Tilt in Space Wheelchair

Results: 65

Acrobat

The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra

Action Trackchair (Model St)

The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair

Aktiv X8 Pediatric Tilt n Space Wheelchair

The Aktiv X8 Pediatric Tilt n Space Wheelchair is a multi-positional wheelchair designed for use by children with limited mobility as a result of cerebral palsy, stroke or muscular dystrophy. It is suitable for full-time use. This wheelchair has a folding frame and tilt feature. In addition, it is fitted with elevating leg rests and a multi adjustable headrest as standard. This wheelchair can even be disassembled for transportation in a vehicle if required. The seat width and depth can be adjust

Atigra Power Chair

Atigra Power Chair is a power wheelchair designed for use by individuals with spinal cord injuries, stroke or other neurological involvements.  The T2 seating system has been designed to provide optimal seating for the users. The power base suspension system has been designed to keep the user seated in a correct position.

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Broda Tilt Wheelchair (Model 587)

The Broda Tilt Wheelchair, model 587, is a tilt-in-space low seat wheelchair designed for indoor use by individuals with lower extremity, mobility, or balance disabilities. The front pivot seat tilt allows for proper positioning of the foot on the floor for propelling the chair while tilted. FRAME (LxW): 51 x seat width plus 10.5 inches. The frame is 16-gauge tubular powder coated steel. Anti-tippers are included. SEAT (LxW): Standard seats are 17 x 16 inches or 17 x 18 inches. Optional seat dim

C300 Corpus

The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included.

C300 Corpus Junior

The C300 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 24.25 x 39.15 inches. Minimum turning radius is 40 inches. The C300 Corpus Jr. has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, purple ice and chili pepper red. Front anti-tippers are included. CONTROLS: Integrated programmable R

C300 Ps

The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d

C350 Corpus

The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr

C350 Ps

The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti

C400 Corpus

The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra

C400 Corpus Junior

The C400 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34 x 24 x 41.5 inches. Minimum turning radius is 45 inches. The C400 Corpus Jr. has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated pr

C400 Lowrider

The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated

C400 Vs Junior

The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the

C500 Corpus

The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL

C500 Lowrider

The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Capella 45

Capella and Capella45 is a dynamic tilt-in-space wheelchair designed for individuals with mobility or neurological disabilities. The chair adjusts to redistribute the user’s body weight for optimal positioning purposes. The Capella offers 20 degrees of tilt, standard on-chair adjustment seating system, a range of seat-to-floor heights and a streamlined design.

Cheetah Wheelchair

The Cheetah Wheelchair is a child's manual wheelchair designed for use by children with lower extremity disabilities, mobility disabilities, neurological disabilities, or spinal cord injury. FRAME: Composite frame with transportation tie-downs and anti-tips in a choice of silver, blue, red, or green. SEAT (LxW): Solid seat and back with built-in, step-less adjustment from 10 x 10 inches to 16 x 16 inches. The reclining backrest offers 22 degrees of manual tilt. CUSHION: Black and gray seat and b

Chunc 45 Degree

The Chunc 45 Degree angle wheel chair is designed for use by children with limited physical mobility as a result of stroke, spinal cord injury, or muscular dystrophy.  It is designed to promote an efficient position of the pelvis and spine while providing support to the thighs, feet and head. This aids in the facilitation of cognitive, communicative and functional skills. In addition, it promotes interaction with friends, caregivers and parents.  It is suitable for indoor & outdoor use.The C

Compass Spt Wheelchair

The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to

Cruiser Ready

The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests

Etac Balder Junior

Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system

Freedom Sp3 Folding Tilt

Freedom SP3 Folding Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18

GIUDI B30 Tilt in Space Wheelchair

The Guidi B30 is a wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury.  It comes with a frame made of chromed steel, painted with non-toxic epoxy powder paint. Giudi manual wheelchair comes with wide, wrap-around, antibacterial, padded, height adjustable headrests, with vertical and front/back rotation. Giudi tilting chair has wide and retentive back which can be arranged in four positions to vary the depth of the

Gizmo Tilt-In-Space Wheelchair

The Gizmo Tilt in Space Wheelchair is a lightweight wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): Cane length of 8 to 13 inches (extra small), 10 to 15 inches (small), 13 to 18 inches (medium), or 15 to 20 inches (long) x 10 to 18 inches wide in one-inch increments. The chair is available in a choice of a folding or rigid frame with optional transport package for bus/van tie-down. The chair has 4

Growth Guidance Systems (Ggs)

Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt.

