Hand Orthosis

Results: 77

Acor Custom Hand Orthosis

Acor Custom Hand Orthosis is a wrist and forearm splint made of leather. Closure options include velcro straps, eyelets, hooks, or laces. This splint is available with steel or plastic reinforcement stays for added support, and can be manufactured extra rigid for maximum support or very soft for moderate support. COLORS: Brown or buff.

Arthroscopic Traction Assist

The Arthroscopic Traction Assist is a hand splint designed to hang from a traction device to provide proper positioning of the shoulder during arthroscopic surgery and as an assistive suspension device for upper extremity fracture reduction. The orthosis is comprised of a foam lined, hypoallergenic, linear polyethylene plastic with a padded dorsal tongue that enables it to provide rigid cast-like protection. It is customizable using a heat gun and scissors. One presewn double layer cotton stocki

Carpal Gel Pad

The Carpal Gel Pad is a hand orthosis designed for use by individuals with carpal tunnel syndrome. This contoured polymer gel pad is designed to reduce scarring and hypersensitivity at the incision site following carpal tunnel surgery. Filled with mineral oil, the pad has adhesive on the back that allows it to be attached to the inside of Wrist Lacers, V Straps, Motion Managers, Freehand Wrists, Compressor Wrist, and Ryno Lacers.

Chatta-Grip

The CHATTA-Grip is a hand orthosis designed to prevent contractures due to immobility. This soft splint features a variety of palmar additions to address different degrees of finger flexion and extension. Available for the right or left hand, this washable splint is malleable to accommodate different degrees of wrist flexion/extension. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

Chatta-Rest

The CHATTA-Rest is a hand orthosis designed to prevent contractures due to immobility. This soft splint is a resting hand splint which inhibits flexion of the wrist and fingers . Available for the right or left hand, this washable splint is malleable to provide a custom fit. A laundry bag and an extra cover are included. SIZES: Small, medium, and large.

Cock-Up Wrist Splint

The Cock-Up Wrist Splint is a hand and wrist support for individuals with a variety of conditions resulting from injury or illness. The splint is designed to provide wrist support for dynamic splinting, and to be useful for post-fracture support, tendinitis, carpal tunnel syndrome, and sprains or strains. It may also be used in cases of general wrist weakness, to correct deformity, or for peripheral nerve injuries. The Cock-Up Splint is made of 1/8-inch neoprene and features a sewn-in positioner

Dynafoam Arthritic W.h.o. (Models 1065 Thru 1070)

The Dynafoam Arthritic W.H.O. (wrist/hand orthosis) is a night splint designed to position the wrist and fingers in normal anatomical alignment and to discourage ulnar drift of the wrist and fingers. The brace is made of Dynafoam, a foam material that provides high resiliency and innate dynamic forces when compressed or stretched. The orthosis has a Velcro fastener system to secure it to the area. SIZES: Available for left or right hand models; Small (##1065, ##1066), Medium (##1067, ##1068), an

Dynafoam Functional Hand Positioner (Models 1106 & 1107)

The Dynafoam Functional Hand Positioner ##1106/##1107 is a hand orthosis designed to abduct and extend the fingers with the thumb in opposition. The splint is made of open-cell, breathable Dynafoam. The user inserts the fingers and thumb into the foam, and the splint is secured with a strap which wraps around the wrist "figure 8" style and fastens with Velcro closures. SIZES: All models fit either the left or right hand; Small (##1106) or Large (##1107).

Engen Plastic Hand Orthosis (Epho), Reciprocal Wrist Extension, Opponens Orthosis With Forearm Support, & Opponens Orthosis

These four modular systems for upper extremity orthotics are designed for a variety of positioning and functional applications. The Engen Plastic Hand Orthosis (EPHO) provides metacarpal arch support and stabilizes the thumb in a position of prehension while allowing passive finger motion. The unit may be heat reshaped for individual modifications. Non-reinforced modules are available for supportive applications, as are radially reinforced modules for adaptations requiring stable mechanical join

Freedom Resting Hand Mitt Splint (Model 57210)

The Freedom Resting Hand Mitt Splint, model 57210, is a hand orthosis designed for use by individuals with upper extremity disabilities. Available for the right or left hand, this splint supports the arches of the hand and the thenar web space. It maintains the metacarpal phalangeal (MP) joint in approximately 80 degrees of flexion to protect future hand function. Made of featherweight AliLight material, this splint accommodates edema and can be customized with a heat gun. SIZES: Small, medium,

Hand Splint

Hand splints. Vinyl coated aluminum, with or without foam padding. Variety of forearm and cock up wrist splints, and whole hand platform splints.

