Capacity Under 100 Pounds

Results: 103

4-In-1 Trike

The 4-In-1 Trike is a child's tricycle designed for use by young children with lower extremity, mobility, neurological, or balance disabilities. Designed for children 9 months to 5 years old, this 4-in-1 tricycle converts from a stroller to a steering trike, to a learning to ride trike, and to a classic trike. Features of this steel-framed trike include a removable wrap-around tray with cup holder, a removable 3-point harness, a removable headrest, and a removable adult height-adjustable push ha

8720 Delta Swim System

The 8720 Delta Swim System is a float swimming aid designed to aid in progressive swimming development and may be most appropriate for individuals who can maintain postural equilibrium with controlled arm movements. The Delta is also designed to help maintain a vertical position in the water to assist with walking, running, and aerobic exercises. By utilizing the water's resistance, rehabilitation therapy can be directed at a specific area or muscle grouping. This body float is constructed of du

8725 Head Float

The 8725 Head Float is a float swimming aid designed to support the head of individuals with reflex domination. The cushioned support allows the head to rest without pressure on the spinal column, encouraging neutral positioning. This swimming aid is made of vinyl-coated flotation foam. SIZES: Small (for users weighing 20 to 30 pounds), medium (for users weighing 40 to 50 pounds), and large (for users weighing 60 to 175 pounds). DIMENSIONS (LxWxT): 16 x 12 x 1.5 inches (small), 20 x 13 x 2 inche

8727 Dolphin Float System

The 8727 Dolphin Float System is a float swimming aid designed to compensate for uneven weight distribution in swimmers with physical or neurological disabilities. This harness style foam device has two removable side pads to minimize lateral rotation. A removable front third pad provides additional lift. OPTIONS: Stabilizer Bar for increased stability; swim rings for added head and neck support; and the crotch strap to prevent the flotation harness from riding up while swimming. SIZES: Small (

A-6 & A-6S

The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch inc

Acid Reflux (Ar) Pillow For Babies And Infants & Deluxe Ar Pillow For Babies And Infants

The AR Pillow for Babies and Infants is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted pill

Adjustable Bath Chair (Models B0732, B0740 & B0848)

The Adjustable Bath Chair, models B0732, B0740, and B0848, is a reclining bath seat designed to provide children with lower extremity, mobility or severe physical disabilities with a stable, comfortable seat while bathing. This chair has a frame constructed of PVC tubing and a mesh seat. The top and bottom rails of the frame are padded. The angles of back and leg rests of this bath chair are adjustable, and the chair includes chest and leg safety straps. The mesh is removable for cleaning. OPTIO

Adult Head Float

The Adult Head Float is a float swimming aid designed for use by individuals with neurological or upper extremity disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. This float rests on the user's shoulders and wraps around the neck, holding the head above water. CAPACITY: 50 to 175 pounds.

Alvema Ito Stroller

The Alvema Ito Stroller is a lightweight tilt-in-space stroller designed for use by children with physical disabilities. FRAME (HxLxW): The folding frame is available in two sizes. Folded dimensions are 23 x 13 x 30 inches (small) or 25 x 13 x 33 inches (large). The total width is 23 inches on the small size or 25 inches for the large size. Standard features include a height adjustable handle. Other optional accessories include a basket, sunroof, rain/wind cape, or grip rail. SEAT (LxW): 9 to 11

Ameriglide Manual Wheelchair Lift 100

The Ameriglide Manual Wheelchair Lift 100 is a hitch-mounted wheelchair lift designed for use by individuals with mobility disabilities or spinal cord injury. The user places a folded manual wheelchair onto the platform, then pushes a button to raise the wheelchair. The lift can be installed on almost any vehicle with a class I, II, or III hitch as well as standard ball mounts. OPTIONS: Swing-away arm; manual wheelchair cover; receiver hitch. POWER: Uses vehicle battery. DIMENSIONS (HxW): 5 to 1

Aqua Sprinter Flotation Belt (Model 700)

The Aqua Sprinter Flotation Belt is a float swimming aid designed for use by individuals with physical or neurological disabilities. This device is worn around the waist and can suspend an individual in a position that enables the spine to be suspended neutrally. The belt is designed to hold the swimmer securely at the waist in an upright position, with no tipping forward. This belt is made of closed-cell EVA foam and is latex free. It is equipped with an adjustable belt. OPTIONS: Instructional

Aquatic Therapy Float

The Aquatic Therapy Float is a float swimming aid designed for use by children or adults with lower or upper extremity disabilities. This flotation device supports the user in a prone or supine position for aquatic therapy for lower and upper extremity strengthening and range of motion. The device's contour lines allow free movement of arms and legs while the individual is securely strapped on the float. SIZES: Small, medium, and large. CAPACITY: The small model supports up to 50 pounds; the med

Arrow Walker Advantage

The Arrow Walker Advantage is a child's walker designed for use by children and smaller adults with cerebral palsy or other neuromuscular conditions. It can be used for taking first steps or to develop existing walking and standing abilities as part of a gait training program. The walker's low profile arrow shape allows easier access through doorways and around obstacles, and three directional locking casters allow the user to walk a planned course. The trunk support system includes a chest pad

Bath Bather

Baby Bather is designed for use by infants and toddlers who required additional support during bathing activities. The Baby Bather is designed to fit on the base of the bathtub. The Bather holds the baby securely allowing you to concentrate on washing using two hands. Made from hygienic polypropene with a soft PVC mattress, the Bather has an adjustable backrest for ease of positioning on the bath. DIMENSIONS: Backrest length: 480 millimeters, seat Length 200 millimeters, backrest width 360 milli

