Wheeled Mobility

Results: 1947

RMB EV Multi-Point electric scooter

Designed for those who are not confined to a wheel chair.  Flat floor deck makes for easy mounting and higher seat allows for eye to eye contact with other people. Up to 30 mile range and fits through standard size door ways. Foldable handle bars and quick swap removable battery pack allows for easy transporting.The Multi-Point has reverse, horn, emergency brake, and the super popular USB ports to allow charging of cell phones and tablets while on the go.

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)

The "T" Tube-Plate Assembly Weldment is headrest accessory interface hardware designed for positioning an Occipital Angle Bar or an Occipital "T" Bar on a wheelchair. The "T" Tube-Plate Weldment attaches to the rear of the occipital bar and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. DIMENSIONS: Available in 4- or 6-inch lengths. COLOR: Available in black and stainless steel.

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or

"z" Tray Slide Bracket Attaching System (Model 32799)

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)

The 10 Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 10-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

10-Inch Scooter Bag (Model 70300)

The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch. Opening the caddy requires placing the fingers in the middle of the frame and popping it open; closing the frame is achieved by pushing on the outside of the frame. Very little manual dexterity or strength is required to operate the opening. The bag is made of coated

13-Inch Armrest Bag (Model 70320)

The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips. This lined bag is made of coated nylon Cordura and features a spring-action hex frame opening. Opening the frame requires placing the fingers in the middle of the frame and popping it outward; closing the frame is achieved by simply pushing on the outside of the frame. Very little manual dexterity and strength are needed to operate.

13-Inch Sling Bag

The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users. The caddy is large enough to hold many daily needed items such as medicines, personals, writing instruments, paper, etc. The bag comes standard with a main compartment, pen and pencil pouch, and a small front pouch. The bag features a spring-action, hex frame opening which can be opened by placing the fingers in t

2 Wheelchairs Accessible 4-Seater Picnic Table

This product is designed for persons in wheelchairs. It is a 4-seater picnic table. Has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

3G Arrow Rear Wheel Drive Power Wheelchair With Truetrack

The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla

3Rd Hand Small Electronics Mount

The 3rd Hand Small Electronics Mount is an extension arm for wheelchair accessories designed for use by individuals with mobility or neurological disabilities or spinal cord injury. The standard mount comes with a three-segment support arm, a ball base for attachment to the wheelchair or other surface, and a head plate surface for holding small electronics such as a cell phone, iPod, camera, PDA, miniPC, or adaptive switches. The head plate has an AMPS-NEC compatible head plate hole pattern. Ite

4 D Lapboard Adjustable Bracket Mount (08-3000 Series)

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00). Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch ABS plastic, 1/4 inch lexan, cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

4Wd Permoveh Wheelchair

---- PROTOTYPE --------- PURPOSE:The 4WD Permoveh Wheelchair or the Personal Mobility Vehicle, is a prototype for the next-generation wheelchair. The Permoveh has four wheels of the same size, and each wheel contains 32 rollers that can rotate in a perpendicular direction to the rim. The vehicle can move in any direction when the user operates a hand-held control. When the user wants to travel forward or back, the wheels alone move; when going sideways, the rollers move. When traveling diagonall

6-Seater Picnic Table- Fits 1 Wheelchair

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. Shipping cost included.

6-Seater Picnic Table- Fits 2 Wheelchairs

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs.

6650 Half Mask

The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest. A replaceable terrycloth pad lines the foam mask, and an aluminum inner core allows the headpiece to be formed to fit the face. For mounting purposes, one side of of the mask can be attached directly to headrest; the opposite side fastens with snap buckles. OPTIONS: 6650 Mount P

6917 Non-Stomp-Down-Able Heel Loops

The 6917 Non-Stomp-Down-Able Heel Loops are flexible polyethylene strap designed to provide an alternative to webbed heel straps on wheelchair footrests. An ankle strap is included for maintaining foot placement, as well as attachment screws. SIZES: Universally sized; one size fits all. COLOR: Black.

6Runner 10 (Model 888Wnlm)

The 6Runner 10, model 888WNLM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 23 x 46.4 inches. The ground clearance is 3 inches. The turning radius is 15.75 inches. The base is available in red. CONTROLS: VR2 Controller and VR2 Main Control Box. MWD: Mid-wheel drive with 0.6 horsepower. SEAT (WxDxH): 18 x 17.5 x 22 inche

6Runner 10 Deluxe (Model 858Wm)

The 6Runner 10 Deluxe, model 858WM, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 30 x 22 x 38.6 inches. The ground clearance is 3 inches. The turning radius is 18 inches. The base is available in red or blue. CONTROLS: Integral VSI Joystick Controller and VSI Controller Bracket. MWD: Mid-wheel drive with 0.8 horsepower. SEAT

6Runner 10 Rehab (Model 888Wnlm-R)

The 6Runner 10 Rehab, model 888WNLM-R, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 42 x 23 x 35.5 inches. The wheelbase is 33 x 23 inches with a ground clearance of 3 inches. The turning radius is 15.75 inches. The base is available in blue. CONTROLS: Integral VSI Joystick Controller. MWD: Mid-wheel drive with 0.8 horsepower.

6Runner 14 (Model 888Wnllhd)

The 6Runner 14, model 888WNLLHD, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 42 x 26 x 49 inches. The ground clearance is 2.75 inches. The turning radius is 23.5 inches. The base is available in red. CONTROLS: Programmable VR2 Joystick Controller with adjustable speed and battery life indicator. MWD: Mid-wheel drive with 1

7 Inch Slide Mounting Kit Models 3621 & 3621-01)

The 7-Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Slide Bracket; a 7-inch, 90-degree Tube Slide; and two 3-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

7901 Hensinger Covers

The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large. COLOR: Black or blue.

7902 Hensinger Strap

The 7902 Hensinger Strap is a replacement straps with either a snap buckle or an adjustable slide buckle designed for the 6810 Hensinger Head Support and the 6809 High Back Hensinger Head Support (see separate entries). The straps are attached to the back plate. An optional velcro closure is available. SIZES: Extra small, small, medium or large. COLOR: Black.

7903 Hensinger Quick Release Mount Plate

The 7903 Hensinger Quick Release Mount Plate is a headrest accessory for the Hensinger Head Supports (see separate entries). The plate has 2 straps that attach the unit to the back of a seating unit. The Hensinger Head Support attaches to the plate with velcro. The velcro release will allow the head to move forward with the body. For permanent mounting, 2 screws are used to insure that the front and back plate stay connected. DIMENSIONS: 12 x 4 inches. COLOR: Black.

