Seating

Results: 1315

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)

The "T" Tube-Plate Assembly Weldment is headrest accessory interface hardware designed for positioning an Occipital Angle Bar or an Occipital "T" Bar on a wheelchair. The "T" Tube-Plate Weldment attaches to the rear of the occipital bar and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. DIMENSIONS: Available in 4- or 6-inch lengths. COLOR: Available in black and stainless steel.

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or

"z" Tray Slide Bracket Attaching System (Model 32799)

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets

1.5-Inch Slide Bracket & Abs Spacer Plate

The 1.5-inch Slide Bracket, model AB-1530, and the 1.5-inch ABS Spacer Plate, model AB-1815, are mounting hardware components designed for anchoring removable postural supports to solid seat and back panels. The Slide Bracket includes an F44-0476 Knob. The Spacer Plate is used to protect upholstery and ease insertion and removal of the bracket.

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)

The 10 Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 10-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

2 Wheelchairs Accessible 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It is a 4-seater picnic table. Has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

3-Inch 90 Degree Bracket & 6-Inch 90 Degree Bracket

The 3-inch 90-degree Bracket, model LB-3030, and the 6-inch 90-degree Bracket, model LB-6060, are stainless steel brackets designed for constructing one-piece seating systems, attaching seats and backs together, or mounting lateral hip guides. The brackets have slotted holes for assembly into T-nuts after upholstery.

34 Laminate

Two layered foam seat cushion constructed of Velfloat layer on a High Density foam base. Light to medium flotation. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

4 D Lapboard Adjustable Bracket Mount (08-3000 Series)

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00). Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch ABS plastic, 1/4 inch lexan, cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

4-Square Pillow

The 4-Square Pillow provides a soft, safe spot for reading, napping or daydreaming. Perfectly sized for all ages.

6-Seater Picnic Table- Fits 1 Wheelchair

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. Shipping cost included.

6-Seater Picnic Table- Fits 2 Wheelchairs

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

6610 Chest Support

The 6610 Chest Support is a torso support and harness restraint designed for firm trunk support. The support is made of foam with an inner moldable core that can be formed to follow body contours. The yokes have straps for attachment to high back standard wheelchairs, travel chairs, and strollers. Placement holes are pre-cut in yokes for adjustments in size. The support has quick release buckles, a lap belt with pivotal mounts, and a polypropylene strap with nylon quick release buckle that goes

6620 Modular Chest Support

The 6620 Modular Chest Support is an adjustable torso support that allows individualization to fit different body variations. The support has removable yokes that are interchangeable between sizes, an inner core that allows the support to be shaped to fit, and an outer foam covering. Straps can be mounted to the back of a chair and have quick release buckle fasteners. The lap belt has a pivotal mount so the pull at the hips comes at the desired angle. Component sections can be ordered separately

6625 Trunk Support Bar & 6626 Trunk Support System

The 6625 Trunk Support Bar and the 6626 Trunk Support System are torso support and pelvic stabilizers designed for use when an individual is seated in a wheelchair or custom seating system. TRUNK SUPPORT BAR: The bar is made of an inner core of molded nylon with a vinyl coated foam cover. It has a 2-inch polyporpylene strap with a quick release buckle on one side and molded slots on the top and bottom of the core to enable straps to be atached if extra positioning is desired. A crotch strap can

6628 Side Opening Head Support

The 6628 Side Opening Head Support is designed for use by individuals who are unable to independently maintain proper head positioning. Available in three sizes, this support cradles the entire head and may be used mounted or unmounted to a seating system or wheelchair. Made of closed cell vinyl-coated foam, the support features reinforced front and back plates, a hinge on one side, and a quick release buckle on the other side for ease in use. SIZES: Unmounted extra small, unmounted small, unmou

6630 C-Collar And 6635 Extended C-Collar

The 6630 C-Collar is a neck support contoured for the lateral and posterior neck areas to help prevent neck hyperextension. The 6635 Extended C-Collar is the same as the C-Collar with a clavical support added. Both collar can be used in conjunction with most seating units, and used during classroom activities and feeding. DIMENSIONS: C-Collar is 8 x 3.5 x 2 inches; the Extended C-Collar is 8 x 10 x 2 inches. COLOR: Black or Casa Tan.

6650 Half Mask

The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest. A replaceable terrycloth pad lines the foam mask, and an aluminum inner core allows the headpiece to be formed to fit the face. For mounting purposes, one side of of the mask can be attached directly to headrest; the opposite side fastens with snap buckles. OPTIONS: 6650 Mount P

6674 Lap Strap Cover

The 6674 Lap Strap Cover is foam strap padding that wraps around seat belt or lap belt webbing to prevent digging into sensitive skin or other pressure areas. This padding can also be used for backpacks, shoulder bags, etc. The cover is designed for use with 1.5- or 2-inch lap straps. DIMENSIONS: 14 inches (Small) or 18 inches (Large). COLOR: Black or casa tan.

6676 Contour Covers & 6678 Harness Covers

6676 Contour Covers and 6678 Harness Covers are padded covers for lap belts and shoulder straps. The covers are made of vinyl coated foam tubes that slide over belts and straps. The covers are flexible and washable. The 6678 model is designed for use with 1- or 2-inch straps. DIMENSIONS: Contour Covers are 12 x 2 inches, and Harness Covers are 8 x 1 inches (Small) or 12 x 2 inches (Large). COLOR: Black.

6800 Seating Accessory System

The 6800 Seating Accessory System is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support. The chest support's lap belt goes through existing strap holes and the bar fits around the seat and is secured with channel brackets (included). SIZES: Small, with lateral head support provided by foam pads, wedged and formed, to cradle the head; Medium and Large, both with full C Collar for side suppor

6809 High Back Hensinger Head Support

The 6809 High Back Hensinger Head Support is a head and neck support that consists of the 6810 Hensinger Head Support (see separate entry) with a 1.5 to 2 inch higher back for additional occipital support. The cushions are made of vinyl coated foam. The device comes unmounted or mounted. SIZES: Extra Small, Small, Medium, and Large. COLOR: Blue or black.

6810 Hensinger Head Support

The 6810 Hensinger Head Support is a wrap around collar designed to support the head by using base support areas at the occiput and jaw line. Manufacturer recommends this support be used in conjunction with chest support to help maintain mid-line head positioning. (Proper head positioning should result in improved breathing, swallowing, and simplified feeding; and may also be conducive to more social interaction and awareness during classroom activities.) The support fastens with a one-snap rele

6812 Modular Head Rest

The 6812 Modular Head Rest with Mount Plate is a head and neck support designed for use with the Hensinger Break-Away-Mount Plate (see separate entry). An adjustable vertical connector attaches the two devices together. Three vinyl coated foam discs cradle the head and may be adjusted for the use of head switches. COLOR: Black.

6814 Lateral Head Support With Mount Bar

The 6814 Lateral Head Support with Mount Bar is a headrest designed for use with feeder seats that can be positioned to support from the occipital area and higher. The support is made of foam padding that comes around the sides of the head to provide support. SIZES: Small, Medium, Large, and Extra Large. COLOR: Bright blue, black, orange, red or teal. These custom colors are available for an additional $26: Baby blue, forest green, silver/gray, maroon, pink, purple, royal blue, casa tan, white a

6815 Hensinger With Mount Bar

The 6815 Hensiger with Mount Bar consists of the 6810 Hensinger Head Support (see separate entry) mounted on an aluminum bar designed to be attached to TumbleForm feeder seats or Danmar Trunk Support (see separate entries). The device slides over the seat with back buckle fasteners. Channel brackets for securing the bar after the head support is positioned are included. SIZES: Small, Medium, Large or Extra Large. COLOR: Bright blue. These custom colors are available for an additional $26: light

6821 Size Reducer

The 6821 Size Reducer is a foam insert designed to accommodate persons between sizes of the Hensinger Head Support (see separate entry). The vinyl coated foam insert fits into the inner circumference and has velcro straps which wrap around the head support. There are two models: Narrow and Wide. The narrow model can be used over or under the covers. The wide model adds some additional occipital support as the top foam piece folds over the back of the Hensinger. SIZES: Narrow or Wide. DIMENSIONS

6830 Sweep Headrest

The 6830 Sweep Headrest is a wrap around headrest with an occipital convex foam cushion built in across the bottom of the center pad to cradle the head. The support has two small wings that form the sides, angled at 60 degrees off center back pad. The heavy duty back plate has pre-threaded 1/4-20 metal inserts for mounting and eight 1-inch bushings which can be used as spacers to adjust the distance of the headrest to the head. The product can be ordered with or without mounting hardware. An opt

6915 Anti Thrust Cushion

The 6915 Anti Thrust Cushion is a wedge foam seat cushion designed to aid individuals who are prone toward slipping down into their seat. The cushion can be used in classroom chairs, wheelchairs, kitchen chairs, etc. Two snaps are attached to the rear of the cushion for fastening to the seating unit. The wedge is vinyl covered and washable. SIZES: Small, Medium, and Large. DIMENSIONS: Available in 14, 16, or 18 inches square (respective to sizes); all sizes are 3.5 inches in front tapering to 1

6919 Positioning Pillow

The 6919 Positioning Pillow is a body positioner and infant positioning cushion made of a foam blend. Small squares of foam fill an inner pillow case made of vinyl, which is covered with an outer pillowcase that zips off for washing. SIZES: Small or Large. DIMENSIONS: 20 x 20 inches (small) and 32 x 20 inches (large). COLOR: Forest green.

6925 Portable Abductor

The 6925 Portable Abductor is an abduction pommel for use out of a seating system that attaches to each leg with adjustable, nonremoveable straps. The curved foam center cushions the calf, knee, or thigh area. DIMENSIONS: 4 x 3 x 4 inches (Small) and 5.5 x 4.5 x 6.5 inches (Large). COLOR: Bright blue, casa tan or yellow. SIZES: Small or Large.

7 Inch Slide Mounting Kit Models 3621 & 3621-01)

The 7-Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 7-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

7901 Hensinger Covers

The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large. COLOR: Black or blue.

7902 Hensinger Strap

The 7902 Hensinger Strap is a replacement straps with either a snap buckle or an adjustable slide buckle designed for the 6810 Hensinger Head Support and the 6809 High Back Hensinger Head Support (see separate entries). The straps are attached to the back plate. An optional velcro closure is available. SIZES: Extra small, small, medium or large. COLOR: Black.

7903 Hensinger Quick Release Mount Plate

The 7903 Hensinger Quick Release Mount Plate is a headrest accessory for the Hensinger Head Supports (see separate entries). The plate has 2 straps that attach the unit to the back of a seating unit. The Hensinger Head Support attaches to the plate with velcro. The velcro release will allow the head to move forward with the body. For permanent mounting, 2 screws are used to insure that the front and back plate stay connected. DIMENSIONS: 12 x 4 inches. COLOR: Black.

7906 Chest Support Straps

The 7906 Chest Support Straps are torso support accessories for the 6620 Modular Chest Support or the 6800 Seating Accessory Systems(see separate entries). SIZES: Infant, extra small, small, medium or large. COLORS: Black or rainbow. STRAP OPTION: Option C is standard. Option A, Option B and Yoke are available.

7907 Chest Support Hardware

The 7907 Chest Support Hardware is a torso support accessory for the 6610 Chest Support (see separate entry). STRAP OPTION: Bottom or yoke.

7908 Reinforced Yoke Area For 6610

The 7908 Reinforced Yoke Area for 6610 is a torso support accessory designed for use with the 6610 Chest Support (see separate entry) to reinforce areas receiving hard wear. The yoke is a clear PVC (plastic) extruded tubing that is placed around the inside edge of the full yoke area. COLOR: Clear

7910 Elongated Yoke Area For 6610 Or 6620

The 7910 Elongated Yoke Area for 6610 or 6620 is a torso support accessory designed to replace the straps of the Danmar Chest Supports (see separate entries). This flexible plastic strip helps to prevent the straps from getting caught in the spokes of wheelchair wheels. A buckle is attached to one end that snaps into the chest support and the other end is permanently mounted to the wheelchair base. COLOR: Black

7914 Half Mask Otto Bock Mount Plate

The 7914 Half Mask Otto Bock Mount Plate is a headrest accessory designed to mount the 6650 Half Mask (see separate entry) onto the Otto Bock headrest. The mask mounts with adhesive foam backing for breakaway release in the event of emergency impacts. COLOR: Black.

90-Degree Tube Plate Weldment (Models 1511, 1511-01, 1512, 1512-01, 1513, & 1513-01)

The 90-Degree Tube Plate Weldment is headrest accessory interface hardware designed for positioning the wheelchair headrest. The 90-Degree Tube Plate Weldment attaches to the recessed area of the Headrest and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. OPTIONS: A custom made 90-Degree Tube Plate Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLORS: Both the original and the custom made options are available in black and stainl

Abduction Contoured Pads (Models 1350, 1351-01, -21, -31,-32, -33, 1360, 1361-01, -21, -31, -32, -33, 1370, 1371-01, -21, -31, -32, & -33)

The Abduction Contoured Pad is an abductor designed to support the legs of an individual with spinal cord injury or severe physical or neurological disabilities in abduction while seated in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Abduction Contoured Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the interface hardware. These pads are padded and available covered with a variety of uphols

Abduction Wedge (Model 703075)

The Abduction Wedge, model 703075, is a abductor designed for use by individuals who use wheelchairs. This high-density foam wedge controls abduction contracture caused by sitting with the knees together for long periods. This wedge features Velcro straps for secure positioning and a removable, washable fabric cover.

Abduction Wedge / Knee Separator (Model 6307)

The Abduction Wedge / Knee Separator, model 6307, is an abductor designed to properly position the knees of individuals who use wheelchairs. The contoured sides of the machine-washable separator hug the thighs and maintain four to five inches of knee separation. Dual Velcro straps comfortably maintain positioning. DIMENSIONS (HxWxD): 7 x 4 x 5 inches.

Abduction Wedge Pad (Models 1443-01, -21, -31,-32, -33, 1444-01, -21, -31, -32, -33)

The Abduction Wedge Pad is an abductor designed to support the legs of an individual with spinal cord injury or neurological or severe physical disabilities in abduction while seated in a wheelchair. The Abducion Wedge Pad is constructed of plywood and foam with tee nuts, and is available d with a variety of covers. OPTIONS: Stationary or swingaway mounting. Covers are available in terry, Lycra, and heavy-weight nylon. SIZES: Available in small and large. DIMENSIONS: The small wedge is 4.5 inch

Abductor And Hardware

Custom size abductor wedge of laminated woodcore surrounded by 1 inch medium density foam and covered with vinyl upholstery. Pre-attached to mounting bracket unless otherwise specified. Mounted by sliding a slotted aluminum fork onto a knob through a threaded T-nut underneath the seat. Fork provides depth adjustment of 3 inches. Designed to fit over seat with 2 inch thickness, but can be ordered for thicker seating if necessary. Abductor flips down below the seat for transfers when aluminum rele

Abductor Flip Down Kit (Model 31467)

The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.

Abductor Pad And Bracket

Oval or wedge shaped abductor pad. Naugahyde covered. Foam padded. Attaches to seat with brackets which flip below seat for easy transfers. Lever or button release. Adjusts forward and back for precise positioning. Made to fit most solid seats. 3 to 4 inches high, 4 to 8 inches long, 3 to 4 inches wide. Retractable available. .

Abductor Pads (Models 31429, 31430, 31431, 31466S, 31466M, & 31466L)

The Abductor Pads are designed to aid in positioning people who use wheelchairs. Made of textured urethane self-skinning foam, these pads come with 10-32 T-nuts embedded in all mounting holes. Models 31429, 31430, and 31431 have one-inch on center mounting holes and the 31466 series have 1.5-inch on center mounting holes. SIZES: Both styles come in small, medium, and large. DIMENSIONS: All pads are three inches tall. The small models are 3 inches wide in the front and 3.5 inches wide in the back

Able Generation Basic Play Chair

The Able Generation Basic Play Chair is a youth positioning chair designed for use by children with physical disabilities. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt and pads. OPTIONS: An optional footrest and tray (sold separately) are available for the regular chair. A therapeutic back insert

Able Generation Booster Chair

The Able Generation Booster Chair is a booster seat with side support designed for use by children with physical disabilities. This seat can be placed on a variety of chairs and pulled close to the table, fostering family interaction and the development of feeding skills while providing proper positioning. OPTIONS: Footrest; flat, winged, or therapeutic back supports, seat and back pads, and a pomel. SIZES: Small and regular. DIMENSIONS (WxD): The small seat is 10 x 10 inches without pads or ins

Able Generation Module A Play Chair

The Able Generation Module A Play Chair is a youth positioning chair designed for use by children with physical disabilities who have adequate head control and early sitting skills. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt, pads, a flat insert back, and a pommel. OPTIONS: An optional footrest

Able Generation Module B Play Chair

The Able Generation Module B Play Chair is a youth positioning chair designed for use by children with physical disabilities who require additional trunk support. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt, a winged insert back, one- or two-inch side leg pads, and a pommel. The winged back inser

Able Generation Module C Play Chair

The Able Generation Module C Play Chair is a youth positioning chair designed for use by children with physical disabilities who require full back, head, and trunk support. This wooden chair features a moveable seat which can be angled and adjusted to any height within a specified range. The seat can be lowered so the child's legs rest on the floor, enabling supported floor play. The chair includes a nylon seat belt,height-adjustable legs, a therapeutic insert back, a choice of one- or two-inch

Able Generation Play Table

The Able Generation Play Table is a cut out table designed for use by children with physical disabilities. This wooden table enables the child to be surrounded on three sides, stabilizing the arms and aiding in focusing the attention. The table tilts to five, 15, or 25 degrees. A lip on the inside and outside edges minimizes the possibility of small items, books, and papers sliding off the table when the top is tilted. This table may also be used during floor sitting or supported standing. OPTIO

Ableware 704092010 Replacement Sling for Sit and Ride and Maddacrawler

The Replacement Sling for Sit and Ride and Maddacrawler is designed to assist adults and children that have fine motors disabilities.  It can be used as a stepping stone in therapy. Practice in the seated position of certain ambulatory patterns will prepare a person for actual use of the movements in a standing position. Sling is height adjustable from 9 – 17¨ (22.9 – 45.2 cm) and allows children and adults of all sizes to sit and propel themselves with their feet and to practice smooth reciproc

Ableware 704401000 Corner Seat/Positioning Aid

This product is designed to promote head and upper extremity control in order to encourage the development of fine motor control. The corner seat stabilizes the shoulders, pelvis and trunk and facilitates the arms and shoulders to come forward which increases arm movements and allows the child to work on activities in the midline. Features an H-strap for anterior trunk support, a hip belt to maintain proper position and an abductor block to help maintain leg extension and reduce extensor thrust.

Ableware 704430000 Maddacare Children's Seat

The Maddacare Children's Seat is intended for children with learning and cognitive disabilities as well as fine motors disabilities. It is portable it can be transformed into a booster seat. 

Ableware Children's Seat

The ABLEWARE Children's Seat is a youth positioning chair designed for use with children with balance, mobility, or neurological disabilities. This molded box-style seat is reversible for different seat heights and features slots to accommodate pelvic straps (not included) for use as a booster seat/highchair alternative. DIMENSIONS: The seat is 4.5 inches high on one side and 6.5 inches high on the other. WEIGHT: Less than 4.5 pounds.

Abs Plastic Tray (Models 1719, 2121, & 2124)

Molded ABS Lapboard with an edge rim. Three sizes: 17 1/2 by 19 1/2 inches; 21 1/2 by 21 inches; and 21 1/2 by 24 inches. Attaches to wheelchair armrest with bayonet style hardware, adjustable for different wheelchair widths. Accessories: clear (PET) shield that snaps onto the tray for use with symbol charts. The shield becomes scratched with use and must be replaced when it becomes difficult to see through.

Abs Plastic Trays

ABS Plastic Trays can be used on wheelchairs and prone standers. The front edge and sides have a rim to prevent objects from falling off the tray. Models are available with or without cutouts. Tray glides available. DIMENSIONS (WxD): 20 x 20 inches with a 5 inch cutout (Child); and 24 x 20 inches with a 6 inch cutout (Adult). COLOR: Beige.

Accu-Back Back Supports

The Accu-Back Back Supports are a portable back support cushions made of fire-retardant fabric and temper foam. Twelve models are available: an executive model has two vertical lumbar pads and shoulder rest, deluxe executive includes a seat pad in single unit, economy pillow back has back rest with single horizontal lumbar support, deluxe includes shoulder rest. Also 3 models with no additional parts needed. COLOR: Variety.

Acculift Back Support System

The AccuLift Back Support System is designed to provide lumbar support and to reduce the chance of lower back injury for persons working around the home, or on the job where any type of lifting is performed. As an injury prevention product, its technology was developed by orthopedic surgeons. The support system fits around the waist with cris-crossing straps in the back.

Achievement Alertseat - Medium

The AlertSeat is designed for use by individuals with attention deficient disorder or other disabilities. The AlertSeat offers an energy absorbing break from regular hard-surface classroom seating. The AlertSeat is designed to improve posture, moderate repetitive movement and help maintain muscle tone.

Achievement Alertseat - Small

The AlertSeat is designed for use by individuals with attention deficient disorder or other disabilities. The AlertSeat offers an energy absorbing break from regular hard-surface classroom seating. The AlertSeat is designed to improves posture, moderate repetitive movement and help maintain muscle tone.

Action Centurion Flotation Chair Pad (Models 5200 & 5205)

The Action Centurion Flotation Chair Pad models 5200 ($96.45) and 5205 ($108.85) are polymer flotation seat cushions fabricated of two layers of equal thickness: one made of foam and the other of AKTON, a viscoelastic polymer. These layers are enclosed in an elastic, waterproof cover. The pads come with a washable knit outer cover with a zipper closure and carrying loops. DIMENSIONS: Model 5200 is 16 x 16 x 1.25 inches; model 5205 is 16 x 18 inches. Custom sizes and shapes are available, however

Action Commuter Flotation Pad (Model 8500)

The Action Commuter Flotation Pad (model 8500) is a polymer seat cushion fabricated of a 1.75-inch layer of foam and 1/2-inch of AKTON, a viscoelastic polymer. DIMENSIONS: Standard size is 16 x 16 x 2.25 inches, but custom shapes and sizes are available. WEIGHT: 4.7 pounds. COLORS: Covers available in blue, brown, black, green, and burgundy.

Action Pilot Cushion (Model 9000)

The Action Pilot Cushion, model 9000, is a gel flotation seat cushion designed for people with lower extremity, mobility disabilities or spinal cord injury who are at risk for pressure sores and ulcers. The pads features a 1-inch thick layer of Akton polymer with a cover. It is recommended for use on manual and power wheelchairs, truck or taxi seats, or for other uses requiring significantly reduced high pressure areas, vibration and shear. OPTIONS: Incontinence cover. DIMENSIONS (LxW): 16 x 16,

Action Professional Flotation Chair Pad (Model 5100 & 5105)

The Action Professional Flotation Chair Pad, models 5100 and 5105, are polymer flotation seat cushions. The pads are made of AKTON, a viscoelastic polymer that acts like a fluid in gaining support, yet is a soft solid providing resilience. The pads have a waterproof elastic shell and an outer washable knit cover with a zipper and carrying loops. DIMENSIONS: Standard size is 16 x 16 x 1 5/8 for model 5100 and 16 x 18 x 1 5/8 inches for model 5105, but custom shapes and sizes are available. WEIGHT

Activity Lap Tray (Model 17698)

The Activity Lap Tray, model 17698, is a lapboard or lap tray designed for use by children ages 3 years and above and adults with mobility disabilities. Made of polypropylene plastic, this tray fits over the lap when the user is seated. The Activity Lap Tray consists of a firm flat tray between two side pockets that extent below the tray and act as the supports when the device in placed on the lap. On the tray, the user can write, play games, create crafts and perform other activities. The side

Acuback Heat Roller For Back Pain Relief

The Acuback heat roller is designed to relieve tension with therapeutic warmth. IT is microwavable and offers back and neck support. Nubby or textured supports create acupuncture-like therapy to release tight muscles and the design recreates the natural curve of the lumbar spine. Realigns the upper back and neck. Place it under neck, lower back, legs, or hands. Warm in microwave for one minute for 75 minutes of deep, soothing heat. Carrying case included.

Adalap

The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,

Adapt-A-Tray

The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b

Adapted Classroom Chair

CUSTOM ADAPTATION PURPOSE: To provide safe classroom seating with sufficient postural support for a young adult with Down syndrome. An existing Namco Seat Rite School chair was adapted by adding 20 millimeter steel tubing shaped as an inverted U to the top of the backrest to increase the back height. The chair was stabilized to prevent tipping backward by adding a second set of rear legs at the same angle as the existing legs and bracing them by connecting the pairs with metal strips. Also adde

Adapted Office Chair-Split Seat Chair

Opera 60 Split-Seat chair is a customized office chair designed to accommodate the body shape to support a healthy posture while maximizing comfort for to reduce back pack and repetitive strain injuries. The backrest of the Opera Back is tailored to specific statures, giving correct pelvic and lumbar support. The arms are height adjustable with multi-positional arm pads. The arm pads can be easily removed or reversed where extra short arm pads are required. The seat is designed to hold the pe

Adaptive Anti-Tipping Chair

The Adaptive Anti-Tipping Chair is a positioning chair designed for use by children or adolescents up to 48 inches tall with neurological or physical disabilities. The chair adjusts for leg length, seat depth, and back height. It is constructed of chrome plated steel and upholstered foam, mounted on stabilizing skis to prevent tipping. A seat belt is also included. OPTIONS: Clear acrylic tray, lateral supports, pelvic supports, removable knee abductor, and foot bracket. SIZES: Child or adolescen

Adaptor Air Spring Padding

Adjustable pre-inflated air cushioning interface for use on any surface to enhance soft tissue protection and provide shock absorption. Self contained sealed air cells may be cut apart in sections to fit flat or contoured surfaces where shock, impact absorption, shear or friction protection is required. Flame resistant. Neoprene rubber. Washable with soap and water. 10 by 14 inch sections with grid of 70 one inch square cells. .

Add-On Tray, The

DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Adductor Pad Kit - As4000 & As5000 (Models 4380-31, -32, -33, 4382-31, -32, & -33)

The Adductor Pad Kit is an adductor designed to position the legs of an individual with spinal cord injury or severe physical disabilities seated in a wheelchair. The pads are designed with internal threads for mounting to support brackets which attach to seat bottom. They are adjustable from front to back, in and out, and up and down. The pad is constructed of steel padded with 1.25 inch closed cell foam and covered with a Rubatex slip cover. A kit contains a pad and all the hardware necessary

Adjustable Angle Benches

The Adjustable Angle Benches are designed for use by children with balance or lower extremity disabilities. These wooden benches are padded and covered with slip-resistant Naugahyde. The seat angle adjusts 10 to 30 degrees in 5-degree increments. The benches also convert to horizontal benches. SIZES: Early Intervention/Preschool and Primary/Intermediate. DIMENSIONS(WxLxH): The Early Intervention/Preschool model is 12 x 24 x 6.5 to 10.5 inches and the Primary/Intermediate model is 12 x 29 x 11 to

Adjustable Back

The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting

Adjustable Bracket -- Single, Three, Five, Seven & Nine Holes.

The Adjustable Brackets are wheelchair seating hardware used in many areas such as wheelchair seat construction and wheelchair seat positioning with seat hooks. Made of stainless steel, both ends are rounded. One end is punched with two 17/64 inch x 5/8 inch slots and the other with a selected number of ##10 through holes. They are deburred for a smooth finish. Brackets are available with one, three, five, seven, or nine holes. COLOR: Available in black and stainless steel.

Adjustable Brackets (Models As4000 &as5000)

Adjustable Brackets are multi-hole brackets used in conjunction with seat hooks to enable a variety of seat positioning in wheelchairs. They are made of 11 gauge stainless steel with a 35 degree angle and available with 2, 3 4, 6, or 8 holes. Also available is an 8 hole, 2 inch extra long model. COLOR: Black.

Adjustable Chair And Table

CUSTOM ADAPTATION PURPOSE: To enable a small child with neurological disabilities to have a stable play area. Made of white pine plywood and coated in clear polyurethane, the table is height adjustable and has a torso cutout, enabling the child to move closer to the table and support himself/herself with his/her elbows while performing tasks with the hands. The chair is also made of white pine plywood coated with clear polyurethane and features a backrest, seat to floor height adjustability, an

Adjustable Channel Bracket Mount For Lapboard (Model 08-2000)

Lapboard with adjustable channel, mounts to arm of wheelchair with bracket. 1/4 inch clear acrylic. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Adjustable Footrest

Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.

Adjustable Head Support

The Adjustable Head Support is a padded head positioner with support legs designed to enable the head to be supported in prone, supine, or seated positions. The angle of support can be adjusted by altering the support legs. It may be useful for diagnostic testing, therapeutic massage, and cranial compression. OPTIONS: Extension legs are available. DIMENSIONS: Extension legs are five inches long.

Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)

The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm

Adjustable Howdahug Chairs

The Adjustable Howdahug Chairs are sensory stimulating chairs for children with sensory integration disorders, autism, ADD, ADHD and Down Syndrome. Provides deep sensory input contributing to the ability to stay focused for longer periods of time. Cushioned bottom hinge provides wear and tear protection and softer rocking and sitting in the classroom. Adjustable straps can be tightened or loosened. Water and stain resistant, flexible wooden slats, canvas.

Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)

The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam

Adjustable Kinder Chairs

The Adjustable Kinder Chairs are high and low positioning chairs designed for use by children ages one to seven years or up to 49 inches tall with mobility or physical disabilities. Features include a firm back and seat with adjustable seat depth and back angle. Other features includes a removable abductor pad, an adjustable footrest, and an abductor activity tray. The seat height adjusts to allow the child to work or play at a regular table. OPTIONS: Casters are available. DIMENSIONS (HxW): The

Adjustable Knee Spreader

The Adjustable Knee Spreader is a separator designed to maintain the knees in slight abduction while sitting. The device is made of chrome plated steel and aluminum, and lined with plastazote for pressure distribution. Thigh circumference is adjustable. DIMENSIONS: Width is adjustable from 3 to 6 inches.

Adjustable Leg Abductor (Models K6S & K7S)

Adjustable leg abductor for use on a flat surface. Six leg straps, adjustable hip straps standard. Fabricated of birch plywood and hard maple. Stain and mildew resistant pads with vinyl covers in blue or brown. Pads snap off for easy cleaning. K6S, 15 inches long. K7S, 24 inches long. Warranty available.

Adjustable Positioning Chair - Early Intervention (Model Apc100)

The Adjustable Positioning Chair – Early Intervention, model APC100, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle be

Adjustable Positioning Chair - Preschool / Primary (Model Apc200)

The Adjustable Positioning Chair – Preschool/Primary, model APC200, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle bet

Adjustable Positioning Chair - Primary / Intermediate (Model Apc300)

The Adjustable Positioning Chair – Primary/Intermediate, model APC300, is a customized positioning seat for designed for use by children with mild, moderate, or severe physical disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. The seat is height adjustable within the chair to allow the upper extremities to be positioned comfortably at the cutout on the side frame. The seat is also angle adjustable to create a seat to back angle

Adjustable Side Support Lumbar Cushion

The adjustable side support lumbar cushion designed to improve posture and reduce stress on the lower back. This cushion is firm and supportive, this cushion and positions users body in an ergonomic position. Has supportive side arms to keep users body stable and upright. Helps prevent users from slouching. Features an adjustable band and arms so the user can customize the comfort level. Can be used in an office chair, reading chair or car seat

Adjustable Split Solid Seat Insert (Model Ssp80Xx)

The Adjustable Split Solid Seat Insert, model SSP80XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an adjustable split seat, model MOD4900. DIMENSIONS: The foam is 1.5 inches thick.

Adjustable Straddle Bench

The Adjustable Straddle Bench is a forward tilt seat designed for use by children with balance, neurological, or lower extremity disabilities. This bench allow one end to be raised for anterior pelvic tilt and it can be converted to a standard bench. Controlled rocking facilitates balance and righting reactions and encourages appropriate weight shifting. SIZES: Early Intervention/Preschool, Preschool/Primary, and Primary/Intermediate. DIMENSIONS(WxLxH): The Early Intervention/Preschool model is

Adjustable Tilt In Space Chair (Models Ts13-Lb, Ts13-Hb, Ts15-Lb, Ts15-Hb, Ts17-Lb & Ts17-Hb)

The Adjustable Tilt in Space Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. The chair adjusts to meet the specific needs of each individual as he/she grows, changes, and develops. It features locking casters; adjustable-height footrests; seat cushion with slight anti-thrust wedge; back pad; adjustable hip and trunk guides; and a seat belt. The chair can be adjusted from fully upright to approximately a 40-degree tilt. The footrest, sea

Adjustable Trunk Supports

The Adjustable Trunk Supports are lateral supports designed to assist in positioning the body of wheelchair users. The supports mount to the side frame of wheelchairs.

Adjustable Wedge (Model 1775)

The Adjustable Wedge, model 1775, is a therapeutic wedge that affords orthopedically and neurologically involved children the freedom of arm and leg movement while in the prone position. The front and rear legs of the wedge can be adjusted to the proper height of the child with single button locks. The features include side rails for carrying and securing the positioning straps, a Naugahyde covered foam padded top for firm, yet comfortable support. In addition, the wedge is equipped with a remov

Adjustable-Drop Hardware Kits (Models 32517 & 32518)

Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.

Adl Lap Tray (Model Nc94114)

The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.

Adult Wheelchair Tray (Model 766)

The Adult Wheelchair Tray, model 766, is an adjustable lapboard designed to fit all size wheelchairs. The top is mar-resistant wood grain laminate and has rims on three side. DIMENSIONS: 23 1/2 inches wide x 21 1/2 deep x 1/2 inch thick, cut out size 14 1/2 x 8 3/4 inches, rims 1/2 inch high.

Ael Hardware Line

Complete line of hardware for attaching seating components to wheelchairs. Includes seat and back hooks, trunk support brackets, abductor brackets, rail clamps, head and footrest brackets, power wheelchair control box brackets, and fastening hardware.

Aeroflow Ii Wheelchair Pad (Model Msc061005)

The Aeroflow II Wheelchair Pad, model MSC061005, is an air flotation wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. The pad is made of durable 16-gauge antimicrobial vinyl and is latex-free. DIMENSIONS (LxW): 16 x 18 inches.

Airkair Seat Cushion

The AirKair Seat Cushion is an air flotation seat cushion designed for use by individuals at risk of developing or who have pressure ulcers. This cushion conforms to the individual's shape for comfort and reduced pressure. It has a low profile design which fits most chair and wheelchair seats. The inflation is adjustable. n. DIMENSIONS (HxLxW): The cushion is 2 x 16 x 16 inches. CAPACITY: 250 pounds. WEIGHT: Less than 2 pounds.

Airpulse Pk

The Airpulse PK is an alternating pressure air flotation wheelchair cushion system designed for use by individuals who currently have or who are at high risk for pressure sores. Alternate air cells are automatically inflated/deflated to the desired firmness on an adjustable timed cycle. This action is designed to change pressure contact points and stimulate circulation to the compressed tissue. The cushion system includes cushion, cushion cover, controller, controller cover and battery charger.

Akros Gel-Cell Cushions (Models Nc28395 & Nc28396)

Akros Gel-Cell Cushions are gel and foam seat cushions designed to be used in wheelchairs to prevent pressure sores and provide extra comfort for the user. The patented gel cell and foam construction provides a stable surface and helps prevent bottoming out. The cushion features a waterproof Staph-Chek inner cover and a washable cotton/polyester outer cover. DIMENSIONS (WxDxH): Model NC28395 is 16 x 18 x 2 inches and model NC28396 is 16 x 18 x 3 inches. WEIGHT: The cushions weigh between 6 and 7

Alarm Cushion (Models 754410, 754420, & 754430)

The Alarm Cushion is a foam or gel and foam seat cushion designed for use with geri chairs. This cushion features a built-in weight sensor factory sealed inside a vinyl compartment in the cushion to protect it from urine and wear and to prevent it from shifting beneath the user's weight. When the user's weight is removed as they attempt to leave the chair or as a result of sliding, an alarm sounds.

Alicover

AliCover is a foam material designed for use as a covering for orthoses. The cover is made of AliPlast 4E (see separate entry), a closed-cell polyethylene foam. The AliPlast 4E is laminated to a durable blue knit nylon, and the cover is applied with 3M Spray 90 or another adhesive spray to attach to the splint or support. AliCover is also available with an adhesive backing. DIMENSIONS: AliCover measures 1/16 x 29 x 8 feet ($33, no. 4437) or 1/16 x 29 x 50 feet ($120, no. 4438). AliCover Self-Sti

Alimed Aerocell Ii Pressure Relieving Wheelchair Cushions

The Alimed Aerocell II is a wheelchair cushion cover designed for individuals at risk of developing pressure sores. The cushion distributes pressure for even positioning for a more relaxed and comfortable sitting experience. The device is made out of black stretch nylon and its cover is washable. DIMENSIONS: Standard size is 18 inches length x 20 inches width x 4 inches depth. CAPACITY: 440 pound capacity. WEIGHT: 3.5 pounds. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.

Alimed Inflatable Lap Buddy (Model 77338)

The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator

Alimed Latex Wheelchair Cushions

AliMed Latex Wheelchair Cushions (models ##140, ##141, and ##142) are firm, resilient, high-density seat cushions with polyester knit covers. The cushions are made of pincore (open weave) construction for coolness, comfort, and aeration, and double knit for stretch and elasticity. The covers are zippered for easy removal. DIMENSIONS: 2, 3, or 4-inch thicknesses x 16 x 18 inches. All thicknesses available in Pediatric dimensions (16 x 16 inches) for the same price. COLOR: Covers are Navy Blue.

Alimed Seat Belt Alarm (Model 77667)

The AliMed Seat Belt Alarm, model 77667, is a seat belt and wandering patient system designed for use by individuals with Alzheimer's disease or cognitive disabilities and mobility disabilities. This dual-function seat belt keeps the patient in the chair and sounds an alarm if disconnected. The system also includes a flashing light to help caregivers to locate the correct individual if the alarm sounds. The belt can be adjusted to patient size. The system includes a metal mounting clip and gromm

Alimed Sit-Straight Basic Cushion

The Sit-Straight Basic Cushion is a high density foam seat cushion with a convex base designed for use in wheelchairs with sling seats. Intended to improve sitting posture and weight distribution, this cushion is a combination of the Solid Seat Insert (see separate entry) and a wedge cushion. The wedge is intended to encourage modified anterior pelvic tilt. A No-Slip waterproof cover with front zipper is standard with the cushion, and protects against liquid infiltration. Attached straps secure

Alimed Solid Seat Insert

The AliMed Solid Seat Insert is a semi-rigid, closed-cell foam seat cushion designed to correct wheelchair sling-seat sag by increasing seat flatness. This foam block has a convex bottom and a flat top. The convex portion fills the concave depression formed by the sling wheelchair seat. The flat, level surface created balances the pelvis, distributes weight evenly on both ischial tuberosities, and discourages side-to-side tilt. This seat insert is waterproof and smooth surfaced; there are no cra

Alimed Super Constructa Foam

Alimed Super Constructa Foam is tough, lightweight, flexible but firm mini-cell polyethylene foam material designed for customized positioning, seating, and support systems. This waterproof foam can be used without covering or finishing, or vinyl-dipped if a tough skin is desired. The material withstands repeated compression and abuse and returns to its original shape. It can bear heavy weights for extended time periods. The foam is sold by the slab. DIMENSIONS: 1 x 24 x 48 inches (##4925), 2 x

Aliplast

AliPlast is a cross-linked, closed-cell, heat modable, polyethylene foam material used for a variety of orthotic applications. There are five types of AliPlast that vary in firmness and stiffness. ALIPLAST 4E: For padding and cushioning splints and casts. Tensile strength of 80 to 110; density of 4 pounds per cubic foot; compressive strength at 50 percent compression is 35 to 45. ALIPLAST 6A: Effective for foot orthotics and many types of hand splints. Tensile strength of 110 to 140; density of

Aliplast 2E Quickstick Padding

AliPlast 2E (Quickstick Padding) is adhesive-backed foam padding designed for use with splints for people with carpal tunnel syndrome or other upper or lower extremity disabilities. This soft, flexible, and waterproof padding is used with splints and strap padding or tool and utensil buildups. It consists of thermoplastic closed-cell foam that is resistant to perspiration, bacteria or odors. The padding can also be used for cushioning hard edges on beds and wheelchairs. For extra strong bondi

All Star Cushion (Models Sc3030 & Sc3031)

The All Star Cushion, models SC3030 and SC3031, is a foam seat cushion designed for use by active wheelchair users who require mild to moderate lateral stability and mild to moderate pelvic and leg support. The cushion is made with layers of high resiliency polyurethane and visco foam. An internal anti-thrust shelf and lateral wedges create pelvic stability which discourages sacral sitting and relieves pressure from the ischial areas. The cushion comes standard with exterior and interior incont

Alleviate Support System (Model 99444)

The Alleviate Support System, model 99444, is an arm and back support designed for use by dentists and dental assistants to prevent upper extremity injuries. The purpose is to relieve and reduce the occurrence of musculoskeletal pain and localized fatigue caused by excess weight placed on the shoulders when one or both arms are elevated away from the body during dental procedures. The unit includes a pair of gel elbow rests to provide comfort and support while absorbing vibration from instrument

Allyn Air Seat

The Allyn Air Seat is an air flotation seat and back cushion unit for use in cars, trucks, or as wheelchair cushions. The cushion is designed to provide full support including to the lumbar area. Seat and back air pressure adjustable separately. The cushion is portable and washable. The material is 33 gauge vinyl; attachment straps are included. GUARANTEE: One year.

Aluminum Series Back Support

The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal

Aluminum Shells

Aluminum Shells are designed for mounting on cushions in seating systems. Sizes range from 12 to 18 inches in width, 10 to 22 inches in length. Each shell has pre-punched holes for attaching interfacing hardware and accessories. They will fit Contour-U, Sunmate, Jay, T-foam, Roho, or custom cushions. The shells will support body weight up to 250 pounds.

Ankle/foot Straps

Pair of velcro straps with mounting hardware and D-ring closures. Can be mounted to padded footboards or existing wheelchair footrests, positioned to strap ankle or forefoot.

Anna-Dote

Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha

Anti Decubitus Mattress Pad With Anchoring Hitch.

The Anti Decubitus Mattress Pad with Anchoring Hitch is a polymer floation mattress surface. The pad has an attachment system that allows it to be secured in its position on the bed. The hitch attaches to the bedframe at the head with Velcro straps, and stays attached to bed. The pad also has a Velcro backing that attaches to the hitch that can be removed for cleaning, etc. The mattress pad is filled with AKTON, a dry viscoelastic polymer, to help reduce the incidence of pressure sores.

Anti-Decubitus Gel Sit-Straight Cushion

The Anti-decubitus Gel Sit-Straight Cushion is a foam seat cushion designed to fight excessive pressure and pressure sores by encouraging better posture and more uniform weight distribution. The cushion is made of fire-retardant T-Foam (see separate entry), a pressure relieving, flotation-like foam material that molds and effectively increases the weight bearing area to reduce pressure, and high density foam wedge tapered on the distal edge to relieve pressure on the thighs. A No-slip incontinen

Anti-Thrust Solid Seat Insert (Model Ssp40Xx)

The Anti-Thrust Solid Seat Insert, model SSP40XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an anti-thrust seat, model MOD4400. DIMENSIONS: The foam is 1.5-inches thick.

Aquacare Cushion (Models 7636, 7637, & 7638)

The Aquacare Cushion, models 7636, 7637, 7638, is a water flotation seat cushion designed for total weight distribution. The inner flotation core is made of heavy duty vinyl. OPTIONS: sheepskin cover (7636); waterproof and fire retardent cover (7637); blue dacron/cotton cover (7639). DIMENSIONS: 16 x 18 x 2 inches.

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.

Arm Tray With Arm Tray Pillow (Model A74610)

The Arm Tray with Arm Tray Pillow is an arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. This tray features a comfortable, polyester fiber filled pillow containing extra filling underneath the hand for elevation to help reduce edema. The forarm portion of the pillow cups the arm, padding the sides and base of the tray. It includes all straps to securely position the pillow in the tray and the arm on the pillow. The pillow is machin

Arm Tray With Straps (Model A7461)

The Arm Tray with Straps, model A7461, is a plastic arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. The tray is equipped with three Velcro straps to secure the device to the wheelchair and Kushionflex pad to buffer any potential area of irritation. The tray can be secured on chairs with standard arms using three straps and on chairs with desk-length arms secured by only two straps. DIMENSIONS: The straps are one inch wide and the

Arm Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides support, elevation, or both for the forearm and hand of an individual setting in a wheelchair. Directions and materials given for 2 sizes of arm tray. diagram. similar to commercially available product. Attaches to wheelchair armrest. SKILLS REQUIRED: Woodworking, plastics. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 47- 48. 1976.

Arm Trough (Model 07-D)

Arm trough has molded plastic shell with energy absorbing foam pad covered with molded naugahyde skin. Provides full support from elbow to hand. Overall length is 18 1/2 inches; bed length is 15 1/2 inches, depth, 1 1/4 inches; elbow stop is 3 1/2 inches long and 2 1/2 inches high; inside width is 4 inches, flares at front to 6 1/2 inches.

Arm Trough (Model 09-2000)

The Arm Trough, model 09-2000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. For use with on the left and right arm, the Arm Trough is made of .25-inch Kydex with 1-inch nylon webbing straps with faux sheepskin covers. Hook and loop straps or buckle closure are standard. SIZES: Small/pediatric, medium/adolescent and large/adult. DIMENSIONS (LxW): 12 x 4.5 (small); 17 x 5 (medium)

Arm Trough (Model 09-4000)

The Arm Trough, model 09-4000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. The trough is designed with a curved shape to help protect and keep the forearm in place and features a soft durable Lycra neoprene liner to help reduce skin irritation. Other features include an elbow block to keep the arm stationary in a tilted or reclined position, and a padded wrist strap with Velcro

Armrest Cushions (Models 436A4 & 436A5 Series) & Channel Armrest (Models 436A2 & 436A3)

The Armrest Cushions, models 436A4 and 436A4 series ($63 to $21), and the Channel Armrest, models 436A2 and 436A3 ($35 to $32), consist of steel reinforced armrests, injection molded with self skinning foam. Straight armrests, and desk or full length sizes are molded to cradle the arm for support. The Channel interchangeable armrest is molded to cradle the elbow and arm with several different hand pads available. The Cushions can be mounted directly to standard wheelchair arms or used with the 4

Armrest Fixed Bracket (Model 31897)

The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o

Armrest Flip-Away Bracket (Model 31901)

The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d

Armrest Inhibition Cradle

The Armrest Inhibition Cradle is an ABS plastic contoured arm trough with velcro-in vinyl pad. The trough has forearm and upper arm sections. The adjustable mounting hardware clamps to standard 7/8 inch tubing armrests.

At Ease Adjustable Foot Support (Model Fs18Aj)

At Ease Adjustable Foot Support, model FS18AJ, is a foot support designed to promote proper posture, reduce fatigue and back strain and relieve stress on the legs, back and neck. The tilting support platform allows the user to vary the leg position and aids in circulation in the legs and feet. This foot support adjusts in height and angle and is ideal for workstations with multiple users. The platform is made of molded and texturized plastic and the frame is made of durable chrome tube. The supp

At Ease Contour Lumbar Support (Models L250 & L500)

The At Ease Contour Lumbar Support, models L250 and L500, is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. An orthopedic design relieves tension and supports the spine. It is made of molded high resilient urethane foam and the removeable cover is made of washable polyester. The strap in the b

At Ease Half Roll Lumbar Support & Full Roll Lumbar Support (Model L50 & L100)

The At Ease Half Roll Lumbar Support and Full Roll Lumbar Support, models L50 and L100 is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. The polyurethane foam is comfortable and has excellent recovery. The durable polyester cover is removable and washable. The elastic strap is designed to fit

At Ease Standard Foot Support And High Foot Support (Models F300 & F600)

The At Ease Standard Foot Support and High Foot Support, models F300 and F600, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. Both models have a durable wooden platform laminated with a non-skid vinyl surface; a lightweight chrome frame; and rubber feet to hold it in place. DIMENSIONS: Models F30

Attaching Hardware Kit (Model 31096H)

The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).

Attaching Hardware Kit (Model 33066)

The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.

Australian Hi Temp Ur Medical Sheepskin

Australian Hi Temp UR Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. These select Merino sheepskins reduce pressure, skin moisture and friction. These machine-washable natural shape sheepskins have been tanned for increased urine resistance. DIMENSIONS (LxW): 40 to 42 inches x 30 to 32 inches. The pile is 30 millimeterm or 1.25 inches. COLOR: Emerald Green.

Australian Medical Sheepskin

The Australian Medical Sheepskin is a decubitus pad designed for use by individuals at risk for pressure sores. The double-chrome tanned, high pile density Merino sheepskin is machine washable (up to 30 degrees Celcius). The soft, springy wool fibers of an Australian Medical Sheepkin absorb pressure from immobile limbs and joints, allow free air circulation, absorb moisture up to 34 percent of their dry weight without feeling wet, and wick the moisture away from the skin. DIMENSIONS (LxW): 42 to

Auto Style Hip Belt (Model Ee 3D/103-6000)

Wheelchair seat belt, nylon webbing and auto style push button buckle. Has a pair of iliac crest relief pads so the the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.

Axion Rotary Interface For Wheelchair Headrests

The Axion Rotary Interface™ for Wheelchair Headrests is a headrest accessory designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This device permits wheelchair headrests to rotate, and it attaches to most existing wheelchair headrests and hardware. This unit is quiet, free-running, and it does not require lubrication. The range of rotation can be limited or stopped.

Baby Lambskin Rug + Woolskin

The Baby Lambskin Rug + Woolskin is a bed and decubitus pad pad designed for use with infants and children with severe physical or neurological disabilities or spinal cord injury. These lambskins can be used in cribs, beds, strollers, and car seats. DIMENSIONS: 26 x 36 inches. The pile is 24 millimeters. COLOR: Champagne.

Back Bar Mount, Nonpivoting Trunk Supports (Model 105-2000)

Lateral trunk support for adaptive positioning. 1/4 inch ABS plastic base with separate removable or replaceable cushion. Can be used with a sling or solid back. Pads are straight, not contoured and can adjust vertically, horizontally and front to rear. Universal pad mount allows pad to be oriented to body. Mounts on back frame. Nonpivoting. Sizes: 4 inches long by 3 inches high, 5 inches long by 4 inches high, 6 inches long by 5 inches high, 7 inches long by 6 inches high. Custom sizes availabl

Back Cushion (Model 76)

The Back Cushion, model 76, is a foam back cushion designed for wheelchair use. The cushion is fabricated of foam covered with fabric. DIMENSIONS: 1 inch thick.

Back Jack (Models Bj-M & Bj-Xl)

The Back Jack is a back support cushion designed to provide support when sitting on the floor. All models feature a slightly reclined back and a wedge seat. They have a steel frame with a foam seat pad and a canvas cover. SIZES: Medium (BJ-M) or extra-large (BJ-XL). DIMENSIONS (HxDxW): 20 x 11 x 14 (medium) or 21.5 x 12.5 x 16 x 12.5 (extra large).

Back Rest, Sport Seat, & Seat Rest Self-Inflating Cushions

Open cell foam back rest with airtight, waterproof nylon shell. Self inflates; valve to adjust user's comfort. Size 16 by 8 by 2.5 inches; blue, cedar brown covers available. Also available: Seat Rest, similar product for seat of chair, size 12 by 16 by 1.5 inches; price $65.00; Sport Seat, like Seat Rest except heavier duty covering, in navy, rust, or green.

Back Support (Model Ha-4785)

Back Support, model HA-4785, is a foam back support cushion designed for use by individuals who need extra back support. Formed from deeply contoured foam, this support cushion adds extra comfort. It has a washable cover and elastic straps to fit and secure it to most chairs. DIMENSIONS (HxLxW): 120 x 400 x 330 millimeters. WEIGHT: 800 grams.

Back Vitalizer

The Back Vitalizer is an inflatable back support cushion designed for use by individuals with lower back pain or individuals who sit for long periods. This back support device produces a gentle and on-going stimulating motion. By controlling the level of inflation, the user can control the level of exercise or support. Its aero-dynamic structure is adjustable to suit individual needs. The device helps to relieve and prevent stiffness, fatigue and pain in the lower back, shoulder and neck. It als

Back-Huggar

The Back-Huggar is a back support pillow designed for use by individuals with back pain or injury. It is constructed of polyurethane foam with a cloth, hand-sewn cover with a zipper. The Back-Huggar is available in four styles: Standard fits most straight back chairs and auto bench seats; Bucket Seat for designed for auto bucket seats and cureved back chairs; Secretary for open back chairs; and Extra Wide for wider backs. Elastic straps for attaching support to seats and chairs are available; t

Back2Go Back Support

Back2Go Back Support is designed for children to strengthen posture and trunk on a chair, wheelchair, or stroller. It features a two-strap system with buckle closure to secure back support to an existing back surface. Straps can be stored in back pocket when not in use. The height and width can be adjusted. It has removable lateral supports for additional support. There is a zippered vinyl trunk harness in an “H” configuration for anterior chest support.

Bakrol

The Bakrol is a lumbar support designed for use by individuals needing to keep the lumbar spine in extension. Made of high-resiliency foam, rhe roll is available in a choice of regular or high density and is equipped with a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: The regular density comes in 11 x 5 inches or 12 x 4 inches and the high-density is available in 12 x 4 inches.

Ball Ratchet Set

The Ball Ratchet Set is a seating hardware allowing angle adjustment in 5 degree increments. It is made of cast and heat treated alloy steel. It can be bolted or welded inside 7/8 inch diameter by 18 gauge round tubing. The Set is useful for legrests, seat to back attachments, and other seating applications. It is available in chromed or unchromed.

Bambach Saddle Seat (Models Bss100 & Bss200)

The Bambach Saddle Seat, models BSS100 and BSS200, is a posture chair designed to improve posture and balance and relieve pain for individuals with a variety of neurological and musculoskeletal disorders. It promotes a comfortable, upright posture that maintains the spine's natural curves even in the presence of significant physical impairment. It encourages mobility by enabling users to use their feet to propel themselves around the work area with freedom of arm movement. Safe reach distances a

Bambach Saddle Seat (Models Bss100+B1R And Bss100+B1R Bss200+B1R)

The Bambach Saddle Seat with Foot Platform, models BSS100+B1R and BSS200+B1R, is a posture chair designed to improve posture, balance, breathing, and head/trunk control in small children with cerebral palsy, muscular atrophy, dysplagia, brain injury, and other neuro-musculo-skeletal disorders. It provides a comfortable, upright posture that maintains the spine's natural curves even in the presence of significant physical impairment. The user maintains freedom of arm movement and safe reach dista

Band-It

Band It is an ankle strap designed for use by individuals with lower extremity and neurological disabilities who use wheelchairs. This positioning device is designed to be secured around the ankle, with the body of the device extending over the top of the userÆs shoe and orthosis. The device has a dynamic component that allows some movement at the ankle to prevent joint stiffening and full body tonal reaction, and reduce buttock shear. The device has a side-squeeze closure that can withstand 250

Bariatric Seat Cushion

The Bariatric Seat Cushion is a foam cushion designed to prevent pressure sores or ulcers in individual who sit for long periods of time. Made of firm density 100-percent polyurethane foam, the cushion provides added support and comfort for larger individuals. DIMENSIONS (LxW.H): 20 x 16 x 4.5 inches. CAPACITY: 250 pounds. COLOR: Navy.

Bariatric Wheelchair Cushion (Models Msc26320184, Msc26322184, Msc26324184, Msc26326184, & Msc26328184)

The Bariatric Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The cushion is constructed with a gel pack placed between two layers of foam, and it has a Nylex cover. DIMENSIONS (HxLxW): 4 x 18 x 20 inches (model MSC26320184), 4 x 18 x 22 inches (model MSC26322184), 4 x 18 x 24 inches (model MSC26324184), 4 x 18 x 26 inches (model MSC26326184), or 4 x 18 x 28 inches (model MSC26328184). CAPACITY

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Basic Wedge Cushion

The Basic Wedge Cushion is a seat cushion made of high density foam designed to not flatten out under the user's weight. The wedge shape is intended to encourage a modified anterior pelvic tilt that results in upright sitting posture and discourages slipping forward in the chair. This cushion may be used in Geri chairs or wheelchairs. A No-Slip, water resistant cover is included. DIMENSIONS: 16 x 18 inches (no. 260), 16 x 16 inches (no. 261), or 14 x 14 inches (no. 1287). Thickness tapers from 3

Beach Chair Supports Child With Cerebral Palsy.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Posture chair with a wide base to allow stability on uneven ground. Chair made with plastic water pipe and fittings, with the deep seat made of nylon mesh, pop riveted to the frame. There is a chest high bar which can be fitted across the front. Designed for an active child with cerebral palsy. COMMENTS: Working drawings of the chair are available from: Technical Aid to the Disabled, 227 Morrison Road, PO Box 108, Ryde, New South Wales 2112, Australia.

Bean Bag Dinner Tray

The Bean Bag Dinner Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed to rest directly on the user's lap, this plastic tray attaches to a bean bag with a hook and loop strap. The removable bean bag provides a form fitting and comfortable support on the user's lap. The tray's raised edges are intended to stop items such as cups and plates from accidentally sliding off the tray. DIMENSIONS (WxD): 16 x 12 inches. COLOR:

Bedlounge

The BedLounge is a back support cushion designed for use by individuals with physical disabilities. Resembling a chair without a seat, this large cushion enables the user to sit upright in bed and provides support for the upper and lower back, arms, shoulders, neck, and head while the user reads or watches television. This padded support has a lightweight internal polypropylene frame and features pivoting armrests and a height- and angle-adjustable headrest pillow. Storage pockets on the armrest

Betterposture Kneeling Chair - Standard (Model F1420)

The BetterPosture Kneeling Chair - Standard, model F1420, is a height-adjustable posture chair designed to promote good posture and strengthen the lower back muscles. The user sits in a kneeling posture with the knees resting on a knee pad. This manually height adjustable kneeling chair has a steel frame with nylon casters. The seat and knee pad are made of supportive polyurethane foam covered with durable fabric. DIMENSIONS (HxLxW): 21 to 28.5 x 29 x 18 inches. The seat is 12.5 x 17.5 inches. T

Bi-Angular Back Bracket

The Bi-Angular Back Brackets are stainless steel brackets designed for attaching two solid back sections at 160- (model BB-6060), 165- (model BB-6065), 170- (model BB-6070), or 175- (model BB-6075) degree angles.

Bi-Level Footrest Extender (Series 7033)

The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and

Bifloat (01-7000 Series)

Bifloat cushion is fabricated from a lamination of two foam layers. The top is a high resiliency medium firm polyurethane. Base layer is a high density extra firm Neoprene foam. The average weight is 2 to 4 pounds. Standard sizes are 16 inches by 16 inches by 2, 3 or 4 inches, and 18 inches by 16 inches by 2, 3, or 4 inches.

