Tables

Results: 242

Able Generation Play Table

The Able Generation Play Table is a cut out table designed for use by children with physical disabilities. This wooden table enables the child to be surrounded on three sides, stabilizing the arms and aiding in focusing the attention. The table tilts to five, 15, or 25 degrees. A lip on the inside and outside edges minimizes the possibility of small items, books, and papers sliding off the table when the top is tilted. This table may also be used during floor sitting or supported standing. OPTIO

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Ableware 706010000 Laptop Wheelchair Desk

Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.

Accella Series (Models 6030, 4830 & 6024)

The Accella Series, models 6030, 4830, and 6024 are computer work centers and height-adjustable work tables designed for use by individuals who use wheelchairs. The height adjustment, which is accomplished using the built-in hand crank, also provides access for individuals who stand or use standing aids while working. The hand crank is located underneath the tabletop and folds out of the way when not in use. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIO

Accella Treatment Table (Model 6030)

The Accella Treatment Table, model 6030 is a treatment table designed for use with children in therapy settings. The height-adjustable table features a permanently attached treatment mat of bacteria-resistant reinforced vinyl covering over padded high-density polyurethane foam, and height adjustment using a built-in hand crank. The lower heights facilitate transfers, while the higher levels accommodate treatment. DIMENSIONS: The table has a height adjustment range of 24 to 36 inches and a surfac

Acella Adjustable Group Therapy Table (Model 7236)

The Adjustable Group Therapy Table, model 7236 is a treatment table designed for use in therapy settings. The height-adjustable table has a laminate top and height adjustment is accomplished using the attached hand crank which folds under the table when not in use. The table seats six to eight individuals, including wheelchair users. DIMENSIONS: The height adjusts from 27 to 39 inches and the table surface is 72 x 36 inches. COLOR: The laminate surface is available in amber maple or golden oak.

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Activity Tray

The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that

Ada Compliant Wheelchair Accessible Desk (Model 876)

The ADA Compliant Wheelchair Accessible Desk, model 876, is a height adjustable classroom desk designed for use by children who use wheelchairs. This table has a polyester powdercoated frame, nickel-chrome plated legs, and either a fiberesin-laminate or plastic desktop. The telescoping legs are adustable by sliding the lower leg inserts into the upper legs and tightening a set screw. The lower leg inserts have adjustable nylon glides and optional locking wheels. DIMENSIONS (LxW): The table top i

Adapta Massage Table (Model Mt-100)

The Adapta Massage Table, model MT-100, is a portable treatment table. This manually height-adjustable table folds for transport and features an adjustable face cradle, dual locking knobs, a patented auto-lock cable system, and a hardwood frame. A deluxe carrying case is included. OPTIONS: Armrest accessory and additional carrying case. DIMENSIONS: The table is 30 x 73 inches and the height adjusts from 25 to 35 inches. CAPACITY: This table can withstand a static load of 2,000 pounds and has a w

Adapta Series Treatment Tables (Models Ae-3, 100, & 300)

Adapta Treatment Tables are powered treatment tables designed for use in therapeutic settings. These tables offer horizontal travel, enabling placement near a wall; flexible sections; continuous support surfaces; height adjustability; and foot-operated controls. Model AE-3 is a three-section table available with or without factory-installed casters. DIMENSIONS: Model 100 is 28 x 74 inches. Model 300 is 28 x 75 inches. All models adjust from 19 to 38 inches high. The horizontal travel is 6 inches

Adapted Desk.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Desk designed and modified by someone with cerebral palsy so he could store items where they are easy for him to reach and to hold books for reading. Made from single pedestal desk 48 by 30 inches wide with legs shortened. Bookcase made of 3/4 inch hardwood with two shelves. Two tilted wooden trays, extended across the desk, are used as bookholder. SKILLS REQUIRED: Woodworking. TITLE: Adapted Desk JOURNAL: Accent on Living REF: Vol 30 No 1, Summer 1985

Add-On Table

CUSTOM ADAPTATION PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table. WEBSI

Adjustable Desk With Storage

The Adjustable Desk With Storage is a height adjustable desk designed for use by individuals who use wheelchairs. This desk has a large work surface with a curved cutout for accessibility. An attached vertical storage shelf/box is located on the side to provide knee space. The height adjusts using a knob-style column lock on the legs. DIMENSIONS (LxW): The top measures 40 x 24 inches. The height adjusts from 23 to 33 inches. COLOR: Maple finish laminate top with almond powder-coated base. WARRA

Adjustable Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor table adjusts to set work area at proper height and angle for child. Plywood table with 12 inch by 18 inch top. Upper side panels measure 8 inches by 12 inches; lower side panels measure 10 inches by 12 inches. Double side panels allow user to adjust height and angle. Softwood edge can be added around front and top sides. A cutout can also be added. To determine the correct size and shape of the cutout, bend a piece of coat hanger or other soft w

Adjustable Hand Therapy And Activity Table (Model Gpp-3636)

The Adjustable Hand Therapy and Activity Table, model GPP-3636, is a hand/wrist/forearm exercise table designed for use in therapy settings. The height-adjustable table has a laminate top and a dual comfort recess to provide close positioning for the therapist and the client. Height adjustment is accomplished by pulling on the adjustment knob. To lower the table, the knob is pulled and gentle pressure is applied to the top. OPTIONS: Casters. DIMENSIONS: The height adjusts from 24 to 36 inches an

Adjustable Height Individual Cut Out Work Table (Model 372)

The Adjustable Height Individual Cut Out Work Table, model 372, is an adjustable height work surface with a large cutout and raised rim on 3 sides. The legs are made with chrome plated steel. Top is 24 by 24 inches with 12 by 15 inch cutout. Height adjusts from 22 to 35 inches. Other size cut outs are available on request at additional cots.

Adjustable Height School Desk (Model 370)

This is an adjustable height functional school desk for wheelchair students. The features include a cut out that permits close access and a large working space. A bookholder under right side of the table is available for storage. The desk legs are made of chrome plated steel and plastic adjustable glides are attached to the legs for uneven floors. The surface is wood grain laminated and scratch resistant. DIMENSIONS: height adjusts from 24 to 34 inches, top 40 x 24 1/2 inches, cut out 9 x 14 inc

Adjustable Height Tilt Top Work Table (Model 371)

This tilt top table is adjustable and functional for wheelchair students. The offset cut out allows close access and a large working space for the student. A bookholder on the right side has amble space for storage. The legs are chrome plated steel. DIMENSIONS: height adjusts 25 to 29 inches, top tilts to a 45 degree maximum, the cut out is 9 x 14 inches, 27 inches exist between legs and the book holder.

Adjustable Leg Work Table (Models 42-254/3D, 42-255/0D, & 42-256/8D)

Adjustable height work table. Laminated plastic top table on 1 1/8 inch thick high density particle board. Height adjusts 22 to 30 inches in 1 inch increments. 2 tubular steel legs with supports. Variety of table sizes.

Adjustable Work Carrel.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Work carrels, one with an adjustable work surface, the other with a hinged work surface to allow variation in placement including people needing to use their feet. Three sided carrel with adjustable height horizontal surface. A second version has a segmented hinged work surface to allow additional variations. Detailed assembly drawings are shown. They have been represented in a very small font. Contact developer for larger prints. COMMENTS: For additio

Adjustacart

The AdjustaCart is a height adjustable desk or computer work center designed to be configured for the user's needs. This desk features a control pad which, when squeezed, raises or lowers the worksurface to the desired level. The cart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and

Advantage Lift Iii

The Advantage Lift III is an electrical treatment table designed for therapists assisting persons with biomechanical exercises. With its electric lift table base, therapists are able to utilize the cordless twin toe switches on either side of the table for height adjustment; this is designed to help maintain better optimum ergonomics with minimal stress. This therapeutic table is made from a textured polypropylene with an enameled steel base. OPTIONS: Table Tops: Traditional rectangular, Contour

Alvin Reflex Table

The Alvin Reflex Table is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. This table has a wide, open base and telescoping legs with easy-grip height-adjustment knobs. The large Melamine top is angle-adjustable from zero to 45 degrees and features a PVC rim to prevent items from rolling or sliding off. A half-circle cut-out provides access for wheelchair users. This table folds flat for storage. DIMENSIONS: The top is 30 x 40 inches. The height adjust

Anthrocart

The AnthroCart is a computer work center or height adjustable desk designed to be configured to meet the user's needs and provide ease of access. The AnthroCart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and front locking casters prevent rolling when mobility is not required. OPTIO

Apollo Square Picnic Table - Wheelchair Accessible (Models T46Eb-3Sm & T46Eb-3S)

The Apollo Square Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This square table is made of plastic-coated steel, with seats on three sides and space for a wheelchair on one side. The table has an umbrella hole in the center and is available in portable/surface mount (model T46EB-3SM) or inground frame (model T46EB-3S) models. OPTIONS: Aluminum mounting plates to hide mounting brackets and hard

Apollo Wheelchair Accessible Picnic Table (Models T9Ebrdcppsm & T9Ebhdcps)

The Apollo Wheelchair Accessible Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular picnic table has a single long table top with one long bench on one side and two shorter benches on the other, with space for a wheelchair between the two shorter benches. There is an umbrella hole in the center of the table top. The table is made of plastic-coated steel and is available with either a portable/surface mount

Artist's Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable angle table can be built to any height. Instructions for wooden table. Top is an adjustable angle easel. Frame can be built to any height including wheelchair accessible. Includes drawing and dimensions for materials. SKILLS REQUIRED: Woodworking TITLE: Dream Table for an Artist REF: Article: Sunset Magazine, February 1990, pp 124B-125. PAGES (including cover):2 1990.

Aurora Ultra-Light

The Aurora Ultra-Light is a treatment table designed for use by therapists assisting persons with biomechanical exercises. This lightweight portable table is designed to offer more recess at the ends of the table so less wood is used. It features: CableLock; powder-coated aluminum stabilizer bars; face rest plates at both ends; a finger joint frame construction; recessed legs; and two layer upholstery foam. OPTIONS: Widths: 28 or 30 inches; Vinyls: All Sierra Doeskin colors; Accessories: Face re

Babee-Tenda Safety Table

The Babee-Tenda Safety Table is a safety feeding and play table designed for use by young children with parents who use wheelchairs. Height-adjustable, this product can be used as a "short" high chair for feeding and taking care of a child. This product converts for a number of uses including infant seat/carrier, bather, changing table, high chair, booster chair, swing, playtable, chalkboard, easel, utility table. The feeding table is designed so that the baby is surrounded by the table and ca

Bariatric Exam Table (Model Mdr746100)

The Bariatric Exam Table, model MDR746100, is a treatment table designed for use in clinical settings. This exam table is constructed with a welded steel base and frame, and has a motorized backrest, hands-free foot control, and a hospital grade plug. DIMENSIONS (HxLxW): 20 to 30 x 72 x 33 inches. CAPACITY: 600 pounds.

