Bath Seat

Results: 72

Abbey Bathseat

The Abbey Bathseat is a bath seat designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. It is made from reinforced plastic with 7 millimeter slots for drainage and a semicircular indentation in the front of the seat to facilitate intimate hygiene. The seat has four suction cups to hold it securely in position in the tub. COLOR: White. DIMENSIONS (LxW): 460 x 360 millimeters (mm). The height is adjustable to 150, 200, 250 and 300 mm or 150 and 250

Ableware 704092005 Sit and Ride Ambulatory Aid

Assists developmentally delayed children and adults who are experiencing ambulatory difficulties. Can be used as a stepping stone in therapy. Practice in the seated position of certain ambulatory patterns will prepare a person for actual use of the movements in a standing position. The sling allows children and adults of all sizes to sit and propel themselves with their feet and to practice smooth reciprocal leg movements, heel strikes, and coordinated knee flexion and extension. Can also be use

Adjustable Bath And Shower Seat

The Adjustable Bath and Shower Seat is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat can be used in most bathtubs and shower stalls. The unit's seat and the back are plastic with easy-to-grip handles and molded-in areas for hand-held shower spray storage. The aluminum legs are flared to help prevent tipping and have slip-resistant rubber tips. DIMENSIONS (HxDxW): 15.5 x 16.5 x 18 inches without back; 18 x 16.5 x

Adjustable Bath Benches (Models 9010 & 9020)

The Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance, or cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a molded back, the bench has a plastic seat and back with multiple drainage holes and is equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches high x 11x 19 inches. CAPACITY: Weight capacity is 300 pounds.

Adjustable Bath Chair (Models B0732, B0740 & B0848)

The Adjustable Bath Chair, models B0732, B0740, and B0848, is a reclining bath seat designed to provide children with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. This chair has a frame constructed of PVC tubing and a mesh seat. The top and bottom rails of the frame are padded. The angles of back and leg rests of this bath chair are adjustable, and the chair includes chest and leg safety straps. The mesh is removable for cleaning. OPTIO

Adjustable Composite Bath & Shower Seat

The Adjustable Composite Bath and Shower Seat is a shower chair/bath seat designed for use by individuals with mobility and balance disabilities. This seat has large, easy-to-grip handles and molded-in storage areas for a hand-held shower spray. The seat is designed for individuals requiring a larger seating area and has S- shaped drainage holes to eliminate graywater pooling. DIMENSIONS (HxDxW): 18.5 x 20 x 25.5 inches. The height adjusts from 18.5 to 23.5 inches in unlimited increments. CAPAC

Aquarian Bath Seat (Model Aqb6)

The Aquarian Six Slat Bath Seat, model AQB6, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities. Designed to be used in conjunction with the Aquarian Four Slat Bathboard (see separate entry), this seat is made from a durable extruded plastic tube and strengthened with internal plywood slats to accommodate a person requiring a larger seat area. The seat has an H-shaped frame on the underside. DIMENSIONS: The seat size (LxW) is 460 x 280 millimet

Aquarian Four Slat Bathboard (Model Aq48)

The Aquarian Four Slat Bathboard, model AQ48, is a bath seat designed for use by individuals with lower extremity, balance, or mobility disabilities or arthritis. This four-slat seat is made from a durable extruded plastic tube and strengthened with internal plywood slats, offering added support for the user. This seat has easy-to-fit cleats on the underside. DIMENSIONS: 26, 27, or 28 inches long; all seats are 230 millimeters wide. CAPACITY: 159 kilograms (25 stones).

Aquarian Six Slat Showerboard (Model Aq65B))

The Aquarian Six Slat Showerboard, model AQ65B, is a shower seat designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. Made of extruded plastic tube strengthened with internal plywood slats, this bathboard is designed for users requiring a larger seat area. The seat’s underside is equipped with easy to fit cleats. DIMENSIONS: 26 inches, 27 inches, or 28 inches. All models are 14 inches wide. CAPACITY: 159 kilograms (25 stones).

Bath And Shower Seat

The Bath and Shower Seat is a bath seat designed for use by individuals with spinal cord injury or mobility or balance disabilities. Available with or without a back rest, the seat has a heavy-gauge aluminum frame with height-adjustable legs with non-skid rubber tips and a molded, textured polyethylene seat with drainage holes. The backrest is made of the same material as the seat. Both the backrest and seat have a handhold slot to aid in transfers. The seat has a wide base for added stability.

