Powered Wheelchairs

Results: 400

2 Wheelchairs Accessible 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It is a 4-seater picnic table. Has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack

The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla

4Wd Permoveh Wheelchair

---- PROTOTYPE --------- PURPOSE:The 4WD Permoveh Wheelchair or the Personal Mobility Vehicle, is a prototype for the next-generation wheelchair. The Permoveh has four wheels of the same size, and each wheel contains 32 rollers that can rotate in a perpendicular direction to the rim. The vehicle can move in any direction when the user operates a hand-held control. When the user wants to travel forward or back, the wheels alone move; when going sideways, the rollers move. When traveling diagonall

6-Seater Picnic Table- Fits 1 Wheelchair

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. Shipping cost included.

6-Seater Picnic Table- Fits 2 Wheelchairs

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

6Runner 10 (Model 888Wnlm)

The 6Runner 10, model 888WNLM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 23 x 46.4 inches. The ground clearance is 3 inches. The turning radius is 15.75 inches. The base is available in red. CONTROLS: VR2 Controller and VR2 Main Control Box. MWD: Mid-wheel drive with 0.6 horsepower. SEAT (WxDxH): 18 x 17.5 x 22 inche

6Runner 10 Deluxe (Model 858Wm)

The 6Runner 10 Deluxe, model 858WM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 30 x 22 x 38.6 inches. The ground clearance is 3 inches. The turning radius is 18 inches. The base is available in red or blue. CONTROLS: Integral VSI Joystick Controller and VSI Controller Bracket. MWD: Mid-wheel drive with 0.8 horsepower. SEAT

6Runner 10 Rehab (Model 888Wnlm-R)

The 6Runner 10 Rehab, model 888WNLM-R, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 42 x 23 x 35.5 inches. The wheelbase is 33 x 23 inches with a ground clearance of 3 inches. The turning radius is 15.75 inches. The base is available in blue. CONTROLS: Integral VSI Joystick Controller. MWD: Mid-wheel drive with 0.8 horsepower.

6Runner 14 (Model 888Wnllhd)

The 6Runner 14, model 888WNLLHD, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 26 x 49 inches. The ground clearance is 2.75 inches. The turning radius is 23.5 inches. The base is available in red. CONTROLS: Programmable VR2 Joystick Controller with adjustable speed and battery life indicator. MWD: Mid-wheel drive with 1

Ableware 706160000 Wheelchair Carry-All

The Wheelchair Carry-All is designed as backpack for the wheelchair. The wheelchair user or the caregiver can attached to the back of the wheelchair. A full-width pocket inside helps keep things in order.

Ableware 712050000 Bowling Ball Pusher

The Bowling Ball Pusher is designed for wheelchair users. Is intended for people who want to play bowling but are in a wheelchair. Four-pronged steel and aluminum guide rests gently on the alley floor while pushing the ball. Plastic caps protect the floor surface and bowling ball. Extension handle lengthens for use, shortens for transport or storage. 

Acrobat

The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra

Action Trackchair (Model Sm)

The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each sid

Action Trackchair (Model St)

The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair

Adventure

Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches

Alternately-Propelled Mechanical Wheelchair

Alternately-Propelled Mechanical Wheelchair (APMW) is a modified wheelchair that incorporates a superior braking system and eliminates complete hand-to-rail contact when moving forward. By incorporating a clutch system engaged by air cylinders, the user can apply a relatively small amount of force to travel further than a traditional wheelchair. The APMW is designed for a range of users, including children of eight years and older, people of diminished upper body capacity, and individuals seeki

Amigo Classic Fd

The Amigo Classic FD (front drive) is a 3-wheeled scooter designed primarily for indoor surfaces and outdoor use on solid, flat surfaces by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 20 x 36.5 inches. The underbody ground clearance is 2.5 inches and the turning radius is 34 inches. The painted steel frame is available in midnight black with a black deck and midnight black front cover over the front wheel and midnight black rear cover (standard) over the batte

Amigo Escort

Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off

Amigo Ext

The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38

Amigo Hd

The Amigo HD is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. It is designed for use by larger-framed individuals. FRAME (HxLxW): 39.5 x 47.8 x 24 inches. The steel frame is painted cinnamon red and has a one-piece extended platform with a 3.5-inch underbody clearance and a 38-inch turning radius and a black rear safety bumper. A basket mounted on the front of the tiller is standard. CONTROLS: EZ Tilt handle with HI/LO speed controls a

Amigo Rd

Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, pacific blue, champagne beige or midnight black, with a black rear safety bumper. A basket mounted on the front of the tiller is standard. A basket mounted on the front of the ti

Amigo Rt Express

The Amigo RT Express is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME: (HxLxW): 34.75 x 41.5 x 20.5 inches. A version with a 3-inch shorter platform is also available (see separate listing for Amigo RT Express Junior). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a 33 degree turning radius. The painted steel frame is available in champagne beige, midnight black, pacific b

Amigo Rt Express Junior

The Amigo RT Express Junior is a 3-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 33 x 38.5 x 20.5 inches. This compact scooter is designed to accommodate people up to five feet, four inches tall. A version with a 3-inch longer platform is also available (see separate listing for Amigo RT Express). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a turning radius of 33 inche

Amigo Smartmover & Smartmover Xl

The Amigo SmartMover and SmartMover XL are three-wheel scooters designed for use by visitors and employees in hospitals, museums, libraries, universities and other public spaces with lower extremity, mobility, neurological, or physical disabilities, obesity, or spinal cord injury. FRAME (HxLxW): 37 (30.5 at top of basket) x 49 (53 for SmartMover XL) x 24 inches. The steel frame features a black platform and tiller. A rear safety bumper and front and rear stability devices are standard. The turni

Amigo Travelmate

The Amigo TravelMate is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 43 x 22 x 36.5 inches. The TravelMate has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in black. The scooter disassembles or the tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. The con

Amigo Viva

The Amigo Viva is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 45 x 22.5 x 36 inches. This scooter has an underbody ground clearance of 2.25 inches and a turning radius of 35 inches. The painted steel frame is available in moss green. The tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. Controls are located on adjustable EZ

Amyseat Modular Power Seating System

The AmySEAT Modular Power Seating System is a powered reclining and/or tilt-in-space seating system designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The seating system comes with either Power Tilt, Power Recline, or both. Power Recline comes with mechanical ISR (Integrated Shear Reduction). CONTROLS: Single actuator seat controller with dual toggle switch. SEAT (LxW): 14 to 24 x 14 to 24 inches in 1-inch increments. All systems include adjustab

Arrow Microcomputer Control (Mcc) Mk Ii

The Arrow Microcomputer Control (MCC) MK II is a motor and accessory control system designed for Invacare Arrow and Arrow XT series wheelchairs. The standard system includes a joystick with indoor/outdoor, high/low, on/off, and horn toggle switches; and battery level display, mode and level indicators. Other features include a standby mode; emergency stop switch input; and proportional head control compatibility. Adjustable performance features include indoor/outdoor performance, maximum speeds,

Asl Adjustable Proximity Sensor With Mono Port (Model Asl208_M)

The ASL Adjustable Proximity Sensor with mono port, model ASL208_M, is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This "no touch" proximity switch has an adjustable "void space" range, which allows the switch to function when mounted under a surface up to a half-inch thick, thus allowing the proximity field to begin above the voided area (for example, the surface of a tray). This switch works with

Asl Fiber Optic Sensor With Mono Port (Model Asl202-M)

The ASL Fiber Optic Sensor with Mono Port, model ASL202_M, is a sensor switch designed for use by individuals with mobility, communication, or severe physical disabilities. This single function switch has an adjustable activation range from touch to 2.5 inches, with a round target area. This fiber optic switch can be programmed for either normally open (NO) or normally closed (NC) operation. In the NO mode, switch activation occurs when an object is detected in the adjusted range. In the NC mode

Asl Proximity Sensor With Mono Port (Model Asl204-M)

The ASL Proximity Sensor with Mono Port, model ASL204-M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used throu

Atigra Power Chair

Atigra Power Chair is a power wheelchair designed for use by individuals with spinal cord injuries, stroke or other neurological involvements.  The T2 seating system has been designed to provide optimal seating for the users. The power base suspension system has been designed to keep the user seated in a correct position.

Avenger 3-Wheel Scooter

The Avenger is a heavy-duty 3-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter is equipped with a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME(LxW): 51.5 x 24.6 inches. The turning radius is 42 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey color. RWD: 24-volt, 4 pole sealed rear-whe

Avenger 4-Wheel Scooter

The Avenger is a heavy-duty 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter includes a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME (LxW): 51.5 x 25 inches. The turning radius is 48.5 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey. CONTROLS: 110-amp programmable controls. RWD: 24-

B*mobile Ambassador (Model Dks500)

The B*MOBILE Ambassador, model DKS500, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. This scooter is equipped with a front basket, dual rear view mirrors, cell phone holder, and water bottle holder. FRAME (HxLxW): 37 x 47 x 25 inches. This scooter has front and rear suspension and a 43-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable reclining high-back seat has a headrest,

B*mobile Executive (Model Dks320)

The B*MOBILE Executive, model DKS320, is a three-wheeled scooter designed for multi-surface use by individuals with mobility disabilities. This scooter includes a front basket, dual rear view mirrors, and holder for a cell phone and water bottle. FRAME (HxLxW): 37 x 47 x 27 inches. This scooter has rear suspension and a 39-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable, reclining high-back seat is equipped with a full-range slidi

B*mobile President (Model Dks600)

The B*Mobile President, model DKS600, is a 4-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. Standard equipment includes a front basket, dual rear view mirrors, and a cell phone and water bottle holder. FRAME (HxLxW): 38 x 47 x 26 inches without the seat. The frame includes front and rear suspension. This scooter has a turning radius of 42 inches and can handle a maximum curb height of 4 inches. CONTROLS: Dynamic Rhino 110-amp controller. SEAT: Adj

B*mobile Sport Scooter (Model Dks200)

The B* Mobile Sport scooter, model DKS200, is a 3-wheel, lightweight, portable scooter designed for use indoors or outdoors by individuals with lower extremity or mobility disabilities. FRAME (HxLxW): 35 x 38 x 20 inches. The turning radius is 36 inches with a ground clearance of 2 inches. The frame disassembles into four parts for transport. CONTROLS: 45 amp DK CITY DS 45K. SEAT (HxW): 13 x 16 inches. This seat is contoured and has multiple height adjustments and 360-degree rotation. ARMRESTS:

B*mobile Travel Mate (Model Dks-280)

The B*Mobile Travel Mate, model DKS-280, is a four-wheeled portable scooter designed for use by individuals with mobility disabilities. This scooter includes a front basket and dual rear view mirrors. FRAME (HxLxW): 34 x 42 x 24 inches. This scooter has a turning radius of 41 inches. CONTROLS: DK CITY DS 70K 70 Amp controller. SEAT (HxLxW): 19 x 19 x 16 inches. The low-back, foldable seat is height adjustable with 360-degree seat rotation. ARMRESTS: 10-inch, flip-up arms. BRAKES: Intelligent reg

Barrett Gem

The Barrett Gem is a powered wheelchair designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 22 x 30 x 14 inches folded size; tubular steel, chronium plated. CONTROLS: Joystick - fully programmable for speed/acceleration and can be supplied with remote, chin, or attendant control capabilities. SEAT: 14 x 16 / 15 x 16 / 17 x 17 inch. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Electro-magnetic. WHEELS: 7 inch or 12.5 inch a

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Bcw Power Wheelchair (Models Bcwpr 2018, Bcwpr 2218, Bcwpr 2418 & Bcwpr 2618)

The BCW Power Wheelchair is a powered wheelchair designed for use by obese persons with mobility disabilities. FRAME (WxDxH): Model BCWPR2018 is 27.5 x 40 x 41 inches; model BCWPR2218 is 29.5 x 40 x 41 inches; model 2418 is 31.5 x 40 x 41 inches; and, model BCWPR 2618 is 33.5 x 40 x 41 inches. All models have a heavy-duty, stainless-steel rigid frame with a baked urethane finish to resist chipping, scratching, and fading. The frame comes standard in black. Red, teal, silver, and charcoal chrome

Beach Cruzr & Beach Cruzr 4 Two

The Beach Cruzr and the Beach Cruzr 4 Two are powered beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front

Bec Pak

Wheelchair add on power drive with power pack easily placed off or on a manual wheelchair. 24 volt system, two 12 volt batteries, solid state controls, automatic electronic brakes. Battery charger included. Arc of joy stick, 7/8 inches from neutral position to full speed. Pressure required to operate, 3 ounces. Proportional control , can be positioned on left or right. High or low speed gears. Battery pack weighs 47 pounds. Up to 10 miles per charge. Operates at speeds up to five miles per hour.

Big Bounder H-Frame Power Wheelchair

The Big Bounder H-Frame Power Wheelchair is a heavy duty powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated H-style TIG welded steel frame. The frame includes heavy duty 12 position adjustable suspension forks, anti-tipping wheelie wheels, sliding dual group 27 battery box with safety reflectors, and built in taillights. CONTROLS: UE1D electronic controls with 6 programs and bi-directional select swit

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Bobcat 3 Wheel Compact Scooter (Models S38600 & S38601)

The Bobcat 3 Wheel Compact Scooter, models S38600 and S38601, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 38 x 19 x 38.5 inches. The turning radius is 32.2 inches. It has front 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into four pieces for transport, and the tiller folds down for stor

Bobcat 4 Wheel Compact Scooter (Models S38650 & S38651)

The Bobcat 4 Wheel Compact Scooter, models S38650 and S38651, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 x 19 x 35.5 inches. The turning radius is 35.4 inches. It has 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into 4 pieces. The base is available in red (model S38650) and blue (S386

Bolero

Bolero is a four-wheel scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 1340 x 580 millimeters. The midsize chassis separates for transportation and is available in red or blue. A headlight and turn signal are inlcuded. RWD: Rear-wheel drive with with mechanistic free-wheel drive transmission. SEAT: Automobile style, swing-away captain's seat. ARMRESTS: Height and width adjustable flip-up armrests. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: All f

Bounder Plus H-Frame Power Wheelchair

The Bounder Plus H-Frame Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated H-style TIG welded steel frame with heavy duty 12-position adjustable suspension forks, anti-tipping wheelie wheels, built-in taillights, and sliding battery box with safety reflectors. Color frame options are available. CONTROLS: UE1D premium electronics (6 programs with bi-directional select switch). O

Brain Interface Steering System For Wheelchair

PROTOTYPEPURPOSE: To develop a hands-free wheelchair steering system through brain wave activity for persons with limited mobility. Toyota, in collaboration with other researchers in Japan, has developed one of the fastest systems for analyzing brain waves. This new technology requires only 125 milliseconds (125 thousandths of a second) to read brain waves. An individual uses the prototype system by placing a cap on his or her head that reads brain signals through an electroencephalograph (EEG)

Breath Actuator (Model 3365)

A 4-direction, multiple switch actuator used to convert varying amounts of breath suction and pressure (sip and puff) into the directional commands required by the Multimode Interface for mode selction and oepration. The Model 2422 Breath Tube Kit is used to provide a means of sending these sips and puffs to the Breath Actuator.