7914 Half Mask Otto Bock Mount Plate

The 7914 Half Mask Otto Bock Mount Plate is a headrest accessory designed to mount the 6650 Half Mask (see separate entry) onto the Otto Bock headrest. The mask mounts with adhesive foam backing for breakaway release in the event of emergency impacts. COLOR: Black.

8-Inch Beverage Bag (Model 70020)

The 8-inch Beverage Bag, model 70020, is a caddy for attachment to wheelchairs designed to accommodate liquid containers, school or art supplies, and other items. The lined bag will holds 1 or 2 cans of soda or other drinks, sports bottles, and coffee mugs. Made of coated nylon, the caddy affixes to the wheelchair tubing with a 3-inch piece of adhesive Velcro strapping (included). The bag features a spring-action hex frame opening which can be opened by simply placing the fingers in the middle o

802-DY Ultra Lightweight Wheelchair

The 802-DY Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities, or spinal cord injury. FRAME (HxW): 37 x (23 or 25) inches. Folding high strength aluminum frame with black powder coat finish. Folded width is 12 inches. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 16 inches. Seat to floor height is 20 inches. Seat back height is 16 inches or 17 inches (18-inch seat width). Options include foldab

9-Inch Security Pouch (Model 70000)

The 9-inch Security Pouch, model 70000, is a wheelchair side pouch designed to be attached under the armrest to prevent theft of valuables and money. The flap-style pouch is secured with heavy webbing, and made of 400 Denier coated nylon packcloth. This lined carrying bag will accommodate a calculator, writing utensils, change purses or small wallets, etc. DIMENSIONS (WxH): 10 x 6 inches. COLOR: Royal blue, magenta, teal, grey, black, and burgundy.

90-Degree Tube Plate Weldment (Models 1511, 1511-01, 1512, 1512-01, 1513, & 1513-01)

The 90-Degree Tube Plate Weldment is headrest accessory interface hardware designed for positioning the wheelchair headrest. The 90-Degree Tube Plate Weldment attaches to the recessed area of the Headrest and slides through the 90-degree Vertical Tube attached to the back of the wheelchair. OPTIONS: A custom made 90-Degree Tube Plate Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLORS: Both the original and the custom made options are available in black and stainl

A-6 & A-6S

The A-6 and A-6S are lightweight wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The A-6S comes standard with a rigid suspension and the A-6 is standard without the suspension. The overall width for both models is available from 20.75 to 34.5 inches. A tapered front end or a non-tapered V front end are available at no extra charge. The frame width and depth are available in a range of sizes from 14 x 14 inches to 20 x 20 inches in one-inch inc

A4

The A4 is a lightweight wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Lightweight frame with an overall width of 18.75 to 36.5 inches. Features include a curved back frame and a camber tube clamp assembly that allows adustment of the center-of-gravity in an infinite number of settings. A full suspension is available as an option. SEAT: Available with seat widths of 12 to 22 inches and seat depths of 14 to 22 inches. The rear seat-to-floor hei

Ableware 700010000 Morph Wheels-Folding Wheels for Wheelchairs

Morph Wheels-Folding for Wheelchairs are designed to be foldable wheelchairs. Is intended facilitate transportation when traveling. It  comes complete with rim, push rim and solid tire, and are designed to fit any chair with a standard quick release axle. Attaching Morph™ Wheels or removing them from the wheelchair is exactly the same process as with any other wheels that use quick release axles. The axle acts as a fail-safe mechanism ensuring that as long as it is through the hub of the wheel t

Ableware 703230001 Star Glide Walker Slides-1 1/8"

Star Glide Walker Slides are for wheeled walkers to reduce friction and self-align with the floor to allow for easier movement of the walker. To install, remove the rubber tips from the walker legs and replace them with Star Glides.

Ableware 704170000 35" Mobility Leg Lift by Maddak

Ableware's Leg Lift is designed for people with limited lower extremity strength. It enables them to lift the foot onto a wheelchair foot rest, bed or into a car. The user can independently move their feet with the help of the leg strip.

Ableware 704180002 Leg Wrap Positioning Aid

The Ableware Leg Wrap Positioning Aids attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Convenient upper and lower handles eliminate the need to grab clothing and create a controlled movement thereby reducing injury caused by dropping the legs.  

Ableware 706010000 Laptop Wheelchair Desk

Laptop Wheelchair Desk is designed for people that use a wheelchair. Roomy storage beneath the lid for lap top computers, business files, and personal items. Durable plastic clip on the inside of the lid holds books and newspapers open. Adjustable lid tilts forward for reading and writing; lies flat for lap top use and other activities. Tray top recesses securely hold paper clips, cups, cell phones, pens, etc.

Ableware 706201001 Mini Oxygen Tank Holder for Wheelchairs

Ableware's Mini Oxygen Tank Holder for wheelchairs holds M6 oxygen cylinders. The holder attaches to the handles and frame of the wheelchair and positions the tank so as to not interfere with the user's head or back. It features two pockets that can be used to hold either two cylinders or once cylinder and miscellaneous supplies, like tubing. It is made of heavy duty, waterproof nylon.  

Ableware 712050000 Bowling Ball Pusher

The Bowling Ball Pusher is designed for wheelchair users. Is intended for people who want to play bowling but are in a wheelchair. Four-pronged steel and aluminum guide rests gently on the alley floor while pushing the ball. Plastic caps protect the floor surface and bowling ball. Extension handle lengthens for use, shortens for transport or storage. 

Ableware Bedside Beverage Holder by Maddak

The Ableware Bedside Beverage Holder by Maddak is a cup holder for individuals confined to beds and/or wheelchairs who are do not have the ability of holding a cup, bottle, or mug in their hand. The Bedside Beverage Holder clamps to most tubes on beds or wheelchairs. It is easy to attach, adjust, and relocate. It holds bottles and mugs with handles and position drink within reach.

Abs Plastic Tray (Models 1719, 2121, & 2124)

Molded ABS Lapboard with an edge rim. Three sizes: 17 1/2 by 19 1/2 inches; 21 1/2 by 21 inches; and 21 1/2 by 24 inches. Attaches to wheelchair armrest with bayonet style hardware, adjustable for different wheelchair widths. Accessories: clear (PET) shield that snaps onto the tray for use with symbol charts. The shield becomes scratched with use and must be replaced when it becomes difficult to see through.