Hand Splint 7 Inch (Model 08357)

The Hand Splint, 7 Inch, model 08357, is a hand orthosis designed for individuals with upper extremity disabilities. This splint is made of elastic with aluminum spoon for added support and is available for the right or left hand. SIZE: Small, medium, large, and extra large. COLOR: White

Hemiplegic Hand Orthosis

The Hemiplegic Hand Orthosis is a Kydex and aluminum hand orthosis designed to replace the hemiplegic platform splint. The Volar Kydex hand and thumb piece is adjustable with a heat gun; the dorsal aluminum arm frame is padded with Plastazote, and the wrist hinges can be locked at any angle and set with the rivet. The brace is secured with a Velcro closure. SIZES: In the kit, Small (for up to 3.25 inches across MP joints), and Large (over 3.25 inches across the MP joints); Assembled orthoses, or

Imak Smartglove

The IMAK SmartGlove is a wrist support designed for use by individuals with upper extremity disabilities, arthritis, carpal tunnel syndrome, tendonitis, or other wrist and hand pain. This orthosis holds the hand and wrist in a neutral position while allowing full use of the hand. It is made of washable, latex-free cotton Lycra and provides flexible support for full use of the hand. An ergoBeads pad, located on the underside of the orthosis, cushions and protects the wrist. The orthosis is revers

Imak Smartglove With Thumb Support

The IMAK SmartGlove with Thumb Support is a wrist and forearmarm splint with thumb support designed for individuals with carpal tunnel syndrome, arthritis, and other wrist and thumb pain. This orthosis helps keep the wrist in an ergonomically correct position, while adding stability and support to the thumb. It is made of washable, latex-free cotton Lycra and provides flexible support for full use of the hand. An ergobeads pad, located on the underside of the orthosis, cushions and protects the

Lmb Wire-Foam Resting Hand Splint

The LMB Wire-Foam Resting Hand Splint is a hand orthosis designed for use with individuals with upper extremity disabilities. Made with high- quality Wire-Foam construction, this splint allows a customized fit and has a malleable frame for static progressive splinting. Removable criss-cross wrist straps help secure the wrist. This splint is available for the right or left hand. OPTIONS: Finger Deviation Strap. SIZES: Small, medium, or large.

Merit Static-Progressive Component

The MERiT Static-Progressive Component is a finger extension or flexion component designed for use by individuals with disabilities of the fingers. This metal component aids in gaining flexion or extension of the joints of the thumb, finger, wrist, or elbow. The unit provides direct controlled static tension for use in place of dynamic graded springs or rubber band splinting. Tension of pull can be adjusted by simply turning the thumb screw.

Mini Thumb Support With Moveable Stabilizer (Model 9015)

The Mini Thumb Support with Moveable Stabilizer, model 9015, is a hand orthosis designed to provide warmth, compression, and stabilizing support for the thumb. The neoprene wrap-around brace fits any hand and the thumb area can be cut to the desired length. COLOR: Tan.

Mit Dynafoam Wrist And Hand Orthosis (Models 1057 Thru 1064)

The MIT Dynafoam Wrist and Hand Orthosis is designed to encourage and maintain normal extension of the wrist, fingers, and thumb joints. This contoured foam splint "sandwiches" the hand and provides an anatomical position of 10 degrees wrist dorsiflexion and normal finger and thumb extension and abduction. Dynafoam is a compression foam that provides volar and dorsal extension force to the hand and wrist, which decreases as flexed joints assume a normalized extended position. 2 Velcro cinch stra

Mobile Arm Support (Series 7062)

The Mobile Arm Support, series 7062, is a hand orthosis and elbow support designed for use by individuals with upper extremity disabilities who use wheelchairs. Available in models for the right or left arm, and in a choice of level or elevated support, the units rests on the wheelchair arm and includes straps to maintain proper arm positioning. Covered in spray-and-wipe clean nylon, the removable arm trough is constructed of high-density foam for comfort.

N-Abler Iii Wrist / Hand Orthotic (W.h.o.)

