Trays and Tables

Results: 193

Able Generation Play Table

The Able Generation Play Table is a cut out table designed for use by children with physical disabilities. This wooden table enables the child to be surrounded on three sides, stabilizing the arms and aiding in focusing the attention. The table tilts to five, 15, or 25 degrees. A lip on the inside and outside edges minimizes the possibility of small items, books, and papers sliding off the table when the top is tilted. This table may also be used during floor sitting or supported standing. OPTIO

Able Table

The Able Table is a height-adjustable tilt-top work table and overhead bookholder designed for use by individuals who use wheelchairs or eith severe physical disabilities or spinal cord injury. This unit lifts books for eye-level or overhead reading within a range of 9 to 18 inches high. Springs provide the lifting power. The unit is designed so that the book will stay where placed: up or down, left or right, at any angle without adjustment of knobs or levers. A single knob locks the top in plac

Ableware 706010000 Laptop Wheelchair Desk

Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.

Accella Series (Models 6030, 4830 & 6024)

The Accella Series, models 6030, 4830, and 6024 are computer work centers and height-adjustable work tables designed for use by individuals who use wheelchairs. The height adjustment, which is accomplished using the built-in hand crank, also provides access for individuals who stand or use standing aids while working. The hand crank is located underneath the tabletop and folds out of the way when not in use. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIO

Active Life Station

The Active Life Station is an accessible table designed for use with children and adults with severe cognitive, emotional, or physical disabilities who require constant supervision. This table system surrounds the user on all sides, with one side being a secure access door. The individual's wheelchair or feeder seat is positioned on a 360-degree rotating base in the center, enabling the user to access table surfaces on all sides. The station can be used for watching television, using a computer,

Activity Tray

The Activity Tray is a height adjustable tray designed for use by people with upper extremity, fine motor, grasping or neurological disabilities or conditions such as multiple sclerosis, cerebral palsy or Parkinson's. Made of rugged ABS, the Activity Tray can be set at any of 4 available heights by pulling the easy-open handle. The tray has two recessed cutouts for placing mugs or cups and can be used to place food and drink closer to a person's mouth. The Activity Tray can be reversed so that

Ada Compliant Wheelchair Accessible Desk (Model 876)

The ADA Compliant Wheelchair Accessible Desk, model 876, is a height adjustable classroom desk designed for use by children who use wheelchairs. This table has a polyester powdercoated frame, nickel-chrome plated legs, and either a fiberesin-laminate or plastic desktop. The telescoping legs are adustable by sliding the lower leg inserts into the upper legs and tightening a set screw. The lower leg inserts have adjustable nylon glides and optional locking wheels. DIMENSIONS (LxW): The table top i

Adapted Desk.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Desk designed and modified by someone with cerebral palsy so he could store items where they are easy for him to reach and to hold books for reading. Made from single pedestal desk 48 by 30 inches wide with legs shortened. Bookcase made of 3/4 inch hardwood with two shelves. Two tilted wooden trays, extended across the desk, are used as bookholder. SKILLS REQUIRED: Woodworking. TITLE: Adapted Desk JOURNAL: Accent on Living REF: Vol 30 No 1, Summer 1985

Add-On Table

CUSTOM ADAPTATION PURPOSE: To provide a dining table for a young woman with mobility disabilities. The add-on table is made of a 5/8- inch plywood and resembles a card table with only two legs. The front edge of the table is attached and removable from the main dining room table with two sturdy hooks. The height of the table has been lowered to a more comfortable level and a semi-circle has been cut out to fit the young woman’s waist, allowing her to get up close. TITLE: The Add-on Table. WEBSI

Adjustable Desk With Storage

The Adjustable Desk With Storage is a height adjustable desk designed for use by individuals who use wheelchairs. This desk has a large work surface with a curved cutout for accessibility. An attached vertical storage shelf/box is located on the side to provide knee space. The height adjusts using a knob-style column lock on the legs. DIMENSIONS (LxW): The top measures 40 x 24 inches. The height adjusts from 23 to 33 inches. COLOR: Maple finish laminate top with almond powder-coated base. WARRA

Adjustable Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor table adjusts to set work area at proper height and angle for child. Plywood table with 12 inch by 18 inch top. Upper side panels measure 8 inches by 12 inches; lower side panels measure 10 inches by 12 inches. Double side panels allow user to adjust height and angle. Softwood edge can be added around front and top sides. A cutout can also be added. To determine the correct size and shape of the cutout, bend a piece of coat hanger or other soft w

Adjustable Height Individual Cut Out Work Table (Model 372)

The Adjustable Height Individual Cut Out Work Table, model 372, is an adjustable height work surface with a large cutout and raised rim on 3 sides. The legs are made with chrome plated steel. Top is 24 by 24 inches with 12 by 15 inch cutout. Height adjusts from 22 to 35 inches. Other size cut outs are available on request at additional cots.

Adjustable Height School Desk (Model 370)

This is an adjustable height functional school desk for wheelchair students. The features include a cut out that permits close access and a large working space. A bookholder under right side of the table is available for storage. The desk legs are made of chrome plated steel and plastic adjustable glides are attached to the legs for uneven floors. The surface is wood grain laminated and scratch resistant. DIMENSIONS: height adjusts from 24 to 34 inches, top 40 x 24 1/2 inches, cut out 9 x 14 inc

Adjustable Height Tilt Top Work Table (Model 371)

This tilt top table is adjustable and functional for wheelchair students. The offset cut out allows close access and a large working space for the student. A bookholder on the right side has amble space for storage. The legs are chrome plated steel. DIMENSIONS: height adjusts 25 to 29 inches, top tilts to a 45 degree maximum, the cut out is 9 x 14 inches, 27 inches exist between legs and the book holder.

Adjustable Leg Work Table (Models 42-254/3D, 42-255/0D, & 42-256/8D)

Adjustable height work table. Laminated plastic top table on 1 1/8 inch thick high density particle board. Height adjusts 22 to 30 inches in 1 inch increments. 2 tubular steel legs with supports. Variety of table sizes.

Adjustable Wooden Bed Tray (Model Ha-4801)

The Adjustable Wooden Bed Tray, model HA-4801, is a bed tray designed for use by individuals with mobility disabilities. This table has legs that fold out to allow the tray to be placed across the lap. The tray is adjustable to five different angles for reading, writing, and other activities, and it is laminated to allow easy cleaning. DIMENSIONS: 480 x 340 x 20 millimeters. WEIGHT: 1.5 kilograms.

Adjustable Work Carrel.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Work carrels, one with an adjustable work surface, the other with a hinged work surface to allow variation in placement including people needing to use their feet. Three sided carrel with adjustable height horizontal surface. A second version has a segmented hinged work surface to allow additional variations. Detailed assembly drawings are shown. They have been represented in a very small font. Contact developer for larger prints. COMMENTS: For additio

Adjustacart

The AdjustaCart is a height adjustable desk or computer work center designed to be configured for the user's needs. This desk features a control pad which, when squeezed, raises or lowers the worksurface to the desired level. The cart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and

All Purpose Table (Model F712)

The All Purpose Table, model F712, is a bed tray with a tilt top that will fold flat. It has clips for holding books or papers, and a laminated top with a lip at the front edge. DIMENSIONS: 12 x 18 x 17 inches.

Alvin Reflex Table

The Alvin Reflex Table is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. This table has a wide, open base and telescoping legs with easy-grip height-adjustment knobs. The large Melamine top is angle-adjustable from zero to 45 degrees and features a PVC rim to prevent items from rolling or sliding off. A half-circle cut-out provides access for wheelchair users. This table folds flat for storage. DIMENSIONS: The top is 30 x 40 inches. The height adjust

Anthrocart

The AnthroCart is a computer work center or height adjustable desk designed to be configured to meet the user's needs and provide ease of access. The AnthroCart is consists of 16 gauge steel legs and supports with industrial-grade particle board shelves and soft rubber, twin-wheel castors. Pre-drilled holes allow the shelves to be placed as desired. The open design allows access to both the front and back of the cart, and front locking casters prevent rolling when mobility is not required. OPTIO

Apollo Square Picnic Table - Wheelchair Accessible (Models T46Eb-3Sm & T46Eb-3S)

The Apollo Square Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This square table is made of plastic-coated steel, with seats on three sides and space for a wheelchair on one side. The table has an umbrella hole in the center and is available in portable/surface mount (model T46EB-3SM) or inground frame (model T46EB-3S) models. OPTIONS: Aluminum mounting plates to hide mounting brackets and hard

Apollo Wheelchair Accessible Picnic Table (Models T9Ebrdcppsm & T9Ebhdcps)

The Apollo Wheelchair Accessible Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular picnic table has a single long table top with one long bench on one side and two shorter benches on the other, with space for a wheelchair between the two shorter benches. There is an umbrella hole in the center of the table top. The table is made of plastic-coated steel and is available with either a portable/surface mount

Armchair Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to fit close to the body and rest on the arms of an armchair, held in place with elastic straps. Plywood tray about 18 inches deep and wide enough to fit across the arms of the chair, with extensions on the bottom to keep it from slipping sideways; an edge across the front; a semicircular cutout to fit around the body; and elastic car roof rack straps to keep it from slipping forward. Lists materials needed and provides instructions and drawings.

Artist's Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable angle table can be built to any height. Instructions for wooden table. Top is an adjustable angle easel. Frame can be built to any height including wheelchair accessible. Includes drawing and dimensions for materials. SKILLS REQUIRED: Woodworking TITLE: Dream Table for an Artist REF: Article: Sunset Magazine, February 1990, pp 124B-125. PAGES (including cover):2 1990.