Bath Bench Without Back & Heavy Duty Bath Bench

The Bath Bench without Back and the Heavy Duty Bath Bench are shower benches designed for use by individuals with mobility disabilities. Both models are height-adjustable and have molded, composite contoured seats with a textured finish and hand holds, and aluminum frames with suction feet. The Heavy Duty Bath Bench also has a molded, contoured back with a textured finish and drainage holes. DIMENSIONS: The height adjusts on both models from 14 to 18 inches. CAPACITY: The backless bench has a 30

Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with multiple disabilities, including cerebral palsy and lung disease while bathing. This "Fogarty" style seat has a molded plastic seat mounted in a frame made of plastic pipe. It is equipped with a pelvic belt and a T-bar to hold the child in place. TITLE: All in the Family. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES: 12-14. Number of pages: 4 (including cover).

Bath Seat (Model 1880A)

The Bath Seat, model 1880A, is a bathtub seat designed for use by individuals with balance or mobility disabilities. This tip-up bath seat has teakwood slats on a brass frame. Installed on the bathtub wall, it can be folded up to the wall when not in use. The seat comes with mounting brackets and screws. DIMENSIONS (DxW): Seat is 12.75 x 18.75 inches. When up, the seat projection is 2.5 inches. CAPACITY: 400 pounds. COLOR: The frame is available with a with a stainless steel, chrome, polished n

Bath Seat Farnham With Moulded Plastic Seat (Model 09-107-3113)

The Farnham Bath Seat with Moulded Plastic Seat, model 09-107-3113, is a bath seat designed for use by individuals with balance or mobility disabilities. This seat hangs from the rim of the bath and wedges firmly into the sides as the bather sits on it. The strong contoured seat is mounted on a steel frame with hinged sides. The seat is adjustable in width for different sizes of bathtub. The tips of the frame are covered in soft end caps to protect the bath and improve grip. OPTIONS: Padded viny

Bath Tub Seat With Suction Cups (Model 80)

The Bath Tub Seat with Suction Cups, model 80, is a bath seat designed for use in the bathtub or shower. The frame is made of furniture-grade tubular PVC plastic with a vinyl-coated polyester mesh seat. The legs have suction cups for attaching to the floor of the tub. DIMENSIONS (HxLxW): 17 x 18 x 17 inches. WEIGHT: 10 pounds. COLOR: White frame. The mesh fabric is available in a variety of colors.

Bathroom Step Block

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted step block for an individual with cerebral palsy and developmental delays to use when using a bath seat. Caregivers had purchased a sliding bath seat which had adjustable legs, but the adjustment was not enough to cover the full 150 millimeter difference between the bath and the bathroom floor. It was originally suggested to extend the outside legs of the seat so they reached the floor. However, the seat was quite high and

Bathseat (Model 1720 & 1720D)

The Bathseat is a bath seat designed for use by bariatric individuals with lower extremity, mobility, or balance disabilities. Designed for use in standard bathtubs, this seat has an anodized aluminum tubular frame, double tubed for strength and a commode-style seat. A silicone seal prevents mildew and rust and vinyl cushions prevent marring of the tub. OPTIONS: Floor stand for use in shower. DIMENSIONS (WxDxH): 15.25 x 20 x 18.5 inches. The tub must be 22 inches wide at the center. CAPACITY: 8

Bathtub Transfer Benches (Models A830-32, A830-3, A830-30, & A830-31)

The Bathtub Transfer Benches are bath seats designed for use by individuals with spinal cord injury, mobility disabilities, or balance disabilities. All models have heavy-gauge aluminum frames with height-adjustable legs with rubber tips and an aluminum armrest/side rail. All models also have contoured back rests which can be attached on the right or left side. Model A830-32 has a waterproof padded vinyl seat; model A830-3 has a molded-plastic, slip-resistant seat with drainage holes; model A830

Benebath Shower & Bath Bench

The BeneBath Shower and Bath Bench is a bath and shower bench designed for use by individuals with mobility or balance disabilities. This lightweight bench has an anodized aluminum frame with a molded plastic seat, and features contoured removable seat pads; separately height-adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat. The bench can be disassembled for storage or transport in a zippered carrying bag (included)