Biologics Microsolo 900 Transport

The Microsolo 900 Transport is alternating air pressure flotation seat cushion and mattress surface designed for use by individuals at risk for pressure sores. This software-based system can be used with a variety of surfaces for continuity of care, including a wheelchair seating system, a mattress replacement, an overlay for prevention, as well as surfaces for operating room tables and stretchers. The system utilizes the ArchimedesLinker Algorithm which automatically measures the user's weight

Birillo Gait Trainer Walker Size 1

The Birillo Size 1 is a gait trainer / walker specifically designed to give a child with special needs the ability to move freely and safely around the home, school, daycare, and therapy environments.

Black Trays

The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.

Body Ryzm Jazz Rx Seat Cushion

JazzRX is a clinically designed back cushion meant to help reduce the health risks of sitting still, prevent "C" curve in the back and improve spinal alignment. It helps reduce back pain during long periods of sitting whether in car, airplane or at work and home. DIMENSIONS: 16 inches length x 0.5 inches height x 16 inches width inches. WEIGHT: 1.1 pounds. COLOR: Black. WARRANTY/GUARANTEE: 3-year, 100 percent performance guarantee.

Body Ryzm Samba Rx Seat Cushion

The Samba RX is an ergonomic seat meant for periods of endurance sitting. The cushion is meant to provide increased lumbar and lower back support. DIMENSIONS: 18 inches height x 15 inches width x 0.5 inches depth. WEIGHT: 1 pound. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.

Bolster Chairs (Models B3, B3C, B3Ccs, B4, B4C, & B4Ccs)

Bolster Chairs, models B3 through B4CCS, are adjustable chairs with attached desks for children with neurological or severe physical disabilities up to 48 inches tall. The B3 Series is intended for children two to six years of age up to 42 inches tall. The B4 Series is designed for children five to eleven years old up to 48 inches tall. FEATURES: Models B3CCS and B4CCS have casters, an anterior support, and adjustable lateral supports. Models B3C and B4C have 4-inch swivel locking casters. Stand

Bolster Thoracic Supports

The Bolster Thoracic Supports are straight lateral trunk supports designed for use in conjunction with the Otto Bock MOSS II seating systems (see separate entries). Two sizes of polyurethane foam pads ($20 to $18) slide over straight or 1 or 2 inch offset metal fixtures which mount to the sides of aluminum channel back frames ($29.25). They are adjustable vertically. They are available with strap kits which attach with velcro or buckle closures to the front of pads for anterior trunk support. CO

Bolsters And Stands (Models Ap142, 1421, & 1422)

The Bolsters and Stands are therapy rolls designed for use in therapy to develop balance and posture control in infants and children with neurological and physical disabilities. The bolsters have a washable vinyl exterior over a foam-covered core with carrying straps at each end. The adjustable wooden stands support and elevate the bolsters and can be used as small benches. DIMENSIONS (Diam.xL): Bolsters are 4 x 25 inches (model AP142), 8.5 x 43 inches (model 1421), and 10 x 50 inches(model 14

Boppy

Boppy is a body positioner designed to provide support for infants in a prone or suppine position and to provide support while sitting for young children.The C-shaped padded, cushion style support features an opening to cradle an infant or to fit around a child's hips. Two of these cushions may be stacked for support while sitting. OPTIONS: Cotton slipcover. COLOR: The pillow is white. The slipcover is available in blue with bees or pistachio dots.

Bottoms Up Pelvic Spinal Posture Seat

Contoured seat to relieve back, hip, leg pain and sitting fatigue, prevent slumping, slouching and pressure on the trochanters. Can be used in cars, wheelchairs, hi-chair, home and office furniture. Widths 16, 18, 20 and 22 inches. Infant and junior models available.

Brown Leatherette Deluxe Swivel Cushion

The Brown Leatherette Deluxe Swivel Cushion is a cushion designed for the car to aid individuals who need help getting out of the car and relief from sitting for long periods of time. Raises users seat and view by 1-1/2", and swivels 360 degrees to help users get in and out of the car with ease. Foam padded and lightweight, it also helps prevent hip and back strain caused by long hours of sitting. Use it in the driver or passenger seat. MATERIALS: Removable brown leatherette cover w/elasticized

Bts / Sts Custom Fixtures & Bending Tool

The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut. The bending tool may be clamped in a vice and used to shape the rods.

Bucketseat Lumbar Cushion

The Bucketseat Lumbar Cushion is a back support cushion designed to fit snugly against bucket seats to provide lumbar support and promote proper seating posture. Made of molded foam, the cushion has contoured edges and is available with or without a securement strap. DIMENSIONS: 15 x 13.5 inches. COLOR: Blue, burgundy, beige, or grey.

Buckles & Belts

Wheelchair seatbelts with 2 types of hook and loop closures, molded plastic Delrin buckle (operates by pinching both sides of buckle simultaneously), lever aircraft buckle, or push button aircraft buckle. Two piece or single continuous belts. Available sizes from 48 to 108 inches.

Bumbo Baby Sitter

The Bumbo Baby Sitter is a positioning chair designed for use by infants between the ages of 3 to 14 months who have neurological or physical disabilities or cerebral palsy. This chair is constructed so that the baby's own body weight helps to gently keep them in place and in an upright sitting position. The chair is made of low-density polyurethane. It is also latex free, hygienic, and designed to be easy to clean. OPTIONS: Attachable tray. COLOR: Assorted.

Bun-Ease Cushion

The bun-EASE Cushion is an air cushion padding designed to offer comfort and protection for patients with hemorrhoidal and coccyx trauma or for surgical aftercare. It provides lateral and longitudinal seating positions for the greatest possible patient comfort and maximum protection of the injury. The cushion is made of heavy guage soft vinyl, is light in weight, and is easily inflatable with two to five normal breaths. It quickly deflates and flattens so it can be folded and discretely carried

Butterfly Strap (Models Bb01, Bb02, Bb03, Bb11, Bb12, Bb13, Bh01, Bh02, Bh03, Bh11, Bh12, Bh13)

The Butterfly Strap is a padded chest panel with vinyl upholstery designed for providing trunk support for seated individuals. It is available in buckle (BB-) and velcro (BH-) styles in sizes small, medium and large. The strap is available in black and gray.

Bye-Bye Decubiti Back Cushion

The Bye-Bye Decubiti Back Cushions are inflatable air flotation pads designed to provide therapeutic support and pressure absorption to the back in cars or wheelchairs. The cushions are made of natural rubber covered with fabric or fleece, and have elastic straps with velcro to hold the pads in the desired position. The cushions may be inflated by mouth or hand pump to any fullness desired. DIMENSIONS: 7 x 20 inches for car, 8 x 15 inches for wheelchair. WEIGHT: 1 pound.

Bye-Bye Decubiti Seat Cushions

The Bye-Bye Decubiti Seat Cushions are air flotation cushion made of heavy gauge, resilient natural rubber. Several models are available to fit most standard wheelchair seats. The cushions are inflated by mouth or by low pressure air pumps, and can be adjusted for fullness to accommodate individual comfort and stability requirements. These cushions are washable and autoclavable. They can be used in bed, the bathtub, shower, boat, or stadium. The slip on covers are available in synthetic fleece (

Cam Belt With Grommets (Model Es-350)

The Cam Belt with Grommets, model ES-350, is a child belt restraint for pelvic stability. The two-piece belt is made of automotive seatbelt nylon and has a nylon buckle. The belt attaches with grommets to various therapeutic equipment and seating aids. The nuts, bolts, and washers required for installation are included. DIMENSIONS (LxW): 40 x 2 inches.

Cando Metal Ball Chair

The CanDo Metal Ball Chair is a mobile ergonomic seating system designed for adults who sit in chairs for long periods of time. This chair combines ball therapy with a chair base. The ball is held securely in place. Chairs are height adjustable and come with a removable, adjustable back. Light assembly required. The 5 non-locking casters glide easily on carpet or hard surfaces. Prevents against back pain, sciatic nerve pain, poor leg circulation, and headaches. This chair has arms.

Carbon Series Back Support

The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou

Careflex Huggle Therapeutic Chair

The Careflex Huggle Therapeutic Chair is designed to provide a prescriptive postural solution for those with disabilities in the classroom. The Huggle features a single frame design that can be adapted for the individual needs of a child. It comes as standard in the open Sprite configuration, though is often customized with various accessories. The Huggle’s modern design is adjustable.

Carrie Potty Seat (Models Pc 2771P & Pc 2771J)

The Carrie Potty Seat is a child commode designed to be positioned over a toilet or used as a free-standing unit. The shape of the commode maintains the user's legs in slight flexion and abduction to encourage bowel and bladder functions. Lateral supports and a tray help provide trunk stability. A built-in anti-thrust seat maintains pelvic positioning. The seat is made of Tumble Forms' high-density foam and covered with a flexible coating, making the Potty Seat washable, seamless, impervious to

Carrie Rover Stroller (Models 4642, 4643. 4644, & 4645)

The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be u

Chair Base Plate

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair base plate for a child with multiple disabilities. The child is unable to sit on a chair without support and when she is at school,. she is either in her wheelchair or in a wood chair with a lap strap. Although the lap strap holds the child securely, the child can still rock her chair back and forth with a significant risk of toppling over. The child’s occupational therapist recommended that a base plate be fitted to

Chair For The Child With Hypertonic Cns Dysfunction.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with a cylindrically shaped seat for the child to straddle, in order to promote balance and encourage adduction and external rotation of the hip, hip and knee flexion and ankle dorsiflection. Describes child's chair made with a length of 10 inch sewer pipe on a base high enough that the child's feet rest flat on the floor. The base and backrest are made of wood. Seat and back are padded, and velcro straps may be added as thigh supports. Includes

Chair Insert

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair insert for a child with global developmental delay and epilepsy. The child had outgrown his previous insert and a new version was required. The new insert has a plywood back set at a 10-degree recline, a plywood base and footrest, height-adjustable thoracic fins, and cushions made from fabric-covered, 25-millimeter foam. There are also a range of harness mounting points, and the child uses the chair with a waist harne

Chair Mate Adaptive Seating System

Seating system with ABS plastic solid base. Covered in vinyl upholstered foam. Drop hooks allow 9 different positions. As its highest, seat is level with seat rail and has 2 inches of tri-density foam. At its lowest, seat is 3 inches below seat rail. Terry cloth cover available. Lowest back height from seat 16 inches, the highest back height 4 inches above the push handles of standard adult wheelchair. Flat lateral supports adjustable both vertically and horizontally. Lateral supports available

Chair Support For Recliner

CUSTOM ADAPTATION PURPOSE: To provide support for an individual with Parkinson's disease who leans to the right when fatigued. A Henley Twin Electic Recliner was custom-made to the user's measurements. Once the chair was complete, it was modified by adding thoracic fins to maintain the body in an upright position. The fins were mounted on brackets spaced 300 millimeters apart on a steel tube frame. The right-hand bracket, the side on which the user primarily needed support, could be moved up an

Chair Which Provides Support

CUSTOM ADAPTATION PURPOSE: To enable a child to play in a sandbox. A large plastic bucket in which pickles were delivered to a fast food restaurant was washed numerous times to remove the pickle odor and was then cut to form a seat with a high back and sides. The front half was cut away in the shape of a "W," with the front indentations supporting and positioning the child's legs. The cut edges were covered with rubber padding and the seat was fixed to a circular wooden base for stability. A fo

Chairpro Underseat Alarm

The Chairpro UnderSeat Alarm is a wandering patient system and seating safety monitor designed for people with lower extremity, mobility and balance disabilities and other who use wheelchairs and have Alzheimer's disease, dementia or other cognitive disabilities. The ChairPro sounds an alarm when the user leaves the chair without assistance. Designed to fit all sling-seat wheelchairs up to 22-inches wide, this sensor alarm activates when the user rises and automatically resets once the person is

Chairries With Tray

The Chairries with Tray are positioning chairs designed for use by children with mobility and physical disabilities. Designed for play, feeding, and classroom activities, these stackable activity chairs are constructed of Baltic birch with rounded edges and corners. Features include a seat belt for secure seating and a detachable tray made of easy to clean vinyl. Six seat heights are available. DIMENSIONS (HxDxW): Size 1 is 5 x 7 x 11.75 inches. Size 2 is 7 x 7 x 11.75 inches. Size 3 is 9 x 7

Channel Armrest Fixture (Model 436F1)

The Channel Armrest Fixture, model 436F1, is a pivoting, elevating armrest designed to be attached to the arm of a wheelchair with a fitted clamp. The swivel configuration allows the armrest to turn on its horizontal and vertical axis for more comfortable positioning. It can also be used to mount and position hand control units for powered wheelchairs.

Chattanooga Wheelchair Cushion

The Chattanooga Wheelchair Cushion is a gel flotation seat cushion designed for use with wheelchairs. The top layer is made of antibacterial treated brushed tricot and the bottom layer is made of nylon pack cloth. The cushion has a gel-like center. The cushion has a built-in carrying handle. DIMENSIONS: The cushion is 17.5 x 18.5 x 2 inches. The carrying handle is 6 x 1 inch. CAPACITY: 325 pounds. WEIGHT: 12 pounds.

Checkerboard

Checkerboard is foam material made of high density foam cut to a checker board pattern for pressure relief. Sold in sheets.

Chest Strap & Chest Strap With Pads

Soft velcro 2-inch chest strap with side taps. Mounts to solid back or lateral trunk supports with D-rings or buckles. Machine washable. Smaller size available. Can also be ordered with 4 custom size pads to provide flexible surrounding torso support when mounted to solid back with D-rings or buckles. Pads are 1/2 inch medium density foam and 1/2 inch birch plywood and should not exceed 3 inches height.

Child Wheelchair Tray (Model 766C)

The child wheelchair tray fits all wheelchair sizes. The top is made of mar-resistant wood grain laminate and has a 1/2 inch rim. DIMENSIONS: 21 x 18 x 12.5 inches with a 7.5-inch cut out.

Child's Arm Chair

The Child’s Arm Chair is a positioning chair designed for use by children with neurological or physical disabilities. Made of Blonde Mountain Ash, this chair is designed for comfort and support for home or school settings. The chair reclines from a 90 to 70 degree angle with supporting arm rests. OPTIONS: Work tray. DIMENSIONS (DxW): The seat is 10.5 x 13.5 inches. The seat height is 11 inches from the floor. The armrests are 20.5 inches from floor to top. The small back is 12 inches wide and 1

Child's Bath Position Aid

The Child's Bath Position Aid is a child bath support designed to support the child in the long sitting position in the bath. This support features an aluminum frame, adjustable double chest belts and a lap belt with plastic snap buckles, and a plastic foam seat support covered in open-mesh vinyl knit. Foam cushions protect the tub surface. OPTIONS: A 5-inch or 7-inch tray to covert the aid to a floor sitter is available. DIMENSIONS (LxWxH): The frame is 24 x 16.25 x 14 inches.

Chill Out Chair Roller

The Chill-Out Chair Roller is a specialized therapeutic seat that features a unique deep v design to provide additional stable support to those who need trunk alignment.

Clamp-- Positioning, Swivel Hold Down, Fixed Hold Down

These Clamps are seating hardware designed to be used in wheelchair seating systems. The Positioning Clamp has applications where clamping of the mounting hardware is fastened to the tubing of the wheelchair. It is most often used on the rear of the wheel base to position the chair initially and to keep the chair from shifting. The Swivel Clamp is a riveted one-piece design, used for securing the seat to the wheel base or wheelchair. By turning the swivel hold-down 90 degrees, complete seating d

Classic Portal

The Classic Portal is a treatment chair designed for therapists assisting persons with biomechanical exercises. Made from an all maple and veneer construction with an environmentally safe lacquer finish, it is designed for ideal use in a corporate, spa, salon or clinical setting. This adjustable support system takes about 30 seconds to set up. It features a QuickLock arm rest with a valuables pouch and a QuickLock face rest; a carrying case with a nylon shoulder strap and handle are additionally

Classroom Positioner Chair (Models Cpc25, Cpc29, & Cpc33)

The Classroom Positioner Chair is a youth positioning chair designed for use by children with mobility or neurological disabilities. This wooden chair features independent adjustment of the height, depth, and angle of the seat back and footrrest. The contoured seat cushion can be set at up to 20 degrees anterior tilt, as well as level or at a posterior tilt. The chair comes standard with a contoured seat cushion, seat belt, back pad, lateral supports, and locking casters. OPTIONS: Foot surface w

Classroom/transport Mobility Base

The Classroom/Transport Mobility Base is a wheeled base for the Snug Seat 1 seating system (see separate entry). This trolley-style base is designed to place the child at preschool table height of about 18 inches to aid in peer interaction, communication, and feeding activities. Standard features include a polyester powder coat finish, safety lock, rear caster locks, and 4 swivel casters. DIMENSIONS (HxLxW): 5 x 18 x 15.5 inches. WEIGHT: 9 pounds. COLOR: Antique gray.

Clear Acryic Wheelchair Tray (Model H1202)

The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.

Clear Acrylic Wheelchair Tray (Model 5000)

The Clear Acrylic Wheelchair Tray, model 5000, is a lapboard designed for use with wheelchairs. The transparent acrylic is lightweight and the universal design fits all wheelchairs. The tray attaches with Velcro straps. DIMENSIONS: 23 x 19 x 1/4 inch.

Clear Acrylic Wheelchair Tray (Model 6662)

The Clear Acrylic Wheechair Tray, model 6662, is a lapboard designed for attachment to a wheelchair with Velcro straps. It is transparent, lightweight and has a universal design. DIMENSIONS (LxWxH): 23 x 19 x 1/4 inches. WEIGHT: 3 pounds.

Cloth Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Overcomes the difficulty of a person in a wheelchair to balance objects on the lap. Cloth tray with stiffened edges can be constructed to provide a flat surface on which to place articles. Stiffened edge serves to prevent things from slipping off the tray. Made of 1 and 1/8 yards of fabric or 1/2 yard each of two contrasting fabrics, velcro, and 1 and 1/8 yard rubber tubing or garden hose. COMMENTS: Simple pattern and instructions for construction are

Cloud Cushion, The

The Cloud Cushion is a foam wheelchair cushion designed for use by individuals at risk for pressure sores or ulcers. The Cloud Cushion offers protection and stability in a lightweight, low-profile design. It produces acceptable levels of pressure distribution, eliminating the risk of bottoming out and the potential for failures due to punctures or leaks. The cushion corrects to automatically adjust to the dynamic conditions that occur within the seating environment. The Lycra Cel-Pak is install

Coccyx Cushions (Models N1001 & N1002)

The Cocccyx Cushions are foam seat cushions designed for use in wheelchairs. These cushions have a firm foam base, a coccyx cutout, and a removable zippered cover. DIMENSIONS: Model N1001 is 3 x 16 x 16 inches and model N1002 is 3 x 16 x 18 inches. COLOR: The cover is navy.

Coccyx Gel Cushion

The Coccyx Gel Cushion is a foam wheelchair cushion designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to relieve pressure to the spine for wheelchair users, this cushion is made of a high density foam and gel combination for added strength and durability. It features a square shaped cutout for the coccyx to aid in proper weight distribution. DIMENSIONS (LxWxH: 18 x 16 x 3.5 inches. COLOR: Blue.

Coccyx Relief Sit-Straight

The Coccyx Relief Sit-Straight is a foam cushion with a convex solid seat insert base and a dished coccygeal area for pressure relief. The cushion is made of a high density foam for cushioning and support with a top layer of T-Foam (see separate entry), a pressure-relieving flotation-like foam material. The cushion is covered in Alitex, a Gortex based, breathable, waterproof fabric. DIMENSIONS: 16 x 18 inches (no. 1246) or 16 x 16 inches (no. 1247).

Coccyx Wheelchair Cushion

The Coccyx Wheelchair Cushion is a foam seat cushion for coccyx pressure relief for wheelchair users. This cushion features a V-shaped cutout for the coccyx and a masonite insert for additional strength and rigidity. This cushion is available with a choice of a rip-stop nylon cover or a plaid fabric cover. DIMENSIONS: 16 x 18 x 2 inches.

Collapsible Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair lapboard folds and stores on back of chair. Lightweight lapboard attaches to full length wheelchair arms. It folds in half and can be used as a short lapboard, or removes and stored easily on the back of the wheelchair. Includes picture. SKILLS REQUIRED: Woodworking AUTHOR: Bob Warren, UCP of Akron, 318 Water STreet, Akron, OH 330-376-6041. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Employment of Handicapp

Columbia Medical Therapedic Chlid Car Seat

The Columbia Medical Special Needs Car Seat is available for children who have outgrown regular car seats. It will fit children from 20-102 pounds and up to 60 inches tall. The seat is designed for those who cannot sit upright unassisted.

Columbia Therapedic Explorer Mobility Base (Model 2100)

The Columbia TheraPedic Explorer Mobility Base, model 2100, is a stroller base for a detachable car seat designed for use by children with balance disabilities, neurological disabilities, and severe physical disabilities. This stroller base fits the Columbia TheraPedic Positioning Seat (see separate entry). The base folds for storage, and has a Tilt-In-Space feature that allows the seat to be tilted in any of five positions in the base. FRAME (HxLxW): 37 x 47 x 22.5 inches when open; 11 x 41 x 2

Columbia Therapedic Positioning Seat (Model 2000)

The Columbia TheraPedic Positioning Seat, model 2000, is a car seat designed for use in the transport of children with physical and neurological disabilities affecting balance and the ability to sit upright. The seat can be used by children up to 5 feet tall, and may also be used as a wheelchair insert. The unit consists of a vacuum-formed ABS plastic shell with chromed steel side tubes, fire-retardant upholstery, a five-point nylon webbing safety harness, and a nylon webbing supplementary tethe

Columbia Wrap-Around Bath Support (Models 7200, 7300, & 7700)

The Columbia Bath Support is a child bath seat designed to hold a child in a normal sitting position to provide trunk stabilization and to free the hands of the individual helping to bathe the child. It may also be used in other seating applications and in supervised wading pools. The support has a secure, contoured trunk yoke. The chair frame rests on the bottom of the tub and has a soft coating to protect the tub's finish. The seat features a rustproof frame, a rip-proof mesh seat, and stainle

Combo T-Foam Cushion (Models 1175 & 1176)

The Combo T-Foam Cushion is a foam seat cushion designed to provide pressure distribution, fight pressure sores, and provide superior sitting stability. The cushion is made of trilaminate construction that combines the best of T-Foam in a single cushion. The top layer of the Combo is 1-inch thick T-Foam; the middle 1-inch thick layer is medium grade for full flotation, regardless of user weight; and the base layer is made of high-density foam that will not bottom out under hot, humid conditions.

Comfort Cushion (Model 8050)

The Comfort Cushion, model 8050, is a non-slip rubber-foam cushion designed for use by individuals with mobility or balance disabilities. Made of cellular plastic, the cushion is placed under the buttocks to prevent the user from sliding down in bed and at the same time relieve pressure on the abdomen. Placing the pillow under the knees is also comfortable and relieves leg pressure. DIMENSIONS (LxW): 40 x 50 centimeters.

Comfort Plus Wheelchair Liner (Model Vlm6630)

The Comfort Plus Wheelchair Liner, model VLM6630, is a decubitus pad designed for use by individuals with mobility disabilities or spinal cord injury who are at risk for pressure sores/ulcers. The pad covers the wheelchair seat, sides and arms, and back, and is made of lightweight, latex-free fiber material that resists matting and allows air circulation. It has an incontinence cover on one side and is machine washable. COLOR: White.

Comfort Plus Wheelchair Seat Pad (Model Vlm6610)

The Comfort Plus Seat Pad, model VLM6610, is a decubitus pad designed for use by individuals with mobility disabilities, severe physical disabilities, or spinal cord injury who are at risk for pressure sores/ulcers. This latex-free wheelchair seat pad is made of a lightweight material that resists matting and allows air circulation. The pad has an incontinence cover on one side and is machine washable.

Comfortarm Armrest

The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swin

Comfortline Series

The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i

Comfy-Back Bacpac (Model 400)

Lumbar cushion which includes reusable hot or cold pack. Gel pack is microwave heated, or frozen and then inserted under fabric flap with Velcro closures. .

Comfy-Back I (Model 100)

Back support provides extra-firm lumbar support. Fabricated of high density foam. Half-rounded cushion attaches to any seat back with adjustable 3/4 inch non-roll elastic. 15 inches long by 3 inches wide by 5 inches high. Nylon covers have zip closure. Washable. Colors available.

Comfy-Back Ii (Model 200)

Back support with angled coccyx support. Adjustable. Vinyl hinge tilts spine upward and pulls half round lumbar cushion into lower back. Lumbar cushion is Velcro-backed. Attaches to any seat with adjustable 3/ 4 inch elastic. 15 inches long x 5 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.

Comfy-Back Iii (Model 300)

Seat and back support with half-rounded cushion attached to back and wedge-shaped square seat. 15 inches long by 15 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.

Comfy-Back Jr (Model 500)

Back support. Two half round cushions are hinged open for customized lower back support. One half is firm, other soft. Can close to form round cervical roll for back or neck. Fabricated of polyurethane foam. Nylon covers have zip closure. Washable. Attaches to any seat with adjustable 3/4 inch elastic. Dimensions: 12 inches long by 3 inches wide by 11 inches high. Has 6 inch diameter when closed. Colors available.

Complete Feet

Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.

Complete Feet Single Foot

The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.

Compu-Cush

The Compu-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, this cushion is specially designed for use while using a computer. Features include a wedge-shaped design to tilt the pelvis forward, a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable velour cover. DIMENSIONS: 13 x 16 inches. COLOR: The cover is black. WARRANTY: One-year lim

Conforma Extracted Pad (Models Msc0398046, Msc0398056, Msc0398057, Msc0398066, Msc0398157, & Msc0398156)

The Conforma Extracted Pad is a wheelchair decubitis pad designed for use by individuals with mobility disabilities or spinal cord injury at risk for pressure sores/ulcers. This foam pad is made of an anatomically conforming material that accommodates ischial tuberosities and the normal sacral shape to provide spinal support and stable positioning, distribute weight evenly, reduce pressure, and protect the integrity of the skin. The pad is available with a Nylex cover (models MSC0398046, MSC0398

Constructa Foam

Constructa Foam is lightweight, rigid, closed-cell polyethylene based foam material designed to be simultaneously firm, supportive, and resilient. Suggested uses are customized positioning, seating, and support systems. The foam is generally covered because its surface is somewhat abrasive to the touch. DENSITY: Medium is 2, Firm is 6, X-Firm is 9, and Super Constructa is 2 pounds per cubic foot. DIMENSIONS: Constructa Foam is available in cylinders (2, 4, or 6-inch diameter x 36 inches) and sla

Contour Back Cushion

The Contour Back Cushion is a back support cushion designed for use by individuals with arthritis. Its orthopedic contour shape allows for a correct sitting position, minimizing lower back discomfort. The molded foam rubber cushion comes with a removable cover. DIMENSIONS (HxDxW): 14.25 x 4.5 x 13 inches.

Contour Freedom Back Support Cushion

The Contour Freedom Back Support Cushion is back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is designed to fit the curve of the back and features a full-length back support with 10 zones for alignment and support in any chair. The tapered top supports upper back and shoulder blades to allow upper body movement and the contoured bottom eliminates pressure from tailbone and hips. A

Contour Positioning Cushion

The Contour Positioning Cushion is a gel and foam seat cushion designed for uswe at risk for pressure ulcers who use wheelchairs. This cushion provides support for good sitting posture and utilizes multi-layered foam currounding three gel cores to provide maximum pressure reduction. The molded built-up front disperses the user's weight through the back of the thighs, while the center keeps the leg properly positioned. OPTIONS: A Staph-Chek Fusion cover is available. DIMENSIONS: 18 x 18 x 5 x 4 i

Contour Seat Cushion (Model Sc1500)

The Contoured Seat Cushion, model SC1500, is a wheelchair seat cushion with a contoured base designed for individuals with severe physical disabilities who spend extended time in a wheelchair. The cushion is made of a variety of open-cell and closed-cell foams, starting with a closed-cell base and a contoured open-cell layer. Then a one-inch Viscoelastic contouring foam is overlayed, providing maximum pressure distribution. Velcro strips are sewn in the Rubatex slipcover for secure seat placemen

Contour Support

The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Made of molded foam, this support is intended for use with firmer seating such as office chairs or car seats. The roll includes a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: 18 x 6 x 2.5 inches.

Contoured Back (Model Cb2000)

The Contoured Back, model CB2000, is a curved back insert for wheelchairs designed to position individuals with severe physical disabilities when seated in a wheelchair. The Back Support Panel is made of high-strength aluminum alloy laminated with a black textured vinyl and edged with a continuous neoprene edging which is formed for a contoured fit. All mounting holes are a stardard one-inch between centers. Mounting hardware allows for a variety of back angle adjustments with positive locking.

Contoured Headrest Assembly

The Contoured Headrest Assembly is designed for individuals requiring medial/lateral, posterior and rotary support. The ABS plastic construction allows for customized molding with a heat gun. The mounting hardware (included) allows height and forward/backward adjustment with a slide bracket and knob. The headrestt is also available upholstered. SIZE: Large (model ASCH-LG) or small (model ASCH-SM).

Contoured Hip Pad Kit - As4000 & As5000 (Models 4341-71, -72, -73, 4343-71, -72, -73, 4347-71, -72, -73, 4350-71, -72, -73, 4353-71, -72, -73)

The Contoured Hip Pad Kit is a lateral hip guide designed to position the hips of an individual with spinal cord injury or severe physical disabilities while seated in a wheelchair. The pads are designed with internal threads front and back for mounting to support brackets which attach to seat bottom. They are adjustable from front to back, in and out, and up and down. There is also a set of internal threads for subasis bar mounting. The Contoured Hip Pad has a contoured shape for maximum hip an

Convaid Carrot 3 Special Needs Booster Seat

Convaid Carrot 3 Special Needs Booster Seat is a restraint system designed for children and teens 3-15 years of age with special needs. This special needs booster was designed to provide optimal positioning & safety for children with limited head, trunk, and pelvic stability with neurological and motor disabilities. The “free angle” recline allows the hip area to recline for diaper access and changes (reclines at any position from 90 -180 degrees). Modular extensions and accessories allow e

Convertible Children's Chair

The Convertible Children's Chair is a floor sitter designed for use by children with physical and neurological disabilities. Designed for children aged 0 to 3, this sitter features a large, see-through tray that surrounds the child on three sides, a bucket-style seat with expandable trunk supports, and a separate snap-on abductor seat. The tray can also be used independently of the seat.

Convex Gel Cushion (Models 6518 & 6518W)

The Convex Gel Cushion is a gel and foam seat cushion designed to reduce the risk of pressure sores and to support posture for people who use wheelchairs. This cushion features a firm convex bottom to fill a wheelchair sling to provide a stable seating surface. The waterproof cushion is available in a standard model (no. 6518) and a wedge model (no. 6518W) and includes a non-slip, water-repellent, wipe-clean vinyl cover that unzips for removal. DIMENSIONS (WxDxH): Model 6518 is 18 x 16 x 3 inche

Convoluted Comfort Cushions

The Convoluted Comfort Cushions are foam seat cushionsdesigned for use by individuals who need extra padding for comfort while seated Made from high-quality polyurethane foam, the cushions are available in standard and high densities. DIMENSIONS: 18 x 16 x 4 inches, 16 x 16 x 3 inches, or 18 x 16 x 4 inches.

Convoluted Invalid Ring

The Convoluted Invalid Ring is an eggcrate foam ring seat cushion designed to relieve pressure. Made of flame- retardant convoluted polyurethane foam, the ring comes standard with a choice of a polycotton cover or a plaid fabric cover. DIMENSIONS: 16.25 x 14 1/8 inches. COLOR: The polycotton cover is white.

Convoluted Roam Ring (Model 513-7614-1900)

The Convoluted Roam Ring, model 513-7614-1900, is a ring-shaped seat cushion designed for use by individuals at risk for pressure sores/ulcers or who sit for extended periods. The cushion conforms to body contours to reduce pressure point discomfort. This cushion is made of puncture-resistant, high-density foam that retains its shape through repeated use. The removable polyester cotton cover is machine washable. SIZE: 18 inches. CAPACITY: 250 pounds. COLOR: White, navy, or plaid).

Convoluted Wheelchair Cushion

The Convoluted Wheelchair Cushion is an eggcrate foam seat cushion designed for use in wheelchairs. Designed to relieve pressure from prolonged sitting, the polyurethane cushion is flame retardant. OPTIONS: Plaid cover. DIMENSIONS: 16 x 18 x 3 inches or 16 x 18 x 4 inches. COLOR: The cushion is blue.

Convoluted Wheelchair Cushion With Back

The Convoluted Wheelchair Cushion with Back is an eggcrate foam seat and back cushion designed for use in wheelchairs. The flame-retardant convoluted polyurethane cushion helps promote good posture, prevent pressure sores, and prevent slipping. The cushion may also be used in standard chairs. DIMENSIONS: 18 x 36 x 3 inches. COLOR: Blue.

Convoluted Wheelchair Cushions (Series 755)

The Convoluted Foam Cushions, series 755, are foam seat cushions designed to provide pressure relief for individuals who use wheelchairs. The eggcrate-style foam cushions are available without a cover or with a choice of a polyester fabric or synthetic sheepskin cover. DIMENSIONS: The cushions are offered in 16 x 18 x 3 inches or 16 x 18 x 4 inches.

Convoluted Wheelchair Pad With Nylex Cover (Models Cbc019055, Msc019008, Msc019005, & Msc019010)

The Convoluted Wheelchair Pad With Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. The nylex cover is fluid-resistant and antimicrobial. The foam pad is convoluted or ridged to help prevent the user from sliding forward or out of the wheelchair. Model MSC019005 is latex-free. DIMENSIONS (HxLxW): 4 x 26 x 18 inches (model CBC019055), 2 x 16 x 22 inches (model MSC019008), 4 x 18 x 18 inches (model MSC019005), or 3 x 18 x 18 inches (model MSC0190

Cool Mesh Back Support System

The Cool Mesh Back Support System is a lumbar support designed for use by individuals with lower extremity disabilities, back pain, or those who have difficulty sitting for long periods. Designed to help promote good posture and lumbar support, this ergonomic back support can be used at home, work, or in a car. The system is made of mesh fabric that allows cool air flow comfort and attaches to the seat with an elastic strap. The strap can be adjusted upward and downward.

Cordless Chair Sensor Pad

The CordLess® Chair Sensor Pad provides caregivers with an efficient method of knowing when a resident or loved one is getting up from a chair. This device, which is a tool to help care for those with Dementia or Alzheimer's, must be used with the 433- EC Economy CordLess® Alarm or with the TL-2100G CordLess® Fall Monitor (please see separate entries).

Corner Chair

The Corner Chair has been developed specifically for young children from the age of 8 months with neurological, mobility, or severe physical disabilities who are working on improving their sitting balance. The Corner Chair is ideal for daycare, school and home environments. These chairs are designed to provide support at the back and sides of the child to improve sitting balance. These chairs are adjustable and grow with the child.

Corner Chair (Models C4, C4-C, C5 & C5-C)

The Corner Chair is an adjustable corner seat designed for use by children with neurological, mobility, or severe physical disabilities. This chair provides support for asymetrical posture and midline control of the head and trunk. All models include a firm, padded insert which converts the V-shaped back to a three-section wing back. The seat can be raised so the child can be positioned with the hips and knees flexed or lowered so that the hips are flexed and the legs extended to facilitate long

Corner Chair And Table.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Corner chair with pommel and optional table made to give extra support and to keep a child from leaning backward. Instructions for building a chair (of chipboard or plywood) with a right-angled back and a pommel, made to fit the child. Can be built without a base. The optional table is built in the shape of half a donut to provide further support. Includes diagrams. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for

Corner Seat

Free-standing molded ABS plastic seat with pommel and deep back for lateral trunk support. Separate trunk support pads or chest belt may be added, as can a modular headrest or footrest. Can be used with adjustable height table for work chair at home or classroom. Three sizes: Small and Medium with maximum seat depth of 12.5 inches and seat height of 8.5 inches. Large with maximum seat depth of 14 inches and seat height of 11 inches. Back is 18 inches high but can be cut to size before attaching

Corner Seat

The Corner Seat is a corner seat designed for use by children with neurological or severe physical disabilities. This chair is portable for use anywhere indoors or out and can also be used in a bathtub. It has an H-strap and hip belt to stabilize the shoulders, pelvis, and trunk and a built-in abductor to help maintain leg extension and reduce thrust. Features include a broad, stable base and easy-to-wash polyethylene surface. DIMENSIONS (HxLxW): 22.5 x 11 x 19 inches. The base is 17 x 27 inches

Corner Seat (Model 72140)

The Corner Seat, model 72140, is designed to facilitate normal sitting patterns inchildren aged 2 to 8 years old who need positioning while sitting. The seat places the hips lower than the knees to interrupt abnormal muscle tone, encourages legs to roll outward for stability, and keeps the back straight to prevent rounding. It also has an abduction pommel built into the front for knee separation. The seat may also be useful with spastic and athetoid children. The chair is made of canvase stretch

Corner Sitter

The Corner Sitter is a corner chair designed for use by children with neurological or severe physical disabilities. This chair is designed to help improve posture and promote upper body control. Features include a reclining backrest with adjustable sides for lateral support. The backrest angle is adjustable from a 20 degree recline to 15 degrees prone. Other features include a hip belt and an adjustable depth, removable pommel. The chair folds flat for storage. OPTIONS: Options include a high-ba

Cosmetic Chest Strap.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Shirts are modified to hide chest strap in wheelchair. Shirts and sweaters have small slits made at the appropriate height on each side. The straps are inserted through the shirt and secured in the correct position. The shirt is then buttoned over the chest strap to provide a better appearance in the wheelchair. SKILLS REQUIRED: Sewing. AUTHOR: TITLE: Clinical Forum. REF: Newsletter: Volume 1, No 1, Fortress Scientific, 61 Miami St, Buffalo, NY 14204.

Covered Solid Foam Cushion (Models F2050-6, F3050-6, & 4050-6)

Covered Solid Foam Cushions are foam seat cushions designed for use in wheelchairs. Made of high-density foam, these cushions provide firm seating and pressure relief and come with a zippered cover. DIMENSIONS: Model F2050-6 is 2 x 16 x 18 inches, model F3050-6 is 3 x 16 x 18 inches, and model F4050-6 4 is 4 x 16 x 18 inches. COLOR: The cover is navy.

Cozy Me

Cozy Me is a seat and back support designed to cushion and protect children riding in grocery cart seats. The soft, cushioned pad fits in the cart seat without ties and protects the child's seat and back and includes flaps to protect the legs. The machine-washable pad, which doubles as a changing pad, helps prevent sliding. COLOR: Multi-color vegetable print.

Cozy Seat

Modular seating system. Designed to support children one to three years who require special seating for support and positioning. Consists of a one piece seat and back shell made from ABS plastic with a cover and a metal frame. Can be reclined. Accessories: abduction pommel, head rest, flexible trunk bolsters, neck rest, tray, seat belt, chest belt and toy bar. Optional: back spacer to adjust seat length. Can be placed in strollers, wheelchairs, high chairs, toboggans.

Cozy Seat (Models 703005 & 703006)

The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.

Cozycare Unreal Sheepskin (Model 94076-Mn)

The Cozycare Unreal Sheepskin is a decubitus pad designed to prevent pressures sores in infants in incubators or open cribs. The pads are made of plush, thick polyester material that provides extra support and helps to evenly distribute pressure while allowing air to circulate. This pad is flame resistant, nonallergenic, and machine washable. DIMENSIONS (LxW): 17 x 20 inches.

Cpsc Corner Seat & Cpsc Corner Seat With Tray (Models Cs-01 To Cs-03 & Ct-01 To Ct-03)

Corner Seat supports young children in a good seated position and helps them gain independent sitting. The seat is available in three height sizes: small (6 1/2 inches), medium (8 1/2 inches), large (11 inches) and comes with built in pommel and adjustable back support. Padding, seatbelts and/or chestbelts may be easily be added. Available with adjustable tray.

Cpsc Foam In Place Seating Kit (Model Fp O1)

Casting frame and kit, model FP 01, allow custom molding of seat and/or back cushions on site. Foam is 2 part liquid Sunmate in soft, medium, or firm density. Casted cushions can be finished by trimming to fit and installing in modular plastic shells with lycra cover. Or cushions can be sent back to CPSC for vinyl covering and installation in shell. Shells available in 12, 14, 16, and 18 inch widths, any seat depth or back height. Full insert shell available with 90, 105, 120, 135 degree seat to

Cpsc Standard Back (Models Sb-01 Thru Sb-06)

Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.

Cpsc Standard Pommel Seat (Models Sp-01 Thru Sp-06)

Wheelchair seat insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Has a 15 degree wedged seat, a thigh shelf and an integral abduction pommel to provide good positioning and weight distribution. Standard cushion is removable and vinyl covered. Options include polyfoam or viscofoam cushion, lateral padding, reinforced side panels. 7 sizes: 11 inches wide by 13 inches deep, 12 by 14 inches, 13 by 17 1/2 inches, 14 by 18 inches, 15 by 20 1/ 2 inches, 16 by 20

Cpsc Transfer Seat (Models Ts-02, Ts-04, & Ts-06)

Wheelchair insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Seat has 7 slope and a flat front profile. Unit clips directly over the wheelchair seat frame tubes, it seats the persons lower than normal for easier transfers, while still providing appropriate positioning.

Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)

Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.

Crazy Creek Chair & Power Lounger

The Crazy Creek Chair and Power Lounger are therapeutic seats designed for use by individuals who are unable to stand for long periods. The portable seats provide a padded seat and back support that can be used on the ground, boat deck, etc. They are constructed of coated 420 pack cloth, closed cell foam, fastex buckles, nylon webbing, carbon fiber stays and Neoprene. These seats can be adjusted from sitting to flat positions; they are waterproof and can be rolled or folded for carrying. Creek C

Curved Backs (Mod I)

Solid back insert modification for Freedom Design solid backs. Pressed wood with foam and upholstery. Adapts to any style hardware.

Cushion Design

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Cardboard and foam seat cushion is shaped to provide relief from pressure sores for wheelchair users. To construct cushion, cut rectangular pieces of corrugated cardboard the same size as the user's wheelchair seat upholstery. Glue enough pieces together to make a 2 inch high stack. Cut out a pressure relief hole. Dampen top layers of cardboard cushion and have user sit on them for several hours until the cushion is molded to user's buttocks. Dry the c

Cushion Stop (Model 5035)

The Cushion Stop, model 5035, is a cushion retainer designed to prevent a cushion from sticking out the back of a wheelchair. The heavy cotton duck fabric insert attaches permanently to the seat and back of the wheelchair to prevent the cushion from sliding out. Grommets in the webbing straps attach to the upholstery screws on the back and seat. SIZE: For standard adult or narrow adult wheelchair.

Cushion-It: Medical Sheepskin Wheelchair Pad

The Cushion-it: Medical Sheepskin Wheelchair Pad is a wheelchair seat cover designed for use by individuals at risk for pressure sores/ulcers. Machine washable and urine resistant, this Australian Medical Sheepskin pad can also beused as a back pad and reduces pressure and absorbs perspiration. The HiTemp UR Australian Medical Sheepskin Pads are held securely in place by straps with Velcro adjustment and closure. The leather of these sheepskins is perforated by an array of small holes to facilit

Cushions

These Activeaid Cushions are foam seat cushions for wheelchairs made of 2, 3, or 4-inch thick vinyl Staph. The cushions are check covered and made of polyurethane foam. One model has a horseshoe cutout to relieve sacral pressure. A board seat insert is optional. SIZES: Adult (16 x 18 inches) and Junior (16 x 16 inches).

Custom Adapted Footstool

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted footstool for an adult with cerebral palsy. This individual worked as a disability advocate and often spends most of her eight-hour work day at her desk. She had difficulty with her feet resting on the floor while sitting and would experience swelling and muscle spasms, particularly when she was tired. Commercially available footstools were ill suited. The custom adapted stool was created using lightweight plywood to constr

Custom Chair

CUSTOM ADAPTATION PURPOSE: To accommodate a child's disabilities to improve upper body range of motion and overall independence. The chair was built to the style of a supplied model. Features include a slightly reclined back, side panels, a drop-away pommel at the front of the seat plate, provision for fitting a pelvic positioning belt, and a footplate with footcups. TITLE: Successful Projects in Brief: Chair for Boy in Special School. JOURNAL: TAD Journal. REF: Vol 23 no 1, Autumn 2003: p.19

Custom Highchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation of a highchair for a child in a body cast who is unable to be “seated” in a conventional chair or highchair. This adaptation is can be built around any standard chair. The dimensions are determined by the child’s and the cast size as well as the chair type. The clamp arrangement in back means the adaptation is firmly held in place, yet easily removed with no permanent damage to the chair. The platform height is set so t

Custom Lumnar Pillow

This custom lumbar cushion is an especially made-to-order lumbar pillow designed to help individuals who have a disability or condition that affects their lower back. Lumbar cushions are made to support the lumbar vertebrae, L1 to L5 of the spine. Non-returnable.

Custom Recliner Trunk Controls Series 300

Custom Recliner Trunk Controls Series 300 are accessories designed for support of trunk in cases of poor lateral trunk control or scoliosis. The Trunk Control Series includes: three Scoliosis Systems: Regular and Hinged - steel reinforced with self skinning foam, washable fleece, adjustable vertically, in/out, and laterally, can be custom-made, and Bolt-on Chip - same features as Regular and Hinged system, but includes hardware attached to outside of bucket back, chest strap holds pads to indivi

Custom Seat Cushion

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to sit for longer periods. A sideways groove 1.5 inches wide was cut into a four-inch thick piece of foam exactly where the user's sitting pressure points are. To maintain the integrity of the foam, the groove starts 2 inches in from each side. A V-shaped groove was cut under the tail bone. The two grooves move sitting pressure to the fleshier parts of the legs and buttocks and alieviates direct pressure on bony area

Cylinder Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with cylindrical back and sides to provide support for the trunk and encourage the child' s shoulders forward. Chair made with wood and a cardboard cylinder. Lists materials needed and provides instructions for constructing the chair, which can be made with a removable pommel. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a Child who has a Physical Disability REF: Melbourne, Australia: Health

D-Shaped Support

The D-Shaped Support is designed for use by individuals with lumbar injuries or disabilities. Intended for use where forward leaning or movement occurs, this roll is firmer than the regular Bakrol (see entry). The roll includes a washable cotton cover with a strap and a quick-release buckle. DIMENSIONS: 12 x 4 inches.

Decubitis Pad

The Decubitis Pad is made of washable Fortrel polyester pile. DIMENSIONS: 20 x 24, 24 x 30, 30 x 40, and 30 x 60 inches.

Decubitus Pad

The Decubitus Pad is made of Fortrel polyester pile and designed for either the seat or back of a wheelchair. The pad is washable. Wheelchair accessories include back/seat cover, armrest, leg support cover, and paddle pad cover.

Decubitus Pad

Standard or heavy weight kodel pile bed pads. Washable. Sizes: 15 by 18 inches, 24 by 30 inches, 30 by 40 inches, 30 by 60 inches.

Decubitus Pad

The Decubitus Pad is designed to allow air circulation to aid in the healing of pressure sores. This pad is made of polyester fibers for softness and resiliency. DIMENSIONS: Available in a choice of 16 x 18 inches, 24 x 30 inches, 30 x 40 inches, or 30 x 60 inches.

Decubitus Pad (Models 0034 & 0036)

The Decubitus Pad is designed to protect against pressure sores. The polyester pile pad is flame retardant, washable, and autoclavable. DIMENSIONS: Model 0034 is 30 x 40 inches and model 0036 is 30 x 60 inches.

Deep U Headrest (Model Duhr100)

The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches.

Defender Ii

The Defender II is an air wheelchair cushion system designed for use by individuals who do not currently have pressure sores. The cushion's multiple air cells are divided into two zones to provide pressure relief at the boney areas of the posterior. The cushion is made of soft, durable neoprene (latex free), and comes with a machine washable, breathable cover. Each air cell is reinforced with an internal air bladder for additional durability and a foam insert to prevent bottoming out. The manu

Deluxe Gel Foam Cushion (Models 6519Sc & 6500Sc)

The Deluxe Gel Foam Cushion is a gel foam seat cushion designed for use in wheelochairs. This cushion is designed to equalize pressure and reduce soreness and features a foam-encapsulated gel bladder that will not bottom out. The standard cover is a water-repellant Staph-Chek cover with carrying handles. OPTIONS: A fleece cover is available. DIMENSIONS (WxDxH): Model 6519SC is 18 x 16 x 2 inches and model 6500SC is 20 x 18 x 2 inches.

Deluxe Lateral Arm Support (Model 6320)

The Deluxe Lateral Arm Support, model 6320, is a trunk support designed for use by wheelchair users who lean laterally. This padded trough has an ambidextrous design, enabling it to fit either wheelchair armrest. The contoured trough supports the arm and encourages arm use and rehabilitation. Optional self-releasing straps may be used to stabilize arm position. This support has a soft, water-repellent, wipe-clean vinyl cover.

Deluxe Reversible Extenda Arm (Model 31094)

The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to

Deluxe Seat Solution

The Deluxe Seat Solution is a foam seat cushion designed for use by individuals at risk for pressure sores/ulcers or who need support while seated. This cushion has an orthopedic wedge-shaped design that tilts lower back forward to restore a natural spinal curve, while a cut-away section relieves pressure on the tailbone and spine. This high-density poly/foam cushion has breathable fabric on one side and is wipe-clean and water-resistant on the other. The cushion has a built-in carrying handle.

Deluxe Wedge Cushion (Model 6535)

The Deluxe Wedge Cushion, model 6535, is a wedge foam seat cushion designed for use in wheelchairs. Made of firm, high-density foam, this cushion gently rotates the hips back to prevent forward sliding. Covered in water-repellant, wipe-clean, non-slip vinyl, the cushion has a convex bottom to provide a stable foundation and prevent seat hammocking. DIMENSIONS (WxD): 18 x 16 inches. The cushion tapers from 4 inches high in the front to 2 inches high in the back.

Deluxe Wheelchair Cushion (Models 7604, 7605, & 7606)

The Deluxe Wheelchair Cushion (Pincore Latex Style Foam) is a foam seat cushion designed for those who need a little extra support. The high density foam coare will maintain resilience and will not crack or crumble. DIMENSIONS: 16 x 18 inches, with a thickness of 2, 3 or 4 inches. COLOR: Plaid.

Deluxe Wheelchair Tray (Models H1200 & H1201)

The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.

Design A Roho Kit

Kit allows therapist to design Roho cushion fit for individual needs before ordering custom cushion. Each cushion section is 4 rows by 2 rows of air inflatable, pressure relieving cells with Velcro attached to bottom. Sections are attached to base to form desired cushion design.

Desk Arm / Large Lap Hugger (Models 6515L, & 6517)

The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.

Desk-Length Armrest (Model Ar20) And Full-Length Armrest (Ar24)

The Desk-Length Armrest (model AR20) and Full-Length Armrest (AR24) are single post armrests that come with mounting hardware and are designed for use on seating systems. They can be attached to aluminum pans to be non-removeable, removeable with fixed height, or height- adjustable with fixed lower limit. Desk-Length Armrests are 9 inches long and Full-Length are 14 inches long.

Desktop Portal Ii

The Desktop Portable II is a treatment chair designed to support the upper body for treatments by therapists in all sorts of environments. This seated support system features QuickLock angle adjustments designed for control of spinal alignment and cervical flexion. It is designed to support a wide range of body types and table heights. The chair is small, lightweight and comes with a carrying case. WEIGHT: Five pounds. WARRANTY: Five years.

Device To Enable An Individual To Feed Himself

CUSTOM ADAPTATION PURPOSE: To enable an individual with neurological disabilities to eat independently. This chair has an armrest for the user's right arm made from U-shaped PVC half-pipe.The armrest is attached to an outer sleeve that moves up and down a central steel post attached to the chair platform. A cast-iron window weight acts as a counter weight to render the user's arm weightless. A foot pedal connected to a system of pulleys and levers underneath the chair platform raises the user's

Direct Mount Clamp (Model 247-Dm100)

The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha

Doodlebug Insert (Model 1065)

The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.

Double Directional Head Switch.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Head operated switch which turns on if head is held upright and off if the head tilts too far forward or back, to encourage a child to keep her/his head in an upright position. Materials include 2 glass mercury switches, 4 feet of 2 conductor, 22 gauge stranded wire, a subminiature size plug, a strip of cardboard, soldering iron, and hot melt glue with applicator gun. Describes and diagrams construction of the switch. The switch may be attatched to the

Double Medical Sheepskin (Model 105)

The Double Medical Sheepskin, model 105, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 6 x 2.5 feet average size. COLOR: Natural.

Double Tube Lift-Off Mounting Kit (Models 3613 & 3613-01)

The Double Tube Lift-off Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Lift-Off Mounting Plate, two 90-degree Vertical Tubes, and four 2 Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Double Tube Mounting Kit (Models 3603, 3603-01)

The Double Tube Mounting Kit is designed to attach the headrest, the occipital ring, and their Interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Mounting Plate, two 90-degree Vertical Tubes, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Drop Base

The Drop Base is a ABS plastic solid seat panel with cutouts for wheelchair cross braces designed to allow the mounting of custom or commercial seat cushions level with or below seat rail level. The panel fits between the seat rails, with 1- and 2-inch drop hooks to fit 7/8-inch or 1-inch rails. DIMENSIONS: Sized to fit 16 and 18 inch widths.

Drop Brackets, Drop Hooks, & L Brackets

The Drop Brackets and Hooks are stainless steel drop hooks designed for mounting seats and backs into tubular frame bases. The "L" brackets allow angle adjustment with 1, 3, 5, or 7 holes. DIMENSIONS: 1-, 2-, and 3-inch deep Drop Hooks are available available for 7/8 or 1 inch diameter tubing, with spacers for 1/2 inch increments.

Drop Seat And Cushions (Models 6540, 654020, 6541, & 6519)

The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the

Drop Seat Base And Hardware

The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.

Drop Seats (Models 31649, 31651, 31655, & 31656)

Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1

Drop-Stop Footrest Extender /legrest Pad(Series 7032)

Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.

Durafloat Ii Cushions (01-2000 Series)

Foam seat cushion, 10 pound density. For heavy duty flotation or hard use. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Dyna Flo

Seat cushion of open cell foam, similar to T foam. Each cushion has progressive laminations of soft, medium and firm foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Dyna Gel

Seat cushion of solid, gel like foam. Specify soft or medium. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick, 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Dyna-Disc Balance Cushion

The DynaDisc is an inflatable balance cushion capable of withstanding 2000lbs/sq. inch, designed for those who require additional balance and/or trunk support. It's smooth on one side and textured with pegs on the other. Use DynaDisc seated to increase balance and muscular resistance while doing exercises, or lying to improve strength and core stabilization for floor exercises.

Dynafoam Abduction Wedge

The Dynafoam Abduction Wedge is a knee separator designed to prevent adduction contractures by maintaining four inches of knee separation. This sculptured wedge is made of high density foam with a machine washable, terry cloth cover and Velcro straps to maintain position. SIZES: Adult (no. 8481, $22.35) and Pediatric (no. 8488, $41.55) with 3 inches of abduction. COLOR: Cover is blue.

Dynafoam Knee Spreader (Models 2036 & 2047)

The Dynafoam Knee Spreader ##2036 and ##2047 is a knee separator and hip abduction splint designed to abduct the hips and to separate the knees while in sitting position. The device is made of high resiliency Dynafoam covered in a polyester slip cover that is removable for washing. Dynafoam offers therapeutic, dynamic qualities when compressed. The abductor is secured by a 4-inch wide Polynap strap with Velcro fasteners that wraps around the thighs. SIZES: Adult (##2036) and Pediatric (##2047).

Dynamic Articulating Footrest

The Dynamic Articulating Footrest is a footrest extender designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. This footrest extender allows for both extension and rotation of the footplates to mimic the motion of the knee joint and leg. It also allows for three different ranges of articulation (knee rotation): 0 degree (linear motion only), 30 degrees and 50 degrees. A shield is used to prevent pinch point

Dynamic Forehead Strap System (Model Dfs-1)

The Dynamic Forehead Strap System is a headrest accessory designed to support the head for individuals who have difficulty maintaining their head in an upright position. It is meant for use with the S.O.F.T. headrest system (see separate entry). The system consists of pulleys that allow the forehead band to move with the user, providing greater freedom of movement. The strap is designed to float about freely with the user. The straps are available in two different styles. The first features a te

E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)

The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION

E-Z-Lock Tray Clamp (Model 31096)

The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Easyriser (Model Pl24Aj)

The EasyRiser, model PL24AJ, is a foot support designed to prevent pain in the back shoulders or arms for individuals whose workstation is standing at a tall counter. There is an anti-fatigue mat that provides cushioned comfort for the feet and legs and the sturdy steel frame and legs are built for durability. The platform adjusts to put the user at the right height to reduce fatigue and back strain, and the rubber feet hold the platform in position. The foot support is large enough to move arou

Econo Flip Plevic Stabilizer (Model Ee 3E)

Abductor with a bracket that easily flips down to allow easier transfers. Bracket is a push lever and drops from the front. Always returns to the original position. Adjustable bracket. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inch

Econo Float Flotation Cushion

The Econo Float Flotation Cushion is a water filled flotation cushion consisting of five internal baffles that reduce water motion. It includes a foam pad for insulation and a repair kit. The pad shows a fill line for ease of filling. DIMENSIONS: 16 x 18 inches. WEIGHT: 12 pounds filled.

Econo-Gel Pad (Models 751150, 751151, 751154, & 751155)

The Econo-Gel Pad is a single chamber gel flotation seat cushion designed for use in wheelchairs. This cushion combines heat-dissipating and pressure-reducing gel with a foam pad. All models are factory sealed in vinyl. Models 751150 and 751151 also include a launderable fabric cover. DIMENSIONS: Models 751150 and 751154 are 16 x 16 x 2 inches and models 751151 and 751155 are 16 x 18 x 2 inches.

Economy Gel Foam Cushion (Model 6512)

The Economy Gel Foam Cushion, model 6512, is a gel and foam seat cushion designed for use in wheelchairs. This cushion helps reduce pressure and comes with a water-repellent, bacteriostatic Staph-Chek cover. DIMENSIONS (WxDxH): 18 x 16 x 2 inches. COLOR: The cover is blue.

Economy Molded Lap Tray (Model A70711)

The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate

Economy Wheelchair Belt (Model Mdt829110C)

The Economy Wheelchair Belt, model MDT829110C, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. This seatbelt restraint helps the wheelchair user to remain upright in the chair without sliding. This belt encircles the user and crosses in back. The belt is made of washable nylon and is latex-free. SIZES: One size fits all.