Assist-A-Tray

The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur

Automatic Overbed Table (Model P2600)

The Automatic Overbed Table, model P2600, is designed for use by individuals who spend extended periods in bed. This height-adjustable table features a melamine laminated top, a C-shaped open base to slide under the bed or accommodate a wheelchair, and four swivel casters for mobility. The height adjusts with fingertip pressure. DIMENSIONS: The casters are 2 inches in diameter.

Babee-Tenda Safety Table

The Babee-Tenda Safety Table is a safety feeding and play table designed for use by young children with parents who use wheelchairs. Height-adjustable, this product can be used as a "short" high chair for feeding and taking care of a child. This product converts for a number of uses including infant seat/carrier, bather, changing table, high chair, booster chair, swing, playtable, chalkboard, easel, utility table. The feeding table is designed so that the baby is surrounded by the table and ca

Bed And Lap Tray (Model P5001)

The Bed and Lap Tray, model P5001, is a bed tray designed for use by individuals with mobility disabilities. Made of wood, this tray has a laminated top that tilts for reading or writing or lies flat for eating. Adjustable legs allow the tray to be used in bed, in a wheelchair, or in a lift chair.

Bed Desk

The Bed Desk is a bed tray, bookholder, and laptop/notebook computer support designed for use by individuals with mobility, upper extremity, or severe physical disabilities or spinal cord injury. This unit is a book stand with legs like a bed tray. The two legs are collapsible and the desk can be adjusted to an angle for holding books, paper, or magazines. Made of imported Baltic birch, the unit supports up to 20 pounds and can be used with the legs extended or folded. When the legs are folded,

Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed tray with larger top than commercially available bed tables. Instructions for a bed table with a large top. Cutout for body, rim on three sides. Material list and diagram showing dimensions. Includes drawing and photograph.. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy To Make Aids For Your Handicapped Child. REF: Book: Englewoods Cliffs, NJ: Prentice-Hall Inc: p 114-115. NARIC CALL NUMBER: R1798 1982.

Bedside Computer Stand

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to utilize a computer from a bed. The base of the stand is a standard overbed table on a wheeled base. A box of varnished plywood on a caster base was added to the table. The box was equipped with a central shelf, creating three surfaces on which to store computer equipment and other items. The original table surface was attached to the side of the box and is height adjustable using a trinut. The surface also rotates so

Bedside Computer Stand And Monitor Positioning System

CUSTOM ADAPTATION PURPOSE: To position a computer screen to be easily seen from a bed, hold the monitor and printer, and store other computer-related equipment such as cables and CDs) for an individual with quadriplegia. Laminated MDF was used to make a stand, which has a base with locking castors, a range of drawers for storage at the bottom and shelves above them, one with larger space to hold the monitor. There is also a pull-out shelf above the drawers for a keyboard and can be used when i

Bedside Table

CUSTOM ADAPTATION PURPOSE: To provide custom adaptation to bedside table for an individual with rheumatoid arthritis. A plywood box was constructed and screwed into an existing table top. The inside of the box forms a lower shelf, and the top forms the upper one. Inside the box, a shelf mounted on drawer runners was added. The shelf has a small hook-style handle in the center for easy, out of the way use. A small gap all the back of the box accommodates cords for various equipment. A larger hol

Bi-Level Computer Workstation

The Bi-Level Computer Workstation is a height-adjustable computer table designed for use by individuals who use wheelchairs. The height adjustment range starts low for young children or those using manual wheelchairs, and the height adjusts sufficiently to provide ample knee and arm-rest clearance for powered wheelchair users. Two hand cranks allow both work surfaces to be adjusted independently for correct view-height and balance between keyboard and monitor. DIMENSIONS (HxLxW): The keyboard su

Cedar-Black Ada Picnic Table (Model 07Ey1148)

The Cedar-Black ADA Picnic Table, model 07EY1148, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. Made of recycled plastic, this long table has space for a wheelchair at each end. The table top and seats are slightly grained for a cedar wood appearance. DIMENSIONS (HxLxW): The tabletop is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 358 pounds. COLORS: The top and seat are cedar-colored and the frame is black. D

City Round Pedestal Wheelchair Accessible Picnic Table

The City Round Pedestal Wheelchair Accessible Picnic Table is designed for use by individuals who use wheelchairs. This round picnic table has three seats attached to the pedestal which can accommodate six adults. The table also has an opening to accommodate a wheelchair. The table top is thermoplastic coated and sits on a powder-coated steel pedestal. The table also has an umbrella hole. DIMENSIONS: Table is 30 inches high and the table top is 46 inches in diameter. The seats are (HxW) 18.25 x

City Square Picnic Table - Wheelchair Accessible (Model Pup358H-V)

The City Square Picnic Table - Wheelchair Accessible, model PUP358H-V, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has three attached seats with space for a wheelchair on the fourth side. It has a galvanized, powder-coated steel frame, with a high-gloss plastic coated table top and seats, and is portable/surface mounted. The table top has an umbrella hole. DIMENSIONS (HxLxW): The table top is 30 x 56 x 46 inches. The s

City Wheelchair Accessible Picnic Table - One End (Model Pup238H-V8S)

The City Wheelchair Accessible Picnic Table - One End, model PUP238H-V8S, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides and space for a wheelchair on one end. It is made from powder-coated galvanized steel, with plastic coating on the table top and seats, and has a portable/surface mount. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches and the seats are 18.75 x 72 x 12 inches. WEIGH

City Wheelchair Accessible Picnic Table - Two End (Model Pup238H-V8)

The City Wheelchair Accessible Picnic Table - Two End, model PUP238H-V8, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has an extended table top at both ends to allow access for two wheelchairs. The portable, surface- mounted table has two benches and is made from thermoplastic-coated steel with a powder-coated galvanized steel frame. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. THe seats

Class Desk With Adjustable Legs

The Class Desk with Adjustable Legs is a computer desk designed for use by individuals who use wheelchairs. Work surface heights can be altered as needs change and the work surface is available in a variety of widths. The desk features a hinged "Flip-Top" door that runs the full length of the work surface to provide access to cords and cables. The scratch-resistant work surface has a smooth, rounded front edge and a chair rail to prevent hardware from sliding off. OPTIONS: Adjustable CPU sling;

Classroom Positioner Desk / Stander (Models Ds1 & Ds2)

The Classroom Positioner Desk/Stander is a height-adjustable classroom desk and standing table designed for use by children with mobility or neurological disabilities. This desk can be used with the Classroom Positioner Chair (see separate entry) or independently. Features include height and angle adjustability, a multi-adjustable desktop, adjustable knee block, and lateral pelvic pads for standing positions. The desk also included latches to secure it to the Classroom Positioner Chair. The desk

Comfylap

The Comfylap is a bookholder, bed tray, and laptop computer table designed for use by individuals with mobility, neurological, or upper extremity disabilities. This lightweight, rectangular table is supported two legs, each of which has two locking joints in addition to the locking joint that connects the table to the leg. Each joint has an angle lock button. All of the joints can be adjusted so that the table can be used at a variety of heights and angles to provide a surface to serve as a lapt

Commercial Ada Concrete Table (Model Sw6012)

The Commercial ADA Concrete Table, model SW6012, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has seats on three sides with space for a wheelchair on the fourth side. There is an umbrella hole in the center. The table is made of steel-reinforced precast concrete with a smooth polish finish and Natura Stone seats and frames. DIMENSIONS (HxD): The table is 31 x 66 inches in diameter. The table top is 38 inches in di

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use his computer from his wheelchair. A purchased self-assembly desk was modified to accommodate a powered wheelchair. Two 100-millimeter-high panels were added to the bottom sides of the desk to increase the height and enable the user to get his feet under the desk. A plywood panel was added across the back to strengthen it and the shelf below the desk top was removed. A U-shaped notch was cut in the keyboard surface

Computer Desk Modifications

CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to use a computer desk. With the purchase of a new wheelchair, the individual found that his existing desk was too high for comfortable use. Since the desk legs were mounted on square wooden blocks,the optimal height was determined and 50 millimeters was cut off the bottom of each block. TITLE: Helpful Adaptations. JOURNAL: TAD Journal. REF: Volume 26, Number 4, January 2007: p. 18. PAGES: 2 (including cover).

Computer Table

The Computer Table is an accessible table for wheelchair users. The table's height is 29 inches to accommodate a wheelchair, and has a tabletop made of 3/4-inch plywood with a teak veneer. A monitor shelf is included at the rear of the table, and the legs consists of a set of standard folding table legs which will not interfere with the wheelchair's wheels. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for wheelchair users who cannot use standard computer desks because they are too low to wheel

Computer Tables (Models Hcp-4800 & Hcp-6000)

The HCP-4800 & HCP-6000 are computer tables and workstations designed specifically for wheelchair users. The main work area can be adjusted with a hand crank in order to accommodate a variety of wheelchair heights. This mechanism has an internal braking system. There are additional side brakes to insure stability of the table during operation. The workstations will accommodate a microcomputer, a monitor, a printer, external disk drives, printer paper, an expanded keyboard, and other necessar

Concord Ada Picnic Table (Model 07Eg1030)

The Concord ADA Picnic Table, model 07EG1030, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides and space for a wheelchair on one side. The table top is hexagon-shaped, with an umbrella hole in the center. The table is made from 100 percent recycled plastic. DIMENSIONS (WxH): The table top is 41 x 31.25 inches. Seats are 9.25 x 19 inches. The umbrella hole is 2 inches in diameter. WEIGHT: 330 pounds.

