Other Bed Aids

Results: 123

Ableware Ablerise Bed Rail

ABLEWARE AbleRise Bed Rails are side rails designed to provide support for individuals with mobility disabilities as they enter and exit the bed. Available in a single model and a double model, the base of these rails installs between the mattress and the box springs. The rails are height adjustable and feature storage pockets. DIMENSIONS: The rails are 20 inches wide. The space between the handles on the double model adjusts from 7 to 17 inches. The unit extends 39.25 inches under the mattress

Access Stairs

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted set of stairs to access a bed for a child with cerebral palsy, developmental delay, and vision and hearing impairment. The child required a raised bed with side railings to keep her safe at night, but it had to be easily accessible without caregivers having to bend over when caring for the child. The bed is 880 millimeters above the floor and has fixed railings on three sides; the railing on the fourth side slides up and do

Adaptor Air Spring Padding

Adjustable pre-inflated air cushioning interface for use on any surface to enhance soft tissue protection and provide shock absorption. Self contained sealed air cells may be cut apart in sections to fit flat or contoured surfaces where shock, impact absorption, shear or friction protection is required. Flame resistant. Neoprene rubber. Washable with soap and water. 10 by 14 inch sections with grid of 70 one inch square cells. .

Adjustable Bed Rails

The Adjustable Bed Rails are side rails designed to keep individuals with physical disabilities from falling out of bed or individuals with cognitive disabilities from leaving bed without assistance. The rails can also aid the individual in turning in bed. Available singly or in pairs, the rails have three steel tube bars and the base fits between the mattress and box spring or bed frame. The units disassemble to lie flat for transport or storage. DIMENSIONS: The tube rails are one inch in diame

Aerodyne Pt 1100

The AeroDyne PT 1100 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This alternating pressure mattress system delivers pressure relief with 288 cycle changes per day. The pressure monitoring system uses pressure sensors, which monitor the user's movement and adjusts air pressure within the mattress to ensure maximum pressure relief. WARRANTY: One year warranty.

Anti Decubitus Mattress Pad With Anchoring Hitch.

The Anti Decubitus Mattress Pad with Anchoring Hitch is a polymer floation mattress surface. The pad has an attachment system that allows it to be secured in its position on the bed. The hitch attaches to the bedframe at the head with Velcro straps, and stays attached to bed. The pad also has a Velcro backing that attaches to the hitch that can be removed for cleaning, etc. The mattress pad is filled with AKTON, a dry viscoelastic polymer, to help reduce the incidence of pressure sores.

Australian Hi Temp Ur Medical Sheepskin

Australian Hi Temp UR Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. These select Merino sheepskins reduce pressure, skin moisture and friction. These machine-washable natural shape sheepskins have been tanned for increased urine resistance. DIMENSIONS (LxW): 40 to 42 inches x 30 to 32 inches. The pile is 30 millimeterm or 1.25 inches. COLOR: Emerald Green.

Australian Medical Sheepskin

The Australian Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. The double-chrome tanned, high pile density Merino sheepskin is machine washable (up to 30 degrees Celcius). The soft, springy wool fibers of an Australian Medical Sheepkin absorb pressure from immobile limbs and joints, allow free air circulation, absorb moisture up to 34 percent of their dry weight without feeling wet, and wick the moisture away from the skin. DIMENSIONS (LxW): 42 to

Baby Lambskin Rug + Woolskin

The Baby Lambskin Rug + Woolskin is a bed and decubitus pad pad designed for use with infants and children with severe physical or neurological disabilities or spinal cord injury. These lambskins can be used in cribs, beds, strollers, and car seats. DIMENSIONS: 26 x 36 inches. The pile is 24 millimeters. COLOR: Champagne.

Battle Creek Deluxe Bedwarmer (Model 358)

The Battle Creek Deluxe Bedwarmer, model 358, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. In addition to turning the bed warmer on and off, the switch allows the user to choose between high and low temperature settings. The unit h

Battle Creek Standard Bedwarmer (Model 058)

The Battle Creek Standard BedWarmer, model 058, is a foot warmer designed for use by individuals with circulatory disabilities or other conditions that cause cold feet. This electric warming pad slips under the sheet and mattress pad. It features a large switch on the power cord that is designed for easy use by seniors and others with fine motor disabilities. The switch is lighted when the pad is on. POWER: Uses standard household current. DIMENSIONS (LxW): 36 x 18 inches. The power cord is 10 f

Bed Access Stairs

CUSTOM ADAPTATION PURPOSE: To provide safe access to a custom-built bed for a child with cerebral palsy, developmental disabilities, and vision and hearing impairments at a comfortable height for care givers. The Custom-built Child’s Bed (see also separate entry) is a standard-sized twin bed with a high wooden storage base designed to keep the child safe while providing a comfortable height for caregivers. To provide access to the bed for the child, a set of access stairs was built in two parts

Bed Access Support

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with mobility disabilities to transfer from a walker to her bed safely without assistance. The device was constructed from plywood that extended under the mattress and up the side] and a piece of 0.75 x 3 inch board that sits on the mattress top. Holes were drilled into the board to which a spare wheelchair armrest was attached. TITLE: The Bed Access Support. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/bedacc

Bed Aid For Mattress With Side Support Rail (Model 130)

The Bed Aid for Mattress with Side Support Rail, model 130, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid is designed to assist movement in bed. The large foot profile slides under mattress and the unit is counterbalanced by the bed side support rail. DIMENSIONS: The height of the side support is 509 millimeters (mm), the width of the base at the widest point is 597 mm, and the width of the support rail is 330 mm.