Abs Plastic Trays

ABS Plastic Trays can be used on wheelchairs and prone standers. The front edge and sides have a rim to prevent objects from falling off the tray. Models are available with or without cutouts. Tray glides available. DIMENSIONS (WxD): 20 x 20 inches with a 5 inch cutout (Child); and 24 x 20 inches with a 6 inch cutout (Adult). COLOR: Beige.

Access4U Portable Folding Ramp

The Access4U Portable Folding Ramp is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. This ramp provides wheelchair access over one or two steps or a curb. The ramp is made of welded aluminum and folds to fit in a car trunk or van. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 30 or 36 inches. Custom sizes are also available. CAPACITY: 600 pounds.

Accessory Mounting Platforms & Hardware

The Accessory Mounting Platforms and Hardware are adjustable wheelchair mounting kits for communicators. These aluminum mounting systems have a 2.5 x 8.5 inch platform and adjust through 360 degrees. Options include a flexible or pedestal mount, and flange, tube clamp, or tray clip.

Acrobat

The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra

Act Wheelchair

The Act Wheelchair is a lightweight adult wheelchair designed for use by individuals with mobilitiy disabilities. FRAME: Rigid titanium frame in a choice of a short or long configuration. The frame is available in a standard choice red, black, olive green, and steel blue smooth finishes and sea green, blue, plum, or grey textured finishes. Anti-tips are optional. Blue chrome and black graphite finishes are optional. SEAT: The height- and angle-adjustable seat is available in a choice of 14, 15,

Action Pro, Action Pro-Sa & Action Pro-T

The Action Pro Series wheelch are manual drive sport wheelchairs for individuals with mobility disabilities. FRAME: Rigid aluminum frame available in a choice of colors. Anti-tips are optional. SEAT: Seat width from 14 to 20 inches in 1-inch increments; seat depth ranges from 14 to 18 inches in 1-inch increments; the seat height is adjustable in ranges from 8 to 12 inches, 10 to 14 inches, 14 to 18 inches, and 16 to 20 inches. The fold-down backrest angle adjusts from 0 to 8 degrees. Optional p

Action Trackchair (Model Sm)

The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each sid

Action Trackchair (Model St)

The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair

Activator

Activator is a folding lightweight manual wheelchair designed for use by individuals with mobility disabilities. This chair is designed to be flat-packed for loading into a car. FRAME: Rigid cantilevered titanium tube frame with front locking hinges made of solid titanium.

Active Wheelchair Platform Rocker

The Active Wheelchair Platform Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility or neurological disabilities, Alzheimer's disease, or spinal cord injury. This unit is designed to enable an individual to experience the benefits of rocking without transfering from a wheelchair. The rocker features an entry/exit rear ramp, adjustable front caster stops to center the wheelchair on the platform, and two safety wheelchair tie-down straps. The Active Platfo

Activity Lap Tray (Model 17698)

The Activity Lap Tray, model 17698, is a lapboard or lap tray designed for use by children ages 3 years and above and adults with mobility disabilities. Made of polypropylene plastic, this tray fits over the lap when the user is seated. The Activity Lap Tray consists of a firm flat tray between two side pockets that extent below the tray and act as the supports when the device in placed on the lap. On the tray, the user can write, play games, create crafts and perform other activities. The side

Activity Tray Swivels (Model 70675-0000)

The Activity Tray Swivels, model 70675-0000, is a swing away lapboard designed to be attached to the tubing on most wheelchairs. The tray is made of birchwood and has a clear non-slip finish on the top surface. The tray has a lip to keep items from rolling off. It is supplied with a flat triangular aluminum support and a screw-mounted 3/8-inch long aluminum spindle at one corner. DIMENSIONS: 13 x 17 inches.

Adalap

The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,

Adapt-A-Tray

The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b

Adaptive Connection System

The Adaptive Connection System is a battery charger for use on batteries for electric wheelchairs. All ACS models feature field adaptability which includes: Input of 120 or 240 volt AC, 50 or 60 cycle, International Power Entry System; Output in the form of a plug-in DC cord matched to application need; and Voltage Setting which are adjustable in field to match current and future battery needs. Other features include automatic operation, temperature compensation, quiet operation, short circuit p

Add-On Tray, The

DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.

Adjustable Back

The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting

Adjustable Channel Bracket Mount For Lapboard (Model 08-2000)

Lapboard with adjustable channel, mounts to arm of wheelchair with bracket. 1/4 inch clear acrylic. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Adjustable Footrest

Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.

Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)

The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm

Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)

The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam

Adjustable Split Solid Seat Insert (Model Ssp80Xx)

The Adjustable Split Solid Seat Insert, model SSP80XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an adjustable split seat, model MOD4900. DIMENSIONS: The foam is 1.5 inches thick.

Adl Lap Tray (Model Nc94114)

The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.

Adolescent Transporter

The Adolescent Transporter is an attendant propelled transport wheelchair designed for use with children and adolescents with mobility disabilities. FRAME: The folding, chrome-plated carbon steel frame features a firm, cushioned base to encourage good posture and handle grips for pushing or carrying the stroller. The frame measures 3 x 21 x 11 inches when folded. SEAT (WxHxD): The seat is 17 x 21.5 x 17 inches. UPHOLSTERY: Tan padded embossed vinyl upholstery. ARMRESTS: The fixed sloping, armre

Adult Wheelchair Tray (Model 766)

The Adult Wheelchair Tray, model 766, is an adjustable lapboard designed to fit all size wheelchairs. The top is mar-resistant wood grain laminate and has rims on three side. DIMENSIONS: 23 1/2 inches wide x 21 1/2 deep x 1/2 inch thick, cut out size 14 1/2 x 8 3/4 inches, rims 1/2 inch high.

Adventure

Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches

Afikim Afiscooter S 4-Wheel Scooter

The Afikim Afiscooter S 4-Wheel Scooter is designed for individuals with limited mobility due to cardiovascular, orthopedic or neurological conditions. It can be used both indoors and outdoors. It has a stable four-wheel design and high ground clearance combination to create a smooth ride wherever you go. The full front and rear suspension, shock absorbers, and energy absorbing bumpers all combine to make a smooth riding experience. It has a top speed of 9.30 miles per hour.