The N-Abler III Wrist/Hand Orthotic (W.H.O.) is a hand orthosis designed to enable individuals with upper extremity amputation or disability to utilize tools and utensils. Available in a soft model or a carbon fiber model, this device can be used with the N-Abler II (not included; see entry) by individuals with prosthetics or by individuals without prosthetics. OPTIONS: Attachable cutlery, kitchen tools, eating utensils, gardening tools, sports equipment (hunting, fishing, golf, and weightliftin

Orthocare Anatomical Cone Hand Orthosis (Models 1108 Thru 1113)

The Orthocare Anatomical Cone Hand Orthosis is a hand cone designed to provide supinated neutral positioning of hand, and to maintain slight finger flexion and metacarpal arch. The brace is made of lightweight plastic. 2 Velcro straps secure the orthosis to the hand. SIZES: Available for the left or right hand; Small (##1108, ##1109), Medium (##1110, ##1111), and Large (##1112, ##1113).

Orthocare Neutral Position Wrist Hand Orthosis (Models 1115 Thru 1128)

The Orthocare Neutral Position Wrist/Hand Orthosis is a spasticity- type splint with an anatomical cone design with premolded metacarpal arch that maintains slight flexion of all finger joints, and supported thumb in opposition. Due to the elimination of a radial border, the splint allows easy forearm pronation and supination. The recessed ulnar styloid area helps eliminate pressure. The brace is completely flanged and has rounded edges to insure against possible injury by the user. The custom o

Orthocare Positional Orthosis For Hand Burns

The Orthocare Positional Orthosis for Hand Burns is a functional hand splint designed to assist in preventing deformities of hands that have been burned. Made of Kydex plastic, this hand orthosis features 15 degrees of wrist dorsiflexion, thumb abduction and extension, approximately 60 degrees of flexion of metacarpophalangeal (MPC) joints, and full extension of interphalangeal (IP) joints. The Kydex plastic is easily adapted with a heat gun, and wipes clean with any aseptic solution. SIZES: Ava

Orthocare Wanchik Neutral Position Resting Wrist/hand Orthosis

The Orthocare Wanchik Neutral Position Resting Wrist/Hand Orthosis is a functional hand position splint designed to maintain the triangular position of the metacarpal heads in a resting position. The brace is sculptured to fit the thenar and hypothenar eminences of the hand, and maintains the metacarpal arch in the proper curve and angle in relation to the wrist joint. This orthosis is made of Kydex plastic, which is adaptable with a heat gun. An integral, adjustable Velcro strap system secures

Phoenix Extended Outrigger

The Phoenix Extended Outrigger is a hand orthosis designed for use with individuals with radial nerve injuries or other disabilities of the hand. When mounted to a thermoplastic splint base (not included), this unit positions the wrist and the metacarpophalangeal (MCP) joints in extension while allowing active functional hand use. The splint design ensures minimal coverage of the palmar surface of the hand, allowing increased sensation. The set includes a dorsal outrigger, four pre-tied finger s

Phoenix Outrigger

The Phoenix Outrigger is a hand orthosis designed for use with individuals with disabilities of the hand. This unit provides dynamic metacarpal phalangeal (MCP) extension with active flexion, allowing complete available range of motion. The outrigger bonds to any splint base (not included), and slotted pulleys can be aligned for a 90-degree angle of pull. The kit includes a curved dorsal extension outrigger, four slotted pulleys, radial outrigger, pre-tied finger slings, rubber band posts, and a

Qualcare Grip Splint (Model 0051410)

The QualCare Grip Splint is a hand orthosis designed for use by individuals with upper extremity disabilities. This splint positions the wrist in the neutral position with the fingers in a relaxed position midway between flexion and extension. Available for the right or left hand, this splint features an adjustable Kydex shell, two Ethafoam cylinders, hand covers,and Velcro straps. To apply, select the foam cylinder appropriate for the individual, slide the cylinder on the hand post and apply th

Qualcare Grip Splint Ii (Models 510328 & 510604) & Qualcare Grip Splint Ii Long (Models 51289 &51290)

The QualCare Grip Splint II is a hand orthosis designed for use by individuals with upper extremity disabilities. This splint features a Kydex platform that can be modified with a heat gun for custom correction that remains in position. The thumb is held in the functional position. A removable Plastazote foam pad to match contractures is included. The splint fits either the right or left hand and includes a removable, washable one-piece fabric cover laminated to foam cushioning. Model 510328 com

Rolyan Resting Pan Mitt Splint

The Rolyan AirThru Resting Pan Mitt Splint is a hand orthosis designed for use with individuals with arthritis or spasticity. Made of Rolyan AirThru (see separate entry) Aquaplast-T OptiPerf, this pre-formed and padded. Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Airthru Functional Position Pre-Cut Splint Blank

