Bathrooms

Results: 556

1/2-Inch & 3/4-Inch Wall Valves - Lever Handle (Models 818/013 & 818/014)

The 1/2-Inch and 3/4-Inch Wall Valves - Lever Handle are single-lever shower controls designed for use by individuals with fine motor or grasping disabilities. This wall-mounted, cast- brass valve has a single-lever handle to control on/off and volume functions in a shower system. The valve is available with either 1/2-inch (model 818/013) or 3/4-inch (model 818/014) NPT National Pipe Thread) standard threading. COLOR: Brushed nickel, diamond, platinum nickel, or polished chrome finish.

120 Angle Grab Bar For Wall

Stainless steel straight grab bar, with extension support. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 12 inches long, with 12 inch perpendicular extension.

36 Inch Ada Transfer Shower ( Model Xst 4036 Bf. 5)

The 36 inch Transfer Shower, model XST 4036 BF. 5, is a one-piece gel-coat transfer shower designed for individuals with lower extremity disabilities. A 90-degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four-inch tile finish, a textured slip resistant floor, a leg ledge and soap/shampoo ledges. The half-in

36 Inch Ada Transfer Shower (Model Xst 3699 Bf .5)

The 36 inch Transfer Shower, model is a one piece gel-coat shower with built-in grab bar and seat, model XST 3699 BF .5, designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four- inch tile finish, a textured slip resistant floor, and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. The included handshowerkit has nyl

36 Inch Ada Transfer Shower (Model Xst 3938 Bf. 5)

The 36 inch Transfer Shower, model XST 3938 BF. 5, is a one-piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. A 90- degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip-resis

36 Inch Ada Transfer Shower (Xst 3838 Bf 1.25)

The 36 inch Transfer Shower, model XST 3838 BF 1.25, is a one- piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, leg ledges and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. Th

4-Inch Tile Grip Portable Grab Bar

The 4-Inch Tile Grip Portable Grab Bar is a wall grab bar designed for use by individuals with balance and mobility disabilities. This grab bar features a telescoping handle that extends to adapt to most tile configurations and secures with large suction cups to most clean, smooth, flat surfaces without tools. When the unit is in place, pressing the top and bottom levers down locks the unit in place. Lifting the levers up releases the bar from the wall, allowing it to be removed as needed. DIMEN

60 Inch Curbless Shower (Sxt6333 Bf .75)

The 60 inch Curbless Transfer Shower, model SXT6333 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a two-inch apron and a four- inch tile finish with diamond accents, a textured slip resistant floor, seat-height storage ledges, and soap/shampoo ledges. The half- inch tri-cell wall constructi

60 Inch Curbless Shower (Sxt6337 Bf1.25)

The 60 inch Curbless Transfer Shower, model SXT6337 BF1.25, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model has a 1.25-inch steel reinforced threshold, a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wall constructio

60 Inch Curbless Shower (Sxt6437 Bf .75)

The 60 inch Curbless Transfer Shower, model SXT6437 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a three-quarter-inch steel reinforced threshold, a six- inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wal

800 Series 120 Degree Angle Wall Grab Bar For Toilet (Model 004)

The 800 Series 120 Degree Angle Wall Grab Bar for Toilet ##004 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Both segments of the bar are 12 inches each; mountings are 21 inches apart. Tubing comes in 1, 1.25, or 1.5 inch diameters. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 3 pounds.

800 Series 90 Degree Angle Wall Grab Bar For Toilet (Models 005 & 006)

The 800 Series 90-Degree Angle Wall Grab Bar for Toilet ##005/006 is a stainless steel wall mounted grab bar. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. The bar comes in right (##006) or left (##005) handed configurations. DIMENSIONS: Bar extends vertically 32 inches and horizontally 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polish

800 Series 97 Degree Angle Wall Grab Bar For Toilet (Models 040 & 041)

The 800 Series 97 Degree Angle Wall Grab Bar for Toilet ##040/041 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available with right (##041) or left (##040) handed configurations. DIMENSIONS: Bar extends 32 inches vertically, and 9 inches horizontally with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Fini

800 Series Corner Wall Grab Bar For Toilet (Model 059)

The 800 Series Corner Wall Grab Bar for Toilet ##059 is a stainless steel wall mounted safety bar. The bar consists of two perpendicular sections that extend from the walls 6 inches. This corner bar attaches in three places, two on the side wall and one on the back wall. This grab bar is available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS: 36 x 52 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety G

800 Series Corner Wall Grab Bar For Toilet (Models 119 & 120)

The 800 Series Corner Wall Grab Bar for Toilet ##119/120 is a stainless steel grab bar configured for end or corner stalls. The grab bar consists of a U-shaped bar that goes on the open side of the toilet, and a perpendicular bar that mounts on the wall side of the toilet 5 inches from the opposing wall. These grab bars are avaialble with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Configurations for right (##120) or left (##119) handed mounting. DIMENSIO

800 Series Grab Bar For Bathtub (Model 021)

The 800 Series Grab Bar for Bathtub ##021 is a stainless steel wall to floor grab bar designed for the wall end of a bathtub. The support consists of a U-shaped horizontal bar that attaches to the wall and 2 perpendicular bars that mount in the floor on either side of the tub. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 10 pounds. FINI

800 Series Grab Bar For Bathtub (Model 024)

The 800 Series Grab Bar for Bathtub ##024 is a stainless steel wall mounted grab bar designed for use at the wall end of a bathtub. The support consists of a U-shaped bar with support extensions at either end. The bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Gr

800 Series Grab Bar For Bathtub (Models 023 & 022)

The 800 Series Grab Bar for Bathtub ##023/022 is a stainless steel wall mounted grab bar for corner tub applications. The bar consists of an L-shaped horizontal bar that attaches to both walls, and a vertical bar that mounts in the floor. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##022) or left (##023) handed configurations. DIMENSIONS (LxWxH): 40 x 8.5 x 32 inches with 1, 1.25, or 1.5 inch diameter

800 Series Grab Bar For Bathtub (Models 026 & 027)

The 800 Series Grab Bar for Bathtub, ##026/027, is a stainless steel corner wall grab bar designed to be wall mounted at the corner end of the tub. The bar consists of one L-shaped bar and one support extension. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##026) or left (##027) handed configurations. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 4 to 5 pound

800 Series Grab Bar For Bathtub (Models 031 & 030)

The 800 Series Grab Bar for Bathtub ##030/031 is a stainless steel wall mounted grab bar designed for corner tub applications. The bar consists of an L-shaped horizontal bar with a perpendicular upright at one end. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available with right (##030) or left (##031) handed configurations. DIMENSIONS (LxWxH): 36 x 20 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 7 to 8 poun

800 Series Grab Bar For Shower (Model 007)

The 800 Series Grab Bar for Shower ##007 is a stainless steel wall mounted grab bar designed for shower applications. The support consists of a U-shaped bar that attaches to the wall in 4 places. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 25 x 1.5 x 34 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 9 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Pol

800 Series Grab Bar For Shower (Models 032 & 033)

The 800 Series Grab Bar for Shower ##032/033 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped bar that attaches to the wall at two points on the vertical bar and one point on the horizontal bar. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##033) or left (##032) handed configurations. DIMENSIONS (LxWxH): 24 x 1.5 x 34 inches with 1, 1.25, or 1.5

800 Series Grab Bar For Shower (Models 034 & 035)

The 800 Series Grab Bar for Shower ##034/035 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped horizontal bar with a perpendicular upright at one end. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available in right (##035) or left (##034) handed configurations. DIMENSIONS (LxWxH): 26 x 26 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINIS

800 Series Grab Bar For Toilet (Model 039)

The 800 Series Grab Bar for Toilet ##039 is a stainless steel floor mounted safety frame for a toilet. The frame consists of two parallel rails that form an upside down U shape and mount in the floor at 4 places. A perpendicular rail runs behind the toilet and connects the two rails. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 22 x 22 x 28 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Stan

800 Series Grab Bar For Toilet (Model 054)

The 800 Series Grab Bar for Toilet ##054 is a stainless steel wall to floor grab bar for unilateral support when accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to the wall and to the floor with a 3-inch extension at the floor mounting. This bar is available with a concealed or exposed mounting. DIMENSIONS (LxH): 33 x 30 inches with either 1.25 or 1.5 inch diameter tubing (1-inch tubing not available with this bar). WEIGHT: 6 to 7 pounds. FINISH: Stan

800 Series Grab Bar For Toilet (Models 001 & 002)

The 800 Series Grab Bar for Toilet ##001/002 is a stainless steel, wall mounted straight bar designed for horizontal attachment next to a toilet. This support attaches to the wall in two places for lengths up to 54 inches (##001), and has a center support mount for lengths over 54 inches (##002). This bar is available with concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Model 001 is available in the following lengths: 12, 16, 18, 24, 30, 32, 36, 42,

800 Series Grab Bar For Toilet (Models 010 & 011)

The 800 Series Grab Bar for Toilet ##010/011 is a stainless steel wall to floor grab bar for unilateral support while accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to both the wall and the floor, and an outrigger, or extension floor mount. These bars are available with a concealed or exposed mounting, right (##011) or left (##010) handed configuration, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 6 x 33 inches with 1

800 Series Wall Grab Bar For Toilet (Model 003)

The 800 Series Wall Grab Bar for Toilet ##003 is a stainless steel grab bar that consists of a straight bar with a center post and one end return. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: 48, 52, or 54 inch standard lengths with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 5 to 6 pounds.

800 Series Wall Grab Bar For Toilet (Model 012)

The 800 Series Wall Grab Bar for Toilet ##012 is a stainless steel wall to floor double bar for toilets. The grab bar consists of two parallel bars that go on either side of the toilet, like a safety frame, with one perpendicular bar situated approximately 5 inches from the wall, when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 24 x 33 inches with 1, 1.25, or 1.5 inch diameter tubing. FI

800 Series Wall Grab Bar For Toilet (Model 117)

The 800 Series Wall Grab Bar for Toilet ##117 is a stainless steel wall mounted grab bar. The frame consists of 2 U-shaped railings with a perpendicular bar between rails situated 5 inches from the wall when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 24 x 24 x 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip wi

800 Series Wall Grab Bar For Toilet (Models 115 & 116)

The 800 Series Wall Grab Bar for Toilet ##115/116 is a stainless steel U-shaped grab bar with extension support. These grab bars are available with a concealed or exposed mounting. All styles have a standard safety clearance of 1.5 inches, and are available in Right (##116) or Left (##115) handed configurations. DIMENSIONS: 16 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 6 pounds.

90 Degree Grab Bar

The 90 Degree Grab Bar is a wall mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It features vertical and horizontal bars at right angles in either a left- or right-handed configuration. OPTIONS: Slide hook. DIMENSIONS: Vertical and horizontal bars are available in any combination of 12, 16, 24, or 32 inches. COLOR: Available finishes include polished chrome, antique brass, polished brass, polished nickel, satin chrome, satin nickel,

A.b.e. End Drain Wheelchair Access Shower Pan (Model Bf-6030)

The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam

A1A Ultimate Edition Tub

The A1A Ultimate Edition Tub is a walk in whirlpool bathtub designed for use by individuals with lower extremity or mobility disabilities or arthritis. The tub is constructed of heavy-duty reinforced fiberglass composites with a high gloss triple gel resin finish. It has a free standing stainless steel support frame with six adjustable leveling feet, two side panels, two technical front access panels, a tile flange, a non-slip seat and tub floor, and a safety grab bar. It has an integrated 42 li

Ableware Tko Turning Knob Operator (Model H75310)

The Ableware TKO Turning Knob Operator is designed to assist individuals with limited manual strength or dexterity to grasp, turn, and open any non-round control knob or appliance handle. The turner consists of a large T-handle attached to a large round base with retractable pins on its bottom. When the turner is pressed onto a knob the pins contacting with the knob’s surface retract, while the remaining pins surround the knob for a secure grip. The turner can be used on irregular knobs, includi

Access Steps For Bathtub

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently enter and exit a bathtub. A stainless steel rail was installed along the side of the tub that extended five millimeters out from it. A three-step ladder was made of stainless steel tubing that clips to the rail for stability. The ladder also slides along the rail if needed. A trough of plastic downspout pipe clips over the tub to protect the tub edge from the ladder. Stair treads for the ladder were made of

Accessabath Bath Safety System (Models Ab603072Sa And Ab603072Sa-Wc)

The AccessaBath Bath Safety System, models AB603072SA and AB603072SA-WC, is a roll-in shower with a seat and grab bars designed for use by individuals who use wheelchairs and individuals with balance or mobility disabilities. System components include one wheelchair accessible shower pan (models FBF-3060L or FBF-3060R) or retro-fit shower pan (models FBF-3260L or FBF-3260R); one barrier free ramp (model BF1260); one flexible threshhold (model BF-FT); one folding-L transfer seat (model HS 553N) o

Acrylic Special Care Unit (Model Sc4286)

Shower bathtub of reinforced fiberglass with right or left access. Cellular inner core with reinforced polyester outer protective coating for overall rigidity. Dimensions: 41 inches wide by 38 inches deep by 84 inches high outside dimensions. Weighs approximately 185 pounds. Vinyl shower curtain. 28 inch by 18 inch L shaped grab bar mounts on valve wall and backwall 34 inches above bottom of shower. 24 inch straight grab bar mounts vertically on valve wall with bottom 36 inches from floor. Textu

Acrylic Special Care Unit (Models Sc4983 & Sc4983)

Shower with built in grab bar with right or left access. Outside dimensions: 48 inches wide by 34 inches deep by 84 inches high. Door measures 76 1/2 inches by 38 inches. Weighs approximately 195 pounds. Options: custom grab bars and dome light. Above floor rough in. Fabricated of molded reinforced fiberglass. 2 stainles steel grab bars in unit: 18 inch by 23 inch L shaped wrap aound grab bar mounted on back wall of valve wall 36 inches above bottom of shower; 24 inch straight grab bar mounted v

Acrylic Special Unit (Model Sc6183)

Shower bathtub with right or left side access. Outside dimensions: 60 inches wide by 34 inches deep by 84 inches high. Weight approximately 225 pounds. Removable teakwood seat. Fabricated of molded reinforced fiberglass. Includes 5 grab bars. Two 42 inch straight grab bars mount horizontally on back wall at 24 and 36 inches from floor. One 24 inch straight grab bar mounts vertically on valve wall with bottom 41 inches from floor. 16 inch straight grab bar mounts horizontally on valve wall 36 inc

Acutemp Instant Water Heater (Models 150, 180, 100, 120 & Remote)

Acutemp instant water heater is a compact tankless water heater with instant temperature selection, construction of copper, brass, stainless and solid state electronics. Width 14 1/4 inches, length 24 inches, thickness 3 1/4 inches. Turning external dial selects temperature between 40 degrees (F) and 160 degrees (F). Delivers water at a controlled, safe temperature. Controls water temperature to within 2 degrees of amount dialed. Can be mounted close to points of hot water use. Temperature selec

Ada Adaptable Roll-In Shower (Model 62060103)

The ADA Adaptable Roll-in Shower, model 62060103, is a modular roll-in shower designed to provide shower access for wheelchair users. Made from solid Vikrell material, its modular design allows it to be moved around corners and through doorways. Components include an End Wall Set (model 62065103), Receptor (model 62061100), and Back Wall (model 62062103), which snap together with tongue-and-groove installation. Features include a lightly textured swirl-gloss finish, a low profile threshold for w

Ada Adaptable Transfer Shower (Model 62050115)

The ADA Adaptable Transfer Shower, model 62050115, is an accessible modular shower stall designed for use by individuals in wheelchairs. Made of solid Vikrell, this four-piece shower stall can be moved around corners and through doorways, and be fit back together with tongue-and-groove connections. Components include a Receptor (model 62051100), End Wall Set (model 62055115), and Back Wall (model 62052113). The stall has a low-profile threshold for wheelchair access; structurally reinforced fact

Ada Compliant Classroom Sinks

ADA Compliant Classroom Sinks are accessible sinks for use in a classroom environment. The sinks are available with the faucet on the left ledge with bubbler on the right ledge or vice versa; the faucet on the rear ledge with the bubbler on the left or right ledge; or both the faucet and bubbler on the right or left ledge. Drain is located in the center unless otherwise specified. The sinks are made of seamless 18 gauge type 304 stainless steel. Interior and top surfaces polished to a satin fini

Ada Compliant Ultra Flush Two Piece Pressure-Assist Toilet (Models 21-317, 21-318, & 21-319)

The ADA Compliant Ultra Flush Two Piece Pressure-Assist Toilet is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.6 gallons per flush (gpf), with pressurized flushing and siphon-jet flush action. Model 21-319 features a bedpan rim. The seat is not included. DIMENSIONS (HxDxW): 30.5 x 28.25 x 20.25 inches (model 21-317), 30.5 x 28.75 x 20.25 (model 21-318), or 30.25 x 30 x 20.5 inches (model 21-319). The rim height

Ada Compliant Wall Hung Lavatory (Model Hcl-23520-T)

The ADA Compliant Wall Hung Lavatory, model HCL-23520-T, is an accessible sink for use in public restrooms and classrooms that includes a J1174KS faucet and J115FS drain. Drain locations are centered unless otherwise specified. This model is available with rear mount concealed overflow feature. The sink is made of seamless 18 gauge type 304 stainless steel. All interior and top surfaces are polished to a satin finish. Sink is undercoated with a smooth, sound-deadening material. The sink is insta

Ada Stainless Steel Double Basins Sink (Model Pse-2020D)

The ADA Stainless Steel Double Basins Sink, model PSE–2020D, is a portable accessible sink designed for use by individuals who use wheelchairs. This portable accessible sink is equipped with two basins, each of which has a single lever faucet for each. The unit has a two 5-gallon tanks for fresh water and two 8-gallon tanks for waste water. An adjustable water heater allows the water temperature to be adjusted up to 145 degrees. It has six safety casters so it can be moved easily on firm flat su

Ada Stainless Steel Sink (Model Pse-2020)

The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch

Ada Transfer Shower Stall (Model C4136Bffus)

The ADA Transfer Shower Stall, model C4136BFFUS, is an accessible shower stall designed for use by individuals with mobility disabilities. The enclosure is molded from a single sheet of Lucite cast acrylic with no joints or seams, and with a trench drain system that directs water to the center drain, which is brass with a stainless steel strainer. A fold-up seat allows transfers from wheelchair to shower. Factory installed accessories include one wrap-around grab bar and one straight grab bar mo

Adapting A Conventional Drop-In Lavatory For Wheelchair Access

DO IT YOURSELF ENTRY --- PURPOSE: To provide access to a bathroom sink for wheelchair users. This illustrated article demonstrates how to modify the cabinet of a conventional lavatory to provide knee room for wheelchair users. Based on guidelines developed by the Center for Universal Design at North Carolina State University. Raising the counter height above the conventional 32 inches by one to two inches, installing the shallowest possible sink with the drain toward the rear of the bowl, and sl

Adjustable Grip Assist (Model 71406)

The Adjustable Grip Assist, model 71406, is a grab bar designed for use to provide balance assistance in the shower or bathtub. This grip has two pivoting handles that swivel to allow positioning for different needs. The grip can be installed and removed by flipping tabs. DIMENSIONS: Handles are 15 inches long.

Adjustable Height Clamp On Tub Rail (Model 70889)

The Adjustable Height Clamp On Tub Rail is a grab bar designed for use in bathtubs. The grab bar is made of powder-coated steel, and is adjustable in both height and width. It has a stainless steel locking mechanism for attaching to the side of a tub, with rubber pads that grip the tub without scratching. DIMENSIONS (HxW): 14 to 17 x 3 to 7 inches. COLOR: White. WARRANTY: Warranted.

Adjustable Rails And Backrest For Toilet

CUSTOM ADAPTATION PURPOSE: To enable individuals with a variety of disabilities to use a toilet. The rails were made from discarded hospital bedheads and mounted to the existing metal wall clamps. The backrest was made from the pad of a telephone table and mounted to a piece of wood connected to two wooden clamps that fit over the rails. A T-nut on either side enables the backrest to slide backward and forward along the rails for adjustment to meet individual needs. A chest strap provides addit

Adjustable Toilet Safety Rail (Model 521-1804-9601)

The Adjustable Toilet Safety Rail, model 521-1804-9601, is a safety frame and grab bar for toilet designed for use by individuals with balance or mobility disabilities. Constructed of anodized, rust resistant aluminum tubing with plastic molded armrests, the frame attaches securely with basic toilet seat hinge bolts, and provides support for the user when lowering to and rising from the toilet seat. DIMENSIONS: The tubing is 1 inch in diameter.

Afwall Ada Retrofit Toilet (Models 2294.011 & 2296.019)

The Afwall ADA Retrofit Toilet is a tall toilet designed to replace existing wall-hung toilets to bring them into compliance with the Americans with Disabilities Act (ADA) without requiring modification of the existing carrier or through-wall water supply. The Afwall toilet mounts on any standard carrier adjusted to set the rim of a conventional toilet at 15 inches above the floor, connects to the standard water supply, and automatically raises the seat height to 17 to 19 inches above the finish

Ajusta Shower.

Adjustable shower head which can be moved vertically and horizontally by sliding the nozzle on a vertical shaft. Installation can be done easily and may be installed in most showers. Solid brass. Colors available.

Al Len Faucet Gripper

Faucet wrench. One piece construction high impact plastic with lever handle. Fits over 6 dozen standard faucet handles, elliptical sink and toilet values, water meter shut off values and one to seven sided chrome handles.

American Bidet Sitzbath Appliance

The American Bidet Sitzbath Appliance is a colonic treatment toilet seat with warm water for washing and warm air for drying. It is available with hand or food operated remote control, and easily attaches to any toilet in home or apartment. It is portable and removable; no special plumbing work necessary. The seat and lid also are removeable for cleaning.

Angel Faucet

---- PROTOTYPE --------- PURPOSE: To design a prototype of a hand washing device for individuals who are one handed or had an arm amputated. The Angel Faucet is an electronic faucet with a scrubbing pad designed for use by individuals who have use of only one hand or arm. The sensor-activated tap has a scrubbing pad mounted on top of the spigot that allows the user to scrub and clean the single hand effectively. The pad is made of soft silicon, and it can be removed for cleaning. The flow of wat

Anodized Aluminum Grab Bar (Models 6128, 6070, & 6129)

The Anodized Aluminum Grab Bar is a wall-mounted grab bar designed for individuals who need some assistance in maintaining their balance in a given setting. DIMENSIONS: 1 inch in diameter; extends 2 1/2 inches from the wall; length is 12 inches between mounting holes (6128); 18 inches between mounting holes (6070); or 24 inches between mounting holes (6129).

Apollo Advantage Seated Bathing System (Models 6000 & 6300)

The Apollo Advantage Seated Bathing System is a whirlpool bathtub designed for use by caregivers in bathing individuals with mobility or severe physical disabilities. The system includes a bathing cabinet with a front door. Bathers enter the tub in a comfortable,secure chair and are bathed while seated. The chair is designed to move easily to allow the caregiver access to all areas of the body. Four whirlpool jets provide a gentle, massaging motion while a thermometer monitors water temperature.

Aqua Pt

The AQUA PT is a heat therapy system specifically designed for use in medical and rehabilitation facilities to help increase circulation and range of motion in addition to reducing muscle spasms, pain and stress. Designed as a non-invasive self-contained unit, it is intended to provide to the major benefits of hydrotherapy, dry heat therapy and accupressure/percussion therapy in a reduced time format (10-20 minutes per session). When operating the unit, the user remains clothed and dry inside a

Aqua Saver Extended Height Ada Compliant Two Piece Gravity Fed Toilet (Model 21-717)

The Aqua Saver Extended Height ADA Compliant Two Piece Gravity Fed Toilet, model 21-717, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a high, elongated seat to support wheelchair transfers and to make sitting and rising easier for users with lower extremity disabilities or arthritis. Other features include low water consumption of 1.6 gallons per flush (gpf), siphon-jet flushing action, and a glazed trapway. DIMENSIONS (HxDxW): 31 x 27.5 x 20.25 in

Arjo Century Bathing Systems

Height adjustable and fixed height bathing systems, portable free standing units with caster bases. Single attendant battery powered or hydraulic lift hygiene chair. Height adjustable for transport. Security straps. Hydraulically height adjustable lift bath trolley for recumbent patients. Wheel guide for maneuvering ease. Safety straps for chest and hips. Back support adjustable to three positions. Gel coated fiberglass tub, optional stainless steel. Stainless steel control panel. 1900 mm tub av

Arm Support Aid Rail (Model 3033)

The Arm Support Aid Rail ##3033 is a stainless steel wall to floor grab bar for use next to a toilet. The support consists of an L-shaped bar with an extension arm that gives added stability to the vertical bar. This grab bar is available in 4 concealed or 4 exposed mountings, and in right or left hand configurations. DIMENSIONS: 30 (L) x 33 (H) inches with 5 (L) x 12 (H) inch extension arm. FINISH: Brushed Satin is standard; optional finishes include non-slip grips, metallic plating, and electr

Arm Support Rail

Stainless steel grab bar from wall to floor. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 30 by 30 inches.

Ashby Bath Shortener (Model 6290)

The Ashby Bath Shortener, model 6290, is a bathtub shortener desinged for use by individuals with short stature. This unit fits inside the tub to shorten its length and is designed to prevent shorter users from slipping down the bathtub and possibly under the water. The unit attaches with rubber suction cups to the foot of the bath. DIMENSIONS: 370 x 280 x 300 millimeters. CAPACITY: 190 kilograms.

Assist Suction Tub Bar

The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l

Assistive Tub Bar

The Assistive Tub Bar is a bathtub or shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. To install, the bar is positioned vertically, horizontally, or diagonally on the tub or shower wall, then tabs on the bar are flipped down to engage dual suction cups. Releasing the flip-tabs allows the bar to be removed. The bar is made from ABS plastic and rubber. DIMENSIONS (LxW): 16 x 3.5 inches. CAPACITY: 300 pounds.

Automatic Faucet Control

The Automatic Faucet Control is a water flow control designed for use by individuals with memory or cognitive disabilities or upper extremity disabilities. This device prevents the water from being left on and provides access for those unable to turn a tap. The device replaces the aerator on existing faucets and turns the water on when the hanging wand is nudged. When the slight pressure is removed, the water automatically turns off.

Barrier Free Accessible Vanity Systems

The Barrier Free Accessible Vanity Systems are modular, wall mounted units designed for wheelchair clearance in the lavatory. Eight series of models are available in a variety of lengths and configurations from a single bowl vanity 18 inches in length to multiple bowl units up to 144 inches in length. Each series features standard stainless steel towel dispensers, waste doors, soap dispensers, and a variety of faucets and fittings.