Bariatric Hi-Lo Treatment Table (Model 4795)

The Bariatric Hi-Lo Treatment Table, model 4795, is a powered treatment table designed for use by individuals with mobility disabilities or spinal cord injury. This treatment table has motorized height adjustment from wheelchair level, and a power backrest that adjusts from 0 to 75 degrees. Lifting/lowering is provided by two synchronized direct-drive lifts with hand controls. The table has a laminate frame and an extra-wide tabletop with a high-density urethane foam cushion and vinyl upholstery

Bariatric Tilt Table (Model 6045-709)

The Bariatric Tilt Table, model 6045-709, is a powered tilt table designed for use in physical therapy. A heavy-duty electric motor controls the table's angle of tilt from 0 to 90 degrees. The table has a tilt indicator display and can be operated from either side with hand controls. It has a heavy-duty steel frame, vinyl upholstery, thick high-density foam padding, three extra-long safety straps, and locking casters. POWER: Uses 110V. DIMENSIONS (HxLxW): 33 x 77 x 34 inches. The footboard is 18

Bariatric Treatment Table (Model 4086)

The Bariatric Treatment Table, model 4086, is a treatment table designed for use in physical therapy. This bariatric treatment table has six high-pressure laminate legs, a plywood sub-top, and a full-width laminate shelf. The table top is cushioned with high-density urethane foam with vinyl upholstery. DIMENSIONS (HxLxW): 26 x 78 x 30 inches. Clearance under the shelf is 4 inches. The foam padding is 2 inches thick. COLORS: Vinyl upholstery is available in black, burgundy, deep wine, dove gray,

Bariatric Wheelchair (Models W35795, W35795, & W35797)

The Bariatric Wheelchair is an adult manual wheelchair designed for use by obese individuals with mobility disabilities or spinal cord injury. FRAME: Features double square crossbraces with twin struts and reinforced and gusseted 5/8 inch rear axles. SEAT (WxD): The seat is available in 26 x 20 inches (model W35795), 28 x 20 inches (model W35796), or 30 x 20 inches (model W35797). The seat to floor height is 18 inches. UPHOLSTERY: Nylon upholstery with triple Tirtilene seat liner for added supp

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Bobath Extra Wide Hydraulic Therapy Couch

The Bobath Extra Wide Hydraulic Therapy Couch is designed for use by therapists working with children with various neurological impairments such as cerebral palsy. It can accommodate both the therapist and child on the couch. Bobath Therapy Couches can be used in clinics, hospitals and medical centers offering Bobath therapy. It is available in both electric and hydraulic versions. POWER: Examples: Hydraulic. DIMENSIONS: Maximum couch height: 1000 millimeters (39 inches), Minimum couch height:

Brewer Access Exam Table (Models 5000 & 5001)

The Brewer Access Exam Table, model 5000 and 5001, is an accessible medical examination table designed for use by individuals with mobility disabilities. It has a large, adjustable 4-leg step, and a pneumatic backrest for positioning. The table has multi-density, bolstered support upholstery with a seamless surface for cleaning; extendable, adjustable stirrups; leg extension; a plastic debris tray; front and side storage compartments; a paper roll holder; and hospital grade power outlets. The pa

Brewer Access High-Low Exam Table (Model 6500)

The Brewer Access High-Low Exam Table, model 6500, is a powered elevating examination table designed for use by seniors or individuals with mobility disabilities. Its low height and power back facilitate safe transfer to and from a wheelchair. This exam table rises and lowers at the using a powered system with a button controller, reducing strain on caregivers. There are 4 safety override switches. The upper end of the table is raised like a chair to provides back support during consultations an

Buffalo Tilt Table

The Buffalo Tilt Table is designed for therapeutic use with children and adults with mobility disabilities. This table can be used for prone or supine standing, as a tilt table for therapy, or for postural drainage. This unit features a steel frame with vinyl powdercoat finish, a solid wood body support covered in vinyl, trunk and head extensions, lateral supports, a back support, pommel, knee and heel supports, a tray, and a motorized assist, and casters for mobility.

Cardon Treatment Table

The Cardon Treatment Table (CTT) is a height adjustable treatment table with tilting head and leg sections. The table has an adjustable head and lower limb section with a fixed center section, allowing patients to be placed in the most effective position. The head section drops 90 degrees and rises to 85 degrees, while the lower limb section can be raised 90 degrees. There is a positive locking system for head section adjustments and a gas spring for lower limb section adjustments. The head sect

Cedar-Black Ada Picnic Table (Model 07Ey1148)

The Cedar-Black ADA Picnic Table, model 07EY1148, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. Made of recycled plastic, this long table has space for a wheelchair at each end. The table top and seats are slightly grained for a cedar wood appearance. DIMENSIONS (HxLxW): The tabletop is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 358 pounds. COLORS: The top and seat are cedar-colored and the frame is black. D

Circumductor Table (Model 620)

The circumductor table is designed for a full range of muscle training for metacrapophalangela joints and knuckles, wrist circumduction and pronation and supination of arms. The circumductor table is equipped with bracket support that six pulleys above the table and weights beneath for finger flexion, abduction and adduction. All metal parts are electroplated, the wood is grain laminated with a scratch resistant top and a natural finish. DIMENSIONS: 24 x 36 x 29 inches high. WEIGHT: 2.5 pounds.

City Round Pedestal Wheelchair Accessible Picnic Table

The City Round Pedestal Wheelchair Accessible Picnic Table is designed for use by individuals who use wheelchairs. This round picnic table has three seats attached to the pedestal which can accommodate six adults. The table also has an opening to accommodate a wheelchair. The table top is thermoplastic coated and sits on a powder-coated steel pedestal. The table also has an umbrella hole. DIMENSIONS: Table is 30 inches high and the table top is 46 inches in diameter. The seats are (HxW) 18.25 x

City Square Picnic Table - Wheelchair Accessible (Model Pup358H-V)

The City Square Picnic Table - Wheelchair Accessible, model PUP358H-V, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has three attached seats with space for a wheelchair on the fourth side. It has a galvanized, powder-coated steel frame, with a high-gloss plastic coated table top and seats, and is portable/surface mounted. The table top has an umbrella hole. DIMENSIONS (HxLxW): The table top is 30 x 56 x 46 inches. The s

City Wheelchair Accessible Picnic Table - One End (Model Pup238H-V8S)

The City Wheelchair Accessible Picnic Table - One End, model PUP238H-V8S, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides and space for a wheelchair on one end. It is made from powder-coated galvanized steel, with plastic coating on the table top and seats, and has a portable/surface mount. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches and the seats are 18.75 x 72 x 12 inches. WEIGH

City Wheelchair Accessible Picnic Table - Two End (Model Pup238H-V8)

The City Wheelchair Accessible Picnic Table - Two End, model PUP238H-V8, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has an extended table top at both ends to allow access for two wheelchairs. The portable, surface- mounted table has two benches and is made from thermoplastic-coated steel with a powder-coated galvanized steel frame. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. THe seats

Class Desk With Adjustable Legs

The Class Desk with Adjustable Legs is a computer desk designed for use by individuals who use wheelchairs. Work surface heights can be altered as needs change and the work surface is available in a variety of widths. The desk features a hinged "Flip-Top" door that runs the full length of the work surface to provide access to cords and cables. The scratch-resistant work surface has a smooth, rounded front edge and a chair rail to prevent hardware from sliding off. OPTIONS: Adjustable CPU sling;

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Color Changing A2 Light Panel & Table Set

Color Changing A2 Light Panel & Table Set is a low level table designed for use for children 3 years and older with low vision, sensory processing deficits, fine motor, gross motor skill development. The light panel fits on top of a flat surface or table. The accompany table has fold out legs which lock into place with an Allen key. Folds flat for easy storage.

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Commercial Ada Concrete Table (Model Sw6012)

The Commercial ADA Concrete Table, model SW6012, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has seats on three sides with space for a wheelchair on the fourth side. There is an umbrella hole in the center. The table is made of steel-reinforced precast concrete with a smooth polish finish and Natura Stone seats and frames. DIMENSIONS (HxD): The table is 31 x 66 inches in diameter. The table top is 38 inches in di

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use a computer desk. With the purchase of a new wheelchair, the individual found that his existing desk was too high for comfortable use. Since the desk legs were mounted on square wooden blocks,the optimal height was determined and 50 millimeters was cut off the bottom of each block. TITLE: Helpful Adaptations. JOURNAL: TAD Journal. REF: Volume 26, Number 4, January 2007: p. 18. PAGES: 2 (including cover).

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use his computer from his wheelchair. A purchased self-assembly desk was modified to accommodate a powered wheelchair. Two 100-millimeter-high panels were added to the bottom sides of the desk to increase the height and enable the user to get his feet under the desk. A plywood panel was added across the back to strengthen it and the shelf below the desk top was removed. A U-shaped notch was cut in the keyboard surface

Computer Table

The Computer Table is an accessible table for wheelchair users. The table's height is 29 inches to accommodate a wheelchair, and has a tabletop made of 3/4-inch plywood with a teak veneer. A monitor shelf is included at the rear of the table, and the legs consists of a set of standard folding table legs which will not interfere with the wheelchair's wheels. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for wheelchair users who cannot use standard computer desks because they are too low to wheel

Computer Tables (Models Hcp-4800 & Hcp-6000)

The HCP-4800 & HCP-6000 are computer tables and workstations designed specifically for wheelchair users. The main work area can be adjusted with a hand crank in order to accommodate a variety of wheelchair heights. This mechanism has an internal braking system. There are additional side brakes to insure stability of the table during operation. The workstations will accommodate a microcomputer, a monitor, a printer, external disk drives, printer paper, an expanded keyboard, and other necessar

Concord Ada Picnic Table (Model 07Eg1030)

The Concord ADA Picnic Table, model 07EG1030, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides and space for a wheelchair on one side. The table top is hexagon-shaped, with an umbrella hole in the center. The table is made from 100 percent recycled plastic. DIMENSIONS (WxH): The table top is 41 x 31.25 inches. Seats are 9.25 x 19 inches. The umbrella hole is 2 inches in diameter. WEIGHT: 330 pounds.

Convert-Able Table

The Convert-Able Table is a height-adjustable tilt top work table designed for use by children and adults with mobility disabilities. This table features interchangeable snap-on table tops that allow it to be used for a variety of activities, such as reading and writing, art, and sensory stimulation. The height adjusts to enable a child in a floor sitter or an adult in a wheelchair or stander to use the table. Features include a powder-coated steel frame, four-dual locking casters, push-button

Crawford Wheelchair Accessible Picnic Table (Model Kspb6Gpicada)

The Crawford Wheelchair Accessible Picnic Table, model KSPB6GPICADA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides with space for a wheelchair on one end. The table top and seats are made from 100 percent solid recycled plastic boards with UV stabilized color. The galvanized steel frame has cross braces for additional support. Stainless steel assembly hardware is included. DIMENSIONS (HxLxW):

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Customized Table

CUSTOM ADAPTATION PURPOSE: To provide a customized table with a top level for a laptop computer and a lower slide-out lockable tray for a keyboard for persons with visual impairments, diabetes, and mobility disabilities who use a manual wheelchair. The table top and tray are made from plywood with pine surrounds, and the legs are solid maple. The legs have lockable casters so the table can be easily moved and stored when not in use. The tray slides back and forth in slots on either side, and i

Cut-Out Table And Foot Support

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with a work and play surface. Using an existing round table as a base, a removable square tabletop with a cut out in the center of each side was designed to be clamped on. Made of 18-millimeter (mm) thick MDF, the corners of the top were rounded and wooden cleats were fitted under each of the four sides. The cleats are turned and locked with T-bolts to secure the square top to the table. A platform of 9-millimeter plywood

Daessy Accessible Workstation - Double Surface Table

The Daessy Accessible Workstation - Double Surface Table is a height adjustable computer desk designed for use by individuals with mobility disabilities or spinal cord injury. This workstation has two independently height- adjustable surfaces with clear access underneath for a user seated in a wheelchair. The frame is made from welded, plastic-coated tubular steel, and the table surface is made from arborite laminated MDF board. OPTIONS: CPU bracket, double locking casters, front surface tilt an

Daessy Accessible Workstation - Single Surface Table

The Daessy Accessible Workstation - Single Surface Table is a height-adjustable computer desk designed for use by individuals with mobility disabilities, spinal cord injury, or low vision. The height-adjustable work surface makes this table accessible to a user seated in a wheelchair, while an optional keyboard surface allows users with low vision closer access to a monitor located on the main surface. The frame is made from welded, plastic-coated tubular steel, and the table surface is made fro

Deep Bodywork Table Iii

The Deep BodyWork Table III is a treatment table designed for use by therapists assisting persons with biomechanical exercises. Its features include: CableLock; face rest plates at both ends; an inverted truss support system; powder-coated stabilizer bars; three layer plush padding system; large, custom-made knobs for leg adjustments; and recessed legs. OPTIONS: Height Ranges: 18-26, 20-29, 23-33 & 25-35 inches; Widths: 27, 29, 31 & 33 inches; Vinyl: All styles and colors are available.

