for individuals who sit in a chair for long periods. This polyurethane foam cushion provides direct support for the lumbar region. The upper edges are softly curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape to maximize support. The surface is n

Softspot Seat Cushion (Model 7152Bl)

The SoftSpot Seat Cushion, model 7152BL, is a foam seat cushion designed for use by individuals to reduce pressure from sitting. The cushion's Therasoft polyurethane foam and softly curved edges distribute weight evenly and help to minimize pressure points. The cushion supports the lower back and spine helping to reduce strain and fatigue. Cut-away contours slope away from pressure points at the coccyx (tailbone), and the cushion's wedge shape helps promote proper seating posture to maintain the

Solid Wheelchair Pad With Nylex Cover (Models Msc019009, Msc019016, & Msc019022)

The Solid Wheelchair Pad With Nylex Cover is a solid foam wheelchair cushion designed for use by individuals with mobility disabilities. The cushion is designed to help prevent the user from sliding forward or out of the wheelchair, and the Nylex cover is fluid-resistant and antimicrobial. Models MSC019016 and MSC019022 are latex-free. DIMENSIONS (HxLxW): 4 x 18 x 16 inches (model MSC019016), 2 x 20 x 16 inches (model MSC019009), or 2 x 18 x 18 inches (model MSC019022).

Special Tomato Soft Touch Liners

The Special Tomato Liners offer light support and comfort for your child with mild to moderate physical involvement. This product can be used to provide light structure for a child who may need additional back or trunk support. The liners are made from soft-to-the-touch materials that won't tear or puncture. The outer skin is impermeable to fluids and easily wipes clean. The liners can be taken from chair to chair (i.e. home, restaurants, airplanes, etc).

Spino Sacral Relief Back Cushion (Models 02-2121 & 02-2221)

Foam back cushion with 1/2 inch base of Tufloat and 1 inch top layer of Velfloat. Extra pressure relief for bony prominences of back. Sizes: 16 by 16 inches by 1 1/2 inches (02-2121) or 18 by 18 by 1 1/2 inches (02- 2221). Includes zippered washable double knit cover. Optional: special widths, depths or thicknesses, cutouts, ties or tabs with snaps.

Standard Back Cushions (02-1000 Series)

Foam back cushions. Sizes: 16 by 16 inches, 18 by 16 inches, 16 by 22 inches, 18 by 22 inches, 16 by 32 inches, 18 by 32 inches. All sizes available in thicknesses of 1, 1 1/2 or 2 inches. Includes zippered washable double knit cover. Optional: special widths, depths and thicknesses, cutouts, ties or tabs with snaps.

Stimulite Bariatric Cushion

The Stimulite Bariatric Cushion is a foam seat cushion designed to prevent decubitus ulcers/pressure sores in wheelchair users. The cushion is made of a perforated honeycomb material that allows air to circulate and moisture to evaporate, which helps to maintain skin integrity and keep the body at ambient temperature. The cushion has three layers of honeycomb material with a flat bottom. An incontinence pad fits between the cushion's top and bottom layer. The cushion is available with either a p

Stimulite Classic & Classic Sling Cushion

The Stimulite Classic and the Stimulite Classic Sling Cushion are foam seat cushions designed for use in wheelchairs. These cushions are made of three layers of honeycomb, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The included cover wicks away moisture to protect the skin. Both the cushion and cover are machine washable and dryer safe. The Classic Cushion is designed for use w

Stimulite Contoured Cushion

The Stimulite Contoured Cushion is a foam seat cushion designed for use in wheelchairs. These cushions are made of three layers of honeycomb, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The included cover wicks away moisture to protect the skin. Both the cushion and cover are machine washable and dryer safe. Models are available for use with flat, stiff upholstery and for use w

Stimulite Contoured Pediatric Cushion

The Stimulite Contoured Pediatric Cushion is a foam cushion designed for use by children at risk for pressure sores. The cushion has a honeycomb structure with a flat bottom and a polyester or sheepskin cover. The cushion is machine washable and dryer safe. DIMENSIONS (LxW): 10 x 10, 12 x 12, or 14 x 14 inches. Cushions are 2.5 inches thick. WEIGHT: 1 to 2 pounds.