Econotray Series

The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com

Elasto-Gel Cast & Splint Pads

The Elasto-Gel Cast & Splint Pads are orthoses liners designed to be used under casts, splints, pressure suits and garments, masks and dressings; to stabilize braces, orthotic and prosthetic devices; as padding for the prevention and treatment of decubitus ulcers; and to protect skin grafts. The pads are made from a formulated hydrogel which contains a natural skin moisturizer/conditioner. This hydrogel has properties which allow it to absorb excess perspiration from the skin and transmit it

Elasto-Gel Seat Cushions (Models F2010, F2011, Sc3020, & Sc3021)

The Elasto-Gel Seat Cushions are flotation gel wheelchair cushions designed to reduce pressure, maintain a cool temperature, and control moisture. The cushions are constructed with a layer of soft polymer gel covered with a breathable, four-way stretch fabric. The gel is layered with a 1-inch urethane foam pad and housed in a washable, removable cover. The cushions will not leak even if punctured. The cushions have a large heat capacity and therefore a nearly constant temperature is maintained.

Elasto-Gel Torso Pad (Model T4010)

The Elasto-Gel Torso Pad, model T4010, is a flotation gel pad for use in bed or in a wheelchair. The soft, polymer gel pad has a washable, removable cover. DIMENSIONS: 24 x 30 x 3/4 inches. WEIGHT: 25 pounds.

Elderstore Deluxe Swivel Seat Cushion

The Elderstore Deluxe Swivel Seat Cushion is a cushioned seat designed to help the elderly, disabled, or others who have difficulty getting into and out of wheelchairs, cars, or any other seating situation. It swivels and allows the user to swing their legs out while remaining in a seated position. It is made of a dense foam resting upon a swivel base made of a durable plastic. The plastic base contains the swivel mechanism which uses ball-bearings and roller to achieve the 360 degree rotations.

Elderstore Extra Lightweight Folding Transport Chair

The Elderstore extra lightweight folding transport chair is designed for use by the elderly or users who have difficulty getting out of the car, a wheelchair, or any other sitting situation. Comes with a carry bag and folds up for storage. The armrests are padded for comfort and can be flipped out of the way as an option.

Elevated-Arm Lateral Support (Models 706020 & 706021)

The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.

Emove4D2 Model Em62

eMove4D2 Model EM61is an adapted office chair suitable for users with paralysis or severe muscle weakness. This adapted chair combines powered controls for mobility with the manual adjustments of an office chair. The user can adjust for best postural comfort and support. This chair is fitted with a bespoke seat pad, independent swing-out-inwards foot rests. Joystick control mounted on the left hand side. Lowered arm support height with short arm pads.

Endoflex Back

Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .

Endurance Cushion

The Endurance Cushion is an air flotation cushion designed for use by individuals at risk for pressure sores/ulcers. Designed for use in chairs or vehicle seats, this cushion has two manually inflated pressure relief zones. The cushion includes the multiple- cell, two-zone cushion, a cover, a hand pump, and a set of two straps with hooks for affixing the cushion to almost any seat. The cushion is made of heavy-gauge Polyurethane (latex free), and has a built-in carrying handle. The cover is mad

Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)

Enduroline Plus Trays (Series 31200)

The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide),

Enduroline Series

The Enduroline Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of Melamine-impregnated fiber board with a woodgrain vinyl top, and are available in tray only, tray with routed stop groove, tray with anodized aluminum rim, tray with groove and straps, and tray with rim and straps models. All models have a rectangular work surface. SIZES: All models are available in child, adult, and extra-wide sizes. DIMENSIONS (WxD): Child-size models are 20.5 x 18 inches w

Enduroline Top Drop Quik-Fit Trays (Models 33007P, 33009P, 33011P, 33019P, 33007, 33009, 33011, & 33019)

The Enduroline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The Enduroline Trays are made of melamine-impregnated fiberboard. Models 33007P, 33009P, 33013P, a

Enduroline Top Drop Quik-Fit Trays With Control Cutouts (Models 33037, 33038, 33039, 33040, 33041, 3342, 33043, 33044, 33045, 33046, 33047 & 33048)

The Enduroline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout

Ethafoam

Ethafoam is a polyethylene foam used in the underlayment of contour in seating. Foam sheets are sold 3 per case. DIMENSIONS: 2 x 24 x 3 feet.

Euroflex 700 Abc

The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.

Euroflex 700 Abc

The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.

Euroflex 700 Abc

The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.

Euroflex Classic Office Chair

The Euroflex Classic is an office chair developed for those with disabilities. Rolling wheels in combination with a flexible seat base (Flexbase) make it easy to move the chair with the feet, and transfer can be done in a safe and comfortable way. Flexbase gives stability and proper breaking. An ergonomic-shaped seat unit provides accurate seating position and comfort. The flexible adjustments in combination with a wide range of accessory options allow various individual needs to be met.

Euroflex Clinic Chair

The Euroflex Clinic is an assistive clinical chair, designed for commercial use within medical establishments. Electric powered height adjustment means that clinicians no longer have to bend and stoop whilst carrying out medical procedures. Adjustments can be made with the patient in site allowing for faster patient interaction. Because the height of the seat is so easily adjusted, practitioners will be more inclined to raise the patient rather than leaning over in uncomfortable stressful positi

Evoflex Pelvic Stabilizer

The Evoflex Pelvic Stabilizer is a wheelchair seat belt designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury and others who use wheelchairs. The Evoflex has two parts that attach to opposing sides of a wheelchair's seat. When the user is seated in the wheelchair, the two parts attach using a push button seatbelt fastener or a Rehab Latch (available only for the medium and large sizes) to secure the user in the seat. The Evoflex's parts are semi-rigid

Evolution Back

Evolution Back is a wheelchair back support system designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The system is adjustable to accommodate growth and its "slide and snap" hardware is operable with one hand. It has an oversized self-inflating cushion for immersion of bony prominences, and is designed to work with lateral supports, hip belts, and hip guides. The system includes hardware with one inch of lateral a

Evolution Back Deep

Evolution Back Deep is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. It provides full posterior support and up to seven inches of lateral support. The seat can be adjusted in depth plus or minus three inches (up to 17.5 degrees of recline), and can be adjusted laterally plus or minus one inch at four points to accommodate growth or disproportionate body types. The system includes a PSIS

Expandable Tray

The Expandable Tray is a wheelchair lap tray designed for use by individuals who use wheelchairs. The wooden surface provides a large surface support for elbows and forearms, enabling better trunk support. Available with or without mounting clamps, the tray can be used on manual or powered chairs or on standing positioners, and adjusts to various widths. When not expanded, the tray fits through doorways and aisles. SIZES: Medium or large. DIMENSIONS: Each side extension adds 4.5 inches to the wi

Express

The Express is a foam wheelchair seat cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The cushion is made of open-cell foam in two different densities, bonded together in opposing patterns to prevent the pelvis from going into a posterior tilt and sliding out of the chair. Closed-cell foam lateral pieces add increased stability or can be removed to adapt to a sling seat. The cushion comes with a front label, a nylon handl

Extension Headrest (Model 72)

The Extension Headrest, model 72, is designed for use with wheelchairs with push handles. The unit attaches to the wheelchair push handles with bracckets (included) to extend the back upholstery to form the headrest extension. DIMENSIONS: Adds 18 inches to the wheelchair back height.

Ez 2 Rest

The EZ 2 Rest pillow is a lumbar support pillow designed for use in office or car. Helps support spine and maintain good posture while seated. Includes a 4"x8" gel pack. Warm it in the microwave or chill it in the freezer then slip it in the pillow's pocket. Hot or cold therapy can help ease tension, reduce inflammation and relax muscles. Adjustable elastic strap fits around most any chair.

Ez Boost Power Seats

The EZ Boost Power Seat is a self rising seat that helps individuals who need help getting out of chairs. Self riser gently lowers or raises user and helps relieve stress and strain on joints. No batteries or electricity needed. Foam filling provides seated comfort. Handle makes it easy to move from chair to chair or take when traveling.

Fastback

The Fastback is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. This air and foam flotation cushion is comprised of three densities of foam, positioned according to density to provide mild lateral support, scapular contour, and vertebral comfort and pressure relief. A valve allows the user to release more air for greater envelopment and stability. Other features include a PSIS block for l

Feeder Board Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Attachment for a wheelchair laptray, used to stabilize dishes and glasses for a user who lacks coordination. The feeder board clamps on top of a regular laptray with medium size C clamps. The dishes, cups and glasses the person uses fit into cutout holes in the board. Topview and sideview diagrams included. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Insti

Feet-Shaped Steppers

Feet-shaped steppers are shaped like two giant feet and designed for use by individuals who need a foot fidget area under their desk at school or work or for users who need sensory breaks. It is a versatile therapy tool, as it can also be used for bilateral coordination and integration, balance training, vestibular and proprioceptive input.

Fellowes Compact Foot Rocker

Fellowes® Compact Foot Rocker is foot support designed for use by individuals with mobility disabilities, lower back pain or poor circulation. This ergonomic foot rests' rocking motions helps to improve circulation and reduce fatigue. The compact design suits areas with restricted work space. Flip product over to adjust height - range is 2-3/4" to 4”.

Figure-8 Clamp (Models 32310 & 32310B)

The Figure-8 Clamp is a seating hardware and a mounting clamp for accessories designed for use with wheelchairs. The two-part clamp is used to attach controls, accessories, and other devices to wheelchairs. One side of the clamp accommodates .75-inch tubing and the other side accommodates 7/8 inch tubing. Deep-set cap screws are used to tighten clamp around tubing. Set screws can provide additional mounting stability. COLOR: Model 32310B comes in black. WARRANTY: The manufacturer warrants this p

First Class Chair (Models Fc 2000 & Fc 4000)

The First Class Chair is a youth positioning chair designed for use with children with physical and neurological disabilities. Designed to promote good feet-on-the-floor posture, this vinyl-upholstered chair is equipped with a pelvic strap and has a height- and depth-adjustable seat with up to 15 degrees of tilt. Each armrest is independently height-adjustable and they swing to the side for ease in transfer and positioning. OPTIONS: Adduction pads; headrest; and an accessory kit with a trunk har

Fitball Seating Disc

The FitBall Seating Disc allows users to ease back pain while maintaining a correct body posture.

Fixed Arm Troughs (Models 31339R, 31339L, 32339R, & 32339L)

The Fixed Arm Troughs are designed for use by individuals who use wheelchairs and have upper extremity disabilities. Available for the right or left arm, these troughs are made of heavy-duty plastic and are equipped with brackets that slide over the existing armpads. Models 31339R and 31339L are padded with Ensolite and models 32339R and 32339L are padded with imitation lambskin. COLOR: The troughs and the Ensolite padding are black. The imitation lambskin padding is natural.

Fixed Drop Lock, Swing-Away Drop Lock, & Drop Stop

The Fixed and Swing-Away Drop Locks are stainless steel hardware designed for stabilizing seats and backs mounted on tubular frames with drop hooks (see separate entry). The locks will fit 7/8 and 1 inch diameter tubing. Three styles are available: the Drop Stop with no tab, Swing-away Drop Lock with pivoting tab, and Drop Lock tab with fixed tab.

Fixed-Drop Hardware Kits (Models 32617H, 32618H, 32542H, 32603H, 32604H & 32543H)

Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.

Flat Foot Rest With Heel Straps

One pair of custom size slotted Kydex foot rest plates with mounting hardware and velcro heel straps. Mount to existing wheelchair footplates to increase foot placement area. Slotted for forward and back adjustment on footplate.

Flat Top Lateral Roll Armrest

The Flat Top Lateral Roll Armrest is an add-on armrest designed for use by individuals who use wheelchairs. This armrest fits over the existing armrest and the wide foam top provides comfort for the arm while discouraging lateral leaning. The design prevents spinning of the support around the armrest and prevents shoulder elevation. A low-profile model fits hemi wheelchairs and those that have less than three inches of clearance between the top of the finger guard and the bottom of the armrest.

Flip Abductor (Model Ab20)

The Flip Abductor (model AB20) is a knee separator designed for seating systems and wheelchairs. It is a lever release flip-down abductor with an adjustable height of 1 to 4 inches. An Abductor Pad (model AB50, $60) can be ordered separately. The Abductor is 3 inches by 5 inches by 3 inches, and comes in black only.

Flip Away Half Lap Tray (A7079, A70710, A70712 & A70713)

The Flip Away Half Lap Trays, models A707-9, A70710, A70712 and A70713, are lapboards designed for use by individuals who use wheelchairs. The easy-to-clean plastic trays secure on either the right or left side of a full-length or desk-style upholstered wheelchair arm. These trays offer comfortable support and lift up and out of the way during patient transfers or wheelchair storage. DIMENSIONS (WxD): 13 x 21 inches with a one-inch molded rim and 3.5 inch diameter recessed area for cup or glas

Flip Down Kit With Abductor Pad (Models 31468S, 31468M, & 31468L)

The Flip Down Kit With Abductor Pad is seating hardware general and an abductor pad designed to aid in positioning individuals who use wheelchairs. This kit includes an abductor pad, one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge with push-button release, and mounting hardware. The Abductor Pad is made of textured urethane self-skinning foam and come with 10-32 T-nuts embedded in all m

Flip-Up Armrest

The Flip-Up Armrest is an elevating armrest designed to be attached to 7/8 inch tubing back uprights or to a back insert. The armrests have adjustability in height and angle and swing up for transfers. The armrests do not include pads.

Flip2Sit

The Flip2Sit is a youth positioning chair designed for use by children with neurological or physical disabilities. This chair provides stable support while the child is sitting at the table and as a positioning seat for play once the removable back is detached and the chair is flipped over. The contoured latex-free seat is designed to help improve posture, sitting balance, and other functional abilities. Features include a two-way belt for extra hip stability, anti-slip pads to reduce movement,

Floor Seat

ABS plastic seat ($202) and back are vacuum-formed separately and assembled to suit child. Unit sits directly on floor, with child long-sitting. Leg abduction support wings are attached to slots in base to allow adjustment of position. Available in one size for children about one to five years of age. Can be ordered with higher back, head support, seat belt or chest belt, knee straps, toy bar, or padded seat and back covers. ABS table ($180) with chromed steel frame adjusts from 9 to 11 inches i

Floor Seat And Corner Seat.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rustic aids are simple aids meant for outdoor use. Simple chairs or back rests for person sitting on the ground. Instructions for a simple floor seat or corner chair for use when sitting on the ground. Drive stakes with points into the ground side by side in a pattern of a square or triangle with a 90 degree angle. The front stakes should be lower to allow movement of the arms. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Caston, D. TITLE: Eas

Floor Seat.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Legless seat with sides to allow a child with poor body support to sit on the floor to play with other children. Instructions for building a seat, made of plywood, with sides to help support a child. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 30-31. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL NUMBER: R1798 PAGES (i

Floor Sitter

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with floor-level seating and positioning. The legs were cut off commercial plastic children's chairs and the edges smoothed. Four wooden holding blocks were glued to the underside of the chair and the chair was mounted to a hoop pine plywood base by screwing through the base into the holding blocks. An adjustable pelvic belt was fitted to the chair, using stainless steel bolts to attach it to the base. A slot was cut in th

Floor Sitter (Models 7Flosc & 7Flosj)

The Foor Sitter is designed for use with children with balance, neurological, and physical disabilities. This lightweight, wipe clean plastic seat is designed to provide very firm back and lateral support and has an integrated gently molded pommel. SIZES: Child, model 7FLOSC, and junior, model FLOSJ. DIMENSIONS: The child's model accommodate 7 inch hips and is 9 inches from front to back. The back height is 7 inches. The junior model accommodates 10 inch hips and is 13 inches from front to back.

Flotation Cushion (Model 7019)

The Flotation Cushion, model 7019, is a water flotation seat cushion designed to alleviate pressure for individuals who spend most of their time in a seated position. The cushion is filled with a low viscosity water based gel enclosed in a heat sealed heavy gauge vinyl. The cotton cover has handles and a zipper for removal and cleaning. DIMENSIONS: 16 x 18 x 2 inches. COLOR: Dark Blue.

Foam Cushion Wedge And Flipdown Hardware

Abductor pad available in 2 sizes: 3 1/2 inches wide by 3 inches high by 5 inches deep, and 2 inches wide by 3 inches high by 3 1/2 inches deep. Mounts to underside of solid seat with flipdown or slide-out hardware to allow transfers.

Foam Donuts (Models N8001, N8002, N8004, & N8008)

Foam Donuts are foam ring seat cushions designed for use by individuals at risk for pressure sores/ulcers. Models N8004, N8002, and N8008 are made of molded foam and model N8001 is made of convoluted foam. A cotton cover is included with all models. DIMENSIONS: Model N8004 is 14 inches in diameter, model N8008 is 18 inches in diameter, and models N8002 and N8001 are 16 inches in diameter. COLOR: The cover is light blue.

Foam Invalid Cushion

The Foam Invalid Cushion is a foam ring seat cushion designed for use by individuals with pressure sores. This foam cushion conforms to the natural body contours of the user. Its removeable cover is machine washable and wrinkle resistant. The cover material is 50 percent cotton and 50 percent polyester. DIMENSIONS: 12.5 x 16 x 2.75 inches.

Foam Invalid Cushion (Model 6233)

Puncture proof foam ring cushion. DIMENSIONS: 13 x 17 inches.

Foam Mattress Wedge (Models 8026Ac, 8027Ac, & 8028Ac)

The Foam Mattress Wedge is a wedge foam seat cushion designed for head, back, foot or leg elevation. The wedge is non-allergenic and covered with non-plasticized, water-repellent A.C.A. Hospital ticking. DIMENSIONS: 26 x 24 inches, 7 1/2, 10 1/2 or 12 1/2 inches high.

Foam Ring Cushion (Models 6331 & 6332)

The Foam Ring Cushion is a molded foam ring seat cushion. The cushion conforms to body contours and has a removable washable dacron cotton cover. DIMENSIONS: 16 x 14 x 2 inches (6331) or 18 x 15 x 2 inches (6332).

Foam Wheelchair Cushion (Model 6227)

Foam wheelchair cushion fits all standard adult wheelchairs. 16 by 18 inches, 2 inches thick. Washable plaid cover.

Foam Wheelchair Cushion (Models 6476 Thru 6484)

The Foam Wheelchair Cushion is a foam seat cushion designed for the comfort of individuals who use wheelchairs. The cushion is made of firm polyfoam. OPTIONS: Brown polyester/cotton fabric covers with Velcro closure available (5104-5112). DIMENSIONS: 16 x 16 inches, 16 x 18 inches, or 18 x 18 inches and 2, 3 or 4 inch thicknesses.

Foot Bracket Platforms

Several styles of platforms mount to wheelchair footplates for foot positioning. Complete assembly includes one pair of bent slotted plastic platforms, two pairs of plastic side plates which mount to footplate, one pair of heel plates or stops, and one pair of velcro foot straps. Adjustable in height, depth, and angle. Available in small (3 inches wide) and medium (4 inches wide) sizes. May be ordered as complete assemblies or individual replacement parts.

Foot Hugger (Models 6351, 6352, 6353, & 6354)

The Foot Hugger is a legrest panel designed to prevent the wheelchair user's feet from sliding off the foot plates. This foam-cushioned panel is covered in wipe-clean vinyl. This unit protects the user's legs and includes an attached extender to raise the height of the foot plates. DIMENSIONS: All models fit 18-inch wide chairs. Model 6351 is one inch high, model 6352 is two inches high, model 6353 is three inches high, and model 6354 is four inches high.

Foot Machine

The Foot Machine is a foot support designed for use by individuals with mobility disabilities, lower back pain, or poor circulation. This ergonomic foot machine actss as a footrest to provide support for the legs and relieve pressure on the lower back. Features include ball bearing rollers that encourages rocking of the feet in the same way a rocking chair encourages motion, nylon wheels, a non-skid surface, and a powder-coated steel frame with rubber rests. The non-skid surface allows the foot

Foot Rest Boxes.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Boxes to attach to standard wheelchair footplates to maintain position of feet. Design for making wooden boxes to maintain child's feet on wheelchair footplates. Includes materials list and diagrams. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy to Make Aids for Your Handicapped Child REF: Book: Human Horizons Series, p 126. Also available from Prentice- Hall, Englewood Cliffs, NJ. NARIC CALL NUMBER: R1798. 1981.

Foot Support For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to have leg support in a wheelchair without creating pressure beyond the ankle. This device replicates a home footstool with the length reduced so only the ankle comes in contact with it. The unit attaches to the existing front rigging of the wheelchair and can be removed when not in use. TITLE: Wheeling Easy. JOURNAL: TAD Journal. REF: Vol. 12 no. 1, Autumn 2001: p. 16. PAGES (including cover): 2 2001.

Footboard And Brackets

One-piece ABS plastic footboard ($64). 3 sizes, 10 to 14 inches wide by 6 to 9 inches deep. Brackets ($47) attach footboard to bottom of solid seat insert. 2 size ranges, 6 to 9 inches long and 9 to 12 inches long.

Footrest Platform Tops And Bottoms

Top and bottom sections allow mounting of one-piece footplates to aluminum pans or other rigid seat panels. Removeable. Fixed or adjustable knee and ankle angles. X-style foot straps.

Footrest Receptacle And Pads

The Footrest Receptacle and Pads is a foot support made of a vacuum formed plastic shell covered with molded foam, and mounts to a standard wheelchair footrest or Otto Bock Fullcare Orthotic Seating or MOSS II systems. Each footrest receptacle ($83.75) and pad ($50.25) is ordered separately. DIMENSIONS (HxWxL): Large is 13 x 10 x 6 inches; Medium is 10 x 10 x 5 inches (outside dimensions). COLOR: Black and grey.

Footrest, Swing Tube, & Bracket

The Footrest Swing Tube and Bracket is a one piece footboard which mounts to the insert bottom to support the feet and allow the seat and footplate to move as one. Knee flexion angle may be varied from 45 to 180 degrees with mounting hardware. The Seat Mount Footrest (model 33400, $156) is made of metal. The Footrest Swing Tube (model 33422, $36) provides for the use of independent footrests and legrest cradels and still allows for insert mounting. The Pivot Bracket (model 33420, $48), Swing Tub

Footsierest

The FootsieRest is a footrest for a car seat designed for use by children with lower extremity disabilities. This footrest unit fits in the seat of most forward-facing car seats and hangs don beyond the front of the seat, providing support for the thighs, calves, and feet. This removable support is held in place by the weight of the child and the nylon cover is washable. CAPACITY: 50 pounds. COLOR: Cobalt blue, chocolate brown, or forest green.

Formfloat Ii Cushions (01-9000 Series)

3 layered foam seat cushion. Top layer is Dyna Flow foam, an open cell foam. Middle layer is High Density foam, and base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Front Mount Height Adjustment Headrest Bracket And Pads

Three custom size pads mounted on angled Kydex bracket which slips over top of tall solid back. Mounting knob in solid back secures headrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit ($140), or bracket ($40) or pads may be ordered separately.

Fsa 4D Pressure Mapping System For Wheelchair Seating

The FSA (Force Sensing Array) 4D Pressure Mapping System for Wheelchair Seating is a pressure evaluation system designed for use in positioning and cushion assessments for wheelchair users. This system allows the clinician to assess surface interface pressure between the client and a wheelchair sear or back cushion; select an optimal cushion; determine an optimal positioning strategy; document the solution; and share the pressure profile with the client and colleagues. The system includes a pres

Full Body Support Cushion

The full body support cushion is a lumbar support cushion. Allows user to sit in a natural, relaxed position. The back flexes from flat to upright to conform to furniture angles.Reduces strain on the lower back, pelvis and spine. Discourages slouching. Strap adjusts for use in a chair or car seat. Lightweight and easy to transport.

Functional Forms Wheelchair Easel / Lap Tray

The Functional Forms Wheelchair Easel/Lap Tray is designed to provide a lightweight alternative to traditional lap trays for wheelchair users. Features include a built-in 20-degree angle, pencil holder/wrist rest, removable carrying strap, magnetic paper holder, and a hidden zippered pouch. This easel also has a water-resistant vinyl or leather covering. WEIGHT: 1 pound.

G-100+ Custom Built Cushion

The G-100+ Custom Built Cushion is an alternating air pressure flotation seat cushion designed to prevent pressure sores for people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. This system features computer controlled pressure management that increases and decreases air pressure in the cushion as needed. Each cushion is custom built to fit the user and wheelchair. POWER: Uses rechargeable nickel metal hydride batteries with a life expectancy

G5 Custom Built Cushion

The G-5 Custom Built Cushion is an alternating air pressure flotation seat cushion designed to prevent pressure sores for people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. This system features computer controlled pressure management that increases and decreases air pressure in the cushion as needed. Each cushion is custom built to fit the user and wheelchair. POWER: Uses rechargeable battery with 70 to 80 hours running time and 12 to 20 hou

Gel And Foam Wheelchair Cushion

The Gel-Foam Wheelchair Cushion is a gel flotation seat cushion designed for use in wheelchairs. This two-chamber cushion combines a top layer of gel with a bottom layer of foam for maximum weight distribution and stability. The included cover is machine washable. DIMENSIONS: 16 x 18 x 2 inches.

Gel Bunion Toe Spreader

The Gel bunion toe spreader is designed for individuals who need bunion relief. This product eases pain, reduces joint pressure and properly aligns toes. Protects the big toe from friction. Gel slowly releases medical grade mineral oil to protect skin. Fits the big toe on your right or left foot. Hand wash. Air dry completely before next use. Sprinkle with talcum powder if gel becomes tacky.

Gel Callus Cushions

The Gel Callus Cushions are designed to bring relief to individuals with foot calluses and metatarsalgia. The polymer cushioned adhesive patch, will stick to the bottom of the user’s foot, covering the callous or the tender area. Reusable—users rinse (cold water) and let it air dry. Two cushions per box.

Gel Cushion

The Gel Cushion is a gel and foam seat cushion designed for use by individuals who use wheelchairs and others who are seated for long periods. This cushion has a liquid gel-filled core encased between two layers of high-density foam. A removable, washable polyester fabric cover with a synthetic sheepskin top is included. DIMENSIONS (WxDxH): 18.5 x 16 x 4 inches.

Gel Cushions (Models D4001 & D 4002)

The Gel Cushions are gel and foam seat cushions designed for use in wheelchairs. This cushion features a gel bladder filled with 3.5 quarts of aqueous, nontoxic gel enclosed in fire-retardant polyurethane foam. Both models come with a zippered cover with carrying handles. Model D4001 has a knit cover and model D4002 has an incontinent cover. DIMENSIONS: 17 x 17 inches.

Gel Flotation Seat Cushion

Cushion is fabricated of a silicon gel material designed to simulate body fat tissue. It measures 16 inches by 16 inches by 1 1/2 inches and weighs 16 pounds. An elastic knit cover is provided. The silicon is encased in a latex sealed envelope.

Gel Pads & Larger Gel Pads

Gel Pads are gel flotation seat cushions designed to be used as a top layer on another cushion, on chairs and other furniture, or on car seats. This solid gel pad is highly durable, pliable, and waterproof. The pad is defused with air and covered with Duraflex plastic, offering a waterproof layer that gives under pressure. The pad itself offers excellent slide capability, creating less friction against the skin, and conforming to body contours to provide maximum relief from pressure sores. This

Gel Top Seat Cushion

The Gel Top Seat Cushion is a gel flotation seat cushion designed to provide pressure production for people who use wheelchairs. This cushion consists of a gel pad on a high-density foam base. A fluidproof, bacteria-resistant, antistatic cover is included. DIMENSIONS: Available in 16 x 16 inches or 16 x 18 inches.

Gel Wheelchair Cushion (Model Msc263105)

The Gel Wheelchair Cushion, model MSC263105, is a gel flotation cushion designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. This latex-free cushion fits most standard wheelchairs and provides pressure relief for all-day sitting by distributing the user's body weight evenly. The gel is similar in consistency to adipose tissue (fat layers). The cushion is durable and washable, and because the gel is very thick, there is minimal leakage even if the c

Gel-Eeze Wheelchair Contour Cushion

The Gel-eeze Wheelchair Contour Cushion is a gel and foam seat cushion designed for use in wheelchairs.Constructed of a layer of gel in a bladder sandwiched between two layers of foam, this cushion has a contoured top for better weight distribution and a center pommel and hip adductors for positioning assistance. The cushion comes with a wipe-clean cover. DIMENSIONS (HxWxD): 2 x 18 x 16 inches. WEIGHT: Four pounds. COLOR: Black.

Gel-Foam Pad (Models 751010, 751011, & 751012)

The Gel-Foam Pad is a gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. DIMENSIONS: Model 751010 is 16 x 16 x 2.5 inches; model 751011 is 16 x 18 x 2.5 inches; model 751012 is 16 x 20 x 2.5 inches.

Gel-Foam Thin-Line Pad (Models 751040 & 751045)

The Gel-Foam Thin-Line Pad is a lightweight gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. Model 751040 is a standard cushion and model 701045 has a firm foundation. DIMENSIONS: Model 751040 is 16 x 18 x 1.

Gel-T

The Gel-T is a gel and foam seat cushion designed for geri chair and wheelchair users who are at moderate risk of pressure sores. This cushion features a segmented gel-filled bladder between two soft foam layers. A wipe-clean vinyl cover is included. DIMENSIONS (WxLxH): 15 x 15 x 2 inches, 17 x 17 x 2 inches, 19 x 19 x 2 inches or 21 x 21 x 2 inches.

Geo-Matt Contour

The Geo-Matt Contour is a foam seat cushion designed for wheelchair users who are at moderate risk of pressure sores. This cushion features the Geo-Matt design with more than 800 cells to respond independently to absorb pressure and minimize shearing plus ischial/coccygeal bucketing, contoured leg channels, and a center abductor. The cushion is encased in a wipe-clean Durafilm incontinence-proof coating. The cushion is available without a cover or with a choice of a vinyl facility cover with a n

Geo-Matt Prt

The Geo-Matt PRT Is a foam seat cushion designed for use by active wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. A modification of the Geo-Matt design for this cushion creates a lower, firmer base than the Geo-Matt Therapeutic Seat Cushion (see separate entry)

Geo-Matt Therapeutic Seat Cushion

The Geo-Matt Therapeutic Seat Cushion is a foam seat cushion designed for use by wheelchair users at low risk for pressure ulcers. This cushion features a top surface cut into a grid pattern. The individually-responsive cells reduce shearing and cradle bony prominences. Air pockets between cells create a Ring-of Air design to prevent heat and moisture build-up. The cushion is available without a cover, with a Soft Skin moisture barrier, with a fire-retardant Soft Skin, or with a vinyl and nylon

Gerimate Bolster

The Gerimate Bolster is a back support cushion designed to offer support and comfort for persons using Geri-chairs. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.

Grow With Me Chair

The Grow With Me Chair is a straddle chair designed for use by children with neurological or physical disabilities. This chair with footplate offers height and depth adjustments to accommodate the child's stages of growth from infancy through young adulthood. The chair can be used at any standard-height table and each chair includes a three-point pelvic seatbelt for ages 12 months to small adult. OPTIONS: Padded seat and back cushion, grab bar, and wooden activity tray. DIMENSIONS (HxDxW): 33 x

Growth Guidance Systems (Ggs)

Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt.

Growth Links & Dial Links (Model Gl01 Through Gl06 & Gl10)

Growth Links (Model GL01 thru GL06) and Dial Links (GL10) are hardware designed for attaching seats and backs. They are designed to be used with aluminum pans, but Wood Adaptors (Model GL21, $40/pair) are available for mounting to wooden panels. The links come in pairs and have adjustable angles. Growth links are to be used when back is supported by separate frame. Dial links support back independently.

Gseat

The GSeat is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities. The GSeat is made with visco-elastic gel layered over dense memory foam which maintains its shape and cushioning properties. Features include a functional design to disperse pressure and improve the level of comfort to the user when seated. It also features a center relief groove that eliminates soft tissue compre

Gseat Lite

The GSeat Lite is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities. Ergonomically designed for travel and recreation, the GSeat Lite is lightweight and is made with visco-elastic gel layered over dense memory foam which maintains its shape and cushioning properties. Features include a functional design to disperse pressure and improve the level of comfort to the user when sea

Gull Wing Knee Separator (Model 703077)

The Gull Wing Knee Separator, model 703077, is a knee separator designed for use by individuals who use wheelchairs. This durable plastic frame holds the knees in abduction and interior foam padding provides comfort. Velcro straps adjust for each leg and keep the device securely in position. The frame can be adjusted using a heat gun.

Half Pad (Models 1320-01, -21, -31,-32, -33, 1330-01, -21, -31, -32, & -33)

The Half Pad is a torso support designed for use by individuals with severe phnysical disabilities or spinal cord injury while in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Half Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the wheelchair. The recess is placed vertically to the side of the pad. The Trunk Pad has padding and is available covered with a variety of upholstery. OPTIONS: Avail

Halo Strap

Soft velcro strap with mounting hardware and D-ring closure. Mounts to headrest system by attaching to lateral headrest pads. Cloth lining available on request.

Handy Lap Tray

The Handy Lap Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities. Designed to rest securely on the user’s lap, this tray features different sized and shaped spaces and pockets for organizing food or activities when seated in a wheelchair or a chair. Other features include end stands that hug the legs to help secure the tray and give the user a stable working surface. COLOR: Gray.

Hat Holder Head Support

---- DO IT YOURSELF ENTRY --------- PURPOSE: To provide a do-it-yourself solution for a young lady with head mobility issues to keep her head from falling forward while communicating and/or eating. A sturdy post was attached to the back of the young lady’s wheelchair. Various hats, headbands, etc. were modified by adding a string and hook. The string and hook are attached to the post on the back of the wheelchair keeping the young lady’s head upright. TITLE: The Hat Holder. WEBSITE: Workshop S

Head Control Switch

The Head Control Switch is a head position switch designed for use by children and adults with disabilities. The switch is activated by being tilted and can be mounted on the head or another body part.

Head Pod

The Head Pod is a head and neck support system designed for children with inadequate head control with combined hypotonia of the neck and trunk. Straps fitted around the user's head are connected to a support over the user's head which is attached to the rear of the user's wheelchair. Users who benefit from the Headpod include children ages 2-12 years old who are unable to sustain the weight of their own head due to neck weakness, provided that there is no high extensor tone in the trunk or sign

Head Rest Supports (Models 430C1, 430C2, 430H1, 430H10, 430N1 Series)

The Head Rest Supports are headrests and neckrests made from molded, contoured foam, and reinforced with flexible steel. They are available in large headrest, small headrest, combination headrest and neckrest, large neckrest, small neckrest, and lateral control. They can be modified as needed by bending the steel insert to the desired shape.

Head Stabilizer

The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, b

Head Support

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with neurological disabilities to hold his head erect. A mold of the user's back was made of forming plastic and lined with 3/8-inch foam. The support is held in place with two-inch Velcro strapping. An upright rod made of 3/8 x 2 inch Lexan plastic (for stiffness) was attached to the top of the back piece. A padded, flexible head band made of 1/16 x 1.25 inch Lexan was attached to the top of the upright rod. Also, as an alternative to th

Head Support

The Head Support is a head positioner designed to disperse pressure on the head for individuals who must remain in a lateral or supine position for extended periods. The concave support features a triangular cut-out in the center to float the ear when the user is in a lateral position or the back of the head when supine. This support is available in a choice of economy or standard density.

Head Support System (Models Plush-1 & Plush-2)

The Head Support System, models PLUSH-1 and PLUSH-2, is designed to provide comfort and support for individuals who have difficulty holding their head in an upright position. The base is a durable metal panel which is padded with two layers of foam that makes them feel as soft as pillows. They are covered in zippered Darlexx fabric and are easy to remove for washing. This head support system comes with a choice of hardware: swingaway mounting hardware; detachable hardware; fixed mounting hardwar

Head-Mount For Chin Switch

--- "DO IT YOURSELF" ENTRY ------- A thermoplastic “hat” with an attached wire which is bent down around the face and under the chin. The switch is attached with Velcro to a small thermoplastic square at the end of the wire under the chin. PURPOSE: To stabilize a switch for activation using jaw movements. MATERIALS USED: Low temperature thermoplastic material, 18 inch x 6 inch sheet, preferably colored, stiff wire, such as hanger wire, about 20 inch long, plastic welder glue, pressure-sensitive

Headrest / Neckrest Hardware: Hardback Headrest Hardware (Models 430F7, 430F2, 430F6, & 430F5) & Sling Back Hardware (Model 446K1)

The Headrest and Neckrest Hardware, consisting of Hardback Headrest Hardware and the Sling Back Hardware, is a support system designed to attach Otto Bock headrests and neckrests to the back of a wheelchair. Model 430F7 has two ball joints for multi directional adjustability, including horizontal and vertical planes, for hard or rigid seat backs. Model 446K1 has attachment hardware for wheelchair frame of sling backs.

Headrest Hardware (100 Series)

The Headrest Hardware, series 100, is seating hardware designed for use on wheelchairs. Each hardware kit includes link hardware and offers a wide range of adjustment. This hardware offers five points of adjustability. COLOR: All hardware is black chromed and anodized.

Headrest Pads

The Headrest Pads are headrest accessories designed for use on wheelchairs. These pads are composed of a steel insert with self-skinning polyurethane. These pads are designed to attach to a one-inch ball. SIZES: Small, medium, oe large.

Headrest, Large & Small (Models 1450, 1451-01, -21, -31, -32, -33, 1460, 1461-01, -21, -31, -32, -33)

The Headrests are designed for use with wheelchairs. Made of 16- gauge steel, they are plated to resist corrosion and have a recess in the center for two rows of ##10-32 press nuts. Both ends are contoured. The headrests are deburred for a smooth surface. OPTIONS: Available in metal only or with padding of 1 inch open cell foam, 3/8 inch closed-cell foam, and a cover. Covers are available in Terry, Lycra, and Heavy Weight Nylon. COLORS: Black, blue and red.

Headrest, Pad & Bracket

Headrest ($58.65 to 53.35). Easily removed pad has curved plastic base in 3 sizes. 1/2 inch foam cushioning, vinyl covered. Mounts to solid back insert with bracket ($108.35) which allows height, lateral and angle adjustments. 2 to 4 inches high, 5 to 9 inches wide.

Headsup Flexible Head Support System

HeadsUp is a head support designed for use by children and adults with neurological or severe physical disabilities or spinal cord injury. This support consists of a hat and flexible elastic bands that fasten around a wheelchair headrest or high seat or chair back to hold the head up. Each side adjusts independently from the other, creating the ability to apply the desired amount of tension. As the elastic stretches, it allows a full range of motion;as the elastic stretches, the resistance incre

Headswitch (Model 705)

The Head Switch is a touch switch that can activated with various body parts for individuals with physical disabilities. The switch requires very little pressure and so can be used by the head, knee, elbow, cheek, etc. Contact manufacturer for information on switch mounting kits (not included). DIMENSIONS: The length is 3.75 inches.

Headwing Headrest

Two custom size pads, mounted to each side of tall solid back or splitback with angled Kydex brackets for lateral head support. Brackets slotted for adjustment of width. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately.

Healthy Back Deluxe Lumbar Support

The Healthy Back Deluxe Lumbar Support is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Designed to provide support to the lumbar area and spinal column, this cushion is made of a 100-percent molded open-cell memory foam that molds to individual body curves and contours. Other features include a hugging wing-like design that provides added comfort and stability. The cushion can be used fo

Heathfield Chair With Adjustable Arms (Models 6901, 6902, 6903, 6904, 6905, & 6906)

The Heathfield Chair with Adjustable Arms, models 6901, 6902, 6903, 6904, 6905, and 6906, is an adjustable child's posture chair designed for home or classroom use by children with physical or neurological disabilities. This chair is designed for good postural sitting with minimum support. It is a low chair with a choice of feet on the floor, dolly, footrest, or footplate configuration. The legs and arms can be adjusted independently. The seat height and depth are also adjustable. The chair is a

Heathfield Chair With Fixed Carver Arms (Models 6911, 6912, 6913, 6914, 6915, & 6916)

The Heathfield Chair with Fixed Carver Arms, models 6911, 6912, 6913, 6914, 6915, and 6916, is a child's posture chair designed for home or classroom use by children with neurological or physical disabilities. This low chair has a contoured seat and buckle strap for good postural sitting with minimum support. It is available in feet on the floor, dolly, footrest, or footplate configuraton. OPTIONS: Flat seat; Velcro strap; tray; footrest; footplate; dolly (mobile base) with 75-millimeter locking

Height Adjustable (Splitback) Headrest

Custom size pad and slotted aluminum bar mounts to shoulder height solid back with knob for easy removal and height adjustment. Pad is 1/2 inch thick medium density foam over 1/2 inch birch plywood. .

Hi D Laminate Cushions (01-8000 Series)

Two layered foam seat cushion. Top inch is high density foam, base is Tufloat foam. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 16 by 18 inches by 2, 3 or 4 inches thick. 140 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Hi Density Foam Cushion

Hi Density Foam Cushions are foat seat cushions layered in 1-inch thick segments with a knit cover. DIMENSIONS: 16 x 18 inches with thicknesses of 1, 2, 3, or 4 inches.

High Back Mobile Chair (Models R6321, R632, & R633)

The High Back Mobile Chair is a positioning chair designed for use by individuals with severe physical or neurological disabilities who require upper body support. The chair includes the mobile chair frame, a high backrest with push handle, pads, armrests, and footboard and sandals. The seat is available with a choice of seat tilt or seat spring action. The seat and backrest are contoured and padded, and a hip strap clips into the chair in a variety of positions to meet user needs. The armrests

High Density Cushions (01-4000 Series)

High density foam seat cushion for medium flotation. Sizes: 16 by 16 inches by 2, 3 or 4 inches thick; 18 by 16 inches by 2, 3, or 4 inches thick. 70 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

High Density Foam (Model 180)

High Density Foam, no. 180, is a firm, open-cell, ester-type polyurethane foam material designed for cushions needing pressure relieving cutouts. DIMENSIONS: 1 x 16 x 18 inches.

High Seat Cushion (Model 16H020)

The High Seat Cushion, model 16H020, is a foam seat cushion designed for use by individuals with lower extremity disabilities. This cushion has a vinyl cover with a wood base. It is designed to take the stress off legs and knees by elevating seating levels when customary furniture heights are too low. It comes with an over the shoulder strap for carrying. DIMENSIONS (HxLxW): 16 x 16 x 4 inches.

High Seat Cushion (Model F76666)

The High Seat Cushion, model F76666, is a foam seat cushion designed to take stress off the legs and knees by raising the seat to a comfortable level. The cushion is made of firm, 6-inch thick polyurethane foam, and comes with a denim cover with a cloth handle and zipper for removal. DIMENSIONS: 15 x 15 inches.

High-Low Chair

The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-line

Hip Belt

Black nylon webbing belt, padded or nonpadded. 72 inches long by 1, 1 1/ 2, or 2 inches wide. Side release, pushbutton, or lever release buckles. Mounting bands to fit 7/8 or 1 inch tubing available.

Hip Belts (Model Ee 3C/103-5000)

Wheelchair seat belt. Nylin webbing and plastic delrin buckle. Has a pair of iliac crest relief pads so that the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.

Hip Strap

Velcro strap with mounting hardware and D-ring or buckle closure. Mounts to back of solid back or underside of solid seat.

Hip Supports, Pads, And Brackets

Hip pads are custom sized, 1/2 inch thick medium density foam over 1/2 inch birch plywood. Can be mounted inside armrests, or to seat with custom bent Kydex or aluminum brackets and bolts through threaded wood inserts.

Hollowcore Fiber Fill Geri Chair Liner (Model Vm-6625)

The Hollowcore Fiber Geri Chair Liner, model VM-6625, is full length cushion for the Geri-Chair (see separate record) designed to help prevent pressure ulcers for individuals with mobility disabilities and who spend extended periods of time sitting. This full length fiber chair liner features an incontinence cover on the reverse side to avoid leakage. The liner is lightweight and designed to resist matting by allowing air circulation. It has an extended leg area that fits most Geri-Chairs.

Hollowcore Fiber Fill Wheelchair Pad (Model Vm-6610)

The Hollowcore Fiber Fill Wheelchair Pad, model VM6610, is a decubitus pad designed for individuals who use wheelchairs or sit for extended periods of time in regular chairs. Designed to help prevent pressure sores, this seat pad features a reversible cotton and polyester cover that also protects the pad in case the user experiences incontinence. The pad can be used with a standard wheelchair, car seat, or regular chair. It is latex free and can be machine washed in warm water. DIMENSIONS (HxDx

Homedics Adjustable Lumbar Cushion (Model Lc-1)

The Homedics Adjustable Lumbar Cushion, LC-1, is a back support cushion designed to fit virtually any size back and to help alleviate back ache and strain. The cushion will adapt to any seating configuration and can be used at home, in the office or car. DIMENSIONS: 18 x 9 inches.

Horseshoe Cushion.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used to relieve pressure on the bony prominences of persons who lack normal sensation and are prone to develop pressure sores. Materials list and directions for making a foam cushion with horseshoe cutout in the back, used on top of a seat board for firm support. Similar to commercial products. Suggestions for a washable cover and anchoring tapes also provided. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Cho

Howdaseat

The Howdaseat is a posture chair or web seat designed to provide correct support for the back for persons with back and lower extremity disabilities. The multi-purpose, roll-up seat is made of sanded basswood slats covered with stain and water resistant canvas. Cotton webbing straps are attached to the back and seat of the chair with a stapling and wrapping method of closure for extra strength and durability. Designed to firmly support the back, the seat wraps itself around the back and bottom w

Hug Plus.

The HugPlus is a vacuum seating system that conforms to body contours eithre in a seated or lying position. Thre models: torso, full-body, and 3/4. Unit wraps around the body to provide lateral support. The full-body system has a head support with head wings and a velcro closure across the forehead. Reinforces slat back. X-ray translucent. Waterproof. Exterior surface: top is 12 ounce vinyl laminated to 70 denier nylon, bottom is 12 pounce polyester vinyl laminate. Fill is polystyrene beads. Vac

Hydro Support Configuration (Model Hsc-1)

The Hydro Support Configuration, model HSC-1, is head support system designed for supporting the enlarged heads of individuals with hydrocephalus. It is a collection of four modular pads allowing a wide variety of positioning and options. Each cushion is padded with high quality foam and locks securely into place with ball and socket brackets. The cover is sewn from Darlexx water resistant lycra that is soft to the touch against the head. This head support system comes with a choice of hardware:

I Back (Model H)

Modification for any Freedom Designs solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Cut in the shape of a capital letter-I+ so that trunk supports are at the trunk and adjustable the length of the center section. Can be used with any hardware.

I-Spire Series Lumbar Cushion

The I-Spire Lumbar Cushion is a lumbar support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. Supports lower back while seated which helps to reduce back tension. Comes with an adjustable strap with buckle to hold lumbar cushion in place.

Imak Back Cushion

IMAK® Back Cushion is a lumbar support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods of time. Designed to help improve posture and reduce back stress. Large and small vacuum-formed air pockets generate a pressure point massage for the back. Universally designed to fit most car seats as well as office chairs. Constructed of sculpted foam. Removable polyester cover is washable.

Incredihugger Wheelchair Back

The IncrediHugger Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, scoliosis, or upper extremity disabilities. This replacement back can be custom molded to fit the user's body contours. Its lateral supports help discourage side leaning, and its seat recline of up to 30 degrees discourages front sliding. The back has four inches of height adjustment, and may be folded with the wheelchair. The back comes in a standar

Inflatable Invalid Cushion (Model 6230)

Inflatable vinyl ring cushion with push-pull valve. 14 by 16 inches.

Inflatable Invalid Ring (Model 8019)

The Inflatable Invalid Ring is an inflatable ring seat cushion made of 20 gauge heavy vinyl. It has a unique Roberts valve for easy inflation. SIZE: 16 inches.

Inflatable Invalid Ring (Model F76660)

The Inflatable Invalid Ring, model F76660, is a ring seat cushion designed to take pressure off the tailbone. This oval cushion is inflatable by mouth or pump. When deflated, the cushion will fold to fit in a pocket or purse. The ring is made of heat-sealed vinyl. DIMENSIONS: 15 x 13 x 3 inches, inflated; center hole is 5 x 7.5 inches.

Inflatable Neck Rest

The Inflatable Neck Rest is a neck support designed for use by individuals with arthritis. It supports the head whether sitting or lying down. It comes with a carrying pouch for storage when traveling. DIMENSIONS (HxDxW): 4 x 9.5 x 14 inches.

Inflatable Ring Cushion (Model 30-066)

The Inflatable Ring Cushion, model 30-066, is designed to relieve the pressure of constant sitting. The push-pull inflation valve permits regulation of firmness even while in use. The cushion is made of electronically welded heavy gauge vinyl, is easy to clean and resistant to chemical deterioration or cracking. The double wall construction provides extra protection from punctures.

Inflatable Rubber Invalid Cushion

The Inflatable Rubber Invalid Cushion is an inflatable ring seat cushion designed for use by individuals with pressure sores. This durable, heavy-gauge cushion conforms to the natural contours of the body. It cleans with a damp cloth and contains natural rubber. DIMENSIONS: 15 inches diameter x 3 inches high when inflated.

Inflatable Rubber Invalid Cushion

The Inflatable Rubber Invalid Cushion is an inflatable ring seat cushion designed for use by wheelchair users and individuals who are at risk for pressure sores or have difficulty sitting for long periods. Designed to conform to the natural contours of the body, this cushion helps relieve pressure on sensitive areas by evenly distributing body weight. It has a push-pull valve for inflation and deflation, and it can be cleaned with a damp cloth. DIMENSIONS (DxH): 13 x 3 inches. COLOR: Red.

Inflatable Vinyl Invalid Cushion

The Inflatable Vinyl Invalid Cushion is an inflatable ring seat cushion designed for use by individuals with pressure sores. This cushion helps provide both support and comfort when sitting for long periods. Inflation and deflation are accomplished with a push-pull valve. DIMENSIONS: 13 inches diameter x 3 inches high when inflated.

Inflatable Vinyl Invalid Ring (Model D1001)

The Inflatable Vinyl Invalid Ring, model D1001, is an inflatable ring seat cushion designed for use by individuals at risk for pressure sores/ulcers. This cushion is made of heavy gauge vinyl. DIMENSIONS: 16 inches in diameter.

Interface Hardware

The Interface Hardware is headrest accessory hardware for the Occipital "T" Bar designed for positioning an occipital bar on a wheelchair. The Interface attaches to the rear of the occipital bar. DIMENSIONS: The swivel tubes are available in 4-, 6-, or 10-inch lengths. The "T" tubes are available in 4- or 6 inch lengths. COLOR: Available in black and stainless steel.

Interface Hardware (Models 442F2 & 442F1)

The Interface Hardware, models 442F2 and 442F1, is seating hardware designed to allow mounting of Otto Bock seating systems into Maclaren or Pogon strollers or wheelchairs ranging from 10 to 18 inches wide. A spring-loaded plunger mechanism allows quick removal of the seat for transfer into another base or for transporting. Custom interfaces are available to accommodate mounting systems on most power bases and scooters.

Invacare Absolute & Invacare Single-Density Cushion

The Invacare Absolute is a foam seat cushion designed for use with wheelchairs. This dual-firmness cushion features firmer foam under the thighs and hips and softer foam under the ischials for good weight distribution and comfort. The Invacare single-density cushion is an economy version of this comfort cushion and is available in more than 100 non-standard sizes.

Invacare Comfort-Mate Extra Cushion And Base

The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo

Invacare Contouru

The Invacare ContourU is a molded seating system kit designed for use in wheelchairs. These seat and back cushions are made by utilizing a simulator and molding bags to capture the shape of the individual. This system provides optimum positioning while accommodating complex orthopedic deformities and tone. Support surfaces are built into the cushion and multiple finshing options, including naked foam with removable cocver, vacuformed vinyl, pelvic strap notches, and undercuts are available.

Invacare Curved Back & Invacare Pneumatic Curved Back

The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.

Invacare Infinity Drop Base

The Invacare Infinity Drop Base is a drop base for a wheelchair cushion designed for use by individuals who propell a wheelchair by foot or who require a lower seating position. This height-, angle-, and width-adjustable base enables the cushion to be dropped lower within the wheelchair frame than the standard seat. Quick-release hardware permits portability and provides secure attachment to most wheelchairs.

Invacare Infinity Dualflex Back

The Invacare Infinity DualFlex Backis a back support cushion designed for use in wheelchairs. A biangular flex hinge between the thoracic and sacral support panels provides precise adjustment of the back support shape. This allows for natural thoracic extension and balancing for users who require a higher level of back support. The dynamic flex feature also provides ease of upper body mobility as well as support and pelvic stability. OPTIONS: A range of accessories is available.

Invacare Infinity Loback

The Invacare Infinity LoBack is a back support cushion designed for use in wheelchairs. This adjustable back cushion features integral lateral supports and provides support to the lower pelvis while supporting the upper body range of motion. OPTIONS: A range of accessories is available.

Invacare Infinity Uniback & Invacare Infinity Uniback Foam-In-Place

The Invacare Infinity UniBack and the Invacare Infinity Uniback Foam-In-Place are back support cushions designed for use in wheelchairs. These cushions are single-panel back supports that offer economical versatility. Pelvic stabilizers and thoracic laterals are independently angle- and width-adjustable to accommodate a range of body shapes, as well as growth or change. OPTIONS: A range of accessories is available.

Invacare Kinesthetic Seating System (Kss) And The Invacare Kinesthetic Seating System Deluxe

The Invacare Kinsthethetic Seating System is a modular seating system designed for use with wheelchairs. This fully-adjustable system provides a personalized fit and accommodates growth. The system includes the Invacare Curved Back, the Invacare Ulti-Mate (also sold separately; see separate entries), basic headrest, fixed lateral support, padded lap belt, fixed growth bracket, and mounting hardware. The Deluxe system includes the components of the basic system plus swing-away lateral supports an

Invacare Personal Back & Personal Back Plus

The Invacare Personal Back is a back support cushion designed for use with wheelchairs. This lightweight back support provides comfort and positioning with built-in lumbar and lateral supports. The Personal Back Plus offers the same features plus increased lateral depth for additional stability and support. The back can be mounted in front of or behind the rear canes or at a reclined angle.

Invacare Personal Seat With Cushion Rigidizer

The Invacare Personal Seat with Cushion Rigidizer is a gel and foam seat cushion designed for use with wheelchairs. This lightweight, contoured cushion uses a combination of foam and fluid for pelvic stability and pressure relief. A slim profile Cushion Rigidizer reduces hammocking and provides a firm, stable base of support.

Invacare S-Back

The Invacare S-Back is a back support cushion designed for use with wheelchairs. This system adjusts to the shape of the user's spine with the turn of a knob and the curve can be adjusted throughout the day for different activities. Special mounting clips enable this support to be attached and removed from sling upholstery and permit height adjustment.

Invacare Silhouette

The Invacare Silhouette is a molded seating system kit designed for use in wheelchairs. This seating system is created by utilizing shape-sensor technology to capture the precise shape of the user's body. Computer-assisted manufacturing produces a custom-contoured cushion in a choice of soft or firm foam for maximum pressure reduction and stability.

Invacare Ulti-Mate Air & Ulti-Mate Air Pneumatic

The Invacare Ulti-Mate Air is a back supportcushion designed for use with wheelchairs. This back is anthropometrically contoured to promote good support and positioning of the spine. The seat-to-back angle can be adjusted from 90 to 115 degrees of recline. Quick-release hardware allows easy installation and portability. The Ultimate-Air Pneumatic also has a pneumatic lateral support.

Invalid Ring (Model F76650)

The Invalid Ring, model F76650, is a foam ring seat cushion designed to take pressure off the tailbone of the user. The cushion is made of polyurethane foam which is hygienic, non-allergenic, and will not support bacteria. The cushion may be hand washed and cold sterilized. DIMENSIONS: 12.5 x 15 x 2.75 inches. COLOR: White.

Invalid Ring - Foam

The Invalid Ring - Foam is a foam ring seat cushion designed to relieve pressure. The molded high compression polyurethane foam ring is offered with choice of a polycotton or plaid fabric cover. OPTIONS: Replacement covers are available. DIMENSIONS: Available in 16.25 x 13 inches, 18.25 x 15.25 inches, or 14.25 x 12.75 inches. COLOR: The polycotton cover is white.

Invisible Wheelchair Lap Tray (Model 606303)

The Invisible Wheelchair Lap Tray is a clear plastic lapboard designed for use with wheelchairs. Fittings include T-bars, rubber belt fastening straps, and foam padding to protect armrests. The unit fits most standard arm wheelchairs. DIMENSIONS: 22.75 x 22 3/8 inches.