Convert-Able Table

The Convert-Able Table is a height-adjustable tilt top work table designed for use by children and adults with mobility disabilities. This table features interchangeable snap-on table tops that allow it to be used for a variety of activities, such as reading and writing, art, and sensory stimulation. The height adjusts to enable a child in a floor sitter or an adult in a wheelchair or stander to use the table. Features include a powder-coated steel frame, four-dual locking casters, push-button

Crawford Wheelchair Accessible Picnic Table (Model Kspb6Gpicada)

The Crawford Wheelchair Accessible Picnic Table, model KSPB6GPICADA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides with space for a wheelchair on one end. The table top and seats are made from 100 percent solid recycled plastic boards with UV stabilized color. The galvanized steel frame has cross braces for additional support. Stainless steel assembly hardware is included. DIMENSIONS (HxLxW):

Ctl Series Classroom Table

The CTL Series Classroom Table is a height-adjustable classroom table and computer work station designed for use by children who use wheelchairs. This table can be used in school computer labs. The work surface is made from high-density laminated wood and is supported by a powder-coated steel frame. OPTIONS: Enclosed CPU holder; keyboard drawer; keyboard arm and tray; modesty panel; wheel kit; surge protector; cable management kit; table to table cable connection kit; floor to table cable connec

Customized Table

CUSTOM ADAPTATION PURPOSE: To provide a customized table with a top level for a laptop computer and a lower slide-out lockable tray for a keyboard for persons with visual impairments, diabetes, and mobility disabilities who use a manual wheelchair. The table top and tray are made from plywood with pine surrounds, and the legs are solid maple. The legs have lockable casters so the table can be easily moved and stored when not in use. The tray slides back and forth in slots on either side, and i

Cut-Out Table And Foot Support

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with a work and play surface. Using an existing round table as a base, a removable square tabletop with a cut out in the center of each side was designed to be clamped on. Made of 18-millimeter (mm) thick MDF, the corners of the top were rounded and wooden cleats were fitted under each of the four sides. The cleats are turned and locked with T-bolts to secure the square top to the table. A platform of 9-millimeter plywood

Daessy Accessible Workstation - Double Surface Table

The Daessy Accessible Workstation - Double Surface Table is a height adjustable computer desk designed for use by individuals with mobility disabilities or spinal cord injury. This workstation has two independently height- adjustable surfaces with clear access underneath for a user seated in a wheelchair. The frame is made from welded, plastic-coated tubular steel, and the table surface is made from arborite laminated MDF board. OPTIONS: CPU bracket, double locking casters, front surface tilt an

Daessy Accessible Workstation - Single Surface Table

The Daessy Accessible Workstation - Single Surface Table is a height-adjustable computer desk designed for use by individuals with mobility disabilities, spinal cord injury, or low vision. The height-adjustable work surface makes this table accessible to a user seated in a wheelchair, while an optional keyboard surface allows users with low vision closer access to a monitor located on the main surface. The frame is made from welded, plastic-coated tubular steel, and the table surface is made fro

Deluxe Folding Personal Worktable

The Deluxe Folding Personal Worktable is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. This table is height- and tilt-adjustable and hand knobs adjust and secure its telescoping legs. The top tilts from 0 to 45 degrees. The scratch-resistant melamine top has a half-moon cutout for accessibility and an outer rim to protect against spills. The table folds flat for storage. DIMENSIONS: Table height adjusts from 29 to 44 inches. The tabletop measures

Desk And Television Cabinet

CUSTOM ADAPTATIONPURPOSE: To prevent children and adults with cognitive disabilities and poor impulse control from throwing the desk and television. Made of laminate for durability and ease of maintenance, this wall-mounted corner desk features a return on one side and a television cabinet bolted to the corner section. Wide support legs extend to the floor at either end and in the center. Loxson bolts anchor the desk to the wall and the cabinet to the desk. The cabinet is divided into two secti

Desktop Desk

The Desktop Desk is an adapted desk or table adapter designed for use by individuals with fine motor, orthopedic, or mobility disabilities. Placed on top of a table or other table-like surface, this lightweight, portable unit provides a large, stable writing surface with adjustable heights and angles. The unit's clear plastic, removable and erasable writing surface allows for templates to be used in writing practice or for tracing art. An accessory tray attaches to either side of the unit and pr

Diy Adjustable Tray

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself adjustable tray for a child with severe disabilities to use drawing, coloring, etc. This DIY tray is a PVC frame with a leg in the middle to allow for angle adjustment. The tray is created from a piece of shower board which is cut to the size needed. The child is then measured and a cutout added to go around the child. The PVC frame is a little smaller than the tray itself and is attached to the tray using Velcro. A drill an

Diy Computer Desk

---- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself accessible computer desk for an individual with Amyotrophic Lateral Sclerosis (ALS). This do-it-yourself computer desk is adapted from Sauder assemble-it-yourself furniture. First, the bookshelf was assembled according to instructions and necessary for getting the proper measurements for the height needed for the desktop. The desktop was constructed from 30 by 30 inch sheet of ¾ inch plywood. The length of the desktop can be

DIY Lap Desk Stabilizing Pad

Lap Desk Stabilizing Pad is a stabilizing component that has been added to a commercially available lap tray to provide a stable work surface and encourage upright posture. For individuals with limited posture, motor control as a result of a neurological incident.   It can be difficult for individuals to sit on a couch or in a recliner and read a book or magazine or write. With the lap desk stabilizing pad, the user sits on a piece of material with 4 buckles attached. The lap desk is buckled to

Duro-Med Plastic Bed Tray (Model 4070)

The Duro-Med Plastic Bed Tray, model 4070, is designed of heavy duty plastic with folding legs and a recessed well for glass. DIMENSIONS: (W x L x H) 15 1/4 x 21 3/4 x 8 1/2 inches. COLORS: almond, blue, white.

E-Z Glide Series Adjustable Table Bases

The E-Z Glide Series Tables are accessible tables and adjustable-height work tables designed for people who use wheelchairs. The 1700 Series adjusts from child to adult height, the 1800 Series adjusts from standard to wheelchair height, and the 1900 Series adjusts from restaurant to bar height with a stop at standard wheelchair height. The E-Z Glide mechanism incorporates a patented design and gas cylinders to facilitate table adjustment. A knob adjustment allows the tables to change heights and

Easy Adjust Overbed Table (Model 6411)

Chrome plated square tubular leg and base, 4 casters. Spring tension height adjustment with positive corner lock, 27 to 44 high. Table surface, 15 by 30 inches. Tilts either direction, plunger release lock, 5 positions.

Edutray

The Edutray is a tray for armchair designed for use with an an Educube (see separate entry) to provide a play or eating surface close to the child. The legs fold for storage. DIMENSIONS (LxW): 21 x 14 inches. WEIGHT: 7 pounds. COLOR: Blue and white.

Electric Height Adjustable Activity Table

The Electric Height Adjustable Activity Table is a powered height adjustable work table designed for use by individuals who use wheelchairs. Height adjustment is achieved with push-button controls. Both models have a laminate top and an extruded aluminum base. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 28 to 34 x 60 x 30 inches. COLOR: Maple top. WARRANTY: Two-year warranty.

Electric Work Table (Model 4375)

The Electric Work Table, model 4375, is a powered height adjustable work or therapy table designed for use by wheelchair users. This height-adjustable table has a direct-drive lift mechanism that elevates the tabletop and a pedestal design that allows wheelchair access, and a hand-control panel mounted on the underside of the tabletop. The table has a high-pressure laminate top with a natural oak finish and protective molding along the edges. It can can accommodates two wheelchairs and up to fiv

Equity (Model 1317)

The Equity, model 1317, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individulas who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has laminate tops, anodized a

Equity (Model 4240)

The Equity, model 4240, is a bi-level computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, provides access for individuals who stand or use standing aids while working. The worksurface/ keyboard level and the upper monitor level are independently height adjustable. The standard table has a laminate tops, anodized

Equity (Model 4830)

The Equity, model 4830, is a single-surface computer work center and height adjustable work table designed for use by individuals who use wheelchairs in schools, colleges, and other multi-user environments. The height adjustment, which is accomplished with a retractable hand crank, also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatme

Ergolife Tablet Dining Table(Model Gc3-42)

The Ergolife Tablet Dining Table, model GC3-42, is a wheelchair accessible table designed for use in cafeterias or in family, common, activity or dining room settings in long term care facilities and hospitals. The table is pre-drilled so an optional tablet can be attached on any side for wheelchair access. Tops are available in solid hardwood, melamine, or high pressure laminate. The legs are heavy duty steel. DIMENSIONS (HxDxW): 29.5 x 42 x 42 inches. Custom heights are available.

Evolution Desk With Adjustable Legs

The Evolution Desk with Adjustable Legs is a height-adjustable desk designed for use by individuals who use wheelchairs. This desk has adjustable legs that match the perforated steel panels with holes in one-inch increments. The work surface is covered with laminate which wraps around the full bullnose style front edge. OPTIONS: Flat panel monitor arm, adjustable CPU sling. DIMENSIONS(WxD): 36 x 30 inches, 44 x 30 inches, 48 x 30 inches, 60 x 30 inches, and 72 x 30 inches. The height adjusts fr

Extended Easel (Models Ee100, Ee100D, Ee200D, & Ee200S)

Extended easel functions as three different pieces of furniture. Floor easel is designed for child for long sitting activities. Raised book edge holds material at a 20 degree angle and also adjusts to a horizontal plane for play. Adjustable leg set converts floor easel into a portable desk adjustable from 21 inches to 27 inches in height. Capable of converting to horizontal setting. Intermediate size converts easel to a smaller desk 14 inches to 21 inches in height. The seat block converts floor

Extended Tray Easel

Extended easel tray has a 20 by 24 inch surface with a 14 1/2 inch cutout. Designed to interface with the TherAdapt Mini- or Primary Cube Chairs and the Mini-Prone Stander. Top adjusts to 30 degree angle. The large model is 28 inches wide by 23 inches deep with an 18 1/4 by 4 1/2 inch cutout. Three types of legs are available for both sizes: 9 to 15 inches high, 15 to 21 inches high or 26 to 32 inches high.

