Exercise Machines

Results: 88

AC5000 Treadmill

The AC5000 Treadmill is a treadmill exerciser designed for use in wellness programs, in cardiac or pulmonary rehabilitation, or by seniors in senior centers, retirement communities, assisted living facilities, nursing homes, and long term care facilities. The unit has a low starting speed of 0.1 miles per hour, adjustable in 0.1 increments to 12 mph. Elevation is adjustable from 0 percent to 15 percent in 0.5 increments. Elevation and speed can be adjusted while exercising using side handrail sw

Apt-1 Hi-Lo Active Passive Trainer

The APT-1 Hi-Lo Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors or individuals with neurological or physical disabilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg exercise. It can be positioned low near the floor for lower body exercises or raised up to table top height for upper body workouts. An assortment of accessories are available to enable users with a

Apt-1 Portable Active Passive Trainer

The APT-1 Portable Active Passive Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. This portable standalone unit with an adjustable angle base can be used on a table top for upper body workouts, or on the floor for lower body exercise while the user is seated in a wheelchair or chair. An assortment of accessories are available to enable users with a variety of phy

Apt-5 Active Passive Digital Trainer

The APT-5 Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. This portable, standalone unit with an adjustable angle base can be used on a table top for upper

Apt-5 Hi-Lo Active Passive Digital Trainer

The APT-5 Hi-Lo Active Passive Digital Trainer is a continuous passive motion device and progressive resistance arm and leg exerciser designed for use by seniors and individuals with neurological or physical disabilities. Fully digital, this unit enables the user to control speed, resistance, amount of spins and load levels. A remote control facilitates operation for users with limited movement abilities. The unit is mounted on an adjustable stand so it can be positioned for either arm or leg ex

Aqua Ciser System

The Aqua Ciser System is a treadmill exerciser mounted on the bottom of a therapy pool. Features include adjustable speed up to 6 miles per hour, a timer to control exercise session length, a clear door and side windows that permit view of the user's gait, and a seat that permits common pool therapies. Temperature controlled water is held in a reservoir and is treated with bromine. The system's fiberglass construction is durable and easy to maintain.

Arm/leg Ergometer Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted arm/leg ergometer for use by an individual with mobility disabilities and who uses a wheelchair. The article outlines a simple adaptation of an ergometer for use by those with lower extremity disabilities. The modification involves using PVC tubing to adapt an existing exercise ergometer. The first step to modify an existing arm/leg ergometer is to remove the seat. PVC tubing is purchased and then cut to construct one meter

Avari E705 Programmable Magnetic Elliptical

The Avari E705 Programmable Magnetic Elliptical is an exercise machine that provides a low impact workout for individuals with arthritis of the upper or lower extremities. This elliptical trainer exercises both the upper and lower body, including the quadriceps, hamstrings, glutes, chest, back, triceps, and biceps. It features smooth and quiet magnetic resistance, with 19 different exerccise programs, including a manual program, 12 preset programs, a user setting program, 4 heart rate control p

Bike Exerciser

The Bike Exerciser is designed to provide a piece of fitness equipment that is both enjoyable and motivating for a child with learning disabilities who is overweight and does not exercise often. The operating mechanisms of the Bike Exerciser are two four-bar linkages with a crank rocker; one on the left side and one on the right. The four-bar linkage consists of three moving links, one fixed link, and four pin joints. The handles, peddles, and cranks are moving links, while the body frame is

Body-Aline

The Body-Aline is an exercise machine and posture training activity for people with posture problems due to neuromuscular disabilities or lumbar issues. It is designed to gently stretch and strengthen the back and trunk postural muscles. The Body-Aline consists of a bench on which the users sits. A vertical bar is mounted in the rear of the bench with arm bars extending forward on either side of the user. There is also a foam roller mounted on the vertical bar. The heights of the arm bar and the

Bounce Back

The Bounce Back is an exercise machine designed for use by individuals with mobility disabilities. This device consists of a frame with a sling-style seat with a back support strap that provides motion and exercise similar to that of a mini trampoline. The user can change the muscle groups exercised by changing the position of his or her hands during the seated bouncing exercised. This device can provide cardio- vascular and strengthening exercise. CAPACITY: 250 pounds.

Cando Digi-Flex Hand/finger Exerciser

The Cando Digi-Flex Hand/Finger Exerciser is a patented spring-loaded resistance device for individual finger or entire hand exercises. The exerciser develops individual finger strength, flexibility and coordination as well as builds hand and forearm strength. Use the buttons alone to exercise fingers or the entire unit for a complete hand and forearm exercise.