Afterburner Wheel Chair Pusher

The Afterburner Wheel Chair Pusher is a cycle attachment for the wheelchair designed to transport a person in a wheelchair without having to transfer her or him from the wheelchair, and to provide outdoor entertainment for individuals who use a wheelchair. The back portion of the Afterburner looks like a normal bicycle with a rear wheel, seat and pedals; however there is no front wheel or handle bars. The front of the device is designed to attach to the back of a wheelchair (included). The After

Agility Plus

Agility Plus is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This articulating, swing-away legrest come in a choice of mechanical elevation or independent power elevation and is springloaded, removable, and compact.

Air Free Danube Scooter Tire

The Air Free Danube Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters and runabouts. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8x1 tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter, 1 inch wide.

Air Free Fraser Scooter Tire

The Air Free Fraser Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.5-inch tire. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.5 inches wide.

Air Free Linville Wheelchair / Scooter Tire

The Air Free Linville Wheelchair and Scooter Tire is a polyurethane tire designed for use as a replacement tire for wheelchairs and electric scooters. This airless tire has a saw tooth tread pattern which is non-marking but can traverse severe terrain. The tire fits any manufacturer's model requiring a 410/350-4 type tire on a split rim hub. Its PSI equivalency rating is 50 pounds per square inch. DIMENSIONS: 10.5 inches in diameter x 3 inches wide. WARRANTY: Lifetime warranty against structural

Air Free Onega Hd Scooter Tire

The Air Free Onega HD Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. For use where a more rugged tire is needed, this airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. Its PSI equivalency rating of 80 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Onega Scooter Tire

The Air Free Onega Scooter Tire is a polyurethane tire designed for use as a replacement tire for electric scooters. This airless tire fits most manufacturers who use a two-piece hub that takes a 9/3.50-4 tire. This tire has a PSI equivalency rating of 50 pounds per square inch. DIMENSIONS: 9 inches in diameter x 3.5 inches wide.

Air Free Pyramid Tire, The

The Air Free Pyramid Tire is a replacement wheelchair tire designed for use by wheelchair users. This lightweight tire is designed to be used on low profile rims. This tire has a smooth, non-marking tread pattern. DIMENSIONS: 24 x 1 inches. COLOR: Available in a variety of colors.

Air Free Trinity Scooter Tire

The Air Free Trinity Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire fits all manufacturers' split rim hubs that require a 250-4 type tire, also known as a 9 x 2.8. It also fits hubs requiring a 280-4 or 280/250-4 tire. It has a smooth tread and a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 9 inches in diameter x 2.8 inches wide.

Air Free Volga Scooter Tire

The Air Free Volga Scooter Tire is a polyurethane tire designed for use as a replacement tire for scooters. This airless tire requires a split hub and fits all manufacturers' caster-type wheels requiring an 8 x 1.25-inch tire. This tire has a PSI equivalency rating of 40 pounds per square inch. DIMENSIONS: 8 inches in diameter x 1.25 inches wide.

Air+Chair

The Air+Chair Onboard Transit Chair is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. FRAME (HxLxW): 34 x 35.25 x 16.75 inches; when folded (HxDxW) 23.35 x 23.25 x 9.25 inches. It has a light gray solid welded frame with handles extending from the back. SEAT: Adjustable padded seat a

Aircraft Aluminum Wheelchair

The Aircraft Aluminum Wheelchair is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Made of rigid 6000 Series aircraft-grade aluminum and heat treated after welding. Available frame colors are deep green, Porsche red, mother of pearl, lapis blue, teal metallic, chrome yellow, or lime green. Impact guards are optional. Custom modifications are available. SEAT (LxW): 14 to 18 x 13 to 18 inches. The distance from the floor to the sea

Airfree 24 & Airfree 20

Airfree tubes for pneumatic wheelchair tires. Endurothane II pneumatic tube construction for use with conventional pneumatic rubber wheelchair tires. AIRFREE 24 has flex lock feature to snugly fit the rim seat securing spoke nipples. AIRFREE 20 has elliptical flex support for power wheelchairs. Lifetime guarantee against flats, blowouts and pressure loss. Can improve maneuverability and reduces tire wear. AF241375 fits most major brands; 24 by 1 3/8 inches. AF24125 fits most 24 by 1 1/4 inch tir

Airlite Pro

AirLite Pro is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Total length is 32.25 inches for 75-degree frame and 30 inches for 90-degree frame. The total width is seat width plus 8.75 inches with 3-degree camber. The frame is made of aluminum with carbon fiber camber tube. The aluminum is double-butted (twice as thick) where tubes connect. Options include suspension and Vario-Ax Multi Positional camber tube with 1-, 3-,

Airman Compact Air Pump

The Airman Compact Air Pump is a powered ball and tire pump designed for use to inflate wheelchair tires. This compact high-pressure air compressor quickly inflates pneumatic wheelchair tires and can be used to inflate sports balls. The unit has a built-in pressure gauge and comes with a ball adapter, balloon adapter, and owner's manual. POWER: Uses 12-volt car cigarette lighter adapter (included). DIMENSIONS: Adapter cable is 3.4 meters.

Aislemaster Boarding Transfer Chair (Models 8000 & 8010)

The AisleMaster Boarding Transfer Chair, models 8000 and 8010, is a transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, and neurological disabilities, or spinal cord injury. This wheelchair is designed to fit narrow aisles and confined spaces for use in boarding aircraft. Model 8000 fits jet aircraft and model 8010 fits commuter aircraft. FRAME (HxLxW): Model 8000 is 48 x 32 x 16 inches and model 8010 is 48 x 32 x 13 inches. Both models hav

Aislemaster Folding (Model 8020)

The AisleMaster Folding, model 8020, is an emergency evacuation carrier and transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, or neurological disabilities, or spinal cord injury. This wheelchair has a slender width and front-and-rear telescoping lifting handles to allow passage through narrow doorways, confined aisles, and stairways. FRAME (HxLxW): 47 x 32 x 16 inches; when folded (HxDxW) 147 x 17 x 16 inches. The frame is yellow. SEAT:

Alert Light

The Alert Light is a safety flag designed for use with manual wheelchairs, power wheelchairs or scooters. It is intended to improve the visibility of the wheelchair or scooter during the day or night. The Alert Light consists of a pennant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. The upper portion of the shaft has a light emitting diode (LED) light that can be set as an orange glow or a flashing str

Alimed Aerocell Ii Pressure Relieving Wheelchair Cushions

The Alimed Aerocell II is a wheelchair cushion cover designed for individuals at risk of developing pressure sores. The cushion distributes pressure for even positioning for a more relaxed and comfortable sitting experience. The device is made out of black stretch nylon and its cover is washable. DIMENSIONS: Standard size is 18 inches length x 20 inches width x 4 inches depth. CAPACITY: 440 pound capacity. WEIGHT: 3.5 pounds. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.