Ez Care Height Adjustable Overbed Table (Model Ez-110550)

The EZ Care Height Adjustable Overbed Table, model EZ-110550, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a laminate top and an H-frame base with four swivel casters. It can be turned for either right- or left-hand use. The height is adjusted using a one-touch release lever, and gentle pressure on th

Ez Care Height Adjustable Pivot And Tilt Overbed Table (Model Ez-110500)

The EZ Care Height Adjustable Pivot and Tilt Overbed Table, model EZ-110500, is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This table has an open frame base to slide under the bed or for wheelchair accessibility. It has a laminate top and a C-frame base with four swivel casters. The table is supported by a height-adjustable column that angles upward toward the user from the right side of the frame. The table top tilts to

Feeding Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding tray which fits against the child, will not slide away, and holds a plate in place. Instructions for building a table-top feeding tray of plywood (12 by 12 inches) with a rounded cutout on one side to fit against the child, a batten fastened on the underside, without interfering with the cutout, to keep it from sliding away, and 4 wood plate stops with turn buttons to hold the plate in place. Includes list of materials and drawings. SKILLS REQU

Fixed Height Ada Desk

The Fixed Height ADA Desk is a computer desk designed for use by individuals who use wheelchairs. The scratch-resistant work surface has a a smooth, rounded solid oak front edge and an oak chair rail to prevent hardware from sliding off. A hinged "Flip-Top" door runs the entire length of the work surface for access to cords and cables. A cable channel hides and protects cords and cables. DIMENSIONS (HxWxD): 32 x 44 x 30 inches. COLOR: The standard color combination is an oak work surface and pu

Flaghouse Height Adjustable Personal Worktable

The Personal Worktable is a height-adjustable work table designed for use by children and adults who use wheelchairs. It can be used as an accessible desk or small activity table. The table height is adjusted by turning the admustment knobs on the legs. DIMENSIONS(HxLxW): The height can be adjusted from 23 to 33 inches and the work surface measures 36 x 30 inches. COLORS: Maple finish laminate top with almond powder-coated base.

Flextable (Model A)

The FlexTable, model A, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate four people, has four height-adjustable work stations mounted on the ends and each side of a rectangular base. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENSIONS (LxW)

Flextable (Model B)

The FlexTable, model B, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate six people, has six height-adjustable work stations mounted on a rectangular base, one on each end and two on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed. DIMENS

Flextable (Model C)

The FlexTable, model C, is an adjustable height tilt top table designed for use by individuals with lower extremity or mobility disabilities and others with special seating needs. This table, which is designed to accommodate eight people, has eight height-adjustable work stations mounted on a rectangular base, one on each end and three on each side. The side stations also tilt. The end stations are removable. The base rests on 4 4-inch lockable casters so the table can be positioned as needed.

Flip-Up Table

CUSTOM ADAPTATION PURPOSE: To provide a mobile table that can be moved close enough to a person seated in an armchair to be used for eating or working. Elongate the crossbar of the base of a hospital bedside table to increase the width of the base to be slightly wider than an armchair. If necessary, lengthen the table's vertical support to adjust the table's height. MATERIALS: One hospital bedside table and additional tubing. TITLE: Doing It Yourself. AUTHOR: Wechsler, K. JOURNAL: Quest. WEB SI

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Floor tray table designed for use with floor seat provides writing area with extra support. Tray table top is constructed of 12 inch by 16 inch plywood board. Side panels measure 12 inches by 12 inches. Softwood battens can be glued inside side panels about 1 1/2 inches from top of tray. Front edge of tray can be cut out to fit child. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, Englan

Floor Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Small floor table so a child can sit leaning against the wall or other furniture and play with other children who are playing on the floor. Table made of 12 by 24 inch plywood, with sides which allow the table to stand 10 inches off the ground and provide 2 inch edges, with a 2 inch edge along the front. A section can be cut out to allow the table to fit partly around the child's body. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make

Folding Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bed table which can be folded flat for storage. Instructions for building a bed table with hinged legs. The table is made of plywood. Includes diagrams, drawings and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Grainger, S E TITLE: Making Aids for Disabled Living REF: North Pomfret, Vermont: Batsford: p 80-86 NARIC CALL NUMBER: R1126 PAGES (including cover): 8 1981.

Folding Walsall Trolley

The Walsall Folding Trolley is designed for use by individuals with limited endurance and coordination as a result of multiple sclerosis, cardiac surgery and stroke.  This trolley can be folded away for transport or storage.  It is ideal in a smaller home or kitchen, where space is at a premium. Ideal for safely moving hot meals or drinks around the home, the trolley is equipped with four large castors making it easy to control and position by the user even on carpeted or slightly uneven floors.

Folding Wheelchair Table

The Folding Wheelchair Table is a height-adjustable tilt top work table designed for use by children and adults who use wheelchairs. Features include a chrome-plated steel frame and side braces to ensure stability and a laminated, scratch-resistant woodgrain surface. The table can also accommodate tilt tables and it folds for storage and transport. DIMENSIONS: The height adjusts from 29 to 44 inches. The top is 30 x 40 inches, and the top tilts up to a 45 degree angle.

Four Place Child Cut Out Table Kidney Shape (Model 354)

The Four Place Child Cut Out Table Kidney Shape, model 354, is a semi circular, kidney shaped table. The table features wood grain laminate, scratch resistant top and five legs for stability. The table accomodates seating for four children with amble space for each child to work. Also makes an excellent feeding station. DIMENSIONS (HxWxL): 24 x 29 x 96 inches; cut outs are 6 x 9 inch (1 each), 7 x 10 inches (2 each), and 8 x 12 inches (1 each).

Generation Iv Adjustable Work Tables

Generation IV Adjustable Work Tables are height adjustable work tables designed to provide a completely accessible work station for individuals with a physical disability. These work tables are ideal in that they offer individuals a maximum design of flexibility and adjustability which includes working in a sitting or standing position. They are available as rectilinear or corner - bilevel or single surface tables. Bilevel tables allow you to adjust the height of the keyboard and the VDT height

H Base Overbed Table (Models 11600 & 11610)

The H Base Overbed Table, models 11600 and 11610, is an overbed table designed for use by individuals with mobility or severe physical disabilities. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches. CAPACITY

Heavy Duty Mobile Adjustable Height Wheelchair Table (Model 375)

This adjustable height work table can accommodate both children and adults. Its features include a chrome plated steel frame, ball bearings, and 3-inch locking rubber swivel casters. It is equipped with side braces to assure stability. The table top is a wood grain laminated, scratch resistant surface. It can be used with wheelchairs and tilt tables. DIMENSIONS: Height adjusts from 26 to 34 inches, the top is 30 x 36 inches with a 5 1/2 x 20 inch cut out, the top tilts to a 45 degree maximum.

Height Adjustable Table

The Height Adjustable Table is a height adjustable work table designed for use by individuals with low vision for comfortable viewing of a video magnfier/CCTV. This wide table offers space for moving a CCTV viewing tray while holding papers and other materials. DIMENSIONS (LxWxH): 24 x 48 x 22.5 to 32 inches.

Herman Miller Scooter

The Herman Miller Scooter, model FD830, is a height adjustable tilt desk designed for use as a keyboard holder or desk by people with physical disabilities. This desk is designed to fit over the lap of the user and adjust to the optimal height and angle for working comfort. The sculpted cherry top features a divided lip to keep books and papers from sliding and a slight center indentation to allow the desk to fit over the lap. The top can be used flat or be angled using the lever beneath it. Th

Hexagonal Picnic Table - Wheelchair Accessible (Model Ohtha)

The Hexagonal Picnic Table - Wheelchair Accessible, model OHTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This six-sided table has space on one side for a wheelchair. The frame, seats, and table top are made from 100 percent recycled plastic, with stainless steel hardware. The table also includes an umbrella hole. DIMENSIONS (HxW): The table top is 30.5 x 40 inches. The seats are 17.5 x 9.5 inches. The umbrella hole is 2 inche

Horseshoe Therapy Table

The Horseshoe Table is a wheelchair-accessible manual height adjustable therapy table designed for clinic use. The Horseshoe-shaped table accommodates up to four users in wheelchairs and is equipped with seven height-adjustable metal legs and a plastic-laminated top with a cutout. DIMENSIONS: The cutout is 30 x 36 inches and the height adjusts from 26 to 34 inches.

Individual Cut Out Table (Model 300)

The adjustable offset legs of this cut out table allows patient to sit almost in the center of the table. The cut out table can be adjusted for both sitting and standing patients and can be used with standing stabilizers. An attached door which swings out or down can lock the patient safely in place. The table is made of wood grain laminate and has scratch resistant top. DIMENSIONS: Height adjusts 21 to 33 inches, top size is 24 x 30 inches with cut out 7 x 10 inches. Adult, child and pediatric

Individual Tilt Work Table (Model Pc 5358-02)

The Individual Tilt Work Table, model 535802, is a height adjustable, accessible tilt-top work table designed for use by people who use wheelchairs. The manual crank adjusts the height of the telescoping legs and the top tilts to any angle between 0 and 50 degrees to accommodate tasks and individuals. The unit includes the table and a tray/shelf extension with a cut out. DIMENSIONS: The tabletop is 35 x 24 inches and the tray attachment is 11 inches. The height adjusts from 22 to 30.5 inches.