Bed Cane

The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o

Bed Enclosure

CUSTOM ADAPTATION PURPOSE: To provide a child with developmental disabilities with a safe sleeping environment and keep her from climbing out. The slatted base of the bed sat below the edge of te side rails. Runners were fitted to the inside of the side rails and the slatted base was raised to sit on the runners. The enclosure has independent support legs and can be unscrewed and removed if necessary. The enclosure has a wooden frame with two latched gates on each side. Sturdy, tranluscent whit

Bed Rail Padding

CUSTOM ADAPTATION PURPOSE: To prevent an individual who has Huntington’s disease from injuring herself on the rails of her hospital bed. Made of wood, the rails posed a danger to the individual as she thrashes in her sleep and because she got her arms and legs trapped between the rails. The rails were removed and covered with two layers of foam rubber tubing. The rails were then covered with velour fabric by sliding the rails into pockets on the fabric panels. The rails were then reattached to

Bed Rail Pads (Models 14-1113 & 14-1112)

Foam side rail pads, medium firm, shelterite cover, tabs with snaps at four corners. 80 inches long, 12 inches high, 1 inch thick. Available with naugahyde covers (14-1112).

Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted bed railings to protect a child with cerebral palsy, developmental delay, and vision impairment from hurting herself by climbing out of bed. The parents had purchased a bunk bed set that had a potential for modification with a solid frame and clean sides making it easy to add attachments. Matching the style of the bed, three new rails were added with the fourth side fixed to the wall. Extensions were made for the head and foo

Bed Rails

The Bed Rails are designed for use by individuals with physical or balance disabilities. These three-bar steel rails prevent unattended exit from bed and feature an adjustable crossbrace and cross bars that fit between the mattress and the box springs. DIMENSIONS: The crossbrace adjusts to fit bed 26 to 46 inches wide. The rails are 55.5 inches long and 17.5 inches high.

Bed Side Rail Padded Cover (Model 120)

The Bed Side Rail Pad, model 120, is a side rail pad designed to prevent bruising or entrapment. These covers are made of plasticized mesh and are padded for comfort. The covers are equipped with a reinforced hole to accommodate tubes or wires.

Bed Surround

CUSTOM ADAPTATION PURPOSE: To prevent a child with intellectual, communication, mobility, and vision disabilities from leaving the bed unattended during the night. An enclosure for the bed was built using eight plywood panels covered in fabric-covered foam. Each panel is equipped with two metal handles on the back to enable the child's parents to remove one or more when assisting the child in and out of bed or when changing sheets. Three panels fit down each side and the bed has a U-shaped pane

Bed Surround

CUSTOM ADAPTATION PURPOSE: To provide a customized adaptation to a hospital bed frame for a young adult with a rare genetic disorder. A standard hospital bed with collapsible tubular steel rails was not ideal as the consumer was in danger of injuring himself due to involuntary movements. Placing the bed flush to the floor was not ideal for caregivers because it placed them at risk for back injury. A frame and net system was designed to attach to the existing hospital bed. Four metal posts are m

Bed Surrounds

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted bed enclosure for a child with global developmental delay and autism. The child outgrew her crib and her parents fitted her new bed with bedrails to prevent her from getting out; however, the child still managed to get out in the night despite being unable to crawl or walk. Concerned about the child’s safety, the family contacted TADNSW for assistance in creating bed surrounds for the bed to help keep the child safe. Three

Bedrail Adaptations

CUSTOM ADAPTATION PURPOSE: To enable an individual with multiple sclerosis to raise and lower side rais on a home hospital-style bed independently. The rails were mounted toward the head of the bed and folded toward the foot of the bed, making it impossible for the user to raise or lower them while in bed. The rails were reversed and re-mounted toward the foot of the bed, enabling them to be opened from the top by the user. TITLE: Bathroom Assistance. JOURNAL: TAD Journal. REF: Volume 26, Numbe

Bedside Assistant

The Bedside Assistant is a side rail designed to provide a stong and steady handle to grip right at the edge of the bed for individuals who are weakened by illness or injury. Unlike bed rails, the Bedside Assistant does not need to be raised and lowered, so the user can be more independent getting in and out of their own bed. Each handle has a long legs that fit between the mattress and boxspring and stay in place by the weight of the matress and a special "anti-slip" friction material. They wor

Bunk Bed Ladder Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized bunk bed ladder for a child with Edwards Syndrome. To protect the child from injury the bottom three rungs of the bunk bed ladder needed to be screened off by putting mesh on the inside. However, this would make the child’s sister unable to use the ladder rungs safely to climb into the top bunk. A new rung unit was created which completely covers the bottom three existing rungs. The new rung unit has mesh fabric on the inside,

Bunk Bed Rails

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create customized bunk bed rails for a child with Edwards Syndrome. A side rail for the bunk was created using a steel tube frame padded with foam and covered in strong white mesh fabric and held in place by canoe clips. The rail is mounted on two brackets which fit over the frame of the bunk base, and can be easily lifted in and out of the bed. This adaptation is strong enough to avoid damage to the frame and safe for the child should she bang ag