Alimed E-Z Release Seat Belt With Alarm

The AliMed E-Z Release Seat Belt with Alarm is a wandering patient system designed for use by individuals with Alzheimer's disease or other cognitive disabilities who are at risk for falls in homes or hospitals. This seatbelt is equipped with a standard sensor unit (included) and a hook and loop fastening buckle that, once disengaged, alerts a caregiver or hospital staff that a person is about to wander or risks a fall. The sensor alarm can be attached to regular chairs, geri chairs, wheelchair

Alimed Inflatable Lap Buddy (Model 77338)

The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator

All Terrain Chair (Model Atc 100)

The All Terrain Chair, model ATC 100, is a beach wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): 36 x 31 inches. The white PVC tubular frame disassembles for storage and transport. All hardware is stainless steel. SEAT (WxDxH): 18 x 18 x 24 inches. A seatbelt is included. A fixed backrest is standard; a reclining backrest is optional. CUSHION: An optional cushion set is available. UPHOLSTERY: Mesh sling upholstery. ARMRESTS: Swing-away armrests are standard.

All Terrain Chair (Model Atc 200)

The All Terrain Chair, model ATC 200, is a beach wheelchair designed for use by children with mobility disabilities. FRAME: The white PVC tubular frame disassembles for storage and transport. All hardware is stainless steel. SEAT: A seatbelt is included. A fixed seat back is standard; a reclining back is available. CUSHION: An optional cushion set is available. UPHOLSTERY: Mesh sling upholstery. ARMRESTS: Swing-away armrests are standard. BRAKES: Hand operated wheel locks. WHEELS: Four wheels wi

Alternately-Propelled Mechanical Wheelchair

Alternately-Propelled Mechanical Wheelchair (APMW) is a modified wheelchair that incorporates a superior braking system and eliminates complete hand-to-rail contact when moving forward. By incorporating a clutch system engaged by air cylinders, the user can apply a relatively small amount of force to travel further than a traditional wheelchair. The APMW is designed for a range of users, including children of eight years and older, people of diminished upper body capacity, and individuals seeki

Aluminium Transport 19 Inch Wheelchair (Model 1745)

The Aluminum Transport 19 Inch Wheelchair, model 1745, is a lightweight transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Aluminum frame with push handles that fold down for storage and transport. SEAT: The seat is 19 inches wide and is equipped with a seat belt. UPHOLSTERY: Available in silver, blue, or green. BRAKES: Wheel locks. FOOTRESTS: Swing-away footrests. CAPACITY: 300 pounds. WARRANTY: Can be returned for exchange, credit, or refund within 90 days.

Aluminum Series Back Support

The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal

Alvema Ito Stroller

The Alvema Ito Stroller is a lightweight tilt-in-space stroller designed for use by children with physical disabilities. FRAME (HxLxW): The folding frame is available in two sizes. Folded dimensions are 23 x 13 x 30 inches (small) or 25 x 13 x 33 inches (large). The total width is 23 inches on the small size or 25 inches for the large size. Standard features include a height adjustable handle. Other optional accessories include a basket, sunroof, rain/wind cape, or grip rail. SEAT (LxW): 9 to 11

Alvema Trax 600 All Terrain Stroller

The Alvema Trax 600 All Terrain Stroller is an indoor/outdoor all-terrain stroller designed for use with children from eight to 16 years of age with mobility disabilities. FRAME: The folding tubular frame features an integral push handle, growth adjustments, and spring shock absorbers. The stroller is 24.5 inches wide. SEAT (WxDxH): 11.5 to 15.5 inches x 9.75 to 16.5 x 17.75 inches. The back height adjusts from 22 to 30.75 inches. The seat features105 to 127 degrees of tilt. Lateral supports and

Ameriglide 300 Vehicle Wheelchair Lift

The AmeriGlide 300 Vehicle Wheelchair Lift is a scooter or wheelchair loader designed for use by individuals with mobility disabilities. This lift fits into most vehicles and works with most scooters and electric wheelchairs, including Jazzy power chairs and Pride scooters. The lift arm rotates manually after the unit is pushed or pulled into or out of the vehicle. The unit has telescoping base legs, an adjustable-length extending boom with a boom arm end cap to protect vehicle headliners, and a

Amerityre Low Speed Foam Tires

Amerityre Low Speed Foam Tires, also called Flatfree tires, are foam core tires designed for use on wheelchairs. These tires have a polyurethane foam core and can never go flat. Because the density of foam is maintained at a high level, these tires exhibit low rolling resistance which means less effort is required to make them roll. Materials are ultraviolet (UV) and ozone resistant. SIZES: More than 75 sizes are available. COLOR: Black, grey, green, blue, or yellow.

Amigo Classic Fd

The Amigo Classic FD (front drive) is a 3-wheeled scooter designed primarily for indoor surfaces and outdoor use on solid, flat surfaces by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 20 x 36.5 inches. The underbody ground clearance is 2.5 inches and the turning radius is 34 inches. The painted steel frame is available in midnight black with a black deck and midnight black front cover over the front wheel and midnight black rear cover (standard) over the batte

Amigo Escort

Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off

Amigo Ext

The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38

Amigo Hd

The Amigo HD is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. It is designed for use by larger-framed individuals. FRAME (HxLxW): 39.5 x 47.8 x 24 inches. The steel frame is painted cinnamon red and has a one-piece extended platform with a 3.5-inch underbody clearance and a 38-inch turning radius and a black rear safety bumper. A basket mounted on the front of the tiller is standard. CONTROLS: EZ Tilt handle with HI/LO speed controls a

Amigo Rd

Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, pacific blue, champagne beige or midnight black, with a black rear safety bumper. A basket mounted on the front of the tiller is standard. A basket mounted on the front of the ti

Amigo Rt Express

The Amigo RT Express is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME: (HxLxW): 34.75 x 41.5 x 20.5 inches. A version with a 3-inch shorter platform is also available (see separate listing for Amigo RT Express Junior). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a 33 degree turning radius. The painted steel frame is available in champagne beige, midnight black, pacific b