Breath Tube Kit (Model 2422-2)

Used for supplying sip and puff directional commands to the breath actuator. The Breath Tube Kit includes a wingaway strap clamp mount for attachment to a standard 7/8 inch diameter wheelchair/power recliner back bar. The mount permits the breath tube to be pivoted away from the user by an attendant and returned to its original position without the need to readjust the flexible breath tube.

Breez 1025

The Breez 1025 is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (HxLxW): 42.5 x 27 x 26 inches. The overall length with footrests is 50 inches. The chair has a steel platform under the seat for carrying cargo and fr

Breez 1025-G

The Breez 1025-G is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (LxW): 47.5 x 34 inches with armrests and footrests. The chair has a steel platform under the seat with 1.8 cubic feet for carrying cargo, and it has

Buggy Pioneer 5 Dlx S540/s541 Twin Front Wheel Micro

The Buggy Pioneer 5DLX S540/S541 Twin Front Wheel Micro Scooter is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and multi-function display console. FRAME (HxLxW): 32 x 39 x 20 inches. The ground clearance is 2.4 inches and the turning radius is 38 inches. This scooter disassembles for transport or storage and is available in blue and red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller an

Bugzi

Bugzi is a powered indoor chair designed for children ages one to five whose mobility has been impaired by physical and neurological disabilities. It offers a unique opportunity for pre-school children with disabilities to experience independent mobility. Bugzi is an ideal introduction to switch and joystick use. It is compact and maneuverable. Each Bugzi is tailored and adapted to the individual child’s needs, with the capacity to adjust seating and controls as he or she grows. Bugzi is a

Buzzaround 4-Wheel Scooter (Model Gb-104)

The Buzzaround 4-Wheel Scooter, model GB-104, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40.75 x 21 inches. The turning radius is 34.5 inches and the ground clearance is 1.75 inches. The frame disassembles into two parts for transport. The scooter is available in blue or red. CONTROLS: 70 amp programmable PG S-drive. RWD: 24-volt sealed transaxle rear-wheel drive. SEAT: The 360-degree swivel seat is 15 inches deep

Buzzaround Lite 3-Wheel Scooter (Model Gb-103)

The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny

Buzzaround Lite 4-Wheel Scooter (Model Gb-105)

The Buzzaround Lite 4 -wheel scooter, model GB-105, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 41.75 inches and the ground clearance is 2 inches. The frame disassembles into 4 parts for transport. The scooter comes with three sets of interchangeable shroud panels in vermillion red, arctic blue, and sahara. CONTROLS: 45 amp programmable drive. RWD: 24-volt direct current s

Buzzy

The Buzzy is an add-on power unit designed for use with a manual wheelchair. This motorized tow device provides powered mobility for shopping and recreation without requiring the user to transfer. The user wheels up to the unit, grabs the handlebar, and pushes the thumb throttle. The unit has variable speeds. The Shopping model, which is intended for use in supermarkets and other stores, has a lower top speed than the Recreation model. An on-board microprocessor allows the user to reset the top

C300 Corpus

The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included.

C300 Corpus Junior

The C300 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 24.25 x 39.15 inches. Minimum turning radius is 40 inches. The C300 Corpus Jr. has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, purple ice and chili pepper red. Front anti-tippers are included. CONTROLS: Integrated programmable R

C300 Ps

The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d

C350 Corpus

The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr

C350 Ps

The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti

C400 Corpus

The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra

C400 Corpus Junior

The C400 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34 x 24 x 41.5 inches. Minimum turning radius is 45 inches. The C400 Corpus Jr. has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated pr

C400 Lowrider

The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated

C400 Vs Junior

The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the

C500 Corpus

The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL

C500 Lowrider

The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Carrier Wheelchair

---- PROTOTYPE --------- PURPOSE: To develop a prototype robotic wheelchair which allows individuals with mobility disabilities and wheelchair users greater independence and the capacity to traverse any terrain and situation. Developed as semester project at the University of Applied Arts in the Studio Industrial Design 2 Esslinger (www.creativednaaustria.com). The CARRIER wheelchair’s frame is specifically shaped to maneuver over a commode and adapted with a “trap door” allowing the user to us

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Celebrity Xl (Model Sc4450Dx)

The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control

Chair 4 Life

---- PROTOTYPE --------- PURPOSE: To create a prototype of a modular wheelchair that "grows" with the user allowing for independence over the lifespan. Through the United Kingdom's National Health Service, the Renfrew Group developed a new type of powered wheelchair with the Department of Health, as part of the Department's Innovation Health and Wealth program. Renfrew won a government contract to design a chair which maximizes the mobility and independence of children with disabilities as they

Challenger 2000 (Models 2000, 2000E, 2000N, 2000Ne, 2000W, & 2000We)

The Challenger 2000 is a powered folding wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2000 model, this wheelchair comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 38 x 44 to 47 x 24, 26 or 28 inches. With extended footrests, the length is 40 inches. The folded dimensions (LxW) are 34 x 14.5 inches. The folding chrome-plated frame includes rear anti-tippers. CONTROLS: Integrated progr

Challenger Bp 5000 (Models 5000, 5000E, 5000N, 5000Ne, 5000W, & 5000We)

The Challenger BP 5000 is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 5000, the Challenger BP comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 39 or 41 x 24, 26, or 28 inches. The frame length without footrests is 27 inches. The turning radius with footrests is 30 inches. The rigid polyester- coated power base frame is available in midnight blue and candy apply

Challenger Bx 6000 (Models 6000, 6000E, 6000X, & 6000Xe)

The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base

Challenger Dn (Models 1450, 1450E, 1450N, 1450Ne, 1450W, And 1450We)

The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with

Challenger Dx (Models 1500, 1500E, 1500N, 1500Ne, 1500W, And 1500We)

The Challenger DX is a powered foldable wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1500, the Challenger DX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 x 23, 25, or 27 inches. Folded (LxW) the chair is 30 x 15 inches. The turning radius with footrests is 32 inches. A folding chrome-plated frame is standard; also available is a black powder-coated frame with blue c

Challenger Fx (Models 1700, 1700E, 1700N, 1700Ne, 1700W, 1700We, 1710, & 1720)

The Challenger FX is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1700, the Challenger FX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 38 x 24, 26, or 28 inches. With extended footrests, the length is 40 inches. Folded dimensions (LxW) are 31 x 15 inches. The turning radius with footrests is 18 inches. The standard frame is a folding chrome-plat

Challenger Pediatric 1000

The Challenger Pediatric 1000 is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 x 41 or 44.5 x 21.5 inches. Folding chrome-plated frame with anti-tipper. Folded dimensions (LxW) are 31 x 14 inches. CONTROLS: Integrated programmable controller. RWD: Rear wheel drive with a right angle gear motor. SEAT (LxW): 14 or 18 x 14 inches. The back height is 14.75 inches. Seat belt included. UPH

Challenger Pediatric 1200

The Challenger Pediatric 1200 is a powered wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 36 x 36 or 37 x 21 inches. Folding powder-coated frame with anti-tipper, available in sunshine yellow or jade green. Folded dimensions (LxW) are 35 x 15 inches. CONTROLS: Integrated programmable Integra joystick controller. RWD: Rear wheel drive with a direct drive motor. SEAT (LxW): 14 or 18 x

Challenger Pp (Model 5500)

The Challenger PP, model 5500, is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 35 x 43 x 25 inches. The frame length without footrests is 31 inches. The turning radius with footrests is 19.5 inches. The one-piece polyester-coated power base frame is available in midnight blue and burgundy red; the seat frame is black. Front anti-tippers are included. CONTROLS: Integrated programmable Integ

Challenger Px (Model 6500)

The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight

Challenger Recliner 2040 (Models 2040E, 2040Ne, & 2040We)

The Challenger Recliner, model 2040, is a powered folding wheelchair with a manual reclining back designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2040E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 34 x 24, 26, or 28 inches. With extended footrests, the length is 47 inches. The folded dimensions (LxW) are 34 x 15 inches. The folding chrome-

Challenger Recliner 2540 (Models 2540E & 2540Xe)

The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f

Challenger Wide (Models 2500, 2500E, 2500X, 2500Xe, 2500Yw, 2500Ye)

The Challenger Wide, model 2500, is a folding heavy-duty powered wheelchair for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2500 model, this wheelchair comes with an extra-wide seat (X) and a super extra-wide seat(Y). FRAME (HxLxW): 38 x 46 x 30, 32, or 34 inches. With elevating legrests, the length is 49 inches. The folded dimensions (LxW) are 30 x 15 inches. The folding chrome-plated frame includes rear ant

Cirrus Plus Folding Power Chair

The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 1

Classic

The Classic is a 4-wheel scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 40 x 22 x 36 inches; folded 31 x 22 x 19 inches. The seat and tiller fold for transport or storage. The Classic has an underbody ground clearance of 3.65 inches and a turning radius of 29 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: Analog battery gauge and battery indicators lig

Comet

Comet is a three-wheeled scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 250 x 130 millimeters. The scooter disassembles into four components for transport, and its front bumper serves as a carrying handle. This scooter is available in red or blue. CONTROLS: Dynamic Rhino 70 Amp speed control. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: The front tire is 200 millimeters in diameter x 50 millimeters wide and the two rear tires are 200 millimeters i

Comfort Standing Power Wheelchair (Models Ly-Esb22Sr, Ly-Esb22Dr, Ly-Esb22Ar, & Ly-Esb22Lr)

The Comfort Standing Power Wheelchair, models LY-ESB22SR, LY-ESB22DR, LY-ESB22AR and LY-ESB22LR, is a powered stand up wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Available in four sizes (HxLxW): 35 x 46.5 x 24.5 inches (small, LY-ESB22SR); 35.75 x 46.5 x 26 inches ((medium, LY-ESB22DR); 37.5 x 47.5 x 27.5 inches (large, LY-ESB22AR); or 39 x 47.5 x 29 inches ( extra large, LY-ESB22LR). The unit has a rigid steel framework

Companion 3-Wheel Scooter (Model Gc-221)

The Companion 3-Wheel Scooter, model GC-221, is a compact scooter designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, and tail light. The floor board is partially carpeted. FRAME(LxW): 41 x 23 inches. The turning radius is 30 inches and ground clearance is 3.5 inches. The scooter disassembles for transport. Color choices are vermillion red, Arctic blue, or Sahara. CONTROLS: 70-amp programmable, electronic speed contr

Companion Ii 3-Wheel Scooter (Model Gc-321)

The Companion 3-Wheel Scooter, model GC-321, is a compact, 3-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, and tail light. FRAME(LxW): 45.5 x 23.63 inches. The turning radius is 33 inches. Ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. CONTR

Companion Ii 4-Wheel Scooter (Model Gc-421)

The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.

Compass Spt Wheelchair

The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to

Cruiser Ready

The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests

Ctm 3-Wheel Economy Scooter (Model Hs-320)

The CTM 3-Wheel Economy Scooter, model HS-320, is a 3-wheeleed scooter designed for use by individuals with mobility disabilities. Standard features include a front headlight, front basket, side reflectors, and rear view mirror. FRAME (HxLxW): 37 x 43 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 33.5 inches. Available in red, silver, or blue. CONTROLS: Large control panel with key switch and thumb levers. The tiller is adjustable. SEAT: 18-inch lightweight, padded, s

Ctm 3-Wheel Road Class Scooter (Model Hs-730)

The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke

Ctm 4-Wheel Deluxe Scooter (Model Hs-686)

The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit

Ctm 4-Wheel Economy Scooter (Model Hs-360)

The CTM 4-Wheel Economy Scooter, model HS-360, is a 4-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, side reflectors, and under-seat storage. FRAME (HxLxW): 36 x 46 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 52.3 inches. Color choices are blue, silver, or red. CONTROLS: Angle-adjustable tiller with full tiller shroud with charging port, key switch, and

Ctm 4-Wheel Mid Range Scooter (Model Hs-580)

The CTM 4-Wheel Mid Range Scooter, model HS-580, is a 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, side reflectors, rear view mirror, and under-seat storage. FRAME(HxLxW): 38 x 50 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 62.6 inches. Color choices are blue, silver, or red. CONTROLS: Console with charging port, key switch, and handle bars. The till

Ctm 4-Wheel Mini Scooter (Model Hs-250)

The CTM 4-Wheeled Mini Scooter, model HS-250, is a 4-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The leg room is expandable. The ground clearance is 1.6 inches and the turning radius is 44.3 inches. This scooter is available in red or yellow and has a front bumper. CONTROLS: Foldable tiller with large control panel with key switch and handlebars. SEAT: Foldable, padded 14-inch seat. ARMRESTS

Ctm 4-Wheel Mobility Scooter (Model Hs-890)

The CTM 4-Wheel Mobility Scooter, model HS-890, is a 4-wheeled heavy-duty scooter designed for individuals with mobility disabilities to use over rugged outdoor terrain. Standard features include full light kit with directional turn signals, front basket, front and rear bumpers, headlight, rear view mirror, and under-seat storage. FRAME(HxLxW): 49.6 x 60.0 x 26.0 inches. The ground clearance is 3.4 inches and the turning radius is 66.2 inches. This scooter has front and rear suspension. Color ch

Ctm 4-Wheel Road Class Scooter (Model Hs-740)

The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port

Ctm Mid Range Scooter (Model Hs-570)

The CTM Mid Range Scooter, model HS-570, is a three-wheel powered scooter designed for use by individuals with mobility or lower extremity disabilities. FRAME (HxLxW): 39 x 49 x 24 inches. The frame has 1.9 inch ground clearance and is available in red, blue, or silver. Features include reflectors, a mirror, and a storage area. CONTROLS: On/off key switch and speed control knob. RWD: Rear-wheel drive. SEAT: 18-inch wide swivel seat with headrest. ARMRESTS: Flip-up, width-adjustable armrests. BRA

Ctm Mini Scooter (Model Hs-235)

The CTM Mini Scooter, model HS-235, is a 3-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The ground clearance is 1.6 inches and the turning radius is 35.8 inches. This scooter disassembles into two parts for travel or storage, offers expandable leg room, and has a front bumper. This scooter is available in red or yellow. CONTROLS: Large control panel with key switch on the adjustable folding t

Dalton 3 Wheel Scooter (Model Sc-S135)

The Dalton 3 Wheel Scooter, model SC-S135, is a scooter designed for use by individuals with mobility disabilities. FRAME: Red or blue ABS plastic body with a chrome steel bumper that also functions as lift handle. CONTROLS: Dynamic DL Rhino controller and adjustable-height tiller. RWD: Rear wheel drive with high torque drive train. SEAT: Padded seat with headrest. ARMRESTS: Flip-up armrests with height, width, and angle adjustments. BRAKES: Intelligent regenerative electromagnetic brakes. WHEEL

Dane Wheelchair Mover

The WheelChair Mover uses a simple hand lever design that activates secure hitching to the frame of the wheelchair. The ergonomic design of the machine allows the user to control the speed with easy and controlled throttle acceleration. With the unit securing the frame at a low center of gravity, turning the wheelchair in a circle is smooth and effortless. Compact and quiet, the Dane WheelChair Mover is the ideal device to fit within hospital rooms and halls while meeting the objectives of safe

Daytona 3 (Models S35005 & S35006)

The Daytona 3 is a three-wheeled powered scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 44.4 x 22.5 inches. This scooter disassembles into three pieces for transport. The frame is available in red (model S35005) or blue (model S35006)and includes anti- tippers and a headlight. The scooter has a 40.2- degree turning radius, a climbing angle of 8 degrees, and ground clearance of 2.5 inches. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured he

Daytona 3 Gt (Models S35005Gt & S35006Gt)

The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa

Daytona 4 (Models S45001 & S45002)

The Daytona 4 is a four-wheeleed scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 49 x 22.5 inches. The frame is available in red (model S45001) or blue (model S45002). This scooter is equipped with anti-tippers, headlights, and a large carrying basket. The scooter has a 64-inch turning radius, an 8-inch safe climbing angle, and 3-inch ground clearance, and it disassembles for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured swiv

Daytona 4 Gt (Models S4501Gt & S4502Gt)

The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers.