Benebath Shower & Bath Chair

The BeneBath Shower and Bath Chair is a bath seat and shower chair designed for use by individuals with mobility or balance disabilities. This lightweight chair has an anodized aluminum frame with a molded plastic seat and back. Features include contoured seat and back pads; separately height adjustable legs; large, flared, non-skid, contoured feet; pin locks for securing adjustable parts; and molded handles in the seat and back. The chair back is positioned at a slight angle for comfort. The pa

Blue Wave Bathing System (Models E451, E452 & E453)

The Blue Wave Bathing System, models E451, E452 and E453, is a child's bath seat designed for use with children with physical disabilities. This chair supports the child in a sitting or reclining position at a height convenient for bathing with no obstructions for the caregiver. The unit consists of a detachable, adjustable seat and a stand to raise the seat further above the tub floor. The seat features two types of upholstery a soft, sturdy polyester knit or the standard vinyl-covered polyeste

Columbia Reclining Bath Chair (Models 8500, 8600, & 8700)

The Columbia Reclining Bath Chair is a bath seat for children and adults designed to tilt to several angles from nearly upright to reclining. The seat includes a pelvic safety belt and torso alignment belt, both with buckle. The mesh seat is fungus- and bacteria-resistant. OPTIONS: Extension legs, casters, and a head pad are available for all models. DIMENSIONS (LxW): Model 8500 is 28 x 17 inches and accommodates children up to 40 inches tall; model 8600 is 32 x 17 inches and accommodates child

Columbia Wrap-Around Bath Support (Models 7200, 7300, & 7700)

The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainle

Comfort Bather Bath Lift (Model Mau-200140)

The Comfort Bather Bath Lift, model MAU-200140, is a bath lift designed for use by individuals with balance, mobility, or lower extremity disabilities. This motorized portable bath lift features an inflatable seat and back support, air pump, and a waterproof floating hand control. The user can raise and lower the lift using the hand control, and the unit is lowered to the bottom of the tub for bathing and raised to the top of the tub for exiting. A safety feature prevents lowering of the lift un

Comfort Shower Chair

The Comfort Shower Chair is a shower stool designed for use by individuals with mobility disabilities. This chair has a tubular frame and armrests, a padded backrest, and a padded commode-style seat. DIMENSIONS: The seat is 14 inches wide and the base is 22.5 x 20 inches. CAPACITY: 335 pounds.

Corner Seat

The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches

Custom Bath Seat

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bath seat for an individual with multiple sclerosis. After falling in the shower, this individual determined she needed some way of stabilizing herself when using her over-bath shower. Various devices suggested by her physical therapist provided to be unsuitable for the older-style bath that has a narrow lip on the wall side. A customized bath seat, which the individual could transfer on and off independently and was remova

Deluxe Adjustable Bath Bench With Red Safety Handle (Models 9100 & 9120)

The Deluxe Adjustable Bath Bench With Red Handle is a bath seat designed for use by individuals with mobility, balance, and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a contoured back which slides into seat, the bench has a hard plastic seat and back with multiple drainage holes. The safety handle provides support and balance assistance when entering and exiting the tub. The handle can be attached to eaither side and additional handles can b

DIY Bath Chair

DIY Bath Chair is designed for use by children with limited mobility and postural control during bathing activities. This chair supports the child in a sitting or reclining position.

Dolphin Bath Seat (Model Do 2000)

The Dolphin Bath Seat, model DO 2000, is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs and has a folding aluminum frame upholstered with quick-drying mesh fabric. The chair is length adjustable and the seat and back adjust independently, with the back support offering 10 angle positions, including trendelenberg. The seat is depth-adjustable and offers five tilt positio

Etac Bath Chair

The Etac Bath Chair is a bath seat designed for use by individuals with mobility or lower extremity disabilities or arthritis. Designed to fit most standard bathtubs, this chair-style seat has a steel tube frame with an epoxy polyester lacquered finish and an ergonoimically designed seat and an injection-molded plastic adjustable backrest. The chair is avaiable with a solid seat or a recessed seat for hygiene access; both seat styles are embossed with a safety pattern to prevent slipping. DIMENS

Flamingo, The

The Flamingo is a child's bath and toilet seat designed for use by children with severe physical disabilities or mobility disabilities. Available in three sizes and designed for children from two to thirteen years of age, the unit consists of a height-adjustable wheeled frame and a removable, multi-use padded seat covered in waterproof upholstery. When removed from the frame, the seat can be used as a toilet seat or bath seat, Removable lateral sections provide additional support if needed. The