GUIDI B12 Tilt in Space Wheelchair

The Guidi B12 is a wheelchair designed indoor use only for children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It comes with a frame made of chromed steel, painted with non-toxic epoxy powder paint. Giudi manual wheelchair comes with wide, wrap-around, antibacterial, padded, height adjustable headrests, with vertical and front/back rotation.   It comes equipped with 4 swiveling 12 centimeter wheels. 

Hd3 Corpus

The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors

Impala & Impala Kit

Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up

Invacare 3G Torque Wp Rwd Power Chair

The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,

Invacare Power Tiger With Orbit Seat

The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi

Itilt2

The iTilt2 is a manual reclining tilt in space wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. It has dynamic tilt up to 47 degrees and manual recline up to 30 degrees. FRAME: 16, 18, 20, 22, or 24 inches wide. It has a tension adjustable spring tilt system with dual locking strut, care giver control lever, and tilt angle indicator. The iTilt2 has an adjustable rear axle; 0.5-inch wheel bearings; anti-tippers. SEAT: Adjustable sea

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Jewel Mps Wheelchair

The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche

K300 Ps Junior

The K300 PS Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The K300 PS Jr.has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: Integra

Kidster Chair

The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s

Kimba Pediatric Tilt-In-Space Mobility System

The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated

Koala Miniflex

The Koala Miniflex is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 28-32 x 22 inches. Minimum turning radius is 36 inches. The Koala Miniflex has a ground clearance of 2.5 inches and independent suspension. The base frame is available in xtreme yellow or chili pepper red. An optional front bumper is available. CONTROLS: Right- or left-hand mounted joystick with Pilot+ Series programmable electro

Libre Tilt

The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi

Luv Base (Model Luv-1)

Manual mobility base. Seat pan will accept a variety of seating systems. 14 by 14 inch seat pan has adjustable height of 15.5 to 19.5 inches from the floor. Gas cylinder under pan provides smooth tilt in space adjustament. Tubular steel frame. 12 inch rear wheels, 8 inch front casters. Overall length 34 inches. Overall width 25 inches. Weight of base 35 pounds. Maximum weight of user 180 pounds. Available in six colors.

M.a.c. (Multi-Adjustable Chair)

The M.A.C. (Multi-Adjustable Chair) is a tilt-in-space wheelchair designed for use by individuals with mobility disabilities. FRAME: The tubular steel frame collapses for transport. The frame is available in a choice of narrow (14 inches wide), standard (16 inches wide), or wide configurations (19 inches wide), and is offered in a choice of of 10 standard colors; one specialty color and custom colors are available at an extra cost. Push handles are standard. An expandable frame is optional. SEAT

Oasis (Kameleon) Wheelchair

The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit

Orbit Tilt-In-Space Wheelchair

The Orbit Tilt-In-Space Wheelchair is a child tilt-in-space wheelchair designed to meet a variety of positioning needs. FRAME: Modular lightweight frame designed to accommodates a child's growth. The frame expands from 10 x 10 inches to 16 x 16 inches in one-inch increments. The chair disassembles for storage and transport. SEAT: Detachable seat. The seat is interchangeable with others in the line, allowing for seats to be changed with growth or with change in need. The seat height is adjustable

Orion Ii

The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av

Outback

The Outback is a child's manual tilt-in-space wheelchair designed for use by children with mobility or severe physical disabilities. FRAME: Adjustable tilt-in-space frame with built-in growth capability. A one-piece, height-adjustable stroller handle and anti-tippers are included. The frame width adjusts from 11.5 to 15.75 inches and the base length is adjustable. The frame is available in Uluru red, Daintree green, or clear blue. SEAT: The seat depth ranges from 5.9 to 20 inches. The seat heigh

Panther

The Panther is a child's tilt-in-space wheelchair designed for children with mobility disabilities. FRAME: Polyester-coated steel frame collapses for transport and storage. The frame is available in three sizes and in a choice of bright raspberry, deep blue, or silver. Rear anti-tippers are standard. Size 1 (WxHxL) is 59 x 87 to 111 x 84 centimeters; size 2 is 62 x 87 to 111 x 92; and size 3 is 67 x 87 to 111 x 100 centimeters. SEAT: Solid seat and back with tilt in space and a low shear reclini

Prima Si (Tango) Wheelchair

The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b

Quickie Rhythm M5 Power Chair

The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in

Quickie T45

The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2

Quickie Ts

The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on th

Rodeo 12 / 14 / 16

The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment.