Dragon

The DragonFly is a powered elevating wheelchair designed for indoor or outdoor use by individuals with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick with a separate controller for the elevator. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of th

Dual Tilt In Space With Shear-Controlling Power Recline Systems

Dual Tilt in SpaceShear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt and 57 degrees of tilt or any combination in between. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard featu

Dx Compact 900 (Maxiflex)

DX Compact 900, also called Maxiflex, is a powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 87 x 62 centimeters. The chair has a 117 centimeter turning radius. CONTROLS: P&G Dynamic electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. The comfort seat is padded with a full back. ARMRESTS: Height- and width-adjustable armrests. WHEE

E-Fix Wheelchair Wheels

E-Fix Wheelchair Wheels is designed for use by individuals with limited lower extremity strength and mobility associated with spinal cord injuries, multiple sclerosis and Parkinson’s disease.  E-Fix combines safety and technology in this power add-on system for manual wheelchairs. With E-Fix installed, wheelchairs remain foldable and portable. Users can easily switch from power to manual operation with a quick turn of the wheel hubs, making it a perfect choice for traveling or any time that you

E-Motion

E-Motion is a power assist for wheelchairs designed for use by individuals with mobility disabilities. This unit can be retrofitted to most manual wheelchairs simply by replacing the existing rear push wheels with the e-motion wheels and installing a universal bracket on the wheelchair frame. The quiet brushless, gearless electric motors are located in the wheel hubs. The unit offers three different levels of power that can be selected at the touch of a button. Stage 1 offers a 30 percent power

E.fix Basic & E.fix Plus

E.fix Basic and E.fix Plus are add-on power units for manual wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. These units come as a solid insert or pneumatic drive wheel system for adult or children's manual wheelchairs. With the electric drive installed, the wheelchair remains foldable and portable. Users can switch from power to manual operation by turning the wheel hubs. The ergonomic joystick controller indicates battery capacity on a back lit liq

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

Electric Wheelchair

Electric Wheelchair is a power wheelchair designed for use by individuals with limited mobility associate with stroke, cerebral palsy or spinal cord injury.  It offers a flip back height adjustable armrests, VR2 control system and aluminum split rim rear wheels and castors.  The split rims allow the tires to be replaced easily.  The infill rear wheels and solid castors reduce the risk of punctures.  Quick release steering handle allows the joystick to be moved from front to back in seconds. The

Elite

The Elite is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 22 x 37 inches, foldable for transport or storage. The Elite has an underbody ground clearance of 3.65 inches and a turning radius of 35 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: An analog battery gauge and a battery indicator light are located at the top of the tiller bet

Escort (Model 3200)

The Escort, model 3200, is a 3-wheeled powered scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 42 x 42 to 49 inches and the turning radius is 35 inches. It is available in midnight blue or burgundy red. This scooter is equipped with 5-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control bo

Escort (Model 4300)

The Escort 4300 is a four-wheeled powered scooter designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 44 x 42 to 49 inches. The turning radius is 37 inches. this scooter is available in midnight blue or burgundy red and is equipped with five-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control box mounted on T-sh

Etac Balder Finesse

Balder Finesse is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This front-wheel drive chair has a flexible chair-lift system and can be lowered into a complete horizontal position. FRAME (LxW): 35 inches (without footrest) x 26 inches (outside drivewheel). The length with the footrest extended is 45 inches. The height under the chassis is 3 inches. FWD: Front-wheel drive. SEAT (LxWxH): 19 x 17 x 15 to 33 inches. The sea

Etac Balder Junior

Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system

Etac Balder Liberty

Balder Liberty is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 inches (without footrest) x 26 inches (outside drivewheel). The height under the chassis is 3 inches. SEAT (LxWxH): 19 x 17 x 16 to 33 inches. The seat can tilt forward 15 degrees or backward 45 degrees. ARMRESTS: Flip-up, depth regulated armrest with adjustable height and angle. WHEELS: 3-inch tires in front and 8-inch tires in rear. The axl

Ez-Shopper 8000

The EZ-Shopper 8000 is a four-wheeled scooter designed for use by retail customers with mobility, walking or lower extremity disabilities or spinal cord injury. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME (HxLxW): 38 x 55 x 26 inches. The scooter has a heavy duty 1.25-inch steel frame with shock-absorbing and dent-resistant decks. The rear deck flips up to access motor and batteries. It has a reinforced tiller column with an added bra

Falcon Powerchair

The Falcon power chair is designed for use by individuals with limited lower extremity mobility as a result of lower extremity amputation, spinal cord injury, or neurological disorders. Some of these features include the flip back height adjustable armrests, quick release steering handle so the joystick is easy to manage, quick release batteries, and curb climber. The chair also has a folding frame made of aluminum alloy for easy storage and transport. As an added option, the chair can also come

Firefly Electric Handcycle

The Firefly Attachable Electric Handcycle is designed for use by individuals with limited strength, coordination and mobility in their lower extremities as a result of a spinal cord injury, multiple sclerosis or stroke. It converts the user’s everyday chair into a motorized chair. The "Quick Dock" attachment system easily transforms the user’s chair into a hand cycle and back again by connecting and disconnecting four latches. The patent pending design ensures that the user can get on and off of

Flex Array

---- PROTOTYPE --------- PURPOSE: To create a prototype of a proportional drive head array for individuals with tetraplegia. The Flex Array is a powered wheelchair controller that is located in a headrest and activated by the movement of the user's head. It is designed to provide an easy user interface and reduce user fatigue, while its universal DB9 connector and low profile design give the user a better mobility experience. The Flex Array consists of a standard industry community board, embed

Flexmobil 600

Flexmobil 600 is a six-wheel powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. A variety of modular accessories are available. The turning radius is 96 centimeters. CONTROLS: P&G Dynamic electronics. MWD: Mid-wheel drive. SEAT (LxW): 46 x 46 centimeters. The seat has an anatomical design. The backrest height is 30 centimeters. The chair includes an electric seat lift for getting in and out of the chair. UPHO

Full Power Superstand (Model Ps-2)

The Full Power SuperStand, model PS-2, is a powered stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a powered wheelchair with a powered standing mechanism. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid frame with push handles, rear anti-tips and front anti-tips when in the standing configuration. Each Full Power SuperStand wheelchair is custo

Galileo Stair Climbing Wheelchair

Galileo Stair Climbing Wheelchair is designed for use by individuals with limited lower extremity mobility associated with spinal cord injuries, stroke, traumatic brain injury or multiple sclerosis.   Galileo Wheelchair allows the user to assume a variety of positions such as standing, reclining, being lowered to the ground as well as being elevated.  It can also assist users with entry to vehicles without requiring additional vehicle modifications.  In addition, it can be used for both indoor a

Go-Go Elite Traveller 3 Wheel Scooter (Model Sc40E)

The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver)

Go-Go Elite Traveller 4-Wheel Scooter (Model Sc44E)

The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are stand

Go-Go Ultra 3 Wheel Scooter

The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. T

Gowrings 4 In 4 Power Chair

The Gowrings 4 in 4 Power Chair is a powered reclining and elevating wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has powered rise, fall, and recline, with an extra low seat to fit under a steering wheel or a standard desk or table. FRAME (HxLxW): 115 (130 with headrest) x 102 x 61.3 centimeters. CONTROLS: Programmable joystick controls with five driving modes. RWD: Rear wheel drive. SEAT: Recaro seating system with powered rise and fall

Gyroset

---- PROTOTYPE --------- PURPOSE: To create a prototype a wireless headset wheelchair control system for individuals with severe disabilities and/or quadriplegia. Individuals who are paralyzed from the neck down have a limited number of options to control their wheelchairs (i.e., joysticks, sip and puff tubes). Márton Juhász and Now Technologies, a Hungarian firm, have developed the GyroSet, an Android tablet-powered system that allows a person to use head movements to guide a powered wheelchair

Half-Power Superstand (Model Hps-2)

The Half-Power SuperStand, model HPS-2, is a powered stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a powered wheelchair with a manual standing mechanism. The user operates the standing mechanism with a vinyl coated lever and is assisted to the standing position by two gas cylinders. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid frame with pu

Hausted Electric Powered All Purpose Chair (Model Epc-250-St)

The Hausted Electric Powered All Purpose Chair, model EPC-250-ST, is a stretcher wheelchair and transport wheelchair designed for use by individuals with mobility disabilities. This chair is designed for use in a medical setting for transport and treatment. Features include a push bar, a built-in chart holder, and accessory wells on each side. FRAME (HxLxW): 23.5 to 31.5 x 75 x 27.75 inches. CONTROLS: This chair has electric controls for height, back support, leg section, and Trendelenburg adju

Hd3 Corpus

The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors

Heartway Frontier Pf1 4 Wheel Power Scooter

The Heartway Frontier PF1 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. Rear anti-tippers are standard.C ONTROLS: Dynamic Rhino 110-amp controller with multi-function ajustable tiller and handle bars. SEAT: 18- to 22-inch swivel captain's seat. UPHOLSTERY: Contoured, padded vinyl seat. ARMRESTS

Heartway Frontier Pf1S 4 Wheel Power Scooter

The Heartway Frontier PF1S 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and a rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. The scooter is equipped with a rear anti-tipper wheel and it disassembles for transport or storage. CONTROLS: Dynamic Rhino 110-amp, multi-function display, adjustable tiller, and handle bars. SEAT: 18- to 22-inch rotati

Heartway Gypsy 3 Wheel Power Scooter (Model P33)

The Heartway Gypsy P38 Travel Scooter is a three-wheeled scooter designed for individuals with mobility disabilities. A front basket is included. FRAME (LxW): 41.7 x 21.3 inches. The chasis is made of aircraft aluminum and folds for transport. This scooter is available in yellow. CONTROLS: Dynamic Rhino 70-amp controller. SEAT: 16- to 18-inch fold down seat. UPHOLSTERY: Vinyl. ARMRESTS: Height- and width- adjustable flip-up armrests are standard. WHEELS: 8-inch front and rear flat-free tires. PO

Heartway Mirage 4 Wheel Power Scooter (Model Pf6)

The Heartway Mirage 4 wheel Power Scooter, model PF6, is designed for indoor and outdoor use by individuals with mobility disabilities and seniors. A front basket and anti-tippers are standard. FRAME (LxW): 48 x 24 inches. This scooter disassembles for transport or storage. Color choices are blue, red, or yellow. CONTROLS: Dynamic Rhino 70-amp controller and adjustable tiller. SEAT: 18-inch, height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Ele

Heartway Mystere 4 Wheel Power Scooter (Model Pf5)

The Heartway Mystere 4-Wheel Power Scooter, model PF5, is a four-wheeled heavy-duty scooter designed for use by individuals with mobility disabilities and seniors. Standard features include a front basket, headlight, and rear view mirror. FRAME (LxW): 56.7 x 24.8 inches. CONTROLS: Rhino 110 amp comtroller with adjustable-angle tiller and digital controls. SEAT: 18- to 22-inch highback captain's seat with headrest. The seat has dual direction and rotation capability. UPHOLSTERY: Contoured, padde

Heartway Nomad 4 Wheel Power Scooter

The Heartway Nomad 4 wheel power scooter is designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 45 x 24 inches. This scooter disassembles for transport or storage. Color choices are red or yellow. CONTROLS: Dynamic Rhino 70-Amp controller and adjustable tiller. SEAT: 18-inch height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic braking. WHEELS: 9-inch front and 10-inch r

Hoveround Mpv5

The Hoveround MPV5 is a powered wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to have a very narrow turning radius and to be highly maneuverable in indoor and outdoor environments, this powered wheelchair has a unique Round for a Reason design with a round base and rear wheel steering that allows navigation around tight corners and through narrow spaces without damaging walls or furniture. FRAME: The circular base is 24

Hurricane (Model Pmv5001)

The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo

Hybrid Scooter

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a scooter user with longer-distance mobility. Billy Bowers configured a transmission and engine to be added to his electric scooter, creating a hybrid gasoline/electric scooter to eable him to take his scooter on longer trips without fear of having the batteries be depleted away from a source for recharging. It can hold half a tank of gas and travel for 50 to 100 miles without refueling or charging. The hybrid scooter has a top speed of 15 miles per h

I-Transport

---- PROTOTYPE --------- PURPOSE: To create a prototype of a powered wheelchair that allows individuals with mobility disabilities to transition from a sitting to a standing position. Researchers at National Cheng Kung University in Taiwan have developed a battery-powered, joystick-controlled wheelchair that transitions from a sitting to a standing position with a push of a button. Additionally, the device has sensors built in that monitor blood pressure and respiration of the user. The i-Transp

Image Mid Wheel Drive Wheelchair

The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-

Impala & Impala Kit

Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up

Independent Wheelchair Assistant (IWA)

---- PROTOTYPE --------- PURPOSE: To design a prototype of an electric power assist unit for a manual wheelchair for individuals with lower extremity or mobility disabilities or spinal cord injury so they can independently access their local communities safely and easily. The Independent Wheelchair Assistant (IWA) design utilizes the user’s own wheelchair, acting as a true assistant and eliminating the need to constantly transfer between other devices like scooters or power chairs. The user atta

Invacare 3G Ranger X Rwd

The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches.