Amigo Rt Express Junior

The Amigo RT Express Junior is a 3-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 33 x 38.5 x 20.5 inches. This compact scooter is designed to accommodate people up to five feet, four inches tall. A version with a 3-inch longer platform is also available (see separate listing for Amigo RT Express). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a turning radius of 33 inche

Amigo Smartmover & Smartmover Xl

The Amigo SmartMover and SmartMover XL are three-wheel scooters designed for use by visitors and employees in hospitals, museums, libraries, universities and other public spaces with lower extremity, mobility, neurological, or physical disabilities, obesity, or spinal cord injury. FRAME (HxLxW): 37 (30.5 at top of basket) x 49 (53 for SmartMover XL) x 24 inches. The steel frame features a black platform and tiller. A rear safety bumper and front and rear stability devices are standard. The turni

Amigo Travelmate

The Amigo TravelMate is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 43 x 22 x 36.5 inches. The TravelMate has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in black. The scooter disassembles or the tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. The con

Amigo Viva

The Amigo Viva is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 45 x 22.5 x 36 inches. This scooter has an underbody ground clearance of 2.25 inches and a turning radius of 35 inches. The painted steel frame is available in moss green. The tiller folds down for transport or storage. A basket mounted on the front of the tiller is standard. CONTROLS: MPC electronics controller. Controls are located on adjustable EZ

Amputee Attachment Kits

Kit converts any Colson fixed back wheelchair to an amputee model. Rear wheels are moved back 1 1/2 inches to accommodate loss of body weight in front of chair. Kit is shipped with one pair of toggle brakes designed to work with the repositioned 24 inch wheels. 5/8, 7/16, or 1/2 inch axles should be specified.

Amputee Board For Below-Knee Amputees.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded extension to one side of a wheelchair seat to allow the stump of an above-knee amputee to be elevated and remain in extension. Instructions for building a board to fit between the wheelchair and its cushion with retractable shelves that can accommodate either a left or right amputee; and a foam pad with strips of velfoam which attaches to pieces of velcro on the shelf. Includes list of materials, drawings and photographs. SKILLS REQUIRED: Woodwo

Amusement Roller Racer (Model 5000A)

The Amusement Roller Racer, Model 5000A, is a riding toy or scooter board designed for use by children with mobility, balance, or lower extremity disabilities. Propelled by swinging the handlebars/footrests from side to side, the Roller Racer can be ridden by individuals ages three years through adult, indoors and outdoors. The thick "rams-horn" handlebars are designed to protect and keep hands inside the rail. The buffer wheels are designed to protect the handlebar and the riding surface as wel

Amyseat Modular Power Seating System

The AmySEAT Modular Power Seating System is a powered reclining and/or tilt-in-space seating system designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The seating system comes with either Power Tilt, Power Recline, or both. Power Recline comes with mechanical ISR (Integrated Shear Reduction). CONTROLS: Single actuator seat controller with dual toggle switch. SEAT (LxW): 14 to 24 x 14 to 24 inches in 1-inch increments. All systems include adjustab

Angled Footrest.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded, angled footrest for use when seated in an armchair. Lists materials (wood) needed and provides instructions for constructing a footstool angled to support the feet in comfort. The height and angle of the stool can be determined by experimenting with cushions. Should be well padded, particularly under the heels. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 84-

Ankle/foot Straps

Pair of velcro straps with mounting hardware and D-ring closures. Can be mounted to padded footboards or existing wheelchair footrests, positioned to strap ankle or forefoot.

Anna-Dote

Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha

Anti-Thrust Solid Seat Insert (Model Ssp40Xx)

The Anti-Thrust Solid Seat Insert, model SSP40XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an anti-thrust seat, model MOD4400. DIMENSIONS: The foam is 1.5-inches thick.

Anti-Tipping Bracket (Models 85F & 85R)

The Anti-Tipping Bracket is an anti-tipping lever designed for use on wheelchairs. The device consists of a pair of curved tubes, each with a small roller wheel, that attach to the wheelchair frame. Model 85F extends beyond the front caster to prevent forward tipping of the wheelchair. Model 85R extends from the back of the chair to prevent rear tipping.

Aquatrek Wheel Chair

The AquaTrek Wheel Chair is a pool wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair can be used in and around swimming pools, spas, and showers. It is totally submersible and may be used with any of the AquaTrek Ladder, Steps, or Ramps (see separate entries). FRAME: Furniture-grade PVC with stainless steel fasteners and one-piece Nylatron bushings. SEAT: Optional seat belt and shoulder harness. ARMRESTS: Swing arm. CASTERS: Front wheels are

Arm Tote (Models Ez0123 & Ez0124)

The Arm Tote is a wheelchair or scooter side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, this pack attaches to the armrest of a wheelchair or scooter with the two adjustable straps with plastic fasteners. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0124) or three (model EZ0123) pockets on the outside. SIZES: Large (model EZ0123) and small (model EZ0124). DIMENSIONS (HxLxW): 2 x 14 x 10.5 inches

Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)

The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.

Arm Tray With Arm Tray Pillow (Model A74610)

The Arm Tray with Arm Tray Pillow is an arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. This tray features a comfortable, polyester fiber filled pillow containing extra filling underneath the hand for elevation to help reduce edema. The forarm portion of the pillow cups the arm, padding the sides and base of the tray. It includes all straps to securely position the pillow in the tray and the arm on the pillow. The pillow is machin

Arm Tray With Straps (Model A7461)

The Arm Tray with Straps, model A7461, is a plastic arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. The tray is equipped with three Velcro straps to secure the device to the wheelchair and Kushionflex pad to buffer any potential area of irritation. The tray can be secured on chairs with standard arms using three straps and on chairs with desk-length arms secured by only two straps. DIMENSIONS: The straps are one inch wide and the

Arm Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides support, elevation, or both for the forearm and hand of an individual setting in a wheelchair. Directions and materials given for 2 sizes of arm tray. diagram. similar to commercially available product. Attaches to wheelchair armrest. SKILLS REQUIRED: Woodworking, plastics. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 47- 48. 1976.

Arm Trough (Model 07-D)

Arm trough has molded plastic shell with energy absorbing foam pad covered with molded naugahyde skin. Provides full support from elbow to hand. Overall length is 18 1/2 inches; bed length is 15 1/2 inches, depth, 1 1/4 inches; elbow stop is 3 1/2 inches long and 2 1/2 inches high; inside width is 4 inches, flares at front to 6 1/2 inches.