Deluxe Convalescent Recliner

The Deluxe Convalescent Recliner is a recliner chair designed for use by individuals who require support while sitting. This chair can be adjusted and locked in three positions: upright, with the footrest elevated, and fully reclined. It has a high back headrest, padded arms, and oversized casters. The large, molded plastic tray attaches to the arms, slide ajusts, and can be stored on the chair back. The cushions are covered in mildew resistant vinyl. A built-in moisture barrier prevents seepage

Deluxe Folding Personal Worktable

The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures

Desk And Television Cabinet

CUSTOM ADAPTATIONPURPOSE: To prevent children and adults with cognitive disabilities and poor impulse control from throwing the desk and television. Made of laminate for durability and ease of maintenance, this wall-mounted corner desk features a return on one side and a television cabinet bolted to the corner section. Wide support legs extend to the floor at either end and in the center. Loxson bolts anchor the desk to the wall and the cabinet to the desk. The cabinet is divided into two secti

Desktop Desk

The Desktop Desk is an adapted desk or table adapter designed for use by individuals with fine motor, orthopedic, or mobility disabilities. Placed on top of a table or other table-like surface, this lightweight, portable unit provides a large, stable writing surface with adjustable heights and angles. The unit's clear plastic, removable and erasable writing surface allows for templates to be used in writing practice or for tracing art. An accessory tray attaches to either side of the unit and pr

Diy Computer Desk

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself accessible computer desk for an individual with Amyotrophic Lateral Sclerosis (ALS). This do-it-yourself computer desk is adapted from Sauder assemble-it-yourself furniture. First, the bookshelf was assembled according to instructions and necessary for getting the proper measurements for the height needed for the desktop. The desktop was constructed from 30 by 30 inch sheet of ¾ inch plywood. The length of the desktop can be

E-Z Glide Series Adjustable Table Bases

The E-Z Glide Series Tables are accessible tables and adjustable-height work tables designed for people who use wheelchairs. The 1700 Series adjusts from child to adult height, the 1800 Series adjusts from standard to wheelchair height, and the 1900 Series adjusts from restaurant to bar height with a stop at standard wheelchair height. The E-Z Glide mechanism incorporates a patented design and gas cylinders to facilitate table adjustment. A knob adjustment allows the tables to change heights and

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Hi-Low Tilt Table (Model 9054)

The Electric Hi-Low Tilt Table (Model 9054) is a powered tilt and elevating treatment table. It features an upholstered top, three wide safety straps, and a walk off foot plate with safety tread. The table is powered by two heavy-duty electric motors to assure smooth adjustments. A single pneumatic hand control pendant provides safety and control for both vertical or horizontal positions. The horizontal height of the table top adjusts from 26 to 38 inches. Tilt can be adjusted from full vertical

Electric Tilt Table (Model 801E)

The Electric Tilt Table Model 801E is a powered tilt table with a 2-inch thick padded vinyl cover, footboard, and 3 adjustable safety belts. The top has a 90-degree tilt range. The table top is powered by a mini pac drive unit with an overload and over travel protector. A toggle switch activates the tilt. DIMENSIONS (LxWxH): The table is 78 x 22 x 23 to 32 inches. CAPACITY: Lift capacity is 300 pounds.

Electric Work Table (Model 4375)

The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv

Equity (Model 1317)

The Equity, model 1317, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individulas who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has laminate tops, anodized a

Equity (Model 4240)

The Equity, model 4240, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individuals who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has a laminate tops, anodized

Equity (Model 4830)

The Equity, model 4830, is a single-surface computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatme

Ergobasic (Models 9040, & 9050)

The ErgoBasic is a treatment table designed for use in therapeutic and clinical settings. These tables feature a tilt head and an Accelerator Pelvic Drop, and gas-powered spring height adjustment. Model 9040 has soft foam cushions and model 9050 has firm foam cushions. OPTIONS: Elevating pelvic section, an E-Z Tilt Headpiece, and RhinoHyde upholstery. DIMENSIONS: The height on all models adjust from 18 to 24 inches. COLORS: The staindard upholstery is available in eight standard colors and six o

Ergobench (Models 9020, 9030, 9000, & 9010)

The ErgoBench is a treatment table designed for use in therapeutic and clinical settings. These height-adjustable tables have unitized steel frames with a bottleneck shape, seamless cushions, multi-fit armrests, and a paper cutter/dispenser. Models 9020 and 9000 have soft foam cushions and models 9010 and 9030 have firm foam cushions. Models 9020 and 9030 have fixed head sections and models 9000 and 9010 have tilting head pieces. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height on all model

Ergolife Tablet Dining Table(Model Gc3-42)

The Ergolife Tablet Dining Table, model GC3-42, is a wheelchair accessible table designed for use in cafeterias or in family, common, activity or dining room settings in long term care facilities and hospitals. The table is pre-drilled so an optional tablet can be attached on any side for wheelchair access. Tops are available in solid hardwood, melamine, or high pressure laminate. The legs are heavy duty steel. DIMENSIONS (HxDxW): 29.5 x 42 x 42 inches. Custom heights are available.

Ergowave Intersegmental Table

The ErgoWave Intersegmental Table is a powered traction table designed for clinical use. This table covers all areas of the patient's spine with intersegmental traction every 13 seconds, while the ErgoWave roller pattern travels up the spine. Features include a welded steel frame, height-adjustable rollers, and a built-in storage shelf in the base. OPTIONS: Leg bolster pillow, head pillow, treatment mat, and a nose hole option. DIMENSIONS (HxWxL): 24 x 25 x 78 inches. The treatment area is 25 in

Evolution Desk With Adjustable Legs

The Evolution Desk with Adjustable Legs is a height-adjustable desk designed for use by individuals who use wheelchairs. This desk has adjustable legs that match the perforated steel panels with holes in one-inch increments. The work surface is covered with laminate which wraps around the full bullnose style front edge. OPTIONS: Flat panel monitor arm, adjustable CPU sling. DIMENSIONS(WxD): 36 x 30 inches, 44 x 30 inches, 48 x 30 inches, 60 x 30 inches, and 72 x 30 inches. The height adjusts fr

Examination Table For Physically Disabled Patients.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Patient examination table that lowers to allow independent transfer from a wheelchair. Describes an elevating examination table made of the top of an examination table and a used, electrically powered hydraulically lifting dental chair. The control botton is on the side of the table. SKILLS REQUIRED: Metalworking. Electrical. Welding. AUTHOR: Staas, W E; Muldowney, J T TITLE: Examination Table for Physically Disabled Patients JOURNAL: Archives of Physi

Extended Easel (Models Ee100, Ee100D, Ee200D, & Ee200S)

Extended easel functions as three different pieces of furniture. Floor easel is designed for child for long sitting activities. Raised book edge holds material at a 20 degree angle and also adjusts to a horizontal plane for play. Adjustable leg set converts floor easel into a portable desk adjustable from 21 inches to 27 inches in height. Capable of converting to horizontal setting. Intermediate size converts easel to a smaller desk 14 inches to 21 inches in height. The seat block converts floor

Extended Tray Easel

Extended easel tray has a 20 by 24 inch surface with a 14 1/2 inch cutout. Designed to interface with the TherAdapt Mini- or Primary Cube Chairs and the Mini-Prone Stander. Top adjusts to 30 degree angle. The large model is 28 inches wide by 23 inches deep with an 18 1/4 by 4 1/2 inch cutout. Three types of legs are available for both sizes: 9 to 15 inches high, 15 to 21 inches high or 26 to 32 inches high.

Extra Wide Bariatric Treatment Table (Model 4074)

The Extra-Wide Bariatric Treatment Table, model 4074, is designed for use in physical therapy. This table has an extra-wide upholstered top with extra-thick, high-density urethane foam for bariatric use. The table is constructed from reinforced oak and has three storage cabinets, each with laminate interiors, and one adjustable shelf. The storage cabinet doors have concealed, self-closing Euro-hinges. OPTIONS: Built-in digital scale with 600 pound capacity (model 595). DIMENSIONS (LxW): 78 x 34

Ez Care Height Adjustable Overbed Table (Model Ez-110550)

The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th

Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)

The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to

Fixed Height Ada Desk

The Fixed Height ADA Desk is a computer desk designed for use by individuals who use wheelchairs. The scratch-resistant work surface has a a smooth, rounded solid oak front edge and an oak chair rail to prevent hardware from sliding off. A hinged "Flip-Top" door runs the entire length of the work surface for access to cords and cables. A cable channel hides and protects cords and cables. DIMENSIONS (HxWxD): 32 x 44 x 30 inches. COLOR: The standard color combination is an oak work surface and pu

Flaghouse Height Adjustable Personal Worktable

The Personal Worktable is a height-adjustable work table designed for use by children and adults who use wheelchairs. It can be used as an accessible desk or small activity table. The table height is adjusted by turning the admustment knobs on the legs. DIMENSIONS(HxLxW): The height can be adjusted from 23 to 33 inches and the work surface measures 36 x 30 inches. COLORS: Maple finish laminate top with almond powder-coated base.

Flextable (Model A)

The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)

Flextable (Model B)

The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS

Flextable (Model C)

The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.

Flip-Up Table

CUSTOM ADAPTATION PURPOSE: To provide a mobile table that can be moved close enough to a person seated in an armchair to be used for eating or working. Elongate the crossbar of the base of a hospital bedside table to increase the width of the base to be slightly wider than an armchair. If necessary, lengthen the table's vertical support to adjust the table's height. MATERIALS: One hospital bedside table and additional tubing. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SI

Floor Style Powder Board Table (Model 7350)

The Floor Style Powder Board Table, model 7350, is a powder board designed for use in physical therapy. This table has smooth, light-colored top; four stationary legs; and a full frame. DIMENSIONS (HxLxW): 7 x 40 x 29 inches.

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor tray table designed for use with floor seat provides writing area with extra support. Tray table top is constructed of 12 inch by 16 inch plywood board. Side panels measure 12 inches by 12 inches. Softwood battens can be glued inside side panels about 1 1/2 inches from top of tray. Front edge of tray can be cut out to fit child. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, Englan

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Small floor table so a child can sit leaning against the wall or other furniture and play with other children who are playing on the floor. Table made of 12 by 24 inch plywood, with sides which allow the table to stand 10 inches off the ground and provide 2 inch edges, with a 2 inch edge along the front. A section can be cut out to allow the table to fit partly around the child's body. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make

Folding Wheelchair Table

The Folding Wheelchair Table is a height-adjustable tilt top work table designed for use by children and adults who use wheelchairs. Features include a chrome-plated steel frame and side braces to ensure stability and a laminated, scratch-resistant woodgrain surface. The table can also accommodate tilt tables and it folds for storage and transport. DIMENSIONS: The height adjusts from 29 to 44 inches. The top is 30 x 40 inches, and the top tilts up to a 45 degree angle.

