Cane Accessories

Results: 70

Able Tripod Base

The Able Tripod Base is a cane tip designed for use by individuals with walking disabilities or arthritis. This rubber tripod tip replaces the existing rubber tip on a cane, allowing the cane to be self-standing and providing increased traction on most terrain, including sand, grass, gravel, and boardwalks. The pods flex as the user walks, reducing impact on the hand, wrist, and elbow. DIMENSIONS: Models are available to replace 5/8-, 0.75-, 7/8-, and 1-inch cane tips.

Ableware 703170000 Mobility Plastic No-Wire Walker Basket by Maddak

This no-wire walker basket is meant for walker users. The basket firmly attaches to the horizontal and vertical bars of the users walker. Its flexible, virtually indestructible, retractable stabilizing arms lock onto the legs of the walker and eliminate excess swinging. The front of the basket features a slot for an identification tag and the bottom of the basket has a built-in glass, can or cup holder, a smaller compartment for coins or medications and a trough for utensils, pens, straws or eye

Ableware 703200050 Walker Bag Hook by Maddak

Creates a convenient spot on a walker to hang a bag or purse. Simply attach the clamp around the walker and hang a purse or bag on the hook. Can also be used on most standard bed rails. Clamp can be adjusted to accommodate tubing diameters of 1/2 to 1 1/8" (1.27 - 2.9 cm).  

Ableware 703240000 Cane/Crutch Holder

 The Cane/ Crutch Holder is designed for those who use a cane. This holder clips onto the cane so it can hang from the edge of any table, desk, or counter. The user can also stand the cane on the floor next to a table and slide the clip up until it wedges against the underside of the table. A foam rubber pad on each side of the clip keeps it in place. 

Ableware 703240050 Cane/Crutch Holder-2/Bag

The Cane Cruth Holder- 2 is designed for people who use a cane. Is a small plastic fitting that mounts on a cane to hold it on a table edge when not in use. Snaps onto the cane and slides up or down to contact the top or bottom of the table. Can be used in pairs to contact both the bottom and top of a table. A small rubber band is placed around the end hooks to maintain a better grip on the cane shaft.

Ableware 703250002 Metal Cane Holder for Walkers/Wheelchairs by Maddak

The Metal Cane Holder for Walkers/Wheelchairs is designed to assist cane users carry it everywhere. This double-clip cane holder allows users to keep a cane handy wherever they may need it. The users snaps one side of the clip onto any tubular structure such as a table leg, walker, commode, wheelchair or lawn chair. The opposite side of the clip holds almost any size cane. The gripping surfaces are soft plastic rollers and will not damage canes.  

Ableware 703260000 Cane Hand Loop

The Cane Hand Loop is designed for people with disabilities that use a cane. One end wraps around the cane/walking stick shaft while the larger loop on the opposite end slips around the wrist. Even if the cane falls out of the hand, it won t drop to the ground. Made of  polypropylene webbing.

Ableware 703270000 Hand Band Grip Enhancer-Small-2/pack

Gives people with limited grip and hand strength additional control of walkers and canes. Band attaches to the handgrips of the walker or the cane shaft using hook-and-loop fastener. The user places the fingers in the band creating an enhanced grip. The elasticity in the band provides greater control and ensures a secure grip. Also useful for products that require a firm grip and swinging motion such as gardening tools, brooms and mops.  

Ableware 703290001 Crutch Bag-Vinyl-Black

Crutch Bag-Vinyl-Black  bag is designed to make it easier for users to carry personal items while using crutches. The deep pocket provides room to hold a cell phone, keys, wallet, etc. It attaches to the side of the crutch and does not interfere with any movement. Machine wash, air dry. 

Ableware 703340010 Quilted Folding Cane Bag w/ Strap

The Quilted Folding Cane Bag w/ Strap is intended for people who have a cane. It is a bag with sufficient space to carry a folded cane. The quilted inside is designed to protect the cane.   

Adjustable Flashlight Cane

The Adjustable Flashlight Cane is an adjustable straight cane designed for use by individuals with walking or balance disabilities. This cane features a T-shaped wooden handle with a built-in rear flashing light and a height-adjustable aluminum shaft. The cane also has a secret built-in storage compartment. POWER: The flashlight uses two triple-A batteries (not included). DIMENSIONS: The height adjusts from 30 to 39 inches. COLOR: The handle is faux burled walnut and the shaft is available in a

Black Tips

The Black Tips are cane tips designed for replacement of the worn tips on wooden canes. These tips are made of one hundred percent natural rubber and are metal reinforced for skid-resistant traction. DIMENSIONS: Available to fit 5/8-, 0.75-, 7/8-, and 1-inch diameter wood canes.