Barrier Free Bathtub

---- PROTOTYPE --------- PURPOSE: To design a prototype of a barrier free bathtub for older adults or people with balance, lower extremity or mobility disabilities. The Barrier Free Bathtub has collapsible side walls to facilitate entry and exit of the tub. When entering the bath, the user sits down like sitting on a bed then moves his or her legs into the bathtub. The user then moves a switch located adjacent to the faucets to raise the tub walls. Once the walls are in place, the tub can be fil

Barrier Free Shower (Model 3Lrs4848B22B)

The Barrier Free Shower, model 3LRS4848B22B, is an accessible shower stall designed for wheelchair users. This three-piece shower stall is made of plywood-backed fiberglass, and has two walls and a center-drain shower pan with a low threshold. The stall has a polyester gelcoat smooth tile finish. OPTIONS: Shower valve; glide bar/hand shower; seat; grab bars; collapsible water stopper; drain; curtain and rod; amd tile accents. DIMENSIONS (HxDxW): 79 x 49 x 49 inches. Threshold curb height is 2.25

Barrier Free Shower Floor Ramp (Model Bf-1260)

The Barrier Free Shower Floor Ramp, model BF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The unit coordinates with Swanstone shower and bath systems. This ramp has a slip-resistant surface, and on its reinforced solid surface, color and texture run all the way through and cannot wear away. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Available in 37 different colors.

Barrier Free Shower Floor Ramp (Model Fbf-1260)

The Barrier Free Shower Floor Ramp, model FBF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The ramp is made of Veritek, and it can be installed without grout. This unit coordinates with the Swanstone shower and bath systems. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Bisque, bone, or white.

Barrier Free Shower Pan

The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3

Barrier Free Water Dam

The Barrier Free Water Dam is a water dam for showers designed to provide access to a roll-in shower by wheelchair and rolling shower chairs users while containing water. The soft vinyl dam is flexible for wheelchairs to roll over and then return to an upright position. It can be used in conjunction with a shower curtain to keep water in the shower area. The vinyl dam, made of poly-vinyl chloride, fits into an anodized and polished aluminum threshold. Installation requires a hack saw, measu

Barrier-Free Grab Bar (Models Bf-2448 & Gb-1432)

The Barrier-Free Grab Bar is a shower grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. This L-shaped stainless steel grab bar is for use when a shower seat is installed on either side. DIMENSIONS: 14 x 32 inches (model GB-1432) or 24 x 48 inches (model BF-2448).

Barrier-Free Grab Bar (Models Bf-5024 & Bf-5048)

The Barrier-Free Grab Bar is a wall grab bar for shower designed for use by individuals with balance or mobility disabilities. This straight stainless steel grab bar can be used on side walls when a shower seat is installed on the back wall of a shower. DIMENSIONS: Length is 24 inches (model BF-5024) or 48 inches (model BF-5048).

Barrier-Free Shower Floor With Entry Ramp (Model 360)

The Barrier-Free Shower Floor with Entry Ramp is a roll-in shower designed for use by individuals who use wheelchairs or walkers. The curbless floor and entry-ramp system can replace an existing bathtub, is designed for wheelchair access and is slip-resistant. Its offset drain placement (similar to that of a bathtub)in right- or left-hand configutation provides convenient installation or retrofit. The floor is made of molded fiberglass with resistance to mold, mildew and stains and a semigloss

Barton Little Milli Bathing System

The Barton Little Milli Bathing System is a walk-in bathtub designed for use by individuals with physical or cognitive disabilities. This system allows the user to bathe independently within a safe, secure, and hygienic environment. Its compact design allows it to be a free-standing unit or built into a tub enclosure. Tub fill is thermostatically controlled to prevent scalding. A side door provides step-in access, or the user can be transferred into the tub. OPTIONS: Whirlpool; lifter access cut

Basic Walk-In Bathtub

The Basic Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a wide door with a lever-style handle, and is available with a right- or left-hinged door. It also has a safety speed middle drain. OPTIONS: Hydrotherapy package with variable speed 12-jet hydrotherapy spa and hot temperature maintainer; whirlpool package with two-jet whirlpool system; wall surround system with three-sided matching surround wa

Bath In Bed (Model Bb-1) & Portable Bath In Bed (Model Pbb-1)

The Portable Bath in Bed, model PBB-1, is a bed shower designed for use by individuals with mobility or severe physical disabilities. This system consists of a soft, flexible under liner surrounded by a lightweight, collapsible aluminum frame that supports the liner to create a bathtub; a shower unit with an electric pump to dispense water with the capacity to provide one continuous 10.5-minute shower; a flexible hose that connects to the under liner and the included waste water collection bottl

Bath Platform Step (Model 604)

The Bath Platform Step, model 604, is a bathtub access stair designed for use by individuals with arthritis or mobility or balance disabilities. The wooden step is made of birch with non-slip cork top and is designed to make getting in and out of the bath easier by reducing the distance from the floor to the top of the bathtub. DMENSIONS: The step is 6 inches high (152 millimeters). CAPACITY: 140 kilogram.

Bath Replacement Shower (Model Xst 6030 Bfkd 1)

The Bath Replacement Shower, model XST 6030 BFKD 1, is a curbless four-piece gel-coat roll-in shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The unit fits the footprint of most existing tub/sho

Bath Replacement Shower (Model Xst 6030 Shkd 4)

The Bath Replacement Shower, model XST 6030 SHKD 4, is a four- piece gel-coat shower with built-in grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The standard left or right drain location eliminates the need to relocate the

Bath Safety Toilet Safety Bar (Model 575)

The Bath Safety Toilet Safety Bar, model 575, is a grab bar for toilet designed for use by individuals with balance or mobility disaibilies. This unit provides handles on both sides for use in getting on and off the toilet. Made of molded plastic tubing, it comes with adjustable mounting clamps and fits most standard and elongated toilets. DIMENSIONS (HxDxW): 8.5 x 23 x 18 inches. The tubing is 1 inch in diamter. CAPACITY: 250 pounds. COLOR: White.

Bath+Safe Deluxe Tub Safety Rail (Model F72716-4000)

The Bath+Safe Deluxe Tub Safety Rail, model F727216-4000, is a clamp-on grab bar for bath tub designed for use by individuals with balance or mobility disabilities. This rail features a large base with an easy-to-grasp non-metal A-shaped handle. The base clamps over the edge of the tub and tightens with a large T-shaped knob. Rubber pads inside the base protect the tub from scratches. DIMENSIONS: The rail is 14.75 inches high and fits tubs 3 to 7 inches thick.

Bath+Safe Swirl Grip Designer Grab Bars (F72460 Series)

Bath+Safe Swirl Grip Designer Grab Bars, F72460 series, are wall grab bars designed for use by individuals with balance and mobility disabilities. These bars have a swirl texture for a non-slip grasp, even when wet. Diamond-shaped mounting brackets conceal the installation screws. Mounting hardware is included. DIMENSIONS: Available in 12, 16, 18, and 24 inches long. All bars are 1.25 inches in diameter and extend 1.5 inches from the wall.

Bathcrest Walk-Thru Insert

The Bathcrest Walk-Thru Insert is a bathtub insert designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. This insert, which fits most bathtubs, lowers the barrier to bathtub entry and converts the bathtub into a walk-through shower with an entranceway close to the height of normal steps.

Bathease

The Bathease is a walk in bathtub and shower unit with a 24 inch water tight door built into front of tub. The tub is made of fiberglass. DIMENSIONS (WxDxH): Standard dimensions are 60 x 30.5 x 22.25 inches; other sizes available. COLOR: Available.

Bathmaster Sonaris

Bathmaster Sonaris is designed to assist users with limited mobility and balance as well as their caregivers during transfers in and out of the bathtub. The Bathmaster Sonaris is operated by a rechargeable battery and can perform an average of 18 lifts per charge. There is an audible beep and a blinking light to alert you when the battery needs to be recharged. The operator buttons on the hand controller are simple and large to make it easy for anyone to operate. The seat and back snap together

Bathroom Flood Alarm

The Bathroom Flood Alarm is designed for use with individuals with cognitive disabilities or Alzheimer's disease. This sensor mounts to the lower wall near the toilet and sounds a loud alarm when it comes in contact with a puddle on the floor created when a tub overflows or a toilet overflows dut to the introduction of foreign objects or other blockages. COLOR: White.

Bathroom Gem Floor Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits flush with floor and can be installed in any convenient location selected by the individual; it is designed to fit easily between the floor joists in most homes. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases when a wheelch

Bathroom Gem Wedge Toilet

The Bathroom Gem Wedge Toilet is a floor toilet designed for use by individuals who use catheters and leg bags. Intended to assist in independent management of leg bag emptying, this stainless steel toilet sits on the floor and can be installed in any convenient location selected by the individual; special installation is not required and it can be moved from one location to another. The flushing mechanism is activated by an electronic sensor when a wheelchair is moved over the unit and ceases w

Bathroom Grab Bar (Models 410085, 410086, 410087, 410088, 410090, & 410091)

The Bathroom Grab Bar are wall mounted grab bars designed for use by seniors and individuals with physical disabilities. These bars are made of stainless steel with an exposed screw mount. DIMENSIONS: Length is 9 inches (model 410085), 16 inches (model 410086), 18 inches (model 410090), 24 inches (model 410087), 32 inches (model 410088), or 36 inches (model 410091). Diameter is 1.25 inches (models 410090 and 410091) or 0.88 inches (models 410085, 410086, 410087, 410088, 410090, and 410091). COLO

Bathroom Grab Bars

The Bathroom Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. Available in straight, right angle, or left angle models, these heavy-gauge steel bars provide additional support for sitting, standing, or transferring. Hardware for installation is included. DIMENSIONS: The straight models are available in 12, 16, 18, 24, or 32 inches long. The angled models are 24 x 16 inches. CAPACITY: 250 pounds. COLOR: Chrome or white.

Bathtub Grab Bar

The Bathtub Grab Bar is a grab bar for bathtub designed for use by individuals with balance and mobility disabilities. This U-shaped bar features a wide clamp base that fits over the edge of the tub. A screw clamp adjusts the width for a secure fit. DIMENSIONS: The unit fits tub walls 3 to 7 inches thick. The bar is 19.5 inches tall and extends 14.75 inches above the tub. The width adjusts from 8 to 11.5 inches.

Bathtub Rail With Chrome Finish

The Bathtub Rail with Chrome Finish is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with support while moving into or out of the bathtub. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 7 x 0.75 x 11 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome finish.

Bathtub Safety Rails (Models 1240, 1250, 1255, 1260, & 1265)

Bathtub Safety Rails are bathtub grab bars designed for use by individuals with balance or mobility disabilities. Made from powder-coated steel (models 1250 and 1255), plastic (models 1260 and 1265), or a composite material (model 1240), these rails provide added stability when getting in and out of the bathtub. Models 1240, 1250, 1255, and 1260 have two grip handles, including a lower one that allows for a seated grip position. Model 1265 has one grip handle. The rails attach to the tub sides w

Bathtub Safety Rails (Models H100, H200, H250 & H300)

The Bathtub Safety Rails are grab bars for bathtubs designed to provide stability for individuals with physical or neurological disabilities while bathing or transferring. Model H100 is made of steel with a white polyester coating. Models H200, H250 and H300 are made of chrome-plated steel. The mounts are coated with soft plastic brushing. DIMENSIONS: Model H100 - 5.74 x 14.75 inches; Model H200 - 11.75 x 11 inches; Model H250 - 16 x 14.75 inches; Model 300 - 18 x 6 inches. WEIGHT: Model H100 -

Bci Grab Bars

BCI Grab Bars are wall grab bars designed for use by individuals with balance, mobility, or lower extremity disabilities. These grab bars can be mounted vertically, horizontally, or on an angle. DIMENSIONS: 16 or 24 inches long. COLOR: White, almond, biscuit, or gray.

Bci Walk-Thru Insert

The BCI Walk-Thru Insert is a bathtub insert designed to convert a standard bathtub into a walk-in shower tub accessible to individuals with balance, lower extremity, or mobility disabilities or arthritis. COLOR: White.

Belmont Pu Corner Shower Stool (Model 124)

The Belmont PU Corner Shower Stool, model 124, is an adjustable shower stool designed for us by individuals with mobility or balance disabilities. This stool has a plastic coated tubular steel frame and a polyurethane molded padded seat. It is designed to fit into the corner of a shower, allowing full access to the caretaker. It has four rubber tip legs. DIMENSIONS: The seat height adjusts from 20 to 24 inches, the seat width is 16 inches, and the seat depth is 13.125 inches. The footprint is 1

Beneke Samaritan Lift Seat (Model Sl 503)

The Beneke Samaritan Lift Seat, model SL503, is toilet lift seat designed for use by individuals with physical disabilities. The lift raises the seat height by 3-7/8 inches. The seat is elongated and has an open front. A full rotational stainless steel hinge bracket raises the lift seat two inches away from the bowl for cleaning. The sanitary inner rim directs all moisture into the bowl and prevents moisture flow to the outside rim. The seat is made of plastic with stainless steel mounting bolts

Beneke Universal Sheltering Arms Seats (Models Sa500 Pc, Sa501 Pc, & Sa507 Pc)

The Beneke Universal Sheltering Arms Seats, models SA500 PC, SA501 PC, and SA507 PC, are safety frames with elongated seats designed to attach to toilets. The support arms are fashioned from one continuous piece of heavy-gauge, non-corrosive stainless steel tubing with a powder coat finish. Arms have polypropylene pistol grips. Model SA500 PC comes with a closed front seat with cover. Model SA501 PC comes with an open front seat with cover. Model SA507 PC comes with a closed front seat without c

Bi-Level Tub Grab Bar

The Bi-Level Tub Grab Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Ergonomically designed to encourage a proper grasp while entering or exiting the tub, this heavy-gauge welded steel bi-level bar clamps to the tub using a stainless steel locking mechanism and rubber pads. The unit can be installed without tools for temporary or permanent use. DIMENSIONS: The bar extends 14.75 inches above the tub and adjusts to fit tubs from 3 to 7 inch

Bidan Pneumatic

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. The user activates the device by a pressing on micro switches with a foot or another part of the body. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidan Turbo

The Bidan Turbo is a toilet bidet designed for use by individuals with physical or mobility disabilities. The device consists of a toilet seat equipped to deliver a stream of oxygenized warm water for cleansing and warm air for drying. For privacy, a remote control allows the device to be activated by a caregiver outside the bathroom. The seat, lid, and antibacterial water spray nozzle are removable for cleaning. The seat fits most standard toilets. OPTION: Raised seat.

Bidetspa (Models Cb7500, Cb7510, Cb7700, & Cb7710)

The BidetSpa is a toilet bidet and personal cleansing system designed for use by individuals with incontinence. This electronic replacement toilet seat bidet attaches to most elongated or round toilet bowls. Features include posterior wash, feminine wash, heated seat, self-cleaning nozzle, warm air dryer, variable water temperature and pressure, spray guard, and automatic deodorizer. The unit is available in round (models CB7510 and CB7710) or elongated (models CB7500 and CB7700). POWER: Uses a

Bidetspa With Wireless Remote (Models Cb-7500R, Cb-7510R, & Cb-7710R)

The BidetSpa with Wireless Remote, models CB-7500R, CB-7510R, and CB-7710R, is a toilet bidet and personal cleansing system designed for use by individuals with physical or mobility disabilities or incontinence. This electronic replacement toilet seat bidet attaches to most elongated or round toilet bowls. It comes with a wall-mountable wireless remote control. Other features include posterior wash, feminine wash, heated seat, self-cleaning nozzle, warm air dryer, variable water temperature and

Boomerang Bar (Model 1220)

The Boomerang Bar ##1220 is a stainless steel wall grab bar for use in a shower or bathtub, or by a toilet. This support consists of a half diamond shaped bar bent at 110 degrees, that mounts to the wall in two places at the ends. This bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: Each side is 12 inches, with 20 inches separating the two ends; 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: B

Bridge Medical Pivot Grip Telescoping Portable Grab Bar (Models Bc400M & Bc400L)

The Bridge Medical Pivot Grip Telescoping Portable Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. Because the bar telescopes and the ends pivot and rotate, this bar offers a variety of installation options, including stretching across a corner, stretching across the inside of a bathtub, or stretching across unparallel surfaces. The bar pivots 180 degrees. The bar attaches with large suction cups which lock and release with levers. SIZES: Model

Bridge Medical Telescoping Portable Grab Bar (Model Bc400M)

The Telescoping Grip Portable Grab Bar is a portable bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. The telescoping grip allows the portable grab bar to lengthen and shorten based on the specific need of the user. It is constructed with rubber suction pads capable of holding over 200 pounds of pull force strength for a reliable hold. The telescoping grip is available in two sizes to accommodate most needs and no tools are required for installati

Bridge-Medical Single Grip Portable Grab Bar (Model Bc-201)

The Bridge-Medical Single Grip Portable Grab Bar, model BC-201, is a bathtub or shower grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has suction cups for attaching to a tub, shower, or other smooth, non-porous surfaces. The suction cups provide over 200 pounds of pull strength and will not damage surfaces. DIMENSIONS: 13 inches long. The suction cups are 4.5 inches in diameter. WEIGHT: 3 pounds.

Bringhurst Corner Shower Stool (Model 128)

The Bringhurst Corner Shower Stool, model 128, is a height adjustable shower stool designed for use by individuals with mobility disabilities. This plastic-coated shower stool with draining slats is designed to fit in the corner of the shower base. The seat is removable for ease of cleaning. The seat includes non-marring rubber tips. DIMENSIONS (HxWxH) 15 x 22.5 x 19.5 x 25.5 inches. CAPACITY: 279 pounds. WEIGHT: 13 pounds. COLOR: White

Buckingham Showereasy

The Buckingham Showereasy is a shower aid designed for use by individuals with upper extremity and severe physical disabilities. The showereasy is a shower arm device that complements the use of bath and shower boards, allowing hands-free showering and washing by the user. In use, the shower arm can be moved into three different directions, either directly upright or with a gentle push it can be moved to the left or right until it clicks into a particular position.

Carex Enablers Jar Opener & Closer (Model En17Crd)

The Carex Enablers Jar Opener & Closer, model EN17CRD, is a jar opener and tap turner designed for use by individuals with limited manual dexterity. The large round disk fits over jar lids or taps, while the pinwheel design in the surface helps secure the user's grip and concentrate hand strength while turning. DIMENSIONS (HxDxW): 4.75 x 1.25 x 4.75 inches.

Carex Ultra Grip Pivot Suction Grab Bar

The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle. Handy and easy to use, this suction cup grab bar delivers ideal balance

Carex White Wall Grab Bars

Carex White Wall Grab Bars are wall grab bars designed for individuals with balance disablities. These grab bars are made of durable heavy duty steel tubing with a powder coat finish. DIMENSIONS: The bars range are available in 12, 16, 18, or 24 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 2.5 inches in length and 2.5 inches in height. COLOR: White.

Centurion Stainless Steel Grab Bars

Stainless steel grab bars. Diameters: 1, 1 1/4, 1 1/3 inches. 1 1/2 inch hand to wall clearance. Oval or round flanges, concealed or exposed mountings. Tested to withstand 1000 pounds of pull when properly installed. Straight: 12, 16, 18, 24, 30, 32, 36, 42, 48 inches.

Child's Standing Frame For Shower

CUSTOM ADAPTATIONPURPOSE: To enable a child with spina bifida to stand in the shower. The standing frame is square-shaped with one end open. The child supports herself on the sides or the closed end of the frame. The frame is constructed of one-inch PVC tubing with rubber suction cups on the bottom of each of the four legs. There is additional bracing across the top of the closed side. DIMENSIONS: The frame's approximate height is 65 centimeters (cm). TITLE: Sara Walks! JOURNAL: TAD Journal. REF

Chrome Plated Flanged Grab Rail (Model 118)

The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: Chrome.

Classic Foot Flush

Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit.

Collapsible Dam (Models Cwr-42, Cwr-54, Cwr-66 & Cwr-96)

The Collapsible Dam, models CWR-42, CWR-54, CWR-66 and CWR-96, is a water dam for a shower designed to control water spillage from all types of barrier-free, curbless showers. This device collapses easily by foot or wheelchair pressure and features a strong self-adhesive, water-resistant tape bottom. SIZES: 42 inches (for 36-inch opening); 54 inches (for 48-inch opening); 66 inches (for 60-inch opening); 96 inches (for 90-inch opening). OPTIONS: End caps for showers with radius end walls are ava

Combination Aid Rail (Model 1632)

The Combination Aid Rail ##1632 is a stainless steel wall mounted grab bar for use in bathtubs or showers. The support consists of an L-shaped bar that mounts in two places on the vertical side, and one on the horizontal side. The grab bar is available in exposed mounting styles and 4 concealed mounting styles. The rail comes in right or left hand configurations. DIMENSIONS: 16 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is st

Combination Sink And Shower Unit.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To make an accessible bathroom facility for a quadriplegic in an affordable manner with a simple efficient low cost facility which combines the sink and shower in a single unit. Cabinet is made of lightweight sink and drainage system that can easily be removed to free the entire shower area for bathing. Shower is accessible on a roll-in track. Rolling pulley lift is fitted to a 10 foot 4 inches wide steel I beam that attaches to ceiling. SKILLS REQUIRE

Commercial Double Bowl Kitchen Sink (Model 22129)

The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall cou

Compact-Wide Soaker Walk In Bathtub

The Compact-Wide Soaker Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This model replaces and fits into the space of an existing shower stall, standard bathtub, and most small or hard- to-fit areas. Its large outward opening door can swing open up to 180 degrees, with a required door clearance of 23 inches, and is available left- or right-mounted. The tub has a low threshold; a contoured seat with built-in arm

Conserver Dual Flush Het (Model 4213)

The Conserver Dual Flush HET, model 4213, is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a water consumption of 1.0 or 1.6 gallons per flush (gpf). It is made of stain-resistant vitreous china and has a brushed metal tank lever. The Conserver features a sanitary bar on the bowl for easy cleaning and a 2-inch glazed trapway. The seat and cover are not included. Installation instructions are included. DIMENSIONS (HxDxW): 30 x 29.875 x 1

Corner Grab Bar

Stainless steel corner grab bar with vertical extension on one end. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 48 by 24 by 32 inches high. Right or left.

Corner Mounted Tub Rail (Model 3236-C)

The Corner Mounted Tub Rail ##3236-C is a stainless steel wall to floor grab bar for bathtubs. The support consists of an L-shaped horizontal hand bar that attaches to the side and back walls of the tub, and a vertical bar that attaches to the underside of the hand bar and mounts in the floor on the outside of the tub. This grab bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS (WxDxH): 36, 40, 42, or 48 inch crosspieces x 12 x 32

Corner Shower Seat (Model 0010)

Folding corner shower seat made of 16 gauge stainless steel polished to a satin finish. Bracket for wall mounting, Heavy duty stainless steel piano hinge. Overall size: 15 1/2 by 15 1/2 inches by 3/4 inch. Folds up against the wall.

Corner Shower Seat (Model F727120000)

The Corner Shower Seat, model F727120000, is a corner shower seat designed for use by individuals with balance or mobility disabilities. This shower chair fits into the corner of a stall requiring minimal space. It has a built-in front compartment that can be used to hold soap and a wash cloth. The chair is durable, rust proof, and easy to clean. DIMENSIONS (HxDxW): 16.5 x17 x 23 inches. The seat’s back height is 5.75 inches and the base is 24 inches. CAPACITY: 300 pounds. WEIGHT: 15 pounds. COL

Corner Toilet Bar (Models Gs711 & Gs712)

Stainless steel corner grab bar for toilet. 1, 1 1/4 or 1 1/2 inch diameter, 8 inch wall clearance. Satin finish. Exposed or concealed mount. 33 inches high with 8 inch perpendicular extension support. Right or left.

Corner Tub Bar.

Stainless steel corner wall grab bar. 1, 1 1/4 or 1 1/2 inch diameter. 3 1/2 inch wall clearance. Satin or safety grip finish. 20 inches by 36 inches.

Deluxe Grab Bar

The Deluxe Grab Bar is a decorative wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. The bar attaches to the wall at two points, with round, square, or diamond-shaped flanges at the points of attachment. DIMENSIONS: 12, 16, 18, 24, 32, or 36 inches long. The round flanges are 3 inches in diameter; the square flanges are 3 x 3 inches, and the diamond-shaped flanges are 4.25 inches. COLOR: Available finishes include antique brass, p

Deluxe Hand-Held Shower (Model A830004)

The Deluxe Hand-Held Shower, model A830004, is a handshower with a flexible hose designed for use by individuals who shower or bathe while seated. The flexible metal hose attaches to the existing wall-mounted shower head and the handshower provides fingertip, push-button control of the water flow. Two chrome-plated, adhesive wall mounts are included for height-adjustable storage or hands-free use. DIMENSIONS: Hose is 84 inches long and 0.5 inches in diameter.

Deluxe Handheld Shower Massager (Model 556914)

The Deluxe Handheld Shower Massager, model 556914, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit features an adjustable massaging head with three spray options, a chrome/mylar-reinforced hose, and a chrome shower arm mount. DIMENSIONS: The hose is 84 inches long.

Dependa-Bar

The Dependa-Bar is a wall-mounted grab bar designed for use by individuals with balance, walking, or mobility disabilities. Designed for use in the tub or shower or beside the toilet, this bar consists of a vertical wall-mounted grab bar with a horizontal fixed bar at the bottom, and a moveable P-shaped bar in the center. The moving bar locks every 45 degrees (5 positions), providing a support rail that moves with the user. This stainless steel unit mounts securely to structural studs behind bat

Device For Star Shaped Water Faucets.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device enables those with limited hand function to turn faucets on and off. Partially straighten out a steel S hook and saw it in half. Saw a U bolt in half. Weld half of the S hook to half of the U bolt. Drill a 1/4 inch hole in the top of a number 2 size file handle. Epoxy the file handle to the end of the U bolt. Includes diagrams. SKILLS REQUIRED: Welding. AUTHOR: Independence Factory TITLE: Make It Cheap Volume 3 REF: Middletown, Ohio: Independenc

Device To Flush Toilet

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently flush a toilet with a push-button flush mechanism. A long lever was fashioned that enables the user to operate both the full- and half-flush buttons. The device consists of a horizontal stainless steel rod housed in a stainless steel casing. At one end, the rod is fitted with a long, flat handle which the user is able to push. The other end of the rod is bent into a vertical position and the point, which is

Device To Flush Toilet

CUSTOM ADAPTATION PURPOSE: To provide a customized toilet flushing device for use by person with osteoarthritis. The adapted mechanism is designed to operate the two flush buttons easily. A mainly stainless steel frame, with three supports holds the frame in place just above the two flush buttons. The three supports are a commercial suction cup which fastens to the tiled wall behind the toilet, and two vertical legs made of small-diameter pipe, that sit on the porcelain of the cistern. Two hori

Devon Deluxe Folding Support Rail

The Devon Deluxe Folding Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. DIMENSIONS: The tubing 1.75 inches in diameter and the unit is 30 inches long. COLOR: White.