Carex Easy-Up Bed Rail

The Carex Easy-Up Bed Rail is a side rail designed for use by individuals with mobility disabilities. Features include a two-in-one design that provides the security of a bed safety rail with the convenience of a padded bed support bar and a single-step release that can be easily raised and lowered by a caregiver. Designed for home use with a powder-coated compact frame, this bed rail fits any standard sized bed and can be assembled without the use of tools. DIMENSIONS (HxDxW): 22 x 1.50 x 41 in

Children's Bed Rail And Sports Pouch

The Children's Bed Rail and Sports Pouch is a portable side rail designed for use by children with balance, mobility, or cognitive disabilities. Made of heavy-duty, poder-coated steel, the rail has a foam grip handle that folds for storage and transport. Reversible and adjustable for use on either side of the bed, this rail secures to the bed frame and mattress with the included safety strap. The included three-pocket organizer fits over the rail to prevent entrapment and provide storage. DIMENS

Cozycare Unreal Sheepskin (Model 94076-Mn)

The Cozycare Unreal Sheepskin is a decubitus pad designed to prevent pressures sores in infants in incubators or open cribs. The pads are made of plush, thick polyester material that provides extra support and helps to evenly distribute pressure while allowing air to circulate. This pad is flame resistant, nonallergenic, and machine washable. DIMENSIONS (LxW): 17 x 20 inches.

Cushion Ease Side Rail Pads (Models 6013363, 6013365 & 6013663)

The Cushion Ease Side Rail Pads, models 6013363, 6013365 and 6013663) are side rail pads designed for use by individuals with physical disabilities. The pads' pressure relieving foam helps protect the user from hard side rails and reduces gaps between the bed-rails and mattress. Each pad has a Staph-Chek vinyl cover, and it is antimicrobial, flame- and stain-resistant and easily cleaned. The pads can be used with standard or swing-down bed rails, and they attach to the top rail using hook-and-lo

Cushion-Top Vinyl Bed Rail Pads (Models 401210, 401220, & 401230)

The Cushion-Top Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Added cushioning is provided on the top and inside of the rails. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401210 is 60 inches long, model 401220 is 72 inches long, and model 401230 is 80 inches long.

Decubitis Pad

The Decubitis Pad is made of washable Fortrel polyester pile. DIMENSIONS: 20 x 24, 24 x 30, 30 x 40, and 30 x 60 inches.

Decubitus Pad

The Decubitus Pad is made of Fortrel polyester pile and designed for either the seat or back of a wheelchair. The pad is washable. Wheelchair accessories include back/seat cover, armrest, leg support cover, and paddle pad cover.

Decubitus Pad

The Decubitus Pad is designed to allow air circulation to aid in the healing of pressure sores. This pad is made of polyester fibers for softness and resiliency. DIMENSIONS: Available in a choice of 16 x 18 inches, 24 x 30 inches, 30 x 40 inches, or 30 x 60 inches.

Decubitus Pad

Standard or heavy weight kodel pile bed pads. Washable. Sizes: 15 by 18 inches, 24 by 30 inches, 30 by 40 inches, 30 by 60 inches.

Decubitus Pad (Models 0034 & 0036)

The Decubitus Pad is designed to protect against pressure sores. The polyester pile pad is flame retardant, washable, and autoclavable. DIMENSIONS: Model 0034 is 30 x 40 inches and model 0036 is 30 x 60 inches.

Deluxe Guard Rail Pads (Models 5605, 5605W, 5606, & 5607)

Deluxe Guard Rail Pads are side rail pads designed to prevent injury from bed side rails. Designed to provide maximum cushioning and protection, these pads are made of durable, firm foam and covered with soft, soil-resistant vinyl. The pads attach wih quick-release buclkes. Model 5605W features a vinyl window that runs the length of the pad, enabling the user to see out. DIMENSIONS: Models 5605 and 5605L are 72 inches long. Model 5606 is 60 inches long and model 5607 is 43 inches long.

Diabetic Thermoskin Foot Gauntlet (Model 8*232)

The Diabetic Thermoskin Foot Gauntlet, model 8*232, is a foot warmer designed for use by individuals with circulatory disabilities or diabetes. This foot warmer helps to provide warmth to cold feet and problem areas caused by poor circulation. It has a trioxin lining, a rubberized center layer, and a mylon outer layer. The trioxon lining captures body heat and elevates the skin temperature. The rubberized safety sole and an adjustable hook-and-loop closure keep it in place. This foot warmer can

Double Bed Hand Bed Assist (Model 135)

The Double Bed Hand Assist, model 135, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular metal frame fits between the bed base and the mattress, offering a rigid handle on either side of the bed. DIMENSIONS: The width is adjustable to fit a 3-foot twin bed through a 5-foot double bed. The height of handle from mattress base is 440 millimeters (mm) and the overall length is 335 mm.

Double Medical Sheepskin (Model 105)

The Double Medical Sheepskin, model 105, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 6 x 2.5 feet average size. COLOR: Natural.