Brown Cloth Cane Bag With Draw String

The Brown Cloth Cane Bag with Draw String is a carrying bag for a cane designed for use by individuals with lower extremity,mobility, balance and walking disabilities who use canes. Made of cloth, this bag features a draw string closure at the top to store the cane or to protect the cane from the elements when stored in the back seat of a car when traveling. DIMENSIONS: Fit canes up to 36 inches long. DIMENSIONS: Maximum length is 36 inches. WEIGHT: 0.2 pounds. COLOR: Brown.

Cane / Crutch Bag (Model 70220)

The Cane Bag, model 70220, is a carrying bag for all single shaft canes and crutches. This lined bag is made of coated nylon and attaches with adhesive Velcro. The caddy features a spring-action hex frame opening which is opened by simply placing the fingers in the middle of the frame and popping it open, and closed by pushing on the outside of the frame. Opening and closing the bag does not require manual dexterity or strength. DIMENSIONS (WxHxD): 8 x 5.25 x 2.25 inches. COLOR: Royal blue, mage

Cane / Crutch Holder (Model 70324)

The Cane/Crutch Holder, model 70324, is a spring-loaded clip designed to grip any cane or crutch to a table, desk, or counter. The clip has a foam rubber pad on each side to keep it in place. The holder will accommodate shafts from 5/8-inch to 1-inch in diameter.

Cane Black Leather Holster With Belt Clip

The Cane Black Leather Holster with Belt Clip is a cane holder designed for use by individuals with walking or balance disabilities who use canes. This closed sleeve cane holder complete with clip accommodates four or six section folding canes. The holder secures the cane to the belt of the user's pants allowing freedom of both hands. DIMENSIONS: The holder is 13.5 inches long.

Cane Clamp

The Cane Clamp is a cane holder designed for use by individuals with mobility disabilities. This plastic clamp attaches with the included plastic screw to shelves, the edges of tables and desks, etc. to keep the cane upright and in reach. DIMENSIONS: The clamp attaches to surfaces up to 1 1/8 inch thick and accepts canes up to one inch in diameter.

Cane Clip (Model 70327-0007)

The Cane Clip, model 70327-0007, is a cane holder with an adhesive pad for attachment to any flat vertical surface. The base also has two screw holes for permanent mounting to the edge of a desk, wall, cabinet, or other surface. The clip will accommodate canes up to 1 inch in diameter. Sold in packages of 6. DIMENSIONS: 2 7/8 x 13/16 inches; projects 1 7/8 inches from the surface.

Cane Clip With Table Clamp (Model 70325-0001)

The Cane Clip with Table Clamp, model 70325-0001, is a cane holder designed to accommodate any size cane securely, while allowing easy release. The device has a spring-action clamp with grooved, soft plastic rollers that will not mar the cane's shaft. The rubber-lined clamp fits onto table tops or counters up to 1.75 inches thick and is secured by a clamping screw with a swivel glide. DIMENSIONS: 3.75 x 3.5 x 2 inches.

Cane Hand Loop (Model H70326)

The Cane Hand Loop, model F70326, is a wrist strap designed to prevent cane users from dropping their ambulation aid. The strap has a Velcro fastener which wraps around the cane shaft and slips over the wrist.

Cane Handle

DO IT YOURSELF ENTRY --- PURPOSE: To provide a better grip for a cane user. A standard aluminum cane with a crook handle has a small diameter slippery plastic handle. To provide a wider, more secure grip, the handle was wrapped with standard tennis racquet handle tape. TITLE: The Cane Handle. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/handke1.htm. REF: The originator, Benjamin Lewit, can be contacted at lewit@seas.gwu.edu.

Cane Holder

The Cane Holder is designed for use by individuals with mobility disabilities. This device snaps on to the cane shaft and slides over the edge of a table or counter or similar surface, enabling the user to hang the cane within reach. DIMENSIONS: Holds canes up to 7/8-inch in diameter. COLOR: Black or black and white.

Cane Holder (Model 70325-0002)

The Cane Holder, model 70325-0002, is a double-clip holder that allows a cane or crutch to be suspended or secured against any tubular structure such as a table leg, walker, commode, wheelchair, or lawn chair. The non-marring, plastic clips have grooved gripping surfaces. DIMENSIONS: 3 x 2 x 1.75 inches.