Infinity Series (Models 6030, 4830, & 6024)

The Infinity Series, models 6030, 4830, and 6024 are computer work centers and height adjustable work tables designed for use by individuals who use wheelchairs. The motorized height adjustment is activated with a push button and also provides access for individuals who stand or use standing aids while working. The standard table has a laminate top, anodized aluminum pedestal, and steel feet. OPTIONS: Solid wood veneers, PVC vinyl edge treatments, casters, plastic glides/levelers, under desk com

Jobri Mobile Desk Caddy (Model F7300-Xx)

The Jobri Mobile Desk Caddy, model F7300-xx, is a height-adjustable tilt top table that can be used with a recliner or as a freestanding unit. This mobile desk caddy has multiple combinations of height and tilt adjustments, and can be used to hold a laptop or book or for writing. Locking casters help keep it in place and a full lip on the table top keeps items from sliding off. It holds up to 25 pounds. DIMENSIONS: The tabletop adjusts from 30 to 39.5 inches high with a table surface of 16 x 31

Kaye T-Tables (Models Tt-1 & Tt-2)

The Kaye T-Tables are tilt top tables designed for use with children with neurological or fine motor disabilities. Designed to be used in conjunction with Kaye Adjustable Benches, T-Seats, or Straddle Seats, these height-adjustable wooden tables have tilt tops equipped with tow large wooden clamps to properly psition books and papers and a removable wooden ledge to keep items from sliding off the table when tilted. The table top adjusts from horizontal to 90 degrees. Model TT-2 accommodates chil

Lap Desk

DO IT YOURSELF ENTRY --- PURPOSE: To provide a writing or work surface for individuals using a wheelchair or who are unable to use a desk for long periods. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a lap desk from Luan plywood. A prototype of the desk is cut out of corrugated cardboard to determine the proper dimensions for the chair with which the lap desk will be used. When complete, the desk

Laptop Laidback Ergonomic Laptop Table

The Laptop Laidback Ergonomic Laptop Table is a bed desk that allows laptop users to be completely reclined. The height and angle of the laptop table surface can be micro-adjusted to accommodate an individual’s body size and arm length. The ergonomic design of this laptop table keeps the user's arms and elbows in a flat resting position while allowing the palm and fingers to lie flat on the keyboard.

Liberty Adjustable Desk

The Liberty Adjustable Desk is an accessible computer desk designed for use by individuals who use wheelchairs. This height-adjustable desk has a metal frame, legs, and rear modesty panel. The scratch-resistant laminate work surface has a solid oak smooth, rounded front edge and a rear oak chair rail to prevent computer hardware from sliding off. This desk also features a hinged "flip-top" door that runs the full length of the work surface for access to the cable channel. The desk is available

Lil' Desk Mate

The Lil' Desk Mate is a height adjustable tilt desk designed for use by individuals with physical disabilities. This height-adjustable desk features a wide T-shaped base with locking casters and a two-section table top. The desk adjusts for right or left hand use. The smaller section of the table is fixed in a flat position, while the other can be used flat or tilted to support laptop computers, books, or papers. The Lil' Desk Mate's base can roll under most sofas, chairs or beds to position the

Low H Base Overbed Table (Model 11640)

The Low H Base Overbed Table, model 11640, is an overbed table designed for use by individuals with mobility or severe physical disabilities whose bed has low clearance. The table has a four point H-shaped base with four dual wheel nylon casters, two of which lock. Plastic glides are also included to replace the casters. The table also features spring-loaded height adjustment. DIMENSIONS(LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height with casters adjusts from 19.75 to 2

Making A Wheelchair Worktable.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Accessible height table with body cutout for wheelchair users. Wooden table with legs high enough to clear a wheelchair. Body cutout to allow person to get closer to work. Backboard and sideboard help prevent things from falling off the back of the table. Instructions includes dimensions and how to secure the legs. Includes drawings. SKILLS REQUIRED:Simple woodworking. TITLE: Home Improvement and Repair: Special Purpose Rooms REF: Book: Time Life Books

Manual Height Adjustable Work Table (Model 8858A)

The Manual Height Adjustable Work Table, model 8858A, is an accessible table or workstation designed for use by individuals who use wheelchairs. Made with double pedestals to accommodate wheelchair users, the table height adjusts by means of a fold-away hand crank extending from the pedestals. The table features a wide laminate top that allows for extra work space. OPTIONS: Maple, formica, or steel table tops are available. DIMENSIONS: The top is 36 x 60 inches and the height adjusts from 26 to

Manual Height-Adjustable Activity Table

The Manual Height-Adjustable Activity Table is an accessible table or computer workstation designed for use by individuals who use wheelchairs. The table height adjusts with a hand crank system. The table has a laminate top. DIMENSIONS (HxLxW): 27 to 39 x 48 x 30 inches or 27 to 39 x 60 x 30 inches.

Marathon Table

The Marathon Table is a height-adjustable computer workstation designed for use by individuals who use wheelchairs or who stand to work. Depressing a release paddle enables immediate, yet controlled, surface height positioning. A two-way brake locks the work surface in both upward and downward directions. For user safety, a weight-sensing interlock releases the brake only when the table is properly counterbalanced. Counterbalance supports loads between 75 and 225 pounds, allowing immediate adjus

Marsh Handicap Furniture

Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.

Med I

Accessible all purpose table has nickel chrome legs with twin wheel casters, 2 locking and 2 nonlocking. One piece molded top has slate look finish; measures 24 inches by 36 inches. Has 5 adjustable leg heights from 27 inches to 33 inches. Available in standard colors; custom colors extra.

Med Ii, Med Iie, Med Iif.

Accessible U shaped activity table. One piece molded fiberglass top is 18 inches wide with slate look finish. Available in standard colors; custom colors extra. Outer measurements are 72 inches wide by 48 inches deep; inner measurements, 36 inches wide by 30 inches deep. Med II has twin wheel casters, 2 locking and 3 nonlocking; five leg height adjustments from 27 inches to 33 inches. Med IIE has telescoping legs held in position with thumb screws; legs are equipped with plastic end caps. Med II

Med Iii Adapted Oval Patio Table

Accessible table. Adapted oval patio table accommodates 4 wheelchairs between 4 attached stationary seats. 14 gauge tubular steel frame and legs have zinc and dry powder coating. Stain and heat resistant. Optional built in umbrella mount. Table available in standard colors; custom colors extra. Umbrellas available in matching colors. Maximum width 69 inches; maximum length 78 inches; 31 1/2 inches between stationary seats.

Med Iv Dining And Activity Table

Four place dining and activity table accommodates wheelchairs with elevated leg rests. Wheelchairs may be staggered or placed all on one side. Nickel chrome legs have twin wheel casters, 4 locking and 2 nonlocking. One piece molded top is heat and stain resistant; measures 104 inches by 20 inches; has slate look finish. Leg height adjusts to 27 inches, 28 1/2 inches, 30 inches, 31 1/2 inches or 33 inches. Available in standard colors; custom colors extra.

Midland Child / Adult Combination Work Table (Models 7082)

The Midland Child/Adult Combination Work Table is a height adjustable tilt top work table with a cut out designed for use by children and adults who use wheelchairs. The table features a rimmed maple tabletop that tilts to any angle up to 45 degrees and a tubular steel frame on a U-base with locking swivel casters. Model PC 7082 ($1349) is crank-adjustable. DIMENSIONS: The table surface is 26.5 inches square and the height adjusts from 24.5 to 31 inches. The casters are 3 inches in diameter.

Midland Combination Work Table (Model 7081)

The Midland Combination Work Table, model 7081, is a height adjustable tilt top worktable designed for use by individuals who use wheelchairs. Designed for use with tilt table or wheelchair, this adjustable height table accommodates children and adults. The table top may be tilted to various positions with a 45 degree maximum tilt. Features include tubular steel frame mounted on 3- inch swivel casters with locks. DIMENSIONS: Height adjusts from 26 to 40 inches. Table top is 30 by 36 inches.

Midland Round Work Table (Model 8859F)

The Midland Round Work Table, model 8859F, is a height adjustable, swivelling work table designed to accommodate up to four wheelchair users. The table features a solid wood butcher block top on a metal pedestal with a hydraulic lift mechanism. DIMENSIONS: The height adjusts from 27.5 to 34 inches and the top is 48 inches in diameter. The base is 24 inches in diameter.

Midland Wheelchair Work Table (Model 7080)

The Midland Wheelchair Work Table, model 7080, is an adjustable height tilt top table designed for use by individuals with mobility disabilities. This table has a chrome plated steel frame and swivel casters fitted with step-on brakes. The table fits over any wheelchair. The Formica tray has a raised rim, and tilts to a 45-degree angle. Table is latex free. DIMENSIONS (HxLxW): 28 to 39 x 32 x 36 inches. Cutout is 22 x 6 inches. Base measures 34 inches in width and 26 inches in depth.

Mjm Portable Overbed Table With Casters (Model 699-F3)

The MJM Portable Overbed Table with Casters, model 699-F3, is an overbed table designed for use by individuals with severe physical disabilities or spinal cord injury. The frame is made from PVC plastic. DIMENSIONS (HxLxW): 28.5 x 46 x 19 inches. The table top is 19 x 25 inches.