Beach Baby All Terrain Stroller (Model Bbs 100)

The Beach Baby All Terrain Stroller, model BBS 100, is a stroller designed for use by children with mobility disabilities. FRAME (WxHxL): 35 x 39 x 43 inches. The white PVC tubular frame folds for storage and transport. All hardware is stainless steel. SEAT: A reclining seat with a seatbelt is included. The stroller also features an underseat storage area. UPHOLSTERY: Mesh sling upholstery. Three wheels with aluminum axles and 12 x 6 inch balloon tires by Roleez Wheels, Inc. (see separate entry)

Beach Stroller

The BeachStroller is a stroller designed for use by children with lower extremity disabilities, mobility disabilities, and spinal cord injury. The stroller is lightweight and collapsible, and uses all-terrain Roleez Balloon Tires from Roleez Wheels, Inc. (see separate entry). OPTIONS: Storage compartment; cup holder; umbrella. DIMENSIONS (HxLxW): 36.5 x 40.5 x 31 inches. CAPACITY: 75 pounds. WEIGHT: 26 pounds.

Blue Wave Bathing System (Models E451, E452 & E453)

The Blue Wave Bathing System, models E451, E452 and E453, is a child's bath seat designed for use with children with physical disabilities. This chair supports the child in a sitting or reclining position at a height convenient for bathing with no obstructions for the caregiver. The unit consists of a detachable, adjustable seat and a stand to raise the seat further above the tub floor. The seat features two types of upholstery a soft, sturdy polyester knit or the standard vinyl-covered polyeste

Bronco Walker

The Bronco Walker is a child walker designed for outdoor use. This walker features a wide, stable base with four widely-spaced smooth-running wheels with large outdoor tires. Each wheel has brakes and directional stabilizers for safety. Other features include a removable back support, padded lateral supports, a handrest bar, padded armrests and handles, padded lateral supports, and an attendant handle. The unit disassembles for transport and storage. SIZES: Size 0 for children ages 0 to 3, size

Carrie Potty Seat (Models Pc 2771P & Pc 2771J)

The Carrie Potty Seat is a child commode designed to be positioned over a toilet or used as a free-standing unit. The shape of the commode maintains the user's legs in slight flexion and abduction to encourage bowel and bladder functions. Lateral supports and a tray help provide trunk stability. A built-in anti-thrust seat maintains pelvic positioning. The seat is made of Tumble Forms' high-density foam and covered with a flexible coating, making the Potty Seat washable, seamless, impervious to

Chair Topper

The Chair Topper is a car top mounted wheelchair carrier designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use a manual wheelchairs. Designed as an overhead wheelchair carrier for compact cars or sedans, this carrier is made of steel, aluminum and fiberglass. It folds, lifts and stores a folding manual wheelchair using power from a vehicle's 12 volt battery. Two switches control the 30-second cycle for stowing and extracting the whe

Child Head Float

The Child Head Float is a float swimming aid designed for use by children with upper extremity, neurological, or physical disabilities. This device is useful for a swimmer with under-developed reflexes and minimal head and limb control. The float rests on the user's the shoulders and wraps around the neck, holding the head above water. CAPACITY: 40 to 50 pounds

Child's Konfidence Jacket

The Child's Konfidence Jacket is a float swimming aid designed for use by children with physical or cognitive disabilities in aquatic therapy or while learning to swim. This neoprene buoyancy vest features eight removable floats. The flexible buoyancy allows users to alter their position in the water based on their requirements. This jacket promotes correct swimming position and helps children achieve a face forward position. This jacket is made from wetsuit-grade neoprene for comfort and durabi

Cloud Chair

The Cloud Chair is a vibrotactile amplification system designed for use with children with cognitive, neurological, or emotional disabilities. Used for positioning, calming, and entertaining, this beanbag-style chair is made of soft-filled heavy-duty vinyl and features an integral backrest and surrounds the child on three sides. A built-in patented vibroacoustic speaker system provides tactile stimulation, enabling users to feel music as well as hear it for a full-body experience of sound and v

Comfy Toilet Lift Seat

The Comfy Toilet Lift Seat is designed for use by individuals with mobility disabilities. This unit fits over most toilets and doubles as a safety frame or it can be used with the included commode pail. This unit assists the user in sitting down and provides a lift up as the user's weight is shifted off of it without electricity. The armrests provide additional support and safety. CAPACITY: The weight limit is adjustable from 90 to 280 pounds. COLOR: White powder-coated frame, white seat, and bl

Creepster Crawler (Models Cr-1 & Cr-2)

The Creepster Crawler is a crawling trainer designed for use with children with neurological, physical, or lower extremity disabilities. This device consists of an aluminum frame on casters with an attached foam-padded harness that suspends the child in the four-point crawling position. The adjustable harness accommodates growth and allows for variability in the amount and distribution of weight bearing on the extremities. The front bars of the frame are padded for safety. The unit also has a pa

Crocodile Gait Trainer

The Crocodile Gait Trainer is designed for use in developing the walking skills of children with cerebral palsy or balance, neurological, or lower extremity disabilities. Standard features include a folding frame, anti-reverse locks, a height- adjustable back frame, rotational hand grips, directional lockout, and large solid wheels. OPTIONS: Sling seat; fold down seat; anti-tips; forearm supports with hand grips; and pelvic supports. SIZES: Sizes 1 and 2. DIMENSIONS (LxW): Size 1 is 28.75 x 24.5

Cruisaire (Models Ca11 & Ca13)

The Cruiseaire is a child's transport chair designed for use with children with mobility disabilities. FRAME (WxHxL): Both models have a lightweight folding frame with a grey hammertone finish. Open, odel CA11 is 20 x 37 x 31 inches without footrests and model CA13 is 21.5 x 37 x 33 inches without footrests. Folded, both models are 13 x 11 x 47 inches. An optional anatomic back frame is available on both models which stabilizes the head and neck to assist in the development of righting reflexes.