Stimulite Corbee Pediatric Cushion

The Stimulite Corbee Pediatric Cushion is a foam seat cushion designed for use by children who use wheelchairs. The cushion is made of a honeycomb material with a flat or sling bottom and comes with a polyester or sheepskin cover. The cover is machine washable and dryer safe. DIMENSIONS (LxW): Available in 10 x 10 inches, 12 x 12 inches, or 14 x 14 inches. The cushion is 2 inches thick. WEIGHT: 1 to 2 pounds.

Stimulite Slimline Cushion

The Stimulite Slimline Cushion is a foam seat cushions designed for use in wheelchairs. This cushion is made of three layers of honeycomb material, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The cushion is machine washable and dryer safe. The cushion is available with a flat or sling bottom and with a polyester or sheepskin cover. DIMENSIONS (WxD): 14 x 16, 16 x 16, 16 x 18, 18

Stimulite Sport Cushion

The Stimulite Sport Cushion is a foam seat cushion designed for use by individuals who use wheelchairs. This cushion provides shock bbsorption, ventilation, and stability during wheelchair sport activities. It is made from a honeycomb material with a flat bottom, and is available with either a polyester or sheepskin cover. The cushion is machine washable and dryer safe. DIMENSIONS (LxW): 14 x 16, 16 x 16, 16 x 18, 18 x1 6, 18 x 18, 18 x 20, 20 x 16, 20 x 18, or 20 x 20 inches. The cushion is 2 i

Sunmate Seat Cushion

The SunMate Seat Cushion is an open cell, contouring foam seat cushion designed to relieve pressure and absorb shock. The cushion is available in a choice of seven pressure qualities ranging from extra soft through hard. OPTIONS: Waterproofing and covers available. DIMENSIONS (WxD): Standard cushions are available in 16 x 16 or 16 x 18 inches and a choice .5, 1, 2, 3, or 4 inches thick. Custom dimensions are available

Super Seat (Model R455), Seat Cushion (Model R456), & Super Mattress (Model R457)

The Super Seat, Seat Cushion, and Super Mattress, are eggcrate foam products designed to allow better weight distribution and air circulation for prevention of decubitus ulcers. The materials are flame retardant and lightweight. DIMENSIONS: The cushion (model R456) is 17 x 17 x 4 inches; the Super Seat (model R455) measures 36 x 18 inches; and the mattress (model R457) is 36 x 74 x 1.75 inches.

Super Star Cushion (Models 3032 & 3033)

The Super Star Cushion, models 3032 & 3033, is a foam seat cushion designed for use by less active wheelchair users who require moderate to high lateral stability and moderate to high pelvic and leg support. This cushion is composed of high resiliency polyurethane and visco foam layers built around an aggressive internal ischial and lateral wedged structure that provides forward and rearward pelvic stability and leg positioning. The internal wedged design provides additional trochanteric sup

Supportpro Complete Seat

The SupportPro Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat Drop Seat with a SupportPro Cushion. The adjustable seat platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. A SupportPro

Supportpro Wedge Cushion

The SupportPro Wedge Cushion is a wedge foam or foam and gel seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion is lower in the back than in the front to prevent the user from sliding or thrusting forward. The cushion also features a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer uti

Supportpro Zero Elevation Cushion

The SupportPro Zero Elevation Cushion is a foam or foam and gel and foam seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion features a linear design with the same height from front to back and a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in

Supra Sofgel Cushion

The Supra SofGel Cushion is a gel and foam cushion designed for use in wheelchairs. This cushion has a foam base, a gel bladder, and a top layer of foam surrounding the gel bladder. The cover is synthetic fleece on top and waterproof vinyl underneath. DIMENSIONS (HxDxW): 3.5 x 16 x 18 inches. CAPACITY: 250 pounds.