Rolyan AirThru Functional Position Pre-Cut Splint Blank is a hand orthosis designed for use with individuals with upper extremity disabilities. Made of Rolyan AirThru (see separate entry) Aquaplast-T OptiPerf, this static pan splint blank is pre-cut to size and ready for fitting. Padding is not included. Models are available for the right or left hand. SIZES: Extra-small, small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Airthru Functional Position Splint

The Rolyan AirThru Functional Position Splint is a hand orthosis designed for use with individuals with upper extremity disabilities. Made of Rolyan AirThru (see separate entry) Aquaplast-T OptiPerf, this static pan splint is pre-formed and padded. Models are available for the right or left hand and they can be modified as needed. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Anti-Spasticity Ball Splint (Models 550456 & 550457)

The Rolyan Anti-Spasticity Ball Splint, models 550456 and 550457 are hand orthoses designed to position the hand in a reflex-inhibiting position for persons with hand disabilities. This splints are made with a ball (not included) and features a corrugated finger design. Available in solid Ezeform (see also separate entry) material or solid Aquaplast-T (see also separate entry) material, the splints can be made with either a dorsal or volar arm piece. OPTIONS: Ball for forming splint and a tool f

Rolyan Anti-Spasticity Ball Splint With Locking Wrist Hinge (Models A4181 Thru A4188)

The Rolyan Anti-Spasticity Ball Splint with Locking Wrist Hinge, models A4181 thru A4188 are wrist and forearm splints and hand orthoses designed for use by individuals with neurological and upper extremity disabilities. Available for the right or left hand, the splint's metacarpal pads prevents the fingers and thumb from lifiting off the splint. Ridges separate the fingers. The wrist hinge locks the wrist in desired positioning. Positioning can be achieved or changed with an allen key. Prefor

Rolyan Anti-Spasticity Ball Splint With Slot & Loop Strapping (Models A419300 Thru A419307)

The Rolyan Anti-Spasticity Ball Splint with Slot & Loop Strappings, models A419300 thru A419307, are wrist and forearm splint and hand orthoses designed for use by individuals with neurological and upper extremity disabilities. Available for the right or left hand and designed for use with individuals with moderate to severe spasticity, the splint's metacarpal pads and slot-and-loop finger strappings prevent the fingers and thumb from lifiting off the splint. Ridges separate the fingers. Pr

Rolyan Aquaplast Functional Position Splint

The Rolyan Aquaplast Functional Position Splint is a hand orthosis designed for use by individuals with upper extremity disabilities. Made of Rolyan Aquaplast (see separate entry), this splint is pre-formed. Models are available for the right or left hand and they can be repeatedly heated and reshaped. Straps are not included. SIZES: Small, medium, or large. COLOR: This splint is transparent while soft and white when hard. DIMENSIONS: 1/8-inch thick.

Rolyan Aquaplast Resting Pan Mitt Splint (Models A763001- A763006)

The Rolyan Aquaplast Resting Pan Mitt Splint, models A763001 thru A763006 are wrist and forearm splints designed for use by individuals with arthritis or other wrist and hand disabilities who require support for the joints of the thumb. Made of Aquaplast material (see also separate entry), these splints are pre-formed and can be heated and re-shaped as needed. Straps are not included. Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick. COL

Rolyan Burn Splint (Models A7651 To A7656)

The Rolyan Burn Splint, models A7651 to A7656, are wrist and forearm splints designed to help position the hand for persons with burn injuries, tendon transfer, or hand trauma. The splints are designed for users who require 20 to 30 degrees of wrist extension, 60 to 70 degrees of metacarpal phalangeal (MCP) flexion, and the thumb positioned at a 45 degree extension midway between radial abduction and palmar abduction. The splints are designed to accommodate thick bandage dressing and is fabrica

Rolyan Carve-It Upper Extremity Positioning Splint (Model A812606)

The Rolyan Carve-It Upper Extremity Positioning Splint, model A812606, is an elbow support and hand orthosis designed for use with individuals with mild to severe upper extremity flexor spasticity. Available for the right or left hand, the Elbow Positioning Splint is made of fire-retardant open-cell foam and can be modified with an electric knife. The splint offers two options for hand support: A wedge hand positioner for use with a separate hand splint or a soft and functional hand positioning

Rolyan Deluxe Spasticity Hand Splint (Models A4841 To A4846)