Chairmaster

Chair Master is a chair that is designed for individuals who have mobility disabilities due to generalized weakness or neurological impairments. The ChairMaster is designed to allow users to sit comfortably while exercising. It combines a low impact cycling workout with resistance training to create a versatile resistance chair. It is suitable for all ages and fitness levels. The ChairMaster is designed to: Increase strength and flexibility - with smooth, low-impact resistance cords instead

Challenge Circuit (Model Ch7000)

The Challenge Circuit, model CH7000, is a weight exercise machine designed for use by individuals with spinal cord injury. This multi-purpose weight-training machine is equipped with various stations that allow paraplegics or quadriplegics to get a complete and total workout. It is a space-efficient, single-stack unit that enables individuals with varied arm and hand strength to perform at a comfortable level with little or no assistance. Exercise stations include a lat pull station for lat pull

Compact Core Exerciser

The compact core exerciser is designed to help those individuals with a weak core, thighs, or calves. It strengthens them and users will work on tone and strength. Exercisers sit on the padded saddle, rest their feet on the rubber bar and shift weight backward. The back and forth motion targets lumbar muscles, abs, glutes and thighs. This helps balance and posture. Lightweight. compact. Assembly required.

Concept2 Indoor Rower (Model E)

The Concept2 Indoor Rower, model E, is a rowing machine designed for use by individuals with mobility ot lower extremity disabilities or low vision. The height of the seat makes it easier to get on and off for individuals with limited flexibility or mobility of the knees or hips, or with difficulties maintaining balance. The rower comes with a PM4 performance monitor with five display options, including large print. A long monitor arm puts the performance display within reach. Other features inc

Core Laser Pro Exercise System By Laser Gym

The Laser Gym Core Laser Pro System is a therapeutic rehabilitation and training tool designed for physical therapy centers and other clinical settings. Each Pro system consists of two Core Laser Therapy Belts with travel bags, an institutional freestanding target that is specifically designed to accommodate a variety of patients, Tape Measure, Patient Progress Charting Material, instructional DVD and a premium carry case.

Dc Knee Cpm (Model Dc2480)

The DC Knee CPM, model DC2480, is a continuous passive motion device and leg exerciser designed for use in physical therapy of the knee joint. This unit supports range of motion from minus 10 degrees of extension to 120 degrees of flexion. The unit is compact with a sleek upper carriage and is capable of accommodating patients with limb lengths up to 42 inches.

Dc1000 Treadmill

The DC1000 Treadmill is a treadmill exerciser designed for use in cardiac rehabilitation and by seniors in senior centers, retirement communities, assisted living facilities, nursing homes, and long term care facilities. The unit has a starting speed of 0.4 miles per hour (mph), which can be progressively adjusted in 0.1 mph increments. The speed range is 0.4 to 9 mph. Elevation ranges from 0 percent to 9 percent. There is an automatic cool down after each exercise is completed. A heart rate c

Dynaflex Amber Powerball Gyro

The Dynaflex Amber Powerball Gyro with Glowing Amber Lights strengthens wrists, forearms, and other lower arm muscles. The powerball is used as a carpal tunnel exercise (for prevention and rehabilitation) and also for improving arm strength for most sports and physical activities.

Elly Pool Elliptical

The Elly Pool Elliptical is an elliptical designed for users who want to simulate a natural running motion while preventing joint impact. This device is recommended for use in water depths 3 to 5 feet. The resistance can be adjusted by the levers on the arms. Its brush steel finish will hold up to pool chemicals and outdoor environments. Product compatible with all types of water including sea, chlorinated, and bromine treated water. Product has scratch resistant wheels.

Endorphin Pro Gym Ct (Model En 365) & Endorphin Pro Gym (Model En 360)

The Endorphin ProGym CT, model EN 365, and the Endorphin Pro Gym, model EN 360, are weight exercise machines designed to building upper and lower body strength and size while improving cardiocvascular capacity for people with mobility disabilities. All major muscle groups may be exercised. Strength training features include: leg extension/standing leg curl, chest press, high pulley, low pulley and a 200-pound weight stack. The EN 365 CT also includes a hand cycle with pulse meter and an adjusta

Ergys 2 Rehabilitation System (Models E2-1 & E2-19)

The Ergys2 Rehabilitation System is an exercise machine designed for use by individuals with spinal cord injury (SCI) or neurological disabilities. This unit provides an intense workout for leg muscles. The user is strapped securely into a seat, and the feet are placed on pedals with foot protectors. Leg movement is controlled by five on-board computers. The exercise machine comes in systems for home use (model E2-1) or outpatient clinic use (model E2-19). The system for home use includes one se