Cruiser (Models Cr11 & Cr13)

The Cruiser is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models are available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CR11 is 37.5 x 31.5 x 19.5 inches and model CR13 is 37 x 33 x 21 inches. Folded dimensions are 12 x 46.5 x 12.25 for model CR11 and 12 x 46.5 x 12 inches for model CR13. SEAT (LxW): 9 to 12 x 11 inches on model CR11 or 10 to 13 x 13 inches on mod

Cruiser Anatomic (Models Cx12, Cx14, Cx16, & Cx18)

Cruiser Anatomic is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This chair is available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CX12 is 36.5 x 44.5 x 21 inches, model CX14 is 36 x 36 x 23 inches, model CX16 is 37.5 x 39.5 x 26 inches, and model CX18 is 38 x 40 x 28 inches. Folded dimensions are 14 x 46 x 13 inches for model CX12, 14 x 46.5 x 14 inches for model CX14

Cuddlebug

The CuddleBug is a stroller designed for use with children with mobility, neurological, or severe physical disabilities. This stroller offers tilt, full recline, and hi/lo capabilities and accepts two seating modules to accommodate growth. The unit folds for transportation and storage without removing the seating module. The unit offers 5 to 30 degrees of adjustable tilt and 90 to 160 degrees of adjustable recline. Standard features include a height-adjustable push handle; a padded seat insert w

Dolphin Bath Seat (Model Do 2000)

The Dolphin Bath Seat, model DO 2000, is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs and has a folding aluminum frame upholstered with quick-drying mesh fabric. The chair is length adjustable and the seat and back adjust independently, with the back support offering 10 angle positions, including trendelenberg. The seat is depth-adjustable and offers five tilt positio

Easystand Magician-Ei

The EasyStand Magician-EI is a standing aid designed for children with mobility disabilities. This aid accommodates children in a variety of positions from seated to fully standing. This fully-adjustable device has a tubular frame, a wrap-around seat and back made of neoprene with Comfy Seat technology, side supports, knee supports, foot plates, a seat belt, a clear acrylic tray with front pad, four locking casters, and a gas spring lift mechanism. The Magician-EI, designed to be used by childre

Ergonomic Office Chair With Headrest

The Ergonomic Office Chair with Headrest is an adjustable office chair designed to provide, neck, back, and head support for individuals while working at a desk. Ergonomically designed, this chair features pneumatic seat height adjustment, 360-degree swivel, tilt tension adjustment, and tilt to lock chair in upright position. A two-to-one synchro-tilt (back reclines at two-to-one ratio to seat angle) allows the user to recline while keeping seat cushion relatively level to the floor. Other feat

Ez Rider (Models Ez12, Ez14, Ez16, & Ez18)

EZ Rider is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This folding lightweight wheelchair is available in regular and transit (bus/van tie-down) models. FRAME (HxLxW): Model EZ12 is 36.5 x 43 x 19.5 inches, model EZ14 is 37 x 44 x 20.5 inches, model EZ16 is 37 x 45 x 21 inches, and model EZ18 is 37 x 45 x 24 inches. Folded dimensions are 14.5 x 43 x 13.5 inches (model EZ12), 14.5 x 44 x 12 inche

Fatwheels (Models Tw1610 & Tw2010)

FatWheels are bicycle support wheels designed for use by children with balance disabilities. The wheels are made of high impact polypropylene with EVA (ethylene vinyl acetate) foam tires. EVA foam is a semi-pneumatic, air-bubble filled plastic material which does not require inflation. The wheels have conventional ball bearings and adjustable cones. Wheels are available with Standard or Large chain stays. SIZES: Model TW1610 fits 12- and 16-inch bikes; model TW2010 fits 16-, 18-, and 20-inch b

Flamingo, The

The Flamingo is a child's bath and toilet seat designed for use by children with severe physical disabilities or mobility disabilities. Available in three sizes and designed for children from two to thirteen years of age, the unit consists of a height-adjustable wheeled frame and a removable, multi-use padded seat covered in waterproof upholstery. When removed from the frame, the seat can be used as a toilet seat or bath seat, Removable lateral sections provide additional support if needed. The

Gazelle By R82

The Gazelle is a prone stander designed for use by children with mobility disabilities. Available in three sizes, this stander may also be used for postural drainage and as a tilting table with a variety of adjustments between 15 and 90 degrees. It features a Y-shaped base with four locking wheels, foot-pedal angle adjustment and a degree meter, height- and width-adjustable footrests, rear support, padded chest support, and padded knee supports. The leg rests are independently adjustable with ea

High Back Mobile Chair (Models R6321, R632, & R633)

The High Back Mobile Chair is a positioning chair designed for use by individuals with severe physical or neurological disabilities who require upper body support. The chair includes the mobile chair frame, a high backrest with push handle, pads, armrests, and footboard and sandals. The seat is available with a choice of seat tilt or seat spring action. The seat and backrest are contoured and padded, and a hip strap clips into the chair in a variety of positions to meet user needs. The armrests