Effect 5000

The Effect 5000 is an alternating air pressure mattress surface designed to prevent pressure sores for people with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This mattress overlay is placed on the regular mattress on a bed. It comes in a single bed or hospital bed size. If placed on a king sized bed, it covers half the bed. POWER: Uses 110-volt AC. OPTIONS: 12-volt to 110-volt AC inverter for use in a van. WARRANTY: One year warranty.

Elastic Mesh Side Rail Protectors (Model 5707 & 5707H))

The Elastic Side Rail Protectors, model 5707 and 5707H, are side rail pads designed to prevent injury from entrapment in bed side rails. This product features pads for two side rails connected by a one-piece under-mattress section. Each pad covers a rail and fills the gap between the rail and the mattress. Designed to fit most healthcare facility beds, these machine-washable covers stretch to fit the rails, expand and contract during bed positioning, and allow access to control buttons. DIMENSIO

Elasto-Gel Cast & Splint Pads

The Elasto-Gel Cast & Splint Pads are orthoses liners designed to be used under casts, splints, pressure suits and garments, masks and dressings; to stabilize braces, orthotic and prosthetic devices; as padding for the prevention and treatment of decubitus ulcers; and to protect skin grafts. The pads are made from a formulated hydrogel which contains a natural skin moisturizer/conditioner. This hydrogel has properties which allow it to absorb excess perspiration from the skin and transmit it

Essential Aluminum Blanket Support (Model P2400)

The Essential Aluminum Blanket Support, model P2400, is a blanket support designed for use by individuals with lower extremity or neurological disabilities or spinal cord injury. The base of this height-adjustable frame fits under the end of the mattress, allowing the support to keep the weight of the sheet and blanket off the feet and legs. DIMENSIONS: The height adjusts to 20 inches.

Essential Full Bed Rails (Model P1400)

The Essential Full Bed Rails, model P1400, are hospital bed side rails designed for use by individuals with spinal cord injury, mobility disabilities, and emotional disabilities. These chrome-plated rails install without tools and feature a spring-loaded cross bar and telescoping side rails. OPTIONS: An adapter for Sunrise grid frame beds is available. DIMENSIONS: The cross bar adjusts from 37 to 43 inches wide and the side rails adjust from 42 to 72 inches long.

Essential Half Bed Rails (Model P1450-1)

The Essential Half Bed Rails, model P1450-1, are hospital bed side rails designed for use by individuals with spinal cord injury, mobility disabilities, and emotional disabilities. These chrome-plated rails install without tools and can be used at the top or the bottom of the bed. DIMENSIONS (LxH): 36 x 18 inches.

Ez Care Side Rails (Model Ez-110100)

The EZ Care Side Rails, model EZ-110100, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on most split spring beds. The rails are made of 1-inch diameter chrome-plated steel, and they telescope to adjust to the length of the bed.

Ez Care Side Rails (Model Ez-110110)

The EZ Care Side Rails, model EZ-110110, are heavy-duty half-length hospital or home care bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. The rails install without tools on either the head or foot of a bed. The rails are made of heavy duty chrome-plated steel.

Ez Care Side Rails (Model Ez-110200)

The EZ Care Side Rails, model EZ-110200, are hospital or home care full-length bed side rails designed for use by individuals with spinal cord injury or mobility disabilities. These rails install without tools on most conventional or adjustable beds. The rails are made of chrome-plated steel, and they expand to accommodate a king size bed.

Ez Landing Fall Mat (Models 911585 & N911590)

The EZ Landing Fall Mat is a fall mat designed to protect individuals with balance or mobility disabilities. Intended to provide protection for individuals who are at risk of falling out of bed or while entering or exiting the bed, this one-piece mat features trip-resistant beveled edges; a low profile, stable surface; and nano-silver throughout which protects the mat from stains, odor-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 1 x 68 x 30 inches or 1 x 68 x 24 inches.

Faux Sheepskin Bed Sore Cover

The Faux Sheepskin Bed Sore Cover is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers and/or incontinence. The sheepskin cover is constructed to keep air flow between the skin and sheets.

Feeter Heaters

Feeter Heaters are wool-lined booties that are designed to be worn by people with mobility disabilities and arthritis. These ankle-high booties are made of a soft fabric and lined with breathable wool to keep feet warm and dry. These booties are machine washable. SIZES: These booties are available in medium (sizes 6 to 7) and large (sizes 8 to 12).

Flexigrip (Model 6090)

FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.

Floor Cushion (Model 6020)

The Floor Cushion, model 6020, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and the non-slip bottom helps prevent slipping during use. This mat is sized to slide under the bed between the wheels when not in use. Covered in bacteriostatic vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH)

Friendly Bed System (Model Eb)

The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa

Friendly Bed System (Model Fb)

The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb

Friendly Bed System (Model Tb)

The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar

Friendly Bed System (Model Tb/hw)

The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa

Full Side Rail Cover (Model 5702)

The Full Side Rail Cover, model 5702, is a side rail pad designed to prevent injury from bed side rails. These machine-washable covers are lined with synthetic fur and attach over the top of the side rail and under the mattress. The bed rails can be raised or lowered without removing the covers and reinforced holes permit the attachment of restraints.

Gap Protectors (Model 5706)

Gap Protectors, model 5706, are side rail pads designed to provide protection from injury from bed side rails. These pads fill the gap between double side rails, while still allowing access to built-in patient controls on hospital-style beds. Made of quarter-inch plywood and covered in thick, wipe-clean vinyl, these pads attach to the rails with quick-release buckles.