Folding Shower Chair With Back

The Folding Shower Chair with Back is a shower stool designed for use by individuals with mobility disabilities. This molded chair has a wide contoured seat and folding back with drainage holes, molded hand-held shower holders, a folding aluminum frame, and non-marring rubber tips. DIMENSIONS (HxWxD): The seat is 17.5 x 19.75 x 17 inches. The back height is 12 inches high from the seat. Folded, the unit is 25.5 inches long x 19.75 inches wide x 7.5 inches deep. CAPACITY: 250 pounds. WEIGHT: 6.5

Folding Tub Seat

The Folding Tub Seat is a folding bathtub seat designed for use by individuals with balance or lower extremity disabilities. The seat has three horizontal slats with a textured non-slip surface. DIMENSIONS: 26 or 28 inches long. COLOR: Solid finishes include white, almond, biscuit, or gray; granite finishes include white granite, gray granite, or beige granite; metalic finishes include pewter or pearl; marble finishes include silver, white almond, or white travertine.

Franklin Brass Tub & Shower Seat (Model Fb595)

The Franklin Brass Tub & Shower Seat, model FB595, is a portable bath seat and shower bench designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. Fitting standard tubs and showers, this unit has a molded plastic seat on a tube frame with non-slip rubber feet. DIMENSIONS (DxWxH): Seat area is 12 x 20 x 16 inches. The leg tip spacing is 14 inches deep x 18.62 inches wide. The tube diameter is 1 inch. CAPACITY: 250 pounds. COLOR: White.

Go-Anywhere Commode, Shower N Tub Chair

The Go-Anywhere Commode, Shower N Tub Chair is a commode, shower chair and bath seat designed for use by individuals with lower extremity or mobility disabilities. This commode chair is designed to accommodate individuals with disabilities during travel or in the home. It consists of two sections, one used for transporting from bed to toilet and into a roll-in shower. The rolling section may be connected to the fixed section of the chair which may be set up in most right- or left-hand bathtubs,

Guardian Adjustable-Height Tub Transfer Seat

The Guardian Adjustable-Height Tub Transfer Seat ia a transfer bench designed for use by persons with physical disabilities who use wheelchairs. The bench allows individuals to slide from a wheelchair into the tub. This bench features a rust-resistant anodized aluminum frame, aluminum side and backrest handles to aid transfers, suction feet, and a vinyl-covered padded seat and backrest. DIMENSIONS: The seat height adjusts from 16 to 21 inches. The seat measures 28 inches wide x 18 inches deep.

Health Circle Tub Seat

The Health Circle Tub Seat is a bath seat designed for use by individuals with lower extremity, mobility, or balance disabilities. The unit attaches to most metal or fiberglass tubs with two secure padded clamp plates with non-marring grip surfaces. This seat swivels to enable transfers from outside the tub and locks into position automatically. Swivel is controlled by a large press-to-release seat lock and swivel control. The seat is equipped with a side handle to help with standing that can be

Heavy Duty Bath Seat With Perineal Cutout (Model Cq-1720D)

Heavy Duty Bath Seat with Perineal Cutout, model CQ-1720D, is a bariatric bath seat designed for use by individuals with mobility disabilities. This bath seat has a perineal cutout and fits the contour of a standard bathtub. The frame tubing has vinyl grips to prevent marring the tub. OPTIONS: Floor stand (model 1721) for use in a shower stall. DIMENSIONS (DxW): The seat is 15.25 x 20 inches. The tub must be at least 22 inches wide, measured inside the tub. CAPACITY: 650 pounds.

Heavy Duty Tub Transfer Bench (Models Cq-1730Fl & Cq-1730Fr)

The Heavy Duty Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This seat fits standard bathtubs at least 22 inches wide at the center inside the tub. The seat is made using "tube in a tube" construction for added strength. Vinyl grips on the tubing prevent marring the tub. A short back discourages reclining and is also removable. The seat is available with wall to right (model CQ-1730FR) or wall to left (model CQ-1730FL) config

Heavy-Duty Tub Bench With Commode Cutout (Model Ig-9670C)

The Heavy Duty Tub Bench with Commode Cut Out, model IG-9670C, is a bath seat and shower commode designed for use by individuals with mobility disabilities. It features a textured, non-slip seat with commode cut-out, handles, hand-held shower holders, and a shower curtain opening molded into bench. An ergonomically- shaped reversible backrest accommodates right- or left-side transfers. The seat has Microban protection which inhibits the growth of odor- and stain-causing bacteria, mold, and milde