Four Place Child Cut Out Table Kidney Shape (Model 354)

The Four Place Child Cut Out Table Kidney Shape, model 354, is a semi circular, kidney shaped table. The table features wood grain laminate, scratch resistant top and five legs for stability. The table accomodates seating for four children with amble space for each child to work. Also makes an excellent feeding station. DIMENSIONS (HxWxL): 24 x 29 x 96 inches; cut outs are 6 x 9 inch (1 each), 7 x 10 inches (2 each), and 8 x 12 inches (1 each).

Gazelle By R82

The Gazelle is a prone stander designed for use by children with mobility disabilities. Available in three sizes, this stander may also be used for postural drainage and as a tilting table with a variety of adjustments between 15 and 90 degrees. It features a Y-shaped base with four locking wheels, foot-pedal angle adjustment and a degree meter, height- and width-adjustable footrests, rear support, padded chest support, and padded knee supports. The leg rests are independently adjustable with ea

Generation Iv Adjustable Work Tables

Generation IV Adjustable Work Tables are height adjustable work tables designed to provide a completely accessible work station for individuals with a physical disability. These work tables are ideal in that they offer individuals a maximum design of flexibility and adjustability which includes working in a sitting or standing position. They are available as rectilinear or corner - bilevel or single surface tables. Bilevel tables allow you to adjust the height of the keyboard and the VDT height

Hand Therapy Station With Shelf Unit (Model 74-110)

The Hand Therapy Station with Shelf Unit, model 74-110, is a hand/wrist/forearm exercise table designed for use in therapy settings. The laminate top table comes with a detached three- shelf laminate storage unit. OPTION: Table without shelf unit. IMENSIONS (HxDxW): The table is 31 x 20 x 45 inches and the shelf is 30.5 x 20 x 20 inches. The laminate top is 1 1/8 inches thick. COLOR: Natural wood finish.

Hand Therapy Table (Model 561168)

The Hand Therapy Table, model 561168, is a hand/wrist/forearm exercise table designed for use in physical therapy. This therapy table is equipped with an adjustable crank hydraulic lift system for height adjustment. The laminated table top has front and back cutouts and the telescopic table legs are aluminum with a laminated base that has levelers. DIMENSIONS (HxLxW):26 to 38 x 48 x 32 inches. Table top cut out is 4 x 24 inches. The hydraulic life system adjusts height from 27 to 39 inches. CA

Hang Ups Inversion Table

The Hang Ups Inversion Table is designed for use by individuals with back pain. This table accommodates individuals from 4 feet, 10 inches to 6 feet, 6 inches tall and features a solid, wide-based frame for stability.Other features include hip guides, footrest with securing strap, and adjustable balance settings. The unit inverts when the user raises his or her arms above his/her head. The frame folds flat for storage and transport. A video and instruction book are included. DIMENSIONS (HxWxD):

Heavy Duty Mobile Adjustable Height Wheelchair Table (Model 375)

This adjustable height work table can accommodate both children and adults. Its features include a chrome plated steel frame, ball bearings, and 3-inch locking rubber swivel casters. It is equipped with side braces to assure stability. The table top is a wood grain laminated, scratch resistant surface. It can be used with wheelchairs and tilt tables. DIMENSIONS: Height adjusts from 26 to 34 inches, the top is 30 x 36 inches with a 5 1/2 x 20 inch cut out, the top tilts to a 45 degree maximum.

Heavy Duty Treatment Tables

Therapy treatment tables with wood frames and upholstered tops. Available in several 30 inch height models. Standard treatment table has optional H brace, upholstered shelf, or divided shelf and is available in 24, 27, or 30 inch widths and 72 or 78 inch lengths. All models have leg levelers. Legs and frames are solid oak, cabinets are oak plywood. Table tops have extra firm polyurethane foam cushion, upholstered with Uniroyal naugahyde. Optional accessories: drawers, upholstered arm board or pi

Height Adjustable Table

The Height Adjustable Table is a height adjustable work table designed for use by individuals with low vision for comfortable viewing of a video magnfier/CCTV. This wide table offers space for moving a CCTV viewing tray while holding papers and other materials. DIMENSIONS (LxWxH): 24 x 48 x 22.5 to 32 inches.

Height Adjustable Treatment Table (Model 852)

The Height-Adjustable Treatment Table, model 852, is a height adjustable treatment table designed for use in therapy. The table has hydraulic cylinders on all four legs to raise the table top. It also has non-skid adjustable feet, a powder-coated steel frame, and vinyl upholstery. OPTIONS: Storage shelf (model 852S). DIMENSIONS (HxLxW): 25 to 34 x 72 x 28 inches. CAPACITY: 400 pounds. WEIGHT: 174 pounds. COLOR: The upholstery is available in a choice of eleven standard colors and eleven optional

Herman Miller Scooter

The Herman Miller Scooter, model FD830, is a height adjustable tilt desk designed for use as a keyboard holder or desk by people with physical disabilities. This desk is designed to fit over the lap of the user and adjust to the optimal height and angle for working comfort. The sculpted cherry top features a divided lip to keep books and papers from sliding and a slight center indentation to allow the desk to fit over the lap. The top can be used flat or be angled using the lever beneath it. Th

Hexagonal Picnic Table - Wheelchair Accessible (Model Ohtha)

The Hexagonal Picnic Table - Wheelchair Accessible, model OHTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This six-sided table has space on one side for a wheelchair. The frame, seats, and table top are made from 100 percent recycled plastic, with stainless steel hardware. The table also includes an umbrella hole. DIMENSIONS (HxW): The table top is 30.5 x 40 inches. The seats are 17.5 x 9.5 inches. The umbrella hole is 2 inche

Hi Lo Ot Work Tables

Adjustable height occupational therapy work table. Available in hydraulic model with foot or hand operated actuator. Adjustable height from 29 to 41 inches, self brakes at any level. Top is 48 by 60 inch oak butcher block surface. Base is 32 inches long by 20 inches wide by 1 1/2 inches thick.

Hi-Lo Multi-Position Table (Model 6052)

The Hi-Lo Multi-Position Table, model 6052, is a powered treatment table designed for use in physical therapy. This height-adjustable tilt table may be used in a variety of treatments, including lateral flexion and postural drainage. The motorized height adjustment lowers the table for wheelchair access. The three-section top features nose cut-outs with plugs in both the head and leg/backrest sections. The head and leg/backrest sections have positive lock-in levers. The head section raises manu

Hi-Lo Tilt Table (Model 6058)

The Hi-Lo Tilt Table, model 6058, is a powered tilt table designed for use by individuals with mobility disabilities or spinal cord injury. This wheelchair-accessible tilt table has an electric motor that lowers the table for transfer by wheelchair users. The table tilts from a horizontal position to a 90-degree angle at a fixed speed of 4 degrees per second. The padded top is upholstered in vinyl, and has three extra-wide safety straps with hook-and-loop closures. The table has a heavy-duty ste

High Low Treatment Table

Powered adjustable height treatment table with 30 inch raising back section, wooden base with one drawer, and storage shelf between pedestals. Foot pedal operated actuator raises and lowers table. Adjustable height 23 to 35 inches. Top section is 78 inches long and 27 to 30 inches wide. Made of solid oak and oak plywood. Table top has extra firm polyurethane foam cushion, upholstered with Uniroyal naugahyde. Options: upholstered arm board or pillow, and paper holder and cutter.

Horseshoe Therapy Table

The Horseshoe Table is a wheelchair-accessible manual height adjustable therapy table designed for clinic use. The Horseshoe-shaped table accommodates up to four users in wheelchairs and is equipped with seven height-adjustable metal legs and a plastic-laminated top with a cutout. DIMENSIONS: The cutout is 30 x 36 inches and the height adjusts from 26 to 34 inches.

Individual Cut Out Table (Model 300)

The adjustable offset legs of this cut out table allows patient to sit almost in the center of the table. The cut out table can be adjusted for both sitting and standing patients and can be used with standing stabilizers. An attached door which swings out or down can lock the patient safely in place. The table is made of wood grain laminate and has scratch resistant top. DIMENSIONS: Height adjusts 21 to 33 inches, top size is 24 x 30 inches with cut out 7 x 10 inches. Adult, child and pediatric

Individual Tilt Work Table (Model Pc 5358-02)

The Individual Tilt Work Table, model 535802, is a height adjustable, accessible tilt-top work table designed for use by people who use wheelchairs. The manual crank adjusts the height of the telescoping legs and the top tilts to any angle between 0 and 50 degrees to accommodate tasks and individuals. The unit includes the table and a tray/shelf extension with a cut out. DIMENSIONS: The tabletop is 35 x 24 inches and the tray attachment is 11 inches. The height adjusts from 22 to 30.5 inches.

Infinity 7236

The Infinity 7236 is a powered elevating therapy table designed for use in therapy settings. This height-adjustable table has a laminate top with PVC edging. Height adjustment is accomplished using the push-button controls and the lift mechanism can lift up to 400 pounds. The table seats six to eight individuals, including wheelchair users. POWER: Uses standard current and includes a hospital-grade plug. DIMENSIONS: The height adjusts from 26 to 38 inches and the table surface is 72 x 36 inches.

Infinity Series (Models 6030, 4830, & 6024)

The Infinity Series, models 6030, 4830, and 6024 are computer work centers and height adjustable work tables designed for use by individuals who use wheelchairs. The motorized height adjustment is activated with a push button and also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatments, casters, plastic glides/levelers, under desk com

Infinity Treatment Table (Model 6030 & 8436)

The Infinity Treatment Table, model 6030, is a powered elevating treatment table designed for use in therapy settings. The height-adjustable table features a permanently attached treatment mat of bacteria-resistant reinforced vinyl covering over high-density polyurethane foam, and push-button height adjustment. The lower heights facilitate transfers, while the higher levels accommodate treatment. POWER: Uses standard current and includes a hospital-grade plug. DIMENSIONS: The table has a height

Jobri Mobile Desk Caddy (Model F7300-Xx)

The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31

Kaye T-Tables (Models Tt-1 & Tt-2)

The Kaye T-Tables are tilt top tables designed for use with children with neurological or fine motor disabilities. Designed to be used in conjunction with Kaye Adjustable Benches, T-Seats, or Straddle Seats, these height-adjustable wooden tables have tilt tops equipped with tow large wooden clamps to properly psition books and papers and a removable wooden ledge to keep items from sliding off the table when tilted. The table top adjusts from horizontal to 90 degrees. Model TT-2 accommodates chil

Liberty Adjustable Desk

The Liberty Adjustable Desk is an accessible computer desk designed for use by individuals who use wheelchairs. This height-adjustable desk has a metal frame, legs, and rear modesty panel. The scratch-resistant laminate work surface has a solid oak smooth, rounded front edge and a rear oak chair rail to prevent computer hardware from sliding off. This desk also features a hinged "flip-top" door that runs the full length of the work surface for access to the cable channel. The desk is available

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Making A Wheelchair Worktable.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Accessible height table with body cutout for wheelchair users. Wooden table with legs high enough to clear a wheelchair. Body cutout to allow person to get closer to work. Backboard and sideboard help prevent things from falling off the back of the table. Instructions includes dimensions and how to secure the legs. Includes drawings. SKILLS REQUIRED:Simple woodworking. TITLE: Home Improvement and Repair: Special Purpose Rooms REF: Book: Time Life Books

Manual Height Adjustable Work Table (Model 8858A)

The Manual Height Adjustable Work Table, model 8858A, is an accessible table or workstation designed for use by individuals who use wheelchairs. Made with double pedestals to accommodate wheelchair users, the table height adjusts by means of a fold-away hand crank extending from the pedestals. The table features a wide laminate top that allows for extra work space. OPTIONS: Maple, formica, or steel table tops are available. DIMENSIONS: The top is 36 x 60 inches and the height adjusts from 26 to

Manual Height-Adjustable Activity Table

The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches.