Invacare 3G Torque Wp Rwd Power Chair

The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,

Invacare Action P7E

The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro

Invacare Excel Front Wheel Drive

The Invacare Excel Front Wheel Drive is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame folds to 14 inches wide including the joystick. Open, the chair is 26.25 inches wide x 32.5 to 39 inches long x 34 to 38.5 inches high. The full turning radius is less than 26 inches. Ground clearance is four inches. CONTROLS: Mark IV sized- and styled-joystick with programmable throw is permanently attached. This chair includes Action Virtual Service tha

Invacare Excel Front Wheel Drive With Captain Seat

The Invacare Excel Front Wheel Drive with Captain Seat is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME:This chair disassembles and folds for transport. Open, the chair is 24.75 inches wide x 43.5 inches deep x 35 to 39 inches high. The full turning radius is less than 25 inches. Ground clearance is four inches. The shroud is available in liquid black, candy apple red, ocean blue, or emerald green. CONTROLS: Mark IV sized- and styled-joystick with progr

Invacare Lynx L-3 3-Wheel Microportable Scooter

The Invacare Lynx L-3 3-Wheel Microportable is a three-wheeled powered scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. The frame is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning strap is optional. WHEELS: 8 x 2 inch

Invacare Lynx L-4 4-Wheel Microportable Scooter

The Invacare Lynx L-4 4-Wheel Microportable is a four-wheeled power scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches and turning radius is 51.2 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. This scooter is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning stra

Invacare Power 9000

The Invacare Power 9000 is a powered wheelchair designed for use by adults with mobility disabilities. FRAME: Folding steel frame with aluminum cross braces in standard adult or low seat configurations. With the joystick, this chair is 21.75 to 27.75 inches wide when open in the adult model and 23.75 to 27.75 inches wide when open in the low seat model. With the joystick, both models are 14.5 inches wide folded. The adult model is 35.25 to 39.25 inches high and the low seat model is 33.25 to 37.

Invacare Power Tiger With Orbit Seat

The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi

Invacare Pronto M50 With Surestep Power Chair

The Invacare Pronto M50 with SureStep is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 34 x 24 inches with the foot board up, or 38 x 40 inches with the footboard down. This chair has a turning radius of 19.5 inches and a ground clearance of 2.6 inches. The shroud is available in deep blue pearl or candy red pearl. CONTROLS: Easy Remote programmer. MWD: The mid wheel drive allows for driving over thresholds and transi

Invacare Pronto M94 Bariatric Power Chair

The Invacare Pronto M94 Bariatric Power Chair is a heavy-duty power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 28 inches. The turning radius is 19.5 inches. The shroud is available in red, blue, or black. CONTROLS: An MKV NX80 controller is standard. An upgrade to an MKV EX controller is optional. MWD: The mid- wheel drive allows for driving over thresholds and transitions up to 2 inches high. SEAT (LxW): 16 x 18 inches. The flo

Invacare Tdx Sp Rehab Seat Power Wheelchair

The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor

Invacare Torque Sp

The Invacare Torque SP is a powered wheelchair designed for use by adults with mobility disabilities. FRAME (WxL): 24.75 x 32.25 inches. The chair is 34.25 inches high in the low configuration and 36.5 inches high in the medium configuration. The ground clearance is nearly five inches and the turning radius is 29.5 inches or less. Dynamic anti-tippers are included. CONTROLS: Mark IV RII joystick is included on the standard model and the Mark IV A joytick is standard with the weight limit upgr

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Jazzy 1113 Ats (Models 2Sp-C & 2Sp-Ss)

The Jazzy 1113 ATS, models 2SP-C and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 23 inches with a 2.5-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac suspension, a low center of gravity and a non-folding frame. It has 6-inch front anti-tips. The chair is available in viper blue, onyx black, champagne and candy apple red. CONTROLS: 5

Jazzy 1170 Xl Plus (Models 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1170 XL Plus, models 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46.25 x 30 inches with a 4-inch ground clearance and a 26.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dy

Jazzy 1420 (Models 2Hd-Ss, 2Hd-C, 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1420, models 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46 x 27.25 inches with a 4.5-inch ground clearance and a 25.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by indep

Jazzy 1650 (Models 3Ehd-Ss & 3Ehd-C)

The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red,

Jazzy 600 (Models 2S-C, 2S-Ss, 3S-C, 3S-Ss, 3Sp-Ss & 3Sp-C)

The Jazzy 600, models 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS and 3SP-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.5 inches with a 3-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in champagne, candy apple red, viper blue, black onyx, kelly green, pewter, emerald green, sapp

Jazzy 614 (Models 2S-C & 2S-Ss)

The Jazzy 614, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD):

Jazzy 614Hd (Models 2Hd-C & 2Hd-Ss)

The Jazzy 614HD, models 2HD-C and 2HD-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (Wx

Jazzy Elite 6 (Models 2S-C & 2S-Ss)

The Jazzy Elite 6, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 23.25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-li

Jazzy Freedom

The Jazzy Freedom is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT

Jazzy Select 14 (Models 14-C & 14-Ss)

The Jazzy Select 14, models 14-C and 14-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 38 x 24.75 inches (without front riggings) with a 3-inch ground clearance and a 21-inch turning radius. This wheelchair has limited suspension and a non-folding frame. The chair is available in blue and red. CONTROLS: 60 amp joystick controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The st

Jazzy Select 6

The Jazzy Select 6 is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.625 x 23.5 inches with a 2-inch ground clearance (at anti-tips) and a 20.5-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with Active-Trac suspension and an articulating rear caster beam. The chair is available in red and blue. CONTROLS: 40 amp PG GC 2 controller. MWD: Two-moto

Jazzy Select Elite

The Jazzy Select Elite is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.375 x 22.75 inches with a 1.5-inch ground clearance (at anti-tips) and a 24.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 3-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with s

Jazzy Select Hd (Models Hd-Ss & Hd-C)

The Jazzy Select HD, models HD-SS and HD-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 37.75 x 25 inches with a 2.5-inch ground clearance (at anti-tips) and a 27-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 6-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazz

Jewel Mps Wheelchair

The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche

Jimmie (Model Ul8Wpbs)

The Jimmie, model UL8WPBS, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 32 x 22.5 x 36.5 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. It has rear anti-tips. This portable chair can be dismantled into three parts for transport. The base is available in burgundy red. CONTROLS: Left- or right

Jive Up Standing Electric Wheelchair

Jive Up Standing Electric Wheelchair is designed for use by individuals with limited lower extremity mobility as a result of stroke, spinal cord injury and traumatic brain injury.  It is designed for indoor and outdoor handling on multiple terrains.  Users can press a button to move from a sitting to standing position.  The Jive Up provides 5 memory positions: transfer, relax, stand up, sitting and lie down.  These positions are accessible through the joystick or the 5-button switch box. It offe

Joystick (Model 3185)

A proportional type joystick used for mdoe selection and operation of a Dufco Multimode Interface. During wheelchair operation, this joystick provides precise control of both speed and direction. May be configured with a chin-cup for chin oeration, or a knob for hand operation.

Joystick (Model 3345)

An 8-direction, heavy duty, multiple switch actuator used for mode selection and operation of a Multimode Interface. Requires moderate operating pressure and is intended for hand operation by those with average strength.

Joystick (Model 3361)

An 8-direction, short throw, multiple switch actuator used for mode selection and oepration of a Multimode Interface. Requires moderate operating pressure and is intended for those with average strength. May be reconfigured with either a knob or chin-cup.

K300 Ps Junior

The K300 PS Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The K300 PS Jr.has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: Integra

K450 Mx

The K450 MX is a powered wheelchair designed for use by children and small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It features a powered seat-to-floor function that moves the seat forward and down from its normal height to ground level in front of the frame and back again. This function is intended to facilitate transfers or interacting with other people. FRAME (LxW): 33 x 24.5 to 28.5 inches. The minimum turn radius is 41.75 inches. The K450 MX

Katalavox

Katalavox is a voice input powered wheelchair controller that enables the user to control the movements of the chair by voice commands. Combinations of voice commands allow the wheelchair to take up to 84 driving positions including 4 forward speeds, 2 backward speeds, and 4 angles to the right or left. Commands can be given in any language.

Koala Miniflex

The Koala Miniflex is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 28-32 x 22 inches. Minimum turning radius is 36 inches. The Koala Miniflex has a ground clearance of 2.5 inches and independent suspension. The base frame is available in xtreme yellow or chili pepper red. An optional front bumper is available. CONTROLS: Right- or left-hand mounted joystick with Pilot+ Series programmable electro

Legend Xl

The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-w

Leveraged Freedom Chair (Lfc)

---- PROTOTYPE --------- PURPOSE: To create a wheelchair prototype to allow individuals with mobility in third-world countries greater mobility in and outdoors providing personal freedom. Amos Winter, a PhD candidate in mechanical engineering, along with a team of undergraduates at MIT and international design collaborators designed the Leveraged Freedom Chair (LFC). The LFC performs like a combination of a desk chair and a mountain bike "something you can comfortably sit in all day and maneuve

Libre Tilt

The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi

Lifestand Lsc

The LifeStand Compact (LSC) is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (HxLxW sitting): 100 or 110 x 98 or 110 x 67 centimeters. Rigid frame with push handles

Lifestyle Mini Traveler Supreme (Model Mt-100)

The Lifestyle Mini Traveler Supreme, model MT-100, is a lightweight three-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 35 x 21 1/8 inches. The scooter disassembles for transport or storage. The turning radius is 33 inches. Available colors are red and blue. SEAT (WxD): 16 x 16 inches. The swivel seat is height adjustable and folds down. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. WHEELS: 7-inch front and rear foam

Low Shear Power Recliner

Low shear power recliner for Invacare Arrow recliner frame or sectional frame, or Everest and Jennings recliner frame -47 or -49 and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Comes assembled, includes reclining frame, rigid back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat or back module mount, and a toggle switch to control the system. Back height of 16 inches to 25 inches in on

Luv Base (Model Luv-1)

Manual mobility base. Seat pan will accept a variety of seating systems. 14 by 14 inch seat pan has adjustable height of 15.5 to 19.5 inches from the floor. Gas cylinder under pan provides smooth tilt in space adjustament. Tubular steel frame. 12 inch rear wheels, 8 inch front casters. Overall length 34 inches. Overall width 25 inches. Weight of base 35 pounds. Maximum weight of user 180 pounds. Available in six colors.

Mart Cart Deluxe Edition (Models 02002 De & Del)

The Mart Cart Deluxe Edition, models 02002 DE and DEL, is a shopping cart scooter designed for use by individuals with mobility disabilities. This scooter can negotiate 25-inch aisles in retail stores. FRAME: 1.25 inch steel frame with basket bra, folding produce tray, and deluxe trim. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel drive with front hub motor. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12-volt, 70-amp battery. CAPACITY: 700

Mart Cart E-Se & E-Sel

Mart Cart E-SE and E-SEL are shopping cart scooters designed for use by individuals with mobility disabilities. This scooter has a large shopping basket and can negotiate 25-inch aisles. FRAME: 1.25-inch steel frame. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel hub drive. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12- volt, 70-amp battery. CAPACITY: 700 pounds (550 pounds for rider plus 150 pounds basket capacity).

Mart Cart Xti 24 Personal Shopper (Model 280-2534)

The Mart Cart XTi 24 Personal Shopper, model 280-2534, is a shopping cart scooter designed for use by individuals with mobility disabilities. This 3-wheeled scooter is designed for indoor or outdoor use on hard surfaces, including ramps with up to a three-degree incline. FRAME: Includes front anti-tip casters. CONTROLS: Available with thumb-activated wig-wag or ergonomic dual throttle controls. FWD: Front wheel drive with XTi hub motor. SEAT: Adjustable position sliding seat. BRAKES: Friction di

Mart Cart Xti-12

Mart Cart XTi-12 is a shopping cart scooter designed for use by shoppers with mobility disabilities. This electric shopping cart turns within the diameter of its rear axle, allowing a 180-degree turn in narrow store aisles. The scooter is equipped with a basket, horn, and reverse warning alarm. Signage includes "For Our Valued Customers" and "No Children in Basket." Operating instruction decals are available in Spanish, Portuguese, or French. FRAME (HxLxW): 37 x 55 x 25 inches. This scooter has

Mart Cart Xti24 Industrial

The Mart Cart XTi 24 Industrial is a scooter designed for use in commercial environments by individuals with mobility disabilities. This scooter is designed for indoor or outdoor use on hard surfaces, and can go up and down ramps. Features include a basket, anti-tip swivel casters, double insulated wiring harness, a horn, and a reverse warning alarm. FRAME (HxLxW): 37 x 55 x 25 inches. Welded chassis with rear wraparound steel bumper and fiberglass body with bright finish. The scooter comes in a

Micro Buggy

PROTOTYPE--- The Micro Buggy is an off-road wheelchair designed for use by individuals with lower extremity or mobility disabilities. This gas powered wheelchair can be used for recreation or for tasks such as walking the dog. FRAME: Adjustable suspension; automatic transmission; 3 forward gears and 1 reverse gear; 1.5 inch receiver hitch in front and rear; 8 inch suspension travel; expandable storage system that slip links storage baskets. CONTROLS: The unit is all hand controlled, with a thumb

Mini Phantom 3 Wheel Compact Scooter (Models S35001692 & S35002692)

The Mini Phantom 3 Wheel Compact Scooter is a 3-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (HxLxW): 35 x 37 x 21 inches. The turning radius is 37 inches and ground clearance is 2 inches. The frame disassembles into three pieces for transport. Anti-tippers are standard. Available colors are red (model S35001692) or blue (model S35002692). CONTROLS: PG S-Drive 45A controller with finger pull throttle. SEAT: Height- adjustable, fold-down seat. UPHO

Miniflex 500

The Miniflex 500 is a compact powered wheelchair designed for indoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. The turning radius is 120 centimeters. CONTROLS: P&G/ Dynamics. FWD: Front wheel drive. SEAT (LxW): The anatomically-shaped seat is 46 x 46 centimeters. The backrest height is 30 centimeters, and a variety of optional headrests is available. ARMRESTS: Height- and width- adjustable armrests. WHEELS: Back wheels are joint fi

Miniflex Comfort

The Miniflex Comfort is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has a 120 centimeter turning radius. FRAME (LxW): 82 x 57 centimeters. CONTROLS: P&G/Dynamics electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. An electric seat lift is standard. ARMRESTS: Height- and width-adjustable armrests. WHEELS: Back wheels are joint fixed in the chas

Mobile Internet Connected Assistant (Mica)

---- PROTOTYPE --------- PURPOSE: To develop an intelligent wheelchair that uses a remote-controlled or autonomous operation for individuals with mobility disabilities. The Mobile Internet Connected Assistant (MICA), developed by Sven Rönnbäck of Luleå University of Technology in Sweden, utilizes a built-in distance-metering sensor to discover the surfaces that are available and that the wheelchair is being used in a safe manner. Individuals with severe mobility disabilities can use the head-con

Multimode Interface (Model 3420)

Permits the use of proportional or switch actuators to operate an Everest & Jennings power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, acceleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching (continuous) whee

Multimode Interface (Model 3470)

Permits the use of proportional or switch actuators to operate a Quickie power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, accleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching ( continuous) wheelchair drive. Tw

Multimode Scanner (Model 3370) & Scanner Display (Model 2995)

The Scanner, in conjunction with a single switch actuator, is used for mode selection and operation of a Multimode Interface. The Scanner converts single switch actuator commands into the four directional commands (forward/reverse/left/right) required for system operation.