Half Rails (Model 6630)

Chrome plated bed rail with two steel channel cross braces. Clamped to spring of hospital bed. Slide bushings accept two vertical tubes of each rail to guide it up and down. Single plunger on bracket releases and locks rail. Can be used with bed in all positions. Length 30 inches, fits bed widths 34 to 36 1/2 inches.

Helping Handle Bed Grab Bar

The Helping Handle Bed Grab Bar is a bed rail designed to assist individuals with physical disabilities in pulling themselves to a sitting position while in bed. The grab bar-style handle is made of heavy-duty Formica-style laminate and vinyl coated steel. It can be installs on most conventional beds, and can be taken apart for traveling. It fits mattresses less than 12 inches deep, and will elevate 4.5 inches above the mattress.

Hill-Rom Np50 Prevention Surface

The Hill-Rom NP50 Prevention Surface is a foam mattress surface and decubitis pad designed for use individuals in acute care or with severe physical disabilities or spinal cord injury. This lightweight, durable surface is constructed of high-density medical-grade foam with fluid proof nylon ticking and a vinyl base. The surface redistributes pressure to help prevent decubitis ulcers. It articulates with a frame and is reversible from head to foot. OPTIONS: Bolster/raised firm perimeter. CAPACITY

Home Bed Rails (Models 6626 & 6628)

Adjustable bed rails for standard twin, single, or double beds. Tubular crossbraces in 8 preselected widths, 36 to 69 inches. Crossbrace fits between bed spring and mattress. Welded, chrome-plated 1 inch steel rails automatically lock in raised position. Rail length 46 to 74 inches. Rail height 20 inches. Telescoping model available with spring- loaded cross brace. .

Home Style Bed Rails

The Home Style Bed Rails are side rails designed for use on the the beds of individuals with severe physical or cognitive disabilities. The rails are designed for use on standard home beds and can be raised and lowered with a push button. DIMENSIONS (HxL): 19.5 x 58.5 inches. The height above the boxsprings adjusts to 15.5 and 19.5 inches. The width adjusts from 26 to 72 inches. WEIGHT: 15 pounds.

Hospital Nursing Fleece With Elasticised Skirt

The Hospital Nursing Fleece with Elasticised Skirt is a hospital bed mattress cover designed for use by individuals at risk for pressure sores/ulcers. The pad is held in place with the attached fitted elasticized skirt. The mattress pad is hypoallergenic, non-flammable, anti-bacterial and anti-fungal for dust mite prevention. Hospital fleece provides natural insulation, keeping the individual warm in winter and cool in summer. DIMENSIONS(LxW): 80 x 35 inches.

Invarail (Model 6625)

Chrome plated telescoping side rails for hospital bed with flat channel cross braces. Adjustable width for universal attachment to any hospital bed spring 34 to 36 1/2 inches. Rails telescope from 74 to 47 inches in length. Easy to install.

Kodel-Bed And Chair Pads (Models 6075, 6076, & 6077)

Kodel-Bed and Chair Pads are decubitus pads designed to reduce friction for individuals who spend much of their time in bed. The Kodel pad allows for even distribution of pressure, permits air circulation and free drainage. It requires no special handling when cleaning and may be autoclaved or machine washed. The pad is stain resistant, flame resistant, non-allergenic and will not support bacterial growth. DIMENSIONS: 15 x 15 inches (6075); 30 x 40 inches (6076); 30 x 60 inches (6077).

Machine Washable Sheepskin Bed Pad

The Machine Washable Sheepskin Bed Pad is designed for use by individuals who are at risk for pressure sores/ulcers. This dense pile pad can be used in a bed or chair where the 30-millimeter pile aids in reducing pressure on pressure points. Sleep directly on the wool for maximum benefit. Elastic straps hold the pad in place, but can be cut off if they are not needed. DIMENSIONS: The pad is 24 X 36 inches.

Machine Washable Sheepskin Wheelchair Pad

The Machine Washable Sheepskin Wheelchair Pad is a decubitus pad designed for use by individuals at risk for pressure sores. Designed to cover the entire wheelchair (seat and back), it is made of dense pile to reduce pressure on pressure points. Elastic straps hold the Seat Pad firmly in place. DIMENSIONS: 18 X 36 inches.

Machine Washable Sheepskin Wheelchair Seat Pad

The Machine Washable Sheepskin Wheelchair Seat Pad is a decubitus pad designed for use by individuals who are at risk for pressure sores/ulcers.Made of dense pile, this pad reduces pressure on pressure points and is equipped witrh elastic straps keep it in place on the chair or cushion. This seat pad is machine-washable using the Gentle or Wool cycle and Woolskin. DIMENSIONS: 17 x 18 inches.

Mattress Straps

CUSTOM ADAPTATION PURPOSE: To prevent a plastic-covered mattress from sliding off a home hospital-style bed. The hospital bed has a plastic-covered mattress on top of the main mattress. The plastic cover caused the mattress to slide off the bed while the user was in bed. Long belts were made out of seat belt webbing and buckles were attached to each end. The belts were then bolted to the underside of the bed. When buckled over the mattress, the belts hold the mattress in place and prevent it fr

Medical Sheepskin

Medical Sheepskins are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These tanned natural sheepskins are washable and can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS: The average size is 9 square feet and the wool length is 0.75 inch long. COLOR: Natural.