Mobile Dining Table

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with multiple sclerosis to transport meals and eat comfotably in a small apartment. A rolling table was built from melamine coated wood that fit comfortably in the space between the living room and the kitchen. The table has two shelves beneath the eating surface, one accessible from both sides and the other from the kitchen side only. Designed to be easy to clean and move, the table is equipped with four double-wheeled furniture c

Mobile Open Toe Overbed Table (Model 251C)

The Mobile Open Toe Overbed Table, model 251C, is an overbed table designed for individuals who spend long periods of time in bed or who use wheelchairs. Constructed of durable plastic- coated one-inch tubing, this height- and tilt- adjustable table has a U-shaped base with casters and a laminated teak wood top with raised edges on each side. Two durable plastic hand wheels enable the user or caregiver to raise or tilt the table allowing the top to be set at varying heights and angles. DIMENSION

Model 100 Workstation

The Model 100 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs.The unit features a steel frame, a height-adjustable worksurface, an EasyRoll wheelchair platform, and a ramp. This desk is available with either manual hand crank or a motorized height adjustability of the worksurface. Hand crank models have a foldable hand crank (.5 inches of adjustment per revolution) and the motorized models have push button controls. The works

Model 200 Workstation

The Model 200 Workstation is a height adjustable desk or computer work center designed for use by individuals who use wheelchairs. The unit features an aluminum frame, a fixed height worksurface with a backsplash, an EasyRoll wheelchair platform, and a ramp. The worksurface is made from plywood with WilsonArt plastic laminate. The ramp and platform are covered in nonskid rubber. The workstation includes an EasyRoll wheelchair platform, which allows the user to move laterally for the length of t

Multi-Purpose Table

The Multi-purpose Table is designed to provide eating and work space for individuals who are in bed for extended periods or who require a mobile work surface. This height-adjustable table can be used over chairs or bed and features a wipe-clean Formica top that can be used flat or tilted up to 180 degrees and a wooden T-shaped base with three casters. DIMENSIONS: The height adjusts from 29 to 38 inches. The table surface is 25.5 x 14.5 inches. WEIGHT: 25 pounds. COLOR: Woodgrain top.

Multi-Purpose Table

The Multi-Purpose Table is an overbed table designed to permit activities and eating while in bed. This table has a metal C-shaped base with casters and a two-section, height-adjustable table top. The table has a small stationary section and a larger tilt-top section with a plastic lip to prevent items from sliding or rolling off. DIMENSIONS: The height adjusts from 27 to 42 inches. The table top is 15 x 30 inches.

Multiple Place Cut Out Table (Model 6254)

Table with 4 cut outs to provide individualized table work space for 4 children. Height adjusts from 23 to 36 inches. 2 cutouts are 8 inches by 13 inches and 2 cutouts are 8 inches by 16 inches. Overall size is 96 inches long and 30 inches wide. Tabletop is heavy duty plastic. Useful for children in wheelchairs for sliding chairs close to table.

My Place Laptop Table

The My Place Laptop Table is a notebook or laptop computer support and bookholder designed for use by individuals with mobility or upper extremity disabilities. This lightweight work station can be used while seated in a chair or reclining in bed for writing, using a laptop, reading, doing crafts and more. It has fold-out legs, which adjust to set the tabletop at the optimal height. The tabletop has two panels, the angle of which is independently adjustable. The left panel is designed to hold th

Newstead Standard Trolley

Newstead Standard Trolley is designed for use by individuals with limited lower extremity mobility and balance as a result of dystonia, multiple sclerosis, or stroke.  The lower shelf is cut away at the handle end to make walking with the trolley easier and safer.  The far ends of the shelves are left without a lip to facilitate the transfer of items on or off the trolley.  It has four swivel castors with the rear two being lockable.

Non-Slip Tray (Model Ha-4255)

The Non-Slip Tray, model HA-4255, is designed for use by individuals with balance, neurological, or upper extremity disabilities. This tray holds items without slippage at angles of up to 30 degrees. The tray is made with layers of wood veneer combined with synthetic resin to provide strength, with a non-slip coating which prevents items from sliding. DIMENSIONS: 360 x 280 millimeters. WEIGHT: 230 grams.

Over The Bed Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Over the bed table which can be used for hobbies or building small items. Wood table with edges on three sides. Provides a list of the pieces of wood needed and includes a diagram of how the table is put together. Exact size depends on the height of the bed and the person seated in it in a working position, and the width of the bed. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souveni

Over-Chair Table

CUSTOM ADAPTATION PURPOSE: To enable an individual with Parkinson's disease to engage in a variety of activities while seated in his recliner. The customized table has a large plywood base that fits under the chair and is held in place by the weight of the chair. The chair's castors slot into small holes in the base, holding both the chair and the table completely stable. A post with a spring-loaded carriage that moves up and down from a gym set was mounted to the base. The table support was br

Overbed Table

The Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs. This height-adjustable table has an open frame base to slide under the bed or for wheelchair accessibility. The table has a wipe-clean laminate top with a built-in cup holder, and a C-frame base with four swivel casters. It can be converted for either right-hand or left-hand use. DIMENSIONS: The height adjusts from 28.25 to 42.25 inches. The table surface is

Overbed Table (Model 1010C)

Model 1010C is an overbed table with a laminated top, steel frame, and 1.5-inch ball bearing casters. Table height is automatically adjustable from 28 to 45 inches. The adjustment mechanism is spring-loaded to lift with slight upward pressure. A release lever will adjust the table height downward. Supports up to 50 pounds. Brakes are an available option. DIMENSIONS: Top surface is 15 x 30 inches.

Overbed Table (Model 1050)

Model 1050 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top surface tilts in both directions to maximum of 22 degrees for food service, reading, and craft work. DIMENSIONS: Top is 15 x 30 inches; height adjusts from 29 to 44 inches.

Overbed Table (Model 925)

Model 925 is a tilt-top overbed table with a laminated top, chrome plated steel frame, and 1.5-inch hooded ball casters. The top tilts to 22 degrees in either direction for food service, reading, and craft work. DIMENSIONS: Top surface is 15 x 24 inches, height is adjustable from 25.5 to 39 inches.

Overbed Table (Models 3000 & 4000)

Model 3000 and Model 4000 are overbed tables. Each has a laminated top, steel frame, and 1.5-inch ball bearing casters. Model 3000 has semi-automatic height adjustment from 30 to 45 inches; Model 4000 has fully automatic height adjustment. A spring-loaded positioning lever allows the table to be positioned in any of 16 slots with 1-inch increments. The tables will support up to 100 pounds. DIMENSIONS: Top surface is 15 x 30 inches.

Pediatric Adjustable Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table which can be folded against the wall and can be adjusted in height from 18 1/2 to 32 1/2 inches so it can be used by children and adults. Describes hinged table which moves up and down a track on a backboard on the wall. The table can be adjusted by one person. Includes a drawing and photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Rousseau, Y TITLE: Pediatric Adjustable Table JOURNAL: Canadian Journal of Occupational Therapy REF: Vol 51 no 3,

Personal Work Table With Tilt Top (Model 76-31K)

The Personal Work Table with Tilt Top, model 76-31K, is a height-adjustable tilt top work table designed for use by individuals who use wheelchairs. The top tilts from 0 to 50 degrees and is equipped with a lip on the front edge to keep objects in place. The legs are adjustable with an indexing plunger. OPTION: 3.5-inch locking dual-wheel casters. DIMENSIONS (HxLxW): 23 to 33 x 36 x 30 inches.

Picnic Tables (Wct8 Series)

Accessible picnic table. Tubular galvanized steel frame. Wooden or anodized aluminum top and seats. Tabletop extends out 12 inches on each end. DIMENSIONS: 8 feet x 4 feet 9 inches x 31 inches high. WEIGHT: 184 pounds.

Picture Frame Restoration Workstation

DO IT YOURSELF ENTRYPURPOSE: To enable individuals with spinal cord injury or severe physical disabilities to restore picture frames without bending or lifting. The custom-designed workstation consists of a worktable that includes a separate revolving grid that provides an indexed tilting mechanism and 350-degree rotation. This provides the user full appropriate positioning of the frame without the need to bend over the table or lift. The table accommodates a standing worker and a height-adjust

Play Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tray to protect table top or floor while child plays. Plywood tray 12 by 24 inches with 2 inch edging around 3 sides, and strips cut from a cork tile glued on the underside. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Toys for Your Handicapped Child REF: London, England: Souvenir Press: p 158-159. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R3463 PAGES (including cover): 2 1983.

Plaza Pedastal Square Picnic Table - Wheelchair Accessible (Models T46Rcped-3S & T46Rcped-3Sm)

The Plaza Pedestal Square Picnic Table - Wheelchair Accessibleis a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This table has seats on three sides with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame, with table tops and seats made of plastic-coated steel. The table top has a hole for an umbrella. Model T46PED-3S is designed for in-ground mounting, and model T46PED-3SM is designed for surface mo

Plaza Square Picnic Table - Wheelchair Accessible (Model T46Rcpedpor3)

The Plaza Square Picnic Table - Wheelchair Accessible, model T46RCPEDPOR3, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This portable table has three seats, with space for a wheelchair on the fourth side. It has a one-piece powder-coated steel frame with a plastic-coated steel table top and seats. The table top features an umbrella hole. DIMENSIONS (HxLxW): The table top is 31 x 46 x 46 inches. The seats are 18 x 38 x 10.5 inches.