Neilson Navarette Assistive Seat

The Assistive Seat designed by Neilson is inspired by the Audi R8. It is designed for use by individuals with limited lower extremity strength, mobility and coordination as a result of cerebral palsy,  multiple sclerosis, arthritis, or traumatic brain injury. The design features three wheels, two on the side and a free-floating rear wheel used to maneuver the chair. Neilson Navarette reduced the weight by adding with low-profile tires and by adding a smaller electric engine; the lighter engine a

New Heights Electric Elevating Power Wheelchair (Models 08 02 02A-C)

The New Heights Electric Elevating Power Wheelchair, models 08 02 02A-C, is a powered elevating wheelchair designed for use by individuals with lower extremity amputations, lower extremity, mobility, and severe physical disabilities, and spinal cord injury. The wheelchair is designed as a general purpose utility wheelchair with the ability to temporarily elevate the seat from standard seated height to a height greater than that of a person standing. FRAME (HxLxW): 51 x 33 x 24 inches. CONTROLS

No Limits Trike

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted motorized power tricycle add on for manual wheelchairs for individuals with lower extremity or mobility disabilities or spinal cord industry. The No Limits Trike is a power system complete with a power drive including a wheel with 12 inch disk brakes, motor, and a 24 volt battery pack mounted on the front fork with handle bar. The trike includes a left side brake lever and right side variable speed twist throttle that can b

Nomad 3 Pt3

The Nomad 3 PT3 is a 3-wheel mobility scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. Front basket is standard and an anti-tip rear caster is included. FRAME(HxLxW): 36 x 43 x 23.5 inches. The ground clearance is 3 inches and the turning radius is 37 inches. Color choices are blue, silver or red. DRIVE: Rear wheel drive with a 450-watt motor. CONTROLS: Dynamic Rhino 70Amp controller with peed control, battery indicato

Nutron R5I Power Wheelchair

The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The

Nutron R5Ilx Power Wheelchair

The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18

Nutron R5Ilxp Power Wheelchair

The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T

Oasis (Kameleon) Wheelchair

The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit

Odyssey (Models S45200 & S45300)

The Odyssey, models S45200 and S45300, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 55.1 x 26.4 x 39.8 inches. The ground clearance is 4.5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, heavy-duty front and rear bumpers, a front large carry basket, front and rear lights with tur

Odyssey (Models S45200 & S45300)

The Odyssey is a four-wheeled powered scooter designed for use by individuals with mobility disabilities. Features include directional front and rear lights with turn signals and a large carry basket. FRAME (LxW): 51 x 26.4 inches. The turning radius is 70 degrees with 4.5 inches of ground clearance. The scooter comes with anti- tippers, full front suspension, and front and rear bumpers. The scooter is available in red (model S45200) or blue (model S45300). CONTROLS: Adjustable tiller. SEAT: Hei

Optima 2G

Optima 2G is a powered seating system designed for use by individuals with neurological or severe physical disabilities. Tilt-in-space and reclining systems are available and can be mounted on a power base (not included) from Invacare, Pride Mobility, Sunrise Medical, Leisure Lift, TracAbout, Wheelchairs of Kansas, or others. CONTROLS: Attendant controls are standard, with independent toggle switch and joystick interface controls for power base and seating system functions. Alternative input dev

Optimax

OptimaX is a bariatric seating system designed for use by individuals with neurological or severe physical disabilities. This system can be expanded in three dimensions and is available in tilt-only, recline-only, and tilt/recline configurations. FRAME (HxLxW): Back height plus 12 x seat length plus 20 x seat width plus 6 inches (tilt-only) or seat width plus 8 inches (recline only and tilt/recline). The frame has powder-coated black wrinkle finish. CONTROLS: Single post 4-position toggle switch

Optimus

Optimus is a powered wheelchair designed for use by individuals with mobility disabilities and spinal cord injury. FRAME: Total length, 123 centimeters (105 centimeters without leg support). CONTROLS: The electronic control panel has a liquid crystal display (LCD) and LED (light emitting diode) signals. Its angle can be set independently of the height-adjustable armrest, and it can be swung to the side and back so the arm can fit beneath a table edge. SEAT (LxW): 45 to 49 x 43 centimeters. The

Osprey 4410 4-Wheel Heavy Duty Scooter (Models Osprey4410Mg20Cs & Osprey4410Mg22Cs)

The Osprey 4410 4-Wheel Heavy Duty Scooter, models OSPREY4410MG20CS and OSPREY4410MG22CS, is a heavy-duty four-wheel scooter designed for outdoor use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 54 x 29 x 50 inches. The ground clearance is 7 inches, and the turning radius is 73 inches. This scooter includes a headlight, a horn, turn signals, dual rear view mirrors, a front plastic basket, and

Overlander (Model Pev 2000)

The Overlander, model PEV 2000, is a heavy-duty powered wheelchair designed for indoor and outdoor use by obese individuals with mobility disabilities. FRAME: Heavy-duty suspension frame. CONTROLS: Programmable micro-controller with right- or left-mounted joystick. RWD: Non-slip interlocking rear belt drive. SEAT: No seating system is standard. A solid seat with foam or a solid seat frame are optional. The seat is available in widths ranging from 18 to 28 inches. UPHOLSTERY: Stain-resistant sul

P.a.w.s. Wheelchair

The P.A.W.S. Wheelchair is a prototype all-terrain powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This six-wheel drive wheelchair has parallel all wheel steering (PAWS), which allows it to travel on sand or rough trails and up steep grades, and also to navigate tight office space and public facilities. The seat and all of the wheels share a common linkage that allows them to rotate relative to the frame while remaining parallel to one another. FR

Pacesaver Eclipse Premier

The Pacesaver Eclipse Premier is a four-wheeled scooter designed primarily for outdoor use by individuals with mobility disabilities. FRAME (LxW): Overall, the scooter is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The wheelbase is 36.25 inches. The scooter disassembles for transport. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls are standard. The control box includes a battery-level ind

Pacesaver Espree Premier 9-Inch & 10-Inch

The Pacesaver Espree Premier 9-Inch and 10-Inch are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius on the 9-inch model. The 10-inch model is 45 x 24 or 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space

Pacesaver Espree Titan

The Pacesaver Espree Titan is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius.The wheelbase is 33.5 inches. The scooter disassembles for transport. A stretch frame is optional. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a

Pacesaver Fusion250 & Pacesaver Fusion350

The PaceSaver Fusion250 and Fusion350 are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 22 inches (Fusion250) or 45.5 x 23.5 inches (Fusion350), and both models have a 2-inch ground clearance. The turning radius is 29.5 inches for both models. The scooters disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. T

Pacesaver Fusion450 & Pacesaver Fusion500

The PaceSaver Fusion450 and Fusion500 are three-wheeled scooters designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches, and both models have a 2-inch ground clearance. The turning radius is 33.25 inches for both models. Both models disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a battery-level in

Pacesaver Plus Iii Jr. 9-Inch And 10-Inch

The PaceSaver Plus III Jr. is a three-wheeled scooter designed for indoor or outdoor by individuals with mobility disabilities. FRAME (LxW): 42 x 24 (10-inch) or 23 inches (9-inch) with a 4.5-inch (10-inch) or 4-inch (9-inch) ground clearance and a 32-inch turning radius. The wheel base is 30 inches. The scooter disassembles for transport. It is available in candy apple red. CONTROLS: This scooter features a dual moisture protected Snag Guard throttle and 110 amp power boost battery saver contr

Pacesaver Plus Iii Premier 9-Inch & 10-Inch

The PaceSaver Plus III Premier is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): The 9-inch model is 45.5 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius. The wheelbase is 33.5 inches. The 10-inch model is 45 x 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. This scooter is available in ocean blue, midnight black, or cand

Pacesaver Plus Iii Titan

The PaceSaver Plus III Titan is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The contro

Pacesaver Scout

The PaceSaver Scout is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 39 to 41 x 39 x 25 inches. The overall height is 31 to 33 inches with the seat back folded down. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout includes front anti-tippers and features independent coil spring suspension. The seat frame

Pacesaver Scout Boss 4.5 Cc / Ss

The PaceSaver Scout BOSS 4.5 CC/SS is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 x 44 x 25.5 inches. The turning radius is 24.4 inches, and the maximum curb height climbed is 2.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. This chair features a heavy-duty steel frame with independent coil-spring suspension and includes height-

Pacesaver Scout Boss 6 & 6.75

The PaceSaver Scout BOSS 6 and 6.75 are heavy-duty powered wheelchairs designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28. x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. These chairs disassemble for transport. Both chairs feature a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippe

Pacesaver Scout M Series (Models M1 & M1-350)

The PaceSaver Scout M series is a rigid heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models convert from a front-wheel drive (FWD) to a rear-wheel drive (RWD)wheelchair by selecting a switch. FRAME (HxLxW): In font wheel drive, the chair 38 to 40 (model M1) or 38.75 to 40.75 (model M1-350) x 38.75 with FWD or 38.25 with RWD x 24 inches. The height with the seat back down

Pacesaver Scout Rf-P3 & Rf-P4

The PaceSaver Scout RF-P3 and RF-P4 are rigid heavy-duty powered wheelchairs designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 with Admiral's seat back folded down x 40.5 x 25 inches. 24.5 to 27.5 with the Com-For-Back seat folded down x 40.5 x 25 inches. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout RF-P3 and RF–P4 include front anti-t

Palmer Independence (Model 24)

The Palmer Independence, model 24, is a powered three-wheeled scooter designed for one-handed, outdoor use by individuals with arthritis, mobility or neurological disabilities, or spinal cord injury. The scooter has full differential gear drive, detachable arms, a contoured loop steering wheel, and a dash panel on the steering bar that contains lights, horn, on/off key, and gear indicator light. A twist grip throttle is also located on the steering bar. This scooter is equipped with moped tires.

Paragolfer

The ParaGolfer is a powered standup wheelchair designed to enable people with mobility and lower extremity disabilities and spinal cord injury to play golf. This all-terrain powered chair features both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about while either in a seated or standing position. The ParaGolfer also can be used for other sports that require standing (such as archery or

Pegasus

---- PROTOTYPE --------- PURPOSE: To design a prototype of a stand up wheelchair for individuals with paraplegia or mobility disabilities. One goal of this prototype, Pegasus, is to break away from the negative images and appearances of current wheelchairs. Pegasus allows for an efficient movement into the upright position. A manual actuation in combination with an electric drive motor with gyroscopic sensors (inspired by the Segway) allows the user to maneuver in very small spaces. TITLE: Pega

Permobil K300 Junior Power Chair Hire

Permobil K300 Junior Power Chair Hire is designed for use by children with limited lower extremity as a result of stroke, dystonia or muscular dystrophy. The K300 is supplied with a standard seat that grows with the child. It features adjustable armrests, the powered seat lift and tilt function, and R-net electronics.

Phantom (Models S35001 & S35002)

The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back

Phoenix 3 Wheel Compact Scooter (Model S35010)

The Phoenix 3 Wheel Compact Scooter, model S35010, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a front large carry basket. FRAME (LxWxH): The overall dimensions are 37.8 x 18.9 x 34.6 inches. The ground clearance is 2 inches and the turning radius is 32.3 inches. It has rear 2-inch anti-tippers. The scooter can be disassembled into four

Phoenix 4 Wheel Compact Scooter (Model S35015)

The Phoenix 4 Wheel Compact Scooter, model S35015, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. This scooter includes a headlight and a large carry basket. FRAME (LxW): The overall dimensions are 37.8 x 20 inches. The ground clearance is 2 inches, and the turning radius is 44 inches. It has 2-inch rear anti-tip wheels. The scooter can be disassembled into 4 pieces for sto

Phoenix Hd3

The Phoenix HD3 is a heavy-duty three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a large front carry basket. FRAME: The scooter can be disassembled into 4 pieces for transport. It has rear anti-tip wheels and a plastic basket and headlight on the front of the tiller. Two sets of interchangeable color accent panels, in red and blue, are included. CONTROLS: Electronic c

Phoenix Hd4

The Phoenix HD4 is a heavy-duty four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME: This scooter includes a headlight and a large front carry basket mounted on the tiller and rear anti-tip wheels.The scooter can be disassembled into 4 pieces for transport. Two sets of interchangeable color panels in red and blue are included. CONTROLS: Electric controller mounted on an adjustab

Pilot 2310 3-Wheel Medium Size Scooter (Models Pilot2310Bl18Cs, Pilot2310Bg18Cs, Pilot2310Bl20Cs & Pilot2310Bg20Cs)

The Pilot 2310 3-Wheel Medium Size Scooter, models PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS and PILOT2310BG20CS, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inch

Pilot 2410 4-Wheel Medium Size Scooter (Models Pilot2410Bl18Cs, Pilot2410Bg18Cs, Pilot2410Bl20Cs, & Pilot2410Bg20Cs)

The Pilot 2410 4-Wheel Medium Size Scooter, models PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS and PILOT2410BG20CS, is a four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWXH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inches, and the turning radius is 54 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signa

Pioneer 1 Midsize 3 Wheel Scooter (Model S232/s235)

The Pioneer 1 S232/S235 Midsize 3 Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 27 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with thumb lever handle bar steering. The til

Pioneer 10 Bariatric 4 Wheel Scooter (Model S347)

The Pioneer 10 S347 Bariatric 4 Wheel Scooter is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, rear view mirror, and horn. FRAME (HxLxW): 50 x 60 x 26 inches. The ground clearance is 4 inches and the turning radius is 65 inches. Color choices are red and champagne. The scooter is equipped with and anti-tippers. CONTROLS: Dynamic DS160A controller with automatic safet

Pioneer 10 Deluxe Bariatric 4 Wheel Scooter (Model S341)