Evo

The eVO is a motor assisted stationary therapy bicycle exerciser that provides reciprocating full-body motion to people who have little or no voluntary movement abilities due to neurological or physical disabilities. The eVO's motor-assisted handlebars move the upper body while the foot pedals move the lower extremities simultaneously in an interlinked "cross-patterning" manner. The intelligent motor in the eVO can be used in a Continuous Passive Motion, moving the user when they are unable to d

Exercise System

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted exercise system for an individual who has hemiplegia following stroke. For individuals who have had a stroke and now have reduced strength on one side can strengthen and re-stabilize should protraction through practiced movements using an exercise system. The system assists the individual retraining the brain to create new pathways damaged from the stroke. The traditional method of practicing shoulder protraction was not id

Exercise Unit (Model Nk 45)

The Exercise Unit, model NK 45, is an exercise machine designed for use in exercising the lower extremities. The unit is useful for resistive exercise programs for the knee, particularly the quadriceps and hamstring muscles. The unit consists of an electric welded steel frame with the top covered by naugahyde over foam padding. The chrome torque unit has an easy-to-read range of motion indicator, padded adjustable leg rest and stationary weight holder with securing cuff in addition to a pull pin

Flexiciser Original

The Flexiciser Original is an exercise machine designed for use by individuals with mobility disabilities. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals between 5 feet, 2 inches and 6 feet tall and most wheelchair types and there is no transfer required. ASSEMBLY: Minimal a

Flexiciser Pro

The Flexiciser Pro is an exercise machine designed for use by individuals with mobility disabilities or arthritis. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). Made of stainless steel for durability, this unit is designed for use in institutional settings, such as colleges, nursing homes, assisted living facili

Flexiciser Sport

The Flexiciser Sport is an exercise machine designed for use by individuals with mobility disabilities. Available in models for adults under 5 feet, 2 inches tall and children, this unit adjusts for the growing child and offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals and wheelchair ty

Flexiciser Tall

The Flexiciser Tall is an exercise machine designed for use by individuals with mobility disabilities who are six feet tall or taller. This unit offers a natural walking/running stride, moving arms and legs simultaneously with no weight-bearing impact on joints. This exerciser features three modes: Active (self), passive (FlexiMotor), and resistive (muscle toning). The unit accommodates most individuals and wheelchair types and there is no transfer required. ASSEMBLY: Minimal assembly required.

Fractal Machine

---- PROTOTYPE --------- PURPOSE: To design a prototype an device that attaches to a wheelchair to assist individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a manual wheelchair to exercise and maintain personal fitness. The Fractal Machine is a wheelchair exercise roller designed to assist wheelchair users to participate in anaerobic and aerobic exercises. It can also be used as a training device aid a new wheelchair user to adapt to using a wheelch

Gaitkeeper (Model Gk2200T)

The GaitKeeper rehab treadmill, model GK2200T, is a treadmill exerciser designed for use by individuals with neurological, lower extremity, or walking disabilities during rehabilitation and ambulation training. Integratable with the LiteGait (see separate entries), this high-torque treadmill has a cushioned running surface and a 4-horsepower direct current (DC) motor that can move the user at speeds as slow as 0.1 mile per hour. This treadmill includes a full-featured hand-held remote and a disp

Gaitkeeper Rehab Treadmill (Models 1800T & 2000T)

The GaitKeeper Rehab Treadmill is a treadmill exerciser designed for use by individuals with mobility or walking disabilities during rehabilitation and ambulation training. This high-torque treadmill has a 3-horsepower motor that can move the user at speeds as slow as 0.1 mile per hour. The control panel is movable to be within reach of the clinician. Distance readout is in feet for accurate charting of progress. The treadmill has adjustable inclines.OPTIONS: 14-inch platform for both models. DI

Hand Rails For Treadmill

CUSTOM ADAPTATIONPURPOSE: To provide support for a child with spina bifida during execise on a treadmill with handrails that are too high for the child. Two commercially available adjustable handrails are mounted on wooden blocks by resting them in round notches cut out of the blocks. The rails are held in place by brass straps, and the foot of each rail is encased in rubber to prevent slippage. The two mounted rails are placed on either side of the treadmill. The blocks are clamped to the side

Health Mark Osci Health Whole Body Vibration Machine

The Health Mark Osci Health Whole Body Vibration Machine is designed for use by individuals with acute back pain and those attempting to increase strength and stability in their hip flexors. It also improves circulation of blood and lymphatic fluid, increase bone density, stimulate and massage tired muscles, and decrease joint pain through rehabilitative techniques.