The Rolyan Deluxe Spasticity Hand Splint is a wrist and forearm splint and hand orthosis designed for use with individuals with neurological and upper extremity disabilities. Available for the right or left hand, the splint is fabricated of Polyflex II material (see entry) and features a forearm trough to provide support and maintain the wrist in a neutral position. A built-in rigid hand cone provides inhibition to long finger flexors and maintains the thumb web space. The splint can be adjusted

Rolyan Dorsal Anti-Spasticity Ball Splint

The Rolyan Dorsal Anti-Spasticity Ball Splint is a wrist and forearm splint and hand orthosis designed for use with individuals with neurological and upper extremity disabilities. Available for the right or left hand, the splint's metacarpal pad helps keep the fingers and thumb from lifiting off the splint. Ridges separate the fingers. Preformed of Polyform splinting material (see entry), the splints position the wrist, abduct rhe fingers and thumb and maintain the palmar arch in a reflex-inhib

Rolyan Flexor Tendon Repair Kit

The Rolyan Flexor Tendon Repair Kit is a hand orthosis designed for use byindividuals with hand and wrist disabilities. Designed for use following tendon repair, the kit includes a pre-cut dorsal blocking splint blank, line guides with attachment pieces, fingernail hooks, elastic thread for dynamic traction, and straps. One strap includes a strap pad and has four eyelets for securing the elastic thread. The splint blank is available in a choice of Polyflex II or Aquaplast-T material (see also se

Rolyan Functional Position Hand Splint

The Rolyan Functional Hand Position Splint is a hand orthosis designed for use with individuals with upper extremity disabilities. Made of Polyform (see separate entry), this splint is pre-formed. Models are available for the right or left hand. Straps are not included. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Functional Position Hand Splint With Strapping

The Rolyan Functional Position Hand Splint with Strapping is a hand orthosis designed for use with individuals with upper extremity disabilities. Made of Polyform or Polyform Light (see separate entry), this pre-formed splint features three wide straps to secure the splint to the arm and hand . Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: The Polyform model is 1/8-inch thick and the Polydorm Light model is 1/16-inch thick. COLOR: The Polyform mode

Rolyan Functional Position Splint With Slot And Loop Strapping (Models A419300-A419307)

The Rolyan Functional Position Splints with Slot and Loop Strappings, models A419300 thru A419307 are hand orthoses designed for use by individuals with upper extremity disabilities. Made of Polyform (see separate entry), these pre-formed splints feature straps laced through the pan (hand) area to maintain proper finger positioning . Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Gel Shell Splint

The Rolyan Gel Shell Splint is a hand orthosis aid designed for use by individuals with hand injuries. Designed to allow healing for injured hands, features include a Gel Shell pad designed to help disperse the energy from external pressure and to provide pressure on the incision site of the carpal tunnel, desensitizing and preventing hypertrophic scar formation. This fabric splint is machine washable and the Gel pad is hand washable. The splint is designed for both right- and left-handed use. D

Rolyan Hand-Based Anti-Spasticity Ball Splint

The Rolyan Hand-Based Anti-Spasticity Ball Splint is a wrist and forearm splint and hand orthosis designed for use with individuals with neurological and upper extremity disabilities. Available for the right or left hand, the splint's metacarpal pad helps keep the fingers and thumb from lifiting off the splint. Ridges separate the fingers. Preformed of Polyform splinting material (see entry), this splint ends at the hand and positions the wrist, abducts the fingers and thumb and maintain the pa

Rolyan In-Line Splint (Models A679001 To A679008

The Rolyan In-Line Splint, models A679-001 to A679-008, is a wrist splint designed to provide volar, ulnar and radial support for individuals with arthritis. Featuring a circumferential design and neoprene fabric to warm inflammed joints, this splint is designed with a thin strapping system engineered to provide a gentle radial pull to align the digits. It also features a set of Aquaplast ulnar and volar stays constructed to maintain wrist alignment; these stays can be molded for an individual f

Rolyan Kwik-Form Economy Functional Resting Splint

The Rolyan Kwik-Form Economy Functional Resting Splint is a wrist and forearm splint designed for use with individuals with neurological or severe physical disabilities or upper extremity disabilities. This pre-formed splint is ready to use and is available for the right or left hand. The splint has a wire core that can be bent to the desired position to support the hand, fingers, and wrist in a functional or resting position. This soft foam splint has hook-responsive material laminated to the s