Arm Trough (Model 09-2000)

The Arm Trough, model 09-2000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. For use with on the left and right arm, the Arm Trough is made of .25-inch Kydex with 1-inch nylon webbing straps with faux sheepskin covers. Hook and loop straps or buckle closure are standard. SIZES: Small/pediatric, medium/adolescent and large/adult. DIMENSIONS (LxW): 12 x 4.5 (small); 17 x 5 (medium)

Arm Trough (Model 09-4000)

The Arm Trough, model 09-4000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. The trough is designed with a curved shape to help protect and keep the forearm in place and features a soft durable Lycra neoprene liner to help reduce skin irritation. Other features include an elbow block to keep the arm stationary in a tilted or reclined position, and a padded wrist strap with Velcro

Arm-A-Rest

The Arm-a-Rest is a carrying caddy designed for attachment to all wheelchairs with arm and/or back support. The pouches are fabricated of water repellant and stain resistant crushed velvet and drape over either the armrest or the back of the chair. The armrest version has a padded section which rests on top of the armrest pad; the bag storage version has a padded section which provides back support. The pouches attach with hook and loop strips. OPTIONS: A cushioned arm and storage pouch; a cushi

Armchair Fitness Aerobics

Armchair Fitness is an exercise videotape designed for use by seniors or individuals with mobility disabilities. The program includes three graduated 20-minute workouts of seated stretching and strengthening exercises set to music.

Armrest Cushions (Models 436A4 & 436A5 Series) & Channel Armrest (Models 436A2 & 436A3)

The Armrest Cushions, models 436A4 and 436A4 series ($63 to $21), and the Channel Armrest, models 436A2 and 436A3 ($35 to $32), consist of steel reinforced armrests, injection molded with self skinning foam. Straight armrests, and desk or full length sizes are molded to cradle the arm for support. The Channel interchangeable armrest is molded to cradle the elbow and arm with several different hand pads available. The Cushions can be mounted directly to standard wheelchair arms or used with the 4

Armrest Fixed Bracket (Model 31897)

The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o

Armrest Flip-Away Bracket (Model 31901)

The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d

Armrest Inhibition Cradle

The Armrest Inhibition Cradle is an ABS plastic contoured arm trough with velcro-in vinyl pad. The trough has forearm and upper arm sections. The adjustable mounting hardware clamps to standard 7/8 inch tubing armrests.

Armrest Modification For Support Of Paretic Or Paralyzed Upper Extremity.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Modification of a wheelchair armrest to provide a surface for positioning or exercising a paralyzed or partially paralyzed arm. Describes an armrest made of wood padded with foam-backed carpet, which is attached to the arm of a wheelchair with a hose clamp, and which has a Velcro safety strap to hold the arm in place. Includes instructions, diagram and photographs. SKILLS REQUIRED: Woodworking. Assembly. AUTHOR: Pifer, R G TITLE: Armrest Modification f

Armrest Mounting Bracket (Model 3395)

Used in ocnjunction with a standard hand-control clamp for mounting a Model 3185 joystick for hand operation. Consists of a 1/2 inch diamter stainless steel mounting rod fitted to a 3/4 inch diamter mounting shaft to permit a wide range of joystick positioning.

Armtrough Alternative

The Armtrough Alternative is an add-on armrest designed for use by individuals with upper extremity, severe physical, or neurological disabilities who use wheelchairs. This armrest cradles the arm in a range of positions and is padded for comfort. This adjustable unit is built with lateral for trunk support and to block elbow medially and includes an elbow stop to keep the elbow secure. The unit also comes with a hand block for hand and finger positioning.

Arrow Microcomputer Control (Mcc) Mk Ii

The Arrow Microcomputer Control (MCC) MK II is a motor and accessory control system designed for Invacare Arrow and Arrow XT series wheelchairs. The standard system includes a joystick with indoor/outdoor, high/low, on/off, and horn toggle switches; and battery level display, mode and level indicators. Other features include a standby mode; emergency stop switch input; and proportional head control compatibility. Adjustable performance features include indoor/outdoor performance, maximum speeds,

Asl 12 Volt Sealed Lead Acid Battery And Charger (Model Asl515)

The ASL 12 Volt Sealed Lead Acid Battery and Charger, model ASL515, is a battery for wheelchair accessories, switches, or sensors, designed for use by individuals with mobility disabilities. This transportable battery provides a 12-volt power source for accessories or 12-volt direct current (DC) switches/sensors. The battery is lightweight and can fit into a small wheelchair pouch. It provides 1.2 amp hours of power. The battery is sealed and comes with a charger. DIMENSIONS (HxLxW): 2 x 4 x 2 i

Asl Adjustable Proximity Sensor With Mono Port (Model Asl208_M)

The ASL Adjustable Proximity Sensor with mono port, model ASL208_M, is a sensor switch designed for use by individuals with upper extremity disabilities, neurological disabilities, or severe physical disabilities. This "no touch" proximity switch has an adjustable "void space" range, which allows the switch to function when mounted under a surface up to a half-inch thick, thus allowing the proximity field to begin above the voided area (for example, the surface of a tray). This switch works with

Asl Fiber Optic Sensor With Mono Port (Model Asl202-M)

The ASL Fiber Optic Sensor with Mono Port, model ASL202_M, is a sensor switch designed for use by individuals with mobility, communication, or severe physical disabilities. This single function switch has an adjustable activation range from touch to 2.5 inches, with a round target area. This fiber optic switch can be programmed for either normally open (NO) or normally closed (NC) operation. In the NO mode, switch activation occurs when an object is detected in the adjusted range. In the NC mode

Asl Laptop Power Converter (Asl509)

The ASL Laptop Power Converter, model ASL509, is a wheelchair battery adaptor designed for use by individuals with mobility disabilities. This adaptor enables the user to run a laptop computer using a powered wheelchair battery. The power source converter connects to the powerchair batteries and converts 24 volts to the voltage required to power a laptop computer. To operate, this converter requires the computer's automotive power adaptor and a model ASL804 power source adaptor.