T-Gel Cushion & T-Gel Plus Cushion

The T-Gel and T-Gel Plus Cushions are gel flotation seat cushions made of T-Gel, an elastomeric gel with the consistencey of fatty tissue that will slide and move laterally to reduce shear forces. T-Gel will not leak or dryout, and can be cut without harm. The T-Gel Plus Cushions have the same features of the T-Gel Cushions, but with an added layer of 1-inch thick medium T-Foam (see separate entry), a pressure-relieving open-cell foam designed to provide shear reduction, self-molding pressure re

Teddy Tucker Infant Seat Liner

Teddy Tuckers Infant Seat Liner is a cushion support designed to work in most any type of infant seat. It is also designed to help support and cuddle the baby's total body and to protect it from hot or cold surfaces. This infant product is machine washable and is available in the following type of designer cushions: Teddy bear, panda, duck, lamb or clown. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.

Temper Foam Wheelchair Cushions (Models T36, T38, T41, & T47)

Temper foam cushion is a visco elastic foam material that contours to the body. It is available in a variety of thicknesses and densities: T 36, very soft. T 38, soft. T 41, medium. T 47, hard. It comes with a polyester double knit cover. Seat cushions available 16 by 16 inches, or 16 by 18 inches.

Temper Foam Wheelchair Cushions (Models T36, T38, T41, & T47)

The Temper Foam Wheelchair Cushionis a foam seat cushion designed for wheelchair use. These lightweight foam cushions flow under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.They also soften under pressure, temperature increase, and/or humidity and transfer moisture away from the body. Highly resilient, the foam slowly returns to its original form after compression, thus reducing back pressure. The cushions are available in soft, medium, or firm supp

Tufloat Cushions (01-3000 Series)

Foam seat cushions for medium to high flotation. Sizes: 16 by 16 inches by 2, 3, or 4 inches thick; 18 by 16 inches by 2, 3 or 4 inches thick. 90 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special depths or widths, and naugahyde, shelterite or synthetic lambswool covers.

Tumble Forms 2 Tadpole Pediatric Positioner (Model 4772T)

The Tumble Forms 2 Tadpole Pediatric Positioner, model 4772T, is designed specifically for early intervention programs serving infants from birth to three years of age with cerebral palsy, motor delays, or other motor dysfunctions. The Tadpole allows the therapist to position the child/infant in prone, seated, postural drainage, and side-lying positions. The unit includes the base, one half roll with lateral supports, a half roll, a positioning strap, and a tray with mirror. It also comes comple

Tush-Cush & Car-Cush

The Tush-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, the cushion has a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable cover. The Car-Cush is a smaller version of the Tush-Cush and offers the same features. The Tush-Cush is available with a choice of a velour cover, a coated vinyl generaltional fabric cover, or a faux leather c

U Form Deep Contour Back

The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg

Ulti-Mate Cushion

The Ulti-mate Cushion is a foam seat cushion designed for use with wheelchairs. This cushion features built-in pre-ischial bar to transfer weight from ischial region to posterior thigh, lateral bevels on underside of cushion to accommodate the sling of the wheelchair for optimal base of support, and built-in leg channels to promote neutral leg position and help stabilize upper body. The cushion uses a combination of foams which adjust to different body weights and sizes, including a top layer of

Ultra Comfort Wheelchair Cushion

The Ultra Comfort Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility disabilities. This cushion has a gel-like inner core. The top of the cushion is made of anti-microbial fabric and the bottom half is made of nylon pack cloth. A built-in fabric handle aids in carrying. DIMENSIONS: 17.5 x 18.5 x 2 inches. CAPACITY: 325 pounds.

Vel Float Wheelchair Cushion (01-1000 Series)

Cushion is constructed of high resiliency medium firm, open cell polyurethane foam. Polyester knit covers with wraparound zippers are provided and included in cushion price. Special sizes available on order at extra cost. Standard sizes are 16 inches by 16 inches by 2, 3 or 4 inches, and 18 inches by 16 inches by 2, 3 or 4 inches.

