Bowling

Results: 26

Adjustable Bowling Ball Pusher

The Adjustable Bowling Ball Pusher is a bowling ball pusher designed for use by individuals with mobility and upper extremity disabilities. The device may be used from a wheelchair or from a standing position and is used to push and guide the ball down the alley. This unit features a padded extension handle that lengthens for use and shortens for storage and transport. The inverted C-shaped pusher at the end has plastic caps on each arm to protect the floor surface. DIMENSIONS: 38 inches long an

Aluminum Bowling Ramp, Two-Piece (Model H712061000)

The Aluminum Bowling Ramp, Two Piece, model H712061000, is a bowling ramp designed for use by individuals with upper extremity, mobility, or balance disabilities. This ramp can be used while seated or standing. The ramp is placed at the front of a lane and lined up for a direct path to the pins. The bowler simply gives the ball a slight push to send it rolling down the alley. The unit is made of high-strength aluminum alloy with a clear anodized finish and includes a "U" frame and one-piece ramp

An Adapted Bowling Device For Severely Disabled Individuals.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted bowling device that permits severely involved cerebral palsied students to participate in the activity of bowling. A release aid is attached to a bowling ramp that is activated by slight pressure on a large switch. Aid is constructed of piece of plywood 7 inches by 4 1/2 inches with a rectangular hole cut into it. Permanent 12 volt DC motor is used to rotate a metal arm which holds and releases the bowling ball. SKILLS REQUIRED: Woodworking. AU

Boccia Ball Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only limited use of one arm to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in var

Boccia Ball Ramp 2

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has only head movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. To adjust the length of the run, a variable set of legs allow an assistant to raise the lower end of the ramp to various heights as directed by the player. The higher the ramp is raised, the shorter the run. At the top of the ramp, an adjustable support can be placed in various posi

Boccia Ball Ramp 3

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair and has limited movement to play boccia ball. The top of the ramp rests on the arms of the user's wheelchair and extends to the floor. The top of the ramp is on a swivel, enabling the user to turn the ramps to aim. To adjust the length of the run, the user changes the ball release position on the ramp. TITLE: The Boccia Ball Ramp 3. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ramp4.htm.

Boccia Ball Track

The Boccia Ball Track is designed to enable a wheelchair user to play boccia ball. The track is similar to a bowling ball ramp. The track consists of a 4-inch diameter PVC pipe cut in half with a 20-degree angle at the lower end. The track is mounted on a wheelchair and is used to accelerate a boccia ball. PROTOTYPE DEVELOPMENT: Designed by Colin Knauf for wheelchair users unable to play boccia ball because the ball must be thrown along the floor from a standing position. This device is intended

Bowling Ball Guide.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Guide to position bowling ball on lane for persons unable to control ball in standard way. A bowling ball ramp is made from welding pipes is a ramp configuration. It is important to place the two parallel rods at the right distance apart or the ball will drag. Includes picture. SKILLS REQUIRED: Welding. AUTHOR: Dan Golden, CETA Welding instructor, Wisconsin Indianhead Technical Institute, 1019 South Knowles Ave., New Richmond, WI 54017, 715-246-6561. T

Bowling Ball Holder Ring

The Bowling Ball Holder Ring is designed to assist individuals in a wheelchair hold a bowling ball. The aluminum holder attaches to the front arm rest and may be used with most wheelchairs. The steel ring mounts in the holder support the bowling ball. The holder is one piece with no nuts or bolts.

Bowling Ball Pusher (Model H71205)

The Bowling Ball Pusher is designed to assist individuals with limited use of their arms or legs to bowl from either a standing or seated (wheelchair) position. There are two models of pushers: Model H71205-0000 is made of plated steel and aluminum with plastic ball caps to protect the floor surface. The handle lengthens for use and shortens for transport or storage. Model H71205-0001 has a triangular base, the bottom edge of which is sheathed in a plastic ribbed coil to protect the floor from s

Bowling Ball Ramp (Model 7910)

The Bowling Ball Ramp, model 7910, is designed for use by wheelchair users to direct bowling balls down the bowling alley. It is made of durable chrome plated steel. Rubber tips at support end and scuff guards at the opposite end to protect floor are included. The unit disassembles into three sections for transport and storage. DIMENSIONS: 26 x 62 x 25 inches. WEIGHT: 49 pounds.

Bowling Ramp

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a powered wheelchair and has limited movement to bowl. The ramp shown is made of strong light tubular steel. The height is set to just clear the wheelchair armrests and controls. The horizontal portion of the ramp at the top is very slightly past the horizontal so the ball stays there until gently pushed forward. To maximize speed, the upper portion of the ramp is straight and the lower half has a gentle curve to the horizontal.

Bowling Support

CUSTOM ADAPTATION PURPOSE: To provide an individual with balance disabilities support while bowling. This support has a plywood base to which are bolted two upright lengths of steel water pipe.Two bends connect at the top to create an inverted U, which serves as a handgrip. The support is designed to be light enough to be moved as needed. DIMENSIONS: The base is 100 x 50 centimeters and the handgrip is 86 centimeters high. The upright pipes are 33.7 millimeters in diameter. TITLE: Bowling Along

Champramp

The ChampRamp is a bowling ramp designed for use by individuals with balance, mobility, or lower extremity disabilities. It can be used while seated in a wheelchair or chair, or while standing. The unit allows hands-free placement of the ball at the top of the ramp, with smooth ball release and no ramp movement, shifting, or vibrations. There is a ball guide line on top of the ramp, with a front adjustable guide and operating instructions on the ramp and in the ramp handle. The main support is

Deluxe Bowling Ball Pusher

The Deluxe Bowling Ball Pusher is designed for use by individuals with limited strength or mobility. This steel and aluminum device may be used from a standing position or from a wheelchair and consists of a long padded handle attached to jaws that grip the ball; caps on the tips of the jaw protect the floor from scratches. The handle extends for use and can be shortened for storage and transport. DIMENSIONS: Adjusts from 38 to 54 inches long. WEIGHT: 4 pounds.