Incline Aquatic Underwater Treadmill By Aquabilt

Incline Aquatic Underwater Treadmill by Aquabilt is a water exercise device designed for individuals with arthritis and those trying to improve joint flexibility and cardiovascular endurance. It proves an easy-to-use, low-impact cardio workout. This non-motorized, self-powered treadmill is great for high resistance workouts and helps to burn calories faster while lifting pressure off of achy joints. The Aquabilt treadmill can be used by individuals of all fitness levels.

Kaye Walk-In-Place

The Kaye Walk-In-Place is a lower extemity exercise machine designed for use by children from two to twelve years of age with lower extremity, walking, or neurological disabilities. This unit can be used for fitness and conditioning, as well as for development of ambulation and post-operative strengthening. The device requires the user to stand upright and to bear weight and uses the pattern of walking for exercise. Reciprocally-lonked footplates to assist weight shift onto the weight-bearing li

Keiser Air250 Pneumatic Exercise Machine - Abdominal

The Keiser Air250 Pneumatic Exercise Machine - Abdominal is an air resistance exercise machine designed for use by frail older adults and individuals with physical disabilities. This machine has a fully adjustable seat with chest pads, and provides intense abdominal exercise without involving the hip flexors. Resistance is 0 to 310 pounds. DIMENSIONS (HxLxW): 50 x 38 x 38 inches. WEIGHT: 126 pounds.

Keiser Air250 Pneumatic Exercise Machine - Arm Curl

The Keiser Air250 Pneumatic Exercise Machine - Arm Curl is an air resistance exercise machine and arm exerciser designed for use by frail older adults and individuals with physical disabilities. The machine allows for a curl grip that develops the biceps muscle while protecting the wrists and elbows. The grips also allow for the hammer curl position for a better forearm workout. The articulated movement arm compensates for different lengths. Extra padding in the high-load areas and a fully adjus

Keiser Air250 Pneumatic Exercise Machine - Lat Pull Down

The Keiser Air250 Pneumatic Exercise Machine - Lat Pull Down is an arm and upper body exerciser designed for use by seniors and individuals with physical disabilities. The open handlebar design offers a range of motion adjustments to accommodate various body sizes and flexibilities. The resistance range is 0 to 250 pounds. It uses mechanical linkage to provide the proper linear pull, reducing the chance of injury to the user. DIMENSIONS (HxLxW): 73 x 60 x 45 inches. WEIGHT: 176 pounds.

Keiser Air250 Pneumatic Exercise Machine - Leg Press

The Keiser Air250 Pneumatic Exercise Machine - Leg Press is a leg exerciser and pneumatic exercise machine designed for use by seniors and individuals with physical disabilities. This machine has a bilateral leg movement function. The fully adjustable seated position protects the lower back by keeping it stabilized, offering a better pre-stretch on the gluteus muscles, which allows them to be more active during the exercise. The resistance range is 0 to 1000 pounds. DIMENSIONS (HxLxW): 48 x 60 x

Lma Deluxe Stepper With Handle (Model H4100)

The LMA Deluxe Stepper with Handle, model H4100, is a leg exerciser designed for use by individuals with lower extremity or balance disabilities or arthritis. This compact stepper can be used for low impact aerobic exercise for the whole body. The unit has two plates on which the user stands during stepping exercise while grasping the handle. The machine has an adjustable tension pulley system with dual hydraulic cylinders that work independently. A built-in digital computer controls the speed b

Lokomatnano

LokomatNano is a robotic gait training system designed for use by individuals with stroke, brain injury, cerebral palsy, spinal cord injury, or other mobility, neurological or walking disabilities. The system consists of a robotic gait orthosis that guides the user's legs on a treadmill according to a pre-programmed physiological gait pattern. The guidance can be individually adjusted to the user's abilities and can be reduced according to the user’s improvement. The Levi dynamic body weight sys

Lokomatpro (Versions 5 & 6)

LokomatPro, versions 5 and 6, are robotic gait training systems designed for use by individuals with stroke, brain injury, cerebral palsy, spinal cord injury, or other mobility, neurological or walking disabilities. The system consists of a robotic gait orthosis that guides the user's legs on a treadmill according to a pre-programmed physiological gait pattern. The guidance can be individually adjusted to the user's abilities and can be reduced according to the user’s improvement. A dynamic body

Lumbar Extension Machine, Neck Extension Machine, Rotary Neck Machine, & Rotary Torso Machnine

Computerized exercise machines for disgnosis and treatment of back pain.