Rolyan Kwik-Form Economy Progressive Hand Splint

The Rolyan Kwik-Form Economy Progressive Hand Splint is a wrist and forearm splint designed for use with individuals with neurological or severe physical disabilities or upper extremity disabilities. This pre-formed splint is ready to use and can be used on the right or left hand. The splint has a wire core that can be bent to the desired position to support the hand and wrist and provide progressive extension of the fingers. The splint includes three hand rolls to accommodate progress and a cov

Rolyan Kwik-Form Functional Resting Splint

The Rolyan Kwik-Form Functional Resting Splint is a wrist and forearm splint designed for use with individuals with neurological or severe physical disabilities or upper extremity disabilities. This pre-formed splint is ready to use is available for the right or left hand. The splint has a wire core that can be bent to the desired position to support the hand, fingers, and wrist in a functional or resting position. Standard features include straps with hook-and-loop closures and a removable mach

Rolyan Kwik-Form Progressive Hand Splint

The Rolyan Kwik-Form Progressive Hand Splint is a wrist and forearm splint designed for use with individuals with neurological, severe physical disabilities or upper extremity disabilities. This pre-formed splint is ready to use and can be used on the right or left hand. The splint has a wire core that can be bent to the desired position to support the hand and wrist and provide progressive extension of the fingers. The splint includes three hand rolls. It features straps with hook-and-loop clos

Rolyan Neutral Position Hand Splint

The Rolyan Neutral Position Hand Splint is a hand orthosis designed to hold the hand and wrist in a neutral position for individuals with spasticity. Pre-formed of Polyform material (see also separate entry), this orthosis includes three self-adhesive straps (forearm, wrist, and hand). Adjustments can be made as needed and models are available for the right or left hand. SIZES: Small, medium, and large.

Rolyan Palm Protector

The Rolyan Palm Protector is a hand orthosis designed for use with individuals with neurological disabilities and severe physical disabilities and disabilities of the hand. Available for the right or left hand, the Protector is made of closed-cell foam lined with sherpa fabric. This unit does not have finger separators and an adjustable hook-and-loop strap secures the protector. SIZES: One size fits most.

Rolyan Palm Protector With Finger Separators

The Rolyan Palm Protector with Finger Separators is a hand orthosis designed for use with individuals with neurological disabilities and severe physical disabilities and disabilities of the hand. Available for the right or left hand, the Protector is made of closed-cell foam lined with sherpa fabric. The finger separators help prevent contractures and abduct the fingers to decrease tone and reduce potential skin breakdown between the fingers. The unit also helps prevent skin breakdown in the pal

Rolyan Palm Shield

The Rolyan Palm Shield is a hand orthosis designed for use by individuals with neurological disabilities and severe physical disabilities and disabilities of the hand. Available for the right or left hand, the Shield is customizable and finger separators help prevent skin breakdown between the fingers. A large thumb piece provides optimal thumb positioning. Used for moderate to severe hand tightness, the device helps prevent finger contractures and skin breakdown in the palm. SIZES: One size fit

Rolyan Perforated Functional Position Hand Splint With Strapping

The Rolyan Perforated Functional Position Hand Splint with Strapping is a hand orthosis designed for use by individuals with upper extremity disabilities. Made of Polyform (see separate entry), this pre-formed splint features three wide straps to secure the splint to the arm and hand and perforations over the surface for maximum ventilation. Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Perforated Functional Position Splint

The Rolyan Perforated Functional Position Pre-Cut Splint Blank is a wrist and forearm splint designed for use by individuals with wrist and hand disabilities. Available in perforated Ezeform or Aquaplast-T material (see also separate entries), these splint blanks are pre-cut to size and ready for fitting. These splints are perforated for maximum air flow and the perforations are patterned so rigidity is not compromised. The form can be inverted for right- or left-handed use. SIZES: Small, medium

Rolyan Pre-Formed Anti-Spasticity Ball Splint (Volar)

The Rolyan Pre-formed Anti-Spasticity Ball Splint (Volar) is a wrist and forearm splint and hand orthosis designed for use with individuals with neurological and upper extremity disabilities. Available for the right or left hand, the splint's metacarpal pad prevents the fingers and thumb from lifiting off the splint. Ridges separate the fingers. Preformed of Polyform splinting material (see entry), the splints position the wrist, abduct rhe fingers and thumb and maintain the palmar arch in a re

Rolyan Preformed Resting Pan Mitt Splint

The Rolyan Preformed Resting Pan Mitt Splint is a wrist and forearm splint designed for use by individuals with arthritis or other wrist and hand disabilities who require support for the joints of the thumb. Made of Polyform material (see also separate entry), this splint is pre-formed and shaped. Straps are not included. Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick.