High-Low Chair

The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-line

Homewaiter 75

The Homewaiter 75 is a dumb waiter designed for home or office use by individuals with mobility or upper extremity disabilities. This monorail-style unit features an aluminum rail and a steel car and can accommodate openings on three sides. The unit offers automatic controls from any floor. Safety features include a broken cable safety device and slack cable disconnect. The unit comes partially pre-wired and pre-assembled for easy installation. POWER: Uses standard household current. DIMENSIONS:

Junior And Adult Low Profile Vertical Stimulation Device (Model 6000 & 6002)

The Low Profile Vertical Stimulation Device (VSD), models 6000 and 6002, is hardware for suspended equipment designed to provide vertical stimulation for individuals with physical disabilities. It provides vestibular and proprioceptive stimulation because it allows controlled bounce and vertical movement in a controlled area. It is similar to the standard VSD (see separate entry), but offers greater bounce capabilities because it comes with its own Rotational Device and can be used with low (eig

Junior And Adult Vertical Stimulation Device (Models 1930 & 1932)

The Vertical Stimulation Device (VSD), models 1930 and 1932, is additional hardware for suspended eauipment designed to provide vestibular and proprioceptive stimulation for individuals with physical disabilities. It can be used with the Flexion Disc, T-Bar, or Therapy Net (see separate entries) to control bouncing and vertical movement. For versatility, there are four different straps that the equipment can be attached to with a Safety Snap (see separate entry). Two Safety Snaps are included. O

Kaye Partial Weight-Bearing Walking Frame (Model Sw1)

The Kaye Partial Weight-Bearing Walking Frame, model SW1, is a child's walker or standing frame designed for use by children who have a wide range of disabilities due to neuropathy, including postural control, interlimb coordination, and steady state and reactive balance. The Kaye Walking Frame supports the user in the upright, walking, or partial weight-bearing position using a combination of an overhead suspension frame, a manual winch, a harness, removable handlebars, and swivel casters with

Kimba Pediatric Tilt-In-Space Mobility System

The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated

Kiwi Bath Chair

The Kiwi Bath Chair is a bath seat designed for use with children with mobility disabilities. This unit features a hand-operated mechanism to raise and lower the seat for positioning during bathing and transfers. A lever enables the unit be secured in the tub without permanent fixtures and it can be removed as needed. The unit features a mesh seat with positioning straps. DIMENSIONS: The unit fits children measuring 27 inches from the bottom of the buttocks to the mid-ear. When removed from the

Ladybug Corner Chair

The Ladybug Corner Chair is a corner seat designed for use by children three years old and under with neurological or mobility disabilities. This chair facilitates upright sitting and head control, offers support for straight-backed sitting, and helps protract the shoulders so that arms can come forward to function in midline. The seat back adjusts forward or backward along the seat base to enable the children to sit either in a long-leg or in a conventional sitting position. In addition, the se

Lisa Pediatric Postural Mobility System (Models 3207 & 3208)

The Lisa Pediatric Postural Mobility System is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Model 3207 is 13 x 41 x 11 inches when folded; model 3208 is 17 x 42 x 16 inches when folded. The frame is Saturn Blue Metallic. SEAT (LxW): Model 3207 is 10, 12, or 14 x 12 inches without upholstery and model 3208 is 12, 14, or 16 x 14 inches without upholstery. Upholstery adds two inches to width. The seat width may be reduced using

Lite Rider (Models Lr12 & Lr14)

Lite Rider is a lightweight child's wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36.5 x 43 x 19.5 inches for model LR12 or 37 x 44 x 20.5 inches for model LR14 inches. Folded dimensions are 14.5 x 43 x 13.5 inches (model LR12) or 14.5 x 44 x 12 inches (model LR14) inches. The frame has a gray hammer-tone finish. Rear legs, caster stems, fabric tubes, and axle brackets are made of aluminum. SEAT (LxW

Little People Tot Rod

The Little People Tot Rod is a powered outdoor riding toy designed for use by children with lower extremity or mobility disabilities. Intended for children 12 to 36 months old, this toy offers two stages of use. In stage one, parents can use the included rear assist handle to control power and steering. In stage two, the child can operate the car independently with the assist handle removed. The power button is located in the steering wheel for ease of operation. Other features include an activi

Little Ram (Model 6A4)

The Little Ram, model 6A4, is a child's tricycle designed for use by children with physical disabilities. The basic unit has a powder-coated steel frame with nylon bushings; a bucket seat with tilt forward/back seat adjustment and infinite back to front positioning; cushioned drop-style handlebars; solid synthetic rubber tires (latex free); large, slip-resistant pedals; turn-stop to help prevent tipping; steel foot crank; and solid wheel rims. There are no steps for getting on this tricycle. DIM

Lj-A (Life Jacket-Adapted)

The Lj-A (Life Jacket-Adapted)is a personal floatation device designed for use by children and adults with physical disabilities. This latex-free swimming aid maintains the user in an upright position while keeping the head completely out of the water. CAPACITY: Models are available to accommodate users from 18 to 250 pounds. WARRANTY: Unconditional money-back guarantee

Mc5

MC5 are suspension caster forks designed for use on lightweight low-profile sports wheelchairs. Available in a choice of light-, standard-, or heavy-duty models these aircraft aluminum forks retrofit most sports chairs and feature polymer shock absorbers that reduce the effect of vibration on the wheelchair user. They also reduce the chance of the user being pitched from the chair when the front wheels encounter obstacles; each wheel travels independently over the obstacle. These forks offer a c