Isch-Dish Pressure Relief Cushion

The ISCH-DISH Pressure Relief Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cordura nylon cover with an elastic back, a moisture resistant core coating and a molded, removable sling-fill insert base. The cushion fea

Isch-Dish Squeeze

The ISCH-DISH Squeeze is a foam seat cushion designed for users of squeeze frame wheelchairs at risk for ischial and coccygeal pressure ulcers. This cushions are designed for use in squeeze frame chairs that drop three inches or more from knee to hip. A modified ischial pocket and pevic support extenders help counteract poor pressure distribution and pelvic positioning. The cushion includes a support core protected by a Durafilm incontinence-proof coating, a machine-washable cover, and a sling-f

Isch-Dish Thin

The ISCH-DISH Thin Cushion is a multi-layered foam seat cushion designed to help prevent and heal pressure sores at the ischial and coccyx area. It is designed for use in lightweight wheelchairs, hemi chairs, office chairs, and car seats by persons with pressure ulcers, chronic sitting pain, or poor posture and positioning. Sized to fit the user's ischial span, the cushion features a washable, moisture-resistant cover, a moisture resistant core coating and a molded, removable sling-fill inse

J2 Deep Contour Cushion

The J2 Deep Contour Cushion is a gel and foam seat cushion designed for use in wheelchairs by individuals at high risk for skin breakdown. This cushion features a foam base support structure and a longer seat well that narrows toward the rear to accommodate a posterior pelvic position. A Jay Flow Fluid Tri-pad tops the foam base and has a three-dimensional design for superior pressure distribution and to prevent bottoming out. A thick foam insert in the fluid bladder assists in pressure distribu

Jay Active Back (Models 520, 522, 525, 527 & 528)

The Jay Active Back, models 520/522/525/527 & 528, is a back support cushion designed to provide comfort and stability for chair users. This contoured support cushion is composed of lightweight materials and features adjustable height and back angles designed to help relieve back pain. It also includes an "Air Exchange" cover designed to reduce perspiration and heat buildup. With a rigid back shell, this support cushion is not intended to bow or stretch. DIMENSIONS: All models feature adjust

Jay Active Cushion

The Jay Active Cushion is a gel and foam flotation seat cushion with adductor wedges designed to prevent leaning, slouching and pressure sores, and to encourage correct posture. The cushion has a contoured foam base with a Flolite pad. Flotlite is a liquid that conforms to the user's body and does not return to its original shape; this feature protects the skin from pressure sores. The fluid is encased by three top and two bottom layers of urethane with a center seam that prevents the Flolite fr

Jay Adductor Wedges & Abductor Wedges / Build-Ups

The Jay Abductor and Adductor Wedges are accessories for the Jay Cushion. The firm foam wedges attach to the seat cushion with velcro or glues to separate (abduct) the legs, or position them closer together (adduct). DIMENSIONS: Adductor wedges are available in 1-inch (no. B119J, $25/pair) or 2-inch (B113J, $30/pair) sizes for adults, and a 2-inch junior/child (B163, $30/pair) size; Abductor wedges are 2 inches for adults (B118W, $25); abductor build-ups are also 2 inches (B118 and B168 Child/Ju

Jay Adjustable Solid Seat

The Jay Adjustable Solid Seat is a solid seat insert designed to improve posture by providing a firm, fully-adjustable base of support. The seat is adjustable in height, width, depth, and angle to allow an immediate fit and future change, when needed. The seat is made of rib-reinforced urethane and has an anti-slide surface so that cushions will not shift. The seat insert is designed to fit all wheelchairs; the universal cross-bar cut-out allows dropping the seat depth on virtually all wheelchai

Jay Back Cushion

The Jay Back is a foam and gel back support cushion designed to protect against scoliosis, kyphosis, instability, back pain, and skin breakdown. The cushion consists of an impact resistant ABS plastic shell with a middle layer of molded, contoured foam, and a Flolite spinal insert to prevent pressure problems on the spine. Flolite is a gel-like liquid that will conform to the user's body, but resists returning to its original position to prevent pressure on bony prominences. The water-resistant

Jay Colored / Personalized Covers

The Jay Colored/Personalized Covers are cushion covers available for all Jay products in all styles as a special order item. The covers are made of 100 percent polyester, and are machine washable and dryable. Personalized covers have the customer's name embroidered on the label (maximum 17 letters); there is a $25 surcharge for personalization on colored covers, and an $18 surcharge for personalization on the standard black cover. COLOR: Color choices are Fuchsia Purple, Hot Pink, Fire Engine Re

Jay Combi Posture Seating System

The Jay Combi Posture Seating System consists of two foam cushions, one contoured, dual density seat cushion and one lumbar support back cushion, designed to reduce sitting fatigue, lower back pain, and slumping while promoting correct posture. COMBI SEAT CUSHION: The Combi seat is molded from two different kinds of foam. Inside is a contoured foam core that is firm, for support. Outside, a second layer of soft foam is added for comfort. The foundation resists compression from leaning to help pr

Jay Gs Cushion

The Jay GS Cushion is a gel flotation cushion with a foam base designed for use by children in wheelchairs. Available with or without a pressure relief fluid pad to prevent skin breakdown, the cushion incorporates Jay Flow fluid technology. Its firm polyethylene foam base is pre-contoured with an anti-thrust shelf to keep the pelvis from sliding forward. A variety of secondary supports help to position and maintain optimal pelvic and lower extremity posture. The cushion includes growth capabilit

Jay Modular Back

The Jay Modular Back is a solid back insert made of aluminum that will accommodate either a Jay Custom Contoured Insert to fit deformities, or a Jay Standard Insert. The aluminum shell includes recline and depth adjustment, foam side guards, and clamp-on hardware. The Custom Contoured Insert includes a foam back with shim, full-width fluid pad, and an AirExchange cover. The Standard Insert includes a foam back with a spinal fluid pad and AirExchange cover. DIMENSIONS: Back shell is available in

Jay Protector Cushion

The Jay Protector Cushion is a gel and foam seat cushion designed to temporarily (up to 4 hours) protect the skin against pressure sores in any situation - in the shower, during recreation activities away from a wheelchair, while working on the floor, etc. The cushion has a sling design with waist and leg attachments that maintains the cushion in place during transfers. The cushion has a concealed molded foam base that absorbs impact and assists in stable sitting. On top of the foam core is a Fl

Jay Scooter Seating System

The Jay Scooter Seating System is a portable seating system for powered scooters designed to reduce fatigue and back pain, and to provide more support and stability. The system consists of a Jay Cushion with Quadrant Pad ($385) and a Jay Back ($350). The Jay seat cushion's quadrant pad is divided into four sections to support against leaning and sliding, and is filled with Flolite. Flolite is a gel-like liquid designed to conform to the user's body and to retain the user's form to maximize relie

Jay Standard Wheelchair Cushion

The Jay Standard Wheelchair Cushion is a gel flotation seat cushion designed to prevent and heal pressure sores and improve posture. This cushion features a urethane foam base that is contoured to reduce pressure on the ischials and the coccyx, and to encourage upright posture by discouraging leaning and slumping to one side. On top of the foam base is a Flolite pad. Flolite is a fluid that, once conformed to the user's body, remains in place rather than returning to its original shape to reduce

Jenx Bee Chair

Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle

Jenx Ziggy Cushion Toy

Ziggy is one-of-a-kind cushion that can be used for positioning, support, comfort and imaginative play.

Jettstep Footrest

The Jett Step is a specialized footrest that can be anchored to a standard elementary school-sized chair allowing the student to sit with proper posture and alignment (by anchoring the front legs), as well as get sensory input from having his/her feet on a solid surface. Features 2 strips of adhesive tape, non-slip bottom and made of pine.

Jiraffe Corner Seat

The Corner Seat has an adjustable height back and can be used with or without an upper back support. An abduction block is used to help keep a child well positioned, with their hips neatly back into the seat.

Juni

Juni has a seat and backrest that promotes better posture for children who require minimal level of postural support when seated. The Juni chair comes with contoured seat and backrest, built-in lumbar support, pelvic strap, height and depth adjustable seat, height adjustable armrests as well as angle adjustable backrest as standard features. This chair can be used in the classroom or at home and comes in a variety of colors.

Juni Hi Lo Base

This chair base is equipped with a gas strut to make adjusting the chair to 22.5" in height easier. The slimline footprint makes this the ideal chair to fit under most classroom desks. The Juni Hi Lo Base has been designed with both the carer and child in mind. The adjustable push handle and lockable castors aid maneuverability. The adjustable footrest provide stability for the child’s feet. The Hi Lo Base is only available for the size 1 & 2 Juni chair. The mobile base and push handle hav

Junior Ball Chair

The Junior Ball Chair is a positioning chair designed for use by adolescents and adults with mobility or neurological disabilities. This chair is designed to be used in a classroom setting for students with processing disorders who are unable to sit for long periods or students with low tone. This active seating chair with wiggling motion is designed to enhance the student’s ability to focus in a group or classroom setting. It is also helpful for exercising, improving sitting posture, and streng

Junior Chair

The Junior Chair is a youth positioning chair designed for use by children ages 18 months and up with mobility or neurological disabilities. This chair is designed to adapt to the child’s growth. Features include a height-adjustable seat and footrest, a removable lap bar, safety strap and a wide–footed base for stability. The chair is made of solid beech wood and is latex free. DIMENSIONS (HxLxW): 30 x 21 x 21.5 inches. CAPACITY: 100 pounds. COLOR: Natural wood finish.

K-Special Back

The K-Special Back is a wheelchair back support designed for use by individuals with mild to moderate kyphosis and/or weakness of the trunk. This padded fabric back replaces the standard wheelchair upholstery, has a smooth surface, and is shaped to accommodate and support the user's entire back, eliminating pressure from the apex of the curve and providing lateral support. This back is available in slip-on or screw-on styles to accommodate most wheelchairs. Folding wheelchairs can be folded with

Kabooti Donut Coccyx Cushion

The Kabooti Donut Coccyx Cushion is a foam ring seat cushion and wedge cushion designed to provide coccyx pressure relief for people with lower extremity or mobility disabilities, spinal cord injury, and others who use wheelchairs or sit for long periods. The Kabooti Cushion provides all of the seating comfort of a ring shaped cushion, coccyx cushion, and traditional seating wedge. Constructed of one-piece molded support foam, this cushion has lobes that improve seating balance. A large center o

Kangaroo Corner Chair

CUSTOM ADAPTATION PURPOSE: To provide supported seating for a child with cerebral palsy, developmental disabilities, and hearing and vision impairments. Made of wood, this low-to-the-floor chair and table set enables the child to sit with correct, supported posture with her legs straight out in front of her to stretch the hamstrings. The set is adjustable and can be used for eating, reading, or play. TITLE: Playing and Growing. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES:

Kaye Adjustable Benches (Models S1-A, S2-A, S3-A, S4-A, & S5-A)

The Kaye Adjustable Benches are adjustable wooden chairs designed for use by children with lower extremity or neurological disabilities. These height-adjustable benches feature tilt capability and vinyl-covered padded seating surfaces. The benches are useful for learning to move from one level to another or for progressing from floor sitting to bench sitting or from side sitting to upright kneeling, or from sitting to standing. The benches can also be used for dressing or as tables in conjuncti

Kaye Kinder Chairs (Models K1 & K2)

The Kaye Kinder Chairs are positioning chairs designed for use by children with neurological or severe physical disabilities. These wooden chairs are designed for children between one and seven years of age up to 48 inches tall. Model K1 is a low chair designed to fit under preschool tables between 17 and 25 inches tall. Model K2 has long legs and is intended for use at standard 30-inch tables. Model K2 is suitable for children who have outgrown conventional highchairs, but still require that de

Kaye Neat-Seat

The Kaye Neat-Seat is a youth positioning chair designed for use with children ages two to six years with mobility, neurological, or other physical disabilities. Useful for traveling therapists, wooden one-piece unit combines a table and positioning chair and folds flat without tools for storage and transport. This seat provides a firm seat, back, and footrest to maintain proper postural alignment, freeing the child's arms for skilled movement. The chair is particularly useful for children with

Kaye Straddle Seat (Model Ss1)

The Kaye Straddle Seat, model SS1, is designed for use by children with neurological or lower extremity disabilities. These seats aid the child in learning to generate adequate force in the extensor muscles while maintaining weight bearing and alignment, skills needed for proper standing posture and gait. The front end of the seat can be angled downward, placing more of the child's weight on the feet. This seat also aids controlling adduction and assymetry of weight bearing of the lower extremit

Kaye T-Seats (Models Ts-S & Ts-L)

The Kaye T-Seats are adjustable wooden chairs designed for use by children with lower extremity or neurological disabilities. These height-adjustable benches are designed for use with Kaye T-Tables (see separate entry) feature tilt capability and vinyl-covered padded seating surfaces. The benches are also useful for learning to move from one level to another or for progressing from floor sitting to bench sitting or from side sitting to upright kneeling, or from sitting to standing. The benches

Kensington Halfback Chair Pad

Kensington® Halfback® Chair Pad is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Chair pad has a molded plate and eggshell foam which encourages correct posture. Criss-cross elastic back straps are adjustable to fit all office chairs. It has a washable stretch Lycra slipcover.

Key Lock Trunk Supports

Trunk supports. For use with Adaptive Engineering Lab positioning system or most manual or power chairs. Provide lateral trunk support. Adjusts laterally and vertically. Attach to back frame of wheelchair.

Keyhole Back

The Key-Hole Back Support is a wheelchair back support designed for use by individuals with spinal curvature and other back disabilities. This back supports the user in an upright position, enhancing posture, visual field, respiratory function, balance and trunk support. The unit conforms to the individual body shape and a stretch fabric panel adjusts automatically to the severity of kyphosis, ensuring a custom fit. The user can change positions without sacrificing general support. Split back co

Kidster Chair

The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s

Kinesthetic Seating System

Modular, adjustable seating system inserts on most wheelchairs. Package includes: a firm base that suspends from the frame and features anterior wedge, preischial bar, two inches of medium density foam, latex covering and seatbelt; a back that suspends from vertical wheelchair tubing with antigravity hooks; two molded plastic lateral supports, foam covered, that adjust vertically and horizontally; molded plastic padded neck support that adjusts vertically and horizontally. Options may be purchas

Kiss (Keep It Simple) Simulator (Model Sm01)

The KISS (Keep It Simple) Simulator, model SM01, is a chrome steel frame seating evaluation system. It has adjustable seat depth, back height, back-to-seat angle, and tilt-in-space. The simulator folds for transportation. Removeable frames hold bags filled with plastic pellets for molding. Can be replaced with flat seat and back. OPTIONS: Accessories available include dual-head vacuum pump for molding (Model TL30, $700), adapter to mount unit on Arrow XT power wheelchair base, legrests, and Mag

Knee Abduction Straps (Models 25100 & 25110)

The Knee Abduction Straps are designed for use when a urinal is used or independent transfer is desired. The webbed, padded straps contact the thigh and are held in position with a cam-style buckle. Model 25100 ($68) is a complete set with 7/8 inch tubing clamps for mounting to the wheelchair frame; model 25110 ($30) includes the straps only. Both are sold in pairs.

Knee Separator (Model 6208)

The Quad Quip Separator, model 6208, is a knee separator designed to properly position the knees of individuals who use wheelchairs. Features include flexible foam padded knee separator, heavy gauge plastic, and even pressure distribution. DIMENSION: The separator is 4.5 inches wide and fits thigh circumference of 15 to 17 inches.

Knee Separator (Model F78480)

The Knee Separator, model F78480, is designed to provide gentle pressure between the legs for wheelchair users. The device is made of heavy-gauge plastic with a foam rubber lining for even pressure distribution. SIZES: Based on thigh circumference; Small (model H78480-0012) for 12 to 14 inches, Medium (model F78480-0015) for 15 to 17 inches, and Large (model F78480-0018) for 18 to 20 inches.

Knee Separator (Models N6400 & N6401)

The Knee Separator is designed for use by individuals with lower extremity disabilities. The hourglass shape helps promote proper alignment of the spine, knees, and hips. Model N6400 has a poly/cotton cover and model 6401 has a terry cloth cover. DIMENSIONS (LxDxW): 10 x 8 x 3 to 6 inches. COLOR: The cover on model N6400 is blue and the cover on N6401 is white.

Knee Spreader

The Knee Spreader is an abductor designed to maintain the knees in a slightly separated position while sitting. The separator is made of chrome plated steel and aluminum with a plastazote lining for pressure distribution. Thigh circumference is adjustable. This device is washable. SIZE: Standard size provides for 5.5 inches of knee spread. Custom sizes available through special order.

Knee Spreader (Model 6206)

The Knee Spreader, model 6206, is a knee separator designed to properly position the knees of individuals who use wheelchairs. Designed to increase sitting stability and reduce perspiration in the perinea area, this device is made of chrome plated steel and aluminum and lined with thick polyethylene foam for effective pressure distribution. The device easily adjusts to thigh circumference. DIMENSIONS: Provides 5.5 inches of abduction.

Koala Corner Chair

CUSTOM ADAPTATION PURPOSE: To provide seating and positioning for a child with microcephaly, epilepsy, and developmental disabilities. Made to dimensions specified by a therapist, this unit includes a chair with a footrest and a table that enable the child to be seated in a posturally and functionally correct position for learning, eating and playing. Made of plywood, the unit has a pedestal seat with a winged back for shoulder protraction. The seat and back panels are equipped with fabric-cove

Kodel-Bed And Chair Pads (Models 6075, 6076, & 6077)

Kodel-Bed and Chair Pads are decubitus pads designed to reduce friction for individuals who spend much of their time in bed. The Kodel pad allows for even distribution of pressure, permits air circulation and free drainage. It requires no special handling when cleaning and may be autoclaved or machine washed. The pad is stain resistant, flame resistant, non-allergenic and will not support bacterial growth. DIMENSIONS: 15 x 15 inches (6075); 30 x 40 inches (6076); 30 x 60 inches (6077).

Komfort Kush

The Komfort Kush is wedge foam seat cushion with a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. This cushion slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It is constructed of high density poly foam with an ultra-suede cover that is removable for easy cleanup. It has a non-slip bottom and a carrying handle for eas

Ladybug Corner Chair

The Ladybug Corner Chair is a corner seat designed for use by children three years old and under with neurological or mobility disabilities. This chair facilitates upright sitting and head control, offers support for straight-backed sitting, and helps protract the shoulders so that arms can come forward to function in midline. The seat back adjusts forward or backward along the seat base to enable the children to sit either in a long-leg or in a conventional sitting position. In addition, the se

Laminar & Laminar Iii Cushions

Laminar cushions are a combination of a Pudgee Pad and SunMate cushions (see also separate entries) that have been bonded together to form a very high performance seat cushion designed to meet the needs of individuals with difficult body support requirements. Laminar III cushions are composed of three layers, with a Pudgee Pad placed in between two layers of SunMate foam. The additional layer of SunMate is provided as a degree of insulation from the Pudgee which can feel cold initially in winter

Lap Desk

DO IT YOURSELF ENTRY --- PURPOSE: To provide a writing or work surface for individuals using a wheelchair or who are unable to use a desk for long periods. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a lap desk from Luan plywood. A prototype of the desk is cut out of corrugated cardboard to determine the proper dimensions for the chair with which the lap desk will be used. When complete, the desk

Lap Hugger (Models 6515, 6515M, & 6515N)

The Lap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This soft lap cushion fits between the wheelchair user and the wheelchair frame and also provides arm support. The standard model have notches to fit around the armrest posts. Model 6515N is narrower for easier removal. Both styles have a wipe-clean vinyl cover. DIMENSIONS: Both styles fit 16- to 18-inch wide wheelchairs. The standard model is 4 inches thick. COLOR: Model 6515 is blue and model 6

Lap King Wheelchair Lap Desk

The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap

Lap Pal With Nylex Cover (Models Msc019038, Msc019037, Msc019032, Msc019035, Msc019030, & Msc019036)

The Lap Pal with Nylex Cover is a lapboard designed for use as a wandering patient system for wheelchair users with Alzheimer's disease or cognitive disabilties. This safety cushion fits snugly across the user's lap and securely against the wheelchair's arms, helping to keep the user from sliding down or getting out of the chair unassisted. The cushion is made of durable, lightweight polyurethane foam covered with Nylex fabric, and provides a resting place for user's arms. The cushion is flame-r

Lap Top Cushion (Series 307010 Through 307014 & 307030 Through 307034)

The Lap Top Cushion is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. Covered in durable, liquid-proof vinyl, these polyfoam-padded cushions serve as an armrest, a means of carrying personal items, a work surface, and a tool for promoting a more upright sitting posture. Available in three thicknesses, models are offered for wheelchairs with full- or desk-length arms and fit across the user's lap under the chair's armrests. The models fo

Lap Top Tray (Models 8220 & 8221)

The Lap Top Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or remain seated for long periods of time. These trays prevent forward leaning and provide elbow and arm support, while providing an activity surface. Model 8221 is padded for extra support and to reduce the risk of pressure sores. Model 8220 is clear to promote body awareness. Both models secure to the wheelchair with Velcro straps. DI

Lap Tray

The Lap Tray is designed for use by individuals who use wheelchairs. This waterproof tray has rounded corners, is melamine impregnated for durability, and sealed on both the top and bottom. A depressed edge prevents small objects from rolling off. DIMENSIONS: 23.5 x 22 inches with an abdominal cutout of 15.5 inches wide. COLOR: Woodgrain.

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lapboard for wheelchair to make it easier to carry items. Instructions are provided on how to properly measure a lapboard for use with a wheelchair. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair, can be used for activities or for arm support. Diagrams and suggested materials for trays; suggested variations include raised edging to keep articles from slipping off board, holes cut in board to stabilize dishes or other items. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneap

Laplander

The Laplander is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This portable desk has a solid work surface with rounded corners, a cut-out oval handle, and cloth elastic straps to hold materials in place. The base is a cushion made of breathable Neoprene. OPTIONS: Laplighter clip-on light with a flexible gooseneck and replacement straps. DIMENSIONS (WxDxH): 23 x 15.75 x 2.5 inches. COLOR: Natural cherry with a cream cushion or dark cherry with a black

Large Oxbow Headrest (Model Lox100)

The Large Oxbow Headrest, model LOX100, is a headrest designed for use by use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side, and it is made of multi-layered foam with a zippered cover. DIMENSIONS (LxH): 16 x 8 inches.

Large Padded Headrest (Model Cph100)

The Large Padded Headrest, movel CPH100, s a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. This large multi-layered foam padded headrest provides comfort, support, and positioning. The headrest comes with a zippered Triptex cover. DIMENSIONS: 13 x 10 inches.

Large Rifton Activity Chair

The Large Rifton Activity Chair Standard is a positioning chair designed for children with neurological and physical disability for use in the classroom and at home. It enables children to learn functional sitting skills while they participate in activities. The Rifton Activity Chair does not require any additional tools to make adjustments. Parents and caregivers can make adjustments with the child in the chair. OPTIONS: Spring Option - This allows the child to have user-initiated movement. It

Lateral Body Support (Series 7060)

The Lateral Body Support is a lateral trunk support designed for use by individuals who use wheelchairs or geri chairs. These vertical supports stabilize the torso to provide positioning support to reduce leaning to the left or right. The supports feature a built-in armrest trough. These supports are available with a choice of three covers: launderable synthetic sheepskin, launderable polyester, and spray-and-wipe clean nylon. DIMENSIONS: Available in a choice of 12.75 or 14 inches high.

Lateral Extension Bracket

The Lateral Extension Bracket is torso support hardware designed for individuals with neurological or severe physical disabilities or cerebral palsy. The bracket expands the range in which seating supports can be adjusted laterally. The unit is attached at the end of the adjustment slot of the existing trunk lateral brackets and provides almost 3 extra inches of width adjustment for growing children and other individuals who need extra expansion of their seating system. This bracket bolts to mo

Lateral Facial Component (Model Lfc-1)

The Lateral Facial Component model LFC-1 is an accessory for the SOFT-1 or SOFT-2 headrest systems (see separate entries) that provides additional support to persons with severe ATNR or difficulty aligning in midline position. The support consists of two independently adjustable pads placed in front of the user's ears and extending from approximately the cheekbone to the crest of the head. The user's hearing or visual field is only minimally interfered by the device. The LFC-1 may be ordered thr

Lateral Hip And Thigh Supports (Adductors): 104-1000, 104-2000, 104-3000, & 104-4000)

Adductors of 1/2 inch plywood with Naugahyde, shelterite or synthetic lambswool covers. Front and rear tabs with snaps are standard. Model 104-2000 has solid seat mounting brackets which are laterally adjustable up to 3 inches. Model 104-3000 has mounting brackets in armrests, adductors can be removed with the arms. Model 104-4000 has multi adjustable mounting brackets, supports have 1/4 inch ABS plastic backing with separate removable 1 inch foam cushion. System provides adjustment for seat dep

Lateral Hip Pads

Naugahyde covered foam pads and brackets for mounting on solid back insert. Lateral adjustment possible, stabilizes hips and control adduction. 3 to 4 inches high by 5 to 10 inches deep, curved or straight.

Lateral Pads (Models 31460S, 31460M & 31460L)

The Lateral Pads are lateral trunk supports designed for use by individuals who use wheelchairs. Made of textured urethane self-skinning foam, these pads are equipped with T-nuts in all one-inch on center mounting holes. SIZES: Small, medium, or large. DIMENSIONS (WxDxH): The small pad is 3.25 x 4.25 x 1.25 inches. The medium pad is 4.25 x 6.25 x 1.25 inches. The large pad is 5.25 x 6.25 x 1.25 inches. COLOR: Black.

Lateral Stabilizer Armrest Bolsters (Series 7061)

The Lateral Stabilizer Armrest Bolsters are lateral trunk supports designed for use by individuals who use wheelchairs. These bolsters fit over the wheelchair armrests to reduce lateral leaning and provide cushioned support for the arms. The bolsters come in a choice of three covers--launderable polyester, launderable synthetic sheepskin, and spray-and-wipe clean nylon--and are available in models for full- and desk-length armrests. DIMENSIONS: Available in a choice of 5 or 6 inches wide.

Lateral Support (Model Ss20)

The swingaway Lateral Support (model SS20) can be mounted to aluminum pans or other rigid back panels, and it is designed to provide lateral trunk support to seated individuals. The support has a spring-loaded mechanism. It is adjustable forward and back and laterally. A malleable foam pad is included.

Lateral Support Orthosis (Series 7022)

The Lateral Support Orthosis is a lateral trunk support designed for use by individuals who use wheelchairs. Designed to facilitate an erect sitting posture, this orthosis is made of contoured plastic foam, padded with foam for comfort, and covered with a durable spray-and-wipe clean cover. The orthosis accommodates all torso heights and the lateral support wings can be adjusted by adding foam to the wing pockets or by warming the plastic frame with a heat gun and adjusting the wings. The foam

Lateral Supports

Lateral Supports are lateral trunk supports designed for use by individuals with mobility or neurological disabilities or spinal cord injury. All pad sizes are available in stationary or swing out style. SIZES: Small, medium, large, or extra large. DIMENSIONS (HxD): 3 x 3 inches (small), 3 x 4 inches (medium), 4.5 x 4.5 inches (large), 4 x 6 inches (extra large).

Lateral Thoracic Pad Assembly (Model Astp)

The Lateral Thoracic Pad Assembly, model ASTP, is a lateral trunk support designed to provide support to the sides of the upper body area. Stainless steel slide brackets (included) are used for mounting the pads to a solid back panel. A knob on the bracket permits easy removal. The pads are cold rolled steel, bent to 5 inch radius, with captive fasteners. These can be ordered unpadded or with 1/4-inch closed-cell foam upholstered with neoprene rubber bonded to a nylon terry cloth slip cover. SIZ

Leckey Easy Seat

The Leckey Easy Seat is a youth positioning chair designed for use with children with mobility and neurological disabilities. Designed to provide users with a variety of customized seating options, this seat allows for seat depth, leg height, armrest height, and backrest angle adjustment. Since the legs are independently height adjustable, the seat can also be tilted in space. Other features include an adjustable headrest, a height- and angle-adjustable tray with a molded rim to prevent objects

Leckey Squiggle Ess-Early Sitting System

The Leckey Squiggles Early Sitting System (ESS) is a 3-in-1 sitting system designed to provide support in sitting for children up to 4 years and 40 pounds with mobility and physical disabilities. The Leckey Squiggles ESS encourages 3 different types of sitting: 1. Dynamic Sitting – providing support to the trunk that moves with user's movements (this is a side view); 2. Long Sitting – sitting with legs out straight, often used to help stretch out the hamstring muscles on the back of the legs; an

Leckey Waistcoat

The Leckey Waistcoat is a vest restraint and torso support device designed for use by people with severe physical disabilities. This vest encourages development of proper trunk and shoulder positioning. Made of a lightweight material, the vest features two sets of adjustable vertical and horizontal straps that can be secured to the back of most chairs and seating systems with Velcro fasteners.

Leg Abductor Cushion (Models 758010, 758015, 758020, & 758025)

The Leg Abductor Cushion is a gel and foam or foam seat cushion with a built-in foam pommel to provide leg separation for individuals who use wheelchairs. The mattress features a safety strap that keeps the cushion in place, and a fluid-proof, wipe-clean vinyl cover to prevent against incontinence. Model 758010 is a foam cushion with a level base and model 758015 is gel and foam cushion with a level base. Model 758020 is foam with a wedge base and model 758025 is gel and foam with a wedge base.

Leg Rest With Seat Mounting Brackets

Custom size pad and pair of custom angled Kydex or aluminum brackets which mount to front edge of solid seat. Brackets may be hinged to provide adjustability on wheelchair with elevating legrests.

Legrest Pad (Models 440P1 & 440P2)

The Legrest Pad is an injection molded, steel reinforced calf trough with foam padding. It has an elliptical shape, curved to fit the natural contour of the leg. It attaches to the footrest support with fitted clamps. Adapter plates are available for some makes of wheelchairs. These can be used with Side Thoracic Support hardware.

Levenger Lap Desk

The Levenger Lap Desk is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This wooden desk is designed to rest on the arms of a chair to keep weight off the user's lap. This kidney-bean shaped desk is equipped with elastic straps to hold books and materials in place; included on the strap is a pen holder loop. OPTIONS: Transparent writing pad and clip-on Laplighter light. DIMENSIONS (WxHxD): 32.5 x 16 x 0.25 inches. COLOR: Natural cherry or dark cherry.

Lift-Off Lap Cushion (Model 307050)

The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p

Liquid Sunmate Foam-In-Place Seating (Fips)

Liquid SunMate is a 3-part seat mold system designed to assist persons specializing in custom seat building. The system contains pretested, premeasured ingredients sufficient to mold one chair seat bottom or one seat back. A total seat molding generally requires two units of Liquid SunMate. COMPONENTS: The introductory kit includes a FIPS instruction manual, one unit of Liquid SunMate, a quality test kit, and accessories. Components are also sold separately COLOR: SunMate may be ordered without

Low Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides a work surface at a convenient height for food preparation. Can also be used to carry items from one place to another. Directions, diagram and materials for simple wooden tray that fits over the skirt guards of a wheelchair armrest. Edging along the front of the board prevents items from rolling off. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Ins

Lower Extremity Supports, Solid Calf Panel, Calf Troughs, & Calf Cuffs

Legrests with calf supports. Model 108-3000 is solid calf panel with fixed or swing away brackets, 1 inch drop hooks, 30 degree clamp, all sizes. Model 108-4000 is molded calf trough which mounts to elevating legrests, small has 3 inch circumference, large for 5 inch circumference leg, specify length. Model 108-6000 is molded calf trough which mounts to solid wheelchair seat, small for 3 inch circumference leg, large for 5 inch circumference, specify length. Also available: calf cuffs to mount t

Lumbar And Sacral Support Dry Floatation Cushion

Neoprene rubber lumbar support cushion in two styles: standard design is 15 inches by 6 1/4 inches with 4 inch air cells; contour design is 15 inches by 6 1/4 inches with varying cell heights from 1 to 4 inches in height, made to fit specifications of user. May be used vertically or horizontally, and attach to chair with velcro strap. Weighs approximately 1 1/4 pounds. Sacral support cushion is custom designed to user's specifications, with cells varying from 1 to 4 inches in height. Easily atta

Lumbar Foam Cushion

The Lumbar Foam Cushion is a lumbar support designed for use by individuals in need of additional lower back support while sitting. Made of dense polyeyrethane foam, this cushion cradles the lower back offering additional support and stability. Features include a removable velour cover that fastens at the back of a chair with hook-and-loop fastener for desired positioning. The cover is machine washable. COLOR: The cover is beige.

Lumbar Massage Heating Pad

The Lumbar Massage Heating Pad is designed for individuals with a permanent or short-term disability that affects the lower back- specifically, the lumbar region. It also has a heat option, with two settings, that operates independently from the massage. Can be secured around the torso with adjustable hook-and-loop fasteners. Contains two massaging nodes that target the five lumbar vertebrae. Nodes vibrate to massage. Heat automatically shuts off after 20 minutes. The pad is operated with a teth

Lumbar Pads

Custom size medium density foam pads with or without 1/2 inch birch plywood base. Mount to solid back in 3 ways: strapped on with cinch strap around solid back; velcroed to adhesive back velcro on pre- existing solid back; velcroed to back with velcro stitched into back upholstery prior to assembly. Adjustable in height by repositioning.

Lumbar Pillow Half Moon (Model 887)

The Lumbar Pillow Half Moon, model 887 is a back support designed for use by individuals with back pain or injury. Constructed of firm foam covered with black colored brush nylon, this back support provides support to the lower back when sitting in a car seat, chair, etc. The pillow is latex free and comes with a contact closure strap to help hold the pillow in position (not shown). DIMENSIONS (LxW): 11.5 x 2.5 inches. COLOR: Black.

Lumbar Roll

The Lumbar Roll is a foam roll cushion designed to correct improper lumbar curve and assist in establishing correct sitting posture. The polyurethane foam roll comes standard with a washable polycotton cover. OPTIONS: Securement strap. DIMENSIONS: 4 inches in diameter x 14 inches long. COLOR: The cover is blue.

Lumbar Roll (Model N6002 & N6003)

The Lumbar Roll is a lumbar support designed for use by individuals in need of additional lower back support. Availabe in a half roll, model N6002, or a full roll, model N6003, these cushions have an attached strap to secure it in position. A cover is included. DIMENSIONS: Model N6002 is 2 x 12 inches and model N6003 is 4 x 12 inches. COLOR: Navy.

Lumbar Support

The Lumbar Support is designed for use by individuals with lower back pain, weakness, or injury. Made of medical-grade polyurethane foam, this half-roll support comes with a velour cover and fills the curve in the lower back created by sitting. The attached adjustable strap secures the support to mst desk chairs and car seats. DIMENSIONS: 14 x 6 x 3 inches. COLOR: The cover comes in navy, tan, charcoal, or black

Lumbar Support Cushion (Model F1412)

The Lumbar Support Cushion, model F1412, is a lumbar support designed for use by individuals in need of additional lower back support. Made of molded high-density foam, this cushion has an attached strap to secure it in position. A removable zippered cover is included. DIMENSIONS (WxH): 14 x 13 inches. COLOR: Navy, burgundy, and gray.

Lumbotrain

Elastic low back support. Attachment in front has two large grommets on each side of the closure tabs to insert fingers for good leverage in tightening the support. Velcro closure. /diamond shaped support in back with a removable silicone elastomer lumbosacral pad. 5 sizes fit waists 27.6 inches to 47.2 inches.

Machine Washable Sheepskin Bed Pad

The Machine Washable Sheepskin Bed Pad is designed for use by individuals who are at risk for pressure sores/ulcers. This dense pile pad can be used in a bed or chair where the 30-millimeter pile aids in reducing pressure on pressure points. Sleep directly on the wool for maximum benefit. Elastic straps hold the pad in place, but can be cut off if they are not needed. DIMENSIONS: The pad is 24 X 36 inches.

Machine Washable Sheepskin Wheelchair Pad

The Machine Washable Sheepskin Wheelchair Pad is a decubitus pad designed for use by individuals at risk for pressure sores. Designed to cover the entire wheelchair (seat and back), it is made of dense pile to reduce pressure on pressure points. Elastic straps hold the Seat Pad firmly in place. DIMENSIONS: 18 X 36 inches.

Machine Washable Sheepskin Wheelchair Seat Pad

The Machine Washable Sheepskin Wheelchair Seat Pad is a decubitus pad designed for use by individuals who are at risk for pressure sores/ulcers.Made of dense pile, this pad reduces pressure on pressure points and is equipped witrh elastic straps keep it in place on the chair or cushion. This seat pad is machine-washable using the Gentle or Wool cycle and Woolskin. DIMENSIONS: 17 x 18 inches.

Magic Hand Evaluation Kit

Heavy duty adjustable hardware system for positioning devices in close proximity to user. Ball joints allow angulation but tighten securely to maintain position. Includes table mount bracket, quick tightening handle, terminating plate for keyboard evaluation.

Magic Hands

Heavy duty adjustable hardware system for mounting head and trunk supports. Ball joints allow angulation of supports but tighten securely to maintain position. Adapters allow mounting to aluminum pans or 7/8 inch tubing. Use with Otto Bock pads or custom-made flat pads. Quick handle for frequent adjustment.

Magnetic Massage Lumbar Cushion (Model 9868)

The Magnetic Massage Lumbar Cushion, model 9868, is a combination massager and lumbar support designed for use by individuals with lower back pain and stiffness. Intended for home, office, or automobile use, this cushion features lumbar support for correct sitting posture, massage delivered by built-in massage motors, and four built-in bio-magnetic bars.

Magnetic Shoe Insoles

The Therion Ener-Flex Magnetic Insoles are designed for those individuals with lower back pain, lower leg fatigue, knee pain, or muscle cramping to relieve mild to moderate foot pain and to allow those persons to stay on their feet longer throughout the day. Durable. Ener-Flex Magnetic Insoles feature three layers of shock-absorbing foams which provides comfort. Covers the bottom of the entire foot. Include magnets that offer a deep penetrating bio-north field that dilates the capillaries to imp

Massaging Pillow (Models 3128 & 3128A)

The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1

Mechanical Shape Sensor (Mss)

Seating simulator for persons needing a custom contoured seat cushion. Mechanical shape sensor measures resistance to weight at 100 separate points across the seat surface. Independent sensors at each point record the depth of contour. Readings are imprinted on paper in a simple dot pattern, which can be mailed or faxed to the manufacturer. The dot pattern is then electronically scanned and digitized to recreate a three dimensional picture which is used for carving a customized foam cushion.

Medesign Backfriend

The MEDesign Backfriend is a back support cushion designed to prevent pain and discomfort associated with poor seating design at home, in the office, or travelling. Two models are available; both of which are portable, will fit into any chair, support both the lumbar and thoracic regions of the spine, give full adjustment of backrest inclination, and have a height adjustment to position the curve where the user needs it most. The Single Padded Model has a 1-inch polyether foam padding on both th

Medic-Air Back-Pillo

The Medic-Air Back-Pillo is an inflatable back cushion designed to provide back pain relief and long term sitting comfort for persons experiencing arthritis or back troubles. Engineered to support the curve of the lower back, this air-cushioned support adjusts to the user's needs with just a few puffs of air. It is designed with elastic straps that allows the user to fasten the pillow to the back of most chairs at the desired position. It also features three interconecting air chambers intended

Medic-Air Lumbar Roll

The Medic-Air Lumbar Roll is a back support, air-cushion designed to specifically fit the Lordotic curve of the lower back for persons experiencing lower back pain. Providing localized thrust and extension, this lumbar support is designed to fit any back and conform to any seat. It aims to provide back pain relief and long term sitting comfort. Adjustable by inflation, it also features a positioning strap and is deflatable for carrying in pocket or bag. DIMENSIONS (LxW): 20 x 7.5 inches. COLORS:

Medical Restraints Wheelchair Cushions (Model Mr 4011)

Seat cushion fabricated of Gelfoam material includes knitted cloth cover. Standard size is 16 inches by 18 inches by 3 inches.

Medical Sheepskin

Medical Sheepskins are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These tanned natural sheepskins are washable and can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS: The average size is 9 square feet and the wool length is 0.75 inch long. COLOR: Natural.

Medical Sheepskin (Model 101)

The Medical Sheepskin, model 101, is a decubitus pad designed for use by individuals at risk for pressure sores or ulcers. This tanned natural sheepskin is machine washable and dryable. It can be used in hospital and nursing home beds, wheelchairs, and in homes on chairs and beds. DIMENSIONS (LxW): 3 x 2.5 feet average size. COLOR: Natural.

Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)

The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:

Medline Contour Basic Cushion (Models Msccb1616, Msccb1816, Msccb1818, & Msccb2016)

The Medline Contour Basic Cushion is a foam wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. This single-density foam cushion is contoured to align the hips and legs while reducing pressure on any one area. The cushion's ShearX stretch cover reduces skin shear and is antimicrobial and fluid-proof. The cushion works with sling or pan style seats. DIMENSIONS (LxW): 16 x 16 inches (model MSCCB1616), 16 x 18 inches (model MSCCB1816), 18 x 18 inches

Medline Reclining Back Cushion (Mscbr16, Mscbr18, & Mscbr20)

The Medline Reclining Back Cushion is a foam wheelchair back support cushion designed for use by individuals with mobility disabilities. A replacement for the standard wheelchair sling back, this cushion creates a fixed 10-degree angle of recline. The back support has two layers of high-density foam with a built-in rigid inset and a ShearX all-way stretch cover. The cover reduces skin shear and is antimicrobial and fluid-proof. The back support fits 16-inch wheelchairs (model MSCBR16), 18-inch w

Medline Visco Form Wheelchair Cushion (Models Mscvis1616, Mscvis1816, Mscvis1818, & Mscvis2016)

The Medline Visco Form Wheelchair Cushion is a foam wheelchair cushion designed for use by wheelchair users at risk for pressure sores. The cushion has three different foam layers including high-resiliency (HR) foam and a four-pound visco elastic memory foam. A base layer of dense foam provides structure and support, preventing bottoming out. The visco elastic layer is sandwiched between the HR foam. When the user sits on the cushion the visco elastic foam molds to his/her exact anatomical conto

Memory Foam Cushion

The Memory Foam Cushion is a foam seat cushion designed for use by individuals at risk for pressure ulcers. The foam of the cushion has slow recovery propertiesd, allowing the cushion to slowly remold to the user's body with each repositioning, and allowing increased blood flow to pressure points. DIMENSIONS: 4 x 16 x 18 inches.

Memory Foam Lumbar Support Back Rest (Model 7154Bl)

The Memory Foam Lumbar Support Backrest, model 7154BL, is a foam back support cushion designed for use to provide back support while sitting in a chair. This lumbar roll offers direct support for the lower back region. The cushion's polyurethane foam adapts to the natural contours of the user's back. It has adjustable straps to fit any chair. DIMENSIONS (HxDxW): 6.75 x 3.75 x 14.5 inches. WEIGHT: 2 pounds. COLOR: Black.

Memory Lumbar Cervical Cushion With Strap

The Memory Lumbar Cervical Cushion with Strap is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is made of memory foam designed to mold to individual body contours, offering support to the lumbar area and spinal column while sitting in a chair, car seat, or lying in bed. Features include a washable, removable polyester and cotton blend cover and positioning strap.

Merry Motivator

The Merry Motivator is a height-adjustable geriatric chair designed for use by individuals with mobility, walking, or balance disabilities. This chair is designed to enable the user to remain seated while propelling the chair with his/her feet. The design keeps the coccyx off the seat, reducing the risk of pressure build-up and ulcers. Standard features include a low pressure seat with pneumatic lift for height adjustments, a high back, washable upholstery, side pouch, a non-tip U-shaped base, f

Mesa Back Supports

The M.E.S.A. Back Support is a lumbar support belt designed to aid in reducing back injuries resulting from lifting activities, particularly on the job. The belt gives abdominal and lower back support. All supports are made with shoulder straps and are machine washable. Styles include deluxe, premium, and power netting. OPTIONS: Belts without shoulder straps, metal stays, reflective tape, and company name/logo imprints. SIZE: Extra small to extra extra extra large and made-to-order sizes are ava

Metatarsal Cushion

This Metatarsal cushion is meant to cushion the balls of the feet and relieve pressure in the middle foot. The stretchy polymer gel pads relieve pressure in the middle foot area. They come in a pair or a left and right set. Can be slipped over second toe so it will stay in place. Corrected foot support promotes better posture.

Metatarsal Sleeve

This Metatarsal Sleeve is designed for those individuals with metatarsalgia who experience pain in the metatarsal region of the foot and for those individuals who could use relief from Morton’s neuroma, callouses and other disabilities that affect the forefoot. Soft elastic sleeve stretches to conform to your foot. Under the sleeve is a gel pad that eases pain. Top loop holds gel pad in place. Gel pad if made of Thermoplastic Elastomer (TPE) gel. Remove product 3-4 hours daily to let breathe. Ha

Micro-Tech Classic Chair Sensor Pad (Model 83700)

The Micro-Tech Classic Chair Sensor Pad, model 83700, is a wandering patient system designed for use with individuals with cognitive disabilities or Alzheimer's disease or individuals at risk for falls to monitor when individuals get up from a chair or wheelchair. When the sensor pad is connected to the Micro-Tech Informer or Sentinel series monitors (see separate entries), it will transmit a signal to the monitor when the user gets out of the chair or wheelchair, removing his or her weight from

Micro-Tech Informer (Model 81781) & Informer Deluxe (Model 81791)

The Micro-Tech Informer and Informer Deluxe, models 81781 and 81791, are wandering patient systems designed for use with individuals with cognitive disabilities or Alzheimer's disease or individuals at risk for falls to monitor when individuals get out of bed or rise from a wheelchair or chair. Both units feature top-mounted flashing lights to help to locate the monitor; dual button alarm reset to deter resident tampering; 0-2 second delay option for restless residents; and an audible low batter

Micro-Tech Sentinel (Model 81850) & Sentinel With Voice (Model 81860)

The Micro-Tech Sentinel and Sentinel with Voice, models 81850 and 81860, are wandering patient systems designed for use with individuals with cognitive disabilities or Alzheimer's disease or individuals at risk for falls to monitor when individuals get out of bed or rise from a wheelchair or chair. Both Sentinel units attach to a wheelchair, chair or bed using the included belt clip or Velcro adhesion patch provided, and the units connect to a Micro-Tech Sensor Pad (see separate entry). The Sent

Miller's Complete Support Systems

The Miller's Complete Support Systems are lateral trunk support components designed to be mounted off the seat, back insert, modular pan, or wheelchair frame, depending on the application, to give support to the trunk and pelvic areas or to provide adduction. Components of the seat, back, or pan-mounted systems include fixed, swing-away, and multiplane inserts, pads, and doglegs. The doglegs allow approximately 2 additional inches of lateral adjustment. The Multi Plane provides greater flexibili

Miller's Mounting Hardware Components

The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.

Mini-Bolster Chair

Chair with straddle position design. Adjustable height, 8 to 11 inches. Accessories: 28 1/2 inch wide by 22 inch deep tray, adjustable pelvic strap, and handle. 22 inch by 19 1/2 inch base with swivel casters and safety railing available. .

Mobile Corner Sitter

The Mobile Corner Sitter is a posture chair designed for use by children with mobility or severe physical disabilities. Designed for children ages 4 to 8 years up to 58 inches tall or smaller children ages 8 months to 4 years, up to 39 inches tall, these chairs are intended to help children develop postural control and encourage balanced weight bearing. Features include removable, adjustable head supports; a padded removable, adjustable abductor; a height- and depth-adjustable tray; swivel loc

Mobility Gseat

The Mobility GSeat is a seat cushion designed for use by individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, especially people who use wheelchairs or mobility scooters. It is designed to fit the seats of most wheelchairs and mobility scooters, and to provide long-term comfort for people who are seated over 12 hours each day. The Mobility GSeat is made with visco-elastic gel layered over dense memory foam which m

Mobilizr

The MOBILIZR is a torso support and wheelchair seatbelt for use by people with lower extremity and mobility disabilities, spinal cord injuries and others who use wheelchairs and need assistance to maintain or regain an upright position. This product requires no tools for installation on a wheelchair or scooter with push handles. It fits around the waist and over one shoulder. The MOBILIZR allows the user to bend forward, and then it aids the user to return to an upright position. It adjusts from

Modified Dining Chair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted dining chair for a young woman with Dravet syndrome, an intellectual disability and epilepsy. Her seizures are severe and hard to control. When the young woman was younger she use to sit at the kitchen table using a high chair but as she got older, she outgrew the high chair and now needed a new way to sit comfortably at the dinner table. Upon initial evaluation, the assessment team tried a TAD Michelle Tilt-in-Space Supp

Modified Kindergarten Chair

CUSTOM ADAPTATION PURPOSE: To provide a child with multiple disabilities with appropriate seating. Three wooden kindergarten chairs were modified to meet the needs of specific children. Seat and back inserts, measured for each child, were added to the standard chairs and bolted on using metal brackets. A pelvic belt and a crotch strap were added to assist with positioning. TITLE: Supporting Early Intervention. JOURNAL: TAD Journal. REF: Volume 26, Number 3, October 2006. PAGES: 16-17. Number o

Modu-Tray

The Modu-Tray is a lapboard with bookholder designed to act as a tray or writing board for wheelchair users. Interchangeable inserts allow the user to have an adjustable easle for computer keyboard, reading, games, or a communication board, or a microwavable, dishwasher-safe fixed bowl that will not tip. The tray is made of a see-through Lexan plastic and features a cutout. It may be modified to fit standing tables, bolster chairs, and hospital bed tables. When fitted to a wheelchair, the tray i

Modular Cushions

Prefabricated molded modular seat and back cushions. Seat cushions come with or without molded abductor. Back cushions are available in two heights per width. Available in widths of 12 inches, 14 inches, 16 inches and 18 inches. Available to fit into separately sold aluminum pans or mounted to wooden base. Optional: headrest, shoulder retractors, armrests, leg rests, lateral supports, chest straps, tilting base, mounting hardware.

Modular Posture Control Systems: Pelvic Positioner

The Modular Posture Control Systems are modular positioning systems that easily attach to conventional wheelchairs. The Pelvic Positioner are designed as heavy-duty, multipositional, curved independent pads that bear on the sub-asis to secure the pelvis. They limit pelvic rotation, tilt, and obliquity. The positioners are available for both the track style mounting and the hex. The track style positioners are released by lifting the knurled portion of the pivot. They are then rotated outwards fo

Modular Seat And Back Cushions

The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.

Molded Ring Cushion (Models 8014, 8016, & 8018)

The Molded Ring Cushion, models 8014, 8016, 8018, is a foam ring seat cushion designed to conform to the natural body contours. The cushion is made of one-piece puncture-proof molded foam. COVERS: machine washable Dacron/cotton; the cushions are also available uncovered. COLORS: Navy, White, Plaid. Sixteen inch ring is available with fleece cover. SIZES: 14, 16, 18 inches.

Mor-Loc Kodel Bed Pads (Models 60-140, 60-150 & 60-160)

Mor-Loc Kodel Bed Pads are decubitus pads designed to provide comfort and prevent bed sores for individuals who are bed ridden. They are made with fire retardent allergy-proof Kodel synthetic pile. DIMENSIONS: Available in pads measuring 24 x 30 inches, 30 x 40 inches, and 30 x 60 inches.

Mosaic Cushion (Models Mos1616C, Mos1618C, Mos1816C, & Mos1818C)

The Mosaic Cushion is an air flotation wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. This washable inflatable cushion has interconnected polyvinyl air cells. The cushion comes with an incontinence cover. DIMENSIONS (LxW): 16 x 16 inches (model MOS1616C), 16 x 18 inches (model MOS1618C), 18 x 16 inches (model MOS1816C), or 18 x 18 inches (model MOS1818C). WEIGHT: Model MOS1816C weighs 1.2 pounds; weight varies by size. CAPACITY: 250 pounds.

Moss Lap Tray

The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.

Motorized Wheelchair Seat Shifting System

-- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair seat that aids wheelchair users to change his or her seated position periodically. Changing position when seated for a long period of time is especially important for wheelchair users who spend almost every making moment seated. Failure to do so can result in deformities, bedsores, or considerable pain. The Swiss research group, Empa, is working with an ergonomics company to develop a new type of wheelchair seat that periodica

Mounting Brackets (Model Mb02 Thru Mb 06 & Mb12) & Trunion Mounts (Tm01, Tm02, Tm03, Tm11, Tm12 & Tm13)

Mounting Brackets and Trunion Brackets are interfacing hardware designed for mounting seating systems on a variety of mobility bases. Quick release or permanent mounts are available. The brackets ($25) are for mounting on wood or aluminum shells (see related entry) and come in two sizes: 7/8 inch and 1 inch. The trunion mounts ($58) are available in the same sizes.

Mounting Switch

The Mounting Switch is a touch switch designed for use by individuals with severe physical disabilities, spinal cord injuries, or upper extremity disabilities. This switch may be mounted in a variety of locations (though used primarily at the head level) and shaped for optimal positioning. The activation pressure of the switch is adjustable from one to three ounces and an audible click is emitted when the switch closes. DIMENSIONS: 6.5 inches long. WEIGHT: 3 ounces.

Movement Sensor Switch (Model 655)

The Movement Sensor Switch, model 655, is a motion detection switch designed for use by individuals with upper extremity and other physical disabilities. This switch operates in momentary, latched, or timer mode and activates the attached toy or appliance with the slightest movement in front of the sensor.

Movin' Sit Air Cushion

The Movin'Sit Air Cushion is an air flotation seat cushion designed to give the user a slanted seat base to promote proper sitting posture. This adjustable, wedge-shaped cushion is inflatable, washable, and portable. It also functions as a dynamic surface, with small, rounded protrusions on one side to create air circulation. The unit may also be used as a lower back support. It is inflated by mouth and easily adjusted for any chair or surface. DIMENSIONS: 14 x 14 inches.

Movin' Sit Jr.

The Movin' Sit Jr. is an air flotation seat cushion designed gor use by children with physical disabilities. The inflatable cushion can be used with any chair or in automobile seats to encrease endurance of the postural muscles by promoting active sitting. The wedge-shaped cushion also works to balance the spine to encourage proper posture. DIMENSIONS: 10 x 10 inches. COLOR: Royal Blue.

Mps - Mobile Positioning System

The Mobile Positioning System - MPS (models 30-1100 and 30-1101) is a modular seating system on a wheeled base. The system consists of wedges, rolls, abductors, adductors, blocks, log, straps, and mobile base. Components are made of foam covered with a urine proof, stain and odor resistant, non-toxic material that is cleanable with a damp cloth. SIZES: MPS Child, 48 x 27 inches, and MPS Adolescent, 56 x 27 inches.

Mss Tilt And Recline (Models 4635 & 4636)

The MSS Tilt and Recline model 4635 and model 4636 are pediatric positioning seats designed to provide growth adjustments and optimum positioning for children with physical or neurological disabilities. FRAME: The chair is available with in a small low frame (model 4635, or medium high frame (model 4636). Each chair can be converted to a floor sitter. The low frame (small) l model raises height by 3 inches, and the high frame (medium) model raises height by 10 inches. SEAT (WxD): The seat is 9 x

Multi-Axis Offset Headrest Assembly (Model 32465)

The Multi-Axis Offset Headrest Assembly, model 32465, is seating hardware designed to attach offset headrests to standard wheelcahair frames. The entire assembly is designed to be used with small, large, combination, small lateral support, and neck rest style headrests (headrests sold separately). The heavy-duty assembly features an offset block that swivels on a ball for headrest adjustment in any direction, a straight bar that adjusts horizontally, a heavy-duty mounting ring, a durable mounti

Musical Posture Trainer (Model 1120)

The Musical Posture Trainer, model 1120, is a posture switch designed to provide feedback with soft music for indivudals with little or no muscle control. It attaches to any part of the body with a velcro strap. This positive feedback device plays soft music when the desired position is achieved.

Mutli Position Sleeping Pillow

The Multi Position Sleeping Pillow is a pillow and lumbar mat designed to support the cervical and lumbar spine. Useful for side, back and stomach sleepers. Supports the cervical and lumbar spine, and cushion knees and hips. Side Sleepers: Place the pillow between knees and the lumbar mat under lower back for spinal alignment. Back Sleepers: Place the pillow under neck and the lumbar mat under lower back to compensate for sagging mattresses. Stomach Sleepers: Place the pillow under one shoulder

My4Hands

My4Hands is a lapboard for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The My4Hands independence assistant is a polyethylene board that has a proprietary "hold fast" high friction material coating on each side so the lapboard will hold position on the user's lap and items placed on the lapboard will remain in place. My4Hands also insulates the user's legs from heat generated by objects (such as laptop computers or cooking pots

Mydesc Arm - Standard And Removable Models

The MYDESC Arm is an add-on armrest wheelchair accessory designed to enhance the versatility of the MYDESC Custom Desktops (see separate entries) or to be used alone. This accessory allows the MYDESC units to be mounted on the side of armchairs and wheelchairs. This steel arm is padded with foam and available in two configurations: Standard and Removable. The MYDESC Standard Arm (model 347-S501) is designed to be a fixed accessory and attaches directly to wheelchairs and other furniture using st

Mydesc Custom Desktops

The MYDESC Custom Desktops are adjustable lapboards ergonomically designed to provide a hard writing or reading surface to wheelchair users and other individuals who work away from a desk or table and to alleviate the eye strain and neck pains associated with lap work. These portable units enable the user to swivel, tilt, or pivot the desk surfaces through an infinite number of positions in order to achieve the most comfortable desk surface accessibility possible. ADJUSTABILITY: These Custom Des

Mydesc Direct Mount Models (Models Dm500 & Dm900)

The MYDESC Direct Mount Model 350-DM500, and the 90 Degree Direct Mount Model with Elbow Assembly 350-DM900, are mounting hardware for the MYDESC lapboards to clamp onto a wheelchair's frame or armrest. They include clamps and an adjustable MYDESC lapboards. The clamps will accommodate tubing from 3/4 to 1.25 inches in diameter, and both can be mounted either horizontally or vertically. Model 350-DM900 provides more height and distance from the wheelchair user's body.

Mydesc Flip Top Storage Desk (Model 250-31)

The MYDESC FlipTop Storage Desk, model 250-31, is a lapboard designed for use by wheelchair users. This laptop desk is suitable for an artists or students who needs a place to put their supplies. It has a tilting work surface that lifts to reveal a storage compartment. Because both sides of the work surface are supported by a ball-joint, the surface can be tilted or shifted from right to left, and one side swings away for transfers. An Air Spring Lifter helps to ease lifting and lowering of the

Mydesc Scooter Model, The (Model 5000)

The MYDESC Scooter Model, model 5000, is a swing away lapboard designed for use with scooters. This lapboard attaches to the bottom of the scooter seat on a curved post that fits between the seat and the controls. The work surface features tilt-, height-, and swing-away adjustments. The unit features a transparent acrylic work surface, powder-coated steel tubing, and aluminum brackets that support up to nine pounds. The unit rotates and rises with the seat and it can independently swing out of t

Mydesc Tilt-Top Desks

The MYDESC Tilt-top Desks are lapboards designed to provide an adjustable hard writing or reading surface for persons who work away from a desk or table, or for wheelchair users. These portable desks are ergonomically designed to accommodate the user's needs by swiveling, tilting, and pivoting through an infinite number of positions. When use of the desk surface is completed, the desktop swings away from the user's body with a single wrist motion. There are four different tilt-top models availab

Nada-Chair

The Nada Chair is an adjustable posture chair with poly/cotton pad to provide extra support for the lumbar (lower back) area. The fabric "back- sling" uses the knees to brace the back and maintain the curve of the lower spine. Webbed straps extend from the back pad around the knees while sitting. A buckle between the knee straps prevents legs from abducting. Padded around the knees and back for extra comfort. COLORS: Assorted.

Nandu Snug Seat

The Nandu Snug Seat supports active children who require additional trunk and hip support. The Nandu is available in four sizes, each with up to 6.5 inches continuous height adjustment and up to 8 degrees forward tilt. The back rest can be reversed to provide abdominal support when in the forward leaning position. This design will help children sit up to work without having to work to sit up.

Ne-At Headrest Bracket

The NE-AT Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury, cerebral palsy and other individuals who need adjustable head support. This hinged bracket has 0.25-inch countersunk mounting holes spaced 1 inch apart, with a spring loaded crank handle for tightening in tight spaces.

Ne-At Quick Release Mini Trap Assembly

The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.

Ne-At Seat

The NE-AT Seat is a modular seating system of comfortable and supportive positioning pads designed for use in wheelchairs. Although each piece is available and can be used independently, the full NE-AT Seat comprises the NE-AT Seat, NE-AT Back, and NE-AT Headrest and is designed to fit into any mobility aid. The reusable and reshapable positioning pads are constructed of thick rubber bonded to nylon and filled with Styrofoam beads. This not only creates an airtight bladder, but adds cushionin

Ne-At User Adjustable Lateral (Ne-Atural) Bracket Mount

The NE-AT UseR Adjustable Lateral (NE-ATURAL) Bracket Mount is lateral trunk support hardware designed for use by individuals with neurological or severe physical disabilities or cerebral palsy. This width-adjustable lateral bracket mount interfaces with most commercial and custom seating systems and converts most commercial and custom lateral brackets into lateral brackets that can be adjusted in width by the user or caregivers to make room for winter jackets or sweaters. Existing swing away o

Ne-At Ya (Yet Another) Tray Mounting Bracket

The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs.