Medical Sheepskin (Model 101)

The Medical Sheepskin, model 101, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 3 x 2.5 feet average size. COLOR: Natural.

Metal Bed Support Rail / Handle (Model 122)

The Metal Bed Support Rail/Handle, model 122, is a grab bar for bed designed for use by individuals with mobility or balance disabilities. This tubular aid has a fixed nylon coated supporting bar and an adjustable plastic coated supporting bar. The base fits between the bed base and the mattress. DIMENSIONS: The height of the unit adjusts from 490 to 645 millimeters (mm), the width of the base at the widest point is 590 mm, and the width of the support rail is 310 mm. The overall length is 700 m

Mobile Base For Sleep System

CUSTOM ADAPTATION PURPOSE: To provide mobility for a Dreama Sleep System used by a child with leukodystrophy and severe scoliosis. For comfort and to slow the development of the scoliosis, the child spends most of his time lying on his side. However, doing so in the bed meant he was isolated from household activities. To make the bed mobile, a frame was constructed of square tubular steel with a plywood base attached to the underside. Attaching the base to the underside of the frame enabled th

Mor-Loc Kodel Bed Pads (Models 60-140, 60-150 & 60-160)

Mor-Loc Kodel Bed Pads are decubitus pads designed to provide comfort and prevent bed sores for individuals who are bed ridden. They are made with fire retardent allergy-proof Kodel synthetic pile. DIMENSIONS: Available in pads measuring 24 x 30 inches, 30 x 40 inches, and 30 x 60 inches.

Outta Bed

Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure or CPAP machine more easily. Compatible with all SoClean models of CPAP machines. Connects a Philips Respironics heated hose and connects to the SoClean in order to sanitize the hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item i

Phillips Respironics Heated Hose Adaptor For Soclean

The Philips Respironics Heated Hose Adapter for the SoClean is designed for use by individuals that have a respiratory disability or condition, so that those individuals may clean the hose of a Continuous Positive Air Pressure machine more easily. Compatible with all SoClean models. Connects a Philips Respironics heated hose to connect to the SoClean to sanitize their hose. Includes: 1 Philips Respironics Heated Hose Adapter. Due to hygiene purposes, this item is non-returnable. Shipping and Han

Polyester Bed Pads (Models D2001, D2002, D2003, & D2004)

The Polyester Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Made of Kodel polyester, these pads are soft and resillient and non-allergenic. The pads are machine washable and dryable. DIMENSIONS: Model D2001 is 24 x 30 inches, model D2002 is 30 x 40 inches, model D2003 is 30 x 60 inches, and model D2004 is 36 x 72 inches.

Posey Comfort Pad (Models 6324, 6340 & 6360)

The Posey Comfort Pad, models 6324, 6340 and 6360, is a decubitus pad designed for use by individuals at risk for pressure sores. This decubitus pad is made of synthetic fur and is machine washable. Standard or lightweight available. DIMENSIONS: 24 x 30 inches (model 6324); 30 x 40 inches (6340); 30 x 60 inches (6360).

Posey Soft Split Side Rail Protectors (Models 5705 & 5705Ls)

The Posey Soft Split Side Rail Protectors, models 5705 and 5705LS, are side rail pads designed to provide protection from injury from bed side rails. These pads provide protection and can be used to close the gap between the half rails to deter users from exiting the bed between the rails. These foam pads are covered in wipe-clean vinyl and secure to most rails with the attached hook and loop straps. Available in an open bar side rail design (model 5705) and encapsulated side rail design (5705LS

Pressure Care Assistant

The Pressure Care Assistant is a decubitus pad designed for use by individuals at risk for pressure sores/ulcers. Made of Australian HiTemp UR Medical Sheepskin, this strip is used at the base of the bed to prevent heel pressure sores. The strip has side flaps that wrap around the mattress to keep it in place. This pad provides protection while maintaining freedom of foot movement. DIMENSIONS (WxL): 12 X 26 inches.

Rolyan Synthetic Sheepskin Pad (Models 4086-01 & 4086-02)

The Rolyan Synthetic Sheepskin Pad, models 4086-01, and 4086-02, is a synthetic sheepskin bed pad designed to help prevent pressure sores. The hypo-allergenic, machine-washable pad is soft 100 per cent polyester pile. DIMENSIONS: Model 4086-01 is 24 x 30 inches and model 4086-02 is 30 x 40 inches.

Safety Padding

Safety Pads are designed for use in SleepSafe beds to prevent injury. Custom made to fit the SleepSafe bed (see entries) safety rails and/or head/foot boards, these pads are made of high- density, half-inch foam. They attach with industrial-strength Velcro.

Seat Cushion (Model Ha-4783)

The Seat Cushion, model HA-4783, is a foam ring seat cushion designed for use by individuals who are at risk for developing pressures sores/decubitus ulcers. This polyurethane ring-shaped foam cushion helps reduce pressure and has a washable cotton cover. DIMENSIONS (HxLxW): 70 x 400 x 340 millimeters. WEIGHT: 370 grams.