Devon Floor-Mounted Folding Rail

The Devon Floor-Mounted Folding Rail is a floor-mounted grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a floor-mounted post using an adjustable clamp. A large plastic adjustment knob enables the rail to be placed wherever needed on the post. A spring mechanism reduces the effort required to lower and raise the rail, and holds it up securely out of the way when not in use. The post is fixed to a fl

Devon Rail With Folding Leg

The Devon Rail with Folding Leg is a wall grab bar for toilet designed for use by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plate mounted on the wall. A spring mechanism allows the rail to fold up against the wall when not in use. The folding leg provides additional security and lessens strains on the wall. The height of the rail can be adjusted prior to wall mounting. DIMENSIONS: The rail is 30 inches long. The height adjusts fr

Devon Support Rail

The Devon Support Rail is a wall grab bar designed for use in the bathroom by individuals with mobility or balance disabilities. The U-shaped epoxy-coated steel tube rail is affixed to a plated mounted on the wall. A spring-loaded cam allows the rail to fold up against the wall when not in use. SIZES: Standard and short. DIMENSIONS: The tubing on both models is one-inch in diameter. The standard model is 30 inches long and the short model is 21.5 inches long. COLOR: White.

Dignity Series (Model 2653)

The Dignity Series, model 2653 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Dignity Series (Model 3052)

The Dignity Series Model 3052 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Dignity Series (Model 3260)

The Dignity Series Model 3260 is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub has a side door that swings open to allow the bather walk in and sit down on a built-in, contoured raised seat. The door has an oversize handle, and a low entry threshold to facilitate entry. There is a large grip bar on the back wall of the tub and a slip-resistant floor. A water jet massage system with in-line heater and air massage system

Drain Fitting (Model Lkad18)

Drain Fitting, model LKAD18, is an offset draining fitting designed for use under wheelchair-accessible sinks. Made of chrome-plated brass, it has an offset tailpiece that allows wheelchairs to fit under the sink and a chrome-plated steel perforated grid strainer. DIMENSIONS: Drain opening is 3.5 inches in diameter; the strainer is 3 inches in diameter; top diameter is 4.5 inches. The tailpiece is offset up to 12.75 inches.

Drain Fitting (Model Lkad35)

The Drain Fitting, model LKAD35, is an offset drain fitting designed for use in wheelchair-accessible bathrooms and kitchens. This fitting has a stainless steel body and strainer basket, with a chrome-plated brass tailpiece that is offset to allow wheelchairs to fit under the sink. The drainer has a flex stem and rubber stopper. DIMENSIONS: Drain opening is 3.5 inches in diameter. The top diameter is 4.5 inches. The tailpiece is offset 12.75 inches.

Dual Level Bathtub Rail

The Dual Level Bathtub Rail is a grab bar for the bathtub designed for use by for individuals with mobility disabilities. The rail provides the individual with a high/low grip support, including a straight crossbar, for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the side of the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxDxW): 16 x 1 x 12 inches. The clamp adjusts from 3.5 to

Easy Bath

Easy Bath is a walk in bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub features a low entry and is twice as deep as a standard tub. It is available with either a left- or right-hand door. It has a built-in, anti-slip, contoured seat; a built-in safety bar; and Giovanni chrome fixtures and drain assembly. DIMENSIONS: Entry is 6 inches high. COLOR: White. WARRANTY: 10-year warranty and a lifetime guarantee on the tub door seal.

Easy Bath Plus

Easy Bath Plus is a walk in whirlpool bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk in tub with a low entry has multiple adjustable speed massage jets. It is available with either a left- or right-hand door, and comes with a built-in, anti-slip, contoured seat; a built-in safety bar; and Giovanni chrome fixtures and drain assembly. DIMENSIONS: The entry is 6 inches high. COLOR: White. WARRANTY: 10-year warranty and a lifetime guarant

Easy Bathe Walk-In Bathtub

The Easy Bathe Walk-In Bathtub is a walk-in bathtub designed for use by individuals with mobility or balance disabilities. Designed to fit most bathrooms, this tub features a guaranteed leak-free design and compact footprint; a low-level entry; a wide access door with a choice of right or left entry; an integral safety handle; a contoured, slip-resistant seat and backrest; height-adjustable showerhead; and, temperature-controlled hot water. The unit is available in corner or back-to-wall configu

Easy Living 48 Inch Shower (Model Xst4836 Bf .5 Curbless)

The Easy Living 48 Inch Shower, model XST4836 BF .5 CURBLESS, is a one piece gel-coat 48 inch curbless roll-in shower with bult-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wa

Easy Living 48 Inch Shower (Model Xst4836 Sh 4.0 Low Threshold)

The Easy Living 48 Inch Shower, model XST 4836 SH 4.0 LOW THRESHOLD, is a one-piece gel-coat shower with built-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a low, step-over four-inch dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, a leg ledge, and soap/shampoo ledges. The half-inc

Easy Living 48 Inch Shower (Model Xst5038 Bf .5 Curbless)

The Easy Living 48 Inch Shower, model XST5038 BF .5 CURBLESS, is a one-piece gel-coat shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model also offers a four-inch tile finish with diamond accents, a textured slip-resistant floor, a double wall leg ledge, and soap/shampoo ledges. The half-inch tri-cell

Easy Living 60 Inch Shower (Model Xss 6032 Sh 4.0)

The Easy Living 60 Inch Shower, model XSS 6032 SH 4.0, is a one piece gel-coat shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a low four-inch step-over dam, a six- inch tile finish with diamond accents, a textured slip-resistant floor, a tall bench seat, and seat-height soap/s

Easy Living 60 Inch Shower (Model Xst 6033 Sh 4.0)

The Easy Living 60 Inch Shower, model XST 6033 SH 4.0, is a one- piece gel-coat 60 inch shower with a built-in seat and grab bar designed for use in assisted living, nursing home and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a four-inch low step-over dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, and seat-height soap/shampoo ledg

Easy Living 60 Inch Shower (Model Xst 6038 Bf 2.0)

The Easy Living 60 Inch Shower, model XST 6038 BF 2.0, is a one- piece gel-coat roll-in shower designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A two-inch curbless threshold is standard. This model offers a six- inch tile finish with diamond accents, a textured slip resistant floor, and soap/shampoo ledges. The half-inch tri-cell wall

Easy Toilet Riser

The Easy Toilet Riser is a toilet riser designed to elevate a toilet for people with mobility or balance disabilities. This unit attaches to the floor and is designed to fit toilets with a base that is 14 inches or less in length. The unit is constructed of ridged poly vinyl chlorate and elevates the entire toilet by 4 inches. It is easy to clean and can be used in homes or commercial facilities. The unit comes with two 6-inch closet bolts, two wax rings, one extended water pipe, two washers, tw

Economy Hand-Held Shower (Model A830001)

The Economy Hand-Held Shower, model A830001, is a handshower with flexible hose designed for use by individuals with spinal cord injury or mobility or balance disabilities. The unit fits over the tub faucet and is equipped with a flexible vinyl hose. A suction lock wall bracket is included. DIMENSIONS: The unit fits faucets with outside diameter of 1.375 inch to 1.75 inches and the hose is 60 inches long.

Economy Shower Stall (Model Ess-1)

The Economy Shower Stall, model ESS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed, and it can be used for showering or as a privacy enclosure for a commode. The stall features replaceable vinyl shower curtains on all four sides for privacy. Other standard features include a shower unit with an electric pump for dispensing water fo

Economy Tub Rail

The Economy Tub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities. The bar is made of chrome-plated steel with rubber pads on all tub contact points. Knurling around grab bar diameter provides a permanent no-slip grip. DIMENSIONS: 8 x 11 or 7 x 17 inches. WARRANTY: Limited lifetime warranty.

Electronic Toilet Flush Valve (Model 44-911)

The Electronic Toilet Flush Valve, model 44-911, is a toilet flushing aid designed for use by individuals with Alzheimers disease or cognitive disabilities who forget to flush the toilet, or by individuals with grasping, fine motor, or upper extremity disabilities. This electronic module can be used to retro-fit an existing toilet. When it detects the presence of the user, it enters stand-by mode. The toilet flushes when the user leaves the detection area. The unit also flushes the toilet automa

Elevated Bathtub Seat

Elevated Bathtub Seat is designed for children and adults with physical disabilities who have difficulty sitting in a tub or standing in a shower. The open front and coccyx dimple in the back provide access for personal hygiene. Additional features include smooth, rounded corners for comfort, a finger indent handle for transport and suction cup feet for stability. DIMENSIONS: 13 x 15 ½ x 8 1/2” (33 x 39 x 22 cm) CAPACITY: Supports up to 400 lbs. (181.8 kg) WEIGHT: 4 ½ lbs. (2kg) WARRANTY/GUA

Elevating Shower Trolley

Wheeled trolley can be used as stretcher to transfer person from bed, can be lowered for wheelchair transfer. Waterproof shower mattress has built in pillow, sides raise with side rails. Control panel has thermostat, shower hose and low sink for use under drain hole at end of mattress. Can be tilted to side for cleaning.

Elongated Wall Hung Top Spud Bowl (Models 25-030 & 25-031)

The Elongated Wall Hung Top Spud Bowl, model 25-030, is a tall toilet designed for use by individuals with mobility disabilities. This toilet has a wall waste outlet, a spud for the flushometer valve, and a siphon-jet. The vertical rough in (the distance from the floor to the center of the waste drain) can be adjusted to increase the height of the installed toilet. Model 25-031 has a bedpan rim. A seat is not included. DIMENSIONS (HxDxW): 13 x 25.5 x 14.5 inches. The vertical rough in is 7.25 in

Empower Walk-In Bathtub

The Empower Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk-in tub is the length of a standard bathtub, with a side door and a contoured bath seat. After entering the tub and sitting on the seat, the user turns a handle to seal the door and open the taps. After the tub is filled, the user presses a button to be gently lowered into the water. After bathing, the user presses the button again to be raised

Endurant Receptor Ramp

The Endurant Receptor Ramp is a shower ramp designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The ramp offers a transition between the floor and a BioPrism shower base receptor (sold separately). The ramp has a non-skid, textured surface which helps prevent slips and falls. It is manufactured from a solid pour of BioPrism solid surface. DIMENSIONS (WxL): 12 inches wide; up to 72 inches long

Ergobar

The Ergobar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This all-acrylic grab bar is made of 100 percent industrial-grade acrylic and it comes in a variety of standard or custom shapes and sizes. COLORS: Available in the same shades as the acrylic sheets used by bathtub manufacturers, or in custom colors.

Escape Walk In Tub (Models Ltow5030 & Ltowj5030)

The Escape Walk In Tub, models LTOW5030 and LTOWJ5030, is a walk-in bathtub designed for use by individuals with mobility disabilities. This single-piece tub is made of fiberglass with a polyester gelcoat finish, and is available with a right- or left-hand drain. Features include waste/overflow, safety assist bar, standard valve, tub filler, and hand shower package. Model LTOWJ5030 has air and water jets. OPTIONS: Wall surround; curtain and rod; and tile accenting. DIMENSIONS (HxDxW): 37.75 x 30

Essential Bath Safety Plus Bathtub Safety Bar (Model B3200)

The Essential Bath Safety Plus Bathtub Safety Bar, model B3200, is a grab bar for bathtub designed for use by individuals with arthritis or balance or lower extremity disabilities. Made of enamel-coated steel, this rounded A-shaped bar offers two levels of support. A rubber-padded clamp adjusts to secure the bar to tub walls. DIMENSIONS: The steel bar is one-inch in diameter and the clamp fits tub walls 3 to 7 inches wide.

Essential Bath Safety Plus Grab Bar (Models B3212, B3216, B3218, & B3224)

The Essential Bath Safety Plus Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity diisabilities, arthritis, or spinal cord injury. Made of enamel-coated steel, the bars have round mounting plates and include stainless steel mounting hardware. DIMENSIONS: Model B3212 is 12 inches long, model B3216 is 16 inches long, model B3218 is 18 inches long, and model B3224 is 24 inches long. All models are one-inch in diameter and mount 1.5 inches from the

Euro-Tub Walk-In Bathtub

The Euro-Tub Walk-In Bathtub is an accessible whirlpool bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub provides a deep soak in a hydrotherapy spa system. Features include an anti-slip floor and seat; right- or left-mounted door; 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held shower head; curtain rod and matching shower curtain. DIMENSIONS (HxLxW): 41 x 49 x 26 inches. The door

Extend A Hand

Extend A Hand is a wall grab bar designed for use by individuals with balance and mobility disabilities. Suitable for use in tubs and showers, near toilets, in hot tub areas, and more, this bar installs directly to existing wall studs and features a C-shaped horizontal extension for additional leverage and assistance. The extension locks in place with push-button releases. The extension can be left permanently in position or flipped up and out of the way when not in use. DIMENSIONS: 11 x 12, 16

Ez-Bathe

The EZ-BATHE is an inflatable bathtub designed for use with individuals with mobility disabilities or who are unable to leave the bed. The user is placed in the deflated tub on the bed using the half sheet transfer method. The 20-gauge vinyl tub Inflates with a vacuum pump in 30 seconds. A hand-held shower head connects to a bathroom faucet and a hose connects to a faucet at a sink or bathtub for filling and draining. The set includes the tub, an inflatable pillow, the hose, the shower head and

Ez-Shower

The EZ-SHOWER is a portable shower designed for use with individuals with mobility disabilities or who cannot leave the bed. Made of mildew-resistant vinyl, the EZ-SHOWER hangs on a bed post or IV pole by the wooden carrying handle or nylon cord and holds 2.5 gallons of water. An easy-fill spout prevents splashing snd snaps shut for watertight seal. The included flexible 4-foot hose has an on/off valve for easy water control. WARRANTY: 1-year limited warranty.

Faucet Extension

The Faucet Extension is a lever tap handle designed to enable users with a weak grip to operate a kitchen or bathroom faucet. The extension lever may also help to make a sink's taps more accessible to wheelchair users. The lever is a strip of stainless steel that has one end bent up to form a vertical handgrip. The unit is bolted into place on top of the existing faucet tap. PROTOTYPE DEVELOPMENT: Designed by John Duffus for users with poor grip strength to increase the leverage, reach, and grip

Faucet Genie

The Faucet Genie, also called Auto Spout SK-FG001, is a hands-free faucet designed for use by individuals with upper extremity disabilities. This unit attaches to existing kitchen, bathroom, or laundry room faucets and is activated by placing the hands under the faucet. The distance between unit and the activation sensor is adjustable. The unit also has a feature that enables continuous water flow for three minutes before it automatically shuts off. POWER: Uses 1 pc lithium battery.

Fawssit Foldaway Wheelchair Shower (Models S2000, Ss4040, R3000, T4000, & B5000)

The FAWSsit Foldaway Wheelchair Shower is a portable shower designed for use by individuals who use wheelchairs. This self-contained portable shower stall can be used anywhere there is access to warm water, a drain and an electric outlet. The unit comes completely assembled and no tools are required for set up. The unit has a nylon mesh embedded double-layer vinyl drain pan. The custom design allows for maximum water removal and Velcro strips to hold sides in place. The front folds down for whee

Finestra Walk In Bath

The Finestra Walk In Bath is a walk in bathtub for people with balance, lower extremity or mobility disabilities. The Finestra is available in several configurations that can include water or air jets. All versions of the Finestra include a grab bar; an integrated seat available heights of 17 or 14 inches; an easy access door with magnetic seal and interior handle lock; a slip-resistant bottom; and a chrome rotary drain. It is made of easily cleaned, high-gloss acrylic over an aluminum frame wit

Fixed Position Shower Seat (Models 712 & 712H)

Corner mounted shower seat of 16 gauge stainless steel, satin finish. Overall dimensions are 15 1/2 inches by 15 1/2 inches by 22 inches with 1 inch lip. Seat height determined by wall mounting. Model 712h ($188.95) is hinged.

Flood Buzz

The Flood Buzz is a flood alarm designed for use with individuals with cognitive disabilities or Alzheimer's disease. This sensor can be placed on the floor near a toilet or bathtub, and it will sound a loud (95 decibels) alarm when it comes in contact with water on the floor created by an overflow or leak. This flood alarm can also be used to detect leaks near washing machines and hot water heaters. DIMENSIONS: Diameter is 1.5 inches. POWER: Includes a non-replaceable battery estimated to last

Floor Mounted Tub Rail (Model 3236)

The Floor Mounted Tub Rail ##3236 is a stainless steel wall to floor grab bar for the bathtub. The support consists of a U-shaped hand bar that mounts at two points to the wall, and two vertical bars attached to the underside of the hand bar that extend to and mount in the floor on either side of the tub. Due to this construction, this model may be especially suited for island tubs. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS (WxDxH): 36,40, 42, or 48 inch

Flume Bathtub

---- PROTOTYPE --------- PURPOSE: To design a prototype of a accessible tub that can pivot to facilitate tranfers in and out by individuals with lower extremity, balance or mobility disabilities or spinal cord injury. The Flume (seesaw) bathtub has a unique design based on principle of playground seesaws and slides while keeping the safety of individuals with mobility disabilities in mind. The Flume’s point of entry can be tilted downward so that it is easy for an individual to move his or her b

Foldable Shower Seat (Model 9404)

The Foldable Shower Seat, model 9404, is a shower seat designed to mount directly to the wall of the shower for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty standing in the shower. The seat folds down against the wall when not in use. The seat has a horseshoe design for hygiene. DIMENSIONS: The seat height can be adjusted from 20 inches to 23 inches and is 16 inches x 16 inches. When folded the seat is 5 inches wide. CAPACITY: The weight capac

Folding Seat (Model 8210)

Folding shower seat with stainless steel frame and naugahyde seat. Mounted on 3/8 inch marine plywood base, projection 23 inches, overall size 32 by 20 inches. Folds up against the wall.

Folding Shower Chair

The Folding Shower Chair is a folding shower seat designed for use by individuals with mobility or balance disabilities. This height-adjustable chair has an epoxy polyester lacquered steel frame and an injection-molded polypropene seat and back with an embosed anti-slip pattern. The seat can be inclined forward to assist people with limited joint mobility in the knees and hips and can be ordered with or without a recessed cutout for personal hygiene. Height adjustment is accomplished by means of

Folding Shower Seat (Models 956 & 9561)

The Folding Shower Seat ##956 and ##9561, is a wall mounted shower seat designed for public facilities that folds up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The Wall bracket is made of 16 gauge stainless steel with piano hinges. The retaining bracket is 11 gauge stainless steel with a positive bullet-type catch designed to hold the seat securely in an up or down position. The seat is blow-molded polyethylene that will not ret

Folding Shower Seat (Models B-517 & B-518 )

The Folding Shower Seat, models B-517 and B-518, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is L-shaped and is foam-padded, water-resistant naugahyde seat with an enclosed plywood base. DIMENSIONS: Seat is 32.875 inches wide and 1.5 inches thick; when extended, it projects 22.6875 inches from the wall. CAPA

Folding Shower Seat (Models B-5181 & B-5191)

The Folding Shower Seat, models B-5181 and B-5191, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is available in an L-shape (model B-5181) or rectangular shape (B-5191). The seat is constructed of durable, water-resistant solid phenolic with slats for drainage. DIMENSIONS: Seat is 33 inches (model B-5181) or 18

Folding Teakwood Shower Seat (Model 9559)

The Folding Teakwood Shower Seat ##9559 is designed to be wall mounted in the shower and to fold up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The seat is made of 3 handrubbed teakwood slats with rounded edges. The wall bracket is made of 16 gauge stainless steel with piano hinges, and the retaining bracket is 11 gauge stainless steel with positive, bullet-type catch to hold the seat securely in an up or down position. MOUNTING:

Foot Flusher

The Foot Flusher is designed for use by individuals with limited use of their upper extremities or limited coordination and balance of their lower extremity while flushing the toilet. Step 1: Gather Materials. Materials: 2 Paper Towel Rolls. 1 Wire Hanger. 1 Kiwi Express Shoe Shiner (or similar). 1 Package of 3M (I used the "Utensil Hooks" but technically any one of these Command Strip products will work - more on that later). 1-5 Rubber Bands. Some tape or glue.

Franklin Brass Ada Grab Bars (Model 5736, 5742, & 5748)

Franklin Brass ADA Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar is made of 18- gauge, type 304 stainless steel tubing with a round flange for concealed mounting. Stainless steel Philips head screws are included. DIMENSIONS: All models have an outside diameter of 1.25 inches with 1.5 inch wall clearance. The bar is available in 12, 16, 18, 24, 30, 36, 42, or 48 inches long. The flange is 3 inches in diameter. CAPACITY: 500 pounds. COL

Franklin Brass Shower Seat With Phenolic Slats (Model 5404Lh & 5404Rh)

The Franklin Brass Shower Seat with Phenolic Slats is a folding shower seat designed for use by individuals with balance or lower extremity disabilities or arthritis. This seat is made of solid phenolic resin with laminated wood grain, 14-gauge stainless steel tubing, and 12-gauge stainless steel mounting brackets. The seat folds up against the wall when not in use, and is available in left-hand (mode l5404LH) or right- hand (model 5404RH) configuration. DIMENSIONS: The mounting heightis 19 inch

Franklin Brass Swing Up Bar (Model 5215)

The Franklin Brass Swing Up Bar, model 5215, is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. Made of 18-gauge stainless steel with a knurled gripping surface, this bar swings out from the wall and is curved to provide upper and lower gripping surfaces. It comes with a stainless steel wall retaining clip to secure its upright position. DIMENSIONS: The 1.25-inch diameter bar projects 30 inches off the wall. CAPACITY: 500 pound

Freestanding Shower Support Railing

CUSTOM ADAPTATION PURPOSE: To provide shower support for people with mobility and balance disabilities who do not or cannot have rails installed in the bathroom for the toilet or shower. Freestanding rails are adapted for use in the shower to provide support and an overall feeling of safety. Freestanding rails used as a toilet rail system are adapted by using 25 millimeter (mm) stainless steel tubing to add new rails at 1065 mm above the floor. Non-slip foam tubing is glued to the upper rails,

Freewill Barrier-Free Transfer Shower Module (Models K-12100 & K-12101)

The Freewill Barrier-Free Transfer Shower Module is an accessible roll-in shower module with built-in seat and grab bars, designed for use by individuals with mobility disabilities or spinal cord injury. This one-piece acrylic shower stall has an integral soap ledge, brushed or polished stainless steel grab bars, a fold-up seat on left (model K-12101) or right (model K-12100), molded-in floor pattern, and pit installation option. DIMENSIONS (HxLxD): 84 x 45 x 37.25 inches. Inside dimensions are

Front-Door Walk-In Bathtub

The Front-Door Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Its door is located on the front of the bathtub. Other features include an anti-slip surface on the floor and seat; right- or left- mounted doors; a 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held showerhead; palm door latch; and curtain rod and matching shower curtain. Fixtures can be mounted

Fun Foot Flush

Foot Flush is a foot-operated toilet flushing aid designed for use by individuals with mobility, upper extremity, or neurological disabilities or arthritis. This device fits most flapper-style tank toilets and does not interfere with the operation of the standard flush handle. Once installed, the device sits on the floor and enables the toilet to be flushed simply by stepping on the unit. This unit has a foot-shaped base, complete with toes.

Futura Faucet Model 900

Electronic faucet turns on automatically when user's hands enter infrared detection area within bowl perimeter, turns off when hands are removed. Operates at pre-set temperature, either warm or cold water. Heat valve optional. Solenoid has few moving parts. Operation unaffected by most chemicals and minerals frequent in water supplies. Flow constant at all pressures. Self-cleaning diffuser. Chrome-plated, solid cast brass body. Sensor shuts off water after 30 to 45 seconds if something is left i

Gatorgrip Bath Tub Mat

The GatorGrip Bath Tub Mat is a removable slip-resistant coating for bathtubs designed for use by individuals with balance or walking disabilities. This mat is designed for peel and stick application and is suitable for all bathtub and shower types, including metal, porcelain, fiberglass, non-skid surfaces, etc. Designed to be extra-thick and soft, the mat has peel and stick adhesive that seals out mold and mildew, eliminating the need to remove it to clean underneath. The three-dimensional surf

Gatorgrip Sheet

GatorGrip Sheets are removable non-slip surfaces designed for use by individuals with balance disabilities. Each sheet has a peel and stick adhesive backing and a soft, non-slip suface for walking or standing. The sheets are made of a polymer psuedo-rubber that is chemically resistant to mold and mildew. DIMENSIONS (LxW): 42 x 64 inches. COLOR: Beige and white, black and gray, red and black, blue and white, green and white, gray and white, or pink and white.

Gelcoat Special Care Unit (Model Sc4883)

Shower with built in grab bar, adjustable soap-dish and rear corner seat. Seat: 16 by 16 inches, 18 inches off shower floor. Outside dimensions: 48 inches wide by 36 inches deep by 78 inches high. Door size 66 7/8 by 43 7/8 inches. Weight approximately 140 pounds. Fabricated of molded fiberglass. One 18 inch straight stainless steel grab bar mounts vertically on valve wall 31 inches above floor bottom. One 16 inch by 24 inch L shaped grab bar mounts on back wall with long leg installed verticall

Geriatric Tub Bar

Stainless steel U shaped grab bar for end tub wall. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. Exposed or concealed mount. 39 inches wide, 14 inch high sides. Satin finish.

Ginger Canterbury Grab Bars

Ginger Canterbury Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, and corner configurations with concealed mounting hardware. OPTIONS: Decorative ring. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Antique nickel, polished brass, polished

Ginger Circa Grab Bars

Ginger Circa Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy-gauge grab bars are forged in solid brass. They are available in straight, left or right L-shaped, and corner configurations and come with concealed mounting hardware. DIMENSIONS: Straight grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. All lengths and configurations are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, satin nickel

Ginger Hotelier Grab Bars

Ginger Hotelier Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities or arthritis. These heavy- gauge grab bars are forged in solid brass and are available in straight, left- or right-hand L-shaped, or corner configuration, with concealed mounting hardware. DIMENSIONS: Stright grab bars are 12, 16, 18, 24, 32, 36, 42, or 48 inches long. The bars are 1.25 inches in diameter. COLOR: Polished brass, polished chrome, or satin nickel.

Grab Bar

DO-IT-YOURSELF-ENTRY --- PURPOSE: To assist an individual with mobility disabilities in rising from the toilet. A suction cup was attached to each end of a grab bar. The grab bar was then attached to the front of the bathtub, which faces the toilet. Using a rope attached to the bar, the individual pulls him/herself to a standing position. MATERIALS: Grab bar, suction cups, and rope. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, N

Grab Bar (Model 3100 K Series Type 02)

Stainless steel grab bar, 48 inches in length or 60 inches. Peened finish for better grip, wall mounted. 1 1/4 inch diameter, 18 gauge stainless steel. Available with concealed or exposed mounting.

Grab Bar (Model 3100 K Series Type-15)

Stainless steel wall to floor Grab Bar; 33 inches high and 30 inches projected out from wall with vertical bar to attach to floor; peened finish for better grip. 1 1/4 inch diameter, 18 gauge.