The Pioneer 10 Deluxe Bariatric 4 Wheel Scooter, model S341, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 54 x 27 inches. The ground clearance is 4 inches and the turning radius is 62 inches. Anti-tippers are standard. Color choices are red or champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Pioneer 2 Deluxe 4 Wheel Scooter (Model S246)

The Pioneer 2 Deluxe S246 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. This scooter disassembles for storage or transport. The ground clearance is 2 inches and the turning radius is 41 inches. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with adjustable tiller and thumb lever handle bar ste

Pioneer 2 Midsize 4 Wheel Scooter (Model S242/s245 )

The Pioneer 2 S242/S245 Midsize 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 46 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 35 inches. This scooter disassembles for storage or transport and is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb-lever handleba

Pioneer 2Dlx Twin Front Wheel Compact Scooter (Model S246)

The Pioneer 2 DLX S246 Twin Front Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 2 inches and the turning radius is 41 inches. This scooter disassembles for storage or transport. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb lever handle bar s

Pioneer 3 3-Wheel Scooter (Model S132/s135 )

The Pioneer 3 S132/S135 3-Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 45.5 x 46 x 25 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter disassembles for transport or storage. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with thumb-lever handlebar steering. The tiller angle is

Pioneer 3 S131 3 Wheel Scooter (Model S131)

The Pioneer 3 3 Wheel Scooter, model S131, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, turn and hazard signals. FRAME (HxLxW): 45.5 x 46 x 23 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. The tiller angle is adjustable. SEAT (WxD): 19 X 17 inches slidin

Pioneer 4 Full Size 4 Wheel Scooter (Model S142/s145)

The Pioneer 4 Full Size 4 Wheel Scooter, model S142/S145, is a scooter designed for use by individuals with mobility disabilities. Features include headlights, taillight, turn signals, and hazard lights. FRAME (HxLxW): 45.5 x 47 x 25 inches. Anti-tippers and a chromed steel bumper that also serves as a lift handle are standard. CONTROLS: Dynamic Rhino 70A controller with touch keypad and an on/off key switch. The adjustable tiller folds down for storage. SEAT (LxW): 17 x 18.5 inches. The captai

Pioneer 4 S141 4 Wheel Scooter

The Pioneer 4 4 Wheel Scooter, model S141, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, and turn and hazard signals. FRAME (HxLxW): 45.5 x 47 x 23 inches. The ground clearance is 4 inches and the turning radius is 49 inches. This scooter is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. Tiller angle is adjustable. SEAT (WxD): 19 x 1

Pioneer 5 Micro-Size 3 Wheel Scooter (Model S534)

The Pioneer 5 Micro-Size 3 Wheel Scooter, model S534, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and a multi-function display console. FRAME (HxLxW): 35 x 40 x 21.5 inches. The ground clearance is 2.4 inches and the turning radius is 33.8 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller angle i

Pioneer 9 Bariatric 3 Wheel Scooter (Model S337)

The Pioneer 9 Bariatric 3 Wheel Scooter, model S337, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and rear view mirror. FRAME (HxLxW): 50 x 57 x 26 inches. The ground clearance is 3.5 inches and the turning radius is 56.1 inches. Anti-tippers are standard. Color choices are red and blue. CONTROLS: Dynamic DS160A controller with automatic safety steering control.

Pioneer 9 Deluxe Bariatric 3 Wheel Scooter (Model S331)

The Pioneer 9 Deluxe Bariatric 3 Wheel Scooter, model S331, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 49 x 27 inches. The ground clearance is 4 inches and the turning radius is 50 inches. Anti-tippers are standard. Color choices are red and champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Power Base Recliner Seating System

Power recliner designed for Everest and Jennings Lancer, Fortress 655 FS, Invacare XT powered wheelchairs, Quickie P-300, and Permobile Max90 & Super 90. Assembled; systems include reclining frame, rigid seat, rigid or sliding back, complete armrest and legrest assemblies, arm and leg troughs, standard headrest, toggle switch to control recline, and mounting interface to wheelchair. Rigid back 16 inches to 25 inches, sliding back 19 inches to 25 inches in one inch increments. Underseat 24 Vo

Power Picco

The Power Picco is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored frame folds to 36 centimeters after batteries are removed, and includes a support roll. CONTROLS: Programmable single-knob electronic controls. RWD: Electric power drive. UPHOLSTERY: Black. ARMRESTS: Padded armrests. BRAKES: Pressure brake for regular use, and drum brake for downhill use. CASTERS: Two front ca

Power Recliner Interface (Model 3350)

Used in conjuction with a Multimode Interface to permit operation of a power recliner by the same actuator used to operator the wheelchair. Multiple Power Recliner Interfaces may be used to independently operate multiple recliner functions. A toggle switch is provided to select either latching (continous) or momentary recliner operation, and separate up and down speed adjustments are provided to adjust the rate of recliner movement.

Power Tommy

The Power Tommy is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored tubular frame is foldable after removal of batteries. The side panel is removable. CONTROLS: Left or right joystick controls. RWD: Rear wheel drive. ARMRESTS: Height-adjustable and removable arm support. WHEELS: Optional wheel cover. WARRANTY: four-year limited warranty for frame, 2 years for electronics and c

Powered Elevated Chair

CUSTOM ADAPTATION -- PURPOSE: To provide a customized lifting chair for an individual with mobility disabilities that can be easily moved throughout a residential setting, including going through doorways. The chair has a U-shaped base made of rectangular hollow steel with a vertical post at the back, and large casters on the front ends of the U and smaller ones at the back. There are also larger bike-type wheels on either side which can be used to propel the chair if necessary. Additionally, th

Pride Concorde Scooter

The Pride Concorde Scooter is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. This scooter has front and rear running lights and a front wire basket, and disassembles for transport. Available in hunter green only. CONTROLS: Angle-adjustable tiller with a tiller-mounted control box. An on/off key switch with automatic shutoff is included on the control box. RWD: Rear-wheel drive. SEAT: Height-adjustable padded s

Pride Quantum 600 Sport HD Powerchair

Pride Quantum 600 Sport HD Power chair is a bariatric wheelchair designed for use by individuals with limited lower extremity mobility.  It is equipped with high-torque motors and heavy-duty suspension, which is ideal for outdoor use.  The mid-wheel drive allows it to maneuver indoors. It is designed for those that want to make regular use of their power chair outside.  The Pride Quantum 600 Sport HD can ride over uneven terrain.  It has a top speed of 4 miles per hour and a large 70 Ah battery.

Pride® Fusion

The Pride® Fusion is a power wheelchair designed for use by individuals with limited lower extremity mobility as a result of a spinal cord injury, stroke or multiple sclerosis.  It is a rear-wheel drive power chair and is available with a maximum speed of up to 4 miles per hour (6.5 km/h).  Available in configurations: 1. Power Tilt and Manual Recline 2. Power Tilt and Power Recline

Prima Si (Tango) Wheelchair

The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b

Pronto M51 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount.

Pronto M71 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent

Pronto M9I Power Wheelchair

The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v

Proportional Head Control

The Proportional Head Control is a powered wheelchair controller designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This headrest-based joystick enables the user to control a power wheelchair by rotating his or her head on a headrest pad. This controller is available for P&G electronic controls.

Proportional Head Control (Model 3500)

A proportional actuator consisting of a movable padded headrest and a control switch. Movement of the headrest is converted to directional commands required by the Multimode Interface for mode selection and oepration. During wheelchair operation, the proportional head control allows precise control of both speed and direction.

Prowler 3310 3-Wheel Full Size Scooter (Models Prowler3310Mg20Cs & Prowler3310Mg22Cs)

The Prowler 3310 3-Wheel Full Size Scooter, models PROWLER3310MG20CS and PROWLER3310MG22CS, is a heavy-duty three-wheeled scooter designed for outdoor use by large or obese individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the tu

Prowler 3410 4-Wheel Full Size Scooter (Models Prowler3410Mg20Cs & Prowler3410Mg22Cs)

The Prowler 3410 4-Wheel Full Size Scooter, models PROWLER3410MG20CS & PROWLER3410MG22CS, is a heavy-duty four-wheeled scooter designed for outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signals, dual rear view mirror

Quantum Dynamo

Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes a

Quantum Dynamo Ats

Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Syn

Quantum Paediatric Powerchair Range

The Quantum Rehab Pediatric Range is designed for use by children with limited physical mobility as a result of cerebral palsy, muscular dystrophy or stroke.  It comes standard with synergy seating system and has a range of power options.

Quickie P-220

The Quickie P-220 is a powered wheelchair designed for individuals with severe physical disabilities, spinal cord injuries, and mobility disabilities. FRAME: Overall width 24.75 inches and 27.75 inches. The frames are available in a variety of colors. CONTROLS: Integral joystick controller provides digital speed and tilt-control. Breath control, chin control, penta switch, and proportional head control are available. Available single switch controls include the Buddy Button (see separate entry),

Quickie P-222 Se

The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are a

Quickie P100 And Quickie P110

The Quickie P100 and Quickie P110 are powered adult wheelchairs. FRAME: The P100 features a rigid, non-folding frame and the P110 has a folding frame. Frames are available in a choice of 14-, 16, and 18-inch widths. The P100 is also available in a 20-inch frame at extra cost. Both models come in a standard choice of blue, black, or red finishes; 11 optional colors are also available. CONTROLS: Integral joystick control with a choice of right or left mounting. A heavy-duty remote and swing-away r

Quickie P190

The Quickie P190 is a powered wheelchair designed for adult users. FRAME: The rigid frame is available in a choice of 11 standard colors and 3 optional colors.The standard frame is available in a choice of 16 or 20 inches wide; a 20-inch frame is available at an extra charge. Anti-tip tubes are standard. CONTROLS: A remote joystick with programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty control

Quickie P200

The Quickie P200 is a powered wheelchair designed for adult users. FRAME: The standard frame is available in 16- and 18-inch widths. 14-, 15-, 17-, 19-, and 20-inch frames are available at an extra charge. A long frame is also available. The frame is available in a choice of 11 standard colors and 6 optional colors. Anti-tip tubes are standard. CONTROLS: A remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Spec

Quickie P210 Power Recline System (Prs)

The Quickie P210 is an adult powered reclining wheelchair designed for indoor or outdoor use. FRAME: The frame is available in 16- and 18-inch widths in regular and long configurations and is available in a choice of 11 standard and 6 optional colors. CONTROLS: A programmable remote joystick with a programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. This chair is als

Quickie P300

The Quickie P300 is a powered wheelchair designed for adult users. FRAME: The overall frame width ranges from 24 5/8 inches to 28.25 inches depending upon the seat width and caster size. The regular frame is 33 inches long and the long frame is 35 inches long without footrests. The frame is constructed of tri-cell reinforced rectangular tubing and is available in a choice of 11 standard colors and 3 optional colors. The frame constructions allows components and accessories to be bolted directl

Quickie P320

The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-

Quickie Rhythm M5 Power Chair

The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in

Quickie T45

The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2

Quickie Ts

The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on th

Rally

The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control

Ranger Ii - Rm900 Series

The Ranger II - RM900 Series is an adult powered wheelchair for everyday use. RWD: "Free-n-Easy" clutch system. CONTROLS: MCC RIIA Electronics with inductive joystick, 10 function performance menu, full self diagnostics capability, speed selector knob, optional easy remote programmer, an on-demand braking system for braking downhill, a circuit breaker, and automatic correction circuits to evenly maintain speed. SEAT: Seats width 14, 16, 18 & 20 inch widths. Seat depth 16 inches. Seat height

Rascal P327 Mini

The Rascal P327 Mini is a wheelchair designed for use by individuals with limited physical mobility associated stroke, spinal cord injuries, and traumatic brain injury.  It is a compact 4-mile per hour Mid-Wheel Drive indoor/outdoor power chair, with full suspension and comfortable scooter style seating.  The P327 Mini can be used in both indoor and outdoor environments.  

Retractable Headrest System (Models 06-1 & 06-1S)

Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding

Retracting Joy Stick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Retractable joy stick control box for a powered wheelchair to allow the chair to be positioned near a table. Briefly describes a springloaded automatic joy stick box retractor which permits the box to recede as it makes contact with the table and return to its normal position when the wheelchair is backed away. Principal investigator: Theresa Ackerman, Georgia Tech University. SKILLS REQUIRED: Mechanical Engineering. TITLE: Retracting Joy Stick JOURNAL

Robot Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a robotic wheelchair that can climb over steps for individuals with mobility or lower extremity disabilities or spinal cord injury. A group of researchers from Chiba Institute of Technology led by Shuro Nakajima have designed a robot wheelchair that is capable of climbing over steps. The robot wheelchair has four-wheel drive and five axes to overcome a previously insurmountable obstacle for regular wheelchair users. The user navigates wi

Rocket

The Rocket is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Non-folding automotive-style steel unibody construction with optional tie-downs for transport. The chair is 24.75 inches wide. The chasis is available in ocean spray speckle, flaming rocket red, four seasons green, or black. CONTROLS: Fully programmable touch button controls with joystick-style steering. The controls can be right- or left-mounted and switched as needed. The controls can be exten

Rodeo 12 / 14 / 16

The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment.