Homecraft Ascot Bath System

The Ascot Bath System is a combination bathboard and bath seat designed for use by individuals with spinal cor injury or mobility or balance disabilities. This unit features a padded bathboard attached to the top of the bac rest of a padded bath seat that sits on the floor of the bathtub. The seat, back, and bathboard are padded with flame-retardant foam. The seat has an epoxy-coated frame that adjusts with clamping screws for variations in bathtub depth. The seat has a cut-out for improved pers

Hygienic Adjustable Bath Benches (Models 9050 & 9060)

The Hygienic Adjustable Bath Benches are bath seats designed for use by individuals with mobility, balance,and cognitive disabilities who have difficulty standing in a tub or shower. Available with or without a backrest, the benches have a horseshoe design for hygiene purposes. The hard plastic seat and back have multiple drainage holes and the legs are equipped with non-skid rubber tips. DIMENSIONS (HxDxW): Seat adjusts from 14 to 20 inches x 12 inches x 16 inches. CAPACITY: Weight capacity is

Hygienic Bathtub Seat With Back (Model 9403)

The Bathtub Seat with Back, model 9403, is a bath seat designed for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty sitting in the bathtub. The seat has arms with rubber tips which extend from the seat to the sides of the bathtub to support the chair in the tub. The seat has a horseshoe design for hygiene purposes. DIMENSIONS: The seat is 16 x 16 inches. The overall width is 28 inches. CAPACITY: The weight capacity is 250 pounds.

Kiwi Bath Chair

The Kiwi Bath Chair is a bath seat designed for use with children with mobility disabilities. This unit features a hand-operated mechanism to raise and lower the seat for positioning during bathing and transfers. A lever enables the unit be secured in the tub without permanent fixtures and it can be removed as needed. The unit features a mesh seat with positioning straps. DIMENSIONS: The unit fits children measuring 27 inches from the bottom of the buttocks to the mid-ear. When removed from the

Leckey Advance Bath Chair

The Leckey Advance Bath Chair is a child bath seat designed for use by children with mobility and neurological disabilities. This chair supports the child in a sitting or reclining position at a height convenient for bathing with no obstructions for the caregiver. The seat features a lightweight, stainless steel frame, adjustable legs, a removable mesh cover, articulating back and leg supports, head support, and Velcro-adjustable hip and chest belts. The chair is available in four sizes to accom

Medi Medical Bath Seat (Model 06-652-00)

Bath seat, adjustable height bench. Plastic seat with holes for water to flow through. Suction feet on legs. To adjust height of bench add metal extension legs.

Moen Folding Mesh Shower Seat

The Moen Folding Mesh Shower Seat is a shower or bathtub stool designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. This stool has a quick-dry mesh seat, rust-free handles and frame, and non-slip rubber feet. The unit folds for storage and transport. DIMENSIONS: 15.75 inches wide when unfolded and 2 inches wide when folded. CAPACITY: 250 pounds. WEIGHT: 4 pounds. WARRANTY/GUARANTEE: Limited lifetime warranty.

Moen Tool-Free Shower Chair

The Moen Tool-Free Shower Chair is a bathtub seat or shower chair designed for use by individuals with balance, mobility, or lower extremity disabilities. This height-adjustable chair assembles without tools and has a collapse-resistant leg design, a contoured seat back, and a non-slip seat surface with built-in drainage system. DIMENSIONS (WxD): The seat is 22 x 19.25 inches. The height adjusts from 15 to 21 inches high. The overall footprint is 18 inches. CAPACITY: 300 pounds. WARRANTY: Limite

Moen Tub & Shower Seat

The Moen Tub & Shower Seat is a bathtub or shower stool designed for use by individuals with balance, mobility, or lower extremity disabilities. This unit assembles without tools and has a contoured seat with built-in side handles and a handheld shower holder.DIMENSIONS (WxDxH): 20 x 18 x 17.5 inches. The overall footprint is 17 inches. COLOR: White. CAPACITY: 300 pounds. WARRANTY: Limited lifetime.