Grab Bar - Knurled Chrome (Models 1234A, 1234B, 1234C, 1234D, & 1234E)

The Grab Bar- Knurled Chrome is a wall grab bar designed for use by individuals with balance or mobility disabilities. Made of chrome-plated steel, the bar mounts vertically or horizontally. Knurling around grab bar diameter provides a no-slip grip. DIMENSIONS: Length is 12 inches (model 1234A), 16 inches (model 1234B), 18 inches (model 1234C), 24 inches (model 1234D), or 32 inches (model 1234E). Grip diameter is 1.25 inches. The distance from the wall is 1.5 inches. CAPACITY: 250 pounds. WARRAN

Grab Bar - Powder Coated (Models 1244, 1244A, 1244B, 1244C, 1244D, & 1244G)

The Grab Bar- Powder Coated is a straight, wall-mounted grab bar designed for use by individuals with balance or mobility disabilities. The bar is made of powder-coated steel tubing with large 3-hole welded flanges, and can be mounted vertically or horizontally. DIMENSIONS: Length is 12 inches (model 1244), 16 inches (model 1244A), 18 inches (model 1244B), 24 inches (model 1244C), 32 inches (model 1244D), or 36 inches (model 1244G). Tubing is 1 inch in diameter; the frame is 2.5 inches in diamet

Grab Bar For Toilet (Model 3100 K Series Type-04)

L shaped Grab Bar; wall mounted 24 inches above floor; horizontal bar 16 inches long; vertical bar 32 inches long. 1 1/2 inches wall clearance; peened finish for better grip; available for left hand and right hand.

Grab Bar For Wall

Stainless steel grab bar for tub wall. 8 inch extensions for support on each end. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 36 inches long.

Grab Bar For Wall

Stainless steel corner grab bar for tub wall. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. 8 inch extension for support. Exposed or concealed mount. 34 inches long. Satin finish. Left or right.

Grab Bar For Wall.

Grab bars, outside diameter 1 1/4 to 1 1/2 inches, meets 250 pound stress load, does not rotate in fittings, optional concealed or exposed mounting, smooth safety guard finish. Lengths: straight 24, 36, 42 inches or two different models at 48 inches long. Also l shaped, 36 by 36 inches long.

Grab Bar Series

Wall mounted stainless steel grab bars. Standard and custom styles available.

Grab Bars

DO IT YOURSELF ENTRYPURPOSE: To aid in selecting and installing grab bars for use by individuals with balance, mobility, or lower extremity disabilities. This article, part of a chapter entitled "Bathroom & Washing Up," discusses fit and placement, materials, weight support, and installation of grab bars. AUTHOR: Greenstein, D. TITLE: Grab Bars. BOOK: Easy Things to Make to Make Things Easy: Simple Do-It-Yourself Home Modifications for Older People & Others with Physical Limitations. REF

Great Grabz Horizon Grab Bars

Great Grabz Horizon Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. The bars are designed to be stylish for residential use. DIMENSIONS: 10, 24, 36, or 42 inches long. Distance from wall to bar is 2.5 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

Great Grabz Splash Peak Grab Bar

The Great Grabz Splash Peak Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern design that rises to a peak, making one end higher than the other; concealed mounting; and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 24 or 36 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inch

Great Grabz Splash Plateau Grab Bar

The Great Grabz Splash Plateau Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These stainless steel bars have a modern linear design, concealed mounting, and twist lock flanges. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 12, 24, 36, or 48 inches long. These bars are 1.25 inches in diameter and the distance between the wall and the bar is 1.5 inches. COLOR: Stainless, polished stainless

Great Grabz Wave Grab Bars

Great Grabz Wave Grab Bars are wall grab bars designed for residential use by individuals with balance or mobility disabilities. The bar has a decorative wave shape. DIMENSIONS: Length is 24 or 36 inches. COLOR: Polished chrome, polished brass, satin nickel, or wrought iron finish. WARRANTY: Warranted to be free of manufacture defects in material and workmanship for 1 year from date of delivery.

Great Grips

Great Grips are door knob or faucet covers designed for use by individuals with arthritis, grasping disabilities, or little or no manual dexterity or strength to open doors or turn faucets. These soft thermoplastic sleeves slip over existing rounded door knobs or faucets. Made of a soft latex-free material, they have a smooth surface to assist in turning. OPTIONS: Built-in AgION antimicrobial, a combination of silver ions bonded to a ceramic material called zeolite; built-in glow-in-the-dark cry

Gripper Water Faucet Handle (Model 003)

The Gripper Water Faucet Handle, model 003, is a tap turner designed for use by individuals with grasping disabilities, arthritis, Parkinson’s disease, or use of only one hand. This turner attaches over existing tap handles, giving users a gripping area with more leverage. The device features red and blue color-coded indicators that identify hot and cold valves, and two separate grip locks that are compatible with most valve and spigot handles are included. COLOR: White

Grohmix Concealed Thermostat

Thermostatic and pressure balanced water valve for bathtub or shower. Safety stop at 100 degrees fahrenheit.

Groovy Grip Grab Bar (Models H724580016, H724580018, & H724580024)

The Groovy Grip Grab Bar is a wall grab bar for bathroom, designed for use by individuals with balance or mobility disabilities. This wall-mounted plastic grab bar has grooved surfaces to provide a non-slip grasp, even when wet. Mounting brackets conceal the installation screws. Hardware and detailed installation instructions are included. DIMENSIONS: 1.5 inches in diameter. The distance from wall to bar is 2 inches. Availabe lengths are 16 inches (model H724580016), 18 inches (model H724580018)

Guardian Hand Held Shower With Ergonomic Handle (Model 98035)

The Guardian Hand Held Shower with Ergonomic Handle, model 98035, is designed for use by individuals with physical disabilities who require a flexible shower hose to direct the spray while either standing or sitting. This hand-held unit has an extra long hose and an ergonomic handle with a textured surface. The unit provides a choice of standard or pulsating sprays. It installs on existing 1/2-inch shower arm, and comes with a mounting bracket to allow for fixed usage as well as hand held operat

Hafele Hewi Lifesystem Hinged Support Rail

The Hafele HEWI LifeSystem Hinged Support Rail is a wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This rail is made of a smooth, non-porous nylon, resistant to cosmetic staining and disinfectants. This single-arm rail lifts up and out of the way when not in use and has a non-slip ergonomic-shaped polyurethane grip for supporting, steadying, and pulling oneself up. The rail is made of epoxy-coated, mat aluminum with chrome plated accents. M

Hafele Hewi Lifesystem Support Shelf

The Hafele Hewi LifeSystem Support Shelf is a bathroom wall shelf with grab bar designed for use by individuals with balance or mobility disabilities. The unit has a non-breakable shelf with raised edge, integrated support handles used for support to stand up independently, and to hold accessories. The support handles are manufactured at an angle of 30 degrees. The unit has an easy-to-clean surface and the mirror can be mounted with the shelf in the center. The shelf has concealed assembly with

Hampshire Contoured Tap Rail (Model 09-107-8534)

The Hampshire Contoured Tap Rail, model 09-107-8534, is a bathtub grab bar designed for use by individuals who need support rising from or sitting down in a bathtub. The plastic rail is fixed to taps by means of a clamping bar. Its contoured plastic moldings enhance the user's grip on the rail when raising and lowering. In use, the rail rests on the edges of the tub; the unit may be folded up against the wall when not in use. DIMENSIONS: Max diameter of taps 80mm (31/8"). Distance of bar from ta

Hand Held Shower Set (Model 09300)

The Hand Held Shower Set is a handshower with flexible hose designed for use by individuals with mobility or balance disabilities. The Hand Held Shower Set mounts to the existing shower head. It consists of long hose with a push-button on/off control. No tools are necessary for installation. DIMENSIONS: The hose is 84 inches long. COLOR: White

Hand Held Shower Spray & Diverter Valve

The Hand Held Shower Spray and Diverter Valve is a handshower with a flexible hose designed for use by individuals with mobility disabilities. The extra-long nylon reinforced hose allows the individual to bathe while sitting on a bath bench in the shower or tub. An on-off button at the shower head provides control of the water flow. The Diverter Valve gives the option of using the existing shower head or using the hand held shower spray. The Shower Spray attaches to a standard half-inch shower a

Handi-Grip Portable Grab Bars

Handi-Grip Portable Grab Bars are wall grab bars designed for use by individuals with balance or mobility disabilities. These telescoping bars attach to most smooth surfaces such as marble, glass, or tile, with strong suction cups at each end. Flip switches at each end anchor or release the bar. Most models are available with or without a safety indicator: When the rocker is flat to the lever, the suction is adequate for the load, when the warning rocker rises and the red edge shows, release and

Handicap Bar

Stainless steel grab bar, satin finish, straight, 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 18, 24, 36, 42, 48, 52 inches. Available with non slip peened surface.

Handicap Corner Bar

Stainless steel grab bar, satin finish, straight bar with one straight end and one curved end to attach at corner of wall. 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mounts. Lengths: 24, 30, 36, 42, 48, 52 inches. Available with peened non slip surface.

Handicapped Model Shower Cabinet.

Shower cabinet is 40 inches wide, 40 inches deep and 82 inches high. It is finished in either baked enamel or stainless steel, and features double wall construction and fibercore insulation. The pressure balanced shower valve is equipped with separate adjustable temperature limit stops. The unit also features a hand-held shower head with swivel fitting , 69 inch flexible brass hose, stainless steel curtain rod and approved curtain, a folding shower seat with a stainless steel frame, and one hori

Handicapped Shower

The Handicapped Shower is a roll-in shower designed for use by individuals who use wheelchairs. This wheelchair-accessible shower has a molded, removable incline ramp that clips into the shower base, and a removable rubber threshold that folds down when a wheelchair crosses over it, then pops up again to hold the water inside the shower. Other features include a built-in, wall-mounted, padded fold-up seat with a heavy-duty stainless steel frame; a single-handle water faucet with an anti-scald va

Handrail (Models Rt130, Rt131, Rt136, & Rt138)

The Handrail is a shower wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. All models include a vertical bar and an angled horizontal bar, and are designed to be installed in the corner of a shower stall. COLORS: White, red, dark blue, gray, or turquoise.

Hands-Free Faucet Controller

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with upper extremity disabilities to operate a faucet. The faucet controller attached to a shower head will convert any faucet to hands-free operation. The foot controls both water frow and temperature. This easy to install assistive device offers temperature memory, scald protection, hand sanitation and saves water and energy. For more detailed information, contact the originator. TITLE: The Hands-Free Faucet Controller. WEB SITE: Worksh

Handshower And Faucet Fitting

Hand shower stores on bathtub faucet unit, knob type handles. Models for wall or deck mount.

Handshower On Adjustable Bar.

Variety of hand showers with flexible hose: standard, swivel base, massage. Adjustable bar or hook type wall attachment, tub spout or shower head adapters.

Handshower On Adjustable Bar.

Hand shower attaches to vertical bar on wall for sliding height adjustment as wall shower. Spout adapter available to allow use of standard shower head for others.

Handshower With Flexible Hose

Flexible hose with hand shower for attachment to standard shower head. Tub spout adapter available.

Handshower With Flexible Hose

The Handshower with Flexible Hose is an attachment for standard shower heads. A tub spout adapter is available.

Haven Walk-In Bathtub

The Haven Walk-In Bathtub is a walk-in tub designed to be accessible to individuals with arthritis of the upper or lower extremities. The tub has a broad, low-level entry with an inward-swinging door. Water levels for bathing are twice as deep as a traditional tub, with wider and longer bath dimensions, and more room to soak in soothing, temperature-controlled hot water. The tub has a contoured, slip-resistant seat and backrest, and a flexible, height adjustable shower wand with an adjustable sh

Heatguard Tmv3 Shower Valve (Model Dc153)

The Heatguard TMV3 Shower Valve, model DC153, is a a water temperature control valve designed to prevent scalding of individuals with cognitive or severe physical disabilities or Alzheimers disease. This shower valve contains a single-piece thermostatic cartridge with a temperature sensitive element that expands and contracts depending on the temperature of the water flowing past it. This changes the size of the openings through which the hot and cold water enter the shower, and balances the tem

Heavy Duty Bathtub Safety Rail (Model 69603A)

The Heavy Duty Bathtub Rail, model 69603A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity or mobility disability disabilities. Made of heavy-gauge, powder-coated steel, the grab bar provides two gripping surfaces to facilitate both entry and exit from tub. It attaches to a tub with extra-large suction cups. DIMENSIONS: Fits tubs with walls 3 to 7.25 inches thick. CAPACITY: 300 pounds. COLOR: White. WARRANTY: Lifetime limited warranty.

Heavy-Duty Plastic Fluted Grab Bars

The Heavy-Duty Plastic Fluted Grab Bars are grab bars designed for use by individuals with lower extremity, mobility, or balance disabilities or arthritis. These bariatric grab bars are reinforced with an aluminum tubular core for greater strength. The plastic fluted surface provides additional grip and provides assistance in preventing accidental slipping. DIMENSIONS: 12, 16, 18, 24, or 32 inches long x 1.25 inches in diameter. CAPACITY: 385 pounds. COLOR: White or blue.

Heavy-Duty Safety Tub Bar (Model 1609)

The Heavy-Duty Safety Tub Bar, model 1609, is a grab bar for bathtub designed to assist those who need extra support when using the tub. The bar is chrome-plated and has vinyl sleeves to prevent marring. A unique Lok-Fit design assures support. DIMENSIONS: 18 x 17 inches, bracket adjusts 4 to 7 1/2 inch width.

Heavy-Duty Safety Tub Bar (Models 1605, 1606, & 1607)

Heavy-Duty Safety Tub Bar, models 1605, 1606, 1607, is a grab bars for bathtub designed to make for safer entry and exit from the bathtub. The chrome-plated bars have vinyl sleeves to prevent marring and a unique Lok-Fit design to assure patient support. DIMENSIONS: 6 x 17 inches. 3 type of brackets available: for 3 to 4 1/2 inch width, for 4 to 7 1/2 inch width, for old style roll rim tubs.

Helping Hand Grab Bar, The

The Helping Hand Grab Bar is a grab bar for the toilet designed for use by individuals with arthritis or mobility or balance disabilities. This D-shaped bar mounts to the wall in front of the toilet. When needed it flips up, extends from the wall, and locks in place.When not in use, it flips down against the wall. DIMENSIONS: 16 or 24 inches. COLOR: White.

Hinged Arm Support, Set For Mounting At 45 Degrees, Fixed Arm Supports (Models 2601 & 2603)

The Hinged Arm Support, Set for Mounting at 45 Degrees, Fixed Arm Supports, Models 2601 & 2603, are wall grab bars for toilets designed for use by people with physical disabilities. The hinged units have single hand operation, lock in the upright position, and have an aluminum and nylon hinge point. The mounting set has a 45 degree angle for corner toilets. Both models are available in stainless steel. OPTIONS: An optional paper hook is available. DIMENSIONS: Wall mount dimensions are 11 x 4

Hinged Corner Shower Seat (Model 954) & Fixed Corner Shower Seat (Model 9541)

The Hinged Corner Shower Seat ##954 is a folding shower seat that is hinged on one wall, and folds down for use. The seat is made of 16 gauge stainless steel. Joints are 3/4 inch channel formed return edges, corners are Heliarc welded and ground smooth for maximum rigidity and safety, and it has a piano hinge. The support angle and the retaining clip are made of stainless steel. The Fixed Corner Shower Seat ##9541 has the same dimensions and specifications as the Hinged Corner Shower Seat, but d

Hockey Stick Bar (Model 832)

The Hockey Stick ##832 is a stainless steel wall mounted grab bar that can be used in bathtubs and showers, or next to toilets. The support is shaped in the form of a hockey stick with a longer vertical bar and a shorter horizontal bar that attaches to the wall in two places at the ends. The bar is bent at 97 degrees to create these two sides. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 8 inches with 1, 1.25, or 1.5

Horizontal Shower Bar With Vertical Arm (Model 2424-V)

The Horizontal Shower Bar with Vertical Arm ##2424-V is a stainless steel wall mounted grab bar. The support consists of a horizontal bar with an L- shape to fit the corner of the shower and a vertical bar for additional hold when entering or exiting the shower. The bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 24 x 24 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety wall clearance is 1.5 inches. FINISH: Brushed Satin is standard; optional finishes includ

Horizontal Tub Bar With Vertical Arm (Model 2040-V/vm)

The Horizontal Tub Bar with Vertical Arm is a stainless steel wall mounted grab bar for bathtubs. The support consists of a horizontal bar with an L- shape to fit to the corner of the side and back walls of the tub, and a vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 40 x 20 x 32 inches (##2040- V) or 24 x 48 x 32 (##2040-VM with center mounting) w

Hy-Gina Care Personal Portable Shower (Models 1000 & 2000)

Hy-Gina Care is a portable shower designed to enable caregivers and people with physical disabilities to perform personal bathing, hygiene, and shampooing tasks. Constructed of heavy-duty polyester resins and fiberglass compunds, this cabinet-style shower features side or front entry, an attached transfer seat with support legs, and a built-in hydro-powered seat with one-touch controls. Showering nozzles are placed to provide total body water coverage in a criss-cross pattern and a hand-held sha

Hygenique Bidet

The Hygenique Bidet is a toilet bidet for people with mobility or upper extremity disabilities. It consists of a cleansing wand that attaches to a nearby faucet with a 10-foot hose and a premium diverter faucet adapter. The wand can be used to wash the perineal area. When the door on the insert is closed, the sitz bath can fill. Twenty glycerin cleansing cartridges that fit inside the spray wand are included.

Hygenique Deluxe Whirlpool Sitz Bath / Bidet

The Hygenique Deluxe Whirlpool Sitz Bath/Bidet is a portable sitz bath and toilet bidet for people with mobility or upper extremity disabilities. It consists of a molded plastic insert that fits into standard toilet seat; a cleansing wand that attaches to a nearby faucet with a 10-foot hose; and a premium diverter faucet adapter. The insert has an opening that, when left open, allows the product to act as a bidet, gently washing the perineal area. When the door on the insert is closed, the sitz

Hygenique Standard Whirlpool Sitz Bath / Bidet

The Hygenique Standard Whirlpool Sitz Bath/Bidet is a portable sitz bath and toilet bidet for people with mobility or upper extremity disabilities. It consists of a molded plastic insert that fits into standard toilet seat; a cleansing wand that attaches to a nearby faucet with a 10-foot hose; and a diverter faucet adapter. The insert has an opening that, when left open, allows the product to act as a bidet, gently washing the perineal area. When the door on the insert is closed, the sitz bath c

Hygiene Refresher

The Hygiene Refresher is designed for individuals with limited upper body mobility or for persons who cannot twist at the waist. This product may also be used by individuals who find toilet tissue to be too rough on their skin, or for persons who cannot completely clean themselves after using the restroom, or for persons who prefer a bidet-style way of using the restroom. To use, the user fills bottle with water. Then, the user squeezes the bottle and water sprays out of the nozzle. Lightweight.

Idea Works Super Grip Suction Mount Handle

The Idea Works Super Grip Suction Mount Handle is a grab bar for bathtub designed for use by individuals with mobility or balance disabilities. Designed to assist in getting in and out of a bathtub, this device features two suction cups that secures the handle on the side of the tub or shower wall. Once the lever is released, the unit can be removed and made portable for travel. There are no tools required for mounting. CAPACITY: 156 pounds

Inclined Aid Rail (Model 2245)

The Inclined Aid Rail ##2245 is a stainless steel wall mounted grab bar for use in bathtubs and showers, or by toilets. This support is a straight bar that attaches to the wall at both ends. It is available with 4 concealed or 4 exposed mountings, and, when diamond shaped mountings are ordered, is available in right or left hand configurations. When mounted at a 45 degree angle with 22 5/8 inch centerline, this bar is designed to exactly hit building studs 16 inches apart. DIMENSIONS: 22 5/8 inc

Independence Line 1-Piece Transfer Shower

The Independence Line 1-Piece Transfer Shower, model MP3837BF, is an accessible shower stall designed for use by individuals with mobility or balance disabilities. This fiberglass-reinforced gelcoat shower has a built-in corner seat, grab bars, a flexible hose shower head, and a slip-resistant, textured floor with a center drain. OPTIONS: Dome (model IN38). DIMENSIONS (HxDxW): 78.25 x 38 x 38 inches. The unit has an ADA-compliant 2-inch threshold if it is installed in a 1.5-inch recess. COLOR: W

Individual Sitz Bath (Models 06-665-03 & 06-665-05)

Portable disposable sitz bath. Plastic basin with drain holes fits over toilet seat. Water bag with tubing attaches to basin. Deluxe (06-665- 03) and economy (06-665-05) models available.

Innovations Centered Bath Faucet (Models 547 & 547-Nn)

The Innovations Centerset Bath Faucet, models 547 and 547-NN, is an electronic faucet designed for use by individuals with fine motor, grasping, or neurological disabilities. An electronic sensor starts the flow of water when hands are placed under the faucet. The faucet has a temperature control handle with a high-temperature limit stop to prevent rotation into dangerously hot zones. Six interchangeable handles are included in different colors to match the bathroom decor. The faucet fits 3-hole

Inside Corner Grab Bar

Stainless steel corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount. 20 by 40 inches.

Inspire Walk-In Shower

The Inspire Walk-In Shower is an accessible roll in shower stall designed for use by individuals with mobility disabilities, including wheelchair users and individuals with arthritis. The shower entrance has bi-fold shower doors that open a full 180 degrees to provide barrier-free access across the entire width of the shower. The shower doors are comprised of a single full height tempered glass panel coupled with two half-height panels. All panels feature tempered raindrop patterns. This accessi

Invacare Knurled Chrome Grab Bar (Models 512-3, 516-3, 518-3, 524-3. & 532-3)

The Invacare Knurled Chrome Grab Bar is a bathroom wall grab bar designed for use by individuals with balance or mobility disabilities. This grab bar is made of chrome-plated steel with a knurled surface. It mounts at a variety of angles to a wall's structural supports. Rubber gaskets protect the wall surface. DIMENSIONS: 1 inch diameter with length of 12 inches (model 512-3), 16 inches (model 516-3), 18 inches (model 518-3), 24 inches (model 524-3), or 32 inches (model 532-3). Wall clearance is

Invacare Molded Tub Bar (Model 710-4)

The Invacare Molded Tub Bar, model 710-4, is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities or arthritis. Made of molded plastic, this unit attaches to the wall of the bathtub to provide two gripping surfaces. The upper gripping surface helps the user to enter the tub, and the lower gripping surface assists the user in lowering into or rising from a seated position in the tub. The unit has an adjustable locking mechanism for attaching to the wall of

Invacare White Grab Bar (Models 312-3, 316-3, 318-3, 324-3, & 332-3)

The Invacare White Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities in bathrooms. The grab bar is made of steel with a vinyl coating. DIMENSIONS: 1 inch diameter with length of 12 inches (model 312-3), 16 inches (model 316-3), 18 inches (model 318-3), 24 inches (model 324-3), or 32 inches (model 332-3). Wall clearance is 3.75 inches. CAPACITY: 250 pounds. WEIGHT: 1 pound (312-3), 1 pound 4 ounces (316-3), 1 pound 8 ounces (318-3), 1 pound 12 ounce

Inverted T Grab Bar

The Inverted T Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It has one vertical bar perpendicular to a horizontal bar. The bars attach to the wall at four points. OPTIONS: Slide hook. DIMENSIONS (HxW): 24 x 32 or 32 x 24 inches. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oil-rub

Invisia Accent Bar

The Invisia Accent Bar is a decorative grab bar, that allows one to disguise its purpose. The bar can hold up to 500 pounds and can be installed vertically, horizontally, or angled. Choose from chrome, bronze or stainless steel.

Invisia Accent Ring

The Invisia Accent Ring is a curved wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This stainless steel bar forms a three-quarter circle and is contoured to fit around circular shower and bathtub control fixtures. This unit has concealed mounting screws and multiple points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome

Invisia Bath Bench

The Invisia Bath Bench is a sturdy seat/table for a bath tub. The product is designed to keep bath bench use discreet, while providing a decorative accessory. The bench is made from Brazilian walnut which is naturally resistant to moisture, mildew and decay. Choose either a powder bronze or power grey side frame.

Invisia Corner Shelf

The Invisia Corner Shelf is a corner shelf for shower with wall grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. This unit comprises a triangular Dupont Corian shelf with a curved stainless steel grab bar in front. This unit has concealed mounting screws and two points of contact with the wall. CAPACITY: 350 pounds. COLOR: Brushed nickel or triple-plated chrome.

Invisia Serenaseat

The Invisia SerenaSeat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. This seat has a Brazilian walnut seat and back and an aluminum frame. Brazilian Walnut is naturally resistant to moisture, mildew and decay. The removable backrest conceals the screws of the mounting brackets. The seat folds up when not in use. DIMENSIONS: Folded, the seat has a 3-inch profile. Open, the seat is 18 x 15 x 15 inches. The mounting br

Invisia Shampoo Shelf

The Invisia Shampoo Shelf is a dual product, that stores shampoos, soaps, and other shower items, while discreetly providing support as a grab bar. The Shampoo Shelf can hold up to 500 pounds and includes a solid surface tray that resists the growth of mold and bacteria.

Invisia Towel Bar With Integrated Safety Rail / Grab Bar

The Invisia Towel Bar with Integrated Grab Bar/Safety Rail is a towel bar with grab bar designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of stainless steel, this unit comprises a towel bar suspended below a curved grab bar. For maximum support, these bars have three points of contact with the wall. DIMENSIONS: 16 or 24 inches long. CAPACITY: 350 pounds. COLOR: White powdercoat, brushed nickel, or triple-plated chrome.

Izi-Flow

IZI-flow is a hands-free faucet control designed to allow individuals with fine motor, grasping, or upper extremity disabilities to control a faucet. The IZI-flow is a mechanical valve that is connected to the faucet's water input(s) under the sink and controlled by a mechanical foot pedal (included). The flow speed and temperature are still set using the faucet's handle(s) or knob(s). The user turns on the faucet by depressing the foot pedal and turns it off by releasing the pedal. The IZI-flow

Jetta Jr

The Jetta Jr. is a hydrotherapy unit designed to provide whirpool benefits to the feet and lower limbs. Therapeutic uses of hydrotherapy include, but are not limited to, pain relief, increasing circulation, softening of scar tissue, postoperative rehabilitation, arthritis relief, and the reduction of inflammation or tissue swelling. The unit features 14 hydrotherapy jets, dual silent air controls, a ground fault interrupter, and a handle and casters to enhance portability. It may be used ind

Kids Porta-Shower Set (Models Psr40-91, Psr40-93 & Psr40-96)

The Kids Porta-Shower Set is a portable handshower with flexible hose and faucet fitting, designed for use by individuals with spinal cord injury or mobility or balance disabilities. This shower set comes with an adapter that connects to most standard faucets and disconnects for portability. DIMENSIONS: The Hose is 60 inches long and the hand shower unit is 9.75 inches long. COLOR: White with decorative picture of fish (model PSR40-91), a seal (model PSR40-93), or an elephant (model PSR40-96).