Mini Go-Bot

The Go-Bot is a powered cart designed to provide mobility and independence for children with mobility disabilities. Designed for children ages one to eight and up to 36 inches tall, this device can also be used as a transitional aid to train for powered wheelchair use. The device is designed for indoor use or outdoor use on level surfaces and consists of an ABS plastic body, a supine standing frame, and a powered mobility base with a combination positioning seat/standing aid in the center which

Mini Peel, The

The Mini Peel is a recumbent or prone-style leg-powered tricycle designed for use by toddlers and young children with physical or balance disabilities. Part of the Fun Cycle series it is designed for riders from 36 to 41 inches tall. This cycle features a weather-resistant nylon sling seat with high back positioned between the rear wheels with a low center of gravity for stability. The pedals are located slightly in front of the front wheel. Handgrips on each side at hip height for steering an

Minwalk I & Minwalk Ii (Models 106061 & 106062)

The Minwalk I, model 106061, and the Minwalk II, model 106062, are gait trainers designed for use by children with mobility disabilities. These gait trainers have a dynamic spring assist movement which allows children to facilitate a more natural gait pattern as they step down into toe-off and heel strike, while assisting them to lift and swing through. Both models feature larger back wheels, front swivel caster wheels with swivel caster locks, adjustable-height trunk support, a height-adjustab

Motorized Scooter Board (Model 1510)

The Motorized Scooter Board, model 1510, is a scooter board designed to enhance motor planning skills, spatial orientation, and understanding of cause and effect relationships for individuals with physical or neurological disabilities. This scooter board is ideal for young children who have never moved independently, providing the opportunity to learn control their bodies in space and to learn to stop at obstacles. When activated by a capability switch (not included) connected to the control jac

Mountee (Models Mt12 & Mt14)

The Mountee is a child's tilt-in-space wheelchair designed for use with children with mobility, neurological, or severe physical disabilities. FRAME(LxWxH): Open, model MT12 is 19 x 16 x 22 inches; folded it is 20.5 x 17.5 x 9 inches. Open, model MT14 is 21 x 18.5 x 24 inches. The folding, tilt-in-space frame offers 5 to 45 degrees of tilt from the vertical. Push handles are standard. A crah-tested transit frame is available on both models. SEAT(WxD): Model MT12 is 8 to 12 x 11 to 15 inches. Mod

Mss Tilt And Recline (Models 4635 & 4636)

The MSS Tilt and Recline model 4635 and model 4636 are pediatric positioning seats designed to provide growth adjustments and optimum positioning for children with physical or neurological disabilities. FRAME: The chair is available with in a small low frame (model 4635, or medium high frame (model 4636). Each chair can be converted to a floor sitter. The low frame (small) l model raises height by 3 inches, and the high frame (medium) model raises height by 10 inches. SEAT (WxD): The seat is 9 x

Noggie‚Ñ¢ Plush

Noggie™ Plush is a support soft seat designed for use by premature infants weighing up to 8 pounds while positioned in a car seat or stroller. It has two firm arms that wrap around the infant to provide comfort and support. The flexible arms move up or down, to the front or sides to meet individual needs. The removable head supports and cradles the infants head and neck and can be adjusted up or down to accommodate the infants growing needs. The Noggie™ Plush slips easily into infant carrie

Otter Bath Seat (Models Ot 1000, Ot 2000, & Ot 3000)

The Otter Bath Seat is a child's bath seat designed for use by children with severe physical, neurological, balance, or mobility disabilities or spinal cord injury. This seat fits all standard tubs, has a folding plastic frame and is upholstered with removable, machine-washable mesh fabric, and includes two adjustable positioning belts and width- and height-adjustable head cushions. Leg straps control abduction and adduction. The seat and back are angle-adjustable and have five angle adjustments

Preemie / Bassinet Acid Reflux (Ar) Pillow

The Preemie/Bassinet Acid Reflux Pillow is a wedge pillow designed for use with babies with gastric reflux or eating and digestive disabilities. This pillow includes a quilted poly/cotton harness and head ring to hold a newborn safely and maintain a 30-Degree angle, the optimal angle to relieve acid reflux, gastroesophageal reflux, Barrett's Syndrome, post surgical conditions, etc. naturally. The head ring is attached under the cotton pillow sheet with Velcro to the pillow surface. The quilted p

Quad Float System (Models W9495 & W9496)

The Quad Float System is a floatation swimming aid designed for use by children or adults with neurological disabilities or spinal cord injury. This system allows positioning on the back or the stomach, and compensates for lateral rotation resulting from uneven muscular development. The system includes removable pads (two side, one front). SIZES: Small (model W9495) or large (model W9496). CAPACITY: 30 to 75 pounds for model W9495 or 75 to 200 pounds for model W9496.