Cane Holder (Model O113)

The Cane Holder, model 0113, is designed to stabilize crutches or canes against a counter or table when not in use. The small unit clips onto the cane/crutch at any height, and the holder rests on the edge of any horizontal surface to balance the cane/crutch by gravity.

Cane Replacement Tips (Models T10034, T10058, & T10078)

The Cane Replacement Tips are cane tips designed for use with most straight and offset canes. Sold in sets of two, these rubber tips are lined with a metal washer for longer wear. DIMENSIONS: Model T10034 fits canes with 0.75-inch hafts, model T10058 fits canes with 5/8-inch shafts, and model T10078 fits canes with 7/8-inch shafts. COLOR: All models are available in grey or black.

Cane Stay

Cane Stay is a cane holder designed for use by individuals who use canes. This device fits any standard cane to keep it upright, whether resting on a table edge or leaning gainst a wall. Made of strong plastic, the unit will not slip once attached to the cane. DIMENSIONS (HxLxW): 0.7 x 3 x 4 inches. GUARANTEE: 90-day satisfaction guarantee.

Cane Strap

The Cane Strap is a wrist strap for a cane designed for use by individuals with walking or balance disabilities. The soft nylon loop attaches to most wood and aluminum canes with an elastic loop and the strap fits around the user's wrist. COLOR: Black.

Cane Tip - 1-inch Diameter - Black

 The Cane tip is designed for individuals who use a cane for walking support. Drive Cane tip fits all canes and crutches with 1-in diameter.

Cane Tip For Sand

CUSTOM ADAPTATION PURPOSE: To enable an individual who has had a stroke to walk in on the beach with a cane. The user found walking on the beach difficult because the cane tip sank into the sand. The solution was to use a cane tip of the type used by lawn bowlers. This tip consists of a standard rubber cane tip fixed to a wide circle of plastic, enabling the tip to stay on top of the sand. TITLE: Beach Advice. JOURNAL: TAD Journal. REF: Volume 25, Number 4, Summer 2005. PAGES: 7. Number of page

Cane Tips (Models 40850-4, 40851-4, 40852-4 & 40853-4)

The Cane Tips are designed to replace the existing tips on straight, offset, and quad canes. These rubber tips have metal reinforcements. DIMENSIONS: Model 40850-4 fits canes 1 inch in diameter. Model 40851-4 fits canes 7/8 inch in diameter. Model 40852-4 fits canes .75 inch in diameter. Model 40853-4 fits canes 5/8 inch in diameter. COLOR: Black.

Cane Valet

The Cane Valet is a cane holder designed to allow canes to be hung from the edge of a desk or table or to be wedged under the edge of a desk or table. This small square device snaps on to the shaft of most canes and a small rubber band placed around the end hooks maintains a secure grip.

Cane With Flashlight

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create a cane with an attached flashlight for individuals with balance, lower extremity, mobility and walking disabilities. To start, make two holes in a plumbing clip and then pass the wire through them to create a loop in which the flashlight fits securely. When the wire loop is complete, make sure that the clip fits the cane. To attach the flashlight to the clip assembly, apply pressure to the wire as the flashlight is inserted to keep the flashl

Carex Enablers Cane Holder (Model En13Crd)

The Carex Enablers Cane Holder, model EN13CRD, is a cane holder designed to keep canes upright and within reach. Comprised of an oval base with two gripper fingers, this plastic holder features self-adhesive tape on the back for application where needed. DIMENSIONS (HxDxW): 1.5 x 1.5 x 2.31 inches.

Crutch And Cane Holder (Model 92)

The Crutch and Cane Holder, model 92, is designed to mount to the back of a wheelchair. The device features a strap and buckle at the top and a cup attached to the tipping lever to secure the crutches or cane.

Crutch And Cane Rack (Model 790)

The crutch and cane rack is constructed of ash hardwood and is equipped to hold up to 30 crutches and 10 canes. The mounting hardware is not supplied. DIMENSIONS (LxH): 60 x 17 inches; rod extensions are 15.5 inches from the wall.

Easy Klaw

The Easy Klaw is a cane or crutch holder designed for use by individuals who use canes. This unit turns any flat surface into a convenient support stand. Set the unit on the edge of a flat surface and it sticks in place, ready to hold and the extra-wide opening provides access for larger diameter items, including crutches. The rubberized grip does not slip or scratch. DIMENSIONS (WxDxH): 3.5 x 4 x 1 inch. WEIGHT: 12 ounces.