Security Pole

The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu

Security Pole & Curve Grab Bar

The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are

Sheepette Synthetic Sheepskin Bed Pads (Models D5001, D5002, D5003, & D5004)

The Sheepette Synthetic Sheepskin Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Maded of dense, heavyweight synthetic sheepskin, these pads distribute pressure evenly, allows air circulation, and help prevent skin shear. The pads are machine washable and dryable. Model D5004 has elastric securing straps on all four corners. DIMENSIONS: Model D5001 is 24 x 30 inches, model D5002 is 30 x 40 inches, model D5003 is 30 x 60 inches, and model

Sheepette Wheelchair Armrest And Seat Pads (Models D3004 & D3005)

The Sheepette Wheelchair Armrest Pad, model D3004, and Seat Pads, model D3005, are decubitus pads designed for use by individuals at risk for pressure sores or ulcers. Made of synthetic sheepskin, the seat pad is a one-piece pad that covers wheelchair back and seat to provide pressure relief. Also made of synthetic sheepskin, the armrest pads cover the armrests of the wheelchair to reduce pressure on the arms and elbows.

Sheepskin Mattress Cover (Model 104)

The Sheepskin Mattress Cover, model 104, is a hospital bed mattress cover and decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable, and it has elastic straps on the corners to attach it to a mattress. It is intended for use in hospitals and nursing homes. DIMENSIONS (LxW): 72 x 32 inches. COLOR: Natural.

Side Rail (Model 5000)

Model 5000 is a universal, adjustable side rail designed to fit most hospital beds 34 to 37 inches wide. The rails are chrome plated steel, cross brace mounted with spring clamps, and spring loaded pin locks. DIMENSIONS: The rails can be adjusted in length from 47 inches to full bed length.

Side Rail (Model 6081)

Telescoping side rails for hospital bed, length 48 to 84 inches. Cross braces attach to any bed 34 to 36 1/2 inches wide. Chrome plated steel.

Side Rail (Model 6083)

Half length side rail, 31 1/2 inches long. Attaches to any gatch type hospital bed with open spring.

Side Rail Wedges (Models 5708 & 5708S)

The Side Rail Wedges, models 5708 and 5708S, are side rail pads designed to provide protection from injury from bed side rails. These wedges may be used singly to cover or close the gap between half side rails or zipped together to provide full-length protection of double half side rails, three-quarter side rails, or full-length side rails. Three pairs can be used to cover side rails and head- and footboards. These protectors are made of soft foam and covered in vinyl that can be wiped clean. D

Smart-Rail

The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN

Soft-Fall Bedside Mat (Model 911530)

The Soft-Fall Bedside Mat, model 911530, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and it is sized to slide under the bed between the wheels when not in use. Covered in vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH): 68 x 36 x 4 inches.

Soma Safe Enclosure

The Soma Safe Enclosure is a bed enclosure designed to prevent individuals with cognitive, emotional, or behavioral disabilities from leaving the bed without the use of restraints. This freestanding unit completely surrounds any manual or electric hospital bed with a removable headboard and footboard. The ligthweight aluminum frame is padded and the enclosure side, head, and foot panels are made of soft nylon mesh, providing security while maintaining air flow and visibility. The frame telescope

Spenco Bed Pad (Model Msp05)

The Spenco Bed Pad, model 31-115, is designed for persons confined to their bed for long periods of time. The pad covers the entire bed like a thick comforter and ensures comfort by reducing pressure on key body points. The pad is cotton/polyester on one side and has waterproof sheeting on the reverse for incontinent situations.

Spenco Foot Pillow (Model 31-559)

The Spenco Foot Pillow, model 31-559, is a pair of foot warmers and protectors designed for persons with lower extremity disabilities. The slippers are constructed of thick cotton/polyester and help relieve pressure on the foot, heels and ankle, whether a person is lying in bed or sitting in a wheelchair. SIZE: One size fits all.

Spenco Seat Pillow (Model Msp09)

The Spenco Seat Pillow, model 31-351, is a decubitus pad for persons with lower mobility disabilities confined to chairs for extended periods of time. The cotton/polyester cushion can be used on any chair, seat or car sitting surface.

Spenco Wheelchair Pad (Model 31-252)

The Spenco Wheelchair Pad, model 31-252, is a decubitus pad and armrest pad for persons using wheelchairs. The cotton/polyester covering provides protection for the arms and torso. The back of the pad is covered with waterproof sheeting.

Split-Rail Vinyl Bed Rail Pads (Model 401080)

The Split-Rail Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads are designed for use on divided bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: 9 x 1 x 28 inches.

Stand-Up (Models Cka-01, Cka-02, Cka-03, Cka-04, Cka-05 & Cka-06)

The STAND-UP, models CKA-01, CKA-02, CKA-03, CKA-04, CKA-05 and CKA-06, is a standing aid and grab bar designed for use by individuals with standing, mobility or lower extremity disabilities who need assistance rising from a bed, chair or sofa. The unit has a stainless steel base with non-slip rubber edges that rests on the floor and does not require mounting to the floor, wall or ceiling. Plastic coated steel pipes with wood grain exterior finish are mounted securely on the base to form a suppo

Sturdi Sides (Models 110 & 112)

Sturdi Sides (models 110 and 112) are chrome-plated half side rails that can easily be installed with clamps. The rails have 3 height positions. Two styles are available for single, double or queen sized beds: hospital or home. An extension adapter is available for king size beds.