Quickie Kidz

The Quickie Kidz is a lightweight child's manual wheelchair available in standard or reverse configurations. The reverse figuration features the large wheels in front. FRAME: This rigid frame chair is available in 10-, 11-, 12-, 13-, and 14-inch widths. This chair is available in a choice of regular frame length (8, 9, or 10 inches) or a long frame (11, 12, 13, or 14 inches). A choice of 11 standard and 3 custom frame colors is available. Rear anti-tips are standard and front anti-tips are avai

Quicklift Ii

Quicklift II is a pediatric hydraulic bath lift designed for use by caregivers of children with lower extremity, neurological, or severe physical disabilities. It is a portable, lightweight lifting device that helps caregivers lower and lift a child in and out of the bathtub. To use the device, it is placed in the tub, where suction cups hold it in place while a hydraulic cylinder raises and lowers the frame. It accommodates the Robby bathing support (see separate entry). The lift has a growth-a

Rabbit

The Rabbit is a mobile standing aid designed for use by children ages 1 to 18 with mobility disabilities. Equipped with wheelchair-style wheels, this unit includes an adjustable support frame, adjustable body supports, and adjustable knee supports. A tool kit for making the adjustments also is included. Other standard features include a pommel, chest strap, foot holders, heel supports, and a play box to enable children to store and transport belongings. The unit disassembles for storage and tran

Reclining Bath Seat (Models 6518, 6518-01 & 6518-04)

The Reclining Bath Seat is designed to provide full-length trunk support for children and small adults during tub bathing. The Seat features a PVC tubing frame with over-sized rubber feet to secure the seat and prevent marring, a rip-proof mesh fabric back and seat, a pelvic belt, a removable and repositionable torso allignment belt, and safety buckles. OPTIONS: Head support and extension legs. DIMENSIONS (WxLxD): Model PC 6518, the Children's model, is 17 x 28 x 12 inches; model PC 6518-01, the

Rifton Advancement Chair (Models R901, R902, & R903)

The Rifton Advancement Chair is a modular seating system that promotes functional sitting for individuals with physical or neurological disabilities. This chair provides total support for people with little motor control or muscular strength. As sitting skills and strength are gained, this modular chair can be configured for decreased support. Adjustable arm prompts accommodate variable positioning, and assist in supporting posture for users that are unable to hold themselves upright for periods

Rifton Extra-Small Dynamic Stander (Model K110)

The Rifton Extra-Small Dynamic Stander, model K110, is a mobile standing aid designed for use by children 25 to 32 inches tall with lower extremity or mobility disabilities. The stander comes with a contoured body support, straps, seat pad, and fleece that can be adjusted to accommodate users with zero to full weight-bearing abilities. Its wide standing platform helps the user to spread his or her legs for hip development, or to accommodate leg braces. The platform is free of obstruction to faci

Rifton Pacer Gait Trainer Small (Model K501)

The Rifton Pacer gait Trainer Small, model K501, is a gait trainer designed for use by children with walking and balance disabilities. This gait trainer features five supportive prompts that provide weight-bearing assistance and alignment. The prompts mount on the top bar with clamps, and can be removed when they are no longer needed. The basic unit is a lightweight aluminum frame with a stable U-shaped base with four large-diameter caster wheels. The casters have separate control features for b

Rifton Prone Stander Small (Model E930)

The Rifton Prone Stander Small. model E930, is designed to accommodate children with mobility or neurological disabilities 25 to 48 inches tsll. The stander includes a padded trunk board on a mobile frame with four locking casters, trunk laterals, hip strap, and an adjustable footboard. A hand-crank tilts the board from vertical to horizontal and the board can be secured at any angle. The removable, padded support blocks adjust to any position along the length of the board. The casters are non-m

Rifton Small Dynamic Stander (Model K130)

The Rifton Small Dynamic Stander, Model K130, is a mobile standing aid designed for use by children with lower extremity or mobility disabilities. This stander comes with straps, seat pad, and fleece, and contoured padded body that can be adjusted to accommodate users with zero to full weight-bearing abilities. Its wide standing platform helps the user to spread his or her legs for hip development, or to accommodate leg braces. The platform is free of obstruction to facilitate placing the child

Rifton Stationary Chair Small (Model R611)

The Rifton Stationary Chair Small, model R611, is a youth positioning chair designed for children 36 to 46 inches tall with mild physical or neurological disabilities. Intended for children who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame and backrest with armrests and pads. The seat depth is adjustable, and there is

Ring Support Walker (Models C0110-A & C0110B)

The Ring Support Walker is a child's adjustable walker designed for use by children withmobility, neurological, or lower extremity disabilities. Designed for children requiring minimal to moderate support to enhance mobility, weight bearing, and gait training, this walker features an I-shaped base with four caster wheels with brakes, zero to 20 degrees tilt-in-space to reduce or eliminate toe walking, a contoured back support, and a bult-up hip positioning belt. This walker is height- and angle-

Rock, Roll 'n Ride Trike & Rock, Roll 'n Ride Trike Xl

The Rock, Roll 'n Ride Trike and the Rock, Roll 'n Ride Trike XL are combination child's tricycles and rocking boats designed for use by children 18 months to five years of age. These ride-on toys can be used three ways: The base locks in place, enabling the child to sit on the molded tricycle and rock. As the child grows, the rocking base converts to a push handle to provide assistance as the child learns to pedal. When the child is ready to ride the tricycle independently, the handle can be re

Rodeo 12 / 14 / 16

The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment.