Five Cleat Ice Pick For Canes

The Five Cleat Ice Pick for Canes is an ice gripper designed to prevent the cane from sliding on ice, snow, or slush. This plated steel attachment has five points for stability and clamps to canes using the included screws. Squeezing the two plastic knobs together allows the attachment to swing into position and lock in place. When not in use, the attachment can be flipped up into a retracted position to expose the rubber cane tip for regular use. DIMENSIONS: Fits canes from 5/8 to one inch in d

Flashlight And Attachment (Model Fl-1000)

The Flashlight and Attachment, model FL-1000, is a cane, walker and wheelchair light designed for use by individuals who use walkers, canes, and wheelchairs. The light attaches to any tube product with a diameter of .875 to 1 inch. It comes with a wrist strap and a clip that pivots 360 degrees to change the direction of the light. The light can also be detached from the clip for use as a flashlight. This light can also be used with bicycles and baby strollers. No tools are required for attachmen

Foam Offset Cane Replacement Handles (Series W1340)

Foam Offset Cane Replacement Handles are foam grips for offset canes designed to replace worn grips. Sold individually, these grips slip over the cane handle and fit most offset cane models. COLOR: Model W1340-FHBL is black, model W1340-FHBR is bronze, and model W1340-FHS is silver.

Folding Adjustable Flashlight Cane

The Folding Adjustable Flashlight Cane is a folding adjustable straight cane designed for use by individuals with walking or balance disabilities. This cane features a T-shaped wooden handle with a built-in rear flashing light, a height-adjustable aluminum shaft, and a secret built-in storage compartment. When not in use, this cane folds for storage in the included zippered nylon pouch. POWER: The flashlight uses two triple-A batteries (not included). DIMENSIONS: The height adjusts from 33 to 37

Folding Cane Bag

The Folding Cane Bag is a carrying bag for canes designed for individuals with walking, mobility or balance disabilities. Designed to protect folding canes when not in use, this quilted bag has an arm loop strap and magic-cling closure. DIMENSIONS (LxW):14.5 x 6.5 inches. COLORS: Red and black.

Folding Cane Storage Bag

The Folding Cane Storage Bag is a carrying bag for canes designed for use by individuals with lower extremity, mobility, balance or walking disabilities and others who use canes. Designed to protect a folding canes when it is not in use, this water resistant canvas bag has a top flap secured with durable Velcro closure. The top of the flap features a small clear window pocket to a business card or identification information while traveling. An additional strap is on the back of the bag for easy

Folding Cane Travel Bag

The Folding Cane Travel Bag is a carrying bag for canes designed for use by individuals with mobility, balance and walking disabilities who use a cane. Designed to protect folding canes when not in use, this quilted bag features a zippered closure and carrying strap. The bag is made of a polyester and cotton blend fabric that is machine washable. DIMENSIONS (LxW): 12.5 x 7 inches. COLORS: Blue or burgundy.

Gray Tips

The Gray Tips are walker and commode tips designed for replacement of the worn tips on commodes, canes, or walkers. These tips are made of one hundred percent natural rubber and are metal reinforced for skid-resistant traction. SIZES: Aluminum and quad cane tips fit tips 5/8 inch in diameter. The cane tips fit tips 0.75 inch in diameter. The walker and commode tips fit tips 1 1/8 inch in diameter.

Ingrid Cane Holder

The Ingrid Cane Holder is a cane holder designed for use by individuals who use canes. Made of Santoprene thermoplastic rubber with a stainless steel spring, this device snaps on to most canes and is equipped with both a hook and a prop to allow the cane to hang from a chair, table, counter, shopping cart, etc.

Keen Adventure Crutch / Cane Tip

The Keen Adventure Crutch/Cane Tip is a replacement cane or crutch tip designed for use with Keen Navigator crutches and most standard canes and crutches. These tips flex 30 degrees for added stability. DIMENSIONS: Fits tips 0.75 to 7/8 inches in diameter. The diameter of the base is 2 inches and the tip is 3 inches high. WEIGHT: 3.6 ounces. COLOR: Black, blue, yellow, orange, or red.