Superpole & Superpole Bariatric

The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a

Superpole Traveler

The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling

Synthetic Sheepskin Bed Rail Pads (Model 402010)

The Synthetic Sheepskin Bed Rail Pads, model 402010, are side rail pads designed for use with hospital bed rails. Made of health-care grade, high-pile synthetic sheepskin, these pads cover the sides and top of the rails. The launderable, hypo-alergenic pads secure at the top with heavy-duty snaps and at the bottom with ties. DIMENSIONS: 18 x 60.

The Bed-Bar

The Bed Bar is a sturdy support rail designed to help people get in and out of bed for individuals with little mobility. It can be used by anyone who has trouble rising from their bed including those recovering from surgery, people with back injuries or disabilities, people who have joint replacements, stroke, arthritis, multiple sclerosis, or Parkinson's Disease, and children requiring mobility assistance. The Bed Bar promotes a restraint free environment and allows clients to maintain independ

Thru-View Vinyl Bed Rail Pads (Models 401015 & 401045)

The Thru-View Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads feature clear vinyl plastic windows to reduce the feeling of isolation.These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401015 is 60 inches long and model 401045 is 72 inches long.

Transfer Handle, The (Models 2001, 2025, & 2025H)

The Transfer Handles are transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between the mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2025H is similar to model 2025, but is designed specifically for use with hospital-style beds

Travel Handles

Travel Handles are grab bars for bed designed for use by individuals with lower extremity, mobility, or balance disabilities. Each unit is comprised of a handle with two extensions that attach with push-in snap-buttons. The extensions slide under the mattress to hold the handle in place. Handles are made from cushioned vinyl over an aluminum core. WEIGHT: 1.5 pounds.

Uneek Bedrail System

The Uneek Bedrail System is a side rail and transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel bedrail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. This portable bedrail system is available in two models. One opens and closes like a gate, and the other one does not. Both models feature a utility board that can supp

Universal Steel Telescoping Bed Rails (Models 1960 & 1962)

Universal Steel Telescoping Bed Rails, models 1960 and 1962, are side rails designed to keep people from rolling out of bed. These rails fit any hospital bed and are easily installed without tools. The rails can be raised of lowered at either end and have an all smooth-welded construction with 7/8 inch and 1 inch strong 18-gauge tubing. OPTIONS: half length steel bed rail (1962). DIMENSIONS: the rails telescope from 3/4 to full length (50 to 76 inches). The spring-loaded cross bar adjusts from 3

Unreal Lambskin Medi-Pads & Softtouch Bed Pads

Unreal Lambskin Medi-Pads and SoftTouch Bed Pads are decubitus pads of synthetic sheepskin for pressure relief and prevention of decubitus ulcers. The pads have 3/4-inch pile, are stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resistant to packing down. The pads can be cut to any shape without unraveling. DIMENSIONS: Medi-Pads are available in 24 x 30 (Small), 30 x 40 (Medium), 30 x 60 (Large), or 35 x 80 (hospital bed) inches. SIZES: Bed Pads are avail

Unreal Lambskin Wheelchair Accessories

Unreal Lambskin Wheelchair Accessories are decubitus pads for various pressure points including the seat, back, arm and footplates. These covers are made of synthetic fleece for pressure relief and prevention of decubitus ulcers. The material consists of 3/4-inch pile and is stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resists packing down. Foot plate, arm and removable desk arm pads are sold in pairs. BACK COVER: Fits all standard adult wheelchair mo

Vinyl Bed Rail Pads (Series 4010 & 4011)

The Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS (HxTxL): Available in 15 x 1 x 60 inches, 15 x 1 x 72 inches, 15 x 1 x 80 inches, 15 x 2 x 60 inches, 15 x 2 x 72 inches, or 15 x 2 x 80 inches.

Vitalsleep

The VitalSleep is a sleeping aid and anti-snoring device designed for use by individuals with snoring disorders. This device is a flexible, comfortable, customizable mouthpiece intended to keep air passages open during sleep. Once inserted in the mouth, the VitalSleep gently holds user's the lower jaw forward, lifting the tongue out of the way, preventing the throat from constricting or collapsing. The adjustable and customizable fit of this device allows the user to breathe freely through the m

Waterproof Hospital Fleece Pads

The Waterproof Hospital Fleece Bed Pads are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These pads are made from 100 percent machine-washable lambswool knitted into a backing material to create a dense fleece. A breathable waterproof layer is bonded to the back. This fleece creates a microclimate which assists in regulating body temperature and humidity. Hospital Fleece is hypoallergenic and non-flammable. The wool is treated with an antibacterial and an ant

Wendylett

WendyLett is a sliding sheet and bed mobility aid designed for use by individuals who find it difficult to turn in bed. The central part is smooth to reduce friction, which enables users to turn or be turned by a caregiver with little force. Care recipients effortlessly slide sideways but are slowed by the anti-slip material at the sides. OPTIONS: WendyLett2Way and WendyLett4Way are drawsheets that can be placed on top of the sliding sheet to prevent sliding down in bed while turning. The drawsh

 
Processing...


Driving Walking/Biking Public Transit  Get Directions