Monark Rehab Trainer (Model 881E)

The Monark 881E Rehab Trainer is an arm and leg ergometer designed for use in rehabilitation. This unit includes a control knob to adjust resistance, and a graduated scale to provide a readout in watts at a speed of 50 revolutions per minute. An electronic meter shows pedal RPM (revolutions per minute), total pedal revolutions, and time. Each pedal crank can be individually adjusted both horizontally and vertically to a measurable level. The unit has retractable casters and a retractable handle

Monark Sparr Rehab (Models 808 & 809)

The Monark Sparr Rehab is a cycle exerciser designed for exercise or rehabilitation use by seniors or individuals with physical disabilities. The unit has a low frame for easier entry and smooth pedaling with light loads. Model 808 is without a free wheel; model 809 has a free wheel. The unit has a heavy, well-balanced flywheel; speedometer and odometer; adjustable seat height; adjustable handlebar with quick release; and transport wheels. Pedal resistance is variable by turning the lever contro

Motomed Gracile

The MOTOmed Gracile is an exercise machine and continuous passive motion device designed for use by children with lower extremity or neurological disabilities or spinal cord injury (SCI). This unit is similar to a stationary bike in that it features two pedals to which the user’s feet are attached. The MOTOmed gracile provides a workout for the leg muscles in three modes: passive training with a motor; active training assisted by a motor; and active training with no assistance and adjustable res

Motomed Viva2

The MOTOmed viva2 is an exercise machine and continuous passive motion device designed for use by adults with lower extremity or neurological disabilities or spinal cord injury (SCI). This unit is similar to a stationary bike in that it features two pedals to which the user’s feet are attached. The MOTOmed viva2 provides a workout for the leg muscles in three modes: passive training with a motor; active training assisted by a motor; and active training with no assistance and adjustable resistanc

Mtl2470 Shoulder Cpm

The MTL2470 Shoulder CPM is a continuous passive motion device and shoulder exerciser designed for use in physical therapy. This unit provides passive range of motion to the shoulder in either hospital or home environment, including post-operative passive range of motion to prevent stiffness by reducing edema and muscle contracture. It can be used on either the left or right shoulder, with 180 degrees of flexion, 20 degrees of extension, internal/external rotation from 0 to 110 degrees, and syn

Nustep T4 Recumbent Cross Trainer (Model Trs4000)

The NuStep T4 Recumbent Cross Trainer, model TRS4000, is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. Designed to combine a comfortable seated position with a smooth stepping motion, this exerciser provides simultaneous upper and lower body motion to work all the major muscle groups. Its ergonomic design is intended to minimize joint stress and low back pain, and it has variable step length optio

Optiflex

OptiFlex is a continuous passive motion (CPM) device designed for use with individuals with lower extremity disabilities. This device is engineered with an extra-wide carriage to accommodate knee replacements or other knee injuries or disabilities. The unit offers progressive range of motion (ROM), an Oscillation Zone that replicates the benefits of active physical therapy protocols, a Fast Back mode that enables the knee to spend more time in working ROM by accelerating through non-working ROM,

Optiflex S

The Optiflex S is a continuous passive motion (CPM) device designed for use with individuals with upper extremity disabilities. This compact self-contained unit folds for transport and storage and features an adjustable padded seat and back. The unit offers precise, anatomical motion with natural alignment, patented simple method of changing to right or left set-up, and an ergonomic rest for the unaffected arm. The hand-held computerized control uses an OptiCard, a compact chip card that stores

Phoenix Knee Cpm (Models 1800 & 1850)

The Phoenix Knee CPM (Continuous Passive Motion), models 1800 and 1850, is a continuous passive motion device and leg exerciser designed for use by individuals with lower extremity disabilities. This lightweight, compact unit has an open carriage design with modular components. Its lift and bend motion provides an accurate range of motion, and the unit can be programmed for flexion and/or extension pause. An integrated bed mount system and foot cradle allow the unit to be used by children and sm

Pro Fitter & Pro Fitter Physio Kit

The Pro Fitter is a horizontal glider exercise device designed to increase cardiovascular endurance, improved muscle tone, and enhanced body awareness through improved balance and coordination. As part of a therapeutic or rehabilitation program, the Pro Fitter can aid in the re-development of strength and proprioception after hip, knee, and ankle injuries; improve core stability for back, shoulder, and neck injuries; and enhance motor skills, muscular strength, and endurance. This piece of equip

Pro1 Upper Body Exerciser (Models Pro100-Int & Pro102-Int)