Neasy Swing Away Aug Com Mounting System

The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio

Neck Rest

The Neck Rest is a neck support designed to provide relief of pressure on the neck or shoulder muscles. The polyurethane foam support features a U-shaped groove in the center to support the neck. A polycotton cover is included. DIMENSIONS (WxHxL): 6 x 6 x 14 inches long. COLOR: The cover is available in white or blue.

Neck/shoulder Positioning Collar Assembly

The Neck/Shoulder Positioning Collar Assembly is a headrest designed to replace both occipital support and rigid shoulder positioners or other anterior thoracic supports for users with moderate to low "tone." The malleable aluminum collar provides posterior neck support and superior and anterior shoulder support. It is padded with closed cell foam and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/back adjustment with a

Neoprene

Neoprene is a Lycra covered foam material that is waterproof and washable. DIMENSIONS: 1/8 x 44 x 120 inches ($120) or 1/8 x 42 x 45 ($85). COLORS: Silver and Dark Red.

Night Roll

The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Intended for overnight use, this toll ties around the user's waist to provide lumbar support while lying down. DIMENSIONS: 36 x 4 inches for 24 to 34 inch waists or 42 x 4 inches for 34.5 to 40 inch waists.

Nodstop Special Needs

The Nodstop Special Needs is a head support designed for use by individuals with cerebral palsy, weak neck and shoulder muscles, or neurological disabilities such as amyotrophic lateral sclerosis (ALS) or multiple sclerosis (MS) who require assistance in holding their head upright while in a seated or semi-reclined position. It keeps the user's head, neck and shoulders in an upright position, and assists caregivers by holding up the user's head so the caregiver can have both hands free to feed t

Nodstop Travel

The Nodstop Travel is a head support designed for use as a comfort aid that promotes relaxation through support and stabilization of the head,neck and shoulders during travel, and by encouraging proper body mechanics and posture for healthy breathing and circulation. It can help provide restful sleep, relaxed neck and shoulder muscles, reduced pain and strain during travel, stabilized body posture and spine position, and improved breathing and circulation. It is for passengers using all modes o

Noggie‚Ñ¢ Plush

Noggie™ Plush is a support soft seat designed for use by premature infants weighing up to 8 pounds while positioned in a car seat or stroller. It has two firm arms that wrap around the infant to provide comfort and support. The flexible arms move up or down, to the front or sides to meet individual needs. The removable head supports and cradles the infants head and neck and can be adjusted up or down to accommodate the infants growing needs. The Noggie™ Plush slips easily into infant carrie

Non Adjustable Protractors, Adjustable Protractors

One pair of custom size pads and one pair of custom bent Kydex brackets. Secured at shoulder height onto solid back with bolts through threaded wooden inserts. Slotted brackets ($178) allow width adjustment. Adjustable brackets ($246) are two-piece, allowing depth adjustment behind shoulder. Pads are 1/2 inch thick medium density foam and 1/2 inch birch plywood.

Normally Open Sensing Cells (Model No-1)

The Normally Open Sensing Cells, models NO-1 is a low-profile, sealed sensing switches in wafer form. It feature 2.5 pounds nominal sensitivity with positive bottoming to withstand continuous body weight, and a water resistant sealed casing. This switch can be mounted using Mastic cement, epoxy, DA-12 tape, or the optional metal holder. OPTIONS: Metal holder. DIMENSIONS: 1.5 inch in diameter. COLOR: Black.

Obus Forme

The OBUS Forme is a back support cushion designed to provide proper spinal support in any chair, auto seat, sofa, or bed. This support conforms to the natural contours of the spine to guide the back into a correct anatomical position, allowing it to relax. This posture eliminates lateral pressure on the spine to reduce fatigue and discomfort and to provide support for the upper rib cavity. The support is available in high- or low-back models and can be fitted with an optional lumbar pad for extr

Obus Forme Customair Back Cushion

The Obus Forme Custom Air Back Cushion is an inflatable back cushion designed for use by individuals with mobility disabilities or back pain. Inflation and deflation valves are built into the cushion; air pump and release buttons enable the user to control the amount of support provided by the cushion. An attached elastic strap secures this cushion to any chair or seat. DIMENSIONS: 19.5 x 12.75 x 1.5 inches. COLOR: Black.

Obus Seat

The OBUS Seat is a seat panel designed to relieve fatigue from the buttocks to the sacrum and to the lumbar and thoracic areas. The panel will support up to 75 percent of the body's weight and prevent the ischial tuberosities to sink into soft cushions. The coccyx is protected by a contoured buttocks frame with a cut-out seat depression. The device also protects the thighs with additional molded padding to reduce fatigue, improve circulation, help prevent swollen ankles and feet, and maintain pr

Obus Supporting Roll

The OBUS Supporting Roll is a cylindrical pillow designed to provide support to either the lower back (lumbar area) or the neck (cervical area). This roll can be used in a chair or car seat. An elastic strap is included to hold the pillow in the desired position. The fabric cover can be removed and cleaned. DIMENSIONS: 12 inches wide, 4 inches in diameter. COLOR: Black, brown, burgundy, camel, grey, green, taupe, and two shades of blue.

Obusforme Highback Backrest Support

The ObusForme Highback Backrest Support is a back support cushion designed for use by individuals with back pain or individuals who spend long hours sitting. Designed to support the head, neck, and lower back, this polycarbonate S-shaped frame conforms and supports the natural contours of the back both laterally and horizontally. The frame of the backrest is covered with three layers of polyurethane foam that can be removed and sponge washed. The support also has a removable and adjustable lumb

Occi Dish

The OCCI Dish is a head support designed to relieve preesure from the back of the head. This support features a detachable cervical pad and a Durafilm-coated core for moisturer resistance.

Occipital "t" Bar (Model 1670)

The Occipital "T" Bar, model 1670, is a neck support designed for head, neck, trunk, and shoulder support for individuals with spinal cord injury or severe physical disabilities during wheelchair use. The bar is made of high strength aluminum alloy, padded with high resiliance foam tubing, and covered with a Lycra slip cover. The unit includes two quarter-inch-20 x 0.5 inch SHHD screws for attaching to the "T" Tube-Plate weldment. DIMENSIONS: The foam 1.5 inches in diameter. The bar is 6 3/8 inc

Occipital Angle Bar (Models 1681 & 1683)

The Occipital Angle Bar is a neck support designed to provide head, neck, trunk, and shoulder support for individuals with severe physical disabilities or spinal cord injury during wheelchair use. The bar is made of high strength aluminum alloy padded with high resiliant foam tubing and covered with a Lycra slip cover. The bars are U shaped with a 30-degree angle at the bends. The unit includes two quarter-inch 20 x 0.5 inch SHHD screws for attaching to the Swivel Tube or "T" Tube-Plate weldment

Occipital Bar Assembly

The Occipital Bar Assembly is a headrest designed to provide posterior head support for individuals with good medial/lateral and rotary head control. The straight (model ASOB-ST) and contoured (models ASOB-LC and ASOB-SC) occipital bars are padded with neoprene rubber and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/backward adjustment with slide bracket and knob. DIMENSIONS: The Straight bar is 6 inches long. The Con

Occipital Headrest Systems & 2-Step Headrest Systems

The Occipital Headrest Systems are head supports designed to provide support beneath the occipital portion of the head, as well as laterally. An aluminum ban inside the headrest covers may be bent, shaped, or cut down. Models are available fixed and swing-away, with or without headbands (nos. 91100 to 93200). The 2-Step Headrest models are appropriate where additional surface area and contact are required. They have an ABS plastic base which can be heated and re-shaped for a more precise fit. Th

Occipital Ring With Hinge Bracket (Models 1456, 1455, 1467, & 1468)

The Occipital Rings are neck supports designed for head, neck, trunk, and shoulder support during wheelchair use. The ring is made of high-strength aluminum alloy and covered with high density tubular foam and a Lycra form-fitting slip cover. The hinge bracket at the back of the ring is designed to interface with the swivel tube hardware for use on a wheelchair. SIZES: Available in small child, large child, small adult and large adult. DIMENSIONS: The width between the support tubes is 3.5 inche

Offset Multi-Axis Headrest Hardware

The Offset Multi-Access Headrest Hardware is a headrest accessory designed for use by individuals with severe physical disabilities and spinal cord injury. This hardware comes with a horizontal bar and ring for attaching a headrest pad. Our headrest hardware also comes with a back clamp which attaches the vertical tube to the back of the chair. COLOR: Black chrome.

Olympic Vac Pacs

Olympic Vac Pacs are body positioners designed for use by individuals with physical disabilities.These products are patient positioning systems comprised of large rubberized vinyl bags filled with tiny plastic beads. The bags are soft and pliable until the air is drawn out through a special valve. Atmospheric pressure forces the beads into a solid mass conforming to the exact molded shape. Vac Pacs hold their shape for 24 to 48 hours and allowing air back in to the bag returns Vac Pacs to a soft

One Leg Therapy Stool

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The stool helps those who struggle with fidgeting, such as individuals with Autism, ADD, ADHD or other cognitive disorders. Old crutches and scrap wood are utilized to create an adjustable seat that helps one practice self-regulation. COMMENTS: The One Leg Therapy Stool allows those with cognitive or fidgeting impairments practice self-regulation.

Original Mckenzie Airback Roll (Model 706)

The McKenzie Airback Roll, model 706, is an inflatable back support cushion designed for individuals with low back pain, injury, or arthritis. Constructed of nylon-covered vinyl, this portable lumbar roll can be adjusted for firmness by increasing or decreasing inflation. The roll can be deflated and folded for transport in a wallet, pocket, or purse.

Original Mckenzie Cpm Roll (Model 709)

The Original McKenzie CPM Roll, model 709, is a lumbar support designed for use by individuals with lower back pain, weakness, or injury. This support also offers continuous passive motion to the lower back, inflating and deflating every 40 seconds. Continuous passive motion helps increase lower back flexibility and reduces muscle fatigue. The cushion includes a strap to secure it to a car seat or chair. POWER: Uses a car cigarette lighter adapter (included). An optional alternating current (AC)

Original Mckenzie D-Section Lumbar Roll (Model 700)

The Original McKenzie D-Section Lumbar Roll, model 700, is a back support cushion designed for use by individuals with lower back arthritis, injuries, or disabilities. This cushion features a D-shaped design intended to provide back support for the reduction of postural stress on the lumbar discs. Made of foam with a washable polyester cover, this roll secures to chairs and automobile seats with permanently attached adjustable elastic straps.

Original Mckenzie Lumbar Roll

The Original McKenzie Lumbar Roll is a back and lumbar support cushion designed to relieve back pain for individuals who have difficulty sitting for long periods. This portable lumbar roll supports the natural curve of the spine in all seating conditions. Designed with adjustable elastic straps, this roll made of foam and fits most chairs. DIMENSIONS (LxD): 11 x 5 inches. The straps are 38.5 inches long.

Original Mckenzie Lumbar Roll (Models 701 & 702) And Original Mckenzie Early Compliance Lumbar Roll (Model 704)

The McKenzie Lumbar Roll is a back support cushion designed for use by individuals with lower back pain, injury, or arthritis. Designed to support the lumbar lordosis while sitting this padded foam tube is placed between the curve of the lower back and the chair. A detachable elastic strap allows the roll to be worn around the waist or strapped to a chair. The roll's materials are washable. Model 701 is standard density and Model 702 is firm density. The Original McKenzie Early Compliance Lumba

Original Mckenzie Night Roll (Models 750, 751, & 752)

The Original McKenzie Night Roll is a back support cushion designed for use by individuals with lower back arthritis, pain, or injury. This roll provides back support for the lumbar region while the user is lying on his/her side or back. Made of foam with a removable, washable cotton and polyester cover, this roll ties around the waist. SIZES: Model 750 is extra small (fits waists up to 24 inches), model 751 is small/medium (fits waists 24 to 34 inches), and model 752 is large/extra large (fits

Original Mckenzie Super Roll (Model 708)

The McKenzie Super Roll, model 708, is a back support cushion designedfor use by individuals with lower back pain, arthritis, or injury. Made of foam with a velour cover, this roll features a removable elastic strap that can be attached to a high or low back chair and car seats. A Velcro strip sewn on the cover also enables direct attachment to fabric chair backs.

Ortho Wedge Seat Cushion

The Ortho Wedge Seat Cushion is a foam seat cushion designed to alleviate pressure on the tail bone (coccyx). This wedge-shaped cushion has a cutout for the tail bone. The wedge shape tilts the pelvis forward for proper seated positioning. Made of resilient polyurethane foam, the cushion has a breathable, machine-washable velour cover. DIMENSIONS: 12.25 x 16.25 inches.

Orthocare Economy Arm Positioner Elevator (Models 3032 & 3033)

The Orthocare Economy Arm Positioner Elevator (##3032 and ##3033) is an elevating armrest and positioner designed for elevation of the forearm. This wedge elevator is made of foam with a contoured recess to position the arm. This device can be used in bed or with the pivoting arm positioning tray for wheelchairs (see separate entry). Vinyl covers are available; call manufacturer for prices. SIZES: Small (##3032, $9.35) and Large (##3033, $14.75).

Orthocare Elevating Horizontal Arm Orthosis

The Orthocare Elevating/Horizontal Arm Orthosis - Supinated or Pronated is an elevating armrest and positioner for use with wheelchairs or other chairs. The armrest is available in two styles: Models ##3034 to ##3039 are anatomically designed for supinated, neutral positioning that inhibits spasticity; Model ##3040 has a universal design that allows for pronated positioning with natural palmar arch. The system consists of an aluminum U-channel that adapts to all wheelchair arms securely with sta

Orthocare Pivoting Arm Tray (Model 3012) & Dynafoam Elevated W.h.o. (Model 3013)

The Orthocare Pivoting Arm Tray and Dynafoam Elevated W.H.O. are two separate devices designed for use one with the other. PIVOTING ARM TRAY (##3012, $45.25): This mounting clamp for a wheelchair accessory is made of ABS plastic fastened to an extruded aluminum channel with limited pivot capability. The L-bars of the clamp channel adjust to adapt to all wheelchair arms. DYNAFOAM ELEVATED W.H.O. (##3013, 36.45): This wrist and hand orthosis fits into Pivoting Arm Tray to create an elevated arm po

Orthocare Polynap

Orthocare Polynap is foam strap padding made of a urethane foam and napped nylonDE combination. Sold in rolls, this foam can be used to pad straps. The material iDE s napped on both sides and combines with Velcro hook material for universal fast DE ening along the entire length of the strap. DIMENSIONS: ##2001 measures .25 x 6 iDE nches x 15 feet per roll; ##2044 measures .25 x 2 inches x 15 feet per roll.

Orthocare Rigid Foam Knee Spreader (Models 2045 & 2048)

The Orthocare Rigid Foam Knee Spreader is a leg positioner and knee separator made of closed-cell foam that is flexible, yet firm enough to maintain abduction. The foam is easily cleaned by hand scrubbing with a mild detergent, but will not absorb liquid. Polynap straps with Velcro closures maintain the spreader in place. SIZES: Adult (##2045, abducts legs 5 inches) and Pediatric (##2048, abducts legs 3 inches).

Orthocare Slip-On Footrest Extenders (Model 3014)

The Orthocare Slip-On Footrest Extenders ##3014 are designed to eliminate heel slippage and override, and to provide static positioning for spasticity. The extenders are made of vacuum formed ABS (plastic). They have a raised, curved heel section and flat foot section. Padded Velcro straps cross the instep to hold each foot in place. The slip-on mounting adapts to standard footrests. The design allows a vertical fold-up position without interference. Sold in pairs.

Orthocare Static Knee Spreader (Models 2035 & 2041)

The Orthocare Static Knee Spreader ##2035 and ##2041 is a knee separator and hip abduction splint designed to abduct the hips and separates the knees while in sitting position. The device is constructed of aluminum and Kydex. Two curved shells fit the inside of the thighs, and are separated by an aluminum bar. DIMENSIONS: Model ##2035 provides 5 inches of abduction; Model ##2041 is adjustable to provide 5 to 10 inches of abduction. If necessary, the device can be modified with a heat gun.

Orthocare Static Knee Spreader With Mirror (Models 4042 To 4044)

The Orthocare Static Knee Spreader with Mirror is a knee separator and abductor designed with an adjustable mirror for self-catheratization and rigid knee separation. This spreader is constructed of aluminum and Kydex plastic. SIZES: Small (##4044, 6.25 inches of abduction), Medium (##4043, 9 inches of abduction), and Large (##4042, 11 inches of abduction).

Orthocare Suprone Headrest (Model 2018)

The Orthocare Suprone Headrest ##2018 is a contoured headrest designed to provide stable supine or prone positioning. It is made of polyurethane foam, and has a cross ventilation slot for breathing. SIZES: One size fits all.

Orthopedic Cushion

The Orthopedic Cushion is a foam seat cushion for persons with lower extremity disabilities. The unique angled seat cushion is designed as a forward sloping wedge with a rear cut out to ease back discomfort by preventing compression of the coccyx, aligning the spine and restoring the natural lumbar curve. Built-in handles add portability. Made of high density foam, the cushion is washable and is available with a choice of a poly/cotton cover or a fleece cover. DIMENSIONS: 14 inches x 19 inches.`

Orthopod

The Orthopod is a low back orthosis and full back cushion designed to provide the user with the precise spinal pressures at various points on the back. The cushion may be used by individuals suffering from low back pain, arthritis, post spinal surgery pain, post laminectomy/spinal fusion, various spinal disc conditions, and sciatica. The support is portable and may be used when driving or travelling by car, bus, truck, etc., or at work. Two models are available: a High Back and a Low Back.

Orthopod Chair

The Orthopod Chair is a high back posture chair designed with a back support system engineer for the human spine. This adjustable office chair features a free float and dynamic back that moves with the user; adjustable arms with 7 different height settings; a free float seat tilt that locks into any position; a totally adjustable strapping system for individual and precise back support comfort. The chair has a 5 point base with caster wheels. OPTIONS: The chair is also available with a mediu

Orthotic Drop Seat (Model 6331)

The Orthotic Drop Seat, model 6331, is a solid seat insert designed to lower a wheelchair seat to enable foot propulsion of a wheelchair or to enable the user to reach the footplates. This seat replaces a standard sling seat and provides adjustable drop and it may be configured to create a wedge to prevent forward sliding. A removable padded, wipe-clean vinyl cover is included. DIMENSIONS: This seat fits 18-inch wide chairs and the drop is adjustable up to 3.5 inches.

Otto Bock Tall Back And Modular Back Headrest Mounting Kit & Otto Bock Headrest Adapter Kit

The Otto Bock Tall Back and Modular Back Headrest Mounting Kit ($5) and the Otto Bock Headrest Adapter Kit ($20) are headrest accessories that allow attachment of Otto Bock headrest mounting hardware directly to the Jay Back cushion, compensating for the contour of the cushion.

Oval Head Support System (Model Ohs-1 & Ohs-2)

The Oval Head Support System, model OHS-1 and OHS-2, are head supports designed for individuals wo have difficulty holding their head up on their own. Both Designs are padded with high quality foam and lock securely into place with ball and socket adjustment. Model OHS-1 is designed for minimal support, while model OHS-2 is larger and designed for wide support and well padded for those with behavioral difficulties. Both pads are covered in Darlexx water resistant lycra that is soft to the touch

Oval Hip Pad Kit - As4000 & As5000 (Models 4331-01, -21, -31, -32, -33, 4333-01, -21, -31, -32, & -33)

The Hip Pad Kit is designed for hip positioning of individuals seated in wheelchairs, but will adapt to heavier positioning applications. Made of 16 gauge, cold, rolled steel that has been deburred for a smooth finish and plated to prevent corrosion. The plate is formed with a recess for two rows of ##10-32 press nuts and redius corners. The kit consists of one complete pad and all the hardware necessary to mount the pad to the wheelchair seat. OPTIONS: Available in metal only or with cover of t

Oval Hip Pad Kit As4000 & As5000 (Models 4370-31, -32, -33, 4372-31, -32, & -33)

The Oval Hip Pad Kit is a lateral hip guide designed for positioning the hips of an individual with spinal cord injury or severe physical disabilities while in a wheelchair. The pads are designed with internal threads for mounting support brackets which attach to the seat bottom. Adjustments for the hip pads can be made front to back, in and out, or up and down. The pads are constructed of steel padded with 1.25-inch closed cell foam and completely covered with a Rubatex slip cover. A kit conta

Oversize Deluxe Poly-Carbonate Wheelchair Tray (Model 11E)

The Oversize Deluxe Poly-Carbonate Wheelchair Tray 11E is a lapboard for use by wheelchair users. The tray includes a universal mounting system, continuous 5/8 inch high lip/retaining edge, captive locking-knobs, and telescoping support arms for strength. The rim is fused into the plastic tray for added strength without added weight. DIMENSIONS: 24 x 24 x 1/4 with a stomach cutout 14 inches wide and 8.5-inch deep. WEIGHT: 12 pounds.

Oxbow Headrest (Model Ox100)

The Oxbow Headrest, model OX100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side. DIMENSIONS: 15 x 4 inches.

Packable Walking Stick

The packable walking stick is designed for persons with walking disabilities that would benefit from the use of a cane or a walking stick. The metal tip for gripping soil can be exchanged with a rubber one.

Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)

The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1

Padded Leg Rest With Attached Foot Rest & Padded Side Panel Leg Rest With Attached Foot Rest

Custom size leg and footrest pads with two pairs of bent Kydex or aluminum brackets, mounting footrest pad to legrest pad, and legrest pad to bottom edge of solid seat with bolts through threaded wood inserts. Adjustment for length and depth available. Can also be ordered with four side pads, two on each side of legrest and two on each side of footrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood, with vinyl covering.

Pal Swing-Away Lateral Support

PAL (Positive Action Lateral) Swing-Away Lateral Support is a lateral trunk support designed for use by individuals with balance disabilities, severe physical disabilities, or spinal cord injury who use wheelchairs. The pad angle of this lateral thoracic support can be rotated plus or minus 10 degrees. It is designed to fit the Evolution Back from Varilite (see separate entry). The pad has a steel base encased in multi-stiffness closed-cell foam with a washable cover, and is available in curved

Panda Futura, The

The Panda Futura is a seating system on a wheeled base designed for use by children from one to twelve years of age with mobility disabilities. This unit accommodates children with needs that change throughout a single day and is availavble with a choice of five mobility bases, including manual or power high-low frames that enable the child to interact from floor-level to the kitchen table. The contoured, padded, fabric-covered seat is available in a variety of sizes and the back of the seat ad

Panda Seating System By R82

The Panda Seating System by R82 is a seating system on a wheeled base for children and adults. FRAME: Indoor frame with gas spring has a 4 caster base; dimensions are 67 x 48 centimeters (cm), with seat height adjustable from 40 to 52 cm, or 46 to 58 cm. Hydraulic indoor frame with 4 caster base has the dimensions 67 x 48 cm, and seat height adjustable from 48 to 63 cm. Outdoor frame is 64 x 62 (standard width) or 52 cm (narrow) with seat height adjustable from 45 to 53 cm and dual bicycle type

Patient Ring

The Patient Ring is a foam ring seat cushion designed to relieve pressure during long-term sitting. Molded of high-compression polyurethane foam, this cushion includes a waterproof cover. DIMENSIONS: 16.25 x 13 inches. COLOR: The cover is navy.

Paxbac

PaxBac is a wheelchair back support designed to promote a more upright posture and to provide the proper amount of back support for wheelchair users with sling-back chairs. Made of molded foam, the unit fastens to the back of most sling back chairs with built-in attachment hooks. A tension strap allows the user to increase or decrease the amount of support provided to meet the differing needs of various activities. A loop handle on the tension strap enables the user to make adjustments while rem

Pediatric & Adult Anterior Thoracic Vests

The Pediatric and Adult Anterior Thoracic Vests are shoulder supports designed to be fastened to solid back panels of seating systems. The vests are made of neoprene rubber with nylon terry cloth bonded to both sides. Straps with nylon side-release Fastex buckles are attached to the vest. OPTIONS: Extra cushioning available to slide over shoulder straps. DIMENSIONS: Adult size is 7 x 5 inches high; Pediatric size is 4 x 4 inches high. The neoprene is 1/8-inch thick. COLOR: Black.

Pediatric Ball Chair (Model Ap 400)

The Pediatric Ball Chair is a posture chair designed for use by children with physical or neurological disabilities. This chair is designed to promote dynamic active sitting to strengthen a child's back and help his/her posture. The chair consists of a frame, with a back rest, that holds a therapy ball as the seat of the chair. The latex-free ball can be inflated to different sizes to accommodate the child. The frame has non-locking casters for mobility, and the four legs are height adjustable.

Pediatric Bucket Seat

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The Pediatric Bucket Seat is a quick and simple floor seating solution for young children with balance, mobility or neurological disabilities who need a little extra support. For safety reasons, this seat should ONLY be used on the floor.

Pediatric Chest Harness

The Pediatric Chest Harness is a wheelchair torso support and positioning device designed for use by children and smaller adults with neurological disabilities. The harness has pads constructed from closed-cell foam and enclosed in a soft, breathable fabric. Elastic sewn at the shoulder allows for moderate movement such as weight shifting, propelling, reaching, and simple activities of daily living. The harness has a top pull and stays attached to the chair when not in use. It is washable and co

Pelvic / Hip Stabilizer

Solid, wedge shaped wood core with 1/2 inch high density foam padding. Covered with naugahyde, shelterlite, or lambswool. Available on adjustable/removable or flipdown hardware. Mounts to solid seat. Small: 6 by 3 by 3 inches tapered to 2 inches. Medium: 7 1/2 by 4 by 4 inches tapered to 2 inches. Large: 9 by 4 1/2 by 5 inches tapered to 2 1/2 inches. Extra large: 12 by 5 by 7 inches tapered to 3 inches.

Pelvic Stabilization Y Belt (Model 103-4000)

Y belt pelvic stabilization system provides control of pelvic tilt, rotation and obliquity. Price includes modification of solid seat to accommodate (with new seat). Sizes: extra small (6 to 8 inch sitting depth), small (8 to 11 inches), medium(11 to 14 inches).

Pelvic Stabilizer With Flip Bracket (Model Ee 3B/103-3000)

Pelvic stabilizer designed to allow abductors to flip under the seat to accomodate easy transfers. The bracket release is designed to be accessible to the independent user who is capable of gross motor skills. The abductor locks automatically in the same location to assure proper position of the pelvis and the rest of the body. Release available in right or left. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 i

Pelvic Stabilizer, Adjustable & Removable (Model Ee 3A/103-2000)

Removable pelvic stabilizer. Has a bottom hook that slides over seat into the proper position. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inches high by 5 inches wide at the front and 2.5 inches wide at the rear, Extra large 12 inch

Pelvic Strap (Sb05)

The Pelvic Strap (model SB05) is a 1 1/2 inch nylon webbing belt designed to position, stablize and restrain an individual's pelvic area wen seated in a seating system or wheelchair. It has a push-button buckle closure. The strap's length is adjustable on one side, and there are three positioning grommets on opposite side.

Pibd (Models 310, 410, & 510)

Two layered foam cushion with built in pre-ischial bar. Sizes: 16 by 16 inches by 3 or 4 inches thick, 16 by 18 inches by 3 or 4 inches thick. Y40 indention load Includes zippered washable double knit cover. Optional: various cutouts, special widths or depths, and naugahyde, shelterite, or synthetic lambswool cover.

Pillow Block & Abductor Block

The Pillow Block and Abductor Block are abductors designed for keeping the knees spread when seated. The Pillow Block (model 25150, $68) is made of firm, closed-cell foam and features contoured sides to "hug" the inside of the thigh. This model mounts to the chair frame with velcroed webbing. The Abductor Block is a padded, upholstered abduction wedge with a pull release swing-away block. The block mounts under the seat, and swings under the seat front for clear transfers. SIZE: Abductor Block i

Plaid Coccyx Cushions (Models N1001P & N1002P)

The Plaid Cocccyx Cushions are foam seat cushions designed for use in wheelchairs. These cushions have a firm foam base, a coccyx cutout, a removable masonite insert for firm support, and a removable cover. DIMENSIONS: Model N1001P is 3 x 16 x 16 inches and model N1002P is 3 x 16 x 18 inches. COLOR: The cover is plaid.

Plantar Fasciitis Hot/cold Therapy Roller

The Plantar Fasciitis Hot/Cold Therapy Roller is a therapeutic hot/cold roller that massages and stretches the arch of the foot to reduce the pain of plantar fasciitis. This product has an hourglass shape, three convex surfaces that provide a firm grip, and a stable base to loosen the plantar fascia tissue. The device can be used at room temperature. The roller also can be warmed in water or chilled in the freezer. Clean its antimicrobial surface with soap and water.

Plantar Fasciitis Insoles

Plantar Fasciitis Insoles are orthotic insoles designed for individuals with plantar fasciitis or persons with a weak arch or for adult men and women who just need added support when standing or walking. The insoles use a 4 degree rear wedge which encourages a neutral foot position, preventing excessive pronation. Provides shock absorption. Can trim to ideal height.

Plastazote Foam Material

Plastazote Foam Material is splinting material and foam padding designed for use with individuals with arthritis or other upper or lower extremity disabilities. This material is heat-activated by heating in a 285-degree oven, after which it can be formed into soft, lightweight splints, cervical collars, or shoe inserts. The material can also be laminated by placing one piece on top of another and heating. This material is available in sheets or in rolls with self-adhesive backing. DIMENSIONS: T

Plastic Wheelchair Tray (Model 11A)

The Plastic Wheelchair Tray 11A is a clear acrylic lapboard that attaches to wheelchair arms with hook and loop straps that adjust with D-rings. The tray is rimless and has a radiused and polished edge. The tray has a 4-inch deep stomach cutout. DIMENSIONS: 17 x 24 x 1/4 inches; straps are 2 inches wide. WEIGHT: Approximately 5 pounds.

Playtray

The Playtray is a lap tray designed for use by children and adults with disabilities. This heart shaped tray is constructed of a durable, impact-resistant plastic and features a tabletop with a no-spill raised edge, a large storage compartment, a 360-degree gutter drink holder, and a carrying handle. The top is large enough to accommodate a standard notepad, a laptop computer, or food and drink. Its base provides stable support by fitting snugly over a person's lap. The tray is dishwasher safe.

Poly-Carbonate Wheelchair Tray (Models 11B.1 To 11B.4)

The Poly-Carbonate Wheelchair Tray, models 11B.1 to 11B.4, is a clear plastic lapboard with straps and D-rings for adjsutment, a 4-inch deep stomach cutout, and a 5/8-inch high styrene plastic rim. DIMENSIONS: Model 11B.1 is 16 x 20 x 1/4 inches; Model 11B.2 is 19 x 24 x 1/4 inches; Model 11B.3 is 24 x 24 x 1/4 inches; and Model 11B.4 is 24 x 24 x 1/4 inches with an 8-inch deep stomach cutout. WEIGHT: Models 11B.1 and 11B.2 are approximately 6 pounds; Models 11B.3 and 11B.4 are 8 pounds.

Polycarbonate Tray

The Polycarbonate Tray is a wheelchair lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The tray is made of polycarbonate and is available with no rim or with a polycarbonate, wooden, or rubber rim. SIZES: Child for 11 to 12 inch wheelchair; Junior for 13 to 14 inch wheelchair; Teen for 15 to 16 inch wheelchair; Adult for 17 to 18 inch wheelchair; Extra-Wide for 19 to 20 inch wheelchair; 2X-Wide for 21 t

Polycarbonate Tray (Model Tr03) & Elbow Pads (Tr21)

The Polycarbonate Tray (model TR03, $125) is a lapboard 1/4-inch thick with a rim across the front and sides designed for use on wheelchairs and seating systems. There is one size tray with cutout. The Elbow Protectors (TR21, $70) come in black only and are designed to be mounted to the tray.

Polyester Bed Pads (Models D2001, D2002, D2003, & D2004)

The Polyester Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Made of Kodel polyester, these pads are soft and resillient and non-allergenic. The pads are machine washable and dryable. DIMENSIONS: Model D2001 is 24 x 30 inches, model D2002 is 30 x 40 inches, model D2003 is 30 x 60 inches, and model D2004 is 36 x 72 inches.

Polyester Wheelchair Pads (Models Msc019470, Msc019471, Msc019472, & Msc019473)

Polyester Wheelchair Pads are footplate (model MSC019470), calf (model MSC019471), armrest (model MSC019472), and seat / back (model MSC019473) pads designed for use by individuals who use wheelchairs. These soft, flame-retardant polyester pads protect and support the arms, legs, and feet. The pads are machine washable and do not mat. The calf, armrest, and seat / back pads are latex-free.

Polyethelene Foam

Polyethelene Foam is foam material designed for use in prosthetic and orthotic applications. Available in soft, firm, and medium densities, this cross linked perforated foam can be thermowelded to polyethylene or to itself or be cemented with plastic polyadhesive cement. DIMENSIONS: 36 x 60 x 1/8 or .25 inches thick. COLOR: White.

Pommel Sit-Straight

The Pommel Sit-Straight is a foam seat cushion with a built-in pommel for abduction designed to reduce sacral sitting and to limit forward movement of the pelvis of individuals using sling seat style wheelchairs. The cushion has a concave bottom and a flat top. The pommel reduces the danger of adduction contracture and has a core that extends through the cushion to the cushion base for added stability. The material of the surface of both the cushion and the pommel is made of T-Foam (see separate

Portable Back Rest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lightweight back rest with a waterproof sitting area. Backrest made with 2 pieces of plywood 12 by 16 inches drilled at the top and strung together with strong twine, 2 pieces of twine on the bottom end of the boards so they open to the proper angle, and a piece of plastic coated cloth glued to the bottom of one of the boards for the child to sit on. COMMENTS: Suggests working with a therapist to determine proper angle and any necessary harness. SKILLS

Portable Easy Up

The Portable Easy Up, models 1220 and 1221, is a foam seat lift cushion designed to assist individuals to stand up from a seated position. The cushion adds 3 to 4 inches to the height of any chair seat, and acts to position the hips and knees at 90 degrees to make it easier to rise. The cushion comes with a carry strap and a machine washable fabric cover with zipper closure. DIMENSIONS: 15 x 15 x 3 inches (model 1220, $29.95) or 15 x 15 x 4 inches (model 1221, $36). WEIGHT: Under 1 pound. COLOR:

Portable Foot Rest

This Portable Foot Rest is designed for individuals who are in danger of DVT or Deep Vein Thrombosis. A foot rest may be needed to correct posture. The foot rests extends, is adjustable and folds up to fit in a carry on bag.

Portable Workstation Table + Fan

This Portable workstation is designed for adults who carry their work with them. It can fold up to fit inside most laptop carrying bags. It is ergonomic and functional. Meant to unfold to an ideal height and prevent against neck/back aches. Has a built in fan which keeps the workstation cool. Its features include dual cooling fans, adjustable legs, an angled resting spot, a cup holder, a Universal Serial Bus (USB) extension cord. Built of heavy duty plastic. Includes instruction manual. Pen/penc

Portal Pro

The Portal Pro is a treatment chair designed for use by therapists assisting persons with biomechanical exercises. The system takes 10 seconds to assemble with its lightweight compact design and can be opened to the users preferred settings. It features tilting arm and face rests, a chest pad, seat and knee rests attached with velcro designed to comfortably support the users body; all of these components are adjustable to a multitude of settings. For this system, there is no bar that exists betw

Posey Breezeline Pelvic Holder (Models 4411 & 4427)

The Posey Breezeline Pelvic Holder, models 4411 and 4427, is a pelvic restraint designed for people with lower extremity or mobility disabilities and others who use wheelchairs to prevent the user from sliding out of the wheelchair or geri-chair. It is available with either a double tie strap for triangulation (model 4411) or a slide buckle. SIZES: Small, medium or large. DIMENSIONS (LxW): Model 4411 is 17.75, 21 or 24 x 17 inches (model 4411) or 16.5, 19 or 23 x 17 inches (4427). Upper waist st

Posey Comfort Pad (Models 6324, 6340 & 6360)

The Posey Comfort Pad, models 6324, 6340 and 6360, is a decubitus pad designed for use by individuals at risk for pressure sores. This decubitus pad is made of synthetic fur and is machine washable. Standard or lightweight available. DIMENSIONS: 24 x 30 inches (model 6324); 30 x 40 inches (6340); 30 x 60 inches (6360).

Posey Comfy-Seat (Models 6526 & 6526G)

The Posey Comfy-Seat, models 6526 and 6526G, is a seat cover for wheelchairs or geri chairs designed for people at risk for pressure sores or who have mobility disabilities. This flame-retardant, machine-washable padded cover fastens to the chair with ties and also provides protection from pinching by covering gaps in the chair. Reinforced openings enable the use of a positioning belt. Model 6526 is intended for use with wheelchairs and model 6526G is intended for use with geri chairs. DIMENSION

Posey Lateral Stabilizers (Models 6312Sc, 6316Sc, 8212, 8212Sc, 8216, & 8216Sc)

The Posey Lateral Stabilizers, models 6312SC, 6316SC, 8212, 8212SC, 8216, & 8216SC, are lateral trunk supports designed to promote proper trunk alignment for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs who lean laterally. The secure fit prevents rolling of the stabizer on the armrest. These bolsters are available with removable, washable cotton covers (models 8212 and 8216) or vinyl (models 6312SC, 6316SC, 8212SC and 8216SC). The

Posey Molded Foam Cushion With Liquicell Interface Technology ( Models 7515, 7516, 7525, 7530 & 7535)

The Posey Molded Foam Cushion with Liquicell Interface Technology, models 7515, 7516, 7525, 7530 and 7535, is a foam seat cushion designed to for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs and are at low risk for pressure ulcers or require posture support. This foam cushion has Liquicell fluid filled bladders sewn into the removable cover. It is designed to relieve pressure spots and reduce forward sliding. It is also intended

Posey Self-Releasing Belt (Models 4183, 4183L, 4220, 4222, 4229 & 5145)

The Posey Self-Releasing Belt, models 4183, 4183L, 4220, 4222, 4229 and 5145, are wheelchair seat belts for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This belt has an airline-style buckle allowing for one-handed release by the user. It is made of machine-washable polyester webbing and can be used on a shower chair. The belt mounts on the wheelchair or shower chair with a screw (models 4183 and 4183L), rear removable buckle (4220),

Posey Self-Releasing Hugger (Model 6514)

The Posey Self-Releasing Hugger, model 6514, is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl. It fits in front of the user's waist and extends on the sides between the user and the wheelchair frame. It provides a flat surface over the user's lap as well as arm support. This unit secures to the wheelchairs with hook and loop closures which automatically release as the wheelchair user rises from the cha

Posey Torso Support (Model 3656)

The Posey Torso Support, model 3656, is a belt restraint and torso support designed to prevent forward leaning and sliding by people who use wheelchairs and geri chairs. This support features a wide chest band and two over-the-shoulder straps which can be fastened in the front or back with hook and loop closures. It is made of soft quilted fabric. SIZES: Small, medium, large, extra large and extra extra large; the extra large and extra extra large sizes should be selected for use with geri chair

Positioner Foam

Positioner Foam is an open-cell polyurethane ester foam material with a density of 2 pounds per cubic foot designed to be easily cut with a sharp knife to make shapes for x-ray or seating positioning. This fire-retardant material circulates air and absorbs liquids. When used uncovered as a positioner, it resists slipping on the surface. This foam can be upholstered for applications where its ability to absorb liquids is undesirable. DIMENSIONS: 27 x 72 inches with thicknesses of 1 to 6 inches in

Positioning Chair

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with neurological disabilities. An existing Sebel Hobnob Junior Chair was modified to meet the child's specific needs. A height-adjustable footrest that slides out from under the seat was added. The chair was also equipped with glides on the legs for easier movement, and ant-tips were added to the rear legs. For more precise support, a removable lateral plywood insert was added to the seat. The insert was removable when the ch

Positioning Hardware

Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six

Posture Buzzer (Model 1140)

The Posture Buzzer, model 1140, is a posture switch designed to provide posture training for individuals with physical disabilities. This miniature mercury switch sounds when a body part is tilted beyond pre-set angle. It is the size of quarter and may be worn anywhere on body.

Posture Corrective Brace

The Posture Corrective Brace is a back brace designed for use by individuals who have a disability, like osteoporosis and postural disturbances or a condition that causes hunching or slouching, and designed to return those individuals’ back to a healthier stature. Reduces lower back pain, slouching, and hunching. Holds shoulder and back in a healthier position. Easily adjustable hook-and-loop closure increases and decreases the amount of support and pressure. Soft, non-elastic straps provide a s

Posture Curve Lumbar Cushions

The Posture Curve Lumbar Cushions are back support cushions designed to provides support vertically and laterally to the lumbar (lower back) area. The cushions are available with a strap to fasten to a seat at at the desired height. Models 102 or 103 for curved bucket seats of cars fit the inside width with angled back corners to go between the wings or bolsters at each end of the seat. The zippered covers are available in plaid or solid, velour or Merino wool.

Posture Improving Saddle Seat

The Posture Improving Saddle seat is designed to replicate an equestrian's posture to aid in reducing back fatigue and discomfort while seated. The slight forward slope shifts the pelvis forward and raises the buttocks above the knees, resulting in a semi-standing posture that discourages slouching. The sides of the seat are also sloped, spreading the knees apart (hip abduction) and keeping the pelvis upright to reduce stress on the back, shoulders, and neck. The structure also removes contact p

Posture Monitor

The Posture Monitor is a biofeedback device designed to support individuals who have a limited physical control and difficulty maintaining appropriate posture due to neurological deficits. Its purpose is to promote attention given to maintaining proper trunk alignment by individuals seated in wheelchairs, thus encouraging a seated position that offers greater functionality; enhances learning, self esteem, and mobility; and improves physiological factors such as respiration, circulation and diges

Posturetex-Multiway Cushion

Posturetex-multiway cushion is designed for individuals with limited mobility and use a wheelchair or a scooter for mobility. It is a versatile cushion featuring a 2 inch nodular foam base as well as a 2 inch nodular foam back which can be folded in half to make a 4 inch base cushion. The 2 inch base cushion is available with standard or coccyx cut out. Covered in black jacquard velvet which is removable for machine washing and a carry handle easy transportation. Spare covers are also available

Posturite And Memory Ii Coccyx Seat Cushion

Foam seat cushion with coccyx cutout in rear. Vinyl leatherette cover with removeable fibreboard insert. Available in Memory II foam which contours to body shape.

Power Headrest

The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip

Powered Armchair Modification

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted armchair for an adult with Charcot Marie Tooth Disease, a disease similar to Muscular Dystrophy, which causes muscle weakness and foot drop, making it difficult to walk. The individual had used a powered lounge chair to watch television. The chair had a remote control which tilted the chair at an angle that would lift the individual forward and hold him into an almost standing position to help him transfer to his walker and

Ppt Foam Padding

PPT Foam Pading is foam material designed to provide cushioning in splints and to cushion hypersensitive areas. Available with or without self-adhesive backing, the open-cell foam has a top layer of washable nylon skin that is smooth and comfortable to the touch. DIMENSIONS: 1/8 x 12 x 60 inches.

Prefant Pillow

Premature infant supine support pillow for infants over three pounds and medically stable. Pillow is constructed of flame retardant urethane foam, covered by vinyl Staph Check 6, with quilted washable slipcover. Foam is contoured to maintain flexed position of infant, with separate head support. Pillows are color-coded by size. Three sizes: Small (tan) for infants 1250 grams to 1800 grams; Medium (blue) for infants 1800 grams to 2410 grams; Large (white) for infants 2410 grams to 3500 grams. One

Premium Guard Gel “E” Seat Cushion (Models 14890, 14891, & 14905)

Premium Guard Gel "E" Seat Cushionis a gel flotation seat cushion designed for use by people who use wheelchairs. This pressure- reducing cushion assists in the prevention and healing of pressure sore ulcers. DIMENSIONS (HxLxW): 3 x 16 x 18 inches (model 14890), 3 x 16 x 16 inches (model 14891), or 3 x 17 x 17 inches (model 14905). WEIGHT: 4.4 pounds (model 14891), 4.6 pounds (model 14890), or 4.8 pounds (model 14905).

Premium Guard Visco Foam Cushion (Model 14892)

The Premium Guard Visco Foam Cushion, model 14892, is a foam seat cushion designed for use by wheelchair users. DIMENSIONS (HxLxW): 3 x 16 x 18 inches. WEIGHT: 2.8 pounds. COLOR: Blue. WARRANTY: 1 year.

Pressure Reduction Wheelchair Cushion

The Pressure Reduction Wheelchair Cushion is an air and foam flotation seat cushion designed for use in wheelchairs. This cushion is made to accommodate the buttocks and the thighs while creating maximum pressure relief for the bony prominences. Pressure distribution is created by a layer of gel on top of a layer of foam with a Ventex Recovery 5 cover. The pressure in the pad is controlled by an air valve which allows the support pressure to be varied. DIMENSIONS: 18 x 17 x 4 inches.

Pressure Relief Turning Cushion (Model Ha-4782)

The Pressure Relief Turing Cushion, model HA-4782, is a foam ring seat cushion and turning aid designed for use by individuals who are at risk for developing pressure sores. This doughnut-shaped foam cushion fits the hips to reduce pressure when sitting. It distributes weight evenly and helps the user to maintain the correct posture. It also provides 360 degrees of rotation for turning. A washable cover and non-slip sheet are included. DIMENSIONS: The overall diameter is 400 millimeters and the

Pressure-Check Foam Cushion With Coccyx Cutout (Model 754525)

The Pressure-Check Foam Cushion with Coccyx Cutout, model 754525, is a foam seat cushion designed to relieve pressure on the coccygeal area for people who use wheelchairs. Pressure-Check foam has sections that adjust to the user for uniform pressure distribution. The cushion also features a firm contoured foundation to reduce sling-seat hammocking and spinal pressure. The spray-and-wipe clean nylon cover has straps to secure the cushion to the wheelchair. DIMENSIONS: 16 x 18 x 4 inches.

Primary Angle Bench (Model K5P)

Seat with individually adjustable height legs. Seat size 13.5 by 18 inches. Adjustable height 10 to 16 inches. Adjustable seat angle horizontal to 35 degrees. Fabricated of birch plywood and hard maple. Can also be used as a tray for floor sitting. Warranty available.

Primary Bolster Chair

Chair with a flat padded bolster bench. Foot railings to maintain foot placement. with or without straps. Adjustable pelvic straps and tray. Back slots accept the TherAdapt Winged Back Insert and Thoracic Pads. 2 inch swivel casters. Bolster is 8 1/2 inches wide, 22 inches long and adjusts 9 to 15 inches in height. Tray is 28 inches wide, 28 inches deep and adjusts 5 1/2 to 8 1/2 inches cutout depth. Base is 29 by 20 1/2 inches.

Prism Elite Cushion

The Prism Elite Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require moderate postural support and offers contours that are intended to promote correct seating posture. The Elite Cushion has three distinct layers: a top layer of soft poly foam; a central layer of pre

Prism Ideal Cushion

The Prism Ideal Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require mild to moderate postural support and offers contours that are intended to promote correct seating posture. The Ideal Cushion has three distinct layers: a top layer of soft poly foam; a central laye

Prism Supreme Air Cushion

The Prism Supreme Air Cushion is an air and foam flotation seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require moderate postural support and offers pressure distribution relief. The Supreme Air Cushion has a base layer of high-density polyurethane support foam with leg troughs a

Prism Supreme Cushion

The Prism Supreme Cushion is a seat cushion with a contoured base for individuals with low back pain, arthritis, pressure sores, spinal cord injury and circulatory, lower extremity or mobility disabilities, including people who use wheelchairs or mobility scooters. It is designed for users that require moderate to high positioning support and offers pressure distribution relief. The Supreme Cushion has a base layer of high-density polyurethane support foam with leg troughs and abductor contourin

Private Practice Vibration Reminder Disk (Model 1173)

The Private Practice Vibration Reminder Disk, model 1173, is a timed reminder signal designed for use with individuals with cognitive disabilities. This disk, which can be worn inconspiculously on the body in the included skin Pouch-Patch, clipped on clothing, worn on a wrist strap, or placed in a pocket, can be set to vibrate every 30 minutes or every one, two, or three hours as a reminder to take medication, change position, or perform therapeutic activities.

Pro Custom Cushion (Models Sc3022 & Sc3023)

The Pro Custom Cushion, models SC3022 and SC3023, is a foam and gel cushion and pelvic stabilizer designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This cushion has moderate to high positioning and pressure relief features, and can be customized to meet specific positioning requirements. The Pro Custom Cushion has a high resiliency foam base with a pommel and side wedges providing strong pelvic stability and leg po

Pro Forma Matrix Wheelchair Seating And Positioning

Pro Forma Matrix Wheelchair Seating and Positioning are custom wheelchair back and seat supports designed for use by individuals who use wheelchairs. This system offers offers total body contouring and wheelchair backs is light and strong, making custom wheelchair seating and positioning quicker and easier. The Pro Forma Matrix can be fitted to a wide range of users as preformed Direct Wheelchair Backs or Full Body Wheelchair Seating. The Pro Forma Matrix is supplied as rectangular sheets, pre-f

Pro-Form

Pro-Form is an air and foam flotation seat cushion with a contoured base designed for use in wheelchairs by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This wheelchair seat cushion has a deep ischial pan, high laterals, and a flexible hinge, and its base can be custom cut to fit individual needs. Possible alterations to the base include cutting down, split seats, and cutouts. The closed-cell foam base does not absorb liquid or bacteria, even afte

Procontour Comfort Cushion

The ProContour ComforT is an air floatation seat cushion designed for use by individuals with severe physical, mobility, or lower extremity disabilities, pressure sores and/or ulcers, and spinal cord injuries. The cushion reduces seat interface temperature, helping to avoid tissue maceration, and pressure sores. As the individual seated on the cushion moves, the cushion adjusts itself to eliminate pressure peaks and provide even, stable support. The seat absorbs excess heat from the user, thus

Profile Sitting Orthosis

The Profile Sitting Orthosis is a wedge foam seat cushion designed to minimize ischial tuberosity pressure. The construction encourages modified anterior pelvic tilt and, consequently, an upright sitting posture, and reduces slouching that can result from using a sling seat style wheelchair without modification. Ischial pressure is relieved by contouring and shaping the rear of the cushion. A pressure distributing layer of T-Foam (see separate entry) interfaces between the shaped cushion and the

Protac Ball Cushion

The Protac Ball Cushion is a sensory cushion designed to provide balance and sensory motor training to people who have difficulty sitting still due to concentration disorders, balance disorders, or sensitivity disorders. The cushion, which is made of polyester/cotton and filled with plastic balls, has a non-skid material sown on its back to prevent the cushion from sliding off the seat. When a person sits on the Ball Cushion, the cushion’s flexibility prompts the individual to move beyond his or

Protac Sensit

Protac SenSit is a sensory chair designed to stimulate the senses while simultaneously calming the body. The chair contains plastic balls in the seat, back and side cushions, and polystyrene balls on the bottom of the chair and in the neck cushion. Additionally, the cushions on either side of the chair (which are filled with plastic balls) are long enough that they can be positioned over the body. When an individual sits in the chair, the plastic and polystyrene balls press against the body’s pr

Public Aid Tray (Models 33050, 33051, 33052, & 33053)

The Public Aid Tray is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): Model 33050 fits 12-inch chairs and is 18 x 19 inches with a 12-inch wide torso cutout. Model 33051 fits 14-inch chairs and is 20 x 20 inches with a 13-inch wide torso cutout. Model 33052 fits 16-inch chairs is 22 x 21 inches with a 14-inch wide torso cutout. Model 33053 fits 18-inch wide cha

Pudgee Orthopedic Pads & Large Pudgee Orthopedic Pads

Pudgee Orthopedic Pads and Large Pudgee Orthopedic Pads are foam cushions of visco-elastic gel-foam with open-cell structure and a soft, doughlike consistency. The material is designed to mold exactly to the body contours with very low tension/shear force, and it provides flotation properties usually found only in pure silicone gel pads. The pads are designed to be used as top layer on another cushion, on car seats, or regular furniture. Pudgee pads are most effective in the prevention and treat

Q-Gel Wheelchair Cushion

The Q-Gel Wheelchair Cushion is a gel and foam cushion designed for use by individuals who use wheelchairs. This cushion features high-density two-ply foam construction. A built-in four-chamber gel pad keeps gel in the area of highest pressure and the fluid gel is covered in a supple bladder for maximum pressure relief. The cushion is covered in specially-formulated StaphChek vinyl. DIMENSIONS (WxDxH): 18 x 16 x 2 inches or 16 x 16 x 2 inches.

Quad Care Attaching System (Model 31878)

The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta

Quick Clamp.

Mounting clamps for removing solid wheelchair seat and back. Attach to wheelchair frame. Keeps wheelchair seat and back securely in place. Twist the lock and both seat and back slide out to fold the wheelchair. Black finish. Available in 3/4 inch, 7/8 inch or 1 inch sizes. .

Quick Release Back (Model 102-7000)

Solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. Bracket has a latch that pivots for easy quick release. Comes with multi-adjustable brackets. Backs are cut to fit between the rails.

Quick Release Hardware Kits

The Quick Release Hardware Kits are silver or black chrome plated hardware sets for mounting seat or back accessories to 7/8- or 1-inch tubing wheelchair frames. The kits include frame clamps with lugs, quick release brackets with spring-loaded knobs, and T-nuts and bolts for mounting to solid seat or back panels. Components may also be ordered separately.

Quick Release Seat (Model 101-7000)

Solid seat, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. The bracket has a latch that pivots for easy quick release. Seat comes with multi-adjustable brackets. Seats are cut to fit between the rails.

R & H Floor Sitter (Models K8Fs & K9Fs)

Floor sitter with padded right angle seat to support head and torso, maintaining leg extension. Y-strap, leg abductor, chest strap, six leg straps, two hip pads, two head support pads standard. Includes tilt blocks to recline entire seat. Fabricated of birch plywood and hard maple. Stain and mildew resistant pads with vinyl covers in blue or brown. Pads snap off for easy cleaning. Optional trays available: 12 by 19, or 16 by 24 inches. K8FS small, 24 inch back height, 28 inch base length. K9FS m

Recaro

Recaro is a car seat designed for use with children weighing 9-36 kilograms with balance, neurological, or other physical disabilities. It is made out of an aluminum frame and offers additional contoured seat padding, lateral support and adjustability. Additional features include anatomical seat padding with leg support and an adjustable back height and seat depth. The width of the shoulder pads is adjustable and it comes with a standard 5-point safety harness with simplified central adjustmen

Reclining Arms (Models 07-A & 07-B)

Arms attach to backpost of reclining wheelchair to maintain a position relative to the position of the body when reclined. Allows chair controls to move with the arms during the recline. LaBac Systems arm troughs and pads can be mounted on the arms. Arms are strong enough to hold a lap board. Model 07-B ($395) features a quick release mechanism which allows instant removal of armrests.

Reflection Custom Contoured Cushion

The Reflection Custom Contoured Cushion is a contoured seat cushion designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Each cushion is custom-made based on a foam or plaster mold of the user's body made using a molding frame, and completed to the user's specifications. These cushions can be supplied with a Vinyl cover or naked with a removable cover in several different colors. Other available features include mounting pans, extra depth, and side

Reflection Planar Simulator (Model Pss-98)

The Reflection Planar Simulator, model PSS-98, is a seating simulator designed for use in evaluating planar seating and positioning options for individuals with lower extremity or mobility disabilities or spinal cord injury. This simulator can be used for evaluation of seated posture, evaluation of function, education of best posture, and documentation of optimal posture. The system is mounted on a reinforced Luv-Base, and includes three pairs of lateral pads and mounting brackets; one pair of a

Rehab 1 Cushions (Models N1102, N1103, & N1104)

Rehab 1 Cushions are foam seat cushions designed for use in wheelchairs. Made of high-density polyurethane foam, these cushions provide firm seating and pressure relief and come with a zippered cover. DIMENSIONS: Model N1102 is 2 x 16 x 18 inches, model N1103 is 3 x 16 x 18 inches, and model N1104 is 4 x 16 x 18 inches. COLOR: The cover is black.

Relax Duogel Sentinel Wheelchair Cushion

The Relax DuoGel Sentinel Wheelchair Cushion is a gel and foam wheelchair cushion designed for use by individuals who use wheelchairs. This cushion features an anatomically-shaped foam base and combination of Trugel and Flogel for pressure relief. DIMENSIONS(WxDxH): 14 x 14 x 4 inches, 15 x 15 x 4 inches, 16 x 16 x 4 inches, 16 x 18 x 4 inches, 18 x 16 x 4 inches, and 18 x 18 x 4 inches. WEIGHT: 5 pounds. CAPACITY: 300 pounds.

Relax Pleezrelite Wheelchair Cushion

The Relax PleezrElite is a foam and gel wheelchair cushion designed for use by individuals who use wheelchairs. This cushion has a Recovery 5 top with soft, stretchy, fluid-proof antifungal, antibacterial fabric. The cushion also has a Memory Foam Comfort Zone under the Ischial Tuberosities with a semi-solid layer of Xcelgel direct-poured into the middle. The design includes contoured edges and a low profile pommel to support the pelvis and lateral and medial thigh areas. DIMENSIONS(WxD): 16 x 1

Relax The Back Gel Seat Cushion

The patented, portable Gel Seat combines a gel cushion with a memory material base to disperse weight and relieve strain on your spine and soft tissue. The center groove elevates the tailbone, eliminating the point of contact that causes direct pressure on the spine. The unique wedge design promotes proper lumbar curvature while you're seated, so users can sit longer and stay free from fatigue and discomfort. Folds up for compact travel. DIMENSIONS: 13.5 inches depth X 16 inch width. COLOR: Blac

Relax Xcell Wheelchair Cushion

The Relax XCell Wheelchair cushion is a gel flotation cushion designed for use by individuals who use wheelchairs. This cushion has a non-slip base, and the no-memory pressure-relieving gel contours to the body and increases the surface area. The Quad Gel Pack configuration provides even distribution of no-memory gel. An incontinence cover is included. DIMENSIONS(WxDxH): 16 x 16 x 3 inches, 17 x 17 x 3 inches, 18 x 18 x 3 inches, 18 x 16 x 3 inches, or 20 x 18 x 3 inches. WEIGHT: 6 to 8 pounds.

Relaxo-Bak Comfort Seat

Relaxo-Bak Comfort Seat is a back support cushion designed for use by individuals with back pain. This form fitting plastic auxiliary seat, can be used over any soft seat for added firmness. Allows body weight to be carried on the lowest part of the pelvis. Pressure is taken off the coccyx to prevent switching and tightening of the back muscles. Molded plastic, recessed at spinal end to protect coccyx. COLORS: Black, Gray, Tan, Burgundy, Off-White, or Sky Blue.