Rolyan Preformed Resting Pan Mitt Splint With Strapping

The Rolyan Preformed Resting Pan Mitt Splint with Straps is a wrist and forearm splint designed for use by individuals with arthritis or other wrist and hand disabilities who require support for the joints of the thumb. Made of Polyform material (see also separate entry), this splint is pre-formed and shaped and includes three self-adhesive straps. Models are available for the right or left hand. SIZES: Small, medium, or large. DIMENSIONS: 1/8-inch thick. COLOR: White or beige.

Rolyan Progressive Palm Protector Splint With Pre-Cut Splint Blank

The Rolyan Progressive Palm Protector with Pre-Cut Splint Blank is a hand orthosis and wrist and forearm splint designed for use by individuals with neurological disabilities and severe physical disabilities and disabilities of the hand. Available for the right or left hand, the kit includes a Rolyan Progressive Palm Protector Splint (see entry) and a pre-cut wrist and forearm splint blank. The blank is formed to the individual's hand and wrist for a customized splint and slipped into the stay

Rolyan Progressive Palm Protector Splints & Rolyan Progressive Palm Protector Splints With Wrist Support

The Rolyan Progressive Palm Protector Splints are hand orthoses designed to provide correct and comfortable hand positioning for persons with neurological disabilities or arthritis. Featuring a removable palm piece, the splint base is designed to accommodate all hand sizes and can be trimmed if necessary to fit a smaller hand. This soft splint also has an adjustable strapping system that allows the user to either strap the thumb only, the fingers only, or both the fingers and thumb. The splint i

Rolyan Resting Pan Mitt Pre-Cut Splint Blank

The Rolyan Resting Pan Mitt Pre-Cut Splint Blank is a wrist and forearm splint designed for use with individuals with arthritis or other wrist and hand disabilities who require support for the joints of the thumb. Available in solid Polyflex II, Ezeform, Synergy, or San-Splint material (see also separate entries), these splint blanks are pre-cut to size and ready for fitting. These splints can also be used volarly or dorsally to splint hypertonic hands. Models are available for the right or left

Rolyan Sof-Gel Palm Shield

The Rolyan Sof-Gel Palm Shield is a hand orthosis designed for use with individuals with neurological disabilities and severe physical disabilities and disabilities of the hand. The gel in the finger separators and the palm will not bottom out and prevents skin breakdown in the palm and between the fingers. Used for moderate to severe hand tightness, the unit helps prevent contractures and the large thumb piece provides gel for comfort and positioning. An adjustable hook-and-loop strap secures t

Rolyan Tap (Tone And Positioning Splint) Splint

The Rolyan TAP (Tone and Positioning Splint) Splint is a wrist and forearm splint and hand orthosis for people with wrist or forearm disabilities or spasticity. Designed as a neoprene glove with a long arm strap, the splint is designed to decrease hypertonicity and is intended for neurological and orthopedic indications. Available for the right or left hand, this splint provides constant low-level stretch in pronation or supination while the glove holds the thumb in abduction and leaves the inde

Rolyan Walker Splint (Models A7671 To A7674)

The Rolyan Walker Splint, models A7671 to A7674, are splints designed to help individuals with arthritis and neurological disabilities to securely grasp a walker handle. It features wrist straps for stability and is made from Polyform splinting material with a Kushionflex pad. The splints can be specifically adapted to each user by using a heat gun or hot water. Available for right- or left-handed use. DIMENSIONS: Determined by width of 2nd to 5th metacarpal phalangeals (MCPs). Small/Medium is 3

Smartglove Pm

The Smart Glove PM is a wrist support designed for use by individuals with carpal tunnel syndrome, upper extremity disabilities, arthritis, tendonitis, or other wrist and hand pain. Designed for use as a nighttime splint, this orthosis prevents the hand from being held in a harmful position while sleeping. It is latex free and washable. The cotton lining and cushioning foam protects the skin from dryness. Velcro straps provide adjustable fit. The splint is reversible to fit the left or right ha

Theratogs Ultra Wrist And Thumb Positioning System (Models Gwt307R, Gwt307L, Gwt317R, Gwt317L, Gwt617R, Gwt617L, Gwt627R, Gwt627L, Gwt637R & Gwt637L)