Roma Shoprider Vienna Power chair

The Roma Shoprider Vienna power wheelchair is designed for use for by individuals with limited lower extremity mobility as a result of stroke, cerebral palsy or multiple sclerosis.  Its compact design and maneuverability make it ideal for use indoor environments. It was designed for those who may not have used a powered wheelchair before. The Vienna is not designed for outdoor use - however, it can be used for minimal use on flat paved areas such as shopping centers. Height adjustments can be ma

Royale 3

The Royale 3 is a 3-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. This scooter has independent suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat and tiller fold for transport or storage. The Royale 3 has an underbody ground clearance of 6 inches and a turning radius of 49.5 inches. Available colors are burgundy red, midnight black and diamond silver. A detach

Royale 4

The Royale 4 is a 4-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities or as an alternative to driving. This scooter has independent front suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat folds for transport or storage. The Royale 4 has an underbody ground clearance of 6 inches and a turning radius of 63 inches. Available colors are burgundy red, midnight black an

Safari Tilt Frame, Safari Tilt Basic, & Safari Tilt Anatomical

The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The

Samba

The Samba is an adjustable hi-low, tilt-in-space chair that offers a unique midline support system for children requiring moderate to higher levels of postural control, suitable for both home and school. The midline support system incorporates a 4 point pelvic strap that corrects the position of the pelvis. This improves alignment and helps prevent rotation and backward tilt. The modular system also eliminates the need for knee blocks. Height, width and angle adjustments can all be made easil

Seeker Ii

Seeker II is a powered all-terrain wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain wheelchair is designed for indoor or outdoor use on sand, grass, mud, snow, or rocky conditions. FRAME (HxW): 36 x 31.5 inches with a 16-inch seat; folded the wheelchair is 21 inches wide. The plastic folding frame has molded ABS plastic plates and hinges and left and right side panels. The chair also has a remov

Shear-Controlling Power Recline Systems

Shear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard features include a solid contoured back with high-density foam and a Cordura

Shoprider Featherlite (Model Te-Fs888)

The Shoprider FeatherLite, model TE-FS888, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 x 22 x 34 inches. The turning radius is 32.5 inches and there are rear anti-tips. This foldable chair is available in burgundy. CONTROLS: Adjustable length VSI joystick controller. RWD: Two 0.45-horsepower motors rear-wheel drive. SEAT

Shoprider Fpc Power Chair (Models Phfw-1118 & Phfw-1120)

The Shoprider FPC Power Chair, models PHFW-1118 and PHFW-1120, is a folding powered wheelchair designed for used by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 46 x 25 x 37 inches (model PHFW-1118) and 46 x 27 x 37 inches (PHFW-1120). For both models, the ground clearance is 3 inches, and the turning radius is 24 inches. The frame is made of steel, and available in b

Shoprider Hd (Model 888Whd)

The Shoprider HD, model 888WHD, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxWxH): The overall dimensions, including the footplate, are 47 x 29 x 50 inches. The ground clearance is 3 inches. The turning radius is 37.5 inches. The base is available in burgundy. CONTROLS: Programmable VR-2 Remote Joystick Controller with VR-2 Main Control Box featuring adjustable speed and battery

Shoprider Scootie

The Shoprider Scootie is a four-wheeled scooter designed for use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 to 40 x 17 x 19 to 34 inches. The ground clearance is 2 inches. The scooter is available in red, yellow, or blue and disassembles without tools for transport and storage. CONTROLS: Controls are mounted on a folding and locking tiller. A horn is also located on the tiller. RWD: Rear-wheel drive

Shoprider Smartie (Model Ul8W)

The Shoprider Smartie, model UL8W, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 36 x 23 x 37 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. Rear anti-tips are included. This portable chair can be dismantled into three parts for transport. The base is available in red and blue. CONTROLS: VSI

Shoprider Sprinter 2-Seater (Model 889-4Dxd)

The Shopper Sprinter 2-Seater, model 889-4DXD, is a heavy-duty four-wheeled scooter designed for outdoor use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis and a companion. The unit includes dual headlights, turn signals, hazard lights, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 55 x 37 x 40 inches. The ground clearance is 4 inches. The turning radius is 59 inches. The base is available in burgundy red and has an open desi

Shoprider Sprinter Xl3 Deluxe (Model 778Xl)

The Shoprider Sprinter XL3 Deluxe, model 778XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad

Shoprider Sprinter Xl4 (Model 889-4)

The Shoprider Sprinter XL4, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for t

Shoprider Sprinter Xl4 Deluxe (Model 889Xl)

The Shoprider Sprinter XL4 Deluxe, model 889-XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad

Shoprider Sunrunner (Model 777-3 /4)

The Sunrunner, model 777-3/4, is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a front black mesh basket. FRAME (LxWxH): The overall dimensions are 43 to 46 x 22 x 35 inches. The wheelbase is 34 x 18 inches with a ground clearance of 3 inches. The turning radius is 40 inches. The frame disassembles for transport. The scooter is available in burgundy or blue (with five-position tiller)

Shuttle

The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the

Sidekick

The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv

Sighted Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a robotic wheelchair that uses three dimensional (3D) imaging to allow individuals who are blind or have low vision and use a wheelchair to "see" when navigating in the indoor and outdoor environment. Researchers at the Luleå University of Technology (LTU) in Sweden have developed a wheelchair that uses a laser sensor to generate a 3D map of its surroundings, which is then transferred to an on-board haptic robot, allowing the robot to na

Skippi & Skippi Plus

The Skippi and Skippi Plus are child's powered wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury. Adjustable and designed to grow with the child, it has multiple configuration options, and it was design to have a low profile and be compact and maneuverable. FRAME (WxL): 22.4 x 27.6 (without leg rests) or 33.5 (with leg rests) inches. It has a turning radius of 21.7 inches, and the ground clearance is 66 m

Snapdragon

The SnapDragon is a powered elevating wheelchair designed for indoor or outdoor use by children as young as one year old with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of the seat from the floor

Snazzy 2 (Model 777-4Wa)

The Snazzy 2, model 777-4WA, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The scooter is equipped with rear reflectors and a front mesh basket. FRAME (LxWxH): The overall dimensions are 44 x 21 x 18 to 36.5 inches. The turning radius is 36.5 inches. The scooter is equipped with a front bumper and rear anti-tip wheels. CONTROLS: Finger tip controls are mounted on a single-position tiller.

Solar Powered Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a solar powered wheelchair with retractable panels for individuals with lower extremity or mobility disabilities, spinal cord injury, or cerebral palsy. A team of students and faculty from the University of Virginia School of Engineering created a prototype design of a solar powered wheelchair with retractable panels inspired by the idea from a man with cerebral palsy from Turkey. The Solar Powered Team (SPT) created the prototype using

Solo 6600

The Solo 6600 is an adult folding, powered wheelchair. The overall measurement of the the wheelchair is 25.25 w x 37 h x 31.5 l inches. A detachable, sealed joystick is the standard controller. Lifetime sealed and lubricated drives are also standard. The seat and back measurements are: seat - 18 w, between armposts at seat level - 16.25, seat from floor - 20, top of armrest from seat - 10, back from seat - 15.25, depth of seat - 16, inches. The seat and back are vinyl upholstered with textilene

Solo Ii (Models 1262 & 1264)

The Solo II, models 1262 and 1264, is an add-on power unit designed for the manual wheelchair user who wants to upgrade to a power wheelchair without investing in a completely new chair. The Solo II converts a manual wheelchair to a power chair with just the replacement of the rear wheels, and the installation of a joystick, motor drives and batteries. Solo II models 1262 and 1264 are designed to fit wheelchairs with seat widths from 14 inches to 20 inches. Model 1262 has a 20:1 gear ratio and m

Sovereign (Models 888-3Es & 888-4Es)

The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance o

Sovereign (Models 888B-3 & 888B-4)

The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model

Sparky Paediatric Powerchair

The Pride Sparky is a power chair designed for use by children with limited lower extremity mobility as a result of cerebral palsy, neurological involvement or spinal cord injury.  It offers both power tilt and manual recline. Rear-wheel drive ensures that the Sparky takes up as little room as possible, and its maneuverability is designed to assist an active child with getting around.  The Sparky’s controller is designed for use by young children, and the rear anti-tips ensure the safety of the

Sphere Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a powered wheelchair that allows users with mobility disabilities to move, crouch, stand, or lay down all while seated and without leaving the chair. The Sphere Chair is a powered wheelchair that looks like a chair sitting on top of a ball (i.e. sphere) with two casters extending from the rear of the frame. The Sphere’s unique design allows for greater freedom of motion. Secured in the ergonomic seat, the user can switch between positi

Spitfire 1310 3-Wheel Compact Scooter (Models Spitfire1310Bl16Fs & Spitfire1310Rd16Fs)

The Spitfire 1310 3-Wheel Compact Scooter, models SPITFIRE1310BL16FS and SPITFIRE1310RD16FS, is a three-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 42 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 43 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport

Spitfire 1410 4-Wheel Compact Scooter (Models Spitfire1410Bl16Fs & Spitfire1410Rd16Fs)

The Spitfire 1410 4-Wheel Compact Scooter, models SPITFIRE1410BL16FS and SPITFIRE1410RD16FS, is a four-wheel scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 43 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 47 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport or

Spitfire Ex 1320 3 Wheel Compact Size Scooter (Models Spitfire132016Fs12 & Spitfire132016Fs21)

The Spitfire EX 1320 3 Wheel Compact Size Scooter, models SPITFIRE132016FS12 and SPITFIRE132016FS21, is a three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 41 x 19 x 36 inches. The ground clearance is 3 inches, and the turning radius is 46 inches. It has rear anti-tip wheels and a standard plastic basket attached to the front of the tiller. The scooter can be d

Spitfire Ex 1420 4-Wheel Compact Scooter (Models Spitfire142016Fs21 & Spitfire142016Fs12)

The Spitfire EX 1420 4-Wheel Compact Scooter, models SPITFIRE142016FS21 and SPITFIRE142016FS12, is a four-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): 42 x 20 x 36 inches. The ground clearance is 3 inches, and the turning radius is 50 inches. It has rear anti-tip wheels and a standard plastic front basket with a removable liner bag. The scooter can be disassembled into 5 pieces for tr

Sportrider

The SportRider is a 3-wheeled scooter designed for outdoor use by individuals or couples with lower extremity and mobility disabilities or as an alternative to driving. The scooter comes with a single captain seat or a dual bench seat. It can be operated with either two G-24 (75-79 amp hour) batteries or two G-27 (85-100 amp hour) batteries. FRAME (LxWxH): 65 x 29/36 x 44 inches. The frame has motorcycle styling, and the seat folds down for transport or storage. The SportRider has an underbody g

Sprint Gt

Sprint GT is a reclining powered wheelchair designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. FRAME (HxLxW): The steel frame is 102 x 85 x 65 to 67 centimeters. When the leg support is extended, the wheelchair length is 113 centimeters. SEAT (HxL): 54 x 39 to 50 centimeters. The back height is 45 centimeters. ARMRESTS: The arm support height is 20 to 25 centimeters. BRAKES: Included. WHEELS: Large volume pneumatic tires. FOOTRESTS: Includes l

Stand-N-Ride (Model Snr And Snr2)

The Stand-N-Ride, model SNR and SNR2, is a 3-wheeled scooter designed for use by individuals or couples with lower extremity and mobility disabilities. It can used while standing or sitting. FRAME (LxWxH): 36.3 x 25.3 x (48-36) inches with anti-tippers,It can be disassembled into two parts for transport or storage. The Stand-N-Ride has an underbody ground clearance of 2.75 inches and a turning radius of 22 inches. The only available color is black. An optional detachable basket can be attached i

Standing Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a standing wheelchair for individuals with mobility disabilities and other individuals who use wheelchairers. Similar to the Segway, the Standing Wheelchair is a two-wheeled cruiser designed to provide with a way to travel while standing. The wheels underneath the Standing Wheelchair perform the same function as those of a regular wheelchair; however, the person is actually standing rather than sitting. The user's legs are held in place

Storm Series Tdx4

The Storm Series TDX 4 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41 (depending on seating system) x 35.25 x 25.5 inches (28.5 inches with 20-inch joystick). The frame includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet

Storm Series Tdx5

The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit

Streamer Compact Power Chair (Model 888Wb)

The Streamer Compact Power Chair, model 888WB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. Three-inch ant-tip wheels are standard. The chair disassembles for transport. The chai

Streamer Mid-Wheel Power Chair (Model 888Wnlb)

The Streamer Mid-Wheel Power Chair, model 888WNLB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. The chair disassembles for transport. The chair is available in blue, forest gree

Streamer Mid-Wheel Power Chair With Curb Skipper (Model 888Wnlb-Cs)

The Streamer Mid-Wheel Power Chair with Curb Skipper, model 888WNLB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inche

Streamer Sport (Model 888Wa)

The Streamer Sport, model 888WA, is powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 45 x 24 x 40 inches. The wheelbase is 41 x 23 inches with a ground clearance of 3 inches. The turning radius is 17.7 inches. Two rear 3-inch anti-tip wheels are standard. The chair disassembles for transport. The base is available in blue or burgundy.

Streamer Sport Power Chair With Curb Skipper (Model 888Wab-Cs)

The Streamer Sport Power Chair with Curb Skipper, model 888WAB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 38 x 22.5 x 27.5 to 40 inches. The wheelbase is 23.5 x 23 inches with a ground clearance of 3 inches. The turning radius is 27 inches with the footpl

Streamer Sport Rehab (Model 888Wa)

The Streamer Sport Rehab, model 888WA, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 37 x 24 x 32 inches. The ground clearance is 3 inches, the turning radius is 17.7 inches. The base is available in red and blue. CONTROLS: Self-diagnosing PG Drives VSI Joystick Controller. RWD: Two 0.60-horsepower motors rear-wheel drive. SE

Street Corpus

The Street Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 42.25 x 24.75 inches; 32.5 x 24.75 inches (base only). The minimum dimensions for transport (HxLxW) are 31.5 x 32.5 x 24.75 inches. Minimum turning radius is 48 inches. The HD3 Corpus has a ground clearance of 2.4 inches and 4-wheel adjustable independent suspension. The base frame is available in black/gold, copper metallic and blu

Sunfire Plus Power Rear Wheel Drive Wheelchair Base

The Sunfire Plus Power Rear Wheel Drive Wheelchair Base is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 39 x 24 inches. Available in blue, red, or gold, the chair is equipped with 2-inch solid rear-mounted anti-tip wheels. CONTROLS: Programmable PG controller with adjustable joystick mount. RWD: Two-motor rear wheel drive. SEAT: Swivel and reclining captain's seat with adjustable headrest and seat belt. ARMRESTS: Flip-back pa

Super Light Portable Scooter

The Super Light Portable Scooter is designed for use by individuals with mobility disabilities. This unit comes standard with a headlight, a horn, and a rear basket. FRAME: Steel frame disassembles without tools for storage and transport and has a turning radius of 27.5 inches. CONTROLS: Handle mounted electronic controls. FWD: Front wheel drive. SEAT: Height-adjustable 360-degree swivel seat is 18 inches wide. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. BRAKES: Electromagnetic braking system

Swingaway Mounting Kit (Model 3150-1)

Mounting system for the 3185 joystick for chin oepration. Includes a 12 by 18 inch right angle mounting rod, custom sizes or bends can be provided. A 1/2 inch stainless steel mounting rod fits into a 3/4 inch vertical shaft and a swingaway strap clamp for attachemnt to a standard 7/8 inch diameter wheelchair/power recliner back bar. Permits the joystick to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting apparatus.

Swingaway Mounting Kit (Model 3514)

Used for mounting a head operated actuator to the wheelchair back bar or push handle. The mounting kit consists of two right angle mounting rods joined by a double rod clamp and fitted to a pivot shaft, and a strap clamp for attachment to 7/8 inch diameter wheelchair tubing. Permits the actuator to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting.

Switch Head Control (Model 3519)

A head operated switch actuator incorporating three Model 3265 Disc Switches. The Disc Switches are attached to adjustable monting hardware for positioning the switches consistent with the user's abilities. Normally used in conjunction with the Model 3450 Triswitch Input Controller, and mounted with the Model 3514 Swingaway Mounting Kit.

Switch It Opti-Stop

The Switch It Opti-Stop is a powered wheelchair controller designed for use by individuals who use powered wheelchairs. Intended for use with sip N’ puff controls in the latched mode, this device is used as a safety stop switch to automatically stop the wheelchair when the person driving the chair removes the tube from the mouth.