Manual Tilt Table (Model Nk 680)

The Manual Tilt Table, model NK 680, is designed to allow an individual to be placed in a tilted position at angles from 0 to 90 degrees, indicated by a protractor. The table is manually operated by the use of a lare Acme screw rod and has a steel frame and an enamel finish. The top has a foam pad covered in naugahyde and the footboard has a nonslip covering. Three restrainer straps with Velcro closures are included. An Extra Wide Model (NK 686) and a Low Boy Tilt Table (NK 685), which is design

Marathon Table

The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus

Marsh Handicap Furniture

Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.

Med I

Accessible all purpose table has nickel chrome legs with twin wheel casters, 2 locking and 2 nonlocking. One piece molded top has slate look finish; measures 24 inches by 36 inches. Has 5 adjustable leg heights from 27 inches to 33 inches. Available in standard colors; custom colors extra.

Med Ii, Med Iie, Med Iif.

Accessible U shaped activity table. One piece molded fiberglass top is 18 inches wide with slate look finish. Available in standard colors; custom colors extra. Outer measurements are 72 inches wide by 48 inches deep; inner measurements, 36 inches wide by 30 inches deep. Med II has twin wheel casters, 2 locking and 3 nonlocking; five leg height adjustments from 27 inches to 33 inches. Med IIE has telescoping legs held in position with thumb screws; legs are equipped with plastic end caps. Med II

Med Iii Adapted Oval Patio Table

Accessible table. Adapted oval patio table accommodates 4 wheelchairs between 4 attached stationary seats. 14 gauge tubular steel frame and legs have zinc and dry powder coating. Stain and heat resistant. Optional built in umbrella mount. Table available in standard colors; custom colors extra. Umbrellas available in matching colors. Maximum width 69 inches; maximum length 78 inches; 31 1/2 inches between stationary seats.

Med Iv Dining And Activity Table

Four place dining and activity table accommodates wheelchairs with elevated leg rests. Wheelchairs may be staggered or placed all on one side. Nickel chrome legs have twin wheel casters, 4 locking and 2 nonlocking. One piece molded top is heat and stain resistant; measures 104 inches by 20 inches; has slate look finish. Leg height adjusts to 27 inches, 28 1/2 inches, 30 inches, 31 1/2 inches or 33 inches. Available in standard colors; custom colors extra.

Midland Adult Size Manual Tilt Table

The Midland Adult-Size Manual Tilt Table is designed for use with individuals with mobility disabilities. Made of standard durable construction, this table tilts vertical to horizontal with an easy-to-turn crank that is angled to provide leverage for maximum lifting efficiency. Made of standard latex free durable construction, the table features three positioning straps for added security when raising clients and removable stainless steel footboard to provide client comfort and add vertical posi

Midland Child / Adult Combination Work Table (Models 7082)

The Midland Child/Adult Combination Work Table is a height adjustable tilt top work table with a cut out designed for use by children and adults who use wheelchairs. The table features a rimmed maple tabletop that tilts to any angle up to 45 degrees and a tubular steel frame on a U-base with locking swivel casters. Model PC 7082 ($1349) is crank-adjustable. DIMENSIONS: The table surface is 26.5 inches square and the height adjusts from 24.5 to 31 inches. The casters are 3 inches in diameter.

Midland Child-Size Manual Tilt Table (Models Pc 7193Cb/cbl/cbr/cd/cfg/cg/cib/cm/cn/cs)

The Midland Manual Tilt Table is a child-sized tilt table designed to assist with upright positioning and balance. The device consists of a tubular steel frame with a padded table. The urethane coating resists chips and scratches Other features include three padded restraint safety belts, four locking casters, and a washable, removable footboard. DIMENSIONS: Table top is 24 x 60 inches; table height when horizontal is 24 inches. WEIGHT: 168 pounds. COLORS: Colonial Blue (PC 7193CB), Black (CBL),

Midland Combination Work Table (Model 7081)

The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches.

Midland Electric Tilt Table

The Electric Tilt Table is designed for use with individuals with mobility disabilities. This table tilts from zero to 90 degrees using a hand-held controller. Standard features include removable foot board, locking casters, and three restaining straps. Other features OPTIONS: Work tray. DIMENSIONS: The surface is 28 x 78 inches; table height when horizontal is 33 inches. The base is 57 x 33 inches .The casters are four inches in diameter. The straps are four inches wide. CAPACITY: 300 pounds

Midland Manual Tilt Table (Models 7195/b/bl/g/b/m/n/s/t)

The Midland Manual Tilt Table, models 7195/B/BL//G/B/M/N/S/T, is a manual tilt table designed for use in physical therapy. The table consists of a tubular steel frame, padded table with a cream-colored urethane coating to resist chips and scratches, and three padded restraint safety belts. The table frame is mounted on four 4-inch casters, two of which have brakes. The table tilts from vertical to horizontal with a hand crank. The indicator displays the angle of tilt from 0 to 90 degrees. The ta

Midland Round Work Table (Model 8859F)

The Midland Round Work Table, model 8859F, is a height adjustable, swivelling work table designed to accommodate up to four wheelchair users. The table features a solid wood butcher block top on a metal pedestal with a hydraulic lift mechanism. DIMENSIONS: The height adjusts from 27.5 to 34 inches and the top is 48 inches in diameter. The base is 24 inches in diameter.

Midland Wheelchair Work Table (Model 7080)

The Midland Wheelchair Work Table, model 7080, is an adjustable height tilt top table designed for use by individuals with mobility disabilities. This table has a chrome plated steel frame and swivel casters fitted with step-on brakes. The table fits over any wheelchair. The Formica tray has a raised rim, and tilts to a 45-degree angle. Table is latex free. DIMENSIONS (HxLxW): 28 to 39 x 32 x 36 inches. Cutout is 22 x 6 inches. Base measures 34 inches in width and 26 inches in depth.

Mobile Dining Table

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with multiple sclerosis to transport meals and eat comfotably in a small apartment. A rolling table was built from melamine coated wood that fit comfortably in the space between the living room and the kitchen. The table has two shelves beneath the eating surface, one accessible from both sides and the other from the kitchen side only. Designed to be easy to clean and move, the table is equipped with four double-wheeled furniture c

Mobile Hand Therapy Table (Model 74-10S)

The Mobile Hand Therapy Table, model 74-10S, is a hand / wrist / forearm exercise table designed for use in physical therapy. This height- adjustable table has a laminate top and removable casters. The legs have spring-loaded height adjustment with two hand control levers. DIMENSIONS (HxLxW): 28 to 43 x 32 x 24 inches. The table top is 1 1/8 inches thick. COLOR: Gray top with chrome base.

Model 100 Workstation

The Model 100 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs.The unit features a steel frame, a height-adjustable worksurface, an EasyRoll wheelchair platform, and a ramp. This desk is available with either manual hand crank or a motorized height adjustability of the worksurface. Hand crank models have a foldable hand crank (.5 inches of adjustment per revolution) and the motorized models have push button controls. The works

Model 200 Workstation

The Model 200 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs. The unit features an aluminum frame, a fixed height worksurface with a backsplash, an EasyRoll wheelchair platform, and a ramp. The worksurface is made from plywood with WilsonArt plastic laminate. The ramp and platform are covered in nonskid rubber. The workstation includes an EasyRoll wheelchair platform, which allows the user to move laterally for the length of t

Multi-Purpose Table

The Multi-purpose Table is designed to provide eating and work space for individuals who are in bed for extended periods or who require a mobile work surface. This height-adjustable table can be used over chairs or bed and features a wipe-clean Formica top that can be used flat or tilted up to 180 degrees and a wooden T-shaped base with three casters. DIMENSIONS: The height adjusts from 29 to 38 inches. The table surface is 25.5 x 14.5 inches. WEIGHT: 25 pounds. COLOR: Woodgrain top.

Multiple Place Cut Out Table (Model 6254)

Table with 4 cut outs to provide individualized table work space for 4 children. Height adjusts from 23 to 36 inches. 2 cutouts are 8 inches by 13 inches and 2 cutouts are 8 inches by 16 inches. Overall size is 96 inches long and 30 inches wide. Tabletop is heavy duty plastic. Useful for children in wheelchairs for sliding chairs close to table.

My Place Laptop Table

The My Place Laptop Table is a notebook or laptop computer support and bookholder designed for use by individuals with mobility or upper extremity disabilities. This lightweight work station can be used while seated in a chair or reclining in bed for writing, using a laptop, reading, doing crafts and more. It has fold-out legs, which adjust to set the tabletop at the optimal height. The tabletop has two panels, the angle of which is independently adjustable. The left panel is designed to hold th

Nova Iii

The Nova III is a treatment table designed for use by therapists assisting persons with biomechanical exercises. Its standard features include: Cable Lock; a triple layer plush padding system; face rest plates at both ends; and power-coated stabilizer bars. OPTIONS: Height Ranges: 18-26, 20-29, 23-33 & 25-35 inches; Lengths: 69 or 73 inches; Widths: 24, 27, 29, 31 & 33 inches; Vinyls: All styles and colors are available. CAPACITY: 550 pounds. WEIGHT: 29 inch wide table - 31 pounds. WARRA

Nova Light

The Nova Light is a treatment table designed for use by therapists assisting persons with biomechanical exercises. Its standard feature include: CableLock; two layer padding; arm rest plates on both halves; face rest plates at both ends; a folding arm rest shelf; QuickLock arm rests; Quicklock Face Rest II; and powder-coated stabilizer bars. OPTIONS: Vinyls: All Sierra Doeskin colors are available; footrest. CAPACITY: 550 pounds. DIMENSIONS: 23-33 x 69 x 24 inches. WEIGHT: table weighs 24 pounds

Oriental Bodyworker

The Oriental Bodyworker is a treatment table designed for use by therapists assisting persons with biomechanical exercises. Its standard features include: CableLock; face rest plates at both ends; powder-coated stabilizer bars; and the option of folding the table flat on the floor. OPTIONS: Height Ranges: 18-26, 20-29 inches; Lengths: 73 inches; Widths: 31 & 33 inches; Vinyls: All styles and colors are available. CAPACITY: 550 pounds. WEIGHT: 31 inch table - 33 pounds. WARRANTY: Five years.