Keen Adventure Mini Cane Tip

The Keen Adventure Mini Cane Tip is a replacement cane tip designed for use with quad canes and other canes. These tips pivot for added stability. DIMENSIONS: Fits cane tips 0.5 to 5/8 inches in diameter. The tip is 1.5 inches in diameter or 2 inches high. WEIGHT: 1.6 ounces. COLOR: Black, blue, yellow, orange, or red.

Ladies Soft Touch Derby Cane

The Ladies Soft Touch Derby Cane is a straight cane designed for use by women with walking, balance, or lower extremity disabilities. This cane has a hardwood shaft, a narrower textured soft-touch derby-style handle and a rubber suction grip tip with a steel insert. DIMENSIONS: 36 inches long (can be cut to desired length). COLOR: Brown handle with metallic anthracite/gold/scorched cherry stained shaft and a brass accent ring or silver handle with metallic dark silver/shiny black shaft and chrom

Mobility Clutch And Pouch

The Mobility Clutch and Pouch is a carrying bag that can be attached to canes, crutches or walkers, a wheelchair side pouch, or a bed pouch. This pouch carries items such as keys, money, and medications and attaches with Velcro to mobility aids and bed rails. This clutch has a removable carrying strap and an outside pocket for glasses or a cell phone. COLOR: Black, red, or pink.

Omhu Cane Dock

The OMHU Cane Dock is a cane holder designed for use by individuals with balance, lower extremity, or walking disabilities who use canes. The user can hang a cane on this wooden knob to store the cane when not in use. It accommodates all OMHU canes. This holder is made of painted birch wood and wall mounting hardware is included. COLOR: Tangerine, grass green, or natural.

Parsons Clip On Cane Holder (Model 14A029)

The Parsons Clip On Cane Holder, model 14A029, is a lightweight cane holder designed for use by individuals with walking or balance disabilities who use canes. The cane holder secures the cane to the belt of the user's pants allowing freedom of both hands. The clip has a sturdy steel clip, clear Lexanbacking, and hook and loop webbing. DIMENSIONS: (LxW): 2 x 3 inches.

Quad Cane Replacement Tips (Models T50012 & T50058)

The Quad Cane Replacement Tips are cane tips designed for use with most quad canes. Sold in sets of four, these rubber tips are lined with a metal washer for longer wear. DIMENSIONS: Model T50012 fits canes with 0.5-inch shafts and model T50058 fits canes with 5/8-inch shafts. COLOR: All models are available in grey or black.

Replacement Offset Cane Wrist Strap (Models 1340-Sbl & 1340-Sbr)

The Replacement Offset Cane Wrist Strap is a wrist strap for canes designed for use by individuals with walking or balance disabilities. This strap attaches to the front of most offset cane handles and fits most brands. COLOR: Model 1340-SBL is black and model 1340-SBR is bronze.

Round Mobility Clutch

The Round Mobility Clutch is a carrying bag designed for use by individuals with lower extremity, mobility, balance and walking disabilities. This oval carrying bag attaches to most canes, walkers, crutches, and wheelchairs or transport chairs with two hook-and-loop straps. The bag has an outside easy-access pocket that features an elasticized top and an interior zippered pocket for storing items such as keys, cell phones or other small items. The bag easily detaches and can be worn on the wrist

Safe-T-Grip Crutch Or Cane Tip (Model 635)

Rubber cane tip with metal disc at base of shaft cavity. For 1/2 to 5/8 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 3/8 to 1/2 inch shafts base diameter 1 1/8 inch; height 1 3/4 inch. For 1/4 to 3/8 inch shafts base diameter 7/8 inch; height 1 1/4 inch.

See 4 Safety Mobility Light

The See 4 Safety Mobility Light is a small light designed for people with low vision and others that may need assistance navigating in low light conditions. Attaches to any size walker, rollator, or cane tubing. Senses both low light level and motion and automatically turns on and off.

Self-Standing Cane Tip

The Self-Standing Cane Tip is a cane tip designed to replace standard quad cane tips with 3/4 and 7/8 inch cane shafts. Made of sturdy rubberized material, this cane tip has a wide base allowing the cane to stand by itself. DIMENSIONS (HxDxW) 2.65 x 4.75 x 4.75 inches. WEIGHT: 0.62 pounds. COLOR: Black.

Smooth Rubber Tips

The Smooth Rubber Tips are cane tips deigned to replace lost or worn cane tips. These tips are non-slip. DIMENSIONS: Available in 5/8- or 0.75-inch. COLOR: Black, grey, brown, or blue.