Switch Options/ecu Module For Arrow Mcc (Model 1551M)

Optional module installed into Arrow MCC wheelchair controller. Provides for switch, sip'n'puff, rim head control of wheelchair. Attendant control input. Two connectors, each with 4 ECU output switch closures, to operate recliner or other devices. Module provides method of controlling accessories by only adding one switch to basic joystick; also allows other control techniques. May set 1, 3, or 5 forward speeds; selectable cruise mode allows control to be released while chair continues forward;

Switch Output Cable (Model 3329)

Used to expand the capability of a Multimode Interface by providing four isloated and independent switch closure outputs controlled by the Multimode's auxiliary operating mode. These outputs (minature phone plugs) may be used to operate various devices if the device is designed for oeration by one to four indpendent switches.

Switch Output Controller (Model 3340)

Used to expand the capbility of a Multimode Interface by providing four isolated and independent switch closure outputs controlled by the Multimode's auxillary operating mode. These outputs (miniature phone jacks) may be used to operate various devices if the device is designed for oepration by one to four independent switches. Includes additional circuitry to inhibit the Multimode's automatic reset function to allow uninterrupted operation.

Switched Head Arrays

The Switched Head Arrays are powered wheelchair controllers designed for use by individuals with severe physical disabilities or spinal cord injury. These arrays are an arrangement of electronic sensors in a head rest designed to enable control of the functions of a power wheelchair via head movement. These systems utilize an adjustable and growable three-pad headrest with one Zero-Touch Sensor (ZTS) in each pad. As standard, the right pad turns right, left turns left and center activates forwar

Tailwind Power-Assist Wheelchair

Tailwind Power Assist Wheelchair is designed for use by individuals with mobility disabilities. It is a manual wheelchair that provides on-board power when you need it. The Tailwind Power Wheelchair is designed to help users safely navigate terrain with discreet electronics that direct quiet motors to provide either a smooth boost of power or gentle breaking as required. It can be used uphill, downhill, on carpet and on uneven surfaces. POWER: Rechargeable battery, Dry Cell, NiMH 8.4 Ah. SIZES:

Tandem Electric Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a simple, fun, and sporty aesthetic electric vehicle for individuals with lower extremity or mobility disabilities, people with spinal cord injury and others who use a wheelchair. After spending an extended period of time in a wheelchair to better understand the challenges of wheelchair users and individuals with disabilities, designer Alexandre Pain, proposed that it was the stigma associated with the wheelchair that appeared to be one

Tank Chair

The Tank Chair is a heavy duty powered wheelchair designed for off-road use by individuals with lower extremity or mobility disabilities or spinal cord injury. With its tank-style rubber tracks and a high-torque electric motors, this custom all-weather off-road wheelchair can go into outdoor environments including streams, mud, snow, sand, and gravel. FRAME: One-Piece Steel Chassis with custom colors. MOTOR: 24 volt/2 horsepower continuous/2700 revolutions per minute/variable speed motor. POWER:

Tek Robotic Mobilisation Device

---- PROTOTYPE --------- PURPOSE: To design a prototype of a standing wheelchair that allows users with lower extremity or mobility disabilities or spinal cord injury to navigate through various environments not designed for use by people who use wheelchairs. The Tek Robotic Mobilisation Device is a powered stand up wheelchair developed by a team of Turkish scientists, led by Necati Hacikadiroglu. The device expands the way wheelchair users can interact with their environment. Wheelchairs genera

Tek Robotic Mobilisation Device

TEK Robotic Mobilization Device is a standing wheelchair that allows users with lower extremity or physical disabilities to navigate through various environments not typically accessible by wheelchair. The user can board the TEK Robotic Mobilization Device securely from a seated position such as a wheelchair or mat. The suspension system contains a gas spring, which balances the weight of the user so that standing up requires a gentle pull. Tek Robotic Mobilization Device holds the user in an

Teknique Fwd

The Teknique FWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 41.9 x 25 inches. It has a turning radius of 24 inches and a ground clearance of 3.6 inches. Front anti-tip wheels are included. A cup holder and side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONTROLS: Programmable microprocessor controller. The armrest-mounted j

Teknique Gt

The Teknique GT is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42.5 x 25.3 inches. It has a turning radius of 37 inches, a ground clearance of 4.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor control

Teknique Rwd

The Teknique RWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42 x 25 inches. It has a turning radius of 36 inches, a ground clearance of 2.5 inches, and a 2-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor controller

Teknique Xhd

The Teknique XHD is a heavy-duty powered wheelchair designed for use by large individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 47 x 27.5 inches. It has a turning radius of 28 inches, a ground clearance of 3.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. Front anti-tip wheels, a cup holder and a side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONT

The Flyer

The Flyer is a battery powered scooter designed to disassemble into five lightweight components in 60 seconds or less for persons with mobility disablities and limited hand strength. For this scooter, no tools are need for assembly/disassembly, and the electrical connections are made automatically when re-assembling. It is made of rust-free aluminum and can be stowed in trunks of most cars without the aid of a lifter. The scooter features a single level tiller for maneuvering; a large front bask

Tongue Drive System

---- PROTOTYPE --------- PURPOSE: Engineers at Georgia's Institute of Technology have developed a prototype that allows individuals with severe disabilities to operate a wheelchair or computer by moving their tongue. The prototype requires the user to have a small magnet the size of a grain of rice be pierced into his or her tongue. A companion device embedded with magnetic sensors, such as an orthodontic brace or headset, can then trace the movement of the tongue and transmit those signals wire

TopChair S

The TopChair S is a electronic seat intended to help people in wheelchairs or with mobility disabilities to move independently. Is designed in three different models.

Tracabout Individual Recreational Vehicle 2000 (Irv 2000)

The TRACABOUT Individual Recreational Vehicle 2000 (IRV 2000) is a powered wheelchair designed for indoor and outdoor use by individuals with mobility disabilities. This chair crosses soft surfaces, plowed earth, snow, mud, ruts, sticks, and other obstacles less than four inches high and also maneuvers within the home. FRAME (LxW): 38 x 28 inches and fits through most standard doorways. The chair turns in its own length with a zero turning radius. CONTROLS: Joystick controller mounted on the arm

Travelscoot

The TravelScoot is a folding lightweight scooter designed for use by individuals with mobility disabilities. FRAME (HxLxW): 34 x 37 x 23 inches, or 10 x 33.5 x 12 when folded. The frame is made from aircraft-grade polished and anodized aluminum. It comes with a heavy-duty carrying bag and fabric caddy, and accomodates a cane or pair of crutches. The handlebar height is adjustable. CONTROLS: Integrated controller. RWD: 24-volt, 250-Watt direct current (DC) motor. SEAT: 17-inch wide height-adjusta

Tri-Scoot

Three wheeled powered wheelchair alternative. Overall frame length 42 1/ 2 inches. Overall frame width 19 inches. 18 inch seat width. 16 inch seat depth. Bucket seat swivels 360 degrees. Adjustable seat height from 20 to 24 inches. 16 inch back height. 12 or 24 volt front wheel drive operation. 2 speed or variable speed control. Maximum speed 4 miles per hour. Use of 2 batteries doubles the range from 8 to 16 miles. Maximum weight capacity 180 pounds. Disassembles for transport. Weight not inclu

Triswitch Input Controller (Model 3450) & Varibrite Triswitch Display (Model 3460)

The Triswitch, in conjunction with three single-switch actuators, is used for mode selection and oepration of a Multimode Interface. Two of the switch actuators provide left and right actuator commands, while the third switch provides both forward and reverse commands. The display incorporates forward and reverse directional lights with corresponding arrows to provide a visual indication of forward/reverse switch selection. Five additional mode display light are provided to indicate when the Mul

Vanderbilt Exoskeleton

---- PROTOTYPE --------- PURPOSE: To design a prototype of an advanced exoskeleton that enables individuals with paraplegia (severe spinal cord injury) to stand, walk, sit and, climb stairs. A team of engineers at Vanderbilt University’s Center for Intelligent Mechatronics has developed a powered exoskeleton that enables people with severe spinal cord injuries to stand, walk, sit and climb stairs. Its light weight, compact size and modular design promise to provide users with an unprecedented de

Varibrite Mode Display (Model 2775-4)

A remote display used in conjuction with a Multimode interface to indicate when the system is in standby, or in one of four oeprating modes. The display is mounted on a flexible gooseneck to position the display for optimum viewing, and to help protect the display from impact damage. The gooseneck is fitted to a mounting tube for attachment to an armrest using a standard hand-control clamp.

Vertis by Heartway Medical

Vertis by Heartway Medical is a prototype designed for use by individuals with limited lower extremity strength and mobility as a result of cerebral palsy, brain tumors, spinal muscular atrophy or multiple sclerosis.  It moves the users from a sitting to standing position for social interaction and environmental access.  

Viamobil

Viamobil is an attendant operated wheelchair brake and power assist designed for use by caregivers of individuals with mobility or severe hhysical disabilities or spinal cord injury. This pushing and braking aid is used exclusively by the person escorting the occupant of the wheelchair. It assists the caregiver to push and brake the wheelchair, and can overcome slopes of up to 18 percent. The unit is attached to the bracket on the wheelchair. The caregiver presses the drive lever to commence dri

Victory 10 3-Wheel Scooter (Model Sc610)

The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering.

Victory 10 4-Wheel Scooter (Model Sc710)

The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTI

Victory 9 3-Wheel Scooter (Model Sc609)

The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder;

Victory 9 4-Wheel Scooter (Model Sc709)

The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering

Victory 9 Ps 3-Wheel Scooter (Model Sc609Ps)

The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steeri

Vita

The Vita is a 4-wheeled electric scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 55.5 x 28 x 55 inches. The Vita has full independent suspension, an underbody ground clearance of 3.5 inches, and a turning radius of 50.5 inches. Available color is sunset orange with sparkles or silver. An optional black wire basket that attaches behind the seat is available, and a black, heavy-duty travel case can be added in place of the basket.. CON

Weebot

---- PROTOTYPE --------- PURPOSE: To design a prototype of a mobility device for babies and young children with physical and mobility disabilities. Researchers and designers at the Ithaca College in Ithaca, NY have designed and developed a prototype device that allows children with physical and mobility disabilities to explore greater independence as part of the Tots on Bots project. They created the WeeBot using a baby seat that is then strapped onto a Wii Fit Balance Board that sits on top of

Wheelchair Accessable 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It a 4-seater picnic table has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainsable sources – FSC Certified.

Whill Type-A Motorized Wheelchair

The WHILL Type-A Motorized Wheelchair is different from conventional wheelchair designs, mainly because the user sits in an active rather than an inactive position. The wheelchair can be leaned into, like a Segway or a bike, with a controller that can be manipulated with a single hand. The wheelchair also has a small turning radius and can easily be turned on a dime. Additionally, it can easily handle riding on difficult terrain like grass, gravel, snow and dirt. The chair has three different mo

Wrangler (Model Pmv 600)

The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear moto

X850 Corpus

The X850 Corpus is a heavy duty powered wheelchair designed for outdoor, off-road use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 49-57 x 28 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3.25 inches and 4-wheel adjustable independent suspension. The base frame is available in black onyx, crystal blue and vintage wine. Front halogen lights and rear lights are included. CONTROLS: Safegate joystic

Xo-303 Standing Wheelchair

---- PROTOTYPE --------- PURPOSE: The Karman XO-303 Power Wheelchair with Stand-Up Wheelchair is a prototype that offers many health benefits previously unavailable to those in a wheelchair. By putting the body in a standing position, the chair provides users with better blood circulation, kidney and bladder functioning, as well as muscle tone. In addition the ability to place persons in a standing position reduces muscle contracture and bone decalcification, thereby reducing the risk of osteopo

Z-Chair

The Z-Chair is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 29 x 19 inches (without foot platform) with a 1.75-inch ground clearance and a 26.75-inch turning radius (with foot platform). This lightweight wheelchair has a limited suspension and a 3-inch rear anti-tips. The chair can be disassembled into 4 parts for easy transport. The chair is available in red and blue. CONTROLS: 40 amp

Zero Shear Power Recliner

Zero shear power recliner for Invacare Arrow recliner frame and sectional back chairs, or Everest & Jennings recliner frames 47 or 49, and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Reclining frame, sliding back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat module mount standard. Toggle switch control. Back height 19 to 25 inches in one inch increments. Underseat 24 volt DC act

Zip'r3 Travel Scooter

The Zip'r3 Travel Scooter is a portable scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 36.4 x 19.5 inches. The ground clearance is 2.1 inches and the turning radius is 30 inches. Anti-tip wheel is included. This scooter disassembles into four pieces for travel. CONTROLS: Large control panel. SEAT: Foldable, height-adjustable swivel chair with metal frame and foam padding. ARMRESTS: Included. WHEELS: One 2 x 7.5 inch solid front tire and two 2.5 x 7.5 inch solid

Zip’R3 Xtra Hybrid Travel Scooter

The Zip'r3 Xtra Hybrid Travel Scooter is a mid-size three wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket and headlight are standard. FRAME (HxLxW): 28 x 40.5 x 19 inches. The ground clearance is 3 inches and the turning radius is 40 inches. Available colors are red and blue. SEAT: Height-adjustable, fold-down swivel seat. UPHOLSTERY: Vinyl upholstery. ARMRESTS: Flip-up armsrests. WHEELS: 7.5 inch front and rear flat- free tires. POWER: Uses two

Zip’R4 Leisure Travel Scooter

The Zip'r4 Leisure Travel Scooter is a lightweight, portable 4-wheeled travel scooter designed for indoor or outdoor use by persons with mobility disabilities. A front basket and headlight are standard. FRAME (HxLxW): 27 x 36.4 x 19.5 inches. The turning radius is 38 inches and the ground clearance is 2.1 inches. An anti-tip wheel is included. The scooter disassembles into four parts for transport. Available colors are red and blue. SEAT: Foam-filled adjustable, fold-down swivel seat. ARMRESTS:

Zip’R4 Xtra Hybrid Travel Scooter

The Zip'r 4 Xtra Hybrid Travel Scooter is a mid-size four wheel travel scooter. This scooter is designed for individuals with mobility disabilities. Front basket and headlight are standard. FRAME (HxLxW): 28 x 40.5 x 19 inches. The ground clearance is 3 inches and turning radius is 43 inches. Available colors are gloss red and blue. SEAT: Height adjustable, fold-down swivel seat. UPHOLSTERY: Vinyl covered seat. ARMRESTS: Flip-up armsrests. WHEELS: 7.5 inch front and rear flat free tires. POWER:

 
Processing...


Driving Walking/Biking Public Transit  Get Directions