Over-Chair Table

CUSTOM ADAPTATION PURPOSE: To enable an individual with Parkinson's disease to engage in a variety of activities while seated in his recliner. The customized table has a large plywood base that fits under the chair and is held in place by the weight of the chair. The chair's castors slot into small holes in the base, holding both the chair and the table completely stable. A post with a spring-loaded carriage that moves up and down from a gym set was mounted to the base. The table support was br

Overbed Table

The Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a wipe-clean laminate top with a built-in cup holder, and a C-frame base with four swivel casters. It can be converted for either right-hand or left-hand use. DIMENSIONS: The height adjusts from 28.25 to 42.25 inches. The table surface is

Pediatric Adjustable Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table which can be folded against the wall and can be adjusted in height from 18 1/2 to 32 1/2 inches so it can be used by children and adults. Describes hinged table which moves up and down a track on a backboard on the wall. The table can be adjusted by one person. Includes a drawing and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Rousseau, Y TITLE: Pediatric Adjustable Table JOURNAL: Canadian Journal of Occupational Therapy REF: Vol 51 no 3,

Pediatric Table (Models 840 840C, 840D, & 840S)

The Pediatric Table, model 840, is a treatment table designed for use in therapy for children. The table features adjustable leveling feet, dual density foam, heavy gauge expanded vinyl upholstery, and smooth side guards with non-porous T-molding. The retaining walls feature a measuring tape and color decals. Model 840S includes a shelf, model 840C has a built-in cabinet, and model 840D has built-in drawers. DIMENSIONS (HxLxW): 39 x 42.5 x 29.5 inches. CAPACITY: 400 pounds. WEIGHT: 86 pounds.

Perfoma Adjustable Group Therapy Table (Models A370-520, A370-522, A370-524, & A960-72)

The Citadel Adjustable Group Therapy Table is a manual height-adjustable therapy table designed for clinical use. These tables feature height adjustability using a fold-away hand crank, high-pressure laminate tops with radius edges to eliminate sharp edges, and extruded telescoping legs. OPTIONS: Comfort recess. DIMENSIONS: The height adjusts from 27 to 39 inches. The top on model A370-520 is 36x 72 inches. The top on model A370-522 is 30 x 60 inches. The top on model A370-524 is 36 x 48 inches.

Performa Adjustable Hand Therapy Table With Comfort Recess (Model A370527)

The Performa Adjustable Hand Therapy Table with Comfort Recess, model A37052 is a hand/wrist/forearm exercise table designed for clinical use. This center-pedestal table has an X-shaped base. Standard features include a comfort recess design for ergonomic positioning and internal gas spring assisted height adjustment. OPTIONS: Casters. DIMENSIONS: The top is 36 x 36 inches, the base is 30 x 30 inches, and the height adjusts from 24 and 36 inches.

Performa Five-Section High / Low Tables (Model 500 & 550)

The Performa Five Section High/Low Tables, models 500 and 550, are powered elevating treatment tables designed for use in therapeutic and clinical settings. These tables feature elevating steel frames, power-assisted casters for ease in maneuverability that lock during treatment, and contoured foam face cushions with slow-recovery foam. PermaBLOK3 vinyl coating on the cushioned surface provides a barrier against germs, abrasions, and stains, as well as guarding against mold, mildew, or fungus. H

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Picnic Tables (Wct8 Series)

Accessible picnic table. Tubular galvanized steel frame. Wooden or anodized aluminum top and seats. Tabletop extends out 12 inches on each end. DIMENSIONS: 8 feet x 4 feet 9 inches x 31 inches high. WEIGHT: 184 pounds.

Picture Frame Restoration Workstation

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to restore picture frames without bending or lifting. The custom-designed workstation consists of a worktable that includes a separate revolving grid that provides an indexed tilting mechanism and 350-degree rotation. This provides the user full appropriate positioning of the frame without the need to bend over the table or lift. The table accommodates a standing worker and a height-adjust

Plaza Pedastal Square Picnic Table - Wheelchair Accessible (Models T46Rcped-3S & T46Rcped-3Sm)

The Plaza Pedestal Square Picnic Table - Wheelchair Accessibleis a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame, with table tops and seats made of plastic-coated steel. The table top has a hole for an umbrella. Model T46PED-3S is designed for in-ground mounting, and model T46PED-3SM is designed for surface mo

Plaza Square Picnic Table - Wheelchair Accessible (Model T46Rcpedpor3)

The Plaza Square Picnic Table - Wheelchair Accessible, model T46RCPEDPOR3, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This portable table has three seats, with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame with a plastic-coated steel table top and seats. The table top features an umbrella hole. DIMENSIONS (HxLxW): The table top is 31 x 46 x 46 inches. The seats are 18 x 38 x 10.5 inches.

Plynth, The (Models 6484 & 6485)

The Plynth is a treatment table designed for clinical use.These tables feature a powder-coated welded steel frames and high-density seamless cushions covered in Naugahyde. Both models have a shelf under the table area, manual elevating head sections, and a face opening. Model 6484 is a two-section model and model 6485 is a three-section model. OPTIONS: RhinoHyde upholstery. DIMENSIONS: Model 6484 is 28 x 76 x 30 inches and model 6485 is 28 x 75 x 30 inches. COLOR: The frame is white and the stan

Portable Achievement Carrel (Model 903A)

The Portable Achievement Carrel, model 903A, is a desktop study carrel designed for use by children with communication, learning, or behavior disabilities. This portable carrel creates a semi-private tabletop space to help students concentrate on their work by controlling their surroundings, including the visual environment, light, and sound. The carrel has a back panel and two side panels with optional windows, an angled work surface with an 18-degree slope, a reading easel with a dry erase sur

Portable Changing Table For Older Children

CUSTOM ADAPTATIONPURPOSE: To provide a changing table for children ages 5 to 9 with incontinence who are too big for a regular changing table. The table base is a rectangular piece of medium-density fiberboard, 145 centimeters (cm) X 75 cm. Four pieces 19 millimeter (mm) plywood, 12 cm high, are attached to the edges of the table base to form a box into which a vinyl covered 70 mm foam mattress is placed. Collapsible legs, 85 cm high, are attached to the bottom of the table base. 10 cm leg exten

Portable Treatment Table (Model 6018)

The Portable Treatment Table is designed for home or professional use. This folding unit has metal legs, a padded upholstered surface, and carrying handles. DIMENSIONS (WxLxH): 24 x 72 x 28 inches. The table folds to 24 x 36 x 5 inches. CAPACITY: 300 pounds. WEIGHT: 28 pounds.

Positioning Table

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. This table is designed to provide the child with proper postural positioning while allowing the child to concentrate on eating, playing, or educational activities while at the table. The table was made of plywood to dimensions specified by the child's therapist and provides space for two children. The table is height adjustable and has a torso cutout at one end to provide the child with close ac

Powder Board (Model 767)

The powder board is of sturdy design to be for hand and arm exercises to increase full range of motion. The metal legs collapse for storage. DIMENSIONS (WxLxH): 29 x 40 x 9 inches when the legs are extended.

Powder Board (Model Sw24)

Exercise board. Laminate top is 30 inches by 40 inches. Wooden legs are 7 inches high when extended and fold to 2 inches high.

Powder Board Table (Model 75-23K)

The Powder Board Table, model 75-23K, is a height abjustable therapy table designed for use in physical therapy for individuals with upper extremity disabilities. This table has a high- pressure laminate top with edge bumpers. The height adjustable legs have self-indexing spring-loaded plungers and height indicator strips. OPTIONS: 3.5-inch locking dual wheel casters. DIMENSIONS (HxLxW): 26 to 34 x 63 x 40 inches. COLOR: White, maple, gray, or natural table top.

Powder Table (Model Sw22)

Exercise table or powder table with curved recess for close approach of user. Adjustable height from 22 to 38 inches. Laminate top is 36 inches wide by 60 inches.

Precast Concrete Round Table - Wheelchair Accessible (Model Rotsh)

The Precast Concrete Round Table - Wheelchair Accessible, model ROTSH, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has three seats with space for a wheelchair on the fourth side. It is made of steel-reinforced concrete with a smooth base and a polished table top and seats. OPTIONS: Umbrella hole. DIMENSIONS: The table is 30 inches high with an outside diameter of 56 inches. The table top diameter is 38 inches. Th

Professional Hi-Low Mat Table (Model 9600 Series)

The Professional Hi-Low Mat Table, 9600 series, is a powered elevating treatment table featuring a clean and quiet electrical power source that raises and lowers the table quickly and effortlessly. The foot control is standard with an optional hand control. This spacious exercise area is supported by a heavy duty black and chrome steel base that prevents tipping and wobbling. Both the upholstered tops and the optional accessory mats are polyurethane foam covered with nylon reinforced Herculite 2

Professional Hi-Low Treatment Table (Model 4050, 4070, & 4090)

The Professional Hi-Low Treatment Table is delivered completely assembled and ready to use. It is equipped with a foot controlled vertical electro-mechanical drive that offers a smooth and quiet operation. This full size table is constructed of solid wood with a natural finish; a walnut finish is optional. A thermal overload protector, UL hospital grade plug and power cord 120 inches long are included. The table top is upholstered with foam covered Naugahyde. Models 4070 and 4090 both the have

Professional Iii

The Professional III is an electrical treatment table designed for therapists assisting persons with biomechanical exercises. Composed of a maple veneer base with an environmentally-safe lacquer finish, this table is designed especially for spas, salons and clinics. It offers the therapist cordless twin toe switches on either side of the table for height adjustment, providing better ergonomics. It also features face rest plates at both ends and two storage shelves beneath the table. OPTIONS: Cus

Professional Tilt Table/electric (Model 9505)

The Professional Tilt Table/Electric, model 9505, is powered by a quiet, heavy duty electric motor of 115 VAC, 2.7 AMPS that assures smooth, vibration free adjustment. The table top is 32 inches high and upholstered with black vinyl. It is equipped with a pneumatically activated hand held pendant that provides safety and control on either side of the table and comes with a 84-inch cord. Additional features include: chrome plated frame, welded steel construction, three wide safety straps, easy ro

Professional Tilt Table/manual (Model 9500)

A manually operated, heavy duty chrome plated, welded steel constructed tilt table that rotates from full vertical to 12 degrees below the horizontal position, with a black vinyl top. The table is 32 inches high. Other features of the tilt table include: heavy duty gears and bearings, a retractable adjustment handle, three wide safety straps, easy roll semi-pneumatic casters for shock absorption, four 4-inch swivel casters with step-on brakes. COLORS: Black, space blue, regimental blue, blue rid

Pulley Bench

The Pulley Bench is an exercise bench designed for use in rehabilitation treatment of the shoulder and thoracic region. This highly adaptable bench assists in isolating specific muscle groups. It can be used as a flat bench or with adjustable upright support for thoracic or shoulder stabilization. The upright support may be angled to any position from 0 degrees to 90 degrees, and has a height adjustment of 12 inches to 24 inches. The front pad raises 20 degrees, and the rear pad rotates for stor

Raised Desk

DO IT YOURSELF PURPOSE: To enable individuals with spinal cord injuries or back pain to use a standard desk from a wheelchair, kneeling chair, or while standing. This desk is created by replacing the standard legs on a conventional desk with extra-long table-style legs. Each leg replacememt is kept rigid by two half-inch flat steel braces made of 0.5 x 1/8 inch steel bar. The top end of the steel is fastened to the desk with wood screws and the bottom ends are fastened to the legs with hose cl

Raised Height Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Blocks to raise the height of a table so a wheelchair can pull up to it. Describes table raisers made of wooden blocks the desired height, and pieces of 1 inch thick wood with holes the size of the table legs drilled in them, glued together. A nonslip pad can be glued on the bottom. SKILLS REQUIRED: Woodworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Independence Factory: p 17 NARIC CALL NUMBER:

Rehabilitation Table

The Rehabilitation Table is a height-adjustable tilt-top work table designed for use by individuals who use wheelchairs. The base is equipped with a modesty panel and is constructed of 18 gauge steel. The table has a laminate top with a raised edge and a cutout for access. The tilt angle adjusts from 0 to 35 degrees. The table has four caster for mobility and two of the casters lock. DIMENSIONS (HxDxW): The top is 0.75 x 30 x 40 inches. Table height adjusts from 29 to 44 inches. COLOR: Grey top

Resist-A-Skate System (Model 31909)

The Resist-A-Skate System, model 31909, is a hand/wrist/forearm exercise table and exercise skate and pulley weight package designed to provide range-of-motion exercise for arms and shoulders. This package includes a Deluxe Exercise Skate, model 31910; a Skate Board, model 31915; and the Skate Resistance System, model 31909. These items are also sold individually; see separate entries. WARRANTY: The manufacturer warrants these products against defects in workmanship and materials for 90 days fro

Restrainer Strap (Model Nk 682)

Restrainer Straps, model NK 682, are designed for use with tilt tables to secure an individual to that table. The strap utilizes metal buckle fasteners for secure locking and quick release. The webbing is a high test nylon sewn on a canvas restrainer strap. COMPATIBILITY: Fits all NK Products tilt tables. DIMENSIONS: 5 inches wide x 97 inches long.