Remedease Full Height Backrest (Model 71301)

The Remedease Full Height Backrest, model 71301, is a foam back cushion designed for use to add back support to any chair. This over-sized backrest contains high-density medical-grade, anti-allergenic foam that keeps its shape to support the user for long periods of time. An elastic strap on the cushion adjusts to fit any chair and holds the backrest firmly and securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover. DIMNESIO

Remedease High Profile Backrest (Model 71491)

The Remedease High Profile Backrest, model 71491, is a foam back cushion designed to add lower back support to a work chair. This cushion supports the user's lower back with high-density, anti-allergenic foam that keeps its shape. The cushion's elastic strap adjusts to fit any chair and holds the cushion securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover, DIMENSIONS (HxDxW): 13 x 4 x 12.75 inches. WEIGHT: 1 pound. COLOR:

Remedease Lumbar Roll (Model 71101)

The Remedease Lumbar Roll, model 71101, is a lumbar support and foam back cushion designed to reduce back strain. This high-density foam cushion attaches to the back of a chair and provides direct support to the user's lumbar area. Its high-density anti-allergenic foam keeps its shape for long periods of time. An elastic strap adjusts to fit any chair and holds the backrest firmly in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cove

Resident-Release Three-Point Wheelchair Belt (Models 610210 & 610215)

The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.

Retractable Headrest System (Models 06-1 & 06-1S)

Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding

Retroback

The Retroback is a foam wheelchair back support designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. This cushion is lightweight and durable and is equipped with a chrome-plated steel clip that attaches to the existing sling upholstery. Removing the Retroback is done by simply lifting it off the upholstery. The cushion also features a nylon/polyester water-resistant, machine-washable cover. DIMENSIONS: Available in 16, 18, or 20 inch

Reversible Gel Seat Cushion

The Reversible Gel Seat Cushion is a gel flotation seat cushion designed for use in chairs, wheelchairs, or cars during periods of extended sitting. This reversible cushion features a gel-foam core inside two layers of high-density foam. A fluidproof, bacteria-resistant, antistatic cover is included. DIMENSIONS: Available in 16 x 16 inches or 16 x 18 inches.

Rifton Advancement Chair (Models R901, R902, & R903)

The Rifton Advancement Chair is a modular seating system that promotes functional sitting for individuals with physical or neurological disabilities. This chair provides total support for people with little motor control or muscular strength. As sitting skills and strength are gained, this modular chair can be configured for decreased support. Adjustable arm prompts accommodate variable positioning, and assist in supporting posture for users that are unable to hold themselves upright for periods

Rifton Compass Chair (Models E310, E320, E330, E340, & E350)

The Compass Chair is an ergonomic posture chair designed to provide support and positioning for children with mild physical disabilities. The armrests are high enough to provide upper body support and encourage self-supportive sitting, yet short so that the chair can be brought right up to a table or desk. The "hug" feel of the circular armrests provides a sense of security and boundary and enables the child to concentrate. The ergonomic curves of the Compass Chair promote correct posture. OPT

Rifton Corner Floor Sitter (Models E610 & E620)

The Corner Floor Sitter is a floor corner chair designed for use by children with balance, neurological, or lower extremity disabilities. Designed to provide positioning for children who need trunk support while sitting on the floor, this chair is made of laminated hardwood and has a padded, three-sided back, an adjustable hip strap, and a padded chest strap that can be placed at varying heights. Stabilizers assure a secure, non-tip base. OPTIONS: Abductor. SIZES: Model E610 is small and model E

Rifton Low Back Mobile Chair (Models R622 & R623)

The Low Back Mobile Chair is a positioning chair designed for use by children with neurological or physical disabilities who need lower body support. Both models include the mobile chair frame with either tilt or tilt and seat spring action, low backrest and a push handle, pads, armrests, and footboard and sandals. The seat is height- and depth-adjustable. The chair features a contoured seat and angle-adjustable backrest with pads, a hip strap that clips into the chair at a variety of positions

Rifton Stationary Chair Large (Model R613)

The Rifton Stationary Chair, model R613, is a positioning chair designed for individuals 53 to 72 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of the low backrest with armrests and pads or the high backrest with ar

Rifton Stationary Chair Medium (Model R612)

The Rifton Stationary Chair Medium, model R612, is a youth positioning chair designed for use by individuals 42 to 55 inches tall with mild physical or neurological disabilities. Intended for individuals who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame, and a choice of a low backrest with armrests and pads or a high

Rifton Stationary Chair Small (Model R611)

The Rifton Stationary Chair Small, model R611, is a youth positioning chair designed for children 36 to 46 inches tall with mild physical or neurological disabilities. Intended for children who can walk with assistance and do not need a chair on wheels, this chair enables the child to sit properly positioned with feet on the floor (or with the footboard at floor level). The Stationary Chair comes with the chair frame and backrest with armrests and pads. The seat depth is adjustable, and there is

Rifton Toddler Chair (Models E760, E770, & E780)

The Rifton Toddler Chairs are positioning chairs designed for use by children with physical or neurological disabilities. Made of solid maple, these chairs are designed to encourage normal posture while discouraging abnormal patterns. The calf rest swings and locks at the desired angle for varying degrees of knee flexion. The footrests adjust separately for vertical height position, and can pivot out of the way to facilitate transfers. All models include a hip strap. OPTIONS: Tray, suction cup

Righting Device For Juvenile.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to provide feedback for person having difficulty keeping head upright. A mercury switch is attached to the user's head in the desired "on" position. The switch is attached to a control box. Any 110 volt appliance such as a radio is plugged into the control box and the device turns off when the head moves from the desired position and the switch is no longer in the on position. SKILLS REQUIRED: Electronics. AUTHOR: TITLE: Cerebral Palsy Research

Righting Device For Juvenile.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device encourages a child with cerebral palsy to hold head upright by turning on a television set or radio when the head is in the desired position, and turning it off when the head tilts forward. Control box with an electrical outlet switchable by a mercury contact switch is attached to a child's head so that holding the head upright or tilting it forward turns a radio or television on or off. Includes photograph. COMMENTS: For further information con

Rigid Pelvic Stabilizer

Rigid bar with relief area in center for bladder. Padded for comfort. Quick release locks on each side. Small for 12 and 14 inch widths, large for 16 and 18 inch widths.

Ring Cushion

The Ring Cushion is a foam ring seat cushion designed to relieve pressure for individuals who have difficulty sitting for long periods. The foam is flame retardant. The cushion is not recommended for people who are susceptible to pressure sores. DIMENSIONS: The exterior diameter is 17 inches and the interior diameter is 5 inches; the height is 2.5 inches.

Risedale Powered Lift Chair

The Risedale Powered Lift Chair is a wing back chair that aids in lifting up a sitter to a standing position. Only the seat cushion rises and lowers for discreet assistance, and the compact size allows it to be placed in smaller rooms. The chair provides 100 percent of the lift for those up to 300 lbs. The cushion does not push a user forward and the legs are height adjustable for user comfort.

Roadrunner Mobility Base

The Roadrunner Mobility Base is a base for a child's car seat designed to convert the Snug Seat 2 or the Gorilla Car Seat (see separate entries) into a stroller. A moveable rear crossbar provides a choice of five fixed positions for tilt-in-space seating. FRAME (WxLxH): Folding tubular steel frame with a powder coat finish and a foam padded push handle. The frame is 26 x 31 x 40 inches open and 26 x 31 x 13 inches folded. The frame offers a choice of 94, 100, 106, 111, or 115 degrees of tilt. BR

Rodeo 12 / 14 / 16

The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment.

Roho Airlite Cushion

The Roho AirLite Cushion is an air flotation cushion designed for use in wheelchairs. This cushion features a contoured foam base and a sealed air pad. A skid-resistant rubber bottom provides security. A moisture-resistant nylon spandex cover is included. DIMENSIONS: 18 x 16 inches. WARRANTY: Two-year limited warranty.

Roho Contour Base

Molded ABS plastic base with front pommel to encourage leg abduction, 7 degree slope from front for anti-thrust effect, 13 degree side to side slopes to center hips, to be placed under any Roho Dry Floatation Cushion. Weighs approximately 1 pound. Available in 3 standard sizes: 15 inches by 15 inches, 16 inches by 16 inches, 16 inches by 18 inches. Custom sizes available. 18 month warranty.

Roho Cushion Covers

Cushion covers made of two way stretch blended material. Machine washable. Sized to fit all Roho cushions as specified. Available in maroon, gray, and black with Roho logo, or plain black. .

Roho Cushion Retainer

Nylon mesh and webbing device fastened into existing wheelchair seat and back upholstery screw locations to keep cushion from sliding back on seat. Adds very little weight to chair. Designed to fit most standard size wheelchairs.

Roho Enhancer Dry Floatation Cushion

Neoprene rubber air cushion with two valves and individual air cells varying from 1 inch to 4 inches in height, distributed in pattern to provide contoured support and increased seated stability. Pressure can be varied separately between cells under thighs and ischia and cells between and around legs and buttocks. Available in 4 standard sizes: 15 inches by 15 inches, 15 inches by 16 3/4 inches, 16 3/4 inches by 16 3/ 4 inches, and 18 1/2 inches by 16 3/4 inches. Custom sizes available. Removeab

Roho High-Profile & Low-Profile Dry Flotation Cushion

Roho Dry Flotation cushions are air flotation cushions designed for use in wheelchairs. These cushions are lightweight and consist of flexible air cells attached to a common manifold system. A pump and cover are included. DIMENSIONS: The High-Profile Cushion is four inches high and the Low-Profile Cushion is 2 inches high. The cushions are available in 15 x 16.75 inches, 15 x 15 inches, and 16.75 x 16.75 inches. WEIGHT: The High-Profile Cushion weighs 6 pounds and the Low-Profile Cushion weighs

Roho Hybrid Elite Cushion

The ROHO Hybrid Elite is a therapeutic cushioning device designed for use by individuals with moderate to high risk for skin breakdown. The neoprene Dry Floatation insert provides an adjustable, reduced friction environment that helps prevent pressure ulcers from forming. The cellular design positions and aligns the protuberances of the pelvis to redistribute the pressure evenly across the lower trunk. This glove-like fit conforms to the user's specific shape correcting imbalances and efficientl

Roho Low Profile Dry Floatation Cushion

Roho Low Profile air flotation seat cushion designed for active individuals in potential ulcer risk situation who need a more stable cushion with easy transfer capabilities. Standard sizes: 16 3/4 by 18 1/ 2 by 2 inches, 16 3/4 by 16 3/4 by 2 inches, 15 by 15 by 2 inches, and 15 by 16 3/4 by 2 inches. Balloon structure same as standard Roho seat cushion, but shorter balloons.

Roho Ltv Seat Cushion

The Roho LTV Seat Cushion is an air flotation seat cushion designed for use by individuals who use wheelchairs or scooters or who sit for long periods. This cushion can be used in office or home chairs, in stadium seating or cars, and in wheelchairs and scooters. Designed to be lightweight and portable, this cushions folds when not inflated. This cushion features dynamic air chambers that allow air to shift between cells, to better contour to the user's shape. It automatically adjusts to movemen

Roho Mini Max Cushion

Neoprene rubber air cushion with 1 1/4 inch high flexible air cells attached to a common base. Standard sizes are 15 inches by 15 inches, 16 inches by 16 inches, and 16 inches by 18 inches. Custom sizes available. Available with rigid plastic contoured base and removeable two way stretch cover. Weighs approximately 24 ounces.18 month warranty.

Roho Pack It

Lightweight neoprene rubber air cushion made of Mini Max cells, which are 1 1/4 inch high flexible air cells. Standard size is 16 inches by 9 1/2 inches, but can be customized to fit any size requirements. Encased in removeable two way stretch cover with elastic strap. Weighs approximately 1 1/4 pounds. 18 month warranty. Can be used for scapular, sacral, lumbar support, in shower or bathtub, automobile, airplane. Designed for lightweight travel use.

Roho Quadtro Cushion

Four separate neoprene rubber air cushion sections joined together by hose connector system allowing separate inflation adjustments. Available in high profile, with 4 inch high cells, in 3 sizes: 15 inches by 15 inches, 15 inches by 16 3/4 inches, and 16 3/4 inches by 16 3/4 inches; or low profile, with 2 inch high cells, in 4 sizes: 15 inches by 15 inches, 15 inches by 16 3/4 inches, 16 3/4 inches by 16 3/ 4 inches, and 16 3/4 inches by 18 1/2 inches. Custom sizes and compartments available. Re

Roho Universal Cushion Cover With Pocket

The Roho Universal Cushion Cover with Pocket is a cushion cover with under seat pocket designed for use by wheelchair users. The cover has a durable stretch Lycra top and the side material is three-layer knit polyester spacer fabric which provides air circulation and cools the user. The attached pocket can be used to store small items such as wallets, keys, glasses, or coins. DIMENSIONS (HxWxD): Available dimensions range from 11 to 18 x 11 to 18 x 1 to 4 inches. WARRANTY: 6 months.

Roho Wedge Cushion

Neoprene rubber air cushion with air cell heights of 2 inches, 3 inches and 4 inches varying from front to back for wedge shape. Available with single, dual, or triple valves for varying pressure. Custom sizing to fit user specifications. Weighs approximately 4 pounds. Removeable two way stretch cover. 18 month warranty.

Roho Wheelchair Recliner

Neoprene rubber air cushion with back and seating surfaces connected for use in reclining wheelchair. Sections constructed independently according to user specifications, which include standard or custom cushion designs, varying cell heights, multiple valves, or other custom techniques.

Roll And Go Seat Cushion (Model Wg-Rg-001)

The Roll and Go Seat Cushion, model WG-RG-001, is a gel seat cushion designed for use by individuals who sit for long periods in a wheelchair, including individuals with burns, pressure sores, lower extremity or mobility disabilities, or spinal cord injury. The unit is made of supportive and pressure relieving WonderGel, which consists of hollow columns of a gel called Gelastic, a solid rubber-like material. The columns form a pattern similar to a honeycomb, which redistributes and equalizes pr

Roll Chairs (Models 1750 & 1751)

The padded roll (or bolster) helps the individual maintain proper hip abduction and prevents "scissoring" of the legs. The chrome plated steel front and rear legs may be adjusted to various angles. Two different chair sizes are available, Model 1750 is for children from 42 to 50 inches tall and Model 1751 is for both children and adolescents up to 68 inches tall. Seat belt is included. OPTIONS: Adjustable Lateral Supports and Clear Acrylic Tray. COLOR: Chestnut is standard. Other available color

Roll Chairs (Models T3545 & T3555)

Roll chair with back. Maintains hip and trunk flexion and leg abduction. Features: independent adjustable height front and rear legs offering range of seat angles; adjustable back height; deep roll seat; quick release seat belt. Model T3545 fits children to 50 inches tall; 8 inch diameter, 18 inch long roll seat; seat height and adjustment from floor 8 to 16 inches; back 12 inches wide by 16 inches high. Model T3555 fits children 45 to 68 inches tall; roll seat 10 inches in diameter; 22 inches l

Roller Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Tubular chair with a straight back allowing a child with spastic cerebral palsy to sit with legs apart and feet flat on the ground. Chair made of plywood and hardboard. Two 8 by 8 pieces of wood rounded at the top are joined by 3 struts, two on the bottom, one on top. A piece of plywood 15 1/2 by 20 inches rounded at the top is screwed to the back. Hardboard (14 by 21 1/ 2 inches) is soaked overnight then bent over frame and tacked into place. A 1 by 1

Rolyan Temper Foam (Models A4881 To A4883)

The Rolyan Temper Foam, models A488-1 to A488-3, is open-cell foam material designed for use with splints. This durable, soft slow-recovery foam is aided in molding by body heat. Models A488-1 and A4882 are medium density and model A488-3 is soft density. Model A 488-2 is a plain-backed sheet and the other models have self-adhesive backing. DIMENSIONS: The self-adhesive sheets are 3/8 x 16 x 24 inches. The plain-backed sheet is 1 x 16 x 24 inches. COLOR: Models A488-1 and A488-2 are blue and mod

Rolyan Cervical Roll (Model A818301)

The Rolyan Cervical roll, model A818301, is a neck pillow designed to assist with cervical spine alignment for persons with cervical pain and stress. This foam roll is wrapped with a cotton cover and helps to encourage proper neck flexion. It can be machine washed and dried. DIMENSIONS: (Length x Width) 18 x 4.25 inches.

Rolyan Foam Padding (Model A7931)

The Rolyan Foam Padding, model A7931, is foam material designed for use with splints. This open-cell foam comes in sheets with self-adhesive backing. DIMENSIONS (TxWxL): 0.5 x 12 x 12 inches. COLOR: White.

Rolyan Knee Separator (Model A513300)

The Rolyan Knee Separator, model A513300, is designed for use by individuals with lower extremity disabilities. Available with a choice of a polyester cover or a vinyl coating, the wedge fits between the user's legs and a wide strap fits over the thighs to secure the wedge and distribute pressure over the thighs. DIMENSIONS: The wedge positions the thighs 4 inches apart. The strap is 46 inches long.

Rolyan Kushionflex Padding (Models A4551, A455002, & A455003)

Rolyan Kushionflex Padding is firm closed-cell foam material designed for use with splints. This washable foam cuts easily, resists bottoming out, and can be applied to splints prior to immersion in water. Models A455-1 and A455-002 have an adhesive backing and model A455-003 has a non-adhesive backing. DIMENSIONS: Model A455-1 is 1/8 x 17.75 x 24 inches and models A455-002 and A455-003 are 0.5 x 17.75 x 24 inches.

Rolyan Low Tack Polycushion Padding (Models A2913 & A2914)

Low Tack Polycushion Padding, models A291-3 & A291-4, is foam material designed for splints that require padding changes. This closed-cell foam is designed to peel off after application without leaving a sticky residue. DIMENSIONS: Model A291-3 is 1/8 x 17.75 x 24 and model A291-4 is 0.25 x 17.75 x 24 inches.

Rolyan Polycushion Padding (Models A2911 & A2912)

Polycushion Padding, models A2911 & A2912, is foam material designed for padding thermoplastic splints or for general padding designed for use by individuals who are hypersensitive to heat or pressure. The washable, self-adhesive closed-cell foam material can be cut with scissors and can be applied to splints prior to immersion in water. DIMENSIONS: Model A291-1 is 1/8 x 17.75 x 24 inches and model A291-2 is 0.25 x 17.75 x 24 inches.

Rolyan Slide-On Adjustable Lap Tray (Model A707001)

The Rolyan Slide-On Adjustable Lap Tray, model A707001, is a molded-plastic lapboard designed for use by individuals who use wheelchairs. This tray is equipped with bases that fit over the upholstered armrests of a wheelchair to help prevent tipping. The tray is designed to fit wheelchairs from 16 to 20 inches wide with standard or desk-length arms. The bases can be adjusted to fit with an allen key. OPTIONS: Back strap, model A3173. DIMENSIONS (WxD): 23.5 x 21.5 inches

Rolyan Strap Pads

Rolyan Strap Pads are foam strap padding designed for use in splinting. These hand-washable pads are made of foam laminated to loop material on both sides and have openings into which strap ends slide to distribute pressure and increase comfort. DIMENSIONS (WxL): 2 x 3 inches or 2 x 4 inches. The pads are 0.25-inch thick and accommodate 1- or 1.5-inch wide straps.

Rolyan Super Strap Ii Strapping Material (Models 755701, 755702 & 755704)

Rolyan Super Strap II Strapping Material, models 755701, 755702 & 755704, is foam strapping material designed for use with splints. This material features non-fraying knitted loop fabric, .25 inch thick breathable foam, and soft tricot backing. Both sides mate with hook material. This non-stretchable, hypoallergenic material is latex free and washable. DIMENSIONS (WxL): Model 755701 is 1 x 10 yards, model 755702 is 2 x 10 yards, and model 755704 is 4 x 10 yards.

Rolyan Synthetic Sheepskin Pad (Models 4086-01 & 4086-02)

The Rolyan Synthetic Sheepskin Pad, models 4086-01, and 4086-02, is a synthetic sheepskin bed pad designed to help prevent pressure sores. The hypo-allergenic, machine-washable pad is soft 100 per cent polyester pile. DIMENSIONS: Model 4086-01 is 24 x 30 inches and model 4086-02 is 30 x 40 inches.

Rolyan Wedge Flex Abduction Pillow

The Rolyan Wedge Flex Abduction Pillow, is an abductor designed for use by individuals with lower extremity disabilities. This open-cell foam wedge fits between the user's legs to provide hip abduction and can be used while seated or lying down. A slit in the foam allows knee flexion and a hand strap, which slips through slots in the wedge and controls the amount of flexion allowed. The hand strap also aids in positioning the wedge. The knee flexion slit can be modified to permit greater flexion

Rolyan Workhard Back Support (Models A81831 To A81835)

The Rolyan Workhard Back Support, models A81831 to A81835, is a heavy duty lumbar support aid designed to act as a preventive measure for persons with low back pain. With double waist strapping, it is constructed to provide both lumbar and adominal support. This brace also features adjustable shoulder straps and is not designed to constrict the user's daily activities. DIMENSIONS: Measure around waist - do not use pant size. Model A81831 - Small is 26 to 30 inches wide; Model A81832 - Medium is

S.o.f.t. Headrest System (Models Soft-1, Soft-2, Soft-3, Soft-4, & Soft-5)

The S.O.F.T. (Sub Occipital Formed Three-piece) Headrest System is a head and neck support designed to provide lateral cervical support. The device consists of a rear occipital pad and two sub occipital pads curved to allow ear clearance and to prevent "hooking". Each of the 3 components is independently adjustable. The support system also features ball and socket adjustments to provide an additional plane of movement. The total unit is attached to a height adjustable rod that is attached to the

Sacral Dish

The Sacral Dish is a back support cushion designed for use in wheelchairs by those who in wheelchairs who are at risk for sacral coccygeal pressure ulcers. This cushion's semi-rigid base and unique shape provide a supportive foundation to fill in the chair's back upholstery while offering pressure-free ventilated protection of the sacrum. The support straps to the existing seat back and can be used alone or with the ISCH-DISH (see separate entry) or other seating products. This support comes com

Sacro Ease (Models Bwc, Bwcs, Wc & Wcs)

The Sacro-Ease, Model BWC, BWCS, WC and WCS, seat supports are designed to provide individuals in a wheelchair support under the hips and behind the lumbar spine. Models BWC and BWCS feature a backrest that clamps to wheelchair upright. Models WC and WCS are seats only. The seat supports for all models are made of two one-inch polyfoam cushions with steel frame and latex rubber support bands between the layers of foam. The foam is covered with a removable, washable and waterproof cover. The diff

Sacro Ease (Models Rcrx, Rscrx, Rncrx, Brc-Rx, Brsc-Rxm & Brnc-Rx)

The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with th

Sacro Ease Keri Back Cushion (Models Kbt & Kbn)

The Sacro Ease Keri Back Cushion, models KBT and KBN, is a back support cushion designed to reduce back fatigue, ease lower back pain for individuals who have back injuries or posture problems. Designed for taller users, this back support cushion has a steel frame, rubber and 1 inch of memory foam in the back. It is bendable for additional support and has a four way strapping system to fit most office chairs and car seats. DIMENSIONS (HxW): 18 x (15 or 12) inches. WEIGHT: 5 pounds. COLORS: Bla

Sacro Ease Sports Portable

The Sacro-Ease Sports Portable is a seat and back support designed for use at spectator sports events. The seat support may be used with or without the existing backrest. The seat closes to be carried like a briefcase. The seat support is manufactured with .5 inch of polyfoam on top of a bendable carbon steel frame with rubber supports. The upholstery is water-resistant fabric. The back support has a built-in lumbar support pad. The Sports Portable has a non-skid bottom, and it is available with

Sacro Ease Standard (Models Br, Brsm & Brn)

The Sacro Ease Standard, models BR, BRSM and BRN, is a back support cushion are designed for office chairs and auto and truck bucket seats with existing firm bottoms. This product features a seat bottom and backrest with adjustable lumbar pad on a foldable steel frame with rubber strap supports and a non-skid bottom. The Sacro Ease Standard provides support under the hips and behind the lumbar spine. The units are designed to fit to the individual and not the seat, thus the unit can be moved fro

Saddle Complete Seat

The Saddle Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat drop seat and a Saddle Cushion. The adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform.The cushion also features a

Saddle Cushion, The

The Saddle Cushions are foam, wedge foam, or foam and gel seat cushions designed for use in wheelchairs. Available with or without QuadraGel, these cushions are available in a wedge model that is lower in the back than in the front to prevent the user from sliding or thrusting forward, or in a Zero Elevation model that is the same height throughout. The cushions also feature rounded bottoms to prevent hammocking. The cushions have two layers of HR foam for comfort and a firm bottom layer for sup

Safe•t Mate Drop Seat With Integrated Alarm (Model Sm-007)

Safe•T Mate Drop Seat with Integrated Alarm, model SM-007, is a wheelchair drop seat base and wandering patient system designed for use by wheelchair users with Alzheimers disease or cognitive disabilities. This system combines a solid drop-seat with a rugged, detachable 95- decibel alarm with automatic reset. DIMENSIONS: The drop seat is 3/8-inch thick and fits chairs from 16 to 22 inches wide. WARRANTY: Limited lifetime guarantee.

Safety-Soft Security Belt (Models Mdt822125 & Mdt822126)

The Safety-Soft Security Belt is a wheelchair seatbelt designed for use by individuals with cerebral palsy, mobility or neurological disabilities, or spinal cord injury. This seatbelt helps keep wheelchair users upright. The belt has a polyester strap with a thick foam lining to reduce friction on the user's hips. It has bar tacks at stress points and is washable. The one-piece style (model MDT822125) is a single piece of foam that ties behind the back. The two-piece style (model MDT822126) has

Sammons Preston Arm Tray With Foam Elevator (Model A7464)

The Arm Tray with Foam Elevator, model A746-4, is a plastic arm support and trough for use by people with upper extremity disabilities who also use wheelchairs. The unit includes a washable soft foam insert for cushioned elevation that can be trimmed and customized for individual needs. The tray includes straps for attaching the arm tray to the wheelchair. OPTIONS: Replacement foam inserts, model A746-5, are available for use with this or other Smith & Nephew Arm Trays.

Sammons Preston Closed-Cell Carve-It Foam (A50763)

The Sammons Preston Closed-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This foamm can be cut with an electric knife to be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 24 x 36 x 2 inches.

Sammons Preston Economy Wedge Cushion (Model 6485)

The Sammons Preston Economy Wedge Cushion, model 6485, is a foam cushion designed for use by individuals at risk for pressure sores/ulcers or who are prone to sliding out of their wheelchair or other chairs. This cushion can be positioned with high part in front to prevent sliding, or in back to assist persons with difficulty rising. DIMENSIONS: The 16.5 inch square cushion slopes from 4.5 to .75 inches.

Sammons Preston Elevating Arm Tray Kit

The Sammons Preston Elevating Arm Tray Kit is an arm trough and arm posiiitioner designed for use by wheelchair users who must keep one arm elevated. The tray straps to right or left standard or desk-length wheelchair arms with Velcro and includes a washable foam insert contoured to keep the users arm in the proper position. The unit can be cut to the desired length. OPTIONS: An extra pair of foam elevating inserts ($18.95). DIMENSIONS (LxW): 22 x 4.5 inches. COLOR: The foam is light beige.

Sammons Preston Geri Chair Side Support

The Geri Chair Side Support is a lateral trunk support designed for use with individuals with balance disabilitieis. Intended for use in geriatric chairs, the unit is hinged for use in reclining chairs. Made of closed-cell foam, the support can be modified with an electric knife, can be used on the right or left side, and is secured by attached wrap-on material. The support can be used only on one side or on both sides. OPTIONS: Short or long torso support insert and hook-and-loop attachment str

Sammons Preston Modified Deluxe Wheelchair Arm Tray (Model A74612)

The Sammons Preston Modified Deluxe Wheelchair Arm Tray, model A74612, is an arm trough designed for use by individuals who use wheelchairs. Features include a cut-away attachment base designed to allow access to wheelchair brakes while supporting the full length of an arm. The tray can fit either a standard or desk arm chair, and can be used on either the right or left side. Kushionflex padding for comfort and protection is included. DIMENSIONS: The padding is 1/8 inch thick.

Sammons Preston Molded Clear Lap Tray (Model A7073)

The Sammons Preston Molded Clear Lap Tray, model A7073, is a tinted translucent lapboard designed for use by individuals who use wheelchairs. This tray enables the lower extremities to be completely visible. Made of high-impact Lexan, the tray features a molded rim and a recessed space for cups, glasses, bottles, or cans. The tray is equipped with D-ring hook-and-loop straps on the arms and a snap-buckle back strap that fastens on either side of the chair. The arm and back straps attach by threa

Sammons Preston Open-Cell Carve-It Foam

Sammons Preston Open-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This firm-density, fire-retardant foam can be cut with an electric knife and can be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 5 x 16 x 16 inches, 7 x 23 x 23 inches, or 14 x 23 x 23 inche

Sammons Preston Solid Seat Insert

The Sammons Preston Solid Seat Insert is designed for use in wheelchairs with sling seats. This semi-rigid closed-cell foam insert provides a firm, flat seating surface in sling seats. This surface also helps improve posture by helping to balance the pelvis and distribute weight over the hips and thighs. This insert is available in standard, narrow, or relaxed-fit styles. DIMENSIONS (WxD): The standard model is 18 x 16 inches, the narrow model is 16 x 16 inches, and the relaxed-fit model is 20

Sammons Preston Universal Wheelchair Arm Tray (Model A7468)

The Sammons Preston Universal Wheelchair Arm Tray, model A7468, is an arm trough designed to position and provide arm support for individuals with upper extremity disabilities who also use wheelchairs. The trough features a plastic base that slides over the arm pad of standard or desk-length wheelchair arms and is designed for either the right or left side use. A Kushionflex pad is included to protect potential areas of irritation. The tray requires no tools for installation or removal. .DIMENSI

Sammons Preston Wheelchair Elevating Arm Tray Kit (Model 6461)

The Sammons Preston Elevating Arm Tray Kit, model 6461, is an elevating armrest designed for use by individuals who use wheelchairs. Designed to fit most standard or desk armrests, this plastic tray fastens to the armrest of wheelchairs with a double D-ring Velcro Velstrap. The tray elevates to 25 degrees and can be mounted for either right or left side use. A heat gun can be used for customization. Bolts are included for elevation. DIMENSIONS (LxW): 22 x 4.5 inches. Double D-ring Velcro stra

Sammons Preston Wheelchair Foot Support (Model A7481)

The Wheelchair Foot Support, model A7481, is a foot support designed for use by people with weak, flaccid or hypertonic lower extremities who use wheelchairs. It positions the foot in proper anatomical alignment to assist in the prevention of ankle contractures. The foot portion effectively eliminates the need to continually reposition the foot and prevents feet from slipping off the wheelchair footrest. Made of rigid plastic, the support is covered to help prevent forward slippage and attaches

Sat-A-Lite

Molded polyurethane foam cushion with contoured wedge shape. Handsewn cover in blue or gray velour fabric.

Schaeffer Abduction Pillow.

The Schaeffer Abduction Pillow is a leg abduction positioner designed to maintain the legs in the desired position. The large foam wedge fits between legs and adjustable foam straps secure the wedge to the user's legs. The set also includes a pair of detachable cradle boots (see also separate entry) to protect and position feet. This device enables the user to be turned to 90 degrees to prevent sacral pressure sores. SIZES: Medium only. DIMENSIONS: 23 x 14 x 4 x 7 inches.

Schukra Adjustable Backrests

The SCHUKRA Adjustable Backrest is a back support cushion designed to help ease back pain. Providing threefold support in the pelvis, lumbar and upper body regions, this support aid adjusts to fit the user's spinal column while sitting. Adjustments are made with a small dial found at the bottom-side of the cushion. With its compact design, it can be used in the car, home or office. COLOR: Variety. WARRANTY: Lifetime - for the original purchaser.

Sciatica Saddle Pillow

The Sciatica Saddle Pillow is designed for those who deal with sciatic nerve issues, chronic back pain or experience balance problems. This pillow helps relieve pain by off-loading pressure from thighs and shifting weight back to the pelvis, where the body is equipped to take the pressure.

Scooter Armrest Extensions

CUSTOM ADAPTATION PURPOSE: To assist an individual with mobility disabilities in transferring from a scooter. The existing scooter armrests were altered so they can be moved forward to provide a point of support in front of the user during transfers and moved back at other times. The armrests are mounted on hollow square tubing, into which long slots, rather than single holes, were cut. The arms slide along the slot into the forward position for standing transfers and backward for standard use

Scottie Seating Systems

Modular seating components ($246 to $3) for custom built seating systems for wheelchairs. Allows adjustments necessitated by growth or neuromuscular control changes. Insert ($511 to $297) is compatible with variety of wheelchair frames and can be easily removed without tools for transport. Quick release swingaway abduction pommel. Velcro restraint strap. Basic insert sizes: child, narrow adult, adult, large adult. Accessories: headrest bracket, lateral support, hip support, vest, body straps, s

Seat And Back Mounting Hardware, Drop Hooks, Drop Hook Stops, Back To Seat Brackets

Complete line of seating hardware for mounting backs, seats, lateral trunk supports, abductors, headrests, leg and footrests in wheelchairs and other mobility bases. Adjustable and non-adjustable, knob-release and drop hook styles. May be ordered in complete kits or by individual components. Optional components $93.00 to $2.00.

Seat Belt Kit

The Seat Belt Kit is a wheelchair seatbelt designed for use with the Otto Bock MOSS II seating systems (see separate entries). The kit consists of webbing with a plastic side-release or push button-style buckle. DIMENSIONS: 1.5 and 2 inch widths.

Seat Board.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Eliminates the sling effect from a wheelchair sling seat, provides a solid seating platform. Diagram and direction for making a wooden seat support for a wheelchair. the board should be placed between, not on, the rails to which the seat is fastened. Similar to commercially available product. SKILLS REQUIRED: woodworking AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Accent Press, Bloomington, IL; p 45. NARIC CALL NUMBER: R0848. 1981.

Seat Cushion (Model 96)

The Seat Cushion, model 96, is a foam seat cushion designed for use with wheelchairs. The cushion is fabricated of foam covered with fabric. DIMENSIONS: 2 inches thick.

Seat Cushion (Model Ha-4783)

The Seat Cushion, model HA-4783, is a foam ring seat cushion designed for use by individuals who are at risk for developing pressures sores/decubitus ulcers. This polyurethane ring-shaped foam cushion helps reduce pressure and has a washable cotton cover. DIMENSIONS (HxLxW): 70 x 400 x 340 millimeters. WEIGHT: 370 grams.

Seat Hook, Adjustable-Single Hole, Two Hole, Five Hole, Seven Hole

The Adjustable Seat Hooks are designed to serve a variety of extended wheelchair seat positioning applications, such as angling or height adjustment. These stainless steel hooks are countersunk for a ##10 flathead screw. DIMENSIONS: The hooks are 0.75-inch wide and are available to fit tubes 0.75 inch, 7/8 inch, 1 inch, or 1 3/16 inch in diameter. COLOR: Available in black or stainless steel

Seat Hook, Drop

The Seat Hook, Drop is one-piece seating hardware designed for lowering and leveling a wheelchair seat. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are curved and deburred for a smooth finish. DIMENSIONS: The hook ends fit tubes 0.75 inch, 7/8 inch, 1 inch or 1 3/16 inches in diameter. The drop offsets range from 1 inch to 6 inches in 1-inch increments. COLOR: Available in black or stainless steel.

Seat Hook, Lift

The Seat Hook, Lift is seating hardware designed to lift and level wheelchair seats. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are rounded and deburred for a smooth finish. DIMENSIONS: The hook fits tubing 0.75 inch, 7/8 inch, 1 inch or 1 3/16 inches in diameter. The lift offset ranges from 0 inches, 0.5 inch, or 1 inch to 2 inches. COLOR: Available in black or stainless steel.

Seat Shell Adaptations

CUSTOM ADAPTATION PURPOSE: To provide proper positioning for a child with multiple disabilities, including cerebral palsy and lung disease. The family owned a Medifab seat and insert that was used in the car and provided appropriate positioning and support. However, they found it inconvenient to transfer the seat from the car to the house each time it was needed. The solution was to create another shell for the seat insert using an existing Medifab mobile base frame that was not being used. The

Seat-To-Back Brackets

The Seat-to-Back Brackets are stainless steel brackets designed for rigidly attaching a solid seat and back to each other at 80-degree (model BS-6080), 85-degree (model BS-6085), 90-degree (model BS-6090), 95-degree (model BS-6095), or 100-degree (model BS-6000) angles.

Seat2Go

Seat2GO is a floor seat designed for children who need extra support while seated. Contoured seat prevents user from sliding forward. Improves seating posture. Features 95 degree seat to back angle and double strap trunk support and belt.

Seat2Go (Models Crs 2000 & 3000)

Seat2Go is a floor sitter and positioning seat designed for use by children with balance, neurological, or severe physical disabilities. This soft support has a contoured seat that prevents the child from sliding forward and improves seating posture. It can be used on the floor, in a chair, or as a stroller insert. Features include a 95-degree seat to back angle, double strap trunk support and belt, and fastening straps to secure the seat to any other chair and that store in the back pocket when

Seating Hardware

Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.

Seating Hardware

Seating Hardware is designed for use with wheelchairs. This hardware is made of steel and includes 90-degree brackets and J-hooks (sold separately). DIMENSIONS: All hardware has 0.5-inch spacing, COLOR: Black.

Seating Support

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seating support for a child with dystonic cerebral palsy. When sitting in a chair, the child pushes his pelvis forward and becomes uncomfortable, and the child concentrates more on sitting than on his books, crafts, and other activities. The family attempted to remedy the seating issue by adding a two-piece insert, the commercially available “tomato seat;" however, this device did not secure properly to the chair. The child

See-Thru Work Tray (Model Nc94102)

The See-Thru Work Tray, model NC94102, is a lapboard designed to provide a work, eating, and activity surface for people who use wheelchairs. The clear tray is made of polycarbonate and bordered with an all-aluminum lip on the front and sides. The tray has a hook and loop straps that attach onto wheelchair armrests. DIMENSIONS (WxD): 23.5 x 19 inches. The width of the oval space in front of the user's stomach is 15 inches.

Self Cooling Cushion

The Self Cooling Cushion is a cooling cushion designed for use by individuals who sit for long periods. Designed for wheelchairs, sofas, office chairs, lawn chairs, kitchen chairs, and bench seats, this cushion reacts within 30 seconds by emitting a slow, soothing coolness. It is made with a blend of natural minerals and crystals for a relaxing and revitalizing comfort. This self-cooling cushion absorbs body heat, turning the crystals into a liquid, then automatically returning to a crystal stat

Self-Assisting Belt (Model 4220)

The Self-Assisting Belt, model 4220, is a wheelchair seatbelt designed to reduce siding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of heavy-duty nylon, this machine-washable belt is equipped with an airline-style buckle. DIMENSIONS: Fits hips up to 60 inches.

Self-Assisting Belt (Models 4228 & 4228L)

The Self-Assisting Belt is a wheelchair seatbelt designed to reduce sliding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of polypropylene webbing, this machine-washable belt is equipped with Velcro closure. DIMENSIONS: Model 4228 fits hips up to 42 inches and model 4228L is extrsa-long to fit hips up to 62 inches.

Semi-Rigid Wheelchair Foundation (Models 6521 & 6523)

The Semi-Rigid Wheelchair Foundation is a foam seat cushion designed for use in wheelchairs. Designed to provide firm, level seating, this closed-cell foam cushion features a convex bottom to prevent hammocking. Model 6523 includes a non-slip vinyl protective cover. Model 6521 does not include a cover. DIMENSIONS (WxDxH): 18 x 16 x 1.5 inches.

Shane’s Neck Brace

Shane’s Neck Support Brace is designed to keep a user's head in an upright position without degrading the muscle tone from restricted movement. Made of flexible synthetic tubing, Shane’s Neck Brace: allows the head full range of motion with 360 degree support as needed; can be used for many neck conditions or injuries, and can help improve one’s posture and aid with balance and neck fatigue; is completely waterproof; comes in three adjustable sizes; is endorsed for several conditions by doctors,

Sheepette Synthetic Sheepskin Bed Pads (Models D5001, D5002, D5003, & D5004)

The Sheepette Synthetic Sheepskin Bed Pads are decubitus pads designed for use by individuals with or at risk for pressure sores or ulcers. Maded of dense, heavyweight synthetic sheepskin, these pads distribute pressure evenly, allows air circulation, and help prevent skin shear. The pads are machine washable and dryable. Model D5004 has elastric securing straps on all four corners. DIMENSIONS: Model D5001 is 24 x 30 inches, model D5002 is 30 x 40 inches, model D5003 is 30 x 60 inches, and model

Sheepette Wheelchair Armrest And Seat Pads (Models D3004 & D3005)

The Sheepette Wheelchair Armrest Pad, model D3004, and Seat Pads, model D3005, are decubitus pads designed for use by individuals at risk for pressure sores or ulcers. Made of synthetic sheepskin, the seat pad is a one-piece pad that covers wheelchair back and seat to provide pressure relief. Also made of synthetic sheepskin, the armrest pads cover the armrests of the wheelchair to reduce pressure on the arms and elbows.

Shoe Holders

Molded ABS plastic shoe holder with padded ankle strap and forefoot strap. Attach to footplate with screws. Also available in extra heavy duty model. Sizes: Small 4 1/2 inches long by 3 inches wide, Medium 6 inches long by 4 inches wide, Large 8 inches long by 4 1/2 inches wide, and X-Large 9 1/2 inches long by 5 inches wide.

Shoe Holders

Molded plastic shoe holder in 4 sizes, 2 1/2 to 5 3/4 inches wide by 5 1/2 to 11 inches long. 1-inch nylon adjustable velcro straps at instep and toe. Hardware for bolting to footplate included. Replacement straps, pads for straps, and brackets for Motion Designs chairs available.

Shoe Holders (Models 30101S, 30101M, 30101L, 30102S, 30102M, & 30102L)

Shoe Holders are foot positioners designed for use by individuals who use wheelchairs. Made of Haircell plastic with nylon straps with quick-release plastic buttons, these shoe-shaped positioners ensure proper positioning of the feet. The 30101 models have one-inch on center mounting holes. The 30102 models do not have mounting holes. SIZES: Both the 30101 and 30102 models are available in small, medium, and large. DIMENSIONS (WxL): The small holders are 4.3 x 6 inches. The medium holders are 4.

Shoulder Harness

The Shoulder Harness is a padded shoulder support with 1 or 2 inch webbing designed to be mounted to lateral trunk support pads with cam buckles or H-style mounted to a seatbelt.

Shoulder Pommels (Model 6670)

The Shoulder Pommels, model 6670, are shoulder and neck supports designed for individuals who have a tendency to lean to one side. The pommels are constructed with a bottom channel so that the shoulder straps can be pulled through for attachment. The supports are made of vinyl coated foam with an outer reinforcement. DIMENSIONS: Single is 5 x 4.5 inches; the Double is 10 x 4.5 inches and curved to fit the shoulder. COLOR: Casa tan or black.

Shoulder Retraction Straps & Solid I Back Mount (Model 106-2000)

Shoulder restraint straps, 1 inch neoprene foam padded sleeve. Quick release side buckle. Multiple top mounting locations for proper contact angle over shoulder. Adjusts for different clothing. Mounted on solid I back. Sizes: small for 9 to 14 inches sitting height, medium for 14 to 20 inches sitting height, large for 20 to 28 inches sitting height.

Shoulder Retractors (Model Sr20)

Shoulder Retractors (model SR20) are malleable vinyl-coated pads on swingaway hardware designed to aid in trunk support of seated individuals. They will mount to aluminum pans or other rigid back panels.

Shoulder Stabilizers

The Shoulder Stabilizers are stainless steel shoulder supports designed for positioning and controlling the upper extremity shoulder girdle, and dealing with trunk flexion or rotation problems. The adjustable hardware (included) allows height, forward/backward, and lateral adjustment. The supports are padded with closed cell foam and upholstered with neoprene-backed nylon terry cloth. SIZE: Adult (model ASRA) and pediatric (model ASRP). COLOR: Black upholstery.

Shoulder Straps, Cinch Straps, Shoulder Supports

Pair of 2 inch velcro shoulder straps, to mount to front pads of swing away trunk support system or as replacement straps on a vest. Top of straps mount to solid back with D-rings or buckles. Can also be used for cinch strapping a basic seating insert to a wheelchair frame if specified when ordering. Shoulder supports consist of one pair of angled pads made with medium density foam over a Kydex form and attached to velcro shoulder straps. Smaller size available on request.

Shs Cushion

Wheelchair seat cushion designed to eliminate hammock effect created by wheelchair sling seat. SHS130 is a low profile cushion constructed of 2 inch medium density polyurethane foam and a 1 inch layer of low density fire retardant polyurethane foam. Beveled anterior edge reduces pressure behind the knee. Cushion is wrapped in rubberized neoprene and has a removable stretch terry cloth cover. Model SHS135 is constructed of a three layer combination of medium density foam, temper foam and low dens

Side Thoracic Support And Hardware (Models 434P1, 434F1, 434F2, & 434F3)

The Side Thoracic Support and Hardware is a trunk support pad with mounting hardware for either lateral or side support designed for wheelchair users. An extruded aluminum clamp attaches to the back frame of the wheelchair. It has a passive locking system which may be disengaged, and allows the pad to swing away for easy transfer. Contoured support pads are injection molded foam with semi-flexible steel reinforcement, and can be shaped as needed. Hardware may be ordered for the left or right sid

Sidehugger Back Cushion

The SideHugger Back Cushion is a back support cushion designed for use by individuals with mobility disabilities. The cushion attaches directly to the existing wheelchair back and hugs the user when leaned against, encouraging the user to position him/herself using the built-in lateral supports. DIMENSIONS (WxH): Standard and tall models are available for 16-, 18-, and 20-inch chairs.

Sidelyer Strap, H-Straps, & Pelvic Strap

The Sidelyer Strap, H-Strap, and Pelvic Strap are restraint and positioning belts designed for use in conjunction with the large foam positioning shapes by the manufacturer (see separate entries). The straps are fabricated of Evazote foam for cushioning ithout bottoming out. The Sidelyer Strap is designed to support the body in proper alignment when positioned on its side. It comes in Adult and Child models, both available with a hole for a gastrostomy tube. The H-Straps form a harness and are u

Sideminder Wheelchair Back (Models Mdtsm16, Mdtsm18, & Mdtsm20)

The SideMinder Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. This steel replacement back features up-and-down and side-to-side adjustments that provide lateral support to prevent leaning to one side. This back adapts to fit non-standard size chairs. OPTIONS: Available with or without lateral supports and headrest. SIZES: Avialable for 16-inch seat (model MDTSM16), 18-inch seat (mo

Signature-Fit Custom Cushion

The Signature-Fit Custom Cushion is a foam in place seating systems designed for use in wheelchairs by people with physical disabilities. The Signature-Fit system uses a portable simulator to capture the contours of the body, correcting anatomical deformities when possible and accommodating others. It measures the contours of the seat and back and transfers this information to a computer. The system enables multiple modifications to be made to the cushion measurements. Pressure relief can be pro

Silent Alert Care Call System

The Silent Alert Care Call System is a wandering patient system designed for use by individuals with Alzheimer's disease, mobility disabilities, or spinal cord injury. This system incorporates a small radio pager worn by the caregiver and one or more remote monitors. When the pager receives a radio signal from a monitor it illuminates one of six numbered keys and gently vibrates to discreetly advise the caregiver of an event. It can also be set to emit an audible alarm. Monitoring options includ

Silicone Waterproof Sealant Kit

The Silicone Waterproof Sealant Kit is a cushion cover coating used on foam cushion, foam wheelchair inserts, or the Foam-in-Place Seating (FIPS) system. The silicone provides an elastic waterproof sealant which is washable, safe for skin contact, and unaffected by body discharges. The silicone coating allows the foam to stretch and compress easily. COMPONENTS: Thekit includes an instruction sheet, a 10.3 fluid ounce tube of DOW 732 RTV silicone sealant, a caulking gun, plastic spreader, 2 pai

Silicore Gel Seat Cushion Omega (Model 5000)

Seat cushion with central core of polygel topped with layer of Silicore. Outer covering of velour or Naugahyde. Silicore fibers with hollow cores and siliconized shafts, will not mat down. Will not leak if punctured, polygel is self sealing. Resists temperature changes. Washable. Seventeen by 17 by 2 inches. Weight 16 pounds.

Simulator

Seating simulator for evaluation of persons needing a custom seating system. Can be used to help determine functional seating for modular, molded or mixed systems. Seat to back angle, seat tilt, depth and width of seat, back height, footrests, legrests and armrests can be positioned and corrected as needed to achieve optimal position. .

Single Tube Lift-Off Mounting Kit (Models 3611 & 3611-01)

The Single Tube Lift-off Mounting Kit is designed to attach the headrest, or the occipital ring and its Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Lift-Off Mounting Plate, a 90-degree Vertical Tube, and two 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube Mounting Kit (Models 3601, 3601-01)

The Single Tube Mounting Kit is headrest accessory hardware designed to attach a headrest or the occipital ring and its Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Mounting Plate, a 90-degree Vertical Tube, and two 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube With Cross Tube Lift-Off Mounting Kit (Models 3612 & 3612-01)

The Single Tube with Cross Tube Lift-off Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Lift-Off Mounting Plate, a 90-degree Vertical Tube, a 90-degree Cross Tube, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube With Cross Tube Mounting Kit (Models 3602, 3602-01)

The Single Tube With Cross Tube Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Mounting Plate, a 90-degree Vertical Tube, a 90-degree Cross Tube, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Sit 'n Place

Sit 'N Place is a pelvic stabilizer designed for use by individuals who use wheelchairs. This stabilizer is intended for wheelchair users who have a tendency to slide forward in their wheelchairs. Available in a standard and a super model for added support, the unit is placed between the user's legs and a strap extends between the seat and back and down to the anti-tippers to secure the unit. The unit has a flat, comfortable contact surface and the adjustable length and tapered top keep the use

Sit Time Monitor: A Device For Measuring Wheelchair Sitting Time.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The Sit Time Monitor is used to obtain objective, quantitative information on the number of hours a patient sits in a wheelchair. Describes device made of a pressure-sensitive ribbon switch pad placed under the wheelchair cushion, a digital electronic timer attached to the back of the chair, and a two part cable that joins them. Lists materials needed. Includes photographs. COMMENTS: Study supported in part by NIHR grant 23-578886. Authors affiliated w

Sit'n Easy Inflatable Back Cushion (Model Ez-1)

The Sit'N Easy Inflatable Back Cushion, EZ-1, is a back support cushion designed to provide proper back support to the lumbar (lower back) area. The cushion is covered in a flocked material and deflates for transport or storage. DIMENSIONS: 15 x 15 inches.

Six Piece Modular Positioning Set

The Six Piece Modular Positioning Set consists of foam positioning blocks designed to create individualized occupational and physical therapy treatment programs for persons with varying disabilities. The design accommodates numerous positions within the developmental sequence. The pieces are vinyl-covered, and therefore waterproof and cleanable with soap and water. The set consists of interchangeable rectangles, squares, and triangles (wedges). All sets come with four straps included. SIZES: Thr

Skate Mesh Ergonomic Chair

The Skate Mesh Ergonomic Chair is an ergonomic chair designed for use to provide back support while working at a desk to reduce back stress. The Ergonomic Chair has a Sub-skating recline mechanism that enables constant contact between lumbar region and chair back. Soft pad adjustable arm rest with pivot. Seat and back adjust simultaneously. Meets or exceeds all ANSI/BIFMA standards.

Skil-Care Incontinent Resistant Foam Cushion

The Skill-Care Incontinent Resistant Foam Cushions are foam seat cushions designed for use in wheelchairs or geriatric chairs. These high-density foam cushions provide sitting comfort and pressure relief and may be purchased without a cover, with a vinyl cover, or with a nylon cover. Safety ties are included to prevent sliding off the chair. DIMENSIONS: Available in 16 x 18 x 2 inches, 16 x 18 x 3 inches, or 16 x 18 x 4 inches.

Skil-Care Removable Wheelchair Lap Trays (Series 7050)

Skil-Care Removable Wheelchair Lap Trays, series 7050, are designed to provide a work and feeding surface and positioning support for people who use wheelchairs. Available styles include a long-lasting Dura-Tray, a clear tray, an Econo-Tray, and a padded SofTop Tray. The SofTop Tray is available in an adult or a child's model. All trays feature straps that secure around the chair with easy-open closures. OPTIONS: Replacement straps. DIMENSIONS: The child's SofTop Tray is 19 x 22 inches.

Skil-Care Resident-Release Nylon Belts (Series 7010)

Skil-Care Resident-Release Nylon Belts, series 7010, are wheelchair seatbelts designed to provide security and positioning assistance for people who use wheelchairs. These belts secure to the wheelchair using the existing screws and are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. DIMENSIONS: All models are two inches wide. The model with the side-release buckle is available in 42 or 54 inches long. The model with

Skil-Care Resident-Release Soft Belts (Series 3012)

Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.

Skil-Care Slide-Guard Cushion (Series 7512)

The skil-Care Slide-Guard Cushion, series 7512, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sling-seat hammocking. The foam cush

Skil-Care Slide-Guard Wedge (Series 7513)

Skil-Care Slide-Guard Wedge, series 7513, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions feature a wedge shape and a pommel and are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sli

Skil-Care Ultra Cushion (Models 754310, 754320, & 754330)

The Skil-Care Ultra Cushion is a foam or gel and foam seat cushion designed to provide a firm seating foundation for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a non-compressing firm foundation and a contoured base that rests below the seat frame to enable users to sit lower in the chair. The attached straps secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermi

Skil-Care Ultra Wedge (Series 7541)

The Skil-Care Ultra Wedge is a foam or gel and foam seat cushion designed to provide a firm seating foundation and sliding control for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a fixed wedge shape that resists compression and straps that secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermic gel on top of foam for even weight distribution. The foam model comes

Skil-Care Wheelchair Backrest Cushion (Model 703063)

The Wheelchair Backrest Cushion, model 703063, is a foam back cushion designed for use with wheelchairs. This firm-backed foam-padded cushion is covered in easy-clean vinyl and features tie cords to secure the cushion to the wheelchair push handles. DIMENSIONS: Fits 18 inch wheelchairs.

Sleek Seat.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Positioning seat to hold a child's legs in a flexed position, bring the shoulders into protraction and allow the hands to come together midline. Chair made from a large cardboard or PVC tube cut into the shape of a chair with edges padded with foam tubing, and a hole cut out of the area behind the head. The seat is a velcro-attached cotton sling, adjustable in depth, suspended in the tube. Includes drawings. SKILLS REQUIRED: Plastics. Sewing. Assembly.

Sleepy Time Headrest

The Sleepy Time Headrest is a head and neck support designed for use by for children with neurological or physical disabilities sitting in car seats. Covered with cotton fabric, this support has a polyester fill that cradles the child's head and neck in all directions, without confining head movement. The Sleepy Time Headrest can be used in car seats, booster seats with backs, infant carriers, strollers, infant swings, wheelchairs, and feeder chairs. SIZES: Infant (for children up to 25 pound

Sliding Headrest Bracket

The Sliding Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury or cerebral palsy. It is added to a headrest on a seat or wheelchair to enable headrest adjustments. This slotted interface bracket allows the headrest to be offset to either side, with infinite lateral adjustment up to 2 inches for an Otto Bock or NE-AT Headrest Bracket (see separate entry). This bracket attaches to the seating system using the existing h

Slim Supports (Models 6322 & 6323)

Slim Supports are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs or geri chairs. Constructed of plywood and padded foam and covered in wipe-clean vinyl foam, model 6322 fits standard wheelchairs and secures with Velcro straps and model 6323 fits inside the armrests of geri chairs.

Slip-On Neoprene Trunk Lateral Pad

The Slip-On Neoprene Trunk Lateral Pad is lateral trunk support pad designed for people with neurological or mobility disabilities or cerebral palsy. The pad is intended to protect and provide comfort to users of lateral trunk supports. The pad is made of extra thick neoprene rubber, which is cushy, waterproof, and can conform to curves. Each pad can be cut to fit a specific support. The neoprene is bonded on the outside to a stretchy fabric and on the inside to loop Velcro that can fix the pad

Slip-On Portable Cafeteria Bench

The Slip-On Portable Cafeteria Bench promotes social interaction, independent sitting, and self-feeding. The seat can be used at any table in a cafeteria which aids in choice-making and builds self-esteem. *Adaptive Design products are custom-ordered; dimensions and weight capacity will vary with each order.

Slipcasting Board

The Slipcasting Board is a lapboard designed to assist users with limited strength to handle the large, heavy plaster molds that are used for slipcasting. The device consists of a 3/4-inch plywood board with an opening on one side. The user places the board between two chairs and sits on one side. The board surface supports the plaster mold and provides a safer working position to handle the heavy mold. The opening allows the slip to be poured out of the mold and into a bucket which is placed on

Small Ball Chair

The Small Ball Chair is designed for children to improve posture and balance. Consists of inflatable ball for sitting and back support. Has four non-locking caster wheels. Includes pump.

Small Wooden Chair

CUSTOM ADAPTATION PURPOSE: To provide seating to encourage development of trunk control for children with balance or lower extremity disabilities or other physical disabilities. Made of plywood, these chairs have a low back and armrests and enable children to sit with their feet flat on the floor. The chairs are well-braced for added strength. TITLE: Happy Seating. JOURNAL: TAD Journal. REF: Volume 27, Number 3, October 2007: p. 9-12. PAGES: 5. (including cover).

Smartseat Drop Seat

The SmartSeat Drop Seat is a drop seat base designed for use in wheelchairs. This adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. DIMENSIONS: Models are available for 16-, 18-, and 20-inch wheelchairs. The seat can be lowered up to three inches.

Snug Support Wedge Positioner

The Snug Support Wedge Positioner is a wege seat designed to support infants up to 30 inches long at a 30-degree angle. The angle is conducive to relaxation, feeding, stimulation, and to alleviate gastroesophageal reflux. The seat is covered in polymer-coated fabric for ease in cleaning and includes a hook-and-loop fastening waist and crotch belt and three adjustable bumpers for support. COLOR: Multi-colored clown print.

Snug Supports (Models 706310 & 706311)

The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs. These supports are placed inside the wheelchair to provide support and reduce lateral leaning. They also serve to reduce the interior space in the chair, adapting a standard chair for the needs of a smaller user. These supports feature a foam-padded plywood frame and a spray-and-wipe clean vinyl cover. Adjustable straps permit attachment to any wheelchair. Model 706310 is a pair of supports and mod

So Soft Deep U Headrest (Model Ssdu100)

The So Soft Deep U Headrest, model SSDU100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs and need to keep their heads positioned upright and centered. This unit has aggressive laterals for maintaining head position, tapered for minimal interference of vision. The headrest has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure reli

So Soft Oval Headrest (Models Sso100S & Sso200L)

The So Soft Oval Headrest, models SSO100S and SSO200L, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The headrest has a contoured shape for lateral support. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. The headrest comes with a zippered Triptex cover. SIZES: Small (SSO100S) or large (SSO200L). DIMENSIONS: 11 x 5 in

So Soft Quad Headrest (Model Ssq4100)

The So Soft Quad Headrest, model SSQ4100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The unit is slightly contoured for comfort and positioning. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. This headrest comes with a zippered Triptex cover. DIMENSIONS: 9 x 6.5 inches.