Non-Adjustable Bath Chair (Models B0403, B0435 & B0457)

The Non-Adjustable Bath Chair, models B0403, B0435, and B0457, is a reclining bath seat designed to to provide children and adults with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. . This chair has a frame constructed of PVC tubing and a mesh seat. The mesh is removable for cleaning. OPTIONS: Leg and body restraining belts; wheeled base; suction cups; and a head stabilizer are available. SIZES: Child (model B0403) for individuals 3 feet

Otter Bath Seat (Models Ot 1000, Ot 2000, & Ot 3000)

The Otter Bath Seat is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs, has a folding plastic frame and is upholstered with removable, machine-washable mesh fabric, and includes two adjustable positioning belts and width- and height-adjustable head cushions. Leg straps control abduction and adduction. The seat and back are angle-adjustable and have five angle adjustments

Quantum Bath Chair (Models Q100C & Q100F)

The Quantun Bath Chair is a bath seat designed for use by individuals with mobility disabilities. This compact, collapsible chair is designed for travel or daily use and the lightweight PVC frame requires no tools for disassembly. The flexible configuration adapts for right or left entry and transfer and right or left faucets. This seat features stainless steel hardware, suction-cup tips on the legs, a covered back support, and a single armrest. A channel in the seat enables the shower curtain

Rentwood Bath Seat (Models 09-107-2941 & 09-107-2990)

The Rentwood Bath Seat, models 09-107-2941 and 09-107-2990, is a bath seat designed for use by individuals with mobility disabilities. As the user sits on the seat, the unit wedges ½rmly between the sides of the bath, giving a stable platform. The seat is padded vinyl (09-107-2990) or molded plastic (09-107-2941), and is mounted on a coated steel frame, to which are bolted two hinged side paddles. These are adjustable in width using wing nuts. The paddles, which are tipped with soft protective e

Rubbermaid Bathing Seat

The Rubbermaid Bathing Seat is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 11.3 pounds.

Rubbermaid Bathing Seat With Back Support

The Rubbermaid Bathing Seat with Back Support is a bath seat designed for use in most bathtubs by individuals with mobility disabilities. This one-piece molded seat features the Exact-Level System to permit custom height adjustment, large easy-grip handles in the seat and back, drainage perforations in the seat, and molded-in storage for a hand-held shower (not included) and soap. DIMENSIONS: The seat is 18 inches wide and the height adjusts from 17 to 22 inches. CAPACITY: 300 pounds. WEIGHT: 9.

Savanah Bath Seat

The Savanah Bath Seat is a shower stool designed for use by individuals with spinal cor injury or mobility or balance disabilities. The molded plastic stool has suction cups on the legs for maximum security and a partial cutaway for easier personal cleaning. The seat can be used in cunjunction with a bathboard (not included). OPTIONS: Also available with seat height of 6 inches. DIMENSIONS: 15.75 x 9.5 x 8 inches high. CAPACITY: 420 pounds. COLOR: White.

Savannah Slatted Bathseat

The Savannah Slatted Bathseat is a bath seat designed for use by individuals with lower extremity, balance, neurological, or mobility disabilities. Made from smooth, reinforced plastic slats, the seat has four suction cups to hold it securely in position in the tub. DIMENSIONS: The seat is available in 8 or 12 inches high. The seating area is 18 x 11.25 inches. CAPACITY: 420 pounds. WEIGHT: 4 pounds.

Security Bath Chair (Model 100)

The Security Bath Chair, model 100, is a bath seat designed for use by individuals with mobility or severe physical disabilities. This seat has an epoxy-coated aluminum frame and aquamesh upholstery. The frame is availavlble with rubber or suction feet. OPTIONS: Headrest and seat belt. DIMENSIONS: The base is 15.5 x 23 inches and the seat is 18 x 17 inches. The back is 32 x 17 inches with a 35-degree angle. COLOR: White frame with a choice of forest green or navy upholstery.

Shower / Bath Chair With Backrest (Model 1369)

Aluminum bath chair. Molded plastic seat has drain holes to keep water in the tub. Handles on each side. Non-slip textured finish with contoured seat and back. Flared legs. Non-slip rubber tips. Back height 13 inches. Weight 8 pounds. Fits inside standard tub.

Shower Aide Chair

The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit

Shower And Bath Seat (Models 6483, 6482, 6463, & 6462)

Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Padded vinyl seat and back. Rubber suction cups on all feet. Fits inside standard tub.

Shower And Bath Transfer Aid (Models 6481, 6484, 6461, & 6451)

Adjustable height aluminum bath seat. Seat width 17 1/2 inches. Seat depth 16 inches. Seat height 16 to 20 inches. Vinyl coated seat standard or deluxe padded Ensolite high-density foam padding, does not absorb moisture. Spans tub wall enabling easy transfer.