Safari Tilt Frame, Safari Tilt Basic, & Safari Tilt Anatomical

The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The

Samba

The Samba is an adjustable hi-low, tilt-in-space chair that offers a unique midline support system for children requiring moderate to higher levels of postural control, suitable for both home and school. The midline support system incorporates a 4 point pelvic strap that corrects the position of the pelvis. This improves alignment and helps prevent rotation and backward tilt. The modular system also eliminates the need for knee blocks. Height, width and angle adjustments can all be made easil

Sherpa Tilt-In-Space Mobility Base

The Sherpa Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair base designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 25.5 inches with backrest folded down x 19 inches without footrests (29.5 inches with footrests) x seat width + 7 inches. The powder-coated aluminum frame has a 50-degree tilt range. A built-in scale enables replication of the exact angle of tilt. Other features include height-adjustable

Skippi & Skippi Plus

The Skippi and Skippi Plus are child's powered wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury. Adjustable and designed to grow with the child, it has multiple configuration options, and it was design to have a low profile and be compact and maneuverable. FRAME (WxL): 22.4 x 27.6 (without leg rests) or 33.5 (with leg rests) inches. It has a turning radius of 21.7 inches, and the ground clearance is 66 m

Sphere Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a powered wheelchair that allows users with mobility disabilities to move, crouch, stand, or lay down all while seated and without leaving the chair. The Sphere Chair is a powered wheelchair that looks like a chair sitting on top of a ball (i.e. sphere) with two casters extending from the rear of the frame. The Sphere’s unique design allows for greater freedom of motion. Secured in the ergonomic seat, the user can switch between positi

Spree Xt

The Spree XT is a child's folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Range of 36.5 to 44 x 29.5 (without anti-tips and front rigging) x 7.5 plus seat width for 12 or 20 inch wheels and 8.75 plus seat width for 22 or 24 inch wheels (all dimensions in inches). The folding tilt-in-space frame has folding crossbraces and two-way fold-down back canes. The depth and width of the crossbraces can grow with t

Stellar

The Stellar is a manual, adjustable-tilt wheelchair designed for use by individuals with mobility disabilities. The chair offers a tilt of up to 45 degrees and hand or foot propulsion both in and out of tilt. The chair's low knee height can be maintained even when tilted. The chair is available with a standard or heavy-duty (HD) frame. FRAME (LxW): 30 to 37 without front rigging x 21.5, 25.5, 29, 30.5, 33, or 34.5 inches. Adjustable frame with dynamic tilt from zero to 45 degrees. Optional heavy

Street Corpus

The Street Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 42.25 x 24.75 inches; 32.5 x 24.75 inches (base only). The minimum dimensions for transport (HxLxW) are 31.5 x 32.5 x 24.75 inches. Minimum turning radius is 48 inches. The HD3 Corpus has a ground clearance of 2.4 inches and 4-wheel adjustable independent suspension. The base frame is available in black/gold, copper metallic and blu

X850 Corpus

The X850 Corpus is a heavy duty powered wheelchair designed for outdoor, off-road use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 49-57 x 28 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3.25 inches and 4-wheel adjustable independent suspension. The base frame is available in black onyx, crystal blue and vintage wine. Front halogen lights and rear lights are included. CONTROLS: Safegate joystic

Zippie Iris

Zippie IRIS is designed for children 4 to 16 years of age who require the benefit of tilt and a caregiver’s assistance with mobility. The Zippie IRIS rotation-in-space wheelchair is a lightweight tilt-in space wheelchair. It offers 55 degrees of Rotation-in-Space Technology. The IRIS is able to grow as the child grows. Adjust the depth and center-of-gravity without replacing any parts. Additional special features include a 40 degree or 55 degree tilt range option to accommodate various posi

Zippie Ts

The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel

Parent Category: Powered Wheelchairs
 
Processing...


Driving Walking/Biking Public Transit  Get Directions