Sparkle Cane And Crutch Tips

The Sparkle Cane and Crutch Tips are cane and crutch tips designed for use by individuals who use canes or crutches. These tips are designed to glow in the dark. DIMENSIONS: These tips fit canes and crutches that are .75 inches in diameter. COLOR: Blue, green, pink, or tan.

Tapestry Folding Cane Bag

The Tapestry Folding Cane Bag is a carrying bag for a cane designed for use by individuals with balance, walking or lower extremity disabilities. This bag features a secure zip closure, a smooth lining, and a strap for carrying. DIMENSIONS (LxW): 12 x 7 inches; strap is 20 inches long and extends 9 inches above the top of the bag. COLOR: Tapestry print.

Ultratip

The UltraTip is a cane, crutch, or walker tip designed for use by individuals with walking, lower extremity, or balance disabilities. Made of a special soft material, these tips are designed to last four to ten times as long as traditional tips. The design provides 100 percent touchdown elasticity and a firm grip and enables the tip to flex to maintain ground contact. DIMENSIONS: Available in .75-inch or 5/8-inch. COLOR: Blue, white, red, black, violet, yellow, or silver.

Vehicle Cane Holder

The Vehicle Cane Holder is a cane holder designed for use by individuals who have balance, walking, or lower extremity disabilities. This polyester holder attaches to a motor vehicle's front seat headrest with an adjustable strap and hangs down the back of the seat. It has two pockets, one deep and one shallow. The deep pocket can hold a cane, umbrella, or window scraper. The shallow pocket can hold a folded compact umbrella. There is a third pocket designed to catch drips from wet umbrellas. DI

Velcro Straps For Folding Canes

---- “DO IT YOURSELF” ENTRY ------- PURPOSE: Modify a folding cane or folding crutch so that it stays folded. The Velcro straps are made from sticky back Velcro which can be obtained at any craft, sewing, hardware store, or online. INSTRUCTIONS: The Velcro has two parts to it, the fuzzy end and the spiky rough end. The adhesive back of the rough end will be what to stick to the upper part of the barrel of the cane. For a cane that folds in two, that is a 3 inch circumference, which require

Wheelchair Cane Clip (Model 16C102)

The Wheelchair Cane Clip, model 16C102, is a cane holder designed for use by wheelchair or walker users. One side of the clip can be locked onto a wheelchair using the rubber ring system (included), while the other side is plastisol coated to grip canes, reachers, and other similar devices.

Winter Grip (Crown) (Model Sw2335)

The Winter Grip (Crown), model SW2335, is an ice gripper designed for use on canes, crutches, or walkers. This hardened steel device clamps to the shaft of the cane and has five sharp points to grip ice. The tip flips up and out of the way when not in use.

Winter Grip (Single Point) (Model Sw2330)

The Winter Grip (Single Point), model SW2330, is an ice gripper designed for use on canes or walkers. This hardened steel device clamps to the shaft of the cane and has a single sharp point to penetrate ice. The tip flips up and out of the way when not in use.

Wrist Strap

The Wrist Strap is a wrist strap for canes designed to enable individuals with mobility disabilities to keep their canes from falling. This strap slips over the shaft of most wooden and aluminum canes and has an attached wrist loop. The loop can also be used to hook canes to wheelchair push handles or bedposts.

Wrist Strap For Cane (Model 14A022)

The Wrist Strap For Cane, model 14A022, is a wrist strap designed for use by walking cane users. The wrist strap features a soft webbing loop that attaches to the handle of the cane with a Velcro band.

Wrist Strap With Snap-Off Clip

The Wrist Strap with Snap-Off Clip is a wrist strap for a cane designed for use by individuals who use canes. This strap has features a wrist loop and a clip-on smaller loop to connect it to the cane. DIMENSIONS: The wrist loop is 8 inches. COLOR: Brown or black.

Wrist Straps For Sticks.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wrist strap to suspend a cane from the wrist. Describes two styles of wrist straps: strap and seizing, where a leather strap is bound to the cane with seizing; and the Turk's Head, with stout cord fashioned into a knotted strap. Includes photographs and detailed drawings. SKILLS REQUIRED: Assembly. AUTHOR: Grainger, S E TITLE: Making Aids For Disabled Living REF: North Pomfret, Vermont: Batsford: p 42-44 NARIC CALL NUMBER: R1126 PAGES ( including cover

 
Processing...


Driving Walking/Biking Public Transit  Get Directions