Kohler Baths And Whirlpools

Kohler Baths and Whirlpools are bathtubs and whirlpool bathtubs designed for use by people with physical disabilities. The manufacturer offers 16 models, 13 of which are available in standard or whirlpool bathtub models. The Guardian, Repartee, and Mendota models are available only as standard bathtubs; and the Hourglass 30 is available only in a whirlpool version. COLOR: A choice of colors is available.

Kohler Countertops

Kohler Countertops are accessible vanities designed for use by people with disabilities. Countertops are available in 22 models, and are constructed either of vitreous china or Kohler cast iron. DIMENSIONS: Faucet drillings are 4, 8, or 12 inches; lengths range from 18 to 37 1/8 inches and widths range from 14 to 21.75 inches; basin depths range from 4.5 to 7 inches; minimum rim height installed is 34 inches. COLOR: A choice of colors is available.

Kohler Faucets

Kohler Faucets are lever tap handle faucets designed for use by people with physical disabilities. The manufacturer offers 11 models, most for use in a variety of situations, including kitchen, lavatory, bath, and shower. Three models are also available with wristblade handles.

Kohler Flush-Valve Toilets

Kohler Flush-Valve Toilets are tall toilets designed for use by people with disabilities. Available models include the Highcliff Water-Guard, Highcliff Lite, Highcrest Water-Guard, Kingston Water-Guard, and Kingston Lite. All models have an elongated bowl style. Both Highcliff models and the Highcrest Water-Guard are floor-mounted with floor outlets; the Kingston Models are wall-mounted with wall outlets. OPTIONS: Bedpan lugs are available on all models. DIMENSIONS: Lengths range from 25 5/8 to

Kohler Freewill Barrier-Free Bath And Shower Module (Models K-12103 & K-12104)

The Kohler Freewill Barrier-Free Bath and Shower Module, models K-12103 and K-12104, is a shower bathtub designed for use by people with physical disabilities. The unit includes slip-resistant floors, and a lift-out transfer seat. It is available with either a left or right side drain. The module is made of acrylic and comes with grab bars made of either brushed stainless steel, polished stainless steel, or nylon. COLOR: White, almond, sunlight yellow, ice grey, biscuit, cashmere, sandbar, or te

Kohler Tank-Style Toilets

Kohler Tank-Style Toilets are tall toilets designed for use by people with disabilities. Models include the Highline Water-Guard, Highline Lite PC, Northline Water-Guard, Wellesly Water-Guard, and Barrington Water-Guard. All models use an elongated bowl style. The Wellesley Water-Guard is a wall-mounted, wall-outlet model; all others are floor mounted with a floor outlet. OPTIONS: Most models have tank locks, bedpan lugs and an Insuliner tank lining available. The Insuliner is included with the

Kohler Touchless Electronic Faucet (Models K-10950-4 & K-10951-4)

The Kohler Touchless Electronic Faucet, models K-10950-4 and K-10951-4, is an electronic faucet designed for use by people with physical disabilities. This brass faucet for single-hole mounting has a TriPoint electronic infrared sensor that activates the unit when a hand is placed beneath it. A mixer handle allows the user to adjust the water temperature. The flow rate is 0.5 gallons per minute. A flexible hose and stainless steel mounting hardware are included for installation. OPTIONS: Aerator

Kurled Grab Bars

Kurled Grab Bars, model 22120, are wall grab bars designed for use by individuals with balance or mobility disabilities. Grab bars have a kurled finish and are made of heavy-wall chrome-plated steel tubing. Mounting hardware is included. DIMENSIONS: Available lengths are 12, 16, 18, 24, or 32 inches. Diameter is 1 inch.

Ladder To Assist Getting Out Of Bath

CUSTOM ADAPTATION PURPOSE: To provide a customized bracket and ladder system for use in getting in and out of the bath unaided for a person with mobility disabilities. A bracket is mounted on a stainless steel plate, and a fixed stainless steel tube is welded onto the plate. A smaller diameter inner tube with a 500 millimeter (mm) long piece of tube is welded at 90 degrees, creating an L-shape that sits in the outer tube and rotates from flush against the wall to 90 degrees from the wall. Hangi

Laguna Walk-In Bathtub

The Laguna Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This extra-large walk in tub has a wide door with left or right hinges, a low doorway entry level, a contoured seat and back rest, and thermostatically controlled water temperature. OPTIONS: Lever, cross head, or contemporary style faucets; bathtub hand grips; hydrotherapy spa system; shower option; and shower canopy for the hanging of shower curtains. DIMENSION

Lavatory Mounted All Purpose Soap Dispenser (Model 0332)

The Lavatory Mounted All Purpose Soap Dispenser, model 0332, is a pump-top soap dispenser designed for use by individuals with grasping or fine motor disabilities. The unit's corrosion-resistant valve dispenses viscous lotion soaps and synthetic detergents. Polyethylene globe fills from the top and holds 20 or 34 fluid ounces. The free turning spout and stem are stainless steel with bright finish. The escutcheon is chrome-plated brass. The adjustable threaded shank allows for installation in cou

LED Faucet Light

LED Faucet Light is designed for use by individuals who have difficulty assessing the water temperature as a result of a nerve injury, cognitive, or intellectual disabilities. The color changes color according to the temperature.

Lever Faucet Handle.

Wide selection of single and two handle lever water mixers for bathroom and kitchen.

Liberty Assist Grab Bars (500 Series)

Liberty Assist Grab Bars, 500 series, are grab bars designed for use by individuals with balance or mobility disabilities. Bars are straight and made of chrome plated brass, polished brass, or polished stainless steel. DIMENSIONS: 9, 12, 16, 18, 24, 30, 32, or 36 inches long. COLOR: Brass, chrome, stainless steel, or white.

Liberty Walk In Tub (Model Xtw5026)

The Liberty Walk In Tub, model XTW5026, is a walk in bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This single-piece fiberglass bathtub has a side door and a polyester gelcoat finish, and is available with a right- or left-hand drain. Other features include waste/overflow, safety assist bar, standard valve, tub filler, and hand shower package. OPTIONS: Jetted version with water and air jets; deck extension and curtain and rod. DIMENSIONS (HxDxW)

Liteshower Recliner Model

The LiteShower Recliner Model is a portable accessible shower stall designed for use by individuals with mobility or severe physical disabilities. The unit consists of a shower tray with collapsible walls to facilitate roll-in access; a folding screen and curtains that close around the sides; a handheld showerhead on a 7-foot hose that connects to a faucet; and a pump for draining the tray after the shower. The tray is placed on the floor near a faucet and a sink or toilet. The user reclines on

Liteshower Shower-In-Bed Model

The LiteShower Shower-in-Bed Model is a bed shower designed for use by individuals with mobility or severe physical disabilities. It allows a person to remain in bed during a shower. The unit includes a shower tray with collapsible walls for easy access, which is placed on top of the bed; a handheld shower head with a 7-foot hose that connects to a shower or faucet; and a waste water disposal pump. The user showers with a handshower connected to a faucet. After the shower, an electric pump drai

Liteshower Standard Model

The LiteShower Standard Model is a portable shower stall that is accessible to wheelchair users and other individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The unit's shower tray is placed on the floor,

Liteshower Tall Model

LiteShower Tall Model is a portable accessible shower stall designed for use by individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The user stands to shower in this portable stall, which also can be ente

Lombard Bathtub Handrail

Stainless steel straight grab bar, 1 1/4 inch diameter. Adjusts and locks to desired length, no screws. For installation in 3 wall tub alcove with tile walls. 54 or 56 inches long.

Long Tub Assist Bar

The Long Tub Assist Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Made of heavy-duty plastic, this bar adheres to the tub or wall using the large suction cup at each end. The bar can be used horizontally or vertically. Flip tabs release the bar for repositioning. DIMENSIONS: 16.5 inches long. The suction cups are 4 inches in diameter. COLOR: White with green tabs.

Low-Rise Walk-In Bathtub (Models 6032, 6032-S, & 6042)

The Low-Rise Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Models 6032 and 6042 are available with or without a bench-style seat; model 6032-S has a sloping back wall with integral arm rests and no seat. Model 6042 is wider to accommodate larger users. All tubs have a slip-resistant floor and seat (where applicable). The tub is made from stainless steel, vacuum-formed high gloss acrylic, and fiberglass, and is

Ls400 Toilet Lift

The LS400 Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom with its ergonomic rear push bar for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS400 can be configured as a height-adjustable toilet

Lubidet

Lubidet is a personal hygiene system for men, women, and children. This add-on toilet bidet is designed to deliver instantly warmed fresh water for cleansing and either warmed or unheated air for drying. The device provides a hands-free wash with fresh water only; there are no added chemicals in the water wash. The device is installed between the toilet seat and the bowl for either right or left hand operation. The heating unit hangs on the wall. The control unit swivels the spray arm into posit

Lumex Adjustable Height Versaframe Toilet Safety Rail (Model 6460A)

The Lumex Adjustable Height Versaframe Toilet Safety Rail, model 6460A, is an adjustable height toilet frame designed for use by individuals with mobility disabilities. The contoured waterfall armrests provide a comfortable gripping surface. The anodized aluminum frame secures to most toilets. OPTIONS: Rails for safety frame (6460R). DIMENSIONS: Arm height adjusts from 28 to 32 inches. Arm width adjusts from 18 to 21 inches. CAPACITY: 250 pounds. WARRANTY: Lifetime limited warranty.

Lumex Chrome Grab Bars (Models 2012A, 2016A, 2018A, 2019A & 2021A)

Lumex Chrome Grab Bars, models 2012A, 2016A, 2018A, 2019A and 2021A, are wall mounted grab bars designed for use by individuals with balance or mobility disabilities. Made of durable chrome plated steel with knurling to provide a good gripping surface, the bars can be mounted vertically, horizontally, or diagonally 1.5 inches from the wall. The bars are straight. DIMENSIONS: Length is 12 inches (2012A), 16 inches (2016A), 18 inches (2018A), 24 inches (2019A), or 32 inches (2021A). CAPACITY: 250

Lumex Versaguard Coated Grab Bars (Models 40033A, 40133A, 40233A & 40333A)

The Lumex VersaGuard Coated Grab Bar, models 40033A, 40133A, 40233A and 40333A, is a wall-mounted grab bar designed for use in showers and bathtubs to assist persons with balance or mobility disabilities. This straight bar is made from heavy duty steel with a rust resistant enamel coating. The bars can be mounted vertically, horizontally or diagonally, and when mounted, is 1.5 inches from the wall. DIMENSIONS: 12, 16, 18, 24 or 32 inches. CAPACITY: 250 pounds. WARRANTY: Lifetime limited warranty

Lynx Ergoheight 17-Inch High Elongated Toilet (Model 21-618)

The Lynx ErgoHeight 17-Inch High Elongated Toilet, model 21-618, is a tall toilet designed for use by individuals with mobility disabilities. This 1.6 gallons per flush (gpf) toilet has an elongated bowl; front jet flusing action; gravity-fed flush; a fully glazed trapway; a reverse trap; a color-matched tank lever located on the front; and two bolt caps. DIMENSIONS (HxDxW): 31 7/8 x 27.75 x 19 1/8 inches. Rim height is 17 inches; rim to water surface is 6.25 inches; water seal is 2 1/8 inches.

Maax Velvet Whirlpool Tub (Model 6636)

The Maax Velvet Whirlpool Bathtub, model 6636, is a whirlpool bath designed for use by individuals with arthritis. The tub is made of acrylic material which is warm to the touch and has built-in armrests and an ergonomic headrest. A headrest channel allows water to drain. The spacious interior has a textured bottom. The tub is designed for alcove or drop-in installation. OPTIONS: Available massage systems include Backmax, Bubble Tub, Hydrosens, Combined Hydrosens and Bubble Tub, or Whirlpool 10

Magic Basin

The Magic Basin is a an accessible sink with a hands-free electronic faucet designed for use by individuals with fine motor or upper extremity disabilities. Sensors in the basin's tap fittings detect the position of hands in the basin and control the water flow and temperature accordingly. In the factory setting, designed for use in public areas, placing hands in the middle of the basin activates the faucet and produces a warm water flow. The faucet is deactivated by removing hands from the wate

Magic Faucet

The Magic Faucet is an electronic faucet designed for use by individuals with fine motor, grasping, or upper extremity disabilities. This faucet allows an individual with limited use of the hands to control water flow and temperature by touching the tap fitting or by moving the hand into the vicinity of the outlet (a distance of approximately two centimeters). The flow of water is ended by removing hands or by moving the hands or fingers through the flow of water. The faucet comes with 10 progra

Marsh Handicap Furniture

Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.

Maxwell Extended Height Ada Compliant Gravity Fed Toilet (Model 21-418)

The Maxwell Extended Height ADA Compliant Gravity Fed Toilet, model 21-418, is a tall toilet designed for use by individuals with mobility disabilities. This high, elongated toilet has a Maxwell flushing platform, water consumption of 1.6 gallons per flush, siphon-jet flush action, and a glazed trapway. The seat is not included. DIMENSIONS (HxDxW): 31.5 x 29 x 18.5 inches. The rim height is 17 inches and the rough in (the distance between the center of the waste drain and the wall) is 12 inches.

Melrose Single Handle Kitchen Faucet With Pull-Out Spout (Model D456513)

The Melrose Single Handle Pull-Out Kitchen Faucet, model D456513, is a single lever faucet designed for use by individuals with upper extremity, fine motor, or grasping disabilities. The unit features a single lever handle with a two-function pull-out spout (spray and aerated stream), and comes with a matching brass soap/lotion dispenser. DIMENSIONS: The unit fits 1 3/8 to 1.5 inch diameter mounting hole. WARRANTY: Limited lifetime warranty for manufacturing defects.

Melrose Wristblade Handle Laundry Faucet (Model D100353)

The Melrose Wristblade Handle Laundry Faucet, model D100353, is a faucet with lever-style handles designed for use by individuals with upper extremity, fine motor, or grasping disabilities. The faucet includes a low-rise tubular spout with aerator, left and right blade handles, a hose end adapter, and a ceramic disc valve. DIMENSIONS: Unit width from the end of the left handle to the end of the right handle is 10 5/8 inches. The spout is 8.5 inches long. WARRANTY: Limited lifetime warranty for m

Metering Faucet (Model 90 - 75)

Metering faucet, push button requires 3 pounds of pressure for operation. Self closing, remains open at least 10 seconds. For bathroom lavatory.

Mobile Power Toilet Aid

The Mobile Power Toilet Aid is an elevated toilet seat and lift combination and caster commode designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with locking casters, arm rests, a padded backrest, and an electric lift that raises the toilet seat (not included) up to 13 inches above the toilet. A single button controls up and down movement and the unit

Mobility Handicapped Tub

The Mobility Handicapped Tub is an accessible bathtub designed for use by wheelchair users. This walk-in tub has an extra-wide outward-opening door to allow wheelchair access, and a high seat to facilitate tranfers. Other features include a lever-style door handles; two aluminum grab bars mounted on the bathtub interior; and adjustable stainless steel leveling legs. The tub is available with right- or left-mounted doors. OPTIONS: Variable speed 12-jet hydrotherapy spa with hot temperature mainta

Moen Designer Elegance Securemount Grab Bar

Moen Designer Elegance SecureMount Grab Bars are wall grab bars designed for use by individuals with balance, lower extremity, neurological, or mobility disabilities or arthritis. The patented SecureMount system allows these grab bars to be installed in wall studs at any angle, and using the optional SecureMount Anchors allows the bars to be installed anywhere on the wall without using the studs. These stainless steel bars have concealed screws and grip pads for added security. OPTIONS: Pair of

Moen Grab Bar Shower Holder

The Moen Grab Bar Shower Holder is a holder for handshower designed for use by individuals with lower extremity, balance, mobility, upper extremity, or severe physical disabilities or severe spinal cord injury. This unit attaches to most vertical, horizontal, or diagonal grab bars without tools and accommodates most handshowers. DIMENSIONS: Fits grab bars 1.25 to 1.5 inches in diameter. WARRANTY: Limited lifetime warranty.

Moen Handshower With Slide Bar (Models 3867 & 3887)

The Moen Handshower with Slide Bar, models 3867 and 3887, is a handshower on a height adjustable bar. The handshower includes a flexible hose, an adjustable slide bar, and a vacuum breaker. Model 3887 has a one-function full spray. Model 3867 has a four-function full spray with massaging rinse. DIMENSIONS: Slide bar is 30 inches long. Hose is 69 inches long. COLOR: Chrome, brushed bronze, brushed nickel, polished brass, oil rubbed bronze, platinum, or satine finish. WARRANTY: Limited lifetime wa

Moen L-Shape Peened Grab Bar (Models 8992, 8994, & 8996)

The Moen L-Shape Peened Grab Bar, models 8992, 8994 and 8996, is a grab bar designed for use by individuals with balance or mobility disabilities. The finish is peened to improve grip. The rods are formed from 18-gauge, type 304 stainless steel tubing with a satin finish. It has a concealed screw mounting. DIMENSIONS (LxD): 16 x 32 inches (8992); 24 x 36 inches (8994); or 24 x 48 inches (8996). Diameter is 1.5 inches. CAPACITY: 500 pounds. WARRANTY: Limited lifetime warranty.

Moen Pause Control Handheld Shower

The Moen Pause Control Handheld Shower is a handshower with flexible hose designed for use by individuals with mobility, balance, neurological, or severe physical disabilities or spinal cord injury. This handshower offers four settings: shower, pulsating, massage, and pause. The pause feature enables the user to pause the water flow with the touch of a button. The unit also has an easy-to-turn, over-sized spray control. This lightweight unit has a soft-grip handle with safety strap for a secure

Moen Securelock Tub Grip (Model Dn7175)

The Moen SecureLock Tub Grip, model DN7175, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This portable unit fits over most tubs and locks with the Securelock mechanism. The tub walls are protected by non-skid pads. The circular handle/grab area is textured for a secure grip. DIMENSIONS: The unit fits tub walls 2.75 to 5.5 inches thick. The grip height is 12 inches. CAPACITY: 350 pounds. WEIGHT: 6 pounds. WARRANTY: Limited life

Moen Suction Balance Assist Bar

The Moen Suction Balance Assist Bar is a wall grab bar designed for use by individuals with balance disabilities. This portable bar has a non-slip grip and attaches to smooth, flat surfaces with the large suction cup at each end. Locking mechanisms secure the bar to the wall once placed with the suction cups. Releasing the locks releases the bar from the wall. DIMENSIONS: 12 inches long. COLOR: Cool white.

Monitor.

Valve for showerhead or tub spout. Volume and temperature setting operate independently. High temperature limit stop standard on all units. Pressure balance operation.

Mullen Shower Base Bathtub Replacement

Mullen Shower bases are roll-in showers designed for use by individuals who use wheelchairs or who have walking or lower extremity disabilities. These bases can be installed with vinyl or tile floors and feature a clamping system on two access sides that secures the base to the vinyl floor covering or the tile floor adapter to prevent leakage. Built-in tile upstands on the other two sides contribute to the integrity of the water seals. The ribbed underside enables the unit to key into the floori

Multi-Level Hand Grip (Model F72481)

The Multi-Level Hand Grip, model F72481, is a wall grab bar designed to provide support for persons in bathing situations or for getting up or sitting down on the toilet. The grip can be mounted at any level and forms a curved L which protrudes from the wall. The unit is made of molded unbreakable polypropylene with grooved inner surfaces for a non-slip grasp. Three models of the grip are available: a single level (H72481-0001) which attaches to the wall at both ends; a double level (model H7248

Neptune Toilet Lift

The Neptune Toilet Lift, also called Solo Toilet Lift, is a powered elevating toilet seat lift designed for use by individuals with lower extremity or mobility disabilities or arthritis. This switch-operated unit gently lowers and raises the user on and off the toilet in a way that mimics the natural body motion. It comes with arms which can be raised to facilitate side transfer. The controls are built into either the left or right arm. The feet have locking cups that with antislip pads. POWER:

Non-Peel Flanged Grab Rail (Model 117)

The Non-Peel Flanged Grab Rail, model 117, is a grab bar designed for use by individuals with balance or mobility disabilities. This grab bar has flanged ends with mounting holes. DIMENSIONS: Available in 12, 15,18, 24, or 28 inches long with a 2.75-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.

Non-Peel Flat End Grab Rail (Model 115)

The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. DIMENSIONS: Available in 18, 24, or 28 inches long with a 2-inch hand clearance. The rail is 1-inch in diameter. COLOR: White plastic non-peel coating.

Non-Peel Offset Grab Rail (Model 114)

The Non-Peel Offset Grab Rail, model 114, is a grab bar designed for use by individuals with balance or mobility disabilities. This steel grab bar is angled at 45 degrees and is designed for applications where hand access is difficult such as door jambs. DIMENSIONS: Available in 18 or 28 inches long with a 2-inch hand clearance. COLOR: White plastic non-peel coating.

Oasis Walk In Bathtub

The Oasis Walk-In Bathtub is an accessible walk in bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. The Oasis is a full-depth, walk-in bathtub that features a side-opening door with a sturdy locking mechanism, an integral molded bath seat, temperature controlled hot water, and an anti-slip base. It is available with either a left- or right-hand door. Premier Bathrooms OPTIONS: Shower canopy allowing the tub to be used as a shower cubical; lever,

Off-The-Pot

Off-the-Pot is a floor- or wall-mounted grab bar designed to assist with bathroom mobility for individuals with balance, neurological, lower extremity, or mobility disabilities or arthritis or spinal cord injury. The unit can assist with transfers to and from a wheelchair or walker, seated balance, and balance upon standing. This device can be positioned on the right- or left- hand side of the toilet, beside the bathtub, or between the tub and toilet, and mounts to the floor or wall. Features in

Option E Shower Door

The Option E Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option E doors are for use with showers located in a corner with two walls and two sides open with a threshold to contain water. DIMENSION

Option Ew Shower Doors

The Option EW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option EW doors are for use with showers located in a corner with two walls and two sides open with no threshold to contain water. The sy

Option N Shower Doors

The Option N Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option N doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.

Option Nw Shower Doors

The Option NW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option NW door system is for use with showers located in an alcove with walls on three sides and one side open with no threshold to conta

Option T Shower Doors

The Option T Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option T doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.

Option Tw Shower Doors

The Option TW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option TW door system is for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain

Outlook Series Ada Compliant Shower (Models Bfs-36F, Bfs-48F, Bfs-6036F, & Bfs-60F)

The Outlook Series ADA Compliant Shower is a roll-in shower designed for use by individuals who use wheelchairs. This unit comes as a base model with a choice of Americans with Disabilities Act-compliant options. The integrated fiberglass base has an interior and exterior half-beveled edge, front flange, and wheelchair-accessible threshold. OPTIONS: Straight grab bar with textured finish; curtain rod with plastic end caps; chrome fixtures; solid brass drain; large L-shaped or rectangular seat. D

Outlook Series Barrier Free Tub Shower (Model Bfts-60F)

The Outlook Series Barrier Free Tub Shower, model BFTS-60F, is a shower bathtub designed for use by individuals with mobility disabilities. The two-piece tub shower base has a textured bottom with a left- or right-hand drain. The maximum water capacity of the tub is 39.6 gallons. OPTIONS: Homestead whirlpool system with air switch; Naugahyde or Phenolic rectangular fold-up or drop-in seat; straight grab bar; curtain rod with plastic end caps; and vinyl shower curtain with stainless steel hooks.

Outside Corner Grab Bar

Stainless steel outside corner grab bar. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Exposed or concealed mount. Satin finish. 34 by 18 1/2 inches.

P.t. Rail

The P.T. Rail is a wall grab bar for toilet designed for use by individuals with balance, neurological, or mobility disabilities. This P-shaped unit provides rigid support and features dual offset rails to reduce wrist strain when using the lower rail. This rail is available for right or left side mouting in a fixed model or in a hinged model that folds out of the way when not in use. The hinge holds the rail in whatever position it is placed. OPTIONS: Toilet tissue roll holder and floor mast fo

Padded Folding Shower Bench (Model Apm4210P)

The Padded Folding Shower Bench is a wall- mounted folding shower seat designed for use by individuals with balance, mobility, neurological, or lower extremity disabilities. This shower seat is hinged on the wall and folds down for use. Features include two stainless steel tubular legs for support and a wide, padded seat. DIMENSIONS: The seat is 23 inches wide and the minimum base width is 32.25 inches CAPACITY: 558 pounds. COLOR: Grey.

Plastic Tub Grab Bar With Handle (Model 8222)

The Plastic Tub Grab Bar with Handle, model 8222, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This tub grab bar has a blow-molded handle and an anti-skid clamp. DIMENSIONS: The clamp adjusts to fit bathtub sides from 3.5 to 6.5 inches. COLOR: Red handle with white clamps.

Ponte Giulio Pur Folding Rail

The Ponte Giulio PUR Folding Rail is a wall grab bar for toilet or shower designed for use by individuals with balance, lower extremity, or mobility disabilities. This steel bar folds up against the wall when not in use and has a padded, non-slip surface. The concealed mounting flange is equipped with a multiple hole design for a variety of mounting options. OPTIONS: Hollow wall SNAPTOGGLE mounting kit. DIMENSIONS (LxW): The mounting plate is 9 1/16 x 5 7/8 inches. The overall length is 30 inche

Ponte Giulio Trendy Grab Bar

The Ponte Giulio Trendy Grab Bar is a wall grab bar designed for use by individuals with balance, neurological, or mobility disabilities or lower extremity arthritis. These aluminum bars have a non-slip ABS plastic coating that gives the bar the appearance of wenge wood. The concealed mounting flange has an eleven-hole design for a variety of mounting options. OPTIONS: SNAPTOGGLE mounting kit. DIMENSIONS: Available in 16, 18,24, or 36 inches long. These bars are 1.25 inches in diameter and the d

Ponte Giulio Tubocolor Abs Folding Shower Seat

Ponte Giulio Tubocolor ABS Folding Shower Seat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. Made of ABS plastic, this seat has drainage slots and folds up against the wall when not in use. This seat also has an extended ABS base made of seamless zinc-plated steel pipe and coated with bio-compatible, warm-to-the-touch vinyl. DIMENSIONS (WxD): The seat is 13 x 12 5/8 inches. The unit is 16 15/16 x 16 15/16 inches ov

Portable Bidet

This Portable Bidet is designed for the elderly, disabled or those individuals who have a mobility disability that makes it challenging to neatly use the restroom. This small device attaches to a water bottle and produces a stream of water that can be focused to the desired wash area. Lightweight. Clean with soap and water. Made of plastic.

Portable Toilet Rails (Model 5475)

Adjustable height portable free standing toilet safety frame. No installation or attachment to toilet, fits closely around toilet. Waterfall armrests and rubber leg tips. Anodized aluminum tubing. Adjustable height 24 1/2 to 28 1/2 inches, width 20 1/2 inches, depth 18 inches. Weight 3 1/2 pounds.