Sof Care Chair Cushion (Model Cc476)

Air flotation seat cushion, polyvinyl, divided into air pockets to distribute the pressure, preinflated. 18 by 17 inches. Terry cloth cover available.

Sof-Care Bed Cushion, Bed Cushion Plus, & Chair Cushion

Air flotation mattress surface. 300 individual air cell design allows air to transfer through interconnecting channels, redistributing patient weight over entire cushion. Corner straps for stability. Bed cushion: 33 1/2 inches by 75 1/4 inches. Sof-Care Chair Cushion, 18 inches by 17 inches. Cotton/poly terry cover. Velcro closure. Options: Inflator, 4 inches diameter by 13 inches long, 3 pounds. Inflation Adapter can be used in conjunction with bicycle pump. Warranty available.

Soft Seat (Models 6392 & 6394)

The Soft Seat is a seat cover for a wheelchair designed to enhance comfort and reduce pressure sores. Model 6392 is a seat and back pad set and model 6394 is a pair of armrest pads. These machine-washable sets (sold separately) are made of synthetic fur padding and fit most wheelchairs with full-length arms. The seat back pad secures to the wheelchair with loops that slip over the push handles.

Soft-Touch Sitter With Mobile Base

The Soft-Touch Sitter with Mobile Base is a floor sitter designed for use by children or adults who need positioning support. It has a soft contoured seat with an integral anti-thrust seating surface, contoured lateral and head supports, an adjustable 5-point positioning harness, and attachments straps The seat is made of seamless, latex-free, anti-microbial material that is peel- and tear-resistant, impermeable to fluids, and withstands cracking. The wood base is maple-faced plywood. The unit i

Softeze Flotation Gel Pad

The Softeze Flotation Gel Pad is a gel flotation seat cushion designed for use in wheelchairs.This cushion includes an anti-bacterial, anti-static, flame retardant cover. DIMENSIONS: 17 by 17 inches. WARRANTY: Unconditional replacement guarantee for one year.

Softspot Low Profile Back Rest (Model 7151Bl)

The SoftSpot Low Profile Backrest, model 7151BL, is a back support cushion designed for use to reduce back strain while sitting for long periods. This polyurethane foam backrest cushions and supports the lower back and spine, reducing strain and fatigue. Its upper edges are curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape and provides support. The surface is non-ab

Softspot Lumbar Roll Backrest (Model 7150Bl)

The SoftSpot Lumbar Roll Backrest, model 7150BL, is a back support cushion designed for use to improve comfort and posture for individuals who sit in a chair for long periods. This polyurethane foam cushion provides direct support for the lumbar region. The upper edges are softly curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape to maximize support. The surface is n

Softspot Seat Cushion (Model 7152Bl)

The SoftSpot Seat Cushion, model 7152BL, is a foam seat cushion designed for use by individuals to reduce pressure from sitting. The cushion's Therasoft polyurethane foam and softly curved edges distribute weight evenly and help to minimize pressure points. The cushion supports the lower back and spine helping to reduce strain and fatigue. Cut-away contours slope away from pressure points at the coccyx (tailbone), and the cushion's wedge shape helps promote proper seating posture to maintain the

Solid Back

Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m

Solid Back Insert (Model 75)

The Solid Back Insert, model 75, is designed for use in wheelchairs with sling upholstery and push handles. The insert features a rigid base with a foam liner, a fabric cover, and loops to secure it to the wheelchair push handles

Solid Backs (Models 102-1000, 102-2000, 102-3000, 102-4000, 102-5000, & 102-6000)

Adaptive solid seat backs with 1/2 inch plywood bases, 1/2 inch foam padding and Naugahyde, shelterite or synthetic lambswool covers. Available in any size, with or without mounting hardware. Modifications available include cutouts, extra or special foam, curved back, I-back, wedge cut.

Solid Drop Seat Systems (Models 31642 & 31643)

Solid Drop Seat Systems are solid seat inserts designed for use by individuals who use wheelchairs. The systems include a seven-ply birch solid seat insert and jeavy-duty J-brackets that may be adjusted to raise or lower the seat to achieve proper positioning for the user. The seat features cut out slots to fit around frame crossmembers. DIMENSIONS: The seat insert is 3/8-inch thick. Model 31642 fits chairs with a 16-inch seat and is 13 x 16 inches. Model 3143 fits chairs with 18-inch seats and

Solid Footboard (Model 108-8016)

Solid footrest with fixed or swing away brackets. Waterproof finished birchwood with plastic edges. All sizes. Mounts with 1 inch drop hooks and 30 degree clamps.

Solid I Back Mount Trunk Supports (Model 105-1000)

Lateral trunk support for adaptive positioning. 1/2 inch plywood base with 1 inch neoprene foam padding covered with Naugahyde, shelterlite, or synthetic lambswool pads. Pads are straight, not contoured, with L shaped brackets to allow vertical and horizontal adjustment. Designed to be used with an I Back. Sizes: 4 inches long by 3 inches high, 5 inches long by 4 inches high, 6 inches long by 5 inches high, 7 inches long by 6 inches high. Custom sizes available.

Solid Seat

Custom size solid seat with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and abductor mounting. Custom foams available. Modifications available include anti-thrust seat, leg length discrepancy, and built-in abductor. May be ordered without aluminum hardware, or mounted to chair with cinch straps, stationary knob- release hardware, adjustable angle knob-release hardware, non- adjustable drop hooks, or adjustable

Solid Seat (Model Ss1000)

The Solid Seat, model SS1000, is a drop seat for a wheelchair designed for use by individuals with a need for a lower seat due either to a high cushion or who propel the wheelchair with their feet. The Drop Seat is made of durable HDPP and fits most manual and powered wheelchairs. The hole pattern accomodates one-inch mounting increments. Velcro strips are provided to secure a cushion. The hardware adjusts from one-inch above a tube frame to 3 inches below a tube frame. DIMENSIONS (LxW): Avai

Solid Seat And Back

Solid seat and back inserts. Hardwood plywood base with firm foam padding. Naugahyde cover. Various hardware styles and clamps attach units to wheelchair. Customized to fit any wheelchair frame; manual, power drive, travel chair or sport chair. Back insert models: T-back, R- back or with straps.

Solid Seat Insert (Model 94)

The Solid Seat Insert, model 94, is designed for use in wheelchairs with sling upholstery to provide additional seating support. The insert has a rigid base with a foam liner.

Solid Seat Inserts (Models 31640, 31641, 31645, 31646, 31647, & 31648)

Solid Seat Inserts are designed for use by individuals who use wheelchairs. Available in a choice of seven-ply birch wood or paper phenolic with or without a hand hole, these inserts can be used in a standard sling seat to provide support for a cushion or as a base for a custom seating system. DIMENSIONS:Models 31640, 31645, and 31647 are 16 x 16 inches. Models 31641, 31646, and 31648 are 16 x 18 inches. The birch models are 3/8-inch thick. COLOR: Models 31647 and 31648 are black. The other mode

Solid Seat With Adjustable Brackets And Split Collar Clamps (Model 101-4000)

Solid seat, 1/2 inch marine grade plywood with 1 1/2 inches of foam padding, naugahyde upholstery. Brackets allow up to 3 inches of drop or 3 inches of raise in seat, or tilt in seat to accomodate needed angle of hip flexion. Can be fixed or removable depending on placement of the clamps. Seats are cut to fit between the rails.

Solid Seat With Attaching Hardware (Model Ee1) & Solid Back (Model Ee2)

Solid seat and back, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding. Hardware is designed to allow adjustment of seat to back angle, seating depth and flexion. Naugahyde upholstery. Full of cushion is rounded. Custom widths.

Solid Seats (Models 101-1000, 101-2000, & 101-3000)

Adaptive solid seat, 1/2 inch plywood base, 1 to 1 1/2 inch foam padding. Naugahyde, shelterite or synthetic lambswool covers. Any width or depth available. Special modifications available include cutouts, leg length discrepancy, wedge cut, special foam, anti-thrust cushion. Available with or without mounting hardware.

Solid Wheelchair Pad With Nylex Cover (Models Msc019009, Msc019016, & Msc019022)

The Solid Wheelchair Pad With Nylex Cover is a solid foam wheelchair cushion designed for use by individuals with mobility disabilities. The cushion is designed to help prevent the user from sliding forward or out of the wheelchair, and the Nylex cover is fluid-resistant and antimicrobial. Models MSC019016 and MSC019022 are latex-free. DIMENSIONS (HxLxW): 4 x 18 x 16 inches (model MSC019016), 2 x 20 x 16 inches (model MSC019009), or 2 x 18 x 18 inches (model MSC019022).

Solo

Solo is an air and foam flotation cushion designed for use in wheelchairs by individuals with balance disabilities, lower extremity disabilities, mobility disabilities, and spinal cord injury. This cushion is made of foam of different densities that align with anatomical landmarks and offer medial and lateral support. A medium density foam is used to form the pelvic buckets and thigh troughs. A less stiff foam is used in the cushion to protect the skin over the buttocks from breakdown while prov

Sorbothane.

Polyurethane energy absorbing elastomer. Safe for prolonged skin contact. Sold in sheets but company will manufacture it in variety of shapes and sizes. Standard size: 12 by 12 inches or 24 by 24 inches, thickness available from 1/10 to 1 1/2 inches. Also sold in various insole products and in various sizes.

Southpaw Sensory Rocker

The Southpaw Sensory Rockers are contoured rocking chairs that provide gentle sensory stimulation while holding the user in a cradled position. This positioning is fine for those who only need mild vestibular input.

Spacer Kit

Spacer Kits are seating hardware designed to be used in wheelchair seating systems. Along with adjustable brackets, spacers are used to space out hooks. For example, a spacer is used when mounting a 14-inch seating system on a 15-inch wheelchair. Spacers are fabricated from a solid piece of aluminum with clearance holes for ##10-32 screws placed on 1/2 inch centers. A Spacer Kit contains one Spacer Block, two ##10-32 x 1 inch Flat Head Socket Drives with Grade 8 screws, and two ##10-32 Nylok Nu

Span+Aids Abduction Pillow (Standard And Economy Models)

The Span+Aids Abduction Pillow is a leg abduction positioner designed to keep the user's legs in the desired position while seated or lying down. This large foam wedge fits between legs and the standard model has wide foam straps for securing legs to wedge; the economy model has adjustable Velfoam straps. These pillows allow the user to be turned 90 degrees to prevent sacral pressure sores. SIZES: Small, medium, or large. DIMENSIONS: The small wedge is 18 x 12 x 4 x 7 inches; the medium wedge is

Span+Aids Abduction Pillow With Comfort Band

The Abduction Pillow with Comfort Band is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. SIZES: Small, medium, or large. DIMENSIONS: The small is 18 x 12 x 4 x 7 inches; the medium is 23 x 14 x 4 x 7 inches; and the large is 25 x 16 x 6 x 7 inches.

Span+Aids Abduction Pillow With Comfort Band & Ulnar Nerve Protectors

The Abduction Pillow with Comfort Band & Ulnar Nerve Protectors is a set of one leg abduction positioner designed to maintain the legs in the desired position and a pair of elbow protectors. The large foam wedge fits between legs and adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. The set also includes a pair of Ulnar Nerve Protector (see also separate entry) and an extra Comfort Band. This device enables the user to be

Span+Aids Abduction Pillow With Contour

The Abduction Pillow with Contour is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and features contoured leg channels. Adjustable Velfoam straps secure the wedge to the user's legs. SIZES: Small, medium, or large. DIMENSIONS: The small is 18 x 12 x 4 x 7 inches; the medium is 23 x 14 x 4 x 7 inches; and the large is 25 x 16 x 6 x 7 inches.

Span+Aids Abduction Pillow With Contour & Comfort Band

The Abduction Pillow with Contour & Comfort Band is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and features contoured lag channels. Adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. DIMENSIONS: 27 x 17 x 4 x 6 inches, 23 x 14 x 4 x 7 inches, or 20 x 19 x 7 x 7 inches.

Span+Aids Wheelchair Abduction Pillow

The Wheelchair Abduction Pillow is leg abduction positioner designed to maintain the legs in the desired position while the user is in a wheelchair. The foam wedge fits between legs and features contoured leg channels. Adjustable Velfoam straps secure the wedge to the user's legs. DIMENSIONS: 8 x 6 x 12 x 7 inches.

Special Tomato Adjustable High Chair

The Special Tomato High Chair features an adjustable, hardwood seat and footrest, enabling the chair to conform to the needs of a growing child. The optional padded cushions for the seat and contoured backrest are made of Soft Touch brand, wipe-clean, seamless material. The high chair also features an optional tray for trunk stabilization, as well as feeding.

Special Tomato Mps Car Seat

The Special Tomato Multi-Positioning Seat Car Seat Version is a child's car seat designed for use by children and youth with physical disabilities. The seat has adjustable seat, head, and back cushions and offers a choice of regular or extended size seat cushions, allowing the seat width and depth to be adjusted to accommodate the child's growth. Other features include a seat shell, a latch strap and tether strap for in-vehicle use, and safety attachment straps for use outside of a vehicle. The

Special Tomato Multi-Positioning Seat (Mps)

The Special Tomato Multi-Positioning Seat (MPS) is a youth positioning seat designed for children ages two to fourteen years old with severe physical disabilities. This chair features Hip Flex adjustment to provide seat to back angle positioning with adjustments of 15 degrees hip flexion and 15 degrees hip extension without recline. The chair adjusts to grow with the user and the cushions adjust to meet the child's positioning needs. The thigh depth extension seat cushion allows for growth. Feat

Special Tomato Soft Touch Liners

The Special Tomato Liners offer light support and comfort for your child with mild to moderate physical involvement. This product can be used to provide light structure for a child who may need additional back or trunk support. The liners are made from soft-to-the-touch materials that won't tear or puncture. The outer skin is impermeable to fluids and easily wipes clean. The liners can be taken from chair to chair (i.e. home, restaurants, airplanes, etc).

Special Tomato Soft-Touch Sitter

The Special Tomato Soft-Touch Sitter is a floor sitter designed for use by chiildren with phsyical disabilities. The sitter promotes proper head, neck, and trunk alignment, and can be attached to a standard chair with attachment straps, or to the optional tilt wedge or mobile tilt wedge. It is made from a soft, latex-free material that is impermeable to fluids. OPTIONS: Tilt wedge and mobile tilt wedge. SIZES: 1, 2, 3, 4, or 5. DIMENSIONS (HxLxW): 25 x 12 x 12 inches (Size 1), 29 x 14 x 14 inche

Spenco Bed Pad (Model Msp05)

The Spenco Bed Pad, model 31-115, is designed for persons confined to their bed for long periods of time. The pad covers the entire bed like a thick comforter and ensures comfort by reducing pressure on key body points. The pad is cotton/polyester on one side and has waterproof sheeting on the reverse for incontinent situations.

Spenco Seat Pillow (Model Msp09)

The Spenco Seat Pillow, model 31-351, is a decubitus pad for persons with lower mobility disabilities confined to chairs for extended periods of time. The cotton/polyester cushion can be used on any chair, seat or car sitting surface.

Spenco Wheelchair Pad (Model 31-252)

The Spenco Wheelchair Pad, model 31-252, is a decubitus pad and armrest pad for persons using wheelchairs. The cotton/polyester covering provides protection for the arms and torso. The back of the pad is covered with waterproof sheeting.

Spiffy

SPIFFY is a molded plastic floor sitter designed for use with children's seating systems up to 12 inches wide. A tilt-in-space feature adjusts from 0 to 25 degrees, and an ABS plastic tray attached to the unit provides a lapboard play surface. Manufacturer recommended for children up to 30 months of age, this unit also provides an alternate base to a stroller, wheelchair or highchair to allow the child to play and interact more readily with his/her peers at floor level. DIMENSIONS (HxLxW): 16

Spine Align

The Spine Align is a lumbar support cushion designed to be used as a lower back support for people with chronic sitting pain or who must sit for long periods at a time and who require additional support at the lumbo sacral curve. The cushion features a convex back, a soft center channel and a moisture resistant Cordura nylon cover. The portable cushion attaches with Velcro straps to a wheelchair, car seat, or office chair. DIMENSIONS (HxWxD): 5 x 13 x 2.25 inches thick at the center. WEIGHT: 5 o

Spine Ease Deluxe Massage Pillow (Model Sp-1)

The Spine Ease Deluxe Massage Pillow, SP-1, is a vibrating lumbar support cushion designed to reduce lower back discomfort. This portable pillow can be used anywhere - in the home, office, or car. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14.5 x 15 inches.

Spine Reliever Back Support Bed Wedge

The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.

Spino Sacral Relief Back Cushion (Models 02-2121 & 02-2221)

Foam back cushion with 1/2 inch base of Tufloat and 1 inch top layer of Velfloat. Extra pressure relief for bony prominences of back. Sizes: 16 by 16 inches by 1 1/2 inches (02-2121) or 18 by 18 by 1 1/2 inches (02- 2221). Includes zippered washable double knit cover. Optional: special widths, depths or thicknesses, cutouts, ties or tabs with snaps.

Square Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Chair with sides and a pommel to provide support for a child who cannot sit alone. Instructions for constructing a chair of plywood - 1 back, 1 seat and 2 sides - and a dowel for a pommel. The pommel can be made adjustable by drilling several holes it can fit; it can also be padded, as can the chair. Includes drawings and a list of materials needed. SKILLS REQUIRED: Woodworking. AUTHOR: Hartrick, J TITLE: Equipment to Make: A Guide for Parents with a C

Square Modular Seating System

The Square Modular Seating System (model 30-1060) is a youth positioning chair for neurologically impaired children. The brightly colored chair is made of foam and covered with a urine proof, stain and odor resistant, non- toxic material that is cleanable with a damp cloth. An 8-piece shape set is available to assure a secure fit. The additional shape set (model 30-1061, $225) consists of 4 rectangles, two triangles, one ring, and one disc. DIMENSIONS: Seating module measures 20 x 20 x 11 inches

Square Tubing Seat Hook, Adjustable -- Single Hole, Two Hole, Five Hole , Seven Hole

The Adjustable Square Tubing Seat Hooks are designed to serve a variety of extended wheelchair seat positioning applications, such as angling or height adjustment in conjunction with an adjustable bracket. Made of stainless steel, they are countersunk for a ##10 flathead screw. DIMENSIONS: The hooks are 0.75-inch wide and are available to fit square tubes 0.75 inch, 7/8 inch, or 1 inch in diameter. COLOR: Available in black or stainless steel

Square Tubing Seat Hook, Drop

The Square Tubing Seat Hook, Drop is designed to lower and level the seat in wheelchairs with three-quarter inch square tubing. It is made of stainless steel and fabricated with two 17/64 inch x 5/8 inch mating slots. Both ends are rounded and deburred for a smooth surface. DIMENSIONS: The drop offset ranges from 0 inches to 1.5 inches in half-inch increments. COLOR: The hooks are available in black and stainless steel.

Square Tubing Seat Hook, Lift

The Square Tubing Seat Hook, Lift is designed for raised seat applications on wheelchairs with three-quarter inch square tubing. It is made of stainless steel and is fabricated with two 17/64 inch x 5/8 inch mating slots. The ends are both rounded and deburred for a smooth surface. DIMENSIONS: The lift offset is 1 inch. COLOR: Stainless steel or black.

Squishy Gel Cushions

Squishy Gel Cushions lets kids wiggle to improve concentration and attention skills while allowing them to stay in place. Place them on a child’s lap to serve as fidget toy and to provide tactile stimulation, or use as a seat cushion to allow for movement during learning time. The Fishy Gel Cushion has floating fish inside, giving kids something extra to occupy fidget-prone fingers. The Bumpy Gel Cushion contains PVC beads for children to play with.

Stage 1 Overlay Cushion

The Stage 1 Overlay Cushion is an alternating air pressure flotation seat cushion designed to prevent pressure sores for people with lower extremity or mobility disabilities, spinal cord injury and others who are at risk for pressure sores. It can be used in a wheelchair, automobile seat, or other chair. The bottom of the cushion has a cling type surface. The cushion is covered in breathable fabric treated to resist soil and stains. A clear vinyl plastic case protects the pump from spilt coffee

Stage 1 Overlay Cushion Waterproof

The Stage 1 Overlay Cushion Waterproof is an air flotation cushion designed for use with individuals who are at risk for pressure sores and have incontinence issues. It has a waterproof and washable cover and a clear vinyl enclosed pump with a smart charger. This cushion can be used in an automobile seat, wheelchair, or lounge chair as well as in managed care facilities for ambulatory and geriatric patients and in bed between the hips or other bony area where the possibility of pressure sores ar

Standard And Trisectional Lumbar Cushions

The Standard and Trisectional Lumbar Cushions are back support cushions designed to provide support for those who must remain seated for long periods. The Trisectional Cushion is designed with an elevated center to provide support in three planes: vertical, lateral, and direct lumbar area. The standard cushion has a full contour without an elevated center. A washable cover is standard on both models. Both models are available with or without a Masonite insert for rigid support and a securement s

Standard Back Cushions (02-1000 Series)

Foam back cushions. Sizes: 16 by 16 inches, 18 by 16 inches, 16 by 22 inches, 18 by 22 inches, 16 by 32 inches, 18 by 32 inches. All sizes available in thicknesses of 1, 1 1/2 or 2 inches. Includes zippered washable double knit cover. Optional: special widths, depths and thicknesses, cutouts, ties or tabs with snaps.

Standard Chair Conversion: 2: Backrest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: High back provides more support in a classroom chair. Back for a classroom chair made of plywood to fit the width of the chair and torso height of the child. Additional head support and harnesses depend on medical advisor. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Your Handicapped Child REF: London, England: Souvenir Press: p 38-39. Also available from Prentice-Hall, Englewoods Cliffs, NJ. NARIC CALL

Standard Comfortline Armrest Series

The Standard Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests have foam padding covered in molded satin vinyl and are available in fixed or flip- away models for both right and left wheelchair arms. These armrests feature a molded cup holder recess. DIMENSIONS (WxD): 9.5 inches wide at the widest point, tapering to 8 inches x 22 inches. The armrests have a .5-inch thick wood base

Standard Curved Padded Headrest (Model Hrc100)

The Standard Curved Padded Headrest, model HRC100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. It has a contoured U shape for positioning, and foam padding with a zippered Triptex cover. DIMENSIONS: 11 x 4 inches. Padding is 2.5 inches deep.

Standard Viewline Plus Armrest Series

The Standard Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. The armrests are fabricated of transparent, unbreakable, scratch-resistant polycarbonate and are available in fixed or flip-away styles for both right and left wheelchair arms, and are available in armrest only or armrest with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 9.5 inches wide at the widest point, tapering to 8 inches. COLOR: The plas

Standard Woodline Light Reversible Armrest

The Standard Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest comes standard with a clear lacquer finish and is designed to be assembled by the user in either a right or left configuration. Model 31326 is a fixed armrest and Model 31328 is a flip-away style; all necessary mounting hardware is included with both models. DIMENSIONS: 3/8 inch thick x 22 inch

Stealth Comfort Plus Headrest (Models Asl909 & Asl910)

The Stealth Comfort Plus Headrest, models ASL909 & ASL910 are wheelchair headrests designed for use by individuals with mobility disabilities. The large padded headrests come with fixed mounting hardware. Padded with dual layers of premium foam, these headrests come with a plush slip-on Darlexx cover. They have metal backs and come with half-inch square Otto-Bock style headrest hardware. OPTIONS: Flip-down headrest hardware (model ASL617); adjustable/removable headrest hardware (model ASL623

Stealth Elite Headrest (Model Sm-Se210)

The Stealth Elite Headrest, model SM-SE210, is a headrest designed for use by individuals who use wheelchairs. This headrest is intended for individuals who do not need a midline cue. The two lateral swing-away components can be used for switch mounting and if a sensor is added in the backpad, it can also be equipped for computer access.

Stealth Ultra Headrest (Model Sm-Su200)

The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad.

Steel Channel Bracket Attaching System (Model 30300)

The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product

Sternal Support System

The Sternal Support System consists of sternal support pads, available in two sizes for children and two sizes for adults. They are made of self-skinning urethane foam. The small and medium sizes are a broad flat pad, the intermediate and large sizes is extended into an X configuration. The harness strap attaches four corners of the pads to the four corners of the back of the wheelchair. The strap kit is $13 to $8.75; the pads are $30.50. DIMENSIONS (WxH): The Child size is 6 x 3.781 inches; Sma

Stimulite Bariatric Cushion

The Stimulite Bariatric Cushion is a foam seat cushion designed to prevent decubitus ulcers/pressure sores in wheelchair users. The cushion is made of a perforated honeycomb material that allows air to circulate and moisture to evaporate, which helps to maintain skin integrity and keep the body at ambient temperature. The cushion has three layers of honeycomb material with a flat bottom. An incontinence pad fits between the cushion's top and bottom layer. The cushion is available with either a p

Stimulite Classic & Classic Sling Cushion

The Stimulite Classic and the Stimulite Classic Sling Cushion are foam seat cushions designed for use in wheelchairs. These cushions are made of three layers of honeycomb, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The included cover wicks away moisture to protect the skin. Both the cushion and cover are machine washable and dryer safe. The Classic Cushion is designed for use w

Stimulite Contoured Cushion

The Stimulite Contoured Cushion is a foam seat cushion designed for use in wheelchairs. These cushions are made of three layers of honeycomb, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The included cover wicks away moisture to protect the skin. Both the cushion and cover are machine washable and dryer safe. Models are available for use with flat, stiff upholstery and for use w

Stimulite Contoured Pediatric Cushion

The Stimulite Contoured Pediatric Cushion is a foam cushion designed for use by children at risk for pressure sores. The cushion has a honeycomb structure with a flat bottom and a polyester or sheepskin cover. The cushion is machine washable and dryer safe. DIMENSIONS (LxW): 10 x 10, 12 x 12, or 14 x 14 inches. Cushions are 2.5 inches thick. WEIGHT: 1 to 2 pounds.

Stimulite Corbee Pediatric Cushion

The Stimulite Corbee Pediatric Cushion is a foam seat cushion designed for use by children who use wheelchairs. The cushion is made of a honeycomb material with a flat or sling bottom and comes with a polyester or sheepskin cover. The cover is machine washable and dryer safe. DIMENSIONS (LxW): Available in 10 x 10 inches, 12 x 12 inches, or 14 x 14 inches. The cushion is 2 inches thick. WEIGHT: 1 to 2 pounds.

Stimulite Lumbar Support

The Stimulite Lumbar Support is a back support cushion designed for use by individuals who need posture support. The cushion provides firm support in a chair or car while improving posture, relieving pressure, and keeping the user cool and dry. It has a removable, adjustable strap and is machine washable.

Stimulite On Top Cushion Cover

The Stimulite On Top Cushion Cover is a cushion cover designed for use with wheelchair cushions. This machine-washable cover fits over any cushion to control heat and moisture. DIMENSIONS (LxW): 14 x 14 inches, 16 x 16 inches, 18 x 18 inches, or 20 x 20 inches.

Stimulite Slimline Cushion

The Stimulite Slimline Cushion is a foam seat cushions designed for use in wheelchairs. This cushion is made of three layers of honeycomb material, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The cushion is machine washable and dryer safe. The cushion is available with a flat or sling bottom and with a polyester or sheepskin cover. DIMENSIONS (WxD): 14 x 16, 16 x 16, 16 x 18, 18

Stimulite Sport Cushion

The Stimulite Sport Cushion is a foam seat cushion designed for use by individuals who use wheelchairs. This cushion provides shock bbsorption, ventilation, and stability during wheelchair sport activities. It is made from a honeycomb material with a flat bottom, and is available with either a polyester or sheepskin cover. The cushion is machine washable and dryer safe. DIMENSIONS (LxW): 14 x 16, 16 x 16, 16 x 18, 18 x1 6, 18 x 18, 18 x 20, 20 x 16, 20 x 18, or 20 x 20 inches. The cushion is 2 i

Stool For Koala Corner Chair

CUSTOM ADAPTATION PURPOSE: To enable a child with cerebral palsy to us a corner chair with his legs extended in front of him. Since the Koala Chair (see separate entry) was designed for sitting with the knees bemt, an extension stool was built. Made of 10 millimeter (mm) plywood, the stool is basically a box with a top that is height adjustable using a tri-nut. The stool latches to the base of the chair and is padded with fabric-covered foam attached to the stool with Velcro. DIMENSIONS: The fo

Stop Leak Gel Flotation Cushion

The Stop Leak Gel Flotation Cushion is a seat cushion that includes a foam pad for insulation and increased air circulation. Gel concentrate and water are placed in the cushion and mixed to form the gel. The pad features five internal partitions to increase patient stability. DIMENSIONS: 16 x 18 inches. WEIGHT: 12 pounds filled.

Straddlesitter

The StraddleSitter is a straddle seat designed for use by children with physical and neurological disabilities. Designed for children from six months to three years of age, the chair provides support and proper positioning in a long seated position. Made of soft high-density foam, the chair assembles quickly and encourages normal viewing and socializing in a seated position. COLOR: Multi-color.

Straighten Up Posture Aid

The Straighten Up Posture Aid is a back and shoulder brace designed for office workers, travelers, video gamers, students, breast-feeding mothers and golfers,or for individuals with slouching, hunching, and more debilitating conditions, like Osteoporosis. Product retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress.

Straighten Up Posture Aid

The Straighten Up Posture Aid is for persons with a back injury, a disease, condition, or upper extremity disability that causes poor posture. This device helps these persons, retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress. Special sizing.

Strato

Strato is a classroom chair designed for children and young adults from 2 - 19 years. It is suitable for users who are able to get in and out of their chairs independently, but require minimal to moderate levels of postural support. The contoured seat tilts forward to encourage anterior tilt of the pelvis, providing hip stability as well as trunk and lower limb alignment. The design is based on the concept of ‘straddle’ not ‘saddle’, which aims to enhance function and cognitive development. OPTI

Stratus

The Stratus is an air and foam flotation cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The cushion is made of foam with two densities to provide medial and lateral thigh support and has a U-shaped sitting pan. A two-way valve allows the user to adjust the air pressure by letting air in and out of the cushion. The cushion comes with a choice of a regular or an incontinence cover. OPTIONS: Varilite Soli

Stroller Insert.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A solid seat insert for the over-sized strollers with fabric seats. A wooden solid seat and back are built to rest on the metal rails of the stroller. It's covered with foam and an abductor block is attached to the front of the seat. The back can be flat or have angled side as scapular bars. Trunk supports and side blocks can be added if needed. Cover with vinyl. Includes pictures and drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Adrienne Bergen TITLE

Subasis Bars

The Subasis Bars are pelvic stabilizers designed to control posterior pelvic tilt, increased hip extensor activity resulting in thrusting, and/or reducible pelvic obliquity. The aluminum bar is padded with neoprene rubber and upholstered with neoprene rubber backed nylon terry cloth. The bars are available without mounting hardware (model SR-1000) or with three different mounding systems: The Bolt-On Assembly (model ASSB) is designed to be mounted to the bottom of a plywood or plastic seat board

Sunmate Orthopedic Foam

SunMate Orthopedic Foam is foam material of high density open cell elastomeric foam of 5 pound/cubic foot density, with high impact absorption qualities. This foam contours slowly to give uniform pressure distribution and soft springback and is available in extra soft, soft, medium soft, medium, medium firm, firm, and hard densities. DIMENSIONS: Sold in sheets of 16 x 37 inches, 32 x 37 inches, or 37 x 82 inches in a choice of .25, .5, .75, 1, 2, 3, or 4 inches thick.

Sunmate Seat Cushion

The SunMate Seat Cushion is an open cell, contouring foam seat cushion designed to relieve pressure and absorb shock. The cushion is available in a choice of seven pressure qualities ranging from extra soft through hard. OPTIONS: Waterproofing and covers available. DIMENSIONS (WxD): Standard cushions are available in 16 x 16 or 16 x 18 inches and a choice .5, 1, 2, 3, or 4 inches thick. Custom dimensions are available

Super Seat (Model R455), Seat Cushion (Model R456), & Super Mattress (Model R457)

The Super Seat, Seat Cushion, and Super Mattress, are eggcrate foam products designed to allow better weight distribution and air circulation for prevention of decubitus ulcers. The materials are flame retardant and lightweight. DIMENSIONS: The cushion (model R456) is 17 x 17 x 4 inches; the Super Seat (model R455) measures 36 x 18 inches; and the mattress (model R457) is 36 x 74 x 1.75 inches.

Super Star Cushion (Models 3032 & 3033)

The Super Star Cushion, models 3032 & 3033, is a foam seat cushion designed for use by less active wheelchair users who require moderate to high lateral stability and moderate to high pelvic and leg support. This cushion is composed of high resiliency polyurethane and visco foam layers built around an aggressive internal ischial and lateral wedged structure that provides forward and rearward pelvic stability and leg positioning. The internal wedged design provides additional trochanteric sup

Support Chair Adaptation Of The Koala Corner Chair

CUSTOM ADAPTATION PURPOSE: To provide a customized, stable seating and positioning device for a child with cerebral palsy. This device was adapted from a previous adaptation “The Koala.” The Koala is a pedestal seat with a winged back, and is generally used with a seat cushion and pelvic belt. It comes with a large adjustable-height table, which has lipped edges to stop objects from falling off, and latches into position behind the back edges of the seat. The version used by the child with cere

Support For Drooping Head.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A pulley device to assist holding head erect for persons with degenerative disease of the central nervous system. A three foot wooden ski tip has a slot cut in the tip and a stationary pulley is mounted on the back of the ski. The ski is installed vertically in the middle of the back of the wheelchair by use of U-shaped metal clamps which fasten the ski to the back upholstery of the chair. a smaller pulley is attached at midline about 6 inches below th

Supportpro Complete Seat

The SupportPro Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat Drop Seat with a SupportPro Cushion. The adjustable seat platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. A SupportPro

Supportpro Wedge Cushion

The SupportPro Wedge Cushion is a wedge foam or foam and gel seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion is lower in the back than in the front to prevent the user from sliding or thrusting forward. The cushion also features a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer uti

Supportpro Zero Elevation Cushion

The SupportPro Zero Elevation Cushion is a foam or foam and gel and foam seat cushion designed for use in wheelchairs. Available with or without a pommel and with or without QuadraGel, this cushion features a linear design with the same height from front to back and a rounded bottom to prevent hammocking. The cushion has two layers of HR foam for comfort and a firm bottom layer for support. A coccyx cutout relieves pressure. The optional QuadraGel layer utilizes four chambers to keep the gel in

Supporttech Memory Foam Seat Cushion

The SupportTech Memory Foam Seat Cushion utilizes a valve system which regulates air flow in and out of a specialized chamber in the seat cushion which provides ergonomic, customized body-conforming support. The cushion is topped with a thin layer of memory foam for enhanced, personalized comfort. This patented technology provides proper pelvic support which promotes ergonomically correct posture and helps reduce the risk of severe lower back pain. DIMENSIONS: 16.5 inches width x 16.5 inches dep

Supra Sofgel Cushion

The Supra SofGel Cushion is a gel and foam cushion designed for use in wheelchairs. This cushion has a foam base, a gel bladder, and a top layer of foam surrounding the gel bladder. The cover is synthetic fleece on top and waterproof vinyl underneath. DIMENSIONS (HxDxW): 3.5 x 16 x 18 inches. CAPACITY: 250 pounds.

Swimming Noodle Pieces To Prevent Injury

---- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create a light weight, easy to carry foam noodle pieces to protect a child with myoclonic jerks from injuring his- or herself during shopping trips. Using a swimming pool noodle; cut the noodle into sections which can cover the metal areas of the shopping cart. These pieces are easy to construct, light weight, and easy to carry while protecting the child from injuring themselves in the shopping cart. MATERIALS: Swimming pool noodle. TOOLS: Cuttin

Swing Away Pivot Lock, Back Bar Mount Trunk Support (Model 105-3000), & Swing Away Pivot Lock Solid I Back Mount (Model 105-4000)

Trunk support component for adaptive positioning. 1/4 inch contoured ABS plastic base with separate removable pads. Positive locking pivot mechanism. Wide range of vertical, horizontal and front to rear adjustment. Pads can be oriented to body to minimize undistributed pressure. Back bar mounts attach to back frame of wheelchair, Solid I Back Mount attaches to solid back insert with special bracket. Sizes: small 3 inches high by 6 inches long, medium 3 inches high by 7 inches long, large 4 inche

Swing Away Trunk Supports And Brackets

Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with hinges. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Can be ordered with 2 hinges, for stationary rear pads, or 4 hinges, for greater ease of transfers. Pads are 1/2 inch thick medium density foam and 1/2 inch birch plywood. May be o

Swing Away Trunk Supports With Locks

Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with spring loaded aluminum locking mechanisms. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Locking mechanisms allow rear pads to lock into a stationary position for support while front pads are able to swing open. When unlocked, all fou

Swing Open Locking Trunk Supports And Brackets

One pair of custom size pads and custom bent Kydex brackets with spring loaded aluminum locking mechanism. Pads swing away for transfers when released, and lock securely. Secured to solid back with bolts through threaded inserts. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood.

Swingaway Lateral Supports

Lateral supports that can be mounted on LaBac Systems sliding back, on chairs with upholstery mounted on the front of the back posts, and on chairs with upholstery mounted on the back of the back posts. Swingaway feature offers quick client access. Pads available in 3 by 4 inches, 4 by 4 inches, 4 by 5 inches, 4 by 6 inches. Made of molded plastic shell with foam pad. Naugahyde cover. Additional intermediate brackets available.

Swingaway Lateral Trunk Support (Models 31425, 31423, & 32492)

The Swingaway Lateral Trunk Support is designed to provide positioning support for people who use wheelchairs.Model 31425 is a Swingaway Kit with Pad and includes tapered L brackets, a swing-away hinge, an extender, all mounting hardware, and the support pad. The brackets can be arranged in a variety of configurations for flexibility and growth. The extender bracket permits extra flexibility in any direction. The supports flip out of the way while entering and exiting the chair and they have sin

Swivel Cushion

The Swivel Cushion offers the support of a ring cushion with the added feature of a swivel cushion. Its ergonomic design helps to reduce pressure on the spine and tailbone. It is designed for women who are pregnant, new mothers, or anyone recovering from surgery. It can also be used by people with limited mobility while entering and exiting a vehicle.

Swivel Tube (Models 3715, 3715-01. 3716, 3716-01, 3717, & 3717-01)

The Swivel Tube is neck support interface hardware designed for positioning an occipital ring on a wheelchair. The Swing Tube attaches to the hinge bracket on the occipital ring and slides through the tube mount attached to the wheelchair back. DIMENSIONS: The Swivel Tubes are available in 4-, 6-, or 10-inch lengths. COLOR: Available in black and stainless steel.

Swivel Tube Assembly (Models 1501, 1501-01, 1502, 1502-01, 1503, & 1503-01)

The Swivel Tube Assembly is headrest accessory interface hardware designed for positioning an occipital angle bar on a wheelchair. The Swivel Tube Assembly attaches to the rear of the occipital bar and slides through the 90-degree Vertical Tube attached to the wheelchair back. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLOR: Available in black and stainless steel.

Swivel Tube Assembly (Parts 1501, 1501-01, 1502, 1502-01, 1503, 1503-01)

The Swivel Tube Assembly is interface hardware designed for positioning a wheelchair headrest. The Swivel Tube Assembly attaches to the recessed area of the headrest. OPTIONS: A custom made Swivel Tube Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLOR:Both the original and the custom made options are available in black and stainless steel.

Synergel Dimensions Pad

The Synergel Dimensions Pad is a gel flotation seat pad and decubitis pad designed for use by wheelchair users to prevent pressure sores. The pads can improve comfort while protecting boney prominences and preventing or reducing shear, impact, vibration and harmful pressure related problems. The pad is made of of a silicone polymer with the same physical characteristics as human fat tissue. Its cellular structure allows air to circulate between cells to minimize heat and moisture build up. The p

Synthetic Sheepskin Wheelchair Accessories (Models 703010, 703020, 703040, & 703050)

The Synthetic Sheepskin Wheelchair Accessories are a set of wheelchair armrest and legrest pads and seat and back cushion covers designed to provide comfort and protection for people who use wheelchairs. All items are made of high-pile synthetic sheepskin and are nonallergenic. Model 703010 is a pair of wheelchair armrest pads, model 703020 is a wheelchair legrest pad that fits between and over the legrests, model 703040 is a pair of footrest pads, and model 703050 is a set of a wheelchair seat

T Mods (Mod J)

Solid back insert modification for any Freedom Design solid backs. Backs are cut in the shape of a "T" to permit maximum adjustability of trunk supports. Only works with Econo-Ease Hardware.

T-Foam

T-Foam is a foam material designed to eliminate pressure points and absorb shock and vibration. This material is used to make flotations pads, mattresses, cushions, and padding (see separate entries). T-Foam flows to give fluid-like fit and support under body presure and heat so that pressure is evenly distributed. This material becomes firmer when subject to sudden impact and absorbs up to 90 percent of sudden impacts and vibration. When released after conforming to an impression, T-Foam return

T-Gel Cushion & T-Gel Plus Cushion

The T-Gel and T-Gel Plus Cushions are gel flotation seat cushions made of T-Gel, an elastomeric gel with the consistencey of fatty tissue that will slide and move laterally to reduce shear forces. T-Gel will not leak or dryout, and can be cut without harm. The T-Gel Plus Cushions have the same features of the T-Gel Cushions, but with an added layer of 1-inch thick medium T-Foam (see separate entry), a pressure-relieving open-cell foam designed to provide shear reduction, self-molding pressure re

T-Gel Plus Solid Seat Insert Cushion

The T-Gel Plus Solid Seat Insert (SSI) Cushion, models 1294 and 1295, is a combination cushion utilizing the Alimed Solid Seat Insert and a dry flotation T-Gel Plus Cushion (see separate entries). The cushion is intended to correct positioning of individuals in nsling seat style wheelchairs by providing a flatter sitting base. This semi-rigid base is 3.5 inches thick and creates a more stable sitting surface. DIMENSIONS:16 x 16 inches (no. 1294) or 16 x 18 inches (no. 1295).

Tad Tilt-In-Space Chair

CUSTOM ADAPTATIONPURPOSE: To enable a child to have her position changed without leaving the chair. This standard child's tilt-in-space chair, designed by Technical Aids for the Disabled (TAD), Australia, was customized to meet the specific needs of an 18-month old child with Aircardi syndrome with little head and trunk control. Made of plywood, this chair adjusts from upright to 55 degrees of tilt to enable the child to sit upright for eating, drinking, etc. while providing relief from the eff

Tarsalrest Adjustable Foot Support (Model Fr19Aj)

The TarsalRest Adjustable Foot Support, model FR19AJ, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. The extra height with this support is ideal for any one who works on a stool or high chair. The adjustability makes it versatile for different environments or tasks. The non-skid platform is rubbe

Tarsalrest Foot Support (Model Fr19 & Fr19X)

The TarsalRest Foot Support, models FR19 and FR19X, are a foot supports designed to promote proper posture, reduce fatigue and back strain, and relieve stress on the legs, back and neck. They are ideal for providing circulation in the legs and feet. These foot supports feature a chrome frame that is durable and lightweight, a non-skid platform surface that won't damage shoes, and a tiliting support platform that allows users to vary their leg position. DIMENSIONS: Two models available in 3 or 6

Tech Table

Tech Table is a lap tray designed for use by individuals who use wheelchairs or scooters. The unit features a zippered Cordura nylon case with straps with buckles to secure it to the wheelchair, a handle for transfers, and a removable, wipe clean ABS plastic top that is suitable for reading, writing, dining, and recreation. The padded, foam-lined storage area under the top features five organizer pockets and accommodates books, files, pens, wallets, calculators, etc. The case includes two straps

Techkewl Cooling Wheelchair Cushion

The TechKewl Cooling Wheelchair Cushion is a cooling cushion designed for use by wheelchair users with multiple sclerosis or other neurological disabilities. Made of 100-percent cotton, this cushion features Velcro hook and loop attachments, two phase change cooling inserts that maintain a comfortable 58 degree Fahrenheit temperature for up to three hours, and one back seat cushion. SIZE: One size. COLOR: Royal blue.

Teddy Tucker Infant Seat Liner

Teddy Tuckers Infant Seat Liner is a cushion support designed to work in most any type of infant seat. It is also designed to help support and cuddle the baby's total body and to protect it from hot or cold surfaces. This infant product is machine washable and is available in the following type of designer cushions: Teddy bear, panda, duck, lamb or clown. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.

Teen Kore Active Chair

The Teen Kore Active Chair keeps older kids moving and promotes better posture and increased activity. Designed with a gently rounded ergonomic base, its slightly wobbly nature allows the user to move and flex without leaving their seat. This product can be used for teens who have trouble sitting still or could use extra help with strengthening legs, back and abdominal muscles.

Temp Back Supporter & (Models 5311, 5321, 5341, & 5301) & Half Back Wedge (Model 54000)

Contoured lower back support with cutout for hot or cold pack insertion. Velcro closure. Polyurethane foam. Washable corduroy covers. Loop fasteners for chair mounting. Available with or without: hot pack; cold pack; hot and cold pack. Black, Navy, Grey, or Turquoise. Half- back wedge is 12 by 14 inches. Navy.

Temper Foam Sheets

Temper Foam Sheets are foam material designed for a variety of othotic, prosthetic, and rehabilitative applications. This lightweight foam flows under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.It also softens under pressure, temperature increase, and/or humidity and transfers moisture away from the body. Highly resilient, the foam slowly returns to its original form after compression, thus reducing back pressure. The foam available in soft, medium,

Temper Foam Wheelchair Cushions (Models T36, T38, T41, & T47)

Temper foam cushion is a visco elastic foam material that contours to the body. It is available in a variety of thicknesses and densities: T 36, very soft. T 38, soft. T 41, medium. T 47, hard. It comes with a polyester double knit cover. Seat cushions available 16 by 16 inches, or 16 by 18 inches.

Temper Foam Wheelchair Cushions (Models T36, T38, T41, & T47)

The Temper Foam Wheelchair Cushionis a foam seat cushion designed for wheelchair use. These lightweight foam cushions flow under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.They also soften under pressure, temperature increase, and/or humidity and transfer moisture away from the body. Highly resilient, the foam slowly returns to its original form after compression, thus reducing back pressure. The cushions are available in soft, medium, or firm supp

Tempur-Pedic Tp1000 Leather Executive Chair

The patented memory foam and ergonomic design allows the Tempur-Pedic TP1000 Leather Executive Chair to give a user therapeutic comfort and posture stability. The back cushions adjust idependently, letting one customize his or her chair for specialized support.

TFH Resonance Cushion (Model 9Rscn)

The Resonance Cushion, model 9RSCN, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. This cushion can be used in a standars chair or a wheelchair and features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. DIMENSIONS (HxWxD). 18 x 13 x 4 inches.

The Hugster

The Hugster is a pillow designed for a variety of uses such as nursing, pregnancy, infant support, TV/reading, sleeping and back support. It is horsesoe shaped with a velcro fastener that hugs the user. This pillow is made of 100% polyester filling with a cover that is 100% cotton.

The Nest

The Nest is an oversized positioning seat designed for use by children with neurological or severe physical disabilities. This soft seat offers surround-around comfort and security while placing child in correct 90-degree body alignment. The Nest’s center gives way slightly, firming and drawing the sides together for support. Comfortable for one child, it can be used as a place for a child and a therapist to relax and work. This seat is made of rugged nylon. DIMENSIONS: Approximately 78 x 59 inc

Thera-P-Back Cushion

The Thera-P-Back Cushion is a lumbar cervical support designed for use by individuals with lower back and neck pain. This cushion is fully adjustable and designed to help eliminate lower back pain and neck pain while at home, in a car, or at the office. One side is shaped to provide support to lumbar area, and the reverse side is to provide support and comfort to the neck. Features include adjustable Velcro straps and a reusable hot/cold compress. The entire cushion can be micro-waved or place

Theradapt Adult Angle Straddle Bench

The Adult Angle Straddle Bench is a forward tilt seat designed for use by individuals with balance, neurological, or lower extremity disabilities. This bench can be adjusted for use as a a horizontal bench, an angle bench, or a rocking bench (a rocker base is included). The height- and angle-adjustability provided when using the angle base promotes an anterior pelvic tilt, erect sitting posture, and increased weight bearing through the lower extremities. When using the rocker base, the bench enc

Theradapt Posture Chair With Lumbar Support

The TherAdapt Posture Chair with Lumbar Support is a posture chair for preschool/primary or intermediate aged children. The Posture Chair positions child in a semi-kneeling position with forward tilting seat, keeping the back straight and the pelvis in proper position. The seat is height adjustable with dual adjustable knee pads. The chair has front castors. SIZES: Preschool/primary fits children 3 to 4 feet tall; Intermediate fits children 4 to 5 feet tall. OPTIONS: Velcro straps, seat belts, t

Therapedic Positioning Seat For Small Adults (Model 2500)

The TheraPedic Positioning Seat for Small Adults, model 2500, is a car seat that provides positioning and support for individuals with balance disabilities, neurological disabilities, or severe physical disabilities. The seating system includes a five-point harness, shoulder harness pads, lateral positioning pads, adjustable head pads, a crotch strap pad, and a tether strap kit. FRAME: The outside width is 23 inches. SEAT (HxLxW): 33 x 12 x 19.5 inches. The seat is designer blue and angles 95 de

Therapedic Umbrella Stroller (Model 2300)

The TheraPedic Umbrella Stroller, model 2300, is a stroller base for detachable car seat designed for use by children with balance, neurological, or severe physical disabilities. This lightweight folding stroller base accepts the Columbia TheraPedic Positioning Seat (see separate entry). FRAME (HxLxW): The aluminum frame with steel reinforcements is 36 x 45.5 x 24 inches. SEAT (LxW): 15.5 to 18.5 x 16 inches. The distance from the floor to the seat is 24 inches. The seat depth is adjustable and

Therapeutic Fold-A-Buggy (Model Ap 118-15)

The Therapeutic Fold-A-Buggy, model AP 118-15, is a stroller and positioning chair designed for use by children with neurological disabilities or severe physical disabilities. This lightweight buggy provides positioning during transport and folds for storage in a car trunk. FRAME: The steel tubing frame has reversible handles. SEAT (WxD): 13 x 10 to 13 inches. The seat has a three-point positioning belt with a depth adjustable crotch strap. The back height is 21 inches. The back also offers vari

Therapeutic Pillows

Assorted cushions for lumbar or cervical support. Lumbar cushion with saddle hug wings or inverted edges, fits bench or bucket seats. Small dorsi-lumbar cushion 15 by 15 inches square. Large dorsi-lumbar cushion 15 by 19 inches. Lumbar cushions are firm foam with velvet covers. 21 inch twin lobe cervical pillow with smooth or convoluted texture, medium soft foam. Cervical roll 18 by 6 1/2 inches, medium soft polyester fiber. Zippered covers. Assorted colors.

Therapy Bolsters And Stands (Models Cb13 To Cb16 & Cb20)

The Therapy Bolsters and Stands are cylindrical therapy rolls for development of balance reactions, postural alignment and trunk rotation with individuals with neurological or balance disabilities. The bolsters are made of washable vinyl covered foam wrapped around a firm core. Carrying straps are attached to each end. The bolster stands are made of wood. DIMENSIONS (Diam x L): Model CB13 is 4 x 25 inches, model CB14 is 6.5 x 40 inches, model CB15 is 8.5 x 43 inches, and model CB16 is 10 x 50 in

Theratray (Models 31100 & 31105)

The Theratray, Models 31100 and 31105, are lapboards designed for use by people who use wheelchairs. The trays are fabricated of polyurethane foam to eliminate sharp edges, and strengthened by a 0.25-inch Aspernite wood insert. Both models include a fully molded rim and straps. DIMENSIONS: The Adult model (no. 31100) is 23.5 x 22 inches, with a 15 x 9 inches torso cutout. The oblong juvenile size (no. 31105) is 26.5 x 24 inches, with a 10.5 x 6 inches torso cutout. WARRANTY: The manufacturer war

Thigh Cuffs & Solid Seat Mount (Model 108-1000) And Lateral Hip/thigh Support Mount (Model 108-2000)

Padded thigh straps mount to solid seat of wheelchair. Sizes: small 7 to 10 inches circumference, medium 10 to 13 inches circumference, large 13 to 17 inches circumference, extra large specify circumference.

This Is A "hold-Up"!

This is a "Hold-Up"! is a torso support designed for use by individuals who lack trunk control. This one-piece butterfly-shaped support is made of nylon-covered closed-cell foam and features extended shoulder straps and elastic for comfort. It is compatible with most wheelchair seating systems and may be adapted for use with wheelchairs, high chairs, strollers, suppine standers, and more. The heavy-duty nylon covering is hand-washable OPTIONS: Custom adaptations and a gastric tube opening. SIZES

Thomashilfen Easys Stroller

The Thomashilfen EASyS Stroller is a child's stroller with a positioning seating system designed for use by children with neurological, mobility or severe physical disabilities. The stroller consists of a lightweight folding A-Chassis frame and the EASyS modular seating system. This stroller includes the Balance Safety System (BSS) to reduces the risk of the stroller tipping over by automatically sliding the seat forward when reclining the backrest, which shifts the center of gravity to a more s

Three Sided Box.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Prevents a child positioned on a wedge cushion from rolling over or sliding down in seat. For use in conjunction with a 10 by 5 inch Tiny Tot wedge. Wooden box has two 20 by 10 inch sides mounted on a base 20 by 13 inches. Includes photograph. SKILLS REQUIRED: Woodworking. AUTHOR: Glickman, L. TITLE: Physical Therapy. REF: Journal: Vol 61 No 1, January. 1981.

Thriftytray (Models 31128, 31129, 31255, 31256)

Thriftytrays are lapboards designed for attaching to wheelchairs. These hardboard trays have rectangular work surfaces and are available in four models: Model 31129 is an adult tray with straps; Model 31128 is an adult tray with foam pads and straps; Model 31255 is the extra-wide tray with straps; Model 31256 is the extra-wide tray with foam pads and straps. DIMENSIONS (WxD): The adult trays are 23.5 x 22 inches with a 15 x 9 inch torso cutout; X-wide trays are 25.5 x 22 inches with a 15 x 9 inc

Tilt-A-Tray Adjustable Wheelchair Tray (Models H70670-0000 & H70670-0001)

The Tilt-A-Tray Adjustable Wheelchair Tray is a swing away lapboard designed to adjust vertically and tilt forward and back. The tray is attached to the wheelchair frame and swings away for access to the chair seat. The tray is made of clear polycarbonate and has front and rear edge bars. The right side is mounted to a hinged bar and the left side is held by suction cups mounted to adjustable bars. Fittings are molded of high-strength ABS plastic. Extension rods and braces are made of stainless

Tilt-In-Space Chair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted tilt-in-space chair for a child with multiple disabilities. This adaptation is designed for children with special support needs, the child can be tilted back from an upright position to a 45 degree recline. This type of chair is useful for when a child needs to be upright for certain activities such as eating, but cannot tolerate this position for long periods of time. The child was measured for accuracy and the chair was m

Tilt-In-Space Chair

CUSTOM ADAPTATION PURPOSE: To provide a child with global developmental delays and low muscle tone with appropriate seating and positioning. The chair is made of lightweight plywood and is angle-adjustable from upright to 45 degrees reclining using trinuts. This enables the user to sit upright for as long as can be tolerated and then recline as needed. The chair is equipped with a tray clamped to metal slides, making it adjustable in height and tilt, and enabling it to follow the angle of the c

Time Tracker Mini

The Time Tracker Mini is designed for preschool and elementary school students who have time management challenges as it helps children manage their time during school and home activities. Offers visual and auditory indicators with 2 dials: total alarm time and warning time. The Time Tracker Mini quietly counts down and when time is up, the colored light glows and the alarm sounds. Mute option available to mute sound and use only the light as an indicator. Warning feature signals a few minutes b

Tms Padded Chair Belt

Padded belt support. Two 12 inch long canvas pads with webbing strap sewn at one end. Straps attach under wheelchair upholstery screws and canvas pads fit across abdomen. Velcro closure.

Tms Padded Chair Belt

Belt for wheelchair, webbing straps for attachement to chair, Wide padded canvas body strap, two rows of velcro for closure.

Tms Slat Back (Models 2210, 2010, 2208, & 2208)

Alternative to solid back insert or soft back cushion. Slatted, padded back inserts provide stabilty without the rigidity of a solid back insert. Can also be used as a back extension providing 2 to 4 inches over the standard upholstery. A non-skid extension lays flat on the wheelchair seat, or under a seat cushion to prevent the back cushion from shifting. Standard adult (2210) 22 inches high, 10 slats wide. Standard adult (2210) 20 inches high, 10 slats wide. Narrow adult ( 2208) 22 inches hgih

Tms Solids, Solid Insert Seats And Backs

Solid seat and back inserts. Plywood base with padded foam and vinyl cover. Available in standard adult, narrow adult. Fits over regular seat and back. Back secured over push handles with fabric loops.

Toddler Kore Wobble Chair

Toddler Kore Wobble Chair is a seat design to allow movement when children are required to sit. The base of the Toddler Kore Wobble Chair is designed to allow movement in 360 degrees and to remain upright without tipping over. When the user stands up, the chair stays in place. The Toddler Kore Wobble Chair will allow rocking from side to side, front to back or anywhere in between. The constant motion of the chair provides feedback to the brain to help the child understand where their body is in

Toe Loop (Model 82)

The Toe Loop, model 82, is a toe strap designed to prevent the user's foot from slipping forward off the wheelchair footplate. The strap is equipped with buckles for adjustment and are attached to the front of the footplate.

Toilet Seat And Commode Seat Dry Floatation Cushion

Toilet seat Dry Floatation Cushion consists of 2 separate pieces that can adjust to any toilet size. Straps are built into cushion to attach to toilet seat. Contoured air cell sizes, with 2 inch cells on the outside and 1 inch cells on the inside to provide greater seated stability. Weighs approximately 1 1/4 pounds. Commode seat Dry Floatation Cushion is designed to fit commode wheelchair and is custom sized to seat's specifications. Standard size is 16 3/4 inches by 16 3/ 4 inches. Weighs appr

Top Drop Clamp Attaching System (Model 31070)

The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d

Top Mount Multiple Adjustment Headrest Bracket And Pads

Three custom size pads mounted on angled Kydex or aluminum bracket which attaches to shoulder height solid back. Mounting knob in solid back secures headrest, allowing it to be removed. Hardware allows height, tilt, and forward and back adjustment. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately. Components: $50.00 to 40.00 brackets, $134.00 headwing bracket and pads.