The PRO1 Upper Body Exerciser, models PRO100-INT and PRO102-INT, is an exercise machine and arm exerciser designed for use in cardio- and cardiopulmonary rehabilitation, adaptive physical education programs, and wellness programs for seniors and people who use a wheelchair, including individuals with lower extremity or mobility disabilities or spinal cord injury. This versatile, highly adjustable upper body exerciser can be used seated or standing. It comes with a wheelchair platform and is ava

Pushon Treadmill

The PushOn Treadmill is a treadmill for wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The user can roll onto the treadmill's low profile deck using a removable ramp, and attach the wheelchair to two safety straps. Speed ranges from 0 to 15 miles per hour and grade ranges from 0 to 15%. Cadence feedback is also available on the display screen. In addition to people seated in wheelchairs, this treadmill also can be used by individua

Quadri Flex Ii Exerciser

Exerciser for disabled people to improve muscle tone and circulation of the legs and allow for complete range of motion. Arms swing out for side transfer from wheelchair. Adjustable tension seat, full back, padded seat, two safety belts for waist and chest. Velcro straps on foot supports. Rowing motion is achieved through pushing and pulling upright handlebar. Removable seat folds for storage. Portable, lightweight. DIMENSIONS: 62 x 20 x 36 inches, 21 inch seat height. WEIGHT: 45 pounds.

Quadriciser Motorized Therapy System

The Quadriciser Motorized Therapy System is a passive/isometric exercise machine designed for use by individuals with spinal cord injury or severe physical disabilities. The Quadriciser Motorized Therapy System is designed to exercise the upper and lower extremities, with timed sessions and variable speed control providing for a choice of duration and cardiovascular intensity. All four limbs are continuously moved in a coordinated, natural rhythm. The range of movement for each limb and the rate

Rex Recumbent Elliptical

The REX Recumbent Elliptical is an exercise machine designed for use in physical therapy or wellness programs. The unit is designed to be used by individuals of all ages and abilities while meeting the needs of seniors in senior centers, retirement communities, assisted living facilities, nursing homes, and long term care facilities. Its smooth, natural knee movement replicates climbing stairs to improve functional gait. The unit also provides knee-to-elbow core exercise. Exercise is bi-directio

Rickshaw Rehab Exerciser (Model 3000)

The Rickshaw Rehab Exerciser, model 3000, is an exercise machine designed for use by individuals who use manual wheelchairs. This machine builds muscle strength by duplicating the arm and shoulder motions needed for wheelchair propulsion, transfer, and pressure relief. It enables users to strengthen specific arm and shoulder muscles by facing forward or backward while seated in the wheelchair, and pumping weighted oars. The machine can be customized for an individual program by using equal weigh

Rocking Ball

The Rocking Ball is designed to help children with low muscle tone strengthen and develop their core muscles and balance. Children learn how to control and balance their bodies while sitting on a moveable disc at their own pace. SIZES: 1 size available. CAPACITY: 100 kilograms. COLOR: Red cushion, with birch wood handles and trim for base support. WARRANTY/GUARANTEE: 2 year warranty.

Sammons Preston Pulley Weight Systems (Model Pc922180, Pc922182 & Pc922184

The Sammons Preston Pulley Weight System models PC922180, PC922182, and PC922184 are pulley weights designed for use by individuals with upper extremity disabilities. Model PC2218 (chest pulley), has the handles mounted at chest height. Model PC922182 (duplex pulley), is designed to work the shoulder, elbow and chest areas, and has one pair of handles mounted at chest height, and a second mounted at floor level. Model PC922184 (triplex pulley), has three pairs of handles mounted at the floor lev

Seated Aerobics Apparatus

The Seated Aerobics Apparatus is an exercise machine designed for use by individuals with mobility disabilities. This device rests on the floor and features a sling to support the user to enable aerobic exercises in a seated position. This unit disassembles for transport and storage.