Portascreen Shower Guard

This Portascreen shower guard is designed for caregivers of individuals with limited physical mobility as a result of a stroke, spinal cord injury or traumatic brain injury. It is designed to contain the water and keep the caregivers and surrounding environment dry.   The shower guard is designed to fold flat for storage or transport, and comes with a handy carry case. The hinges mean that the screen can be positioned in exactly the right place. It's an excellent solution to a common problem.

Potti Shower (Model 72628) & Tall-Ette Perineal Cleaner (Model F72629)

The Potti Shower Toilet Perineal Cleaner, model 72628, is a plastic spray device that attaches to the bottom of the toilet seat to provide cleansing water spray to the anal and genital area. The device can be swivelled out of the way when not in use. A flexible tube 12 feet long links the device to the bathroom sink faucet. A diverter valve with push button operation connects to the faucet but does not interfere with sink operation. The Tall-Ette Potti Shower Perineal Cleaner, model 72629, is th

Presidential Walk-In Bathtub

The Presidential Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This deep-soak walk-in tub has an infinite speed, hydrotherapy air spa system with twenty-four hydro-ports. Each hydro-port contains seven jets for a total of 168 warm jets to surround and massage the entire body. The tub is made from acrylic on the outside and steel-reinforced fiberglass on the inside, with a high gloss protective finish. Other fea

Pressalit Toilet Supports

Pressalit Toilet Supports are grab bars designed for providing additional support to individuals using the toilet. They are available in wall-mounted or free standing frame styles, with or without front support legs, and with or without height adjustability. The wall models fold up to the wall. OPTIONS: Front chest supports, back supports, back with side supports, and a toilet paper holder.

Prima Bath Step

The Prima Adjustable Height Bath Step is a bathtub access step designed for use by individuals with arthritis or other mobility or balance disabilities. This molded-plastic step with add-on risers reduces the distance from the floor to the top of the bathtub to aid individuals to step into the bathtub more easily. Jointing pieces can be attached at the side or front to make platforms. Moldings are slip-resistant. DIMENSIONS (HxLxW): Step is 2 x 18 x 14 inches. Risers are 1 inch each, and the ste

Pullout Sink

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation to use a sink in a small apartment bathroom for users of wheelchairs. This adaptation uses a small RV sink, flexible pressure hose and a set of drawer runners, to be able to bring the sink out from the wall. An RV sink is shallower than a typical sink and would need to be much higher than a lap. The RV sink has a 2-inch diameter drain. The 2-inch elbow needed for under the sink may be difficult to find, but may be found

Quality Tub Rail

The Quality Tub Rail is a grab bar for bathtubs designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. This grab bar provides a safe grip when getting in and out of the tub. DIMENSIONS: 12 or 16.5 inches high. The rail will fit tub walls from 2.75 to 6.5 inches wide.

Raised Toilet.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation to raise toilet instead of using a raised toilet seat. A wooden base is made to place between the toilet fixture and the floor. Extensions are needed for the pipes. The height can be custom designed but if the added height causes the user's feet to hang above the floor a foot support and be built into the base. Includes photographs. SKILLS REQUIRED: Woodworking. AUTHOR: George Washington TITLE: Raise the Toilet When It Gets Low REF: Journal

Recirculating Toilet & Electra Magic (Model 80)

Portable toilets. Sanitary, odorless. Models have waste holding tank capacity of 2.6 gallons, 4.3 gallons, or 5.5 gallons. Holding tank detaches for easy emptying. Some models have integral waste holding tank level indicator and position locking lid. Optional hold down brackets secure unit to floor. Toilets are 13 1/2 inches or 15 inches wide; 15 inches or 16 1/2 inches long; 12 inches, 13 inches, 14 5/8 inches, or 16 1/4 inches high. Electra Magic Model 80 is a recirculating portable toilet; pr

Reeded Grab Bar

The Reeded Grab Bar is a ridged wall-mounted grab bar disigned for use by individuals with balance or mobility disabilities or spinal cord injury. These bars have ridges to aid in grasping, and attach to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLORS: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin go

Refresh Walk-In Shower

The Refresh Walk-in Shower is a roll in shower stall with built-in grab bars and seat designed to be accessible to wheelchair users and individuals with lower extremity or mobility disabilities or spinal cord injury. This low-entry shower has bi-fold shower doors that open 180 degrees, providing barrier-free access across the width of the shower. The half-height folding doors have tempered raindrop pattern panels that cover the shower opening when closed yet provide full access to the shower whe

Replacement Shower Seat

CUSTOM ADAPTATION PURPOSE: To enable an individual with spina bifida to shower independently. An existing shower seat had been custom built and mounted to the side wall of the shower at a slight angle to promote damage. The unit had a wooden seat covered with plastic, but over time water had penetrated the wood, causing it to rot and eventually break. A new seat base was made from 12 millimeter high-density polyethylene with rounded corners. Glued to the base was a sheet of closed-cell foam to

Retractable Shower Seat (Models 703 & 703T)

Wall mounted stainless steel shower seat with tubular frame, 2 legs angle into wall for rigid support. When seat is retracted, legs fold against wall. Teakwood seats or Naugahyde covered foam cushion. Seat dimensions are 14 inches by 16 inches. Seat height is 19 inches.

Ribbed Grab Bar

The Ribbed Grab Bar is a wall grab bar designed for use in the bathtub or shower by individuals with balance or mobility disabilities. Constructed of durable ribbed plastic for a non-slip grip, the unit consists of a center bar, two end brackets with closure plugs, and mounting screws. The end caps can be removed to enable additional lengths to be added in a continuous straight line. DIMENSIONS: Available in 16 inches long to accommodate standard wall stud spacing or in 24 inches long. The wall

Right / Left Reversible Handrail (Models Rt124, Rt126, & Rt128)

The Right/Left Reversible Handrail is a wall grab bar designed for use in bathrooms by individuals with balance, lower extremity, or mobility disabilities. The hand rail has veritcal and horizontal bars, and is right/left reversible. DIMENSIONS (HxW): 762 x 475 millimeters (model RT124); 762 x 762 millimeters (model RT126); or 762 x 1200 millimeters (model RT128). COLORS: White, red, dark blue, gray, or turquoise.

Rohl Decorative Grab Bar (Models 1250 & 1252)

The Rohl Decorative Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. These solid brass grab bars have a country bath escutcheon design. Mounting hardware is included. DIMENSIONS: Model 1250 is 38.56 inches long with a center length of 36 inches. Model 1252 is 20.53 inches long with a center length of 18 inches. Both models extend 3.75 inches from the wall and have an escutcheon diameter of 2.56 inches. COLOR: Polished chrome, polished nickel, sat

Rohl Single-Function Handshower / Hose / Bar / Outlet (Models 1300 & 1301)

The Rohl Single-Function Handshower/Hose/Bar/ Outlet is a handshower with a flexible hose designed for use by individuals with mobility, lower extremity,or balance disabilities. Model 1300 is a package that includes a model 1100/8 porcelain handle handshower and a model 1200 shower bar with a porcelain cap cross handle. Model 1301 is a package that includes a model 1101/8 metal handle handshower and a model 1201 shower bar with metal cap cross handle. Both packages include a model 16295 hose and

Roll In Shower In Existing Tub Space.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides waterproof pan on floor with minimal lip to impede wheelchair or person walking. Modification procedure: 1) Remove existing bathtub. 2) Paint floor with a concrete adhesive. 3) Form wire cloth frame on floor and 4 inches up on side walls and attach to threshold. 4) Form studwall (36 inches) and 1 by 6 inch maple threshold 36 inches wide at the door. 5) Pour concrete patch base over wire cloth, shaping it for form and drainage considerations (4

Roth Mobeli Bath Tub Shortener (Models 14005206 & 14005207)

The Roth Mobeli Bath Tub Shortener is a bathtub shortener designed for use by individuals with short stature or lower extremity amputation. This unit can be placed at any point in the tub to provide foot support, or it can be turned horizontally to function as a tray. Model 14005206 has two suction plates and can fit all bathtub types. Model 14005207 has three adjustable clip-on suction plates and can only be used in parallel bathtubs. The suction plates arranaged with two plates above, which sw

Safe Hands Bathtub (Model Was-888)

The Safe Hands Bathtub, model WAS-888, is a walk-in bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This walk-in tub has a waterproof door, a seat, a retractable hand shower, and four adjustable water jets for hydrotherapy massage. The tub fits one adult, and is deep enough to allow the user's entire body to be submerged while sitting down. POWER: Uses 110/120 volts. OPTIONS: 8 water jets, add $499; heated blower with 20 air jets, add $999; custom colo

Safe Step Walk-In Shower

The Safe Step Walk-In Shower is an accessible shower stall with built-in seat and grab bar designed for use by individuals with balance, lower extremity or mobility disabilities. This shower has a 4-inch entry step and a built-in folding safety chair with armrests. Both the seat and armrests have extra thick pads. The Safe Step Walk-In Shower features a built-in vertical safety grab bar adjacent to the seat; extra thick, commercial grade anti-slip safety flooring; Delta dual showers, including a

Safe Step Walk-In Tub

The Safe Step Walk-In Tub is a walk-in bathtub and hydrotherapy bath designed for use by individuals with mobility, lower extremity or balance disabilities or arthritis. Designed to fit most bathrooms, this tub features a guaranteed leak-free design; a low-level entry; a wide access door with a No Strength Locking handle (right and left side available); anti-scald technology; a slip-resistant ComfortSeat and floor; bacteria- and mold-resistant sanitary gel-coat; built-in and wall mount safety ba

Safer Shower Experience

The Safer Shower Experience is a roll-in shower designed for use by individuals who use wheelchairs. It has a flexible water barrier and removable rubber ramp that allow a wheelchair to roll directly into the shower stall, where the user can transfer to the drop-down, fold-away bench. Other features include multiple shower settings, two shower heads (hand-held and stationary), four grab bars, chrome hardware, temperature safety valves, and a cushioned drop-down seat.

Safeshower Transitions

SafeShower Transitions are shower ramps designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. These ramps can be installed with silicone adhesive for a permanent application or with double-back tape for less permanent applications. They have a slip resistant surface and are made of composite plastic that is not absorbent. SafeShower transitions come with a built-in side approach, or they can be

Safetemp Ii Pressure Balance Valve (Model Gs-105)

The Safetemp II Pressure Balance Valve, model GS-105, is a temperature control valve that maintains shower or bath water temperatures within a comfort zone by equalizing hot and cold water pressure. This is a washerless rough-in valve with maintenance stops, made of rough brass. WARRANTY: Limited lifetime warranty.

Safety Armrest (Model 6287)

The Safety Armrest, model 6287, is an anodized aluminum safety frame designed for those who need extra support when using the toilet. The armrest installs between the seat and the bowl and plastic sleeves prevent marring of the bowl; there are no floor supports. The frame pivots up for cleaning. The armrest raises the toilet seat by 1 inch. DIMENSIONS: Armrest height is 12 inches above the bowl; the width between arms is 18 1/2 inches.

Safety Bath Serenity Walk In Bathtub

The Safety Bath Serenity Walk In Bathtub is a bathtub designed for use by individuals with walking or balance disabilities. This fiberglass tub features a wide, outward-swinging door in the side with a low entry step to enable the user to enter the tub without climbing over the side. The door is available in a choice of right or left opening. Standard equipment includes an integral molded seat and a removable booster seat, trim boards, grab bar on the door, pop up drain with waste overflow, and

Safety Bath Stretch Walk-In Bathtub

The Safety Bath Stretch Walk In Bathtub is a bathtub designed for use by individuals with walking or balance disabilities. This fiberglass tub features a wide, outward-swinging door in the side with a low entry step to enable the user to enter the tub without climbing over the side. The door is available in a choice of right or left opening. Standard equipment includes an integral molded seat, trim boards, grab bar on the door, pop up drain with waste overflow, and external drain kit. OPTIONS: F

Safety Bath Supreme Institutional Bathtub

The Safety Bath Supreme Institutional Bathtub is designed for use in assisted living facilities. This walk-in tub is designed to eliminate the risk of infectious bacteria for multiple bathtub users. This tub features a specially-designed air system, the San-Air Whirlpool System, which prohibits bacteria from entering the whirlpool system. Additional features include hot air purge to remove moisture at the whirlpool jet tips and a cleaning system that sanitizes the surfaces of the bathtub after u

Safety First High Profile Tub Bar (Model Sf580)

The Safety First High Profile Tub Bar, model SF580, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The bars are made of tubing with a grooved surface to aid in gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. The bar is higher for use by taller individuals. DIMENSIONS (HxW): 15 x 7.25 inchess, with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Low Profile Tub Bar (Model Sf590)

The Safety First Low Profile Tub Bar, model SF590, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. Bars have a grooved surface for secure gripping. Adjustable mounting clamps have neoprene pads to protect tub walls. DIMENSIONS (HxW): 6 x 17.25 inches with 1 inch diameter tubing. Mounting clamps fit tub walls 3.75 to 5.75 inches wide. COLOR: White.

Safety First Multi-Grip Tub Bar (Model Sf585)

The Safety First Multi-Grip Tub Bar, model SF585, is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. This portable grab bar has a higher horizontal bar on one side and a lower horizontal bar on the other side, providing two levels to hold onto when getting in and out of the tub. Bars are made of plastic tubing with a grooved surface for gripping, and come with adjustable mounting clamps with neoprene pads to protect tub walls. DIMENSIONS: Two 8-inch long

Safety Frame

The Safety Frame is an aluminum safety frame that attaches to the hinge of a toilet seat. The feet have plastic tips on them. DIMENSIONS (WxH): 18 x 27 inches.

Safety Guardrails (Model 6336)

Safety Guardrails, model 6336, are adjustable safety frames designed to provide extra support for individuals when using the toilet. The unit installs between the seat and the bowl. Either or both arms may be removed by push button locks. The legs have plastic tips to protect the floor. DIMENSIONS: Height adjusts from 15 to 20 inches; width adjusts from 17 to 20 inches.

Safety In The Bathroom

DO IT YOURSELF ENTRYPURPOSE: To make bathroom use safer for seniors and individuals with mobility, walking, or balance disabilities. This article, part of the chapter entitled "Bathroom & Washing Up," dicusses ways to provide greater bathroom safety, including using non-slip surfaces in the tub or shower and on the bathroom floor; installing grab bars; ensuring adequate lighting; and having ground-fault-interrupted (GFI) outlets in the bathroom. AUTHOR: Greenstein, D. TITLE: Bathroom Safety.

Safeway Step

The Safeway Step is a bathtub insert designed to convert a tub into a walk-in bathtub for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The unit is installed by cutting a section of the existing tub and custom fitting the resulting opening. The unit can be installed in most types of bathtubs, including fiberglass, steel, or cast iron. The insert provides easier access into the bath/shower area.

Sanctuary Walk In Bath

The Sanctuary Walk In Bath is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub fits most standard tub footprints, and is abailable configured to fit in a corner or with its back to the wall. It has an extra wide, Low-level entry with an inward opening, self-sealing door with a closing mechanism that can be operated while standing or sitting. It comes with either a left-or right-hand door opening. Other features include Tem

Scald Guard

Valves only, or tub spout and shower head combinations. Can be set not to turn past hot temperature limit. Pressure balance available. Most have integral volume flow control.

Seabridge Cameo Walk-In Bath

The Seabridge Classic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The rotating Easy Assist entry and exit door is inward-opening and lever removable for caregiver access. Other features include a built-in seat with a contoured, anti-bacterial cover; a textured floor; fast-fill taps

Seabridge Classic Walk-In Bath

The Seabridge Classic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. Other features include a built-in seat with a contoured, anti-bacterial cover; a te

Seabridge Majestic Walk-In Bath

The Seabridge Majestic Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. This tub also has a built-in powered, belt-style seat that lowers the user to the

Seabridge Paradise Walk-In Bath

The Seabridge Paradise Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. This tub is equipped with a contoured backrest for fully-reclined bathing and it a

Seabridge Universal Slide-In Bath

The Seabridge Universal Slide-in Bath is an accessible bathtub designed for use by individuals with mobility or balance disabilities, spinal cord injury, or arthritis. This tub fits in the space of a standard tub or shower and is equipped with a door in the side, eliminating the need to step over the tub wall. The door of the Universal rises up and then swings out away from the bath to facilitate sliding tranfers to the tub seat. The system is spring assisted and can be operated by an individual

Seabridge Victorian Walk-In Bath

The Seabridge Victorian Walk-in Bath is a walk-in bathtub designed for use by individuals with mobility or balance disabilities or arthritis. This compact tub fits in the space of a standard tub or shower and is equipped with front-door entry, eliminating the need to step over the tub wall. The inward-opening door has a palm-pad latch on the top that can be activated with the palm of the hand, a closed fist, or an elbow. Other features include a built-in seat with a contoured, anti-bacterial cov

Sensor Soap Pump

The Sensor Soap Pump is a liquid soap or lotion dispenser designed for use by individuals with neurological, upper extremity, or severe physical disabilities or spinal cord injury. This automatic unit dispenses soap touch-free when the user places a hand under the sensor. An LED light timer blinks for 20 seconds to indicate how long to lather for germ-free hands. Four volume settings allow the pump to dispense preset amounts of soap or lotion. The unit holds 14 ounces of soap or lotion. POWER: U

Serpentine Handicapped Shower Floor.

Black and white terrazzo shower floor is designed with 1/2 inch threshold for wheelchair accessibility. Floor is 40 inches wide and 40 inches deep. Meets California requirements. Cal. Title 24, Part 2-2- 1711 and ANSI Standard A-117.1-1980. .

Shower Access Platform

CUSTOM ADAPTATION PURPOSE: To provide access to a shower stall for an individual with mobility disabilities. The shower of the home was too small to allow a shower chair to be maneuvered and the base of the shower was recessed into the floor, making it difficult to pull the chair out of the shower. The solution was to develop a platform or false floor made of marine plywood. The platform was square with one corner cut out to fit around a small ledge in the shower. The plywood was treated with a

Shower Anywhere (Models Sa-1, Sc-1, Sch-1, Ss-1, & Ss-2)

Shower Anywhere is a portable shower designed for use by individuals with mobility or severe physical disabilities. This system, models SA-1, SC-1, and SCH-1, consists of a plastic tank, a three-ply braided shower hose that stores in an annular groove in the tank when not in use, and a shower head with a fingertip flow control valve and a water conservation switch. Within the tank are an electric pump and a rechargeable batttery (where applicable). An accessory compartment in the tank stores a p

Shower Anywhere Stall (Model Shs-1)

The Shower Anywhere Stall, model SHS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a left- or right-hand mounted tilt-up transfer seat. The system includes the free-standing aluminum frame enclosure with shower curtains on three sides; a Shower Anywhere unit, model SA-1 (see entry); and a waste water reclaimin

Shower Anywhere Stall (Model Shs-2)

The Shower Anywhere Stall, model SHS-2, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a swivel bench that rotates a full 90 degrees, enabling the user to sit or be placed on the bench outside the enclosure and then be rotated into the stall. An adjustable backrest with a chest belt and a lap belt aid in positioni

Shower Cabinet

Shower cabinet with sliding seat. Lock in front or rear position. Standard toilet seat, can be ordered with bedpan holder. Front has slots for splash guard door which must be removed to enter. Control panel has shower hose and thermostat. Optional shampoo basin.

Shower Cabinet (Model Ms 348)

The MS 348 is a 1-piece shower with a built-in corner seat. It features a textured floor with rounded corners, built-in soap dish, and pre-drilled openings for drain and overflow connections. The shower is made of fiberglass and thermoformed acrylic with resin backing. Valves can be located on either the left or right hand side. Shower value and head not included. DIMENSIONS: Overall measurements (WxDxH) are 48 x 34 x 84 inches; the ledge at the entrance is approximately 5 inches high; the entra

Shower Platform

The Shower Platform is an elevated shower platform designed for use by people with lower extremity and mobility disabilities, spinal cord industry and others who regularly use a wheelchair. The platform raises the floor of a shower to accommodate a wheelchair that must enter the shower using a ramp. It is designed to be used with a PVI Threshold Ramp (see separate entry), which is sold separately. Each platform is custom built to fit an existing shower basin; however, it is only available in a r

Shower Rail

CUSTOM ADAPTATIONPURPOSE: To enable a child with balance disabilities to steady him/herself in the shower. Designed to be completely removable and to provide balance assistance only, this grab bar is made of PVC pipe attached to commercial strength suction cups of the type used by glaziers to carry large panes of glass. PVC pipe uprights are fitted into the handgrips of the suction cups and joined to the horizontal bar with PVC joints. DIMENSIONS: The pipe is 31 millimeters in diameter. The grab

Shower Seat

The Shower Seat is a folding shower seat designed for use by individuals with balance, lower extremity, or mobility disabilities, arthritis, or spinal cord injury. This single-piece, wall-mounted seat has swing-down legs and is available with a phenolic, HDPE, or padded seat surface. DIMENSIONS (HxLxD): 18 x 22 x 16 inches. CAPACITY: 500 pounds.

Shower Seat For Wheelchair Transfer (Models 710A & 710T)

Wall mounted stainless steel shower seat with tubular frame, folds flat against wall. L shape to provide easy transfer. Teakwood or Naugahyde covered 2 inch foam cushion over plywood base. Seat dimensions are 32 inches by 20 inches by 13 inches. Seat height is determined by wall mounting. Right or left available.

Shower Sentry System

The Shower Sentry System is a shower and water temperature control system designed to prevent scalding for those with reduced sensation or slower reaction times. The system reduces the volume of water required for an effective shower and automatically shuts off when the water temperature reaches 115 degrees Fahrenheit. This enables the user to take a hot shower, but prevents scalding caused by the excessively high water temperatures produced by hot water heaters typically set at 140 degrees or h

Shower Stall (Model Shr-1)

The Shower Stall, model SHR-1, is a portable shower enclosure designed for use by individuals with mobility disabilities. The unit can be used as a shelter while showering outdoors or to enclose a portable toilet. Large enough for two users, this enclosure features front and rear openings that extend the full length of the curtains and can be closed and secured with the attached quick-release fasteners. Made of heavy-duty mildew-resistant vinyl, the curtains are attached to support bars at the t

Shower Trolley

The Shower Trolley is a portable bathtub designed primarily for institutional use. It consists of a stretcher on wheels with a vinyl mattress, raised sides lock in place, and a drainage system at foot of mattress.

Shower Veil Trackless Shower Door

The Shower Veil Trackless Shower Door is a shower door designed for use in roll in showers. The door opens and closes without sliding on a track, enabling wheelchair users to enter the shower without the necessity of getting over the track. Doors have one, two, or four panels made of lightweight, hollow core polycarbonate; the edge trim and hinges are made from high impact PVC thermoplastic. These lightweight doors are mounted to the walls, so no track is needed to carry the weight of the door.

Showertub (Model 3060)

The ShowerTub, model 3060, is a shower bathtub designed for use by individuals with walking or balance disabilities or arthritis. This single-threshold step-in shower repalces a standard five-foot bathtub and has a choice of a right- or left-handed drain. This shower features one-piece molded fiberglass construction with a slip-resistant floor and semigloss finish that resists mold, mildew and stains. OPTIONS: Stainless steel grab bar and a pull-down, wall-mounted shower seat. DIMENSIONS (LxW):

Single Handle Pressure Balance Tub/shower Fittings (Model C0-44-720)

The Single Handle Pressure Balance Tub/Shower Fitting, model C0-44-720, is a single lever shower faucet control designed for use by individuals with grasping or upper extremity disabilities. The wrist blade lever handle can be activated manually, or by wrist or elbow. The system has an adjustable shower head, solid cast brass housing, a ceramic cartridge, and pressure balance capability to maintain a temperature range of plus or minus 3 degrees Fahrenheit. CAPACITY: 2.5 gallons per minute (gpm)

Single-Handed Barber

This Single-Handed Barber is an electric hair trimmer that cuts evenly in any direction, enabling you to maintain your own closely cropped, clean-cut hairstyle. As simple as combing your hair, the circular trimmer's rotary cutting system and stainless steel blades cut as the unit is moved circularly through your hair while accommodating the contours of your pate. The trimmer's two attachments cut hair to four different lengths (at 1/8 inch , 1/4 inch , 3/8 inch , or 1/2 inch) and its ergonomic d

Sink Access Stairs

CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently access a bathroom sink. A three-step ladder was made of stainless steel tubing. Bent into a D shape, the side rails of the ladder act as handrails for the user. Stair treads for the ladder were made of waterproof plywood coated with polyurethane and painted with non-slip tread deck paint. Crutch caps were fitted to the ends of the legs. TITLE: Bathroom Access. JOURNAL: TAD Journal. REF: Volume 27, Number 3,

Sink Modifications

DO IT YOURSELF - PURPOSE: To make a bathroom and sink more accessible to seniors and others with arthritis, mobility disabilities, and other physical disabilities. This introduction to a chapter entitled "Bathroom & Washing Up" suggests a variety of modifications to the existing fixture. Included are supporting the sink with brackets or legs, rather than a vanity and insulating pipes to prevent injury; adding a counter with open access at seated height for a wheelchair user and install small

Sit Bath (Model 076200)

Sit bath for ambulatory or wheelchair persons. Sliding seat facilitates entering cabinet, locks in position. Front door with seal allows water to be filled to shoulder level. Control panel with thermostat, shower hose and optional shampoo basin.

Sitz Bath

The Sitz Bath is a sitz bath designed for use by individuals with severe physical disabilities. It is useful in the treatment of hemorrhoids and other conditions in the anal and genital areas, especially after an episiotomy. It has wide contoured edges for comfort and comes with a convenient on-off flow control clip. It is designed to fit standard toilets. The bath is equipped with no-kink tubing. The bag capacity is two quarts and basin capacity is 2.1 quarts. DIMENSIONS: The tubing is 60 inche

Sitz Bath (Model 6148)

Sitz Bath is made of durable plastic with a contoured seat that fits inside standard toilet seat. Irrigation container and tubing are included.

Sitz Bath (Model C1104)

The Sitz Bath, model C1104, is designed for use by individuals with difficulty treating or cleansing anal or genital areas. This plastic bath fits most standard commodes.

Smart Shower

The Smart Shower is designed to enable individuals to shower independently with the use of only one hand. The device ensures safety, remaining stable in a fixed position with the help of an antilock system.