Reversable Activity/hand Therapy Table (Model 6272)

The ReversABLE Activity/Hand Therapy Table is a wheelchair- accessible manual height adjustable therapy table designed for clinic use. This table combines a hand therapy with an activity board and accommodates two users. The activity board inserts rotate 360 degrees and have a laminated surface on one side and an oak pegboard with 100 holes on the other; the inserts can be locked flat or at a 60-degree angle. A set of 200 easy-grip stackable pegs is included. DIMENSIONS: The front radius is 94 i

Rfi Multi-Use Desk / Table.

Adjustable height worktable from 21 to 34 inches. 44 inches wide by 24 inches deep. Red oak frame, contoured matching laminate work surface. Designed spill rail, prosthetic device holder, side mounted book caddy. Accommodates children and adults.

Rifton Multidesk (Models E270 & E280)

The Rifton MultiDesk, models E270 and E280, is an accessible table designed for use by individuals who use wheelchairs. Available with a tilt or fixed flat top, these tables have curved cutouts for access and are height adjustable without tools. The tilt-top models have a table top that tilts upward with a double-latching mechanism in 5-degree increments, from 0 to 30 degrees. A book ledge keeps items positioned when top is tilted. OPTIONS: Three- or five-inch deep top-opening book boxes that at

Rolyan Splint Center (Model A5314)

The Rolyan Splint Center, model A5314, is a splintmaking work station designed for use in the clinic or at the bedside. This mobile cart features a laminated-plastic surface and a flip-up shelf with a rim on three sides to support the limb. Other features include a partitioned drawer and locking partitioned cabinets to store splint pans, splint materials, strapping materials, and other supplies (equipment not included), as well as four smooth-rolling casters (two swivel and two locking) for mobi

Round Group Therapy Table (Model Gpp-360)

The Round Group Therapy Table, model GPP-360, is a treatment table designed for use in therapy settings. The height-adjustable table has a laminate top and height adjustment is accomplished by pulling on the adjustment knob. To lower the table, the knob is pulled and gentle pressure is applied to the top. The table seats four or five individuals and accommodates most wheelchair styles. OPTIONS: Casters. DIMENSIONS: The height adjusts from 24 to 36 inches and the table surface is 36 inches in dia

Rubbermaid Adjustable-Height C-Frame Overbed Table

The Rubbermaid Adjustable-Height C-Frame Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs Constructed of molded composite plastic, this height-adjustable table has a C-frame base to slide under the bed or for wheelchair accessibility. The table converts for right-or left-handed use and features a large wipe-clean worksurface with a molded-in cup holder and four easy-roll casters. DIMENSIONS: The height adjusts f

Runged Tabletop

CUSTOM ADAPTATIONPURPOSE: To provide children unable to stand without support with a table incorporating grips that provide support when standing or sitting. The rectangular tabletop is fitted to the base of a height-adjustable table and is made from a single piece of 12-millimeter (mm) plywood. On each lengthwise half of the tabletop, two sets of 37-centimeter (cm) long slots are cut using a router. These "rungs" are two cm wide on one half and three cm wide on the other to accommodate differen

Saturn Square Ada Picnic Table (Model T46Ebperf3P)

The Saturn Square ADA Picnic Table, model T46EBPERF3P, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. The table has benches on three sides with space for a wheelchair on the fourth side. The table has a high-gloss surface with smooth rolled edges and an umbrella hole in the center. It is made from 11-gauge punched steel with a plastic-coated top and seats. DIMENSIONS (HxLxW): 18 x 46 x 46 inches. The seats are 38 inches long by 12 i

Sensory Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted sensory table for children of different ages with hearing or visual disabilities. An adjustable table with a round wooden top, a metal frame, and adjustable legs was used for this adaptation. The top of the table was removed from the frame and four indents were cut into the sides of the table allowing four children to stand supported at the table. A plastic container was fitted through a hole cut in the table top and the sq

Sewing Machine Modifications

The Sewing Machine Modifications are designed to make a sewing machine table wheelchair accessible. The modifications include a commercial sewing machine table that has been raised 10 inches to accommodate a wheelchair and an inverted foot pedal. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for a wheelchair user to enable the person to wheel right up under the table, and the foot control pedal was inverted to allow the individual a better reach from the wheelchair.

Sheffield Ada Picnic Table

The Sheffield ADA Picnic Table table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular table has two benches and space at one end to accommodate a wheelchair. The frame is made from an average of 66% recycled steel. The table top and seats are made from heavy gauge expanded metal with 30% recycled plastic content. OPTIONS: Surface mount table clamps (2 per table) to deter theft. DIMENSIONS (HxLxW): Table is 31 x 96 x 3

Shrouded Bariatric Straight Back Power Table (Model 84108-30 & 84108-40)

The Shrouded Extra Wide Bariatric Straight Top Power Table, models 84108-30 and 84108-40, is a powered, height-adjustable treatment table designed for use by individuals with lower extremity, and mobility disabilities and obesity. The unit has a welded steel base, top frame, and scissors lift, with a plywood top for support. The lift mechanism is enclosed with ABS plastic. A foot control allows hands-free operation. OPTIONS: Locking casters; set of two safety straps (2 x 92 inches) secured with

Shrouded Extra Wide Bariatric Power Table With Adjustable Backrest (Models 84208-34 & 84208-40)

The Shrouded Extra Wide Bariatric Power Table with Adjustable Backrest, models 84208-34 and 84208-40, is a powered elevating treatment table designed for use by individuals with lower extremity and mobility disabilities and obesity. The table has a dual cylinder, pneumatic backrest that is adjustable from either side and raises up to 80 degrees from a flat position. The unit has a welded steel base, top frame, and scissors lift, with a plywood top for support. The lift mechanism is enclosed with

Sierra Electric Adjustable Workcenter

The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset

Single Adjustable Table (Model 7Whcs) & Double Adjustable Table (Model 7Whcd)

The Single Adjustable Table, model 7WHCS, is an accessible table designed for use by people who use wheelchairs. This height-adjustable table has an open base, a torso cut-out to enable the user to position himself/herself close to the work area, and a raised rim on three sides to prevent items from tolling off. The Double Adjustable Table, model 7WHCD, is also height adjustable and features dual torso cut-outs to enable two wheelchair users to face each other while using the table. Raised rims

Single-Surface Height-Adjustable Work Station

The Single-Surface Height-Adjustable Work Station is a height-adjustable work table designed to accomodate both manual and powered wheelchair users. The height is adjusted using a hand crank which retracts out of the way when not in use. A comfort recess enables the user to get close to the table to maximize usable surface area. Casters provide mobility. OPTIONS: Articulating keyboard arm. DIMENSIONS (HxLxW): The work surface is 48 x 30 inches. The height is adjustable from 24 to 34 inches. COLO

Skate Board (Model 31915)

The Skate Board, Model 31915, is a hand/wrist/forearm exercise table designed for use with an exercise skate. The table includes a vinyl-covered hardboard surface with a figure-8 pattern, a hand hole for carrying, and a metal rim on three sides. The unit can be clamped to a worksurface. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Soft Curve Hydraulic Lift Table- (Model 74-14H)

The Soft Curve Hydraulic Lift Table, model 74-14H, is a hand/wrist/forearm exercise table designed for use in therapy settings. This height-adjustable table has a laminated top with close cut-out on all sides to provide close positioning for the therapist and the client. It features chrome-plated steel base with a swivel top. Height adjustment is accomplished by applying foot pressure to the foot pump that is mounted on the base. DIMENSIONS (HxLxW): 24 to 36 x 36 x 36 inches. The base is 28 in

Sportsplay Picnic Work Table (Models 382-510 & 382-511)

The SportsPlay Picnic Work Table is an indoor/outdoor table designed to accommodates 6 seated plus 2 wheelchairs for children in a wheelchair. The height allows most youth wheelchair arms to fit under the table. The frame is made of 1 5/8" OD galvanized pipe. DIMENSIONS: 8 feet x 30 inches x 30 inches high; 6 foot benches. WEIGHT: 135 pounds (aluminum), 200 pounds (wood).

Sportsplay Wheelchair Picnic Work Table (Models 382-513 & 382-514)

The SportsPlay Wheelchair Picnic Work Table is designed with an open leg design to provide easy access for children who are in wheelchairs. It offers extra height neccessary to allow a child in a wheelchair a comfortable fit. Up to 8 wheelchairs can fit around the table. The top is available in untreated No. 1 yellow pine or anodized aluminum. The support frame is made of 1 5/8" OD galvanized pipe. OPTIONS: You may purchase separately the legs and hardware only. DIMENSIONS: 4 x 8 feet. WEIGHT: 1

Studio Clinician

The Studio Clinician is a treatment table designed for therapists assisting persons with biomechanical exercises. This stationary table features face plates at both ends and no shelving beneath the table. OPTIONS: Vinyls: Sierra Doeskin in all colors; Accessories: Face rests, foot rest. CAPACITY: 1500 pounds. DIMENSIONS: 22-34 x 73 x 29 or 31 inches. WARRANTY: 10 years.

Supersaver Ada Picnic Table (Models Bdt8Hdp & Bdt8Hdsm)

The SuperSaver ADA Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has centered seats on both sides and space for wheelchair access at each end. The tabletop and seats are made from steel with a thermal-fused plastic coating, and the frame is powder-coated galvanized steel. The table is available in a portable version (model BDT8HDP) or a surface- mounted version (model BDT8HDSM). DIMENSIONS

Swing-Away Table

The Swing-Away Table is an accessible table designed for use by individuals with mobility disabilities. This height-adjustable table has a tubular steel base that sides under a bed or chair for stability; a braclet to grasp a chair arm for additional security. The tabletop swings a full 360 degrees for proper positioning as needed or to move out of the way for transfers. DIMENSIONS: The height adjujsts from 21 to 33 inches and the top of the table is 18 inches in diameter.