Staircase Storage Island (Model 4-8010)

The Staircase Storage Island, model 4-8010, is a training staircase designed for use in physical therapy forindividuals with balance, mobility, or walking disabilities. Made of all-hardwood plywood, this stairway has four steps with railings and a platform at the top. Each side has a storage compartment with two doors and and adjustable shelf. The steps and platform have safety tread. DIMENSIONS (LxW):56 inches x 34 inches. Each step (HxDxW) is 6 x 10 x 30 inches; platform (HxLxW) is 24 x 24 x 3

Steady Stepper

---- PROTOTYPE --------- PURPOSE: To design a safe and effective weight-bearing home workout machine for an individual with cerebral palsy. The Steady Stepper utilizes a commercial portable stair-stepper attached to a custom railing system to aid in transitioning from a wheelchair to the stair-stepper, and to provide stability while stepping. Interchangeable wooden pegs mounted to the bottom of each step allow for a varying range of motion. Weight distribution over each step, and variable foot p

SXT7000E2 Total Body Elliptical With Easy Entry

The SXT7000e2 Total Body Elliptical With Easy Entry is an exercise machine and arm and leg exerciser designed for use by seniors, people and others who need easier entry and support. This whole body cross trainer provides a natural total body movement that creates a true-to-life walking cadence. Orthopedic Bio-Flex footbeds improve circulation and eliminate hot spots and numbness. Pedal movement simulates uneven surface to recruit stabilizing muscles. Torso rotation and core muscle recruitment a

T4R Recumbent Cross Trainer

The NuStep T4r Recumbent Cross Trainer is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. This exerciser combines lower and upper body movement for a full body workout aided by an ergonomic body position design. The T4r's self-powered, belt drive has user controlled step length with power output range of 5-800 watts. The center grab ring for user's hands provides support and enhances safety. The arm

T5 Recumbent Cross Trainer

The T5 Recumbent Cross Trainer is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. This exerciser provides total body workout with a smooth and natural stepping motion combined with arm movement. The T5 is self-powered with battery and has a belt drive with generator resistance range of 5-1,400 watts. It has user controlled step length, instant free coasting start and stop action, and a low inertia s

T5Xr Recumbent Cross Trainer

The T5XR Recumbent Cross Trainer is an arm and leg exercise machine designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or arthritis. This exerciser provides total body workout with a smooth and natural stepping motion combined with arm movement. The T5 is self-powered with battery and has a belt drive with generator resistance range of 5-1,400 watts. It has user controlled step length, instant free coasting start and stop action, and a low inertia

Theracycle 200

The Theracycle 200 is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser helps provide full-body assisted range of motion exercise. The Theracycle 200 features an extra-large cushioned seat and seat back and adjustable handle bars that move forward and back as the foot pedals are moved. It has a steel frame, wide legs and lower center of gravity to promote safety and stability. The Theracycle 200 ha

Theracycle Pro

The Theracycle PRO is a powered bicycle exerciser designed for use by individuals with lower extremity or neurological disabilities. This semi-recumbent bicycle exerciser provides power- assisted range of motion exercise for legs, arms and torso. It has a steel frame, wide legs and low center of gravity that promote safety and stability. The Theracyle PRO has a large seat that swivels for easy access and egress; pedals with adjustable straps that securely hold the feet on the pedal; adjustable h

Therapacer 3000

TheraPacer 3000 is a continuous passive motion (CPM) device designed to provide customized therapy to individuals recovering from mandibular joint dysfunction. The device is anatomically correct for the mandible, and can mobilize the most acute patients after surgeries affecting the temporomadibular joint. It is transportable and supports in-home or at-work therapy with programmable start point speed and range of motion. User compliance is recorded and can be retrieved by the healthcare provider

Therapycycle

The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise and uses magnetic resistance for smooth pedal motion. The cycle includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking

Therapycyclepc

The TherapyCyclePC is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit features a digital display, hand/foot loops on the pedals, and tracking log software to enable user progress to be tracked. The unit tracks time, average and maximum speed, distance traveled, and calor

Therapytrainer

The TherapyTrainer is an arm or leg exerciser designed for use by individuals with upper or lower extremity disabilities, stroke,or cardiac disabilities. The cycle-style unit can be placed on a table for seated or standing upper extremity use or on the floor for lower extremity exercise. The unit uses magnetic resistance for smooth pedal motion and includes a set of standard and Velcro pedals. The unit features a digital display, variable resistance, hand/foot loops on the pedals, and tracking l

Total Cpm1 & Cpm2

Continuous passive motion machine. Anatomical alignment and movement. Attachments for use with hips, knees, ankles, shoulders or elbows. Flexion arc of 135 degrees for leg or 180 degrees for arm. Control Unit; single dial on microprocessor, push buttons to set and lock angle of flexion. Number of cycles and elapsed time are recorded. Hand control for user to stop or reverse any motion that causes discomfort.