Smooth Grab Bar

The Smooth Grab Bar is a wall-mounted grab bar designed for use by individuals with balance or mobility disabilities or spinal cord injury. It attaches to the wall at two points (for lengths below 36 inches) or three points (for lengths 36 inches or longer). DIMENSIONS: 12, 16, 24, 32, 36, 42, 48, or 60 inches long. COLOR: Available finishes include antique brass, polished brass, polished nickel, satin chrome, satin nickel, satin brass, satin gold, antique copper, black nickel, polished gold, oi

So-Lo Bathtub/shower

The So-Lo Bathtub/Shower is a walk-in shower and bathtub designed for use by individuals with arthritis or mobility disabilities. This combination shower and bathtub has a door with a low entry step, and is avaiable with either a left- or right-hand drain. OPTIONS: Heated shower deck for seating; warm air massage system (12 warm air jets with check valves, warm air blower, and touch pad control); and faucet/drain kit (Moen Posi Temp TL 183 non-scald faucet, tub spout with diverter, and pop up dr

Sof-Sitz

The Sof-Sitz is a portable, inflatable sitz bath that fits on rim of a toilet or a toilet seat. Made of heavy duty vinyl, the Sof-Sitz is designed to fit all standard toilet seats. WARRANTY: 1-year limited warranty.

Soiree Toilet (Models Ms964214Cfg & Ms964214Cf)

The Soiree Toilet, models MS964214CFG and MS964214CF, is a tall toilet designed for use by seniors and individuals with physical disabilities. This 1.6 gallons per flush (GPF) elongated one-piece toilet has a large water surface and a powerful, quiet siphon jet flush. The toilet comes with a Soiree SoftClose toilet seat, an elongated closed front seat with a hinge system that lowers the seat down to the bowl gently and quietly to prevent injury and eliminate toilet seat slam. A tank cover, fitti

Spa Shell

Bathing system. Shell of bathing unit rotates from vertical position to horizontal position. In vertical position the user sits on, or transfers to, the built in seat. Full immersion bathing with complete coverage of legs. 65 gallon capacity. Ergonomically designed faucet valve fills tub. Control panel installable for user or attendant access. Built in thermostatic mixer with temperature gauge. Built in disinfection system automatically mixes water and disinfectant. Vacuum thermoformed, coextrud

Space-Saver Walk In Bathtub

The Space-Saver Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. Features include an anti slip floor and seat; right- or left-mounted doors; 16-jet hydrotherapy spa with hot temperature maintainer; thermostatic mixing valve control unit; hand-held showerhead; and a curtain rod and matching shower curtain. DIMENSIONS (HxLxW): 38 x 37.5 x 26 inches. Seat is 15.5 inches high. Door is 17 inches wide. COLORS: White or

Spaloo Classic

Spaloo Classic is a toilet bidet designed for use by individuals with mobility or upper extremity disabilities. Made of germ-resistant plastic, this unit is designed to fit existing round or oval toilets and features a heated, hydraulic soft close seat. Other features include two water spraying nozzles for front and back cleaning, adjustable water pressure, adjustable water temperature, and adjustable seat temperature. Controls are located at the side of the seat. WARRANTY: One-year warranty.

Special Care Shower Unit (Model Sc6060)

Molded fiberglass shower stall accessible to wheelchairs. Fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Unit has a detachable 48 inch wide by 20 inch deep wheelchair accessible ramp, with an attached rubber mat for no-skid traction. An l8 inch wide stainless steel and teakwood fold-down seat is attached to the side wall. Five grab bars made of l 1/2 inch18 gauge stainless steel, attached with 3 by 3 inch metal mounting plates. Two 24 inc

Special Care Shower Unit (Models Sc4586Cs & Sc4186)

Molded reinforced shower units are fabricated of fiberglass over a cellular core and a reinforced polyester outer protective coating. Grab bars are made of 1 1/2 inch 18 gauge stainless steel, mounted with 3 by 3 inch metal mounting plates. SC4586CS has two grab bars: l6 inch straight grab bar is mounted at an angle on the back wall with the lower mounting 33 inches from the floor of the unit; 24 inch straight grab bar is mounted vertically on the valve wall with the bottom of the bar 42 inches

Special Care Tub And Shower Unit (Model Sc6083)

Molded reinforced fiberglass bathtub and shower unit is fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Equipped with four grab bars, secured from the rear with a 3 by 3 inch metal mounting plate. Two 32 inch straight grab bars are mounted horizontally on the flat back wall at heights of 21 and 29 inches from the tub floor. One 24 inch straight grab bar is mounted horizontally on the valve wall 29 inches above the tub floor, and a 12 inch

Special Needs Shower (Model Xst 6337 Bf 1.25Ww)

The Special Needs Shower, model XST 6337 BF 1.25 WW, is a controlled environment shower with built-in grab bar and seat designed for use with individuals with Alzheimer's Disease. The 24-inch wing wall design allows the toilet or vanity to be closer to the shower, creates a splash-free cove, and defines the space for user security. Controls are out of reach or completely outside of the shower on the wing wall. Contrasting color bars provide further definition and assist visual depth perception.

Special Needs Wheelchair Accessible Shower (Model 6236)

The Special Needs Wheelchair Accessible Shower, model 6236, is an accessible roll-in shower stall designed for use by individuals with mobility disabilities or spinal cord injury. The unit has a chip-resistant gelcoat finish reinforced with fibreglass, and comes with a left- or right-hand 18-gauge stainless steel grab bar. When installed as per installation instructions, the shower has a sloped threshold for wheelchair access, while retaining water within the shower. This shower also has a molde

Stainless Steel Grab Bars (Models Gb-11224C, Gb-11230C, Gb-11236C, Gb-11242C, Gb-11248C, Gb-11412C, Gb-11416C, Gb-11418C, Gb-11424C, Gb-11430C, Gb-11436C, Gb-11442C, & Gb-11448C)

Stainless Steel Grab Bars are designed for use by individuals with balance or mobility disabilities. Each grab bar comes with six stainless steel screws. DIMENSIONS (diameter x length): 1.5 x 24 inches (model GB-11224C), 1.5 x 30 inches (model GB-11230C), 1.5 x 36 inches (model GB-11236C), 1.5 x 42 inches (model GB-11242C), 1.5 x 48 inches (model GB-11248C), 1.25 x 12 inches (model GB-11412C), 1.25 x 16 inches (model GB-11416C), 1.25 x 18 inches (model GB-11418C), 1.25 x 24 inches (model GB-1142

Stand-Helping Closetool Toilet Seat

---- PROTOTYPE --------- PURPOSE: To design a prototype of a toilet seat that assists individuals with arthritis or balance, lower extremity or mobility disabilities to stand from a seated position after using the toilet. The Stand-helping Closestool Toilet Seat is a toilet seat with a hydraulic-powered lever function, which helps individuals to stand up with ease from a seated position on the toilet. The device could be used with a walker, cane, other mobility devices, or a hand rail. TITLE: St

Stand-Up (Model Ckb-01 & Ckb-02)

The STAND-UP, models CKB-01 and CKB-02, is a grab bar for toilet designed for use by people with standing, balance, lower extremity and mobility disabilities. The unit has a stainless steel base with non-slip rubber edges that rests on the floor and does not require mounting to the floor, wall or ceiling. The base has a U-shaped indentation at one end so that it extends along both sides of the toilet. Two handrails are mounted on each side of the base, extending alongside the length of the toile

Standard Power Toilet Aid

The Standard Power Toilet Aid is an elevated toilet seat and lift combination designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with arm rests, a padded backrest and an electric lift that lifts the toilet seat (not included) 13 inches above the toilet. A single button controls up and down movement. The unit collapses for transport. DIMENSIONS (HxW): 39.

Stander Curve Grab Bar

The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta

Staydry Collapsible Water Dam

The StayDry Collapsible Water Dam is a flexible water dam for shower stalls designed for use by individuals with mobility or walking disabilities. This dam enables a wheelchair or a walker to transfer in or out of a shower without encountering a barrier as it collapses when rolled or walked upon. The water dam controls both the shower water and the shower curtain. The dam is installed by cutting to size using a pair of sissors. Apply by removing the paper covering the two strips of double sided

Steel Bathtub Rail

The Steel Bathtub Rail is a grab bar for bathtub designed for use by individuals with balance or mobility disabilities, spinal cord injury, or arthritis. The rail has two holding areas on the handle for a firm grip when getting in and out of the tub. It has a stainless steel locking system and rubber pads to protect tub contact surfaces, and is available in Fixed Height or Adjustable Height models. WARRANTY: Limited lifetime warranty.

Step Assist

Step Assist are bathtub access stairs designed for use by individuals with lower extremity disabilities or arthritis. These steps have a modular design that allows stacking a second step for an additional rise while a third unit provides a stair-step effect. The step has an extra-large platform with a textured finish top for added slip-resistance. Rubberized feet help prevent the unit from slipping. DIMENSIONS(WxLxH): 19.75 x 16 x 4 inches. One step adds 4 inches; a second one stacked adds an a

Straight Grab Bar

The Straight Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disaabilities, arthritis, or spinal cord injury. These grab bars are made of stainless steel tubing, with concealed-screw mounting flanges heliarc welded to the bar to form a single structural unit. This grab bar is available in various lengths. DIMENSIONS: Tubing has an outer diameter of 1.25 or 1.5 inches with a wall thickness of 0.05 inches. Flanges are 3 inches in diameter. The bar is available

Straight Grab Bar (Model B-5806)

The Straight Grab Bar, model B-5806, is a wall grab bar designed for use by people with balance, lower extremity and mobility disabilities. This straight grab bar is constructed of type 304 stainless steel 18-gauge tubing with a satin finish. It has a concealed mounting flange with a stainless steel plate and screw holes for concealed anchors. A stainless steel cover snaps over the mounting flange to conceal the screws. DIMENSIONS: Available in lengths of 18, 24, 30, 36, 40, 44 and 48 inches. Th

Suction Grab Bar, Adjustable Length

The Suction Grab Bar, Adjustable Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar telescopes for adjustability and can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release leve

Suction Grab Bar, Fixed Length

The Suction Grab Bar, Fixed Length, is a grab bar designed for use by individuals with lower extremity or balance disabilities or arthritis. This bar can be used on a shower wall, in the bath mounted on the tub, as a temporary towel bar, or near a chair or stairwell for assistance when standing or climbing stairs. It is portable and installs on most smooth surfaces without tools. Large suction cups on each end and secure to the surface with lock/release levers. OPTIONS: Replacement suction cups

Suction Tub Grab Bar (Models 1255A, 1255B, & 1255C)

The Suction Tub Grab Bar is a bathtub grab bar designed for use by individuals with balance or mobility disabilities. The adjustable length bar attaches with suction. SIZES: Small (model 1255A), medium (model 1255B), or large (model 1255C). DIMENSIONS: Length is 17.25 to 22.25 inches (small), 22 to 27 inches (medium), or 26 to 30.75 (large). CAPACITY: 250 pounds. COLOR: White. WARRANTY: Three-year warranty on the grab bar, one-year warranty on the suction cups.

Super Grip Perma Handle

The Super Grip Perma Handle is a bathroom safety product designed to help with getting in and out of the bathtub/shower and to help prevent slips or falls. It is a textured handle, opposed to a Chrome, Vinyl, or Enamel Hand Bar. It is made for individuals with balance issues and/or any other disability that makes it difficult to step in or out of the bathtub or shower. It can be used by a person of any age and attaches to most surfaces. It screws in for a permanent hold and can be mounted vertic

Support Frame For Bath Insert

CUSTOM ADAPTATIONPURPOSE: To support a bathtub insert at a height that is comfortable for the parents when bathing a child with cerebral palsy. The frame is constructed of 20- millimeter stainless steel tubing welded into a rectangular frame with legs at all four couners and in the center of each of the longer sides. Rubber feet at the bottom of each leg provide traction for the frame. The frame can stand in a bathtub, and the bathtub insert can be filled by a hose attached to the tap below or a

Supreme Modules Adjustable Counters

Supreme Modules Adjustable Counters are accessible counters designed for use by individuals with mobility disabilities. The patented motorized lifting mechanism enables the stovetop or sink to be lowered up to six inches for wheelchair access.The plumbing, electrical system and lifting mechanism are built in to the unit which repaces existing counters. The counter supports up to 250 pounds and can be raised or lowered as needed using the push button on the front of the unit or with the included

Supreme Walk-In Bathtub

The Supreme Walk In Bathtub is an accessible bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This walk-in tub has a hydrotherapy air spa system with 168 jets providing warm therapeutic massage. Other features include a heated feet and leg massager; a hydrotherapy hot temperature maintainer; a thermostatic mixing valve control unit to prevent scalding; a high- gloss protective finish; an anti-slip floor; an anti-slip contoured seat with bidet not

Sure-Safe Bathtub Rail (Model 2032A)

The Sure-Safe Bathtub Rail, model 2032A, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. Made of heavy-gauge, welded steel, this unit provides two gripping surfaces to facilitate both entry and exit from tub. A clamp holds the unit firmly to the tub wall without marring tub surface. DIMENSIONS: The unit fits tubs with walls 2.75 to 6.5 inches thick. CAPACITY: 250 pounds. COLOR: White. WARRANTY: Lifetime limited warranty.

Sure-Safe Chrome Bathtub Safety Rail (Model Gf2033-1)

The Sure-Safe Chrome Bathtub Rail, model GF2033-1, is a grab bar for bathtub designed for use by individuals with balance, lower extremity, or mobility disabilities. This rail provides support for the user when moving in and out of the tub. It has a knurled top to minimize hand slippage, even when wet. Constructed of one-inch chrome-plated steel, it has rubber pads at all contact points to help eliminate scratching the tub surface. The unit comes fully assembled with an included hex wrench for i

Swanstone Barrier Free Folding Shower Seat (Model Bf-2300)

The Swanstone Barrier-Free Folding Shower Seat, model BF-2300, is a folding corner shower seat designed for use by individuals with balance or mobility disabilities. Two seat styles fit the back wall or either side wall (left or right). DIMENSIONS (DxW): 23 1/3 x 22.5 inches. CAPACITY: 250 pounds.

Swedish Tap Turner (Model 16K037A)

The Swedish Tap Turner, model 16K037A, is a multi-pin tap and knob turner designed for use by individuals with arthritis, grasping disabilities, or limited grip strength. This device features a large handle and multiple nylon pins on the face to grasp many shapes of taps and knobs. The device is made of plastic.

Swing Up Grab Bar (Models B-4998 & B-4998.99)

The Swing Up Grab Bar, models B-4998 and B-4998.99, is a grab bar for toilet designed for use by people with balance, lower extremity and mobility disabilities. The grab bar is mounted on a wall on either side of a toilet, and it swings upward when not in use. The bar and mounting hardware are made of stainless steel with a satin finish (model B-4998.99 is peened). DIMENSIONS: Extends 29 inches from wall. The diameter of the steel tubing is 1.25 inches. WARRANTY: Warranted to be free from defect

Tap Spanners.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Devices for turning taps on and off using push or pull motions for persons with limited hand strength or dexterity. Illustrates construction of simple devices to turn taps, made of plywood cut in a paddle shape with dowels fastened to the wide end. The dowels fit around the tap, allowing it to be levered on or off. The device for taps with an even number of spokes has 4 dowels, that for an odd number has 3 dowels. Includes diagrams, drawings and photog

Tap Turner

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The Tap Turner provides leverage for those with limited ability to turn taps and knobs. Illustrates a device made of 8 inches of an aluminum bar 1 by 1/8 inches with two pieces of 3/8 by 1 by 4 inches wood made into a handle; and two carriage bolts fastened 1 1/2 inches apart on the other end (or it can be made adjustable by making several holes on the strip and the inside bolt movable, fastened with a wing nut). SKILLS REQUIRED: Metalworking. Woodwork

Tap Turner (Model 16K025)

The Tap Turner, model 16K025, is a tap turner designed for use by individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. This device clamps onto a water tap or a door knob to convert knobs that are difficult to turn into levers. DIMENSIONS: 2 inches (6 centimeters) diameter.

Tap Turners

The Tap Turners are tap turners designed for individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. The devices are designed to fit onto a wide variety of sizes and shapes of both crystal and traditional crosshead taps. They are supplied as a pair with red handle for hot and a blue handle for cold. The lever handle is pivoted to allow for clearance with a wall at the back of the sink or basin.

Tapmaster

Tapmaster is a hands-free faucet control designed for use by individuals with upper extremity disabilities. This compact valve assembly installs on any faucet and uses water pressure to function, eliminating the need for electronics, batteries, power supplies, or an air pressure system. Models are available with single or dual kick-pedal activation for single or dual water lines or for island cabinets; with kick-pedal activation and water temperature control for standard and island cabinetry; wi

Telescoping Grab Bar

The Telescoping Grab Bar is a wall grab bar designed for use by individuals with balance or mobility disabilities. This safety grab bar can be mounted in any direction on any smooth non-porous surface without damage to walls. The suction cups can provide up to 130 pounds of pull strength. SIZES: Large, medium, or small. DIMENSIONS: The length range is 26 to 31 inches (large), 22 to 27 inches (medium), or 17 to 23 inches (small), with a hand holding area of up to 21 inches (large), 17 inches (med

Tenura Anti Slip Bathroom Aid

The Tenura Anti Slip Bathroom Aids are bathtub safety treads and non-slip floor covering designed to provide traction in the bathtub or shower or on wet bathroom floors for people with balance or mobility disabilities. Designed to help reduce the risk of slipping and falling on wet surfaces, these non-slip discs or strips is made of self-adhesive material intended to provide a non-slip grip in bathrooms and changing rooms where floors and surfaces tend to be wet and slippery. This product is sol

Textured Insulated Grab Rails

Textured Insulated Grab Rails are wall grab bars designed for use in the bathroom by individuals with mobility or balance disabilities. These textured plastic bars feature covers to hide the mounting hardware (mounting hardware not included). DIMENSIONS: All models extend 2 inches from the wall and are 1.5 inches in diameter. These grab bars are available in a choice of 12, 15, 16, 18, 24, or 36 inches long (each sold separately). COLOR: White.

Textured Wall Grab Bars

Textured Wall Grab Bars are wall grab bars designed for use by individuals with balance disablities. The bars have a diamond-knurled textured gripping area. DIMENSIONS: The bars are available in 12, 16, 18, 24, or 32 inches long with a depth of 1.25 inches and height of 1.5 inches. Each bar requires an additional 3.5 inches in length and 3.75 inches in height.

The Gripper (Model 16L003A)

The Gripper, model 18L003A, is a knob turner designed for use by individuals with fine motor or grasping disabilities, arthritis, or limited hand strength. This indoor/outdoor gripper fits over existing handles such as spigots and other hard-to-turn handles. It comes with two separate grip locks making it compatible with most valve and spigot handles. The device also features red and blue indicator caps that aid in identifying hot and cold valves in the laundry area.

Tidee Tubb Splash Guard

Tidee Tubb is a corner splash guard designed for use by individuals with balance, lower extremity, or mobility disabilities. Placed in each corner of a bathtub, the guards help prevent falls due to wet and slippery floors. The guards come two per package with caulk for installation. DIMENSIONS (HxL): 11 x 9.25 inches. WEIGHT: 1 pound. COLOR: White, bone, or clear.

Toddler Ada Stainless Steel Portable Sink (Model Pse-2020I)

The Toddler ADA Stainless Steel Portable Sink, model PSE–2020I, is a portable accessible sink designed for use by toddlers and children who use wheelchairs. This accessible sink is specifically designed for use in schools and other environments with small children. It is equipped with a single stainless steel basin with a single lever faucet, and it provides hot and cold running water. The unit features a 3-gallon tank for fresh water, a 4-gallon tank for waste water, and a 20 AMPS preset water

Toilet And Support Rails

The Premier Care ADA (Americans with Disabilities Act) Compliant Toilet is designed for individuals who have mobility and balance challenges or severe physical disabilities. Is over 3 inches higher than regular toilets and has an elongated bowl which accommodates more body types and prevents messes. This toilet’s height exceeds ADA Standards’ minimum. Has a SOFTCLOSE seat and lid closes behind user, slowly and automatically after a slight push. Economically-friendly: uses less water.

Toilet Flush Lever

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted toilet flush lever for an individual with multiple sclerosis (MS) and wheelchair user. Flushing the toilet was becoming increasingly difficult because a commode occupies the space on one side of the toilet and there is a wall on the other side, making it not possible to bring the wheelchair alongside the cistern. The user had to lean right over the length of the toilet bowl to reach the flush button from her chair. An adapt

Toilet Rails (Model 5470)

Adjustable height toilet safety frame, adjustable width. Attaches to toilet seat brackets. Legs can be raised while attached for cleaning. Anodized aluminum tubing. Adjustable height 28 to 32 inches, width 20 to 24 inches, depth 19 inches, weight 3 pounds.

Toilet Safety Arm Support (Model 1810)

The Toilet Safety Arm Support, model 1810, is a safety frame designed for individuals who need extra support when using the toilet. The seat rests on a white plastic sleeve and attaches easily with a center bracket. The tubing is made of anodized, rustproof aluminum. No legs extend to the floor. Price stated is for 2 arm supports (one complete set).

Toilet Safety Frame

The Toilet Safety Frame is a safety frame that attaches to the toilet for individuals who have limited mobility and strength and need assistance getting on and off the toilet. The frame is constructed of one inch anodized aluminum tubing and provides a secure handrip. It is adjustable both in height and width to fit most persons needs. It bolts securely to the toilet and has skid resistant rubber tips that are metal enforced. DIMENSIONS: Height and width both adjust from 26 to 30 inches.

Toilet Safety Frame (Model 1650)

The Toilet Safety Frame, model 1650, is an adjustable safety frame designed to give support to individuals when sitting down or standing at the toilet. The tubular frame fits any toilet size as it adjusts both in height and width. Two push buttons release the frame for storage. The frame is made of lightweight aluminum with padded plastic armrests and an aluminum mounting plate. DIMENSIONS: Adjustable in height from 28 to 32 inches and in width from 20 to 24 inches. Distance between handles is 1

Toilet Safety Frame - Knock Down Design (Model 1392Kd)

The Toilet Safety Frame - Knock-Down Design, model 1392KD, is an adjustable-height toilet safety frame designed for use by individuals with arthritis or balance or mobility disabilities. Made from anodized aluminum tubing, the frame attaches with an aluminum bracket. Armrests provide secure hand support. The arms fold back for cleaning and can be removed for transfers. DIMENSIONS: Arm height is 25.75 to 30 inches. Width between arms is 17.5 to 20.5 inches. Tubing is 1 inch in diameter. CAPACITY:

Touch-Free Ez Faucet Adapter

Touch-Free EZ Faucet Adapter is a hands-free faucet adapter designed for use by individuals with upper extremity or grasping disabilities, carpal tunnel syndrome, or arthritis. This adapter turns any kitchen or bathroom faucet into a hands-free faucet. The unit features a built-in infrared sensor that automatically turns the water on when hand movement is detected in front of the fixture. The water stays on only as long as the sensor is activated, eliminating unattended running water. This fixtu

Transfer Shower Floor (Model 3739)

The Transfer Shower Floor, model 3739, is a roll-in shower floor designed for use by individuals with mobility, walking, or balance disabilities, spinal cord injury, or arthritis. This unit features features a modified threshold to retain water yet allow easy step-in or wheelchair access. The unit is made of molded fiberglass and features a ribbed underbody for extra strength and an integral center drain with seal and removable strainer. The slip-resistant surface resists mold and mildew and has

Transfer Shower Floor (Models Fts-3738 & Sts-3738)

The Transfer Shower Floor is a floor for an accessible shower stall for individuals with mobility disabilities. The floor is designed to allow transfers from a wheelchair to a shower seat (not included). The floor has a pebbled, slip-resistant surface. Because it is made from a reinforced solid surface, it has no grout to clean and does not mold or mildew. The color and texture run all the way through and cannot wear away. The floor is made of Veritek (model FTS-3738) or Swanstone (model STS-373

Trap Gear

Trap Gear is a pipe wrap designed to go around exposed pipe surfaces, joints, and valves underneath public washroom sinks to protect wheelchair users from burns, cuts and abrasions resulting from contact with lavatory supply and waste lines. MATERIAL: Trap Wrap is made of vinyl plastisol, a durable PVC plastic. Ultraviolet (UV) and anti-fungal inhibitors ensure that the color will not fade due to exposure to UV rays and will prevent growth of fungus. The surface temperature remains below 95 degr

Travel Assist Bar

The Travel Assist Bar is a grab bar for the bathtub designed for use by individuals with balance or mobility disabilities. Made of heavy-duty plastic, this handle on a round base adheres to the tub or wall using the large suction cup on the bottom. DIMENSIONS: 4.5 inches long. COLOR: White.

Travel Bath Safety Grip Handle

The Travel Bath Safety Grip Handle is a suction grab bar designed for use by individuals with balance or mobility disabilities. It is made of durable plastic with a large suction base to provide extra stability. This grab bar can be installed on any smooth, non-porous tile or tub surface. Installation requires opening the handles, moistening the suction pad, and pressing the handle against the surface while closing the handles. DIMENSIONS: Suction cup is 3.75 inches in diameter.

Tri-Grip Bathtub Rail

The Tri-Grip Bathtub Rail is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The rail provides the individual with three gripping areas for support while moving into or out of the bathtub. Each gripping area has a textured finish. The rail clamps to the tub with adjustable spring steel clamps lined with rubber pads to protect the tub. DIMENSIONS (HxW): 7.5 and 16 x 18 inches. The clamp adjusts from 3.5 to 6 inches in unlimited increments. COLOR: Chrome fi

Trieste Shower Floor For The Handicapped (Model 98 Hc)

Roll in precast terrazzo shower floor, non slip, with integral graded entry ramp. Ramp slope is 1 inch by 12 inches with 1/2 inch front threshold. Center drain with removable stainless plate. Must be set in level grout or mortar bed. Composition: black and white marble chips cast in cement. Rustproof flange extends 1 inch above the outer edge. 60 inches by 60 inches.