Viscoride Wheelchair Cushion

The ViscoRide Wheelchair Cushion is a foam seat cushion designed for use by individuals who use wheelchairs. Made from Antimicrobial enhanced TEMPUR material, this lightweight cushion is designed to provide optimal pressure management, while maintaining proper positioning. The cover is made from 100 % polyurethane multi-stretch fabric that is liquid safe, removable, and machine washable. DIMENSIONS: 18 x 16 inches, 18 x 18 inches, 16 x 16 inches, or 20 x 18 inches. WEIGHT: 5.3 pounds. CAPACITY:

Wedge Ease

The Wedge Ease is wedge foam seat cushion that slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It has a removable insert in that when removed, forms a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. It is constructed of poly foam and memory foam with a cover that is removable and washable. It has a non-slip bottom. DIM

Wedge Foam Cushion (Models 6520, 6520B, & 6520L)

The Wedge Foam Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion gently rotates the hips back to prevent forward sliding. The Staph-Chek cover wipes clean. DIMENSIONS: Models 6520 and 6520B are 18 inches wide and model 6520L is 20 inches wide. The cushion tapers from 4 inches high in the front to 2 inches high in the back. COLOR: Model 6520 and 6520L have two-color pink and blue covers and model 6520B is blue.

Wedge Pommel Cushion (Models 6522P & 6522L)

The Wedge Pommel Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion features a pommel, promotes hip abduction and proper knee alignment, and the wedge design prevents forward sliding. The convex bottom provides a stable foundation and eliminates seat hammocking. The cushion is covered in water-repellent non-slip vinyl. DIMENSIONS: Model 6522P is 18 inches wide and model 6522L is 20 inchesw wide.

Wedged Cushions (Models N2001 & N2002)

The Wedged Cushions are wedge foam seat cushions designed for use in wheelchairs. These cushions taper toward the back to prevent the user from sliding forward in the chair. The cushions have a removable zippered cover. DIMENSIONS: Model N2001 is 3 x 16 x 18 x 1.5 inches and model N2002 is 4 x 16 x 18 x 1.5 inches. COLOR: The cover is navy.

Wheelchair Cloud Cushion

The Wheelchair Cloud Cushion is an eggcrate foam cushion designed for use in wheelchairs. The convoluted foam cushion relieves pressure on pressure points and includes a fleece cover. DIMENSIONS (WxDxH): 18 x 16 x 4 inches.

Wheelchair Cushion (Model F76654-0003)

The Wheelchair Cushion, model F76654-0003, is a foam seat cushion made of polyurethane foam. The cushion has a removable cover made of PVC coated white knit nylon iwth a cotton binding. The material is sanitized to guard against mildew and fungus growth. The cover is machine washable and may be tumble dried. DIMENSIONS: 18 x 16 x 3 inches.

Wheelchair Cushion (Models 7601, 7602, 7603, 8020, 8021, & 8025)

The Wheelchair Cushion, models 7601, 7602, 7603, 8020, 8021, 8025, is a foam seat cushion with a high density foam core designed for soft even support. All covers are removable for easy care. OPTIONS: customs sizes available; model 8025 is a 16 x 18 x 2 inch convoluted polyfoam cushion with plaid cover. COVERS: beige naugahyde provides a waterproof, flame retardent surface; plaid or blue cotton/poly blend also available. DIMENSIONS: 16 x 18 inches, 2, 3 or 4 inch thicknesses.

Wheelchair Cushion - Foam

The Wheelchair Cushion - Foam is a foam seat cushion designed for use by individuals who use wheelchairs. The polyurethane foam cushion is available with a choice of a plaid fabric cover or a waterproof rip-stop nylon cover. DIMENSIONS: 16 x 16 inches or 16 x 18 inches, both in a choice of 2, 3, or 4 inches thick. COLOR: The warerproof cover is navy.