The TheraTogs ULTRA Wrist and Thumb Positioning System, models GWT307R, GWT307L, GWT317R, GWT317L, GWT617R, GWT617L, GWT627R, GWT627L, GWT637R and GWT637L, is a hand and wrist orthosis for children and adults with upper extremity disabilities. The system can be used to improve wrist and thumb stability, restore the palmar arch, reduce flexible ulnar deviation, assist in reducing forearm pronation or supination, and relieve pain associated with malalignment. It is made with GoldTone material with

Thermoskin Carpal Tunnel Wrist/hand Brace (Models 8*242 & 8*243)

The Thermoskin Carpal Tunnel Wrist/Hand Brace, models 8*242 and 8*243, is a hand, wrist, and forearm orthosis designed for use by individuals with carpal tunnel syndrome and other repetetive motion disabilities or upper extemity disabilities. The Thermoskin material combines gentle compression to counteract tissue swelling with support and naturally-generated body heat. Thermoskin has Trioxon, a material that captures and retains natural body heat, increasing subcutaneous skin temperature by two

Urias Pressure Splints (3823 Series)

Urias Pediatric Pressure Splints, 3823 Series, are inflatable hand and ankle foot orthoses and wrist and forearm splints designed for therapy and proper limb positioning for infants, children, and adolescents with upper or lower extremity disabilities, neurological disabilities, or cerebral paley. Designed to inhibit spasticity, assist movement patterns, expedite weight bearing and reduce edema, each splint consists of a double layer of washable PVC sheeting and features a plastic zipper closure

Urias Pressure Splints (Model 3821 Series & Model 3823L)

Urias Pressure Splints, model 3821 Series, and model 3823L, are inflatable hand and ankle foot orthoses and wrist and forearm splints designed for therapy and proper limb positioning for use by adults with upper or lower extremity disabilities, neurological disabilities, or cerebral palsy. Designed to inhibit spasticity, assist movement patterns, expedite weight bearing and reduce edema, each splint consists of a double layer of washable PVC sheeting and features a plastic zipper closure for eas

Wrist Brace (Model 230)

Wrist Brace, model 230, is a wrist splint that provides comfort to those with wrist disabilities. The brace retains body heat while adding support and compression. Easy to apply, it encompasses the base of the thumb and wrist joint with 1/8th inch neoprene. Hook and loop fasteners make the brace size and compression adjustable. It can be used for either the right or left hand. SIZE: One size fits all.

Wrist Hand Colles Splint

The Wrist Hand Colles Splint is designed to provide temporary immobilization and positioning of the wrist in the radial deviated position. Available for the right or left arm, the rigid polystyrene splint can be gas autoclaved and allows for radiographic examination. SIZES: Small, medium, large, and extra large. DIMENSIONS: The small splint is 5.25 inches long, the medium is 7.5 inches long, the large is 9 inches long, and the extra large is 10 inches long. COLOR: White.

Wrist Hand Forearm Splint

The Wrist Hand Forearm Splint is designed to provide temporary immobilization of the wrist in the neutral position. Available for the right or left arm, the rigid polystyrene splint can be gas autoclaved and allows for radiographic examination. SIZES: Small, medium, and large. DIMENSIONS: The small splint is 7.5 inches long, the medium is 10 inches long, and the large is 10.5 inches long. COLOR: White.

Wrist Hand Orthosis & Wrist Hand Orthosis Extended

The Wrist Hand Orthosis is designed to provide support and immobilization of the wrist while allowing unobstructed motion of the thumb and fingers. Made of radiolucent, lightweight, foam-lined polyethylene plastic, this splint features adjustment straps and a padded dorsal tongue. Two presewn cotton stockinettes are included with each splint. The Extended model has a four-inch proximal extension for added protection. Both splints are available for the right or left hand. SIZES: Small, medium, an

Wrist Hand Thumb Orthosis & Wrist Hand Thumb Orthosis Extended

The Wrist Hand Thumb Orthosis is designed to immobilize the hand and thumb while allowing unobstructed motion of the fingers. Available in models for the right and left hand, the splint is made of radiolucent, foam-lined, perforated polyethylene plastic and provides rigid cast-like protection. Standard features include a padded dorsal tongue and three adjustment straps. Two presewn stockinettes are included. The Extended model has four inches of proximal extension for added protection. SIZES: Sm

Parent Category: Static Function
 
Processing...


Driving Walking/Biking Public Transit  Get Directions