Sammons Preston Tugs Pediatric Prone Stander (Model 4617A)

The Sammons Preston Tugs Pediatric Prone Stander, model 4617A, is a prone and supine stander designed for use by children with mobility disabilities. This stander is designed to keep children 25 to 48 inches tall in a prone position. Features include a fully vertical adjustable mainboard, knee board and footboard. Other features include a hand crank that provides quick and easy angle adjustments and nonslip, removable support pads that move to any position along the length of the board. Interna

Seattle Ankle Block (Models Sab310, 311, 312, 313, 320)

The Seattle Ankle Block is designed for the exoskeletal setup of the Child'sPlay, Seattle Foot, and Seattle LightFoot for individuals with lower limb amputations. It is lightweight, easily shaped, and made of high strength rigid polyurethane foam surrounding a nylon core. It is designed to be durable to withstand the forces imposed by dynamic response feet. DIMENSIONS: For model SAB320: foot size range 22 to 29 centimeters, minimum clearance 6.1 inches. For model SAB310 (low profile): foot size

Seattle Lightfoot Low Heel Rise (Model Slf135)

Seattle LightFoot is a prosthetic foot designed for all ages and activity levels for individuals with a lower extremity amputation. This prosthetic features the Delrin II dynamic keel response; slim, sculpted, natural cosmesis; and a lightweight design. It is appropriate for use by unilateral and bilateral amputees, syme level and higher, and it is interchangeable with the 0.75 inch Seattle Lightfoot. DIMENSIONS: Available in sizes from 22 to 30 centimeters (8-5/8 to 11.75 inches), and in widths

Seattle Natural Foot (Model Snf150)

The Seattle Natural Foot is a prosthetic foot designed as an alternative to the SACH foot for individuals with a lower extremity amputation. It has the performance characteristics of a compliant foot plus the additional benefits of cosmetic appeal and less weight, blended to perform naturally. This prosthetic foot features compliant keel for excellent roll-over during walking. The Natural Foot is appropriately designed for unilateral or bilateral lower extremity amputees of all ages with low to

Sensitrac Flat Pad With 360 Degree Angle Adjustable Arm

The Sensitrac Flat Pad with 360 Degree Angle Adjustable Arm is a suction pad system with an adjustable-angle mounting arm designed for use by individuals with communication, neurological, or upper extremity disabilities or spinal cord injury. This micro suction pad system is designed for switches and lightweight devices that require multiple positioning angles for better access. It can hold devices measuring up to 6 x 6 inches and weighing up to two pounds. The arm adjusts 360 degrees around and

Skoooch

The Skoooch is a leg-propelled three wheel cycle designed for use by children ages three through six years with lower extremity disabilities. This cycle combines the movement of cycling with the propulsion of a skateboard, enabling use by children unable to perforn the rotational motion of pedaling. This cycle has a single front wheel, handle bars, and hand brakes similar to those found on a standard bicycle. Rather than sitting, the user stands with one foot on each of two skateboard-style plat

Smartrider Breakaway Safety Stirrups

The SmartRider Breakaway Safety Stirrups are stirrups designed for use by individuals with balance or lower extremity disabilities or arthritis. Designed to break away in case of a fall, these stirrups work with both English and western saddles. These stirrups have rugged, high-density, shock-resistant construction, and they are molded with a rubber foot tread. They can also be used as a stirrup extension for mounting. The neck has a slot for English stirrup leathers. SIZES: Youth (fits riders 5

Snapdragon

The SnapDragon is a powered elevating wheelchair designed for indoor or outdoor use by children as young as one year old with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of the seat from the floor

Soft Rock & Bounce Pony

The Soft Rock & Bounce Pony is a rocking horse designed for use by children with balance, neurological, or lower extremity disabilities. Designed for children nine months to three years of age, this rocking horse has a rubber bounce suspension, a removable and washable fabric body, and easy-grip handles. The horse's ears make a crinkle sound. This rocking horse is available with or without motion-activated songs and sound. DIMENSIONS: 27 x 20.125 x 22 inches. capacity: 42 POUNDS. WEIGHT: 9.6

Southpaw Frog Swing (Model 1925)

The frog swing, model 1925, is a swing designed to provide proprioceptive stimulation and vertical movement for individuals who are gravitationally insecure and low tone. The user is supported across the stomach with a sling while the arms and legs are free to control the bouncing. The individual is in direct control of how much stimulation he receives as well as the security or insecurity of there position. The Safety Strap must be used with the Frog Swing to prevent overstretching the stimulat

Special Tomato Multi-Positioning Seat (Mps)

The Special Tomato Multi-Positioning Seat (MPS) is a youth positioning seat designed for children ages two to fourteen years old with severe physical disabilities. This chair features Hip Flex adjustment to provide seat to back angle positioning with adjustments of 15 degrees hip flexion and 15 degrees hip extension without recline. The chair adjusts to grow with the user and the cushions adjust to meet the child's positioning needs. The thigh depth extension seat cushion allows for growth. Feat

Superlight Shopping Cart

The Superlight Shopping Cart is a folding shopping cart designed for use by individuals with balance or walking disabilities or arthritis. The cart has an aluminum frame, a foam handle, large rear wheels, and front wheels that swivel 360 degrees for steering. This cart folds for storage. OPTIONS: Multi-Use Insert Bag,  

Therapeutic Fold-A-Buggy (Model Ap 118-15)

The Therapeutic Fold-A-Buggy, model AP 118-15, is a stroller and positioning chair designed for use by children with neurological disabilities or severe physical disabilities. This lightweight buggy provides positioning during transport and folds for storage in a car trunk. FRAME: The steel tubing frame has reversible handles. SEAT (WxD): 13 x 10 to 13 inches. The seat has a three-point positioning belt with a depth adjustable crotch strap. The back height is 21 inches. The back also offers vari

Thomashilfen Easys Stroller

The Thomashilfen EASyS Stroller is a child's stroller with a positioning seating system designed for use by children with neurological, mobility or severe physical disabilities. The stroller consists of a lightweight folding A-Chassis frame and the EASyS modular seating system. This stroller includes the Balance Safety System (BSS) to reduces the risk of the stroller tipping over by automatically sliding the seat forward when reclining the backrest, which shifts the center of gravity to a more s