Wheelchair Cushion - Foam Wedge

The Wheelchair Cushion-Foam Wedge is a wedge foam seat cushion designed for use in wheelchairs. This urethane foam cushion positions the user toward back of the wheelchair without restraints and inhibits sliding or slumping. The cushion is available with a choice of a plaid fabric or a rip-stop nylon cover with or without ties. DIMENSION: 16 x 16 inches or 16 x 18 inches, both with a choice of 3- or 4-inch thicknesses tapering to 1 inch thick.

Wheelchair Cushion - Latex

The Wheelchair Cushion - Latex is a foam seat cushion designed for use by individuals who use wheelchairs. The latex foam cushion features symmetrically-spaced holes to provide cool, comfortable seating. A removable, washable plaid fabric cover is standard. DIMENSIONS: 16 x 18 x 2, 3, or 4 inches.

Wheelchair Cushion With Center Board

Foam seat cushion with a masonite insert to eliminate the sage from conventional wheelchair upholstery. Zipperd cover , poly/cotton or 10 ounce canvas. Non-skid bottom on cover. Made to exact dimensions.

Wheelchair Cushions

Variety of wheelchair foam seat cushions. Cloth, nylon or Naugahyde covered. DIMENSIONS: 16 x 16 inches or 16 x 18 inches.

Wheelchair Pad With Horn And Nylex Cover (Models Cbc16X16 & Msc019004)

The Wheelchair Pad With Horn and Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. This solid foam cushion has a horn and is designed to help prevent the user from sliding forward or out of the wheelchair. The Nylex cover is fluid-resistant and antimicrobial. Model MSC019004 is latex free. DIMENSIONS (HxLxW): 3 x 18 x 16 inches (model CBC16X16) or 3 x 18 x 18 inches (model MSC019004).

Wheelchair Wedge (Series 7540)

The Wheelchair Wedge is a foam or gel and foam wheelchair seat cushion designed to prevent user sliding in the chair. Offered in foam or foam and gel with a choice of a soft or firm foundation, the Wedge can be ordered with a polyester cover, an incontinence-proof vinyl cover, or with the vinal cover and a launderable fabric cover. The vinyl-covered wedge has a top and bottom of different colors as a reminder to reposition periodically. DIMENSIONS: Available in 16 x 18 x 6 x 3 inches or 16 x 18

Wheelchair Wedge Cushion (Model H76670)

The Wheelchair Wedge Cushion, model H76670, is designed for placement in a wheelchair with the high edge forward to prevent the user from sliding off. In a reversed position, the high edge in the back assists rising. Ties at all four corners secure the cushion to the wheelchair frame. The polyurethane foam cushion has a denim cover with a zipper for removal and laundering. DIMENSIONS: 16.5 x 16.5 x 4.5 inches.

Wheelchair Wedge.

Foam wedge. Approximately 6 inches long, 16 inches wide and 2 inches high. May be used in pairs, high sides to front and back, to prevent person from sliding out of chair.

Yogaback Posture Cushion For Driving

The YogaBack Posture Cushion for Driving is a back support cushion designed for use by drivers with lower back pain. This polyethylene foam cushion features sacral and thoracic pads that attach with Velcro to the inside back surface of the cushion's fabric cover. The pads are infinitely height adjustable. The cushion has a slim profile so the user will not be pressed forward in the car seat. The cushion's depth is adjustable with a choice of two different pad thicknesses. The cushion comes with

Zero Elevation Foam Cushion (Models Mscze1616, Mscze1816, & Mscze2016)

The Zero Elevation Foam Cushion is a foam wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. Designed not to add height to the wheelchair seat, this cushion has a soft top layer and a firm bottom layer, with a curved front edge to minimize contact with the user's thighs, a non-skid bottom with a strap, and a ShearX all-way stretch cover to reduce skin shear. The cover is anti-microbial and fluid-proof. DIMENSIONS (LxW): 16 x 16 inches (model MSCZ

 
Processing...


Driving Walking/Biking Public Transit  Get Directions