Triple Chrome Plated Steel Grab Bars - Adjustable Flange

Triple Chrome Plated Steel Grab Bars - Adjustable Flange are wall grab bars designed for use by individuals with balance or mobility disabilities. The adjustable diamond flange allows increased wall stand-off. The bar's diamond knurl finish can be gripped even when wet, and the triple chrome plating is rust resistant. The bar comes with mounting screws. OPTIONS: Available in some lengths with a second bar set at 45- or 90-degree angle on left or right. DIMENSIONS: Straight bar is 12, 16, 18, 24,

Triple Chrome Plated Steel Grab Bars - Fixed Flange

Triple Chrome Plated Steel Grab Bars - Fixed Flange are wall grab bars designed for use by individuals with balance or mobility disabilities. The bar has a diamond knurl finish for gripping even when wet. The triple chrome plated finish is rust resistant. The bar comes with mounting screws. OPTIONS: Available in some lengths with second bar set at a 45- or 90-degree angle on the left or right. DIMENSIONS: Straight bar is 12, 16, 18, 24, or 32 inches long; the 45-degree bar is 12 x 12 inches; the

Tub / Shower Bar (Model 3636-V)

The Tub/Shower Bar ##3636-V is a stainless steel wall mounted grab bar for showers and bathtubs. The support consists of an L-shaped horizontal bar that provides a grab surface on the back and side walls, and a connected vertical bar for additional hold when entering or leaving the bathing area. The bar is available in 4 concealed or 4 exposed mounting styles, and in right or left hand configurations. DIMENSIONS: 32 x 36 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Sati

Tub Entry Bar (Model 2010)

The Tub Entry Bar ##2010 is a stainless steel floor mounted grab bar for bathtubs. The bar is designed to be mounted on the outside of the tub to provide two handed support, and consists of one U-shaped tube double-angled to form a support that extends vertically to the edge of the tub, horizontally over the tub wall, and down again inside the tub. This support is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 20 (H, outside tub) x 9 (D) x 18 (W) x 10 (H, inside tub) inches w

Tub Grab Bar (Model 08220)

The Tub Grab Bar, model 08220, is a grab bar for bathtub designed for use by individuals with balance disabilities or lower extremity disabilities who require support transfering into and out of the tub. The Tub Grab Bar is made of powdered coated steel tubing and is equipped with rubber-covered clamps that resist slipping and protect surfaces from scratching. No tools are necessary for installation. The grab bar has a cross bar for increased safety and stability. DIMENSIONS (HxW): 12 inches

Tub Grab Bar (Model 564232 )

The Tub Grab Bar, model 564232 is a U-shaped grab bar designed for use by individuals with balance or lower extremity or mobility disabilities. This economy tub bar provides two gripping surfaces. The upper gripping position is intended to assist in entering the tub without use of wrist or body, and the lower position is designed to assist in lowering into or rising from a seated position in the tub. It has an adjustable locking mechanism for stable positioning. This molded bar is lightweight, p

Tub Grab Bar (Model 98005)

The Tub Grab Bar, model 98005, is a grab bar for the bathtub designed to attach to the side of the bathtub to assist individuals getting into and out of the tub. It is made of nylon coated steel and has multi-level hand holds. DIMENSIONS: Clamp adjustment 3 to 7 inches; height above the tub wall is 15 inches; overall width is 8 to 11.25 inches. WEIGHT: 6.5 pounds. COLOR: White, almond or blue.

Tub Grab Bar (Model K10365)

The Tub Grab Bar, Model K10365, is a safety device for entering or exiting a bathtub designed for persons with physical disabilities or balance problems. The vertical, white plastic curved grab bar attaches to the side of the bathtub and can be gripped at a high-level when entering the tub and at a lower level grab bar when exiting. The finish is textured to prevent slippage and rubber lined pads at the bar's base prevent scratches to the tub. Installation requires no tools and the height can ea

Tub Modifications

DO IT YOPURSELF ENTRYPURPOSE: To make bathing safer and more accessible for individuals with mobility disabilities and seniors. This section of a chapter entitled "Bathroom and Washing Up" provides a selection of suggestions for simple ways to make bathtub use safer and more accessible. Included are discussions about installing a hand-held showerhead and grab bars, purchasing and using a bath or shower bench or chair, ensuring sufficient lighting, installing anti-scalding devices, and adapting s

Tub Safety Bar

The Tub Safety Bar is a grab bar for bathtubs designed for use by individuals with mobility and balance disabilities. This heavy-duty chrome-plated steel bar clamps to the edge of most standard tubs and features a horizontal gripping area gradually rising to a vertical gripping area.The Lok-Fit design ensures secure support while vinyl sleeves protect the tub from scratches. DIMENSIONS: The clamps adjust to fit tubs from 3 to 6.5 inches wide. The bar is 17 inches long and 15 inches high at its h

Tub Wall Kit (Models Ha-58 & Gn-58)

The Tub Wall Kit, models HA-58 and GN-58, is a bathtub enclosure designed for use by individuals with balance or moblity disabilities. The walls include low-set soap dishes and are suitable for grab bar installation. Model HA-58 has a bright, glossy surface that comes from a durable, baked-on finish; its design keeps shower head spray from aiming at seams. Model GN-58 is made of Veritek, which has a granite appearance with no surface coating so its color runs throughout. The walls do not mold or

Tub-Guard Bathtub Safety Rail (Models 69263A & 69663A)

The Tub-Guard Bathtub Safety Rail, models 69263A and 69663A, is a grab bar for bathtub designed to assist people with balance or mobility disabilities to enter and exit the tub. The device has a molded plastic body and a textured surface to reduce hand slippage. A lever-operated clamp and rubber pads at tub attachment points prevent movement or scratching the tub surface. SIZES: Standard (model 69263A) and Tall (69663A). DIMENSIONS: Height is 12 inches (standard) or 16.5 inches (tall); fits tub

Tubcut

The TubcuT is a bathtub insert designed for converting a bathtub into a walk-in shower accessible to individuals with mobility or lower extremity disabilities or arthritis. It provides step-through access in the front of any existing fiberglass, acrylic, steel, or cast iron bathtub. The opening is made with panels that are shaped on the job site for a custom fit. The insert can be sized to reach to the bottom of the deepest tub, and can be made as wide or narrow as required. The panels are made

Tuff-Form Shower Base Bathtub Replacement Size

The Tuff-Form Shower Base Bathtub Replacement is an accessible shower stall designed to replace standard bathtubs. Designed for barrier-free showering, this unit can be installed with either vinyl or ceramic tile floors and the pitch to drain is built-in. DIMENSIONS(LxW): 59 x 32.25 inches. CAPACITY: 419 pounds. WEIGHT: 48 pounds.

Tush Push (Model Tp-10Ac)

The Tush Push, model TP-10AC, is a portable electric toilet lift designed for use by individuals with lower extremity disabilities who do not have the body strength to get up from the toilet. This one-motor unit can be installed on most toilets. It has adjustable and removable arms and a touch control handset. This product ships with a standard round front toilet seat. OPTIONS: Replacement shield. POWER: Uses power adapter (included) converting 115 volts alternating current (AC) household curren

Tush Push 1 (Model Tp-10B)

The Tush Push, model TP10B, is a portable electric toilet lift designed for use by individuals with lower extremity disabilities who do not have the body strength to get up from the toilet. This one-motor unit can be installed on most toilets. It has adjustable and removable arms and a touch control handset. This product ships with a standard round front toilet seat. OPTIONS: second battery; elongated seat; and desk type arm chair extension .POWER: Battery-powered 24 volt DC motor. DIMENSIONS: T

Tush Push 2 (Model Tp-20)

The Tush Push 2, model TP-20, is a powered elevating toilet seat designed for use by individuals who have difficulty rising from a seated position. This lift has two motors for increased lifting capacity. This product ships with a standard round front toilet seat. OPTIONS: Replacement shield. POWER: Uses 115 volts alternating (AC) household current adapted to 24 volts direct current (DC). DIMENSIONS: The total width is 25 inches; the seat width is 14 inches. The seat height adjusts from 19 to 26

Two Handle Laundry Faucet (Model C0-44-242)

The Two Handle Laundry Faucet, model C0-44-242. is a lever handle faucet designed for use by individuals with fine motor or grasping disabilities. Features include a swing spout and hose adapter, wrist blade handles, solid cast brass housing, and a ceramic cartridge. DIMENSIONS: Spout is 6 3/16 inches long and includes 4-inch centers for mounting. COLOR: Chrome.

Two Wall Shower / Tub Compartment Grab Bar (Models B-68616 & B-68616.99)

The Two-Wall Shower/Tub Compartment Grab Bar, models B-68616 and B-68616.99, is a wall mounted grab bar for use with a bathtub or shower. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68616.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for concealed anchors.

Two Wall Tub / Shower Toilet Compartment Grab Bar (Models B-68137 & B-68137.99)

The Two-Wall Tub/Shower Toilet Compartment Grab Bar, models B-68137 and B-68137.99, is a wall mounted grab bar for use with a bathtub, shower or toilet. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts in a corner on two walls. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish (model B-68137.99 is peened). It has 3 concealed mounting flanges with a stainless steel plates and screw holes for con

Ultra Grip Bath Suction Handle (Model B200-00)

The Ultra Grip Bath Suction Handle, model B200-00, is a portable grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar has a visual activation indicator that shows when it is in place and properly adhered to a smooth flat surface. It has a support handle with dual locking suction cups and safety indicators. The suction grips hold tightly to any smoother, flat and non-porous surface. The unit can be used for travel or short-term situations. The indic

Universal Design Shower Floor (Models Fbf-3060L/r & Sbf-3060L/r)

The Universal Design Shower Floor, models FBF-3060L/R and SBF-3060L/R, is a roll-in shower floor designed for use by individuals who use wheelchairs. The floor has a pebbled, slip-resistant surface. It is available with a left- or right-hand drain and can be recessed for flush mounting or used with a ramp (not included). The floor is made of Veritek, a reinforced solid surface (model FBF-3060L/R) or from Swanstone solid surface (model SBF-3060L/R). Reinforced solid surface means color and textur

Universal Turner

The Universal Turner "Pigge" is a knob and tap turner designed for use by individuals with fine motor or grasping disabilities or arthritis. The device consists of a unit with retractable stainless steel pins attached to an L-shaped, latex-free plastic handle to increase turning leverage.When pressed against an irregularly-shaped item, knob or control, such as keys, dead bolts faucets, or stove controls, the retractable pins conform to and grip the object to be turned. The handle provides turnin

Vertical Grab Bar

Stainless steel 90 degree angle grab bar. 1, 1 1/4, or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Satin finish. Exposed or concealed mount, 16 by 32 inches high. Right or left.

Vertical Tub Safety Bar

The Vertical Tub Safety Bar is a grab bar for bathtubs designed for use by individuals with mobility and balance disabilities. This vinyl-coated steel rounded A-shaped bar clamps to the edge of most standard tubs with a screw clamp. Inner rubber pads protects the tub from scratches. COLOR: White.

Vitalize Walk-In Shower

The Vitalize Walk-In Shower is an accessible shower stall with fold-down seat designed for use by individuals with lower extremity or mobility disabilities, including arthritis. This barrier-free, low entry shower has a three panel entrance, with one fixed panel and two sliding panels that open to provide barrier-free access across 2/3 of the width of the shower. The door frames are trackless at the bottom providing a smooth and safe low threshold shower entry. The panels feature Aquatex designs

Volume Control.

Adjustable control for volume flow of water. Installed at faucet.

Walk In Tub / Shower Combination (Model Rn5)

The Walk In Tub / Shower Combination, model RN5. is an accessible shower bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub and shower combination system enables full standing showering or sitting on the built-in seat. The side door allows for low entry into a full-sized tub. OPTIONS: Surround wall. DIMENSIONS (LxW): 60 x 30 inches. COLOR: White.

Wall Brab Bar For Bath Tub (Model 3100K Series Type 17)

Stainless steel, wall mounted grab bars on 2 walls. On one wall, a horizontal bar 48 inches long continuing around adjoining wall with bar 24 inches long and vertical section 32 inches high. Mounted 32 inches above floor. 1 1/2 inches wall clearance. Peened finish for better grip, available in left or right models.

Wall Grab Bar For Shower

Stainless steel U shaped grab bar for shower stall wall. 1, 1 1/4 or 1 1/2 inch diameter, 1 1/2 inch wall clearance. Concealed or exposed mount. 26 inches wide, 32 inches high. Satin finish.

Wall Grab Bar For Shower (Model 3100K Series Type-12)

Stainless steel grab bars on 2 walls of shower. On one wall, a horizontal bar 36 inches long continuing around adjoining wall with bar 24 inches long and vertical section 24 inches high. Mounted 32 inches above floor. 1 1/2 inches wall clearance. Peened finish for better grip. Available for left or right. 18 gauge stainless steel.

Wall Grab Bar For Toilet

Stainless steel U shaped grab bar with extension between toilet and corner wall. 1, 1 1/4 or 1 1/2 inch diameter. Exposed or concealed mount. Satin finish. 24 inches long, perpendicular extension 30 inches. Right or left.

Wall Hung Cabinet (Model Wh18) & Wall Hung Slant Cabinet (Model Wh60S)

Wheelchair accessible lavatory cabinet. Wall hung, open under sink for access. Slanted cabinet design protects legs from pipes. Cabinet and doors are 5/8 inch particle board. Interior and exterior of cabinet faced with vinyl. Concealed hinges. Doors have cam locks and keys. Countertops are 3/4 inch particle board construction and are available with laminate or Corian. Backsplashes, endsplashes, and finished ends to be provided as ordered. Accessories: Towel dispenser and waste disposal doors set

Wall Mounted Handgrips

The Wall Mounted Handgrips are wall grab bars designed for use by individuals with balance or mobility disabilities. These grab bars are shaped like wide V's and can be installed vertically above bathtubs, in showers, and near toilets. Available in a single and double grip model, the units have a grooved inner surface for a secure grasp. Installation hardware and instructions are included. DIMENSIONS: The single model is 9.5 inches long and the double model is 17.25 inches long.

Wall Mounted Steel Grab Bars

The Wall Mounted Steel Grab Bars are wall grab bars designed to provide individuals with extra support in keeping their balance. The bars are made of polished steel and are appropriate for either vertical or horizontal positions. The bars come with brackets and chrome-plated screws and have be safety tested to 300 pounds. OPTIONS: Straight or 90 degree angle bars available. DIMENSIONS: 7/8 inch diameter; 1 1/2 inches from the wall; straight: 12, 16, 24, 32, 40 or 48 inches long. Angle: 16 x 16,

Wall Mounted Tub Rail (Model 2040)

The Wall Mounted Tub Rail ##2040 is a stainless steel grab bar for use in bathtubs. The support consists of an L-shaped bar designed for mounting in the corner of the walls of the tub area. This rail is available in 4 concealed and 4 exposed mounting styles, and can be mounted for either right or left handed use. DIMENSIONS: 36 x 48 inches with 1, 1.25, or 1.5 inch diameter tubing. Safety clearance is 1.5 inches. FINISH: Standard finish is Brushed Satin; optional finishes include non-slip safety

Wall Suspended Tub Rail (Model 1236)

The Wall Suspended Tub Rail ##1236 is a stainless steel wall mounted grab bar for bathtubs. The support consists of a U-shaped bar with 2 mounting points, and 2 L-shaped extension arms that are attached to the underside of the hand bar and mount to the wall. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 36, 40, 42, or 48 inch crosspieces; hand bar extends from wall 12 inches; extension arms are 8 x 12 inches. FINISH: Brushed Satin is standard; optional finis

Wall To Floor Bar With 3-Inch Extension (Model 3303-Wx)

The Wall to Floor Bar with 3-inch Extension ##3303-WX is a grab bar for use next to a toilet to give support and balance to persons who need it when standing or sitting. This is an L-shaped bar that extends below floor level an additional 3 inches. Manufacturer recommends use with concrete floors only. This grab bar is available in 4 concealed or 4 exposed mounting styles. DIMENSIONS: 33 (H) x 30 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Brushed Satin is standard; optional finish

Wall To Floor Grab Bar

The Wall to Floor Grab Bar is designed to assist individuals with balance or mobility disabilities by providing support while walking or standing/sitting.

Wall To Floor Grab Bar

Stainless steel floor to wall grab bar for toilet, with extension on wall behind toilet. 1, 1 1/4 or 1 1/2 inch diameter. Exposed or concealed mount. Satin finish. 30 by 30 by 24 inches wide, right or left.

Wall To Floor Grab Bar

Stainless steel floor to wall grab bar with sunken floor attachment. 1, 1 1/4 or 1 1/2 inch diameter, exposed or concealed wall mount, satin finish. 30 by 30 inches.

Wall To Floor Grab Bar

Stainless steel grab bar extends from wall to floor on one side of toilet, with 6 inch extension support at base. Section attached to floor is shaped 6 inches back from front edge. 1, 1 1/4 or 1 1/2 inch diameter. Satin finish. Exposed or concealed mount. 26 inches wide, 32 inches high. Right or left.

Wall To Floor Grab Bar For Bathtub

Stainless steel corner wall to floor grab bar for end of tub. 1, 1 1/4 or 1 1/2 inch diameter, 12 inch wall clearance. Concealed or exposed mount. Satin finish. 34 inches wide, 32 inches high. Right or left.

Wall To Floor Grab Bar With Socket End (Model 819388)

The Wall to Floor Grab Bar with Socket End, model 819388, is a wall to floor grab bar designed for use with toilets. It is intended for use by people with balance, lower extremity and mobility disabilities. This L-shaped grab bar mounts with one end terminating in a wall and the other in the floor. It is constructed of type 304 stainless steel 18-gauge tubing with a satin finish. It has concealed mounting flanges with a stainless steel plates and screw holes for concealed anchors. Stainless stee

Wall-Mounted Shower Stool

The Wall-Mounted Shower Stool is designed for use by individuals with balance or mobility disabilities. Attached to the wall, this unit folds against the wall when not in use. When pulled down for use, front supporting legs automatically drop into position. A positioning screw permits fine adjustment for use on sloping floors. Available with a solid seat or with a recessed opening to facilitate personal hygiene, the seat has an embossed surface that pushes water and soap solution away from the u

Wash Basin (Model 6465)

The Wash Basin is a portable sink designed for washing or soaking away from a bathtub. The basin is rectangular. DIMENSIONS (WxLxH): 9 1/2 x 12 1/2 x 4 inches. CAPACITY: 7 quarts.

Wash Basin Electric Bracket (Model R4928000)

The Wash Basin Electric Bracket, model R4928000, is a bracket to create a height adjustable bathroom sink. It has an electric motor with remote control, and is designed for mounting on a horizontal track. DIMENSIONS: When the bracket is mounted at the recommended height of 470 millimeters, the wash basin's height can be adjusted from 670 to 970 millimeters, measured from the floor to the top edge of the wash basin. The depth is 260 millimeters. COLORS: White, red, dark blue, grey, or turquoise.

Washlet Toilet Seat (Models C100, E200, & S300)

The Washlet Toilet Seat, models C100, E200, and S300, is a toilet bidet designed to provide independence and comfort for people with physical disabilities while toileting. The device consists of a toilet seat equipped to deliver a stream of aerated warm water for cleansing at the touch of a button on a side panel (C100) or remote control (E200, S300). Water pressure and temperature are adjustable. The remote control pad may be placed where it is most convient to the user. The heated seat with te

Waterstopper

The WaterStopper is a water dam for shower designed for use by individuals with mobility disabilities. This dam prevents wet floors outside a roll in shower while allowing the user to enter the shower in a wheelchair. The T-shaped dam is self-adhesive and sticks to a clean shower floor without epoxy or rubber adhesive. The three-piece kit includes two molded rubber end caps that fit showers from Best Bath Systems but can be used universally to match an existing shower. The kit also includes alco

Wavegrip Grab Rail System

Wavegrip Grab Rails are wall grab bars for installation in bathrooms and other areas where additional support is needed for persons with disabilities, children, or seniors. The grab bars are available in straight or bent (45- or 90-degrees) models. The bars feature a continuous "wave" pattern ergonomically designed to fit the contours of the hand. The tubing is made of aluminum and plastics that are permanently bonded to one another and finished with a polyamide surface finish. All parts are eas

Wavegrip Grip Pieces

The Wavegrip Grip Pieces are wall grab bars for use in bathrooms around the toilet, in the tub or shower, or in other areas where secure support may be needed for persons with disabilities, seniors, or children. The grip pieces are modular units that may be combined to fit any room, including interior and exterior corners. Different configurations and lengths of handrails may be designed with two models: straight pieces for extension, and open-ended pieces with one wall mount. The tubing feature

Wavegrip Support Grips

The Wavegrip Support Grips are wall grab bars for use in the bathroom or other areas where support is needed for persons with disabilities or seniors to have a secure hand hold. The U-shaped grips are available in a rigid or folding version. For the swivel mechanism of the folding version, an adjustable brake prevents unwanted folding down of the unit in all positions. The ergonomically designed tubing has a continuous "wave" pattern that fits the contours of the hands. The supports are made of

Wheelchair Accessible Shower Threshold (Model 8452A)

The Wheelchair Accessible Shower Threshold, model 8452A, is a shower threshold ramp designed for use in wheelchair-accessible showers. The solid neoprene gasket keeps water in while allowing wheels to pass over by compressing the neoprene. DIMENSIONS (HxW): 1.25 x 1.75 inches; height is reduced to 0.278 inches when compressed by wheels.

Wheelchair Cabinet Combo

The Wheelchair Cabinet Combo is an accessible vanity cabinet designed for use by people with mobility or lower extremity disabilities or spinal cord injury and other who use a wheelchair. This cabinet is intended to be used with a 21-inch deep counter. Each model features a recessed, angled cabinet that provides space for the feet of a wheelchair user so he or she can pull up to the counter edge. It is available with a standard cabinet with or without a drawer on top on one or both sides of rece

Wheelchair Lavatory (Models 051-2961, 051-2964, & 051-2968)

The Wheelchair Lavatory, models 051-2961, 051-2964, and 051-2968, is an accessible sink designed for use by individuals who use wheelchairs. This china sink is held with a concealed arm carrier (not included). OPTIONS: Chrome wheelchair lavatory drain (model 803-0530) with 1.25-inch OD tailpiece. DIMENSIONS (LxW): 20.5 x 27.25 inches, with faucet holes on 4-inch centers (model 051-2964) or 8-inch centers (model 051-2968).

Wheelchair Vanity Cabinet

The Wheelchair Vanity Cabinet is an accessible vanity designed for use by people with mobility or lower extremity disabilities or spinal cord injury and other who use a wheelchair. This vanity has a 21-inch deep counter with a recessed, angled cabinet underneath that provides space for the feet of a wheelchair user so he or she can pull up to the counter edge. It is available in 8 widths with 2, 3, 4 or 5 cabinet doors (more doors are available with increasing widths). All sizes are available ma

White Bathtub Rail

The White Bathtub Rail is a grab bar for the bathtub designed for use by individuals with mobility disabilities. The wide contact area of this rail helps disperse the weight evenly. This rail is suitable for use on fiberglass tubs. It attaches to the tub with a mounting clamp. DIMENSIONS (HxDxW): 13.5 x 1 x 7 inches. The clamp adjusts from 2.5 to 5 inches in unlimited increments. COLOR: White

Wingits Refined Engineered Safety (Res) Grab Bar System

The WingIts Refined Engineered Safety (RES) Grab Bar System is grab bar installation hardware designed for mooting grab bars for use by individuals with balance or mobility disabilities. Made of stainless steel and fire- retardant structural plastic, this mounting hardware can be used in all hollow wall framing and tub surrounds. It is waterproof, requires no caulking, and is not loosened or affected by directional forces. It supports WingIts grab bars and grab bars from other manufacturers. The

Wipe Assist

Wipe Assist is a product designed for individuals who have limited upper body mobility and find it difficult to adequately wipe themselves or for persons that cannot turn their torso and/or reach around in order to fully wipe themselves. Made especially for individuals with grasping, neurological, reaching, or upper extremity disabilities. The device is designed to hold toilet paper 16 inches out from where the user can reach. Wipe Assist allows users to wipe independently and without assistance

Worthington Barrier-Free Lavatory (Model 442038)

The Worthington Barrier-Free Lavatory, model 442038, is an accessible sink designed for use by individuals who use wheelchairs. This lavatory sink is wall-hung, leaving the space below the sink open for wheelchair access. The large sloping basin ensures that water remains in the sink. The sink is made of Grade A vitreous china, drilled with 8-inch centers, and it can be installed with concealed arm carriers. DIMENSIONS (HxDxW): 12 3/8 x 21 x 22 inches. WARRANTY: Limited 5-year warranty.

Wrist Blade Handles (Model 98-879)

The Wrist Blade Handles, model 98-879, are lever faucet handles designed for use by individuals with grasping or upper extremity disabilities. These blade type lever handles enable a person, who would not otherwise be able to use conventional handles, to turn water on and off. Wrist or elbow could be used rather than the hands. Handles come in sets of two. COLOR: Chrome.

Wristblade Handles (Model 317-Prjkcp)

Wristblade Handles, model 317-PRJKCP, are dual blade lever faucet handles designed to allow greater access to persons with limited hand dexterity or strength. Handles come in a pair with color coded buttons for hot and cold water. DIMENSIONS: Each blade is 4 inches long. COLOR: Chrome finish with red button for hot water control handle and blue button for cold water control handle.

Wynd 816 High Spout Widespread Lavatory Set - Lever Handles

The Wynd 816 High Spout Widespread Lavatory Set -Lever Handles is a set of two lever tap handles and a high spout designed for use by individuals with grasping or upper extremity disabilities. The set includes a cast brass spout and side valves, two lever handles, a ceramic disc valve cartidge, a flexible hose for 6 to 12 inch installations, and a 1.25-inch drain assembly. COLOR: Brushed nickel, diamond, old bronze, or platinum nickel finish.

Zoe Dolphin Vl Shower System

Zoe Dolphin Vll Shower System is a showerhead on an adjustable bar and a handheld showerhead, designed for use by individuals with mobility disabilities. The system allows the user to shower with the showerhead on its adjustable slide bar or with the handheld showerhead or both at the same time. The system includes a four-position shower head on a shower slide bar, and a four-position handheld shower head on a hose. Also included are a wall supply elbow, a vacuum breaker, and a Moentrol shower

Zoe Folding Handicap Shower Seat (Model 410281)

The Zoe Folding Handicap Shower Seat, model 410281, is a folding shower seat designed for use by individuals with mobility, balance, or lower extremity disabilities or arthritis. The seat is anchored to the shower wall and folds up when not in use. It is constructed of stainless steel with a phenolic slatted seat. CAPACITY: 300 pounds.

Zoe Mariner Ll Pressure Balancing Shower Faucet System

The Zoe Mariner ll Pressure Balancing Shower Faucet System is a lever-handle shower faucet with a showerhead on an adjustable bar and a handshower on a flexible hose, designed for use by individuals with mobility disabilities. The system has a pressure-balancing valve to prevent scalding. The Showerhead and handheld body shower both have four spray settings. A diverter valve controls water from shower head to handheld sprayer. Fixtures are made of brass. A soap tray is also included. DIMENSIONS:

Zoe Sterling Roll-In Wheelchair Shower Stall (Model 6202)

The Zoe Sterling Roll-In Wheelchair Shower Stall, model 6202, is an accessible shower designed for use by individuals in wheelchairs. The stall includes a base, two end walls, and a back wall. The back wall has built-in shelving and a towel bar. The stall is made of solid Vikrell material with color molded throughout and a lightly textured swirl-gloss finish. The bottom of the stall is lightly pebbled for better traction and safer footing. DIMENSIONS (HxDxW): 72 x 36 x 34 inches. COLOR: Almond o

Zoe Voyager Hand Held Shower Head

The Zoe Voyager Hand Held Shower Head is a handshower with flexible hose designed for use by individuals with mobility disabilities. This showerhead has four intensity positions (pulsating, massage, full soft spray, and hard stream) and comes with a shower arm and matching flange, a heavy duty hose, a solid metal swivel bracket, and Teflon tape. OPTIONS: Control valve; shut off valve; pause control; brackets; diverter; slide bar; shower hose; and massage attachment. DIMENSIONS: Hose is 59 inches

 
Processing...


Driving Walking/Biking Public Transit  Get Directions