Dino Skin Foam Bowling Ball (Model W7880)

The Dino Skin Foam Bowling Ball, model W7880, is a modified bowling ball designed for use by individuals with upper extremity disabilities. Pre-drilled for both large and small hands, this regulation-sized coated foam ball gives when gripped. This ball is weighted for ease in gripping and rolling. WEIGHT: One pound.

Economy Bowling Ball Pusher

The Economy Bowling Ball Pusher is designed for use by individuals with limited strength or mobility. The device consists of a coated steel triangular ball guide attached to a coated steel shaft with a soft sleeve that slides to the optimal position for the bowler; a gripping handle is attached to to the end of the shaft. The trianglular ball guide rests on the floor and centers the ball to be pushed. The coating protects the floor from scratches. DIMENSIONS: 38 inches long. WEIGHT: 3 pounds.

Freestanding Bowling Ramp (Model W9972)

The Freestanding Bowling Ramp, model W9972, is designed for use by individuals who use wheelchairs, or who have balance or upper extremity disabilities. This ramp features steel pipe construction with a chip-resistant finish and no-slide rubber feet. The ramp is raised at the back to enable direct wheelchair access. The user sets the bowling ball on the top of the ramp and pushes it down the ramp, launching the ball down the alley. DIMENSIONS (WxLxH): 26 x 62 x 25 inches. COLOR: Bright chrome.

Freestanding Chrome Bowling Ramp

The Freestanding Chrome Bowling Ramp is a bowling ramp designed for use by individuals with mobility, upper extremity, or balance disabilities or spinal cord injury. Bowlers can sit or stand while using the ramp. This portable ramp is made of strong steel pipe and has four no-slide rubber feet. The unit disassembles for transportation or storage. DIMENSIONS (HxLxW): 25 x 62 x 26 inches. COLOR: Chip-resistant bright chrome finish.

Handle Grip Bowling Ball

The Handle Grip Bowling Ball is a modified bowling ball designed for use by individuals with upper extremity disabilities. This bowling ball is modified with a spring loaded handle designed to allow a regulation ball to be used by persons who cannot use a conventional three-fingered ball. The handle retracts into the ball automatically upon release. WEIGHT: 8, 10, 12, 24, or 16 pounds.

Ikan Bowler

The IKAN Bowler is a bowling ramp designed for use by individuals who use wheelchairs. Mmade of aluminum with a baked-on powder coat finish, stainless steel and PVC plastic, the unit attaches to virtually any straight or sports-style foot rests, including center post wheelchairs. This system enables the bowler to control the speed, direction, and timing of the bowling ball's release. Wheelchair movement and the parabolic bowling arm generate the energy to propel the ball down the lane. Braking t

Kids Mini Bowling Ramp

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized adaptation of a bowling ball ramp for a child with severe disabilities. This adaptation began with calculating how long and wide the ramp needed to be. The ramp needed to be narrow enough so the ball would not fall through but this can be adapted depending on the child’s size. The top portion sides are approximately 10 inches long, the cross pieces are 4 inches. The long portion consists of two 18 inch pieces with a straight co

Poss-I-Bowl 2000

The Poss-I-Bowl 2000 is a bowling ball pusher that individuals who are able to operate a single switch to participate in bowling. The Poss-I-Bowl 2000 can be attached to any tubular bowling ramp and it enables the bowler to release the ball down the alley with the touch of a switch. The device is completely portable and can fit into a large purse. POWER: 9-volt battery. OPTIONS: Instructor override switch and carrying bag. WEIGHT: 1.5 pounds.

Steel Bowling Ramp, Two Piece (Model H712062000)

The Aluminum Bowling Ramp, Two Piece, model H712062000, is a bowling ramp designed for use by individuals with upper extremity, mobility, or balance disabilities. This ramp can be used while seated or standing. The ramp is placed at the front of a lane and lined up for a direct path to the pins. The bowler simply gives the ball a slight push to send it rolling down the alley. The unit is made of steel with a clear, baked-on plastic finish and includes a "U" frame and one-piece ramp track. The U-

Two Piece Steel Bowling Ramp

The Two-Piece Steel Bowling Ramp (Item No. 2391802) has two parallel tubes that are positioned by the user to guide the bowling ball and provide it with momentum to reach the bowling pins. The ramp can be approached by a wheelchair user from the back or the side. The ramp disassembles into two parts for transport and storage.

Two-Piece Bowling Ramp

The Two-Piece Bowling Ramp is designed for use by individuals with limited strength and mobility. Constructed of steel tubing with a baked-on plastic coating, this ramp consists of an inverted U-shaped rear frame attached to a sloping track. The rear section is detachable for storage and transport. This accessible device can be used from a wheelchair or from a standing position. To use the ramp, the ball is placed at the top of the ramp where it joins the rear frame and the player pushes the bal

 
Processing...


Driving Walking/Biking Public Transit  Get Directions