Portable Achievement Carrel (Model 903A)

The Portable Achievement Carrel, model 903A, is a desktop study carrel designed for use by children with communication, learning, or behavior disabilities. This portable carrel creates a semi-private tabletop space to help students concentrate on their work by controlling their surroundings, including the visual environment, light, and sound. The carrel has a back panel and two side panels with optional windows, an angled work surface with an 18-degree slope, a reading easel with a dry erase sur

Portable Changing Table For Older Children

CUSTOM ADAPTATIONPURPOSE: To provide a changing table for children ages 5 to 9 with incontinence who are too big for a regular changing table. The table base is a rectangular piece of medium-density fiberboard, 145 centimeters (cm) X 75 cm. Four pieces 19 millimeter (mm) plywood, 12 cm high, are attached to the edges of the table base to form a box into which a vinyl covered 70 mm foam mattress is placed. Collapsible legs, 85 cm high, are attached to the bottom of the table base. 10 cm leg exten

Positioning Table

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. This table is designed to provide the child with proper postural positioning while allowing the child to concentrate on eating, playing, or educational activities while at the table. The table was made of plywood to dimensions specified by the child's therapist and provides space for two children. The table is height adjustable and has a torso cutout at one end to provide the child with close ac

Precast Concrete Round Table - Wheelchair Accessible (Model Rotsh)

The Precast Concrete Round Table - Wheelchair Accessible, model ROTSH, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This round table has three seats with space for a wheelchair on the fourth side. It is made of steel-reinforced concrete with a smooth base and a polished table top and seats. OPTIONS: Umbrella hole. DIMENSIONS: The table is 30 inches high with an outside diameter of 56 inches. The table top diameter is 38 inches. Th

Raised Desk

DO IT YOURSELF PURPOSE: To enable individuals with spinal cord injuries or back pain to use a standard desk from a wheelchair, kneeling chair, or while standing. This desk is created by replacing the standard legs on a conventional desk with extra-long table-style legs. Each leg replacememt is kept rigid by two half-inch flat steel braces made of 0.5 x 1/8 inch steel bar. The top end of the steel is fastened to the desk with wood screws and the bottom ends are fastened to the legs with hose cl

Raised Height Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Blocks to raise the height of a table so a wheelchair can pull up to it. Describes table raisers made of wooden blocks the desired height, and pieces of 1 inch thick wood with holes the size of the table legs drilled in them, glued together. A nonslip pad can be glued on the bottom. SKILLS REQUIRED: Woodworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Independence Factory: p 17 NARIC CALL NUMBER:

Rehabilitation Table

The Rehabilitation Table is a height-adjustable tilt-top work table designed for use by individuals who use wheelchairs. The base is equipped with a modesty panel and is constructed of 18 gauge steel. The table has a laminate top with a raised edge and a cutout for access. The tilt angle adjusts from 0 to 35 degrees. The table has four caster for mobility and two of the casters lock. DIMENSIONS (HxDxW): The top is 0.75 x 30 x 40 inches. Table height adjusts from 29 to 44 inches. COLOR: Grey top

Reversable Activity/hand Therapy Table (Model 6272)

The ReversABLE Activity/Hand Therapy Table is a wheelchair- accessible manual height adjustable therapy table designed for clinic use. This table combines a hand therapy with an activity board and accommodates two users. The activity board inserts rotate 360 degrees and have a laminated surface on one side and an oak pegboard with 100 holes on the other; the inserts can be locked flat or at a 60-degree angle. A set of 200 easy-grip stackable pegs is included. DIMENSIONS: The front radius is 94 i

Rfi Multi-Use Desk / Table.

Adjustable height worktable from 21 to 34 inches. 44 inches wide by 24 inches deep. Red oak frame, contoured matching laminate work surface. Designed spill rail, prosthetic device holder, side mounted book caddy. Accommodates children and adults.

Rifton Multidesk (Models E270 & E280)

The Rifton MultiDesk, models E270 and E280, is an accessible table designed for use by individuals who use wheelchairs. Available with a tilt or fixed flat top, these tables have curved cutouts for access and are height adjustable without tools. The tilt-top models have a table top that tilts upward with a double-latching mechanism in 5-degree increments, from 0 to 30 degrees. A book ledge keeps items positioned when top is tilted. OPTIONS: Three- or five-inch deep top-opening book boxes that at

Rubbermaid Adjustable-Height C-Frame Overbed Table

The Rubbermaid Adjustable-Height C-Frame Overbed Table is designed to provide eating and work space for individuals who are in bed for extended periods or who use wheelchairs Constructed of molded composite plastic, this height-adjustable table has a C-frame base to slide under the bed or for wheelchair accessibility. The table converts for right-or left-handed use and features a large wipe-clean worksurface with a molded-in cup holder and four easy-roll casters. DIMENSIONS: The height adjusts f

Runged Tabletop

CUSTOM ADAPTATIONPURPOSE: To provide children unable to stand without support with a table incorporating grips that provide support when standing or sitting. The rectangular tabletop is fitted to the base of a height-adjustable table and is made from a single piece of 12-millimeter (mm) plywood. On each lengthwise half of the tabletop, two sets of 37-centimeter (cm) long slots are cut using a router. These "rungs" are two cm wide on one half and three cm wide on the other to accommodate differen

Saturn Square Ada Picnic Table (Model T46Ebperf3P)

The Saturn Square ADA Picnic Table, model T46EBPERF3P, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. The table has benches on three sides with space for a wheelchair on the fourth side. The table has a high-gloss surface with smooth rolled edges and an umbrella hole in the center. It is made from 11-gauge punched steel with a plastic-coated top and seats. DIMENSIONS (HxLxW): 18 x 46 x 46 inches. The seats are 38 inches long by 12 i

Sensory Table

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted sensory table for children of different ages with hearing or visual disabilities. An adjustable table with a round wooden top, a metal frame, and adjustable legs was used for this adaptation. The top of the table was removed from the frame and four indents were cut into the sides of the table allowing four children to stand supported at the table. A plastic container was fitted through a hole cut in the table top and the sq

Sewing Machine Modifications

The Sewing Machine Modifications are designed to make a sewing machine table wheelchair accessible. The modifications include a commercial sewing machine table that has been raised 10 inches to accommodate a wheelchair and an inverted foot pedal. PROTOTYPE DEVELOPMENT: Designed by Paul Cermak for a wheelchair user to enable the person to wheel right up under the table, and the foot control pedal was inverted to allow the individual a better reach from the wheelchair.

Sheffield Ada Picnic Table

The Sheffield ADA Picnic Table table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectangular table has two benches and space at one end to accommodate a wheelchair. The frame is made from an average of 66% recycled steel. The table top and seats are made from heavy gauge expanded metal with 30% recycled plastic content. OPTIONS: Surface mount table clamps (2 per table) to deter theft. DIMENSIONS (HxLxW): Table is 31 x 96 x 3

Sierra Electric Adjustable Workcenter

The Sierra Electric Adjustable Workcenter is a powered height adjustable computer work station designed for use by individuals who use wheelchairs, individuals of short stature, individuals who stand to work, and others who can benefit from a higher or lower work station. The surface height adjusts at 2 inches per second, with a lifting capacity of 250 pounds. The backlit liquid crystal display (LCD) control panel has tactile soft-touch control buttons and three programmable memory height preset

Single Adjustable Table (Model 7Whcs) & Double Adjustable Table (Model 7Whcd)

The Single Adjustable Table, model 7WHCS, is an accessible table designed for use by people who use wheelchairs. This height-adjustable table has an open base, a torso cut-out to enable the user to position himself/herself close to the work area, and a raised rim on three sides to prevent items from tolling off. The Double Adjustable Table, model 7WHCD, is also height adjustable and features dual torso cut-outs to enable two wheelchair users to face each other while using the table. Raised rims

Single-Surface Height-Adjustable Work Station

The Single-Surface Height-Adjustable Work Station is a height-adjustable work table designed to accomodate both manual and powered wheelchair users. The height is adjusted using a hand crank which retracts out of the way when not in use. A comfort recess enables the user to get close to the table to maximize usable surface area. Casters provide mobility. OPTIONS: Articulating keyboard arm. DIMENSIONS (HxLxW): The work surface is 48 x 30 inches. The height is adjustable from 24 to 34 inches. COLO

Sportsplay Picnic Work Table (Models 382-510 & 382-511)

The SportsPlay Picnic Work Table is an indoor/outdoor table designed to accommodates 6 seated plus 2 wheelchairs for children in a wheelchair. The height allows most youth wheelchair arms to fit under the table. The frame is made of 1 5/8" OD galvanized pipe. DIMENSIONS: 8 feet x 30 inches x 30 inches high; 6 foot benches. WEIGHT: 135 pounds (aluminum), 200 pounds (wood).

Sportsplay Wheelchair Picnic Work Table (Models 382-513 & 382-514)

The SportsPlay Wheelchair Picnic Work Table is designed with an open leg design to provide easy access for children who are in wheelchairs. It offers extra height neccessary to allow a child in a wheelchair a comfortable fit. Up to 8 wheelchairs can fit around the table. The top is available in untreated No. 1 yellow pine or anodized aluminum. The support frame is made of 1 5/8" OD galvanized pipe. OPTIONS: You may purchase separately the legs and hardware only. DIMENSIONS: 4 x 8 feet. WEIGHT: 1

Supersaver Ada Picnic Table (Models Bdt8Hdp & Bdt8Hdsm)

The SuperSaver ADA Picnic Table is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has centered seats on both sides and space for wheelchair access at each end. The tabletop and seats are made from steel with a thermal-fused plastic coating, and the frame is powder-coated galvanized steel. The table is available in a portable version (model BDT8HDP) or a surface- mounted version (model BDT8HDSM). DIMENSIONS

Swing-Away Table

The Swing-Away Table is an accessible table designed for use by individuals with mobility disabilities. This height-adjustable table has a tubular steel base that sides under a bed or chair for stability; a braclet to grasp a chair arm for additional security. The tabletop swings a full 360 degrees for proper positioning as needed or to move out of the way for transfers. DIMENSIONS: The height adjujsts from 21 to 33 inches and the top of the table is 18 inches in diameter.