Table Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table attachment to allow a child to sit with the rest of the family at meal times. Plywood board 12 by 24 inches with a semicircle cut to fit against the child. It is fastened to the table or desk with G clamps. Includes drawing and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 56-57. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC

Table To Facilitate Donning Stubby Prostheses By Bilateral Above-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Using short stubby prostheses in elderly bilateral above-knee amputees has been advocated by several experts. A table was designed to facilitate donning stubby prostheses. Table is made of 3 sheets of 3/4" plywood 18 inches square. The table measures 18 inches in height, width, and depth. This height was selected to facilitate the table's use from the patient's wheelchair or bed. Across the top of the table is a horizontal platform with two cutout slot

Table-Mate Ii

The Table-Mate II is an accessible height-adjustable tilt top work table designed for use by individuals with mobility disabilities. This portable table adjusts in height and angle, adjusts for chair and body size, and folds for storage. This table holds up to 50 pounds and can serve as a student desk or workstation or be used for reading, hobbies, puzzles and games, and art activities. DIMENSIONS: The table top is 20.75 x 14.75 inches and the distance between the legs is 18.25 inches. The heigh

Therashape Group Table

The Therashape Group Table is a therapy table designed for use by individuals who use wheelchairs or in activities requiring close proximity to the table. The table is curved with cut out areas to accommodate three individuals. The table is height-adjustable using hand knobs and the steel powder-coated legs feature knob-style column locks and six adjustable base levelers. DIMENSIONS: The table adjusts in height from 23 to 33 inches. Each of the cut-out areas is 18 inches wide x 10 inches deep. T

Therashape Table

The Therashape Table is a therapy table designed to be used as a treatment, feeding, or activity table for any healthcare setting. This table accomodates four to five individuals. Three adjustable legs provide seating room and access, and offer height adjustments. The legs feature knob-style column locks, 5 adjustable base levelers, and a steel column. DIMENSIONS (LxW): The table top measures 72 x 28 inches. Table height can be adjusted from 23 to 33 inches. COLOR: Maple-finished high-pressure l

Tiltables By R82

The Tiltables by R82 are powered and manual standers that convert to supine, prone, or upright standers and tilt tables designed for use by children and adults with mobility disabilities. All units include trunk support strap, individual height- and angle-adjustable foot supports, and locking casters. Each table provides 90- to 185-degree surface angle adjustment. The tables are available in three sizes, and sizes 2 and 3 are available with or without motorized power tilt; size 1 is available as

Trader Picnic Table - Wheelchair Accessible (Models Tada-1700 & Tada-1800)

The Trader Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectagular table has benches on two sides with space for a wheelchair at the end. The table has a recycled plastic top and benches with a heavy duty powder coated steel frame. The table is available with surface or inground mounting. DIMENSIONS (HxLxW): Table top is 33 x 72 x 30.37 inches (model TADA-1700) or 33 x 96 x 30.37 inches (m

Tre-Ch3

The TRE-CH3 is a powered elevating treatment table designed for clinical and therapeutic use. This table features powered height adjustment with a range that accommodates wheelchair access as well as gurneys. Standard features include foot pedal operation, a tilting headpiece with face opening, extending ankle rest, and a paper cutter/dispenser. OPTIONS: RhinoHyde upholstery. DIMENSIONS: The height adjusts from 20 to 37.5 inches. COLORS: The standard upholstery is offered in eight standard and s

Treatment Tables (Model 400, 410, & 430)

This model series of plain legged treatment tables have a natural finish but, a walnut finish is available at no extra cost. All models have the standard Naugahyde upholstered tops with Herculite 80 available at an extra cost. Herculite 80 is an easy to clean, fire retardant, tear resistant and mildew proof nylon reinforced material. COLORS: Black, dewberry, mauve, regimental blue, dove gray, sand, chestnut, space blue, camel, dusty jade, forest green and blue ridge. DIMENSIONS (WxLxH): (Model

Txe-1 & Txf-1 Traction Table

The TXE-1 and TXF-1 Traction Tables are powered traction tables designed for clinical use. These tables feature a progressive mode which enables traction to increase in increments and permits up to nine progressive steps. The electronic display shows digital poundage readouts up to 200 pounds. The pelvic/lumbar section separates smoothly, reducing friction during lumbar traction. These four-section tables have a head section that features a breathing slot and adjusts up or down 25 degrees. Model

Txe-7 & Txf-7 Traction Table

The TXE-7and TXF-7 Traction Tables are powered traction tables designed for clinical use. These tables feature intermittent and static modes, both with treatment times up to 60 minutes and a red light indicator shows when maximum poundage is reached. The pelvic/lumbar section separates smoothly, reducing friction during lumbar traction. Other features include an illuminated on/off switch and a head section with a breathing slot which adjusts up or down 25 degrees. Model TXE-1 is available with o

Typing Table For Wheel Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides typewriter or other table at proper height for wheelchair user. One-legged plywood table measuring 15 inches by 22 inches by 1/2 inch is reinforced with 2 wooden braces. COMMENTS: Submitted by Physical Medicine Rehabilitation Service, Veterans Administration Hospital, Richmond, Virginia. SKILLS REQUIRED: Woodworking. AUTHOR: New York University Bellevue Medical Center Institute of Physical Medicine and Rehabilitation TITLE: Typing Table for Wh

Universal Spa Table

The Universal Spa Table is designed for therapists administrating massages, salt rubs, body wraps and other skin care treatments. This therapeutic table provides two face holes designed to double as drains and a moisture proof drape. It also features adjustable powder-coated aluminum legs. OPTIONS: Vinyls: Sierra Doeskin in all colors. Accessories: Face places, Locking wheels and Side supports. CAPACITY: 1000 pounds. DIMENSIONS: 25-35 x 76 x 31 inches. WEIGHT: 3000 pounds (static). WARRANTY: 10

Vari-X Computer Table (Models Vx60, Vx61, & Vx62)

The Vari-X Computer Table is an adjustable-height computer table designed for use by individuals who use wheelchairs, and those with severe physical disabilities and spinal cord injury. These computer tables can each be lowered to less than 10 inches off the floor for individuals who need to work lying down, raised to accommodate a wheelchair, and raised up to three feet five inches off the floor to allow users to work standing up or in a stander. The worktop passes easily through doorways on it

Vision

Vision is a height-adjustable table that has not cross braces underneath the surface. It is designed for individuals who use a wheelchair for mobility. The Vision is a mobile table that can be adjusted manually or electrically. The adjustable surface is available for dual or single users.

Vox Adjustable Workstation-Bi-Level Rectangle

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Vox Adjustable Workstation-Corner

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries.It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Wall-Mounted Folding Treatment / Changing Table

The Wall-Mounted Folding Treatment/Changing Table is designed for clinical use. This table mounts to the wall with the included floor-supported wall-mounting plate. Designed for therapy, treatment, or changing a child or an adult, this table features folding Formica laminate legs, a foam-padded top, and vinyl uphostery. The unit folds up against the wall when not in use. DIMENSIONS (WxHxL): 24 x 31 x 72 inches. The unit projects only 8 inches from the wall when folded. COLOR: The upholstery come

Welded Frame Science Table, Round Legs (Model A3080-99)

The Welded Frame Science Table, Round Legs, model A3080-99, is a height adjustable work table and adapted student desk designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This table has a welded steel frame and a chemical-resistant EcoStone top that is made from 100% post consumer recycled materials. DIMENSIONS (HxWxD): 29 (minimum) x 60 x 24 inches. WARRANTY: Lifetime warranty.

Welner Enabled Legacy Examination Table

The Welner Enabled Legacy Examination Table is an extra wide, hi-lo, fully electric powered examination table designed for use in clinical settings by individuals with obesity and mobility or physical disabilities. The table can be lowered for wheelchair user access. Standard features include width and weight capacity suited to bariatric patients, side rails and full length accessory rails on both sides of the table, foot calf boot system with pad, powered back and pelvic sections, an anti-stati

Westin Picnic Table - One End Wheelchair Accessible (Model Sptha)

The Westin Picnic Table – One End Wheelchair Accessible, model SPTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has benches on two sides, with space for a wheelchair on one end. It is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 96 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 340 pounds. COLOR: Cedar table top and seats with green fr

Westin Two-End Wheelchair Accessible Picnic Table (Model Ptha)

The Westin Two-end Wheelchair Accessible Picnic Table, model PTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectancular picnic table accommodates two wheelchairs. It has a raised top and extended ends to allow wheelchair users to maneuver under the table. The table is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WE

Wheelchair Accessible Table (Model TF31281)

The Wheelchair Accessible Table, model TF31281, is a wheelchair picnic table designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The unit seats 7 people around a circular tabletop, with three benches and space for a wheelchair. The tabletop has a polished or ground concrete surface, and it accepts an optional umbrella. The unit is made of steel-reinforced concrete with metal legs. Assembly is required. OPTIONS: Umbrella; refinishing kit for concre

Wheelchair Accessible Tops And Seats

Standard picnic table with extra long top. Seats are 6 feet long, tops are 8 feet long. Galvanized steel frame. Constructed of Redwood, aluminum, or fir. Weight: 222 pounds, 62 pounds, 130 pounds, repectively.

Wheelchair Picnic Table (Model 1312)

The Wheelchair Picnic Table no. 1312 has a table top that extends 12 inches at one end to be accessible to wheelchair users. The table and seats are constructed of anodized aluminum. The curved leg supports are made of 1 5/8-inch O.D. galvanized pipe. GROUND SPACE: 5 by 8 feet. WEIGHT: 115 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair Picnic Table (Model 1337)

The Wheelchair Picnic Table no. 1337 has pressure-treated wood top and seats on curved leg supports made of 1 5/8-inch O.D. galvanized pipe. The table top extends 12 inches beyond the benches and has no obstructing posts or beams to provide wheelchair access. GROUND SPACE: 5 by 8 feet. WEIGHT: 206 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair-Accessible Desk

The Wheelchair-Accessible Desk is a height-adjustable deskdesigned for classroom use by children who use wheelchairs. This desk features a heavy 16-gauge frame with an integral U-brace and an oversized solid-plastic top. It includes a dual-bolt leg attachment system for added security. DIMENSIONS: The desk height can be adjusted from 31 to 34 inches. The desktop is 20 x 36.5 inches. COLOR: The top is available in beige or grey.

Wheelchair-Accessible Mobile Workstation (Models W53191 & W53192)

The Wheelchair-Accessible Mobile Workstation is a height-adjustable work table designed for use by individuals who use wheelchairs in schools, training centers, and offices. The work surface is mar-resistant laminate with rounded corners edged with protective vinyl molding. Its open design allows access to and from work surface. The tabletop height is adjustable to accomodate a variety of users. The unit features four casters, two with locking brakes. DIMENSIONS: The height adjusts in one-inch i

Wooden Picnic Table - Wheelchair Accessible (Models Pup238H-Pt8 & Pup158H-Pt8)

The Wooden Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides made from Southern Yellow Pine planks, with space for a wheelchair at each end. Users can slide into the seats without stepping over the frame. The wood is ACQ-treated and the frame is either galvanized or powder-coated iron pipe. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. The seats a

Working Table

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table can be shaped like half a donut for persons with limited reach. Describes a work table made of wood or other sturdy material, 64 by 32 by 5/8 inches in size, cut in a half-circle with a semicircular indentation on the flat side to accommodate the person working. Suggests using the type of folding legs used on banquet tables. Table folds up for easy storage. SKILLS REQUIRED: Woodworking. AUTHOR: Mooney, J TITLE: Working Table JOURNAL: Accent on Li

Worktable With Support For Standing.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable work table provides extra support and balance needed to prevent employees from falling. Particularly useful for lower extremity amputees. Wooden table top consists of wide hinged armrests and a safety belt. Four adjustable 7/8 inch metal pipes run through standard work bench to serve as legs. Includes photograph and diagram. COMMENTS: Submitted by the Occupational Therapy Department, Institute of Physical Medicine and Rehabilitation, New Yor

 
Processing...


Driving Walking/Biking Public Transit  Get Directions