Torso Support

The Torso Support is designed to prevent unwanted forward or lateral movement and to maintain mid-line positioning for individuals with severe physical or balance disabilities while seated. This support strap is available in double loop fabric or nylon webbing in models for use with rigid-back or solid back wheelchairs with a non-folding seat, folding wheelchairs, reclining whelchairs, one-person bench seats with non-divided back, or a two-person bench seat with a non-divided back. A multi-adjus

Total Comfort Cushion

The Total Comfort Cushion is a seat cover for wheelchairs designed to reduce friction and pressure sores. Constructed of soft, fluffy polyester fiberfill, this cushion covers the seat and back and arms of most standard wheelchairs and armchairs. This fully washable cushion has a polycotton cover.

Transparent Trays

Transparent Trays are lapboards made of a see through polycarbonate plastic. The trays enable open visual field for safer wheelchair mobility. Several models are available: an adult model with an anodized aluminum rim (no. 8696, $67) and an adult model without a rim (no. 8242, $72.33) with Velcro straps, and a pediatric model (no. 8306, $105.45) with Velcro straps. DIMENSIONS: Adult size models are 23.5 x 22 inches; pediatric size is 20.5 x 18 inches; all models are .25 inches thick.

Travel Cushion

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seat cushion for a senior with advanced osteoporosis. Using previous cushions as a model, a new set of cushions that are 420 by 475 millimeters and joined by a 75 millimeter spine, with a 50 millimeter-thick Dunlop Enduro foam filling were created. The long-wearing fabric covers are zippered so they can be taken off for washing. Two pieces of 39 millimeter wide webbing form the handles. The travel cushions have made it poss

Travelin' Toddler's Car Cushion

The Travelin' Toddler's Car Cushion is a head support, polybag cushion designed to offer support and comfort while sleeping for children when traveling. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.

Tray Attachment

This Tray Attachment is a wheelchair lapboard, to be used in conjunction with the "Bowling Ball Holder Ring". This attachment converts the Bowling Ball Holder Ring into a tray which may be used for dining, letter writing, as a class desk, etc. The tray is made of a waterproof material.

Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)

The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.

Tray Clamps (Model 31086)

Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.

Tray For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the tray was fashioned of PVC with a lip at the front made of aluminum angle to prevent items from falling off. The tray attaches to the wheelchair with Velcro for attachment and removal. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2, Winter 2001: p. 17. PAGES (including cover): 2 2001.

Tray Stay Clamping System (Model 31085)

The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad

Traymate

Plastic tray that fits on arm of wheelchair or upholstered chair. Perpendicular leg rests against inside of chair arm, adjustable spring loaded leg locks tray in place on outside of chair arm. Cut out for cups. 9 by 13 inch surface. Folds for storage. Washable. Fits also on hospital beds.

Trays & Hardware

The Tray and Hardware are a lapboard and mounting hardware designed for wheelchairs. The polycarbonate tray may be ordered with or without flip locks. Requires cutting out for trunk, sanding edges, and mounting of flip locks. OPTIONS: Tray elbow protection pads also available as individual or full pad. Mounting hardware may be ordered separately. DIMENSIONS: 18 x 24 inches (Small) and 24 x 27 inches (Large).

Triangle Chair

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Triangle chair to provide back and side support and to keep a child's legs apart. Describes chair made of 3 quarter-circles of plywood fastened together to make seat and support sides; 2 dowels are fastened to the front of the seat to keep the child's legs separated. This can be used on the floor or fastened to a standard chair. SKILLS REQUIRED: Woodworking. AUTHOR: Finnie, N R TITLE: Handling the Young Cerebral Palsied Child at Home REF: New York: E P

Tricycle Back Support

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation for a child with difficulties in supporting herself in the standing or sitting position; which allows her to ride her tricycle while providing firm support to hold her upright and her feet in place. The back support is built from 1/16 inch by 1 ½ inch metal strapping welded to the vertical tube just under the sat and shaped to provide a vertical “post” just behind her back. The vertical portion is in two parts with a se

Trimline Comfortline Armrest Series

The Trimline Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests are foam-padded and covered in satin finish vinyl. The armrests are available in fixed and flip-away styles for both right and left wheelchair arms and feature a molded cup holder recess. DIMENSIONS: .5 x 10.5 inches wide at the widest point, tapering to 6 inches x 22 inches. The foam padding is 1 inch thick. COLOR: Bl

Trimline Viewline Plus Armrest Series

The Trimline Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. Fabricated of transparent, unbreakable, scratch- resistant polycarbonate, the armrests are available in fixed or flip-away styles for both right and left wheelchair arms in tray only and tray with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 10.5 inches wide at the widest point, tapering to 6 inches. COLOR: The PVC plastic rims are black. WARRA

Trimline Woodline Light Reversible Armrest

The Trimline Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest has a clear lacquer finish and is designed to be assembled by the user in a right or left configuration. The necessary mounting hardware is included with the fixed model, Number 31302, and the flip-away model, Number 31309. DIMENSIONS: Both models are 3/8 inch thick x 22 inches deep x 10.5 inc

Tripp Trapp Chair

The Tripp Trapp Chair is an adjustable positioning chair designed to fit all people, infants through adults, with physical and neurological disabilities. Users should have some head control for maximal use since no specific head support is built onto the chair. The seat depth, back support, and foot support are adjustable and functional at any standard table. The wood construction of the chair allows possible modification for increased head support. OPTIONS: 3-inch abduction pommel, foot placeme

Trunk Pad

Lateral trunk support pads. Naugahyde covered foam. T nuts with 1 or 2 inch spacing for mounting to brackets. Curved rectangular, or pear- shaped pad. 3 to 6 inches high by 4 to 7 inches deep.

Trunk Pad (Models 1350, 1351-01, -21, -31,-32, -33, 1360, 1361-01, -21, -31, -32, -33, 1370, 1371-01, -21, -31, -32, & -33)

The Trunk Pad is a torso support designed for use by individuals with severe physical disabilities or spinal cord injury while seated in a wheelchair. Curved to fit body contours, it can adapt to many positioning applications. The Trunk Pad is made of 16 gauge steel, zinc-plated, and formed with recesses for ##10-32 press nuts to attach it to the back of a wheelchair. The recessed area is placed, vertically, in the middle of the pad. The Trunk Pad is padded and is available covered with a variet

Trunk Stabilizer.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Trunk stabilizer for positioning person with cerebral palsy in wheelchair. Cloth vest is fabricated with a channel sewn into each side. Dental dam, a soft elastic material, is folded to a width of 4 cm and cut in lengths of 200 cm. The dental dam material is threaded through the channels of the vest with the bottom straps are passed around the chest and tied in back of the wheelchair. The top strap ends pass over the shoulders, down the back between th

Trunk Supports And Brackets

Custom size trunk pads mount to solid back with T-nuts and bolts, or clamp to wheelchair uprights. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. Brackets are Kydex ($206) or aluminum ($195) and are bent to custom angles. Back-mounting brackets are slotted to allow adjustment of width, and adjust in height by relocating. May be ordered complete, or brackets and pads may be ordered separately.

Tube Arm Bracket Attaching System (Models 31902 & 31907)

The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.

Tufloat Cushions (01-3000 Series)

Foam seat cushions for medium to high flotation. Sizes: 16 by 16 inches by 2, 3, or 4 inches thick; 18 by 16 inches by 2, 3 or 4 inches thick. 90 indention load deflection. Includes zippered washable double knit cover. Optional: various cutouts, special depths or widths, and naugahyde, shelterite or synthetic lambswool covers.

Tumble Forms 2 Conform Seat and Back Foam Cushion (Model 4327)

The Tumble Forms 2 Conform Seat and Back Foam Cushion, model 4327, is a contoured seat and back cushion designed to provide extra support for wheelchair users. The durable urethane foam cushion conforms to the natural body shape, and features a strap to prevent slipping. It is latex-free, and has a removable, washable polyester cover.

Tumble Forms 2 Mobile Floor Sitter

The Tumble Forms 2 Mobile Floor Sitter is designed to enable moving a properly positioned child with physical disabilities to another area or activity without having to reposition. The mobile base for the medium and large models are made of wood with the Tumble Forms covering and locking ball casters. The extra large mobile base is made of steel tubing with locking casters. The units come complete with a Feeder Seat (see separate entry) and Mobile Base, or the Mobile Base may be ordered separate

Tumble Forms 2 Tadpole Pediatric Positioner (Model 4772T)

The Tumble Forms 2 Tadpole Pediatric Positioner, model 4772T, is designed specifically for early intervention programs serving infants from birth to three years of age with cerebral palsy, motor delays, or other motor dysfunctions. The Tadpole allows the therapist to position the child/infant in prone, seated, postural drainage, and side-lying positions. The unit includes the base, one half roll with lateral supports, a half roll, a positioning strap, and a tray with mirror. It also comes comple

Tumble Forms 2 Universal Corner Chair with Removable Tray (Model 4590U)

The Tumble Forms 2 Universal Corner Chair with Removable Tray, model 4590U, is a corner seat positioning chair designed to fit children up through adolescence or up to 60 inches tall (152 centimeters). The chair has a broad base to help prevent tipping due to extensor thrusting, and a built-in abductor block which supports a tray (included). The foam padded seat and back support have a hip positioning belt and height adjustable H-harness support. The chair’s padding allows the child to maintain

Tumble Forms Abductor Wedge (Model Pc 4768B)

The Tumble Forms Abductor Wedge, model PC 4768B, is a knee separator with Velcro strips that can be attached to Tumble Forms Wedges or Tumble Forms Deluxe Strap Wedges (see separate entry). DIMENSIONS: 5 inches high. COLOR: Red or teal.

Tumble Forms Carrie Collar (Model 2774C)

The Tumble Forms Carrie Collar, model 2774C, is a head and neck support designed to support the jawline and occipital region to help improve head control, neck flexion, and midline positioning for children who have physical disabilities. The collar may be used alone or with other seating systems. The horseshoe-shaped collar slips over the head, extends to the chest, and fastens in the front with a quick-release hook-and-loop fastener. The collar features the Tumble Forms waterproof coating.

Tumble Forms Carrie Seat (Models 4641L, 4641M, 4641S, & 4641Sa)

The Tumble Forms Carrie Seat, models 4641L, 4641M, 4641S & 4641SA, are positioning seating systems designed for insertion in mobility systems such as strollers, wheelchairs, or in vehicles. They may also be used at home or in school. The seats come with an adjustable footrest, headrest, and tray. Standard features include an anti-thrust seat to stabilize the pelvis; a seat back which articulates 20 degrees to accommodate abnormal trunk tone; an adjustable footrest to maintain hip, knee, and

Tumble Forms Deluxe Square Module Seating System (Models 2797 & 2795P)

The Deluxe Square Module Seating System, models 2797 and 2795P, are floor sitters designed to support and position children with neurological disabilities. The complete seating system (2797) includes the seat and the following geometric positioning shapes: 2 long and 2 short rectangles, 2 triangles, 1 ring, and 1 disk. The positioning shapes only (minus the base seat) are available separately (2795P). The modules are vinyl covered foam with rounded edges. The child sits in the chair with his/her

Tumble Forms Extra Large Deluxe Floor Sitter

Tumble Forms Floor Sitters feature integral abductor, hip positioning strap and quick release H-belt. The exclusive Tumble Forms coating makes them easy to wash and maintain. Tumble Forms seamless covering is washable, odor and stain resistant, impervious to urine, and nontoxic. The Feeder Seat's contoured interior has a 90 degree seat-to-back relationship to encourage correct seating posture. Shoulder harness slots allow 4 inches of vertical adjustment of the shoulder straps.

Tumble Forms Feeder Seat (Series Pc 2795)

The Tumble Forms Feeder Seat is designed to provide secure trunk positioning and posturally correct seating for infants or children with physical disabilities while feeding, learning, or resting. The seats feature a contoured interior with a 90-degree seat-to-back orientation, a 45-degree hip strap, and a quick-release H-belt shoulder harness with slots allowing 4 inches of vertical adjustment. The seats may be used in a chair or stroller, on the floor, or on a parent's lap. The Tumble Forms' se

Tummy With Mummy

The Tummy With Mummy is a foldaway baby & toddler seat with a built-in angled tummy-time platform. It includes a soft fleece mat and safety harness. An infant can use the seat for tummy-time play or to have more face-to-face interactions without lying on his or her back.

Tush-Cush & Car-Cush

The Tush-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, the cushion has a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable cover. The Car-Cush is a smaller version of the Tush-Cush and offers the same features. The Tush-Cush is available with a choice of a velour cover, a coated vinyl generaltional fabric cover, or a faux leather c

U Form Deep Contour Back

The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg

Ulti-Mate Cushion

The Ulti-mate Cushion is a foam seat cushion designed for use with wheelchairs. This cushion features built-in pre-ischial bar to transfer weight from ischial region to posterior thigh, lateral bevels on underside of cushion to accommodate the sling of the wheelchair for optimal base of support, and built-in leg channels to promote neutral leg position and help stabilize upper body. The cushion uses a combination of foams which adjust to different body weights and sizes, including a top layer of

Ultimate Car Seat

The Ultimate Car Seat is designed for use with children with balance, neurological, orother physical disabilities. This seat features fully-adjustable padded head supports and a five-point harness. The included positionining pad set can be used to provide support for smaller children. OPTIONS: Seat depth extender. DIMENSIONS: The inside width is 15.5 inches in the front and 14 inches in the back. The overall dimensions are 28 x 19 inches. CAPACITY: 20 to 102 pounds. WEIGHT: 11 pounds

Ultimate Stroller Base

The Ultimate Stroller Base is a stroller for detachable car seat designed for use with children with mobility, balance, walking, or severe physical disabilities. Designed to be used as a mobility base for the Ultimate Car Seat (see separate entry), the folding, lightweight aluminum stroller has a locking mechanism that holds the car seat at a 20-degree angle. The stroller features a height-adjustable foot rest, foam-padded handles, and foot-operated wheel locks. DIMENSIONS (HxLxW): 39 X 35 x 23.

Ultra Comfort Wheelchair Cushion

The Ultra Comfort Wheelchair Cushion is a gel and foam seat cushion designed for use by individuals with mobility disabilities. This cushion has a gel-like inner core. The top of the cushion is made of anti-microbial fabric and the bottom half is made of nylon pack cloth. A built-in fabric handle aids in carrying. DIMENSIONS: 17.5 x 18.5 x 2 inches. CAPACITY: 325 pounds.

Unilateral Facial Component (Models Ufc-1,-2,-3 & -4)

The Unilateral Facial Component, models UFC-1, UFC-2, UFC-3 and UFC-4, is a support designed for holding one side of the face or head for individuals who have difficulty holding their head in a mid-line position. It is similar to the Lateral Facial Component but is recommende for providing additional support to the individual with mild ANTR. The single adjustable pad can be positioned for greatest support and then locked securely into place using ball and socket brackets. It comes in four differ

Universal Arm Mount (Model 347-Ua503)

The Universal Arm Mount, model 347-UA503, is a mounting clamp for wheelchair accessories designed specifically for attachment of the MYDESC EZ-Removable Arm (see separate entry). This metal clamp block can be used with wheelchair tubing from 0.75 to 1.25 inches in diameter, and provides a 0.78 inch cylinder slot for mounting the EZ-Removable Arm directly to the wheelchair frame. The clamp may be mounted either horizontally or vertically.

Universal Bracket System

The Universal Bracket System is a set of brackets designed for mouting trays and lapboards on wheelchairs. These lightweight brackets are height- and width-adjustable to fit any wheelchair with standard arms. The rust- and corrosion-resistant brackets are removable for transfers and emergencies and they feature safety stops to prevent the tray from being pushed into the user.

Universal Corner Chair

The Universal Corner Chair is a positioning chair designed for use by children and adolescents up to 60 inches with upper extremity, neurological, mobility, or severe physical disabilities. This chair aids in keeping a child’s shoulders flexed to help better focus on fine motor activities. It is also helpful in maintaining leg extension and extensor thrust. Features include an abductor block, hip positioning belt, height-adjustable H-harness and removable tray with folding support that rises to

Universal Headrest Mounting Plate (Model 7730)

The Universal Headrest Mounting Plate is seating hardware designed for use with wheelchair headrests. This plate enables a variety of headrests from various manufacturers to be interchanged as needed. The headrests may be changed without having to redo the T-nuts in the back.

Unreal Lambskin Medi-Pads & Softtouch Bed Pads

Unreal Lambskin Medi-Pads and SoftTouch Bed Pads are decubitus pads of synthetic sheepskin for pressure relief and prevention of decubitus ulcers. The pads have 3/4-inch pile, are stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resistant to packing down. The pads can be cut to any shape without unraveling. DIMENSIONS: Medi-Pads are available in 24 x 30 (Small), 30 x 40 (Medium), 30 x 60 (Large), or 35 x 80 (hospital bed) inches. SIZES: Bed Pads are avail

Unreal Lambskin Wheelchair Accessories

Unreal Lambskin Wheelchair Accessories are decubitus pads for various pressure points including the seat, back, arm and footplates. These covers are made of synthetic fleece for pressure relief and prevention of decubitus ulcers. The material consists of 3/4-inch pile and is stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resists packing down. Foot plate, arm and removable desk arm pads are sold in pairs. BACK COVER: Fits all standard adult wheelchair mo

Up-Down Chair, The

The Up-Down Chair is a youth positioning chair designed for use by children with mobility disabilities. This chair enables children from 43 to 63 inches tall to participate in activities at any level, from floor to table top without leaving the chair; a foot lever enables a caregiver to adjust the seat to floor height as needed. Other standard features include push-button tilt-in-space adjustment from zero to 25 degrees, adjustable seat depth, height adjustable armrests, a height adjustable foot

Upeasy Power Seat (Model Upe-P100)

The UPEASY Power Seat, model UPE-P100, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair or sofa with arms, and when the user sits on it and pushes down on one of the two power levers, it gently lowers the user to a seated position. To rise, the user pulls up on one of the power levers and pla

Upeasy Seat Assist (Models Upe 1 & Upe 3)

The UPEASY Seat Assist converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and when the user sits on it, it gently lowers the user to a seated position. To rise, as the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of the user's weight. This cushio

Uplift Premium Power Seat (Models Ps3017 & Ps3020)

The Uplift Premium Power Seat, models PS3017 and PS3020, is a seat lift cushion that converts any chair or sofa with arms to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on the chair or sofa, and when the user is ready to rise, he/she uses the toggle switch on the hand controller extending from the base on a gooseneck to begin the upward movement, and pla

Uplift Seat Assist (Models Med-Ul 100 & Med-Ul 300)

The Uplift Seat Assist, models MED-UL100 and MED-UL300, is a seat cushion with lift that converts any chair to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on any chair and the selector is set to the weight of the user. As the user begins to shift weight to rise, the seat automatically provides a supported, stable horizontal assist, lifting 80 percent of

Uplift Standard Power Seat (Model Ps1000)

The Uplift Standard Power Seat, model PS1000, is a seat lift cushion that converts any chair or sofa with arms to a seat lift chair for use by individuals with neurological, lower extremity, or mobility disabilities or arthritis who have difficulty rising from a seated position. The cushion is placed on the chair or sofa, and when the user is ready to rise, he or she pulls up on the power lever and places his or her hands on the arms of the chair or sofa to activate the seat, which automatically

Upper Trunk Support System & Solid Back Mount (Model 106-3000)

Upper trunk restraint, shoulder retraction straps mounted at bottom to adjustable chest strap. 1 inch neoprene padded sleeve, quick release side buckles. Mounts to solid back. Sizes: small for 9 to 14 inches sitting height, medium for 14 to 20 inches sitting height, large for 20 to 28 inches sitting height.

Urine And Turn Alert With Bar Graphs (Model 1096)

The Urine and Turn Alert with Bar Graphs, model 1096, is an incontinence alarm and timed reminder signal designed for use with individuals with severe physical disabilities and incontinence. The unit clips to the user's clothing and features a sensor which is placed where wetness is to be expected. When moisture is detected, lights flash indicating the time in 20-minute increments that the wearer has been unchanged. The unit also alerts caregivers in two-, four, and six-hour increments as to whe

Vac U Mat

Vac-U-Mat is a molded cushion that can be used in bed or in a wheelchair. The mat is vinyl laminated to 70 denier nylon, with a vinyl coated polyester scrim bottom. Filled with polystyrene beads. when vacuum is applied the beads become rigid but conform to the body position for total support. Can be used with optional waist, shoulder harness and leg restraints.

Valueview Tray (Model 3115)

The Valueview Tray, model 3115, is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): 23.5 x 19 inches. The straps are one inch wide. The tray is 0.25-inch thick. WARRANTY: This product is warranted against defects in workmanship and materials for 90 days from the date of purchase.

Varilite Backrest & Varilite Split Backrest

The Varilite BackRest and Split BackRest are inflatable back support cushions designed for use by individuals with mobility disabilities, spinal cord injury, and others who need back support. The cushions offer lower lumbar support and promote spinal extension during wheelchair use, extended car rides, air travel, and in office chairs. Support encourages upright sitting posture and decrease muscle fatigue. Cushions have a mesh cover with reticulated foam that wicks moisture away from the skin. A

Varilite Cheat Sheets

Varilite Cheat Sheets are sheets of foam material designed for customized wheelchair seating for use by individuals with balance disabilities, lower extremity disabilities, mobility disabilities, and spinal cord injury. The Sheets are made of closed-cell foam with adhesive backing, and can be used for for building contours, changing pressure loading patterns, and improving the overall fit and function of a seating system. Sheets bond instantly and may be cut to exact size using only scissors or

Varilite Drop Base System

The Varilite Drop Base System is a wheelchair cushion drop base designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This system lowers the wheelchair seat base for individuals who need to be lower to the ground to self-propel or who have difficulty transferring to a higher surface. The system includes a base constructed from durable PVC plastic and L-J brackets made of hardened steel. The brackets allow up to four inches of height ad

Varilite Seating System Adult Regular

Seat cushion with a molded base. Includes Varilite self-inflating foam cushion and urethane bladder, with a washable knit cover. The opening of valve determines the level of support and the shape of the cushion through inflation and deflation. Weight is 2.9 pounds. Two sizes. Adult: base 17.5 by 16.25 inches. Narrow Adult: base 15.5 by 16.25 inches.

Varilite Solid Insert

The Varilite Solid Insert is a solid seat insert designed for use in wheelchairs by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This insert is placed between the cushion and upholstery or directly inside the cushion cover to eliminate the effects of sling upholstery. Inserts are available to accommodate pediatric as well as adult users. They are made from durable plywood with rounded edges and sanded surfaces to reduce chance of splintering or pu

Vel Float Wheelchair Cushion (01-1000 Series)

Cushion is constructed of high resiliency medium firm, open cell polyurethane foam. Polyester knit covers with wraparound zippers are provided and included in cushion price. Special sizes available on order at extra cost. Standard sizes are 16 inches by 16 inches by 2, 3 or 4 inches, and 18 inches by 16 inches by 2, 3 or 4 inches.

Velcro Closure Armrest Mount For Lapboard (Model 08-1000)

Lapboard with velcro closure, mounts on armrest. 1/4 inch clear acrylic. Sizes: 26 by 24 inches with 15 by 19 inch body cutout, 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/ 2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Velcro Closure Safety Strap For Wheelchairs (Model H70623)

The Velcro Closure Safety Strap for Wheelchairs, model H70623, is a wheelchair seatbelt made of Velcro closure with metal D-ring buckles. The belt is adjustable, washable, and can be sterilized. The strap can be positioned at various heights to insure user comfort and security. A short strap anchors to the wheelchair frame while the long strap adjusts in length. DIMENSIONS: 32 inches long x 2 inches wide.

Velcro Closures Armrest Mount, Birch Lapboard (Model 08-4000)

Lapboard of birchwood with waterproof seal and plastic rim. Armrest mounting, velcro fasteners. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Custom cutouts, widths and depths available.

Velcro Wheelchair Straps (Models 107, 109, & 700)

Velcro wheelchair straps. 4 inches wide, various lengths. Constructed with stainless steel cinch ring and metal grommet for chair attachment. Includes storage feature for when not in use.

Velfoam

Velfoam is foam strap padding that can be used as a splint or strap liner, protective padding, or cushioning media. Velfoam is breathable, hypo- allergenic, odor-free, and backed with knitted loop fabric. Velfoam attaches with Velcro hook tape or Velcoin hook self-stick fastener. This padding is washable and sterilizable. DIMENSIONS: 6 inches wide; sold in 5- yard box. COLOR: White.

Velfoam ##2

Velfoam ##2 is Velcro foam strap padding designed for persons with physical disabilities. The cushion-soft material can be used for pading, straps or body support. The polyfoam strip is faced on both sides with Velcro loop and is ready to use with hook material. The material is washable and sterilizable. DIMENSIONS (LxWxT): 5 yards x 2 inches x 0.25 inch.

Velfoam 2

Velfoam 2 is foam strap padding with hook and loop fasteners for padding, straps, or body support belts. The 1/4-inch thick polyfoam strip is faced on both sides with Velcro loop, ready to use with hook material. Velfoam is washable and sterilizable. DIMENSIONS: Sold in two widths: 2 or 6 inches; 5 yard boxes. COLOR: Beige.

Vertically Adjustable Solid Back Mount Head/neck Support (Model 107-1000) & Multi Adjust Head/neck Support (Model 107-2000)

Head and neck support component for adaptive positioning. 4 3/4 inch range of vertical adjustment, or Multi Adjust mounts with bracket to permit vertical, front to rear, tilt and rotational adjustment. 1/4 inch ABS plastic, with separate removable foam pad. Shape allows posterior support at the occiput and rotational control without ear irritation. Mounts on solid back. Sizes: small, medium, large and extra large. Options: custom sizes, hydrocephalus modification, off set mounting. Accessories:

Vest, H Style Vest, & Butterfly Style Vest

Vest has 4-inch velcro chest piece, 2-inch velcro shoulder straps, and D-rings or buckles for attaching to solid back and/or lateral trunk supports. H-style vest has 2-inch velcro hip strap, 2-inch velcro shoulder straps, 2-inch cross piece to keep straps from sliding off shoulders, and D-rings or buckles for attaching to solid back. Butterfly style vest had vinyl pad with medium density foam over a leather form with 2-inch velcro shoulder and hip straps and D-rings or buckles for attaching to s

Viewline E-Z Lock Quik-Fit Trays (Models 33000P, 33001P, 33002P, 33017P, 33000, 33001, 33002, & 33017)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33000P, 33001P, 33002P, and 33017P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits w

Viewline Plus Extended Wing Trays (Models 31226, 31224, 31227, & 3125)

The Viewline Plus Extended Wing Trays are lap trays designed for use with wheelchairs. These moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 31226 and 31227 have a black PVC rim. The other models do not have a rim. The extended wings are designed to fit around the back uprights of the chair and they accommodate growth. SIZES: Small and large. DIMENSIONS (WxD): The small models (nos. 31224 and 31226) are 19.5 x 23.5 inches with an 11.5-inch wide torso c

Viewline Plus Series

The Viewline Plus Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of transparent, unbreakable, scratch-resistant polycarbonate, and are available in tray only, tray with rim, tray with straps, and tray with rim and straps models. The juvenile tray has an oblong work surface; all other trays are rectangular. OPTIONS: Tray rims are available in a choice of anodized aluminum or PVC plastic. SIZES: All models are available in child, juvenile, adult, and extra-w

Viewline Series

The Viewline Series are lapboards designed for use by people who use wheelchairs. Constructed of transparent polycarbonate, models include the tray only, tray with anodized aluminum rim, tray with straps, tray with rim and straps, and the tray with the Quad Care Attaching System (see separate entry). The juvenile tray has an oblong surface; all other trays are rectangular. SIZES: The tray with the Quad Care attaching system is available in an adult size only; all other models are available in ch

Viewline Top Drop Quik-Fit Trays (Models 33006P, 33008P, 33010P, 33013P, 33006, 33008, 33010, & 33013)

The Viewline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33006

Viewline Top Drop Quik-Fit Trays With Control Cutouts (Models 33025, 33026, 33027, 33028, 33029, 3330, 33031, 33032, 33033, 33034, 33035 & 33036)

The Viewline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout i

Vinyl Inflatable Ring (Model 7005)

Vinyl Inflatable Ring is an inflatable ring seat cushion. The firmness is determined by the amount of inflation. DIMENSIONS: 15 inches x 16 1/2 inches.

Viscoride Wheelchair Cushion

The ViscoRide Wheelchair Cushion is a foam seat cushion designed for use by individuals who use wheelchairs. Made from Antimicrobial enhanced TEMPUR material, this lightweight cushion is designed to provide optimal pressure management, while maintaining proper positioning. The cover is made from 100 % polyurethane multi-stretch fabric that is liquid safe, removable, and machine washable. DIMENSIONS: 18 x 16 inches, 18 x 18 inches, 16 x 16 inches, or 20 x 18 inches. WEIGHT: 5.3 pounds. CAPACITY:

Water Wheelchair Cushion (Model Msc263055)

The Water Wheelchair Cushion, model MSC263055, is a water flotation seat cushion designed for use by individuals with mobility disabilities, lower extremity disabilities, or spinal cord injury. This latex-free cushion fits most standard wheelchairs and provides pressure relief for all-day sitting by distributing the user's body weight evenly. The cushion is washable. DIMENSIONS (LxW): 18 x 16.5 inches.

Waterproof Hospital Fleece Pads

The Waterproof Hospital Fleece Bed Pads are decubitus pads designed for use by individuals at risk for pressure sores/ulcers. These pads are made from 100 percent machine-washable lambswool knitted into a backing material to create a dense fleece. A breathable waterproof layer is bonded to the back. This fleece creates a microclimate which assists in regulating body temperature and humidity. Hospital Fleece is hypoallergenic and non-flammable. The wool is treated with an antibacterial and an ant

Waterproof Seat Protector

This waterproof seat protector is meant for use by individuals who have incontinence or who wet and/or soil themselves. It is meant to prevent damage to wheelchairs, couches, chairs, etc. It absorbs up to one cup of moisture and helps protect sensitive skin from contact with fluids.

Web Seat Frame

The Web Seat Frame is a detachable seat frame with elastic webbing that can be substituted for sling upholstery in a 16 or 18 inch wide wheelchair. The Frame is easily removed for folding the chair. It supports a variety of polyurethane integral skin foam cushions, which clip onto the frame and remove for cleaning.

Web-Belt Loop For Relief Of Pressure On Buttocks.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Fabric loop to help a quadriplegic with some use of biceps or shoulder adductors relieve sitting pressure while in wheelchair in order to prevent decubitus ulcers. McCormick Loop made of seat belt material, a D ring and Velcro closure. It is looped around the wheelchair arm and the patient puts an arm through it; he can then lean to one side, relieving pressure on the opposite side, and pull upright using the strap. Includes drawing and photograph. COM

Wedge Ease

The Wedge Ease is wedge foam seat cushion that slopes from the back of the seat to the front to tilt the user's pelvis slightly forward to restore the spine's natural lumber curve. It has a removable insert in that when removed, forms a center rear cutout designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. It is constructed of poly foam and memory foam with a cover that is removable and washable. It has a non-slip bottom. DIM

Wedge Foam Cushion (Models 6520, 6520B, & 6520L)

The Wedge Foam Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion gently rotates the hips back to prevent forward sliding. The Staph-Chek cover wipes clean. DIMENSIONS: Models 6520 and 6520B are 18 inches wide and model 6520L is 20 inches wide. The cushion tapers from 4 inches high in the front to 2 inches high in the back. COLOR: Model 6520 and 6520L have two-color pink and blue covers and model 6520B is blue.

Wedge Pommel Cushion (Models 6522P & 6522L)

The Wedge Pommel Cushion is a wedge foam seat cushion designed for use in wheelchairs. This cushion features a pommel, promotes hip abduction and proper knee alignment, and the wedge design prevents forward sliding. The convex bottom provides a stable foundation and eliminates seat hammocking. The cushion is covered in water-repellent non-slip vinyl. DIMENSIONS: Model 6522P is 18 inches wide and model 6522L is 20 inchesw wide.

Wedged Cushions (Models N2001 & N2002)

The Wedged Cushions are wedge foam seat cushions designed for use in wheelchairs. These cushions taper toward the back to prevent the user from sliding forward in the chair. The cushions have a removable zippered cover. DIMENSIONS: Model N2001 is 3 x 16 x 18 x 1.5 inches and model N2002 is 4 x 16 x 18 x 1.5 inches. COLOR: The cover is navy.

Weplay Modern Ball Chair

With the Modern Ball Chair, children can exercise and focus while doing homework, reading or playing. The chair promotes the development of proper posture and increases a sense of balance while also providing sensory input to those who need it. It has a round and soft exterior and the back rest provides comfort, and helps promote blood flow to the legs. Locking casters come standard on the wheels so they are safe and can stay in one place. This chair has been an effective calming seat for childr

Wheelchair Adaptive Hardware

Wheelchair Adaptive Hardware is seating hardware designed for attaching seating components to standard wheelcahir frames. Available hardware includes drop hooks, adjustable angle hooks, horseshoe clips, U-brackets, seat blocks and locks, strap hinges, adjustable headrest support brackets, and lateral trunk support brackets and pads. WARRANTY: The manufacturer warrants these products against defects in materials and workmanship for 90 days from the date of purchase.

Wheelchair Back Support

The Wheelchair Back Support is a lumbar back support cushion designed to provide firm back support for wheelchair users. Covered in stain-resistant velour, the half-moon-shaped support is formed of quick-recovery foam and attaches to the wheelchair using loop handles. DIMENSIONS (LxWxD): 16 x 8 x 3 inches.

Wheelchair Cloud Cushion

The Wheelchair Cloud Cushion is an eggcrate foam cushion designed for use in wheelchairs. The convoluted foam cushion relieves pressure on pressure points and includes a fleece cover. DIMENSIONS (WxDxH): 18 x 16 x 4 inches.

Wheelchair Computer Tray

DO-IT-YOURSELF ENTRY --- PURPOSE: To create a computer work table for a wheelchair. The table surface is made of plywood and positions a laptop computer directly in front of the user. The table is angle-adjustable and pivots out of the way or can be removed for transfers or when not in use. The table is supported by a pole and support made of threaded pipe. MATERIALS: Plywood and threaded pipe. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF:

Wheelchair Convex Back Support

The Wheelchair Convex Back Support is a curved back insert designed for use in wheelchairs with sling upholstery. This support compansates for the tendency of sling upholstery to gap and improves support and pressure distribution by molding to the user's back. Made of high-density foam with softer foam on the front surface, this support featires a built-in lumbar roll and ties to the wheelchair back uprights. DIMENSIONS: 16 x 16 inches.

Wheelchair Covering

The Wheelchair Coverings are decubitus pad and seat covers, armrest and legrest pads for wheelchairs designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who spend most of their time in wheelchairs. Made from Hitemp, urine resistant medical sheepskin, these pads help reduce the risk of pressure sores and ulcers and body aches. The pads are made separately to fit the seat, back and arms of the wheelchair. They are washable and are available

Wheelchair Cushion (Model F76654-0003)

The Wheelchair Cushion, model F76654-0003, is a foam seat cushion made of polyurethane foam. The cushion has a removable cover made of PVC coated white knit nylon iwth a cotton binding. The material is sanitized to guard against mildew and fungus growth. The cover is machine washable and may be tumble dried. DIMENSIONS: 18 x 16 x 3 inches.

Wheelchair Cushion (Models 7601, 7602, 7603, 8020, 8021, & 8025)

The Wheelchair Cushion, models 7601, 7602, 7603, 8020, 8021, 8025, is a foam seat cushion with a high density foam core designed for soft even support. All covers are removable for easy care. OPTIONS: customs sizes available; model 8025 is a 16 x 18 x 2 inch convoluted polyfoam cushion with plaid cover. COVERS: beige naugahyde provides a waterproof, flame retardent surface; plaid or blue cotton/poly blend also available. DIMENSIONS: 16 x 18 inches, 2, 3 or 4 inch thicknesses.

Wheelchair Cushion - Foam

The Wheelchair Cushion - Foam is a foam seat cushion designed for use by individuals who use wheelchairs. The polyurethane foam cushion is available with a choice of a plaid fabric cover or a waterproof rip-stop nylon cover. DIMENSIONS: 16 x 16 inches or 16 x 18 inches, both in a choice of 2, 3, or 4 inches thick. COLOR: The warerproof cover is navy.

Wheelchair Cushion - Foam Wedge

The Wheelchair Cushion-Foam Wedge is a wedge foam seat cushion designed for use in wheelchairs. This urethane foam cushion positions the user toward back of the wheelchair without restraints and inhibits sliding or slumping. The cushion is available with a choice of a plaid fabric or a rip-stop nylon cover with or without ties. DIMENSION: 16 x 16 inches or 16 x 18 inches, both with a choice of 3- or 4-inch thicknesses tapering to 1 inch thick.

Wheelchair Cushion - Latex

The Wheelchair Cushion - Latex is a foam seat cushion designed for use by individuals who use wheelchairs. The latex foam cushion features symmetrically-spaced holes to provide cool, comfortable seating. A removable, washable plaid fabric cover is standard. DIMENSIONS: 16 x 18 x 2, 3, or 4 inches.

Wheelchair Cushion With Center Board

Foam seat cushion with a masonite insert to eliminate the sage from conventional wheelchair upholstery. Zipperd cover , poly/cotton or 10 ounce canvas. Non-skid bottom on cover. Made to exact dimensions.

Wheelchair Cushions

Variety of wheelchair foam seat cushions. Cloth, nylon or Naugahyde covered. DIMENSIONS: 16 x 16 inches or 16 x 18 inches.

Wheelchair Leveling Pad (Models 757010 & 757015)

The Wheelchair Leveling Pad is a solid seat insert designed for use in wheelchairs. This solid, closed-cell foam pad makes wheelchair sling seats flat and level with the seat frame. This pad can be used as a foundation for other cushions. Model 757010 does not have a cover and model 757015 includes a vinyl cover. DIMENSIONS: Both models are 16 x 18 inches.

Wheelchair Lumbar Support(Models 703065 & 703066)

The Wheelchair Lumbar Support is a lumbar support designed for use in wheelchairs. The foam core is covered in easy-clean vinyl. The attached straps hold the support securely in place. Model 703065 is a half-round and model 703066 is a full-round. SIZES: One size fits 16- and 18-inch chairs. DIMENSIONS: The half-round is 2.5 inches in diameter and the full-round is 5 inches in diameter.

Wheelchair Pad (Model 16833)

The Wheelchair Pad, model 16833, is a decubitus pad designed for use by wheelchair users at risk for pressure sores. The pad is made from cotton/ polyester fabric on one side and a water-repellent fabric for incontinent situations on the other. Ties secure the pad to the wheelchair. SIZE: One size fits most wheelchairs. WARRANTY: Included.

Wheelchair Pad With Horn And Nylex Cover (Models Cbc16X16 & Msc019004)

The Wheelchair Pad With Horn and Nylex Cover is a foam wheelchair cushion designed for use by individuals with mobility disabilities. This solid foam cushion has a horn and is designed to help prevent the user from sliding forward or out of the wheelchair. The Nylex cover is fluid-resistant and antimicrobial. Model MSC019004 is latex free. DIMENSIONS (HxLxW): 3 x 18 x 16 inches (model CBC16X16) or 3 x 18 x 18 inches (model MSC019004).

Wheelchair Positioner Cushion

The Wheelchair Positioner Cushion is a torso support designed for use by individuals who use wheelchairs. This M-shaped cushion rests over th lap of the users and the notches fit around the wheelchair frame to keep the cushion in position. Designed for use in wheelchairs with standard arms, this cushion promotes upper body alignment, prevents forward leaning, and serves as an elbow rest and work surface. A removable, wipe-clean, water-repellant vinyl cover is included. DIMENSIONS: Available in a

Wheelchair Safety Belt

The Wheelchair Safety Belt is a wheelchair seatbelt designed to prevent falls from wheelchairs. The adjustable, heavy-duty Velcro belt crosses the lap and attaches to the wheelchair axle with reinforced grommeted nylon straps. SIZES: One size fits most.

Wheelchair Seat Cover (Model 110)

The Wheelchair Seat Cover, model 110, is a decubitus pad designed for use by people with mobility disabilities, spinal cord injury and others who use wheelchairs and who are at risk for pressure sores or ulcers.This tanned natural sheepskin is machine washable and dryable, and it has elastic straps and slides on the corners to attach it to the seat and back of a standard sized wheelchair. COLOR: Natural.

Wheelchair Seat Pad (Model 111)

The Wheelchair Seat Pad, model 111, is a decubitus pad designed for use by people with mobility disabilities, spinal cord injury and others who use wheelchairs and who are at risk for pressure sores or ulcers.This tanned natural sheepskin is machine washable and dryable, and it has elastic straps and slides on the corners to attach it to the seat of a standard sized wheelchair. DIMENSIONS (LxW): 18 x 16 inches. COLOR: Natural.

Wheelchair Seatbelt (Models 6880 & 6886)

The Wheelchair Seatbelt is a belt restraint designed to keep individuals in wheelchairs from falling forward out of the chair. It can be permanently attached to the upholstery screws and has a Velcro closure. DIMENSIONS: Both models are 2 inches wide; Small (6880) is 32 to 42 inches long, Large (6886) is 42 to 52 inches long.

Wheelchair Side Support

The Wheelchair Side Support is a lateral trunk support designed for use with individuals with balance disabilitieis. Made of closed-cell foam, the support can be modified with an electric knife and can be used on the right or left side individually or on both sides. OPTIONS: Short or long torso support inserts. DIMENSIONS: The optional short torso support is 6 inches long and the optional long torso support is 9 inches long.

Wheelchair Side Support (Models Ali1240 & Ali1241)

Wheelchair Side Support provides lateral torso support for wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. These vinyl-covered foam bolsters reduce a standard 18-inch wide seat to 16 inches wide, thereby improving lateral support and reducing side-to-side rocking that can cause skin damage. Bolsters are available for high-back wheelchairs (model ALI1241) or for standard and desk-length arm wheelchairs (model ALI1240). DIMENSIONS (HxLxW): 1 x 15 x

Wheelchair Side Wings (Models 706320 & 706322)

The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs and lean bilaterally. These rigid-frame wings are padded with foam and covered in wipe-clean vinyl and attach to most wheelchairs, providing support at the shoulder level. Model 706320 is the Standard Support model. Model 706322 is the X-tra Support model which features integral armrest pads which fasten the bottom of the wings to the wheelchair armrest frame to provide additional support for larger

Wheelchair Slipcover (Model 6393)

The Wheelchair Slipcover, model 6393, is a seat cover for a wheelchair designed to enhance comfort and reduce pressure sores. This one-piece plush synthetic fur pad covers the wheelchair seat and back. DIMENSIONS: This pad fits most 16-, 18-, and 20-inch wheelchairs.

Wheelchair Slippers (Models 6480S-M & 6480M-L

Wheelchair Slippers are foot protectors designed for use by individuals who use wheelchairs. Each of these soft plush, machine-washable slippers feature a strap on the bottom that slides over the wheelchair footplate, securing the slipper to the footplate, protecting the foot and providing a surface for the wearer to push against to stop forward sliding. SIZES: Model 6480S-M fits women's shoe sizes 5 to 10 and men's shoe sizes 5 to 8. Model 6480M-L fits women's shoe sizes 10 and up and men's sh

Wheelchair Snack Tray (Model 70621-0000)

The Wheelchair Snack Tray, model 70621-0000, is a lapboard designed to clamp to wheelchair tubing to hold snacks and beverages. The tray sticks to a platform by Velcro pads to facilitate removal for cleaning. The try is made of polystyrene; metal parts are epoxy coated. DIMENSIONS: 6.5 x 9.75 inches.

Wheelchair Table Attachment

This Wheelchair Table Attachment is a wheelchair lapboard with removeable desk arms. The table attaches to the wheelchair frame and front of the armrests with clamps. The tray is made of wood with a formica top and aluminum tubing. DIMENSIONS: 8 w x 24 l Specify width between arm rests when ordering.

Wheelchair Tray

The Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. This plastic tray helps provide support for proper positioning while creating work and eating space. The tray features a torso cutout and raised edges prevent items from rolling. Velcro fasteners securely fasten the tray to the wheelchair. DIMENSIONS: 20 x 24 inches. WEIGHT: 1.1 pounds.

Wheelchair Tray

The Wheelchair Tray is a lapboard designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray is made of plywood with two sides that rest on the seatpan of the wheelchair. A vinyl seal is fixed to the inside edge of the tray to protect the user from spills. PROTOTYPE DEVELOPMENT: Designed by John Duffus as a more comfortable and practical eating surface for wheelchair users at a standard height tabletop that is not high eno

Wheelchair Tray

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to carry meals and items and to have a drink holder. This tray is customized to fit the individual wheelchair. Made of wood and varnished, the tray has a wooden rim on all sides to keep items from rolling or sliding off. Wooden or metal rods fastened to the bottom of the tray slide into the hollow horizontal tubes under each armrest. To allow the rods to be inserted, the front retaining screw on each armrest must be

Wheelchair Tray (Model 5061) & Wheelchair Tray Child Size (Model 2467)

Wheelchair tray with rim fits all size wheelchairs with full length or desk arms. Sides are tapered to permit chair propulsion with tray in position. Smooth plastic top. 24 by 19 inches with 15 by 6 inch cutout; child size 20 by 19 inches with 12 by 3 1/2 inch cutout.

Wheelchair Tray (Model 6025)

Formica lapboard, Velcro fasteners. Adult size, 24 by 20 inches by 1 inch.

Wheelchair Tray (Model 91)

The Wheelchair Tray, Model 91, is a solid lapboard that fits on the armrests of a wheelchair. The tray has a stain-resistant liminated finish ans Velcro attachment straps.

Wheelchair Tray (Model H70601-0015)

The Wheelchair Tray, model H70601-0015, is a formica lapboard designed to be attached to either side of a wheelchair with Velcro fastening straps. This rigid tray has a non-glare surface, a cutout, and a channel around its perimeter to catch spills. The edges are protected by smooth plastic molding. DIMENSIONS: Tray is 24 x 19 inches. WEIGHT: Shipping weight is 8.3 pounds.

Wheelchair Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair; can be used for activities or for arm support. Materials, diagrams and directions for making three types of wooden wheelchair laptrays. A standard tray with Velcro straps for attachment to wheelchair arms; a variation which folds in half; and a lowered tray useful for activities like cooking. SKILLS REQUIRED: Woodworking. AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Acce

Wheelchair Trays

The Wheelchair Trays are lap trays designed for use by children and adults who use wheelchairs. Made of shatterproof clear polycarbonate, the trays include adjustable mounting hardware. OPTIONS: Engraving of names and addresses, custom cutouts, slantboards, and more. DIMENSIONS: All models are made of 3/8-inch thick polycarbonate. Standard models are available for 10- to 12-inch wheelchairs, 13- to 14-inch chairs, 15- to 17-inch chairs, and 18- to 20-inch chairs. Custom dimensions are also avail

Wheelchair Trays (Models 4040, 4042, 4044, 4080, & 4090)

The Wheelchair Tray, models 4040, 4042, 4044, 4080, 4090, is a lapboard designed to be used by individuals in wheelchairs who need a hard, flat surface for eating, writing, etc. The trays have raised T-molding on the outside edges for extra security and have a half-moon cutout facing the individual. The universal design fits all standard wheelchairs and attaches with Velcro fasteners. SIZES: Adult 20 x 24 x 1/2 1 inch. Child 20 x 18 x 1/2 inch.

Wheelchair Trays And Modifications

Lapboards. Available in 1/2 inch 9 ply birch plywood, or 3/8 or 1/4 inch Tuffak (polycarbonate material), with regular or heavy duty cottonwood ribs. Range of widths, 20 7/8 to 25 3/4 inches; depths 17 7/ 8 to 25 3/4 inches; Cam adjustment range 13 3/4 - 18 1/4 inches to 18 1/ 4 - 23 1/4 inches. Small fits STC 803/900 Models and Tiny Tot and Growing wheelchairs; Medium fits STC 804/806/900 Models and Growing, Narrow Adult and Adult wheelchairs; Large fits STC 804/806/900 Models and Adult wheelch

Wheelchair Waist Belt With Buckle

The Wheelchair Waist Belt With Buckle, model MDT825120, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. Made of washable nylon, this latex-free belt circles the waist, passes through a slide buckle, and ties in back. The slide buckle allows for individual fit and prevents overtightening. SIZES: One size fits all.

Wheelchair Wedge (Series 7540)

The Wheelchair Wedge is a foam or gel and foam wheelchair seat cushion designed to prevent user sliding in the chair. Offered in foam or foam and gel with a choice of a soft or firm foundation, the Wedge can be ordered with a polyester cover, an incontinence-proof vinyl cover, or with the vinal cover and a launderable fabric cover. The vinyl-covered wedge has a top and bottom of different colors as a reminder to reposition periodically. DIMENSIONS: Available in 16 x 18 x 6 x 3 inches or 16 x 18

Wheelchair Wedge Cushion (Model H76670)

The Wheelchair Wedge Cushion, model H76670, is designed for placement in a wheelchair with the high edge forward to prevent the user from sliding off. In a reversed position, the high edge in the back assists rising. Ties at all four corners secure the cushion to the wheelchair frame. The polyurethane foam cushion has a denim cover with a zipper for removal and laundering. DIMENSIONS: 16.5 x 16.5 x 4.5 inches.

Wheelchair Wedge.

Foam wedge. Approximately 6 inches long, 16 inches wide and 2 inches high. May be used in pairs, high sides to front and back, to prevent person from sliding out of chair.

Wheelchair Wing Backs (Model 6321)

Wheelchair Wing Backs, model 6321, are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs. Constructed of plywood and padded in foam and covered in wipe-clean vinyl, these wings attach to the screws on the wheelchair back to provide support without taking up seating space. The angle may be adjusted to accommodate user needs. DIMENSIONS (WxL): 8 x 10 inches.

Wheelchair Y Safety Belt (Model 6038)

The Wheelchair Y Safety Belt is a belt restraint or wheelchair seatbelt. The "Y" shape is designed to prevent slumping and sliding of individuals in wheelchairs. The belt is completely adjustable and made of nylon webbing. SIZES: One size fits all.

Wheelnest Seating System

The WheelNest Seating System is a portable system for prolonged, balanced seating in wheelchairs, cars, office or other chairs that has a molded seat, solid seat and solid back inserts, and gel flotation seat cushion. WheelNest provides a balanced underseating as well as lumbar back support; helps maintain proper lordosis (curvature of the spine), correct hip position and proper spine alignment; and helps prevent decubitus ulcers. BACK SUPPORT: The back support is made of padded, contoured layer

Whit Kit (Model A0001)

The Whit Kit, model A0001, is a large selection of head supports allowing the clinician to evaluate what head support system works best for the client. It includes head support pads and hardware which let the clinician create custom solutions by mixing and matching components. They come packed in a hard shell plastic case for transporting. Also included is the Quik Mount hardware bracket (see separate entry) for fast and simple assembly and adjustment on any wheelchair. Whit Kit comes complete w

Wing Back Support

The Wing Back Support is a back support cushion designed for use by individuals with back pain, weakness, or injury. This support can be used in standard chairs, office chairs, or on car seats and provides lateral support for correct posture as well as lower back support. This cushion is available in polyurethane foam, six-pound VitalFoam Memory foam, or Memory Lite foam, and all models include an adjustable strap to secure the cushion to a car seat. DIMENSIONS: The polyurethane foam model is 1

Winnipeg Modular Seating System

Modular seating system. ABS plastic seat and back modules can be attached together to form a simple wheelchair insert or fitted to special interface hardware. Two back styles: standard with contouring at waist, and MD back with preformed lumbar support cushion. Two seat styles: pommel seat and transfer seat without pommel. Sizes range from 10 to 15 inches seat width by 12 to 19 inches seat depth by 19 to 23 inches back height. Additional components include headrest, lateral trunk support, tray,

Wombat

The Wombat is a child's adjustable positioning chair designed for use by children with mobility or neurological disabilities. This four-caster chair has an adjustable back and seat, and comes with a variety of support devices. The back adjusts manually in depth, height, and angle. The angle of the seating surface can be changed to accommodate multiple activities. In the classroom the chair can be adjusted for use by different children. OPTIONS: Available accessories include head supports, lift h

Wondergel Doublegel Seat Cushion (Model Wg-Dg-001)

The WonderGel DoubleGel Seat Cushion, model WG-DG-001, is a gel seat cushion designed for use by individuals who sit for long periods , including individuals with burns, pressure sores, lower extremity or mobility disabilities, or spinal cord injury. The unit is made of supportive and pressure-relieving WonderGel, which consists of hollow columns of a gel called Gelastic, a solid rubber-like material. The columns form a pattern similar to a honeycomb, which redistributes and equalizes pressure

Wondergel Extreme Seat Cushion (Model Wg-Ex-001)

The WonderGel Extreme Seat Cushion, model WG-EX-001, is a gel seat cushion designed for use by individuals who sit for long periods, including individuals with burns, pressure sores, lower extremity or mobility disabilities, or spinal cord injury. The unit is made of supportive and pressure relieving WonderGel, which consists of hollow columns of a gel called Gelastic, a solid rubber-like material. The columns form a pattern similar to a honeycomb, which redistributes and equalizes pressure bet

Wondergel Original Seat Cushion (Model Wg-Og-001)

The WonderGel Original Seat Cushion, model WG-OG-001, is a gel seat cushion designed for use by individuals who sit for long periods, including individuals with burns, pressure sores, lower extremity or mobility disabilities, or spinal cord injury. The unit is made of supportive and pressure-relieving WonderGel, which consists of hollow columns of a gel called Gelastic, a solid rubber-like material. The columns form a pattern similar to a honeycomb, which redistributes and equalizes pressure bet

Wood Tray With Vinyl Cover

The Wood Tray with Vinyl Cover is a wheelchair lap trays designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The tray is made of birch wood with a wooden rim, and it has foam padding with a vinyl cover. The unit comes with mounting hardware, and it is available as a stationary or flip-up tray for the right or left side of the wheelchair. DIMENSIONS: 22 x 13 inches; wood is 0.38 inches thick; foam is 1 inch thick.

Woodline Light Trays (Series 31100)

The Woodline Light Trays are lap trays designed for use with wheelchairs. These seven-ply birch trays have limitied moisture resistance and can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a three-piece wood rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide), extra wid

Woodline Series

The Woodline Series are lapboards designed for use by people who use wheelchairs. The trays are constructed of 7-ply birch plywood with a lacquer finish. Models include the tray only, tray with 3-piece wood rim, tray with straps, and tray with straps and rim. The juvenile tray has an oblong design, while the other models are square. SIZE: All models are available in child, juvenile, adult, and X-wide sizes. DIMENSIONS (W x D): The adult tray is 23.5 x 22 inches, with a 15 x 9 inches torso cutout

Workmod Back Support (Model Nc73585)

The WorkMod Back Support, model NC73585, provides firm lower back support and encourages correct sitting position and posture, eliminating discomfort and fatigue. The cushion can be used on any type of chair and is designed to stay in place during use.

Yogaback Posture Cushion For Driving

The YogaBack Posture Cushion for Driving is a back support cushion designed for use by drivers with lower back pain. This polyethylene foam cushion features sacral and thoracic pads that attach with Velcro to the inside back surface of the cushion's fabric cover. The pads are infinitely height adjustable. The cushion has a slim profile so the user will not be pressed forward in the car seat. The cushion's depth is adjustable with a choice of two different pad thicknesses. The cushion comes with

Yogibo Yogi Support

The Yogi Support is a specialty bean-bag pillow filled with uniformly sized polystyrene beads that work hand-in-hand with the lycra-cotton blend cover. This combination of bead and fabric allows the Yogi Support to conform to the contours of a child's body. Unlike traditional bean bags where the beads move around with the slightest movement, the Yogi Support stays in the same shape it's placed in.

Zero Elevation Foam Cushion (Models Mscze1616, Mscze1816, & Mscze2016)

The Zero Elevation Foam Cushion is a foam wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. Designed not to add height to the wheelchair seat, this cushion has a soft top layer and a firm bottom layer, with a curved front edge to minimize contact with the user's thighs, a non-skid bottom with a strap, and a ShearX all-way stretch cover to reduce skin shear. The cover is anti-microbial and fluid-proof. DIMENSIONS (LxW): 16 x 16 inches (model MSCZ

Zero Elevation Gel Cushion (Models Msczeg1616, Msczeg1816, & Msczeg2016)

The Zero Elevation Gel Cushion is a gel flotation wheelchair cushion designed for use by individuals with mobility disabilities or spinal cord injury. Designed not to add height to the wheelchair seat, this gel cushion has a soft top layer and a firm bottom layer, with a curved front edge to minimize contact with user's thighs, a non-skid bottom with a strap, and a ShearX all-way stretch cover to reduce skin shear. The cover is anti-microbial and fluid-proof. DIMENSIONS (LxW): 16 x 16 inches (m

Zipkrooz Assisted

ZipKrooz ™ Assisted is an adapted playground zip line designed to stimulate proprioceptive and vestibular senses for children ages 2 to 12 year of age with limited upper and/or lower body strength. The rotationally molded bucket seat with a lock-in-place harness provides stability and security. The ZipKrooz ™ Assisted offers a 2-way ride along an easy glide trolley. There is a built-in elevation that can be installed on level ground with no embankments needed. OPTIONS: Additional Bay. SIZES

Zippie

The Zippie is a child's lightweight manual wheelchair designed for use by children with mobility disabilities. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional.A growth kit is included to expand the fame to meet the user's needs. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths ran

Zippie Head And Neck Telescoping Support System

Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back.

Zippie Hip Pads & Full Side Pads

Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only.

Zippie Iris

Zippie IRIS is designed for children 4 to 16 years of age who require the benefit of tilt and a caregiver’s assistance with mobility. The Zippie IRIS rotation-in-space wheelchair is a lightweight tilt-in space wheelchair. It offers 55 degrees of Rotation-in-Space Technology. The IRIS is able to grow as the child grows. Adjust the depth and center-of-gravity without replacing any parts. Additional special features include a 40 degree or 55 degree tilt range option to accommodate various posi

Zippie Trunk Support Pad And Bracket

Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black on

Zippie Ts

The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel

Zoid Performance Cushion

The Zoid Performance Cushion is an air flotation cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use sport wheelchairs. This self-inflating cushion features impact and vibration reducing technology. It tapers one inch from front to back for a tigher fit. The self-inflating technology lets the user immerse into the cushion to lower center of gravity and improve agility. The cushion has extra-stiff, beveled laterals to p

Zoomi

The standard Zoomi is a youth positioning chair designed for use for children with mobility and neurological disabilities. Designed to promote good feet-on-the-floor posture, it can be used in the classroom and home. Both the seat and footrest can be easily adjusted to the appropriate height and depth, allowing the chair to accommodate the user's needs as they grow. Standard Zoomi chair comes complete with flat seat, backrest and pelvic strap. OPTIONS: Mobile skis, slotted footboard, transfer st

 
Processing...


Driving Walking/Biking Public Transit  Get Directions