Tom Pediatric Stroller

The TOM Pediatric Stroller is a lightweight tilt-in-space stroller designed for indoor and outdoor use by children or young adults with mobility or severe physical disabilities. The folding stroller is available in four sizes – Mini, Standard, Maxi and Super Maxi. FRAME (HxLxW): 39 to 45 x 33.5 x 24 inches (Mini and Standard); 40 to 46 x 36 x 25.5 inches (Maxi); and 42 x 43 x 27.5 inches (Super Maxi). Folded dimensions (HxLxW) are 21.5 x 36.5 x 24 inches (Mini and Standard); 24.5 x 37.5 x 25.25

Totalcare Spo2Rt Bed

The TotalCare Spo2rt Bed is a motorized bed designed for use by individuals recovering from burns or wounds or individuals with severe physical disabilities. This critical care bed includes Therapy-On-Demand modules that offer continuous lateral rotation therapy (CLRT) and percussion and vibration therapies. This helps mobilize secretions and other bodily fluids to aid in the prevention and treatment of pulmonary complications related to immobility. A head of bed alarm sounds automatically when

Tumble Forms 2 Ready Racer (Model 4770R)

The Tumble Forms 2 Ready Racer, model 4770R, is a hand propelled cart designed to help improve perceptual motor coordination for children with upper extremity and mobility disabilities. The cart is intended to improve perceptual motor skills, strengthen arms and upper trunk, and allow peer play for children 18 months to 5 years of age. The cart allows the child to play at peer level in indoor settings, and to maneuver in tight places. The cart moves easily over carpet and rough surfaces with min

Tumble Forms Carrie Seat (Models 4641L, 4641M, 4641S, & 4641Sa)

The Tumble Forms Carrie Seat, models 4641L, 4641M, 4641S & 4641SA, are positioning seating systems designed for insertion in mobility systems such as strollers, wheelchairs, or in vehicles. They may also be used at home or in school. The seats come with an adjustable footrest, headrest, and tray. Standard features include an anti-thrust seat to stabilize the pelvis; a seat back which articulates 20 degrees to accommodate abnormal trunk tone; an adjustable footrest to maintain hip, knee, and

Ultimate Car Seat

The Ultimate Car Seat is designed for use with children with balance, neurological, orother physical disabilities. This seat features fully-adjustable padded head supports and a five-point harness. The included positionining pad set can be used to provide support for smaller children. OPTIONS: Seat depth extender. DIMENSIONS: The inside width is 15.5 inches in the front and 14 inches in the back. The overall dimensions are 28 x 19 inches. CAPACITY: 20 to 102 pounds. WEIGHT: 11 pounds

Up N' Go (Toddler, Pediatric, & Youth)

The Up n' Go is a walker with lifter and gait trainer designed for use by children and youth with cerebral palsy, brain injury, or neurological, lower extremity, or walking disabilities. This unit consists of a mobility unit which is a wheeled walking frame with a wide U-shaped base with four casters, a suspension unit, and gas springs. The suspension unit is a carefully-designed harness that is designed to be comfortable to wear while sitting or standing and to be easy to put on or take off. Th

Upeasy Seat Assist (Models Upe 1 & Upe 3)

The UPEASY Seat Assist converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and when the user sits on it, it gently lowers the user to a seated position. To rise, as the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of the user's weight. This cushio

Uplift Seat Assist (Models Med-Ul 100 & Med-Ul 300)

The Uplift Seat Assist, models MED-UL100 and MED-UL300, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and the selector is set to the weight of the user. As the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of

Walkable (Models Wk75 & Wk100)

The WalkAble, models WK75 and WK100, is a suspension ambulation aid designed for use by children with mobility and walking disabilities. The device consists of an open wheeled base supporting a body suspension harness, enabling the child to be safely supported while walking over ground or on a treadmill. In combination with an appropriate training program, the WalkAble can help improve the user's gait patterns, posture, balance, muscle strength and overall endurance levels. The WalkAble unit is

Water Walker

Water Walker is a floatation device for aquatic exercise or recreation designed for use by children or adults with musculoskeletal or neurological disabilities or arthritis. This circular floatation device provides individuals with vertical position stability and support during water exercises and activities. It is available in two styles. The seat model supports hips at a comfortable angle. The belt and sling strap model supports weight-bearing users for hip extension. Both styles feature a chi

Youth Konfidence Jacket

The Youth Konfidence Jacket is a float swimming aid designed for use by youth ages 8 to 14 years with physical or cognitive disabilities in aquatic therapy or while learning to swim. This neoprene buoyancy vest features eight removable floats. The flexible buoyancy allows users to alter their position in the water based on their requirements. This jacket promotes correct swimming position and helps children achieve a face forward position. This jacket is made from wetsuit-grade neoprene for comf

Zippie

The Zippie is a child's lightweight manual wheelchair designed for use by children with mobility disabilities. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional.A growth kit is included to expand the fame to meet the user's needs. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths ran

Zippie 2

The Zippie 2 is a lightweight manual child's wheelchair. FRAME: Folding back with collapsible crossbrace. The frame is available in a choice of 12- to 16-inch widths in 1-inch increments, in regular and kids lengths with multiple growth adjustments. A free growth kit is available with this chair. The frame is available in a choice of 11 standard colors and 3 custom colors. Rear anti-tip tubes are standard; front anti-tips are optional. SEAT: Accepts a wide variety of seating inserts for customi

Zippie Ts

The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel

Parent Category: Universal
 
Processing...


Driving Walking/Biking Public Transit  Get Directions