Table Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table attachment to allow a child to sit with the rest of the family at meal times. Plywood board 12 by 24 inches with a semicircle cut to fit against the child. It is fastened to the table or desk with G clamps. Includes drawing and photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 56-57. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC

Table For Use In Bed

CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation for a table for use in bed to hold remote controls for an individual with quadriplegia. A small table with a small cushion at the based filled with polystyrene beads was made. The cushion is medium stuffed so that it is very stable and will stay in the position it is pushed into. A table top was made from a plywood base with a lip around all four sides to prevent items from falling off. A piece of non-slip mat was added to the table but

Table To Facilitate Donning Stubby Prostheses By Bilateral Above-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Using short stubby prostheses in elderly bilateral above-knee amputees has been advocated by several experts. A table was designed to facilitate donning stubby prostheses. Table is made of 3 sheets of 3/4" plywood 18 inches square. The table measures 18 inches in height, width, and depth. This height was selected to facilitate the table's use from the patient's wheelchair or bed. Across the top of the table is a horizontal platform with two cutout slot

Table-Mate Ii

The Table-Mate II is an accessible height-adjustable tilt top work table designed for use by individuals with mobility disabilities. This portable table adjusts in height and angle, adjusts for chair and body size, and folds for storage. This table holds up to 50 pounds and can serve as a student desk or workstation or be used for reading, hobbies, puzzles and games, and art activities. DIMENSIONS: The table top is 20.75 x 14.75 inches and the distance between the legs is 18.25 inches. The heigh

Therashape Group Table

The Therashape Group Table is a therapy table designed for use by individuals who use wheelchairs or in activities requiring close proximity to the table. The table is curved with cut out areas to accommodate three individuals. The table is height-adjustable using hand knobs and the steel powder-coated legs feature knob-style column locks and six adjustable base levelers. DIMENSIONS: The table adjusts in height from 23 to 33 inches. Each of the cut-out areas is 18 inches wide x 10 inches deep. T

Therashape Table

The Therashape Table is a therapy table designed to be used as a treatment, feeding, or activity table for any healthcare setting. This table accomodates four to five individuals. Three adjustable legs provide seating room and access, and offer height adjustments. The legs feature knob-style column locks, 5 adjustable base levelers, and a steel column. DIMENSIONS (LxW): The table top measures 72 x 28 inches. Table height can be adjusted from 23 to 33 inches. COLOR: Maple-finished high-pressure l

Tip 'n Grip Tray

The Tip 'N Grip Tray is a non-slip tray designed for use by individuals with balance, mobility, or upper extremity disabilities. The non-slip surface ensures that items placed on the tray will not slide under normal use. Available in rectangular or oval styles, the tray is dishwasher safe and the non-slip surface is designed not to wear off. DIMENSIONS: The rectangular tray is 18 3/4 x 14 7/8 inches and the oval tray is 22 3/4 x 14 3/4 inches. COLORS: Rectangular tray is cream color. Oval tray i

Trader Picnic Table - Wheelchair Accessible (Models Tada-1700 & Tada-1800)

The Trader Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectagular table has benches on two sides with space for a wheelchair at the end. The table has a recycled plastic top and benches with a heavy duty powder coated steel frame. The table is available with surface or inground mounting. DIMENSIONS (HxLxW): Table top is 33 x 72 x 30.37 inches (model TADA-1700) or 33 x 96 x 30.37 inches (m

Typing Table For Wheel Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides typewriter or other table at proper height for wheelchair user. One-legged plywood table measuring 15 inches by 22 inches by 1/2 inch is reinforced with 2 wooden braces. COMMENTS: Submitted by Physical Medicine Rehabilitation Service, Veterans Administration Hospital, Richmond, Virginia. SKILLS REQUIRED: Woodworking. AUTHOR: New York University Bellevue Medical Center Institute of Physical Medicine and Rehabilitation TITLE: Typing Table for Wh

U Base Overbed Table (Models 11620 & 11630)

The U Base Overbed Table, models 11620 and 11630, is an overbed table designed for use by individuals with mobility or severe physical disabilities. It has a four point, U-shaped base with four dual wheel nylon casters, two of which lock. The U-shaped base allows this table to fit in areas with restricted space. The table also has spring-loaded height adjustment. DIMENSIONS (LxW): 26.38 x 15.25 inches (base); 30 x 15 inches (tabletop). The height of the table adjusts from 26.75 to 43.25 inches.

Vari-X Computer Table (Models Vx60, Vx61, & Vx62)

The Vari-X Computer Table is an adjustable-height computer table designed for use by individuals who use wheelchairs, and those with severe physical disabilities and spinal cord injury. These computer tables can each be lowered to less than 10 inches off the floor for individuals who need to work lying down, raised to accommodate a wheelchair, and raised up to three feet five inches off the floor to allow users to work standing up or in a stander. The worktop passes easily through doorways on it

Vision

Vision is a height-adjustable table that has not cross braces underneath the surface. It is designed for individuals who use a wheelchair for mobility. The Vision is a mobile table that can be adjusted manually or electrically. The adjustable surface is available for dual or single users.

Vox Adjustable Workstation-Bi-Level Rectangle

The Vox™ Series by POPULAS is designed to accommodate various work heights for individuals of all sizes in a variety of work industries. It is designed to increase circulation, spine health, user productivity and interpersonal interactions. Vox™ workstations eliminate the cross brace, allowing ultimate knee space and complete freedom of movement. It is equipped with a push-button powered adjustment that has been designed to operate smoothly with minimal noise. It is built with extruded aluminum

Welded Frame Science Table, Round Legs (Model A3080-99)

The Welded Frame Science Table, Round Legs, model A3080-99, is a height adjustable work table and adapted student desk designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury and others who use wheelchairs. This table has a welded steel frame and a chemical-resistant EcoStone top that is made from 100% post consumer recycled materials. DIMENSIONS (HxWxD): 29 (minimum) x 60 x 24 inches. WARRANTY: Lifetime warranty.

Westin Picnic Table - One End Wheelchair Accessible (Model Sptha)

The Westin Picnic Table – One End Wheelchair Accessible, model SPTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long, rectangular table has benches on two sides, with space for a wheelchair on one end. It is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 96 x 29 inches. The seats are 20 x 72 x 9.5 inches. WEIGHT: 340 pounds. COLOR: Cedar table top and seats with green fr

Westin Two-End Wheelchair Accessible Picnic Table (Model Ptha)

The Westin Two-end Wheelchair Accessible Picnic Table, model PTHA, is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This rectancular picnic table accommodates two wheelchairs. It has a raised top and extended ends to allow wheelchair users to maneuver under the table. The table is made from recycled plastic with stainless steel hardware. DIMENSIONS (HxLxW): The table top is 31 x 97.5 x 29 inches. The seats are 20 x 72 x 9.5 inches. WE

Wheelchair Accessible Table (Model TF31281)

The Wheelchair Accessible Table, model TF31281, is a wheelchair picnic table designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The unit seats 7 people around a circular tabletop, with three benches and space for a wheelchair. The tabletop has a polished or ground concrete surface, and it accepts an optional umbrella. The unit is made of steel-reinforced concrete with metal legs. Assembly is required. OPTIONS: Umbrella; refinishing kit for concre

Wheelchair Accessible Tops And Seats

Standard picnic table with extra long top. Seats are 6 feet long, tops are 8 feet long. Galvanized steel frame. Constructed of Redwood, aluminum, or fir. Weight: 222 pounds, 62 pounds, 130 pounds, repectively.

Wheelchair Picnic Table (Model 1312)

The Wheelchair Picnic Table no. 1312 has a table top that extends 12 inches at one end to be accessible to wheelchair users. The table and seats are constructed of anodized aluminum. The curved leg supports are made of 1 5/8-inch O.D. galvanized pipe. GROUND SPACE: 5 by 8 feet. WEIGHT: 115 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair Picnic Table (Model 1337)

The Wheelchair Picnic Table no. 1337 has pressure-treated wood top and seats on curved leg supports made of 1 5/8-inch O.D. galvanized pipe. The table top extends 12 inches beyond the benches and has no obstructing posts or beams to provide wheelchair access. GROUND SPACE: 5 by 8 feet. WEIGHT: 206 pounds. WARRANTY: 1-year on materials and workmanship.

Wheelchair-Accessible Desk

The Wheelchair-Accessible Desk is a height-adjustable deskdesigned for classroom use by children who use wheelchairs. This desk features a heavy 16-gauge frame with an integral U-brace and an oversized solid-plastic top. It includes a dual-bolt leg attachment system for added security. DIMENSIONS: The desk height can be adjusted from 31 to 34 inches. The desktop is 20 x 36.5 inches. COLOR: The top is available in beige or grey.

Wheelchair-Accessible Mobile Workstation (Models W53191 & W53192)

The Wheelchair-Accessible Mobile Workstation is a height-adjustable work table designed for use by individuals who use wheelchairs in schools, training centers, and offices. The work surface is mar-resistant laminate with rounded corners edged with protective vinyl molding. Its open design allows access to and from work surface. The tabletop height is adjustable to accomodate a variety of users. The unit features four casters, two with locking brakes. DIMENSIONS: The height adjusts in one-inch i

Wooden Picnic Table - Wheelchair Accessible (Models Pup238H-Pt8 & Pup158H-Pt8)

The Wooden Picnic Table - Wheelchair Accessible is a wheelchair picnic table designed for use by individuals with mobility disabilities or spinal cord injury. This long table has seats on two sides made from Southern Yellow Pine planks, with space for a wheelchair at each end. Users can slide into the seats without stepping over the frame. The wood is ACQ-treated and the frame is either galvanized or powder-coated iron pipe. DIMENSIONS (HxLxW): The table top is 30.5 x 96 x 30 inches. The seats a

Working Table

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Table can be shaped like half a donut for persons with limited reach. Describes a work table made of wood or other sturdy material, 64 by 32 by 5/8 inches in size, cut in a half-circle with a semicircular indentation on the flat side to accommodate the person working. Suggests using the type of folding legs used on banquet tables. Table folds up for easy storage. SKILLS REQUIRED: Woodworking. AUTHOR: Mooney, J TITLE: Working Table JOURNAL: Accent on Li

Worktable With Support For Standing.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable work table provides extra support and balance needed to prevent employees from falling. Particularly useful for lower extremity amputees. Wooden table top consists of wide hinged armrests and a safety belt. Four adjustable 7/8 inch metal pipes run through standard work bench to serve as legs. Includes photograph and diagram. COMMENTS: Submitted by the Occupational Therapy Department, Institute of Physical Medicine and Rehabilitation, New Yor

Parent Category: Furniture

Sub-Categories

 
Processing...


Driving Walking/Biking Public Transit  Get Directions