Swivel-Bather

The Swivel-Bather is a bath seat designed for use by individuals with mobility disabilities. This seat fits securely over any standard bathtub and consists of a molded seat with aluminum armrests affixed to a PVC resin tubing base. The seat rotates 360 degrees and can be locked in any of four positions. The seat back folds and locks for storage and transport. The unit can be removed to allow the tub to be used for unassisted bathing. OPTIONS: Detachable seatbelt. DIMENSIONS: The seat is 18 inche

Swiveling Shower / Bath Seat

The Swiveling Shower/Bath Seat is designed for use by individuals with spinal cord injury or mobility or balance disabilities. This chair-style seat rotates to assist the user in swinging his or her legs into the tub and locks in four positions. The seat attaches to a removable fixed base that is fitted to the bathtub. The unit has a steel frame with a plastic seat with two large openings in the back and drainage holes in the seat. DIMENSIONS: The seat is 15 inches square and the unit fits tubs

Todd Bath Seat

CUSTOM ADAPTATION PURPOSE: To provide a child with global developmental delays and low muscle tone with appropriate seating and positioning for bathing. The chair is made of PVC pressure pipe and fittings, with a seat and back of outdoor fabric. The seat is also equipped with a webbing pelvic strap and crotch strap. The base frame is fitted with suction cups for security and stability. The seat back is fixed at 90 degrees to the seat and the entire seat unit can be reclined from 32 to 50 degree

Transfer Benches (Models K10366 & K11119)

Transfer Benches, Models K10366 & K11119, are bath seats designed for persons with physical disabilities using wheelchairs. The unique design allows individuals to slide from a wheelchair into the tub. The backrest can be flipped for either right or left setup and a push-button height adjustment and rubber non-slip feet provide additional stability. Seats come in either padded or solid polyethylene versions. DIMENSIONS: Seat height adjusts from 17.5 to 22.5 inches. Seat measures 16.5 x 27 in

Tromode Bathboard

The Tromborde Bathboard is a bath seat designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. Available with four or six slats in the seat, these seats are made of polypropylene and PVC plastics, and the slats are reinforced with treated wood. Four clamps on the underside of the bathboard enable it to be adjusted to fit the internal width of the bathtub. Corrosion resistant materials used in all fittings. Thermoplastic elastomer (TPE) corner mountin

Tub Modifications

DO IT YOPURSELF ENTRYPURPOSE: To make bathing safer and more accessible for individuals with mobility disabilities and seniors. This section of a chapter entitled "Bathroom and Washing Up" provides a selection of suggestions for simple ways to make bathtub use safer and more accessible. Included are discussions about installing a hand-held showerhead and grab bars, purchasing and using a bath or shower bench or chair, ensuring sufficient lighting, installing anti-scalding devices, and adapting s

Tubby Ii Folding Bath Bench (Series 310)

The Tubby II Folding Bath Bench, series 310, is a bath seat designed for use by individuals with mobility, balance, or lower extremity disabilities or arthritis or spinal cord injury. This seat has a height-adjustable folding steel frame and a padded seat with a commode opening to provide access for perineal cleaning, and a sling-style back. Adjustable stabilizers to assist with transfers are attached; a split between the stabilizer and seat allows the shower curtain to close. The armrest doubl

Universal Bath Bench

The Universal Bath Bench is a bath seat designed for use by individuals with mobility and balance disabilities. Available with or without a back, the seat fits in most tubs and shower stalls and can be assembled without tools. A smooth-edge notch on the seat provides placement for a hand-held shower (not included). The all-plastic frame eliminates rusting and the height adjusts by turning the leg base. DIMENSIONS (HxDxW): 17.5 x 18 x 21 inches without back; 29.5 x 18 x 21 inches with back. The

Versabathseat

The VersaBathSeat is a bath seat designed for use by individuals with mobility disabilities. The unit is adjustable and clamps to most bathtubs, locking with a large adjustment knob. The seat rotates 90 degrees to accommodate both right and left entry and enabling the user to sit on the seat outside the tub and rotate to enter; the process is reversed for exiting the tub. Handles on each side of the seat aid in transfers. This lightweight unit folds for transport and storage. OPTIONS: Hygenic sp

Parent Category: Bathtub Seats General
 
Processing...


Driving Walking/Biking Public Transit  Get Directions