Total Knee Cpm

Continuous passive motion device. Portable. Digital display enables attendant to read cycles and elapsed time of CPM therapy, and to view flexion and extension limits while unit is running. Automatic load sensing reverses motion and gives off audible alarm when an object restricts motion of the leg carriage. Microprocessor controls range of motion and diagnoses errors. Can be interfaced with an Electrical Muscle Stimulation Unit. Non-skid pad prevents unit from moving during operation. Range of

Tunturi Treadmill (Model T10)

Tunturi Treadmill, model T10, is a treadmill exerciser designed for use by individuals with lower extremity disabilities. This foldable treadmill can operate at speeds of 0.5 to 10 miles per hour, with an elevation of 0 to 12 percent. Its LED display tracks time, distance, speed, elevation, energy consumption, and heart rate. Users can choose from nine different training programs. Other features include remote controls for speed and elevation, handgrip pulse measurement, speed/elevation hotkeys,

Universal Exercise Bed (Model A)

The Universal Exercise Bed (Model A) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. Foot bars are located at the foot of the bed for sit-ups and other abdomina

Universal Exercise Bed (Model B)

The Universal Exercise Bed (Model B) is an exercise machine intended for use by people with arthritis or balance or neuromuscular disabilities that prevent them from standing or sitting while exercising. This product features a full size bed with a specially fitted fixed, 6-piece mattress and a metallic frame. At the head of the bed is an arm, chest and shoulders bar with a 120-pound weight stack for upper body strength conditioning. The sides of the upper half of the bed fold down to allow fo

Upper Body Workout Device

---- PROTOTYPE --------- PURPOSE: To create a prototype of an upper body workout device for an individual with cerebral palsy to help his upper body to gain strength and improve his range of motion. The Upper Body Workout Device consists of a steel frame with a cable and pulley system on each side, allowing him to exercise each arm individually. Forearm sleeves attach in three different positions to allow workouts targeting the biceps, triceps and deltoid muscles. Resistance is varied using free

Uppertone Gym

The Uppertone Gym is a weight exercise machine specifically designed for use by individuals who are quadriplegics. All excercises and adjustments can be done without hand grip strength; no cuffs are required. This multi-station machine targets major upper-body groups. DELTOID PRESS: This station works the shoulders and lower neck region. Resistance adjustments are made by spinning the weights to new positions. Adjustable for height and arm width. LAT PULLS: Exercises at this station work the

Versaclimber (Clinical Model, Cl-108C)

VersaClimber is a step-pedal-climb exercise machine for non-weight bearing sit down or stand up exercise for arms only, legs only, or arms and legs. It was designed for and is in use by various levels of paraplegics; leg injured individuals; brain, spinal cord injury, and stroke individuals; individuals needing cardiac rehabilitation; and persons with acute/chronic back injury/pain. The original VersaClimber is a zero impact, hydraulically resisted, vertical climbing machine that provides total

Vr Row Total Access (Model 4816/ta)

VR Row Total Access, model 4816/TA, is a rowing machine with weights designed for exercise by wheelchair users. The system features a swing- away seat for wheelchair access and dual hand grips for either wheelchair or standard seated start height. An overhead pivot matches the natural rowing action of the body, while a neutral wrist position is maintained constantly. The system has a weight stack with 200 pounds of weights in 6.2-pound increments. DIMENSIONS (HxLxW): 76 x 54 x 39 inches. WEIGHT:

Wall Pulley Unit (Model Nk 668)

The Wall Pulley Unit is a weight exercise unit designed to be used as part of an exercise program for arms and legs. The pulleys are completely adjustable from the floor to six feet high so that any desired angle or pull may be attained. The unit uses slotted disc weights (not included). The handles are removable for attachment of thigh, ankle or wrist cuffs. Two guide rods keep weights in place while the unit is in operation. Base plate is padded with rubber to decrease noise when weights are

Wheelchair Gym

The Wheelchair Gym is a progressive resistive arm exerciser designed to provide upper extremity exercise for people with mobility disabilities who use a wheelchair. Wheelchair users may access this exercise machine since a wheelchair fits within the U-shaped base, which has a rubber mat to help the wheelchair stay in place. The user grips the upper end of two arms extending from the base, moves them up and forward. The circular grips at the top of the arms can be rotated to four positions to fit

Wisb Handbike

---- PROTOTYPE --------- PURPOSE: To design a prototype of a sports bike for individuals with lower extremity or mobility disabilities, spinal cord injury and lower limb amputation. The Walking Impairment Sport Bike (WISB) is a hand-propelled bike that combines the advantages of bike and recumbent bikes into a device that is one part agile wheelchair and one part sports bike. The WISB gives users the option to toggle between “high mode” for indoor use and comfortable city driving or “low mode” f

 
Processing...


Driving Walking/Biking Public Transit  Get Directions