Asl Proximity Sensor With Mono Port (Model Asl204-M)

The ASL Proximity Sensor with Mono Port, model ASL204-M, is a sensor switch designed for use by individuals with upper extremity disabilities. This "no touch" switch can be used with ASL proportional driver controls with power wheelchairs or for non driving purposes such as computer control. This single function switch has an activation range of touch to half inch. Activation occurs when it senses a hand or another part of the body in the activation area. This switch is intended to be used throu

Astaire Plus

The Astaire Plus is a lighweight adult wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish and dual axle that allows transition of seat to hemi-level. SEAT: 16-, 18-, 20-, or 22-inch width. UPHOLSTERY: Heavy-gauge flame-retardant black nylon upholstery. ARMRESTS: Removeable arm with padded nylon armrest. Removeable arm comes in a choice of desk- or full-arm styles, a

At Ease Adjustable Foot Support (Model Fs18Aj)

At Ease Adjustable Foot Support, model FS18AJ, is a foot support designed to promote proper posture, reduce fatigue and back strain and relieve stress on the legs, back and neck. The tilting support platform allows the user to vary the leg position and aids in circulation in the legs and feet. This foot support adjusts in height and angle and is ideal for workstations with multiple users. The platform is made of molded and texturized plastic and the frame is made of durable chrome tube. The supp

At Ease Standard Foot Support And High Foot Support (Models F300 & F600)

The At Ease Standard Foot Support and High Foot Support, models F300 and F600, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. Both models have a durable wooden platform laminated with a non-skid vinyl surface; a lightweight chrome frame; and rubber feet to hold it in place. DIMENSIONS: Models F30

Atb-Ultimate

The ATB-Ultimate is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches magnesium alloy powder coat frame. Frogs Legs rear elastic-polymer suspension is standard. The rear axel center of gravity is adjustable. The frame also had an adjustable angle push bar and custom cut aluminum side guards. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches i

Attaching Hardware Kit (Model 31096H)

The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).

Attaching Hardware Kit (Model 33066)

The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.

Attendant Wheelchair Control (Model 3320)

Used to expand the capability of a Multimode Interface by providing remote, attendant operation of the wheelchair. Uses a proportional joystick for precise control of wheelchair speed and direction. a toggle switch (with indicator light) is provided to ruen the attendant wheelchair control on and off. When the control is turned on, the Multimode Interface is automatically reset to standby status to prevent the wheelchair user from attempting to operate the wheelchair during attendant oepration.

Attractive Incontinence Pads (Models 11158 & 11159)

The Attractive Incontinence Pads, models 11158 and 11159, are designed for use by individuals with urinary incontinence. Intended to protect wheelchair cushions, sofas or car seats, these waterproof pads are made of a polyester top layer over an absorbent poly/rayon soaker, and a protective bottom layer that is impervious to moisture. The pads are machine washable. DIMENSIONS (WxL): 28 x 36 inches (model 11159) or 18 x 20 inches (11158). COLOR: Tapestry print.

Auto Style Hip Belt (Model Ee 3D/103-6000)

Wheelchair seat belt, nylon webbing and auto style push button buckle. Has a pair of iliac crest relief pads so the the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.

Automatic Wheelchair Anti-Rollback Device

The Automatic Wheelchair Anti-Rollback Device is a supplemental wheel locking device designed for use by individuals with mobility disabilities. As the individual rises from the chair, a pair of brake arms grab the tires to prevent the chair from rolling backwards. Once the user is seated, the device releases and goes into "stand-by" mode and the wheelchair returns to standard operation. Activated by spring tension, a padded lever beneath the wheelchair seat is depressed when the user is seated.

Automatic Wheelchair Anti-Rollback Device

The Automatic Wheelchair Anti-Rollback Device is a supplemental wheel locking device designed for use by individuals with mobility disabilities. As the individual rises from the chair, a pair of brake arms grab the tires to prevent the chair from rolling backwards. Once the user is seated, the device releases and goes into "stand-by" mode and the wheelchair returns to standard operation. Activated by spring tension, a padded lever beneath the wheelchair seat is depressed when the user is seated.

Avenger 3-Wheel Scooter

The Avenger is a heavy-duty 3-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter is equipped with a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME(LxW): 51.5 x 24.6 inches. The turning radius is 42 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey color. RWD: 24-volt, 4 pole sealed rear-whe

Avenger 4-Wheel Scooter

The Avenger is a heavy-duty 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter includes a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME (LxW): 51.5 x 25 inches. The turning radius is 48.5 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey. CONTROLS: 110-amp programmable controls. RWD: 24-

Awesome Grip

Awesome Grips are handrim covers designed for use by people who use wheelchairs. These removable, changeable covers fit the push wheels of manual wheelchairs and have a closed cell foam base with a fabric or leather cover. The covers do not slip on the rims, are designed not to slip in the hands, and provide a larger, softer gripping surface. The covers are available in leather, imitation leather, fabric, velveteen, and plush fabric. COLORS: Leather and velveteen covers are available in red or b

Axiom Mobility Xplorer 2

Axiom Mobility Xplorer 2 is a stroller designed for indoor or outdoor use by children with cerebral palsy, mobility disabilities, or severe physical disabilities. Features include an aluminum frame, adjustable footplate and straps, indoor swivel wheels, push-button wheel release, safety wrist strap, all-weather rain canopy, and tire pump. DIMENSIONS (HxLxW): 48 x 58 x 24 inches open and 14 x 40 x 20 inches folded and without wheels. The seat (LxW) is 15 x 15 inches and the back height is 28 inch

Axiom Mobility Xplorer 3

The Axiom Mobility Xplorer 3 is a stroller designed for indoor or outdoor use by children or adolescents with cerebral palsy, mobility disabilities, or severe physical disabilities. FRAME (HxLxW): Open the stroller is 52 x 48 x 27 inches and folded it is 14 x 40 x 23 inches. The frame is made from welded aluminum, and comes with a padded height-adjustable push handle, a sun canopy with viewing window, and a basket measuring 12 x 19 x 15 inches. SEAT (LxW): 15 x 18 inches. The reclining padded se

Axion Rotary Interface For Wheelchair Headrests

The Axion Rotary Interface™ for Wheelchair Headrests is a headrest accessory designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This device permits wheelchair headrests to rotate, and it attaches to most existing wheelchair headrests and hardware. This unit is quiet, free-running, and it does not require lubrication. The range of rotation can be limited or stopped.

Axle Bracket

The Axle Bracket is a rear wheel position adapter for wheelchairs designed to provide additional height adjustability for the axles on a wheelchair without drilling the frame. Two 9 mm aluminum plate brackets bolt into the existing adjusting holes on a wheelchair frame. The wheel axle can be bolted to the adjusting slot on the bracket. PROTOTYPE DEVELOPMENT: Designed by Andre Paquette for a user who could not adjust the seat height on the wheelchair low enough. Modifications by the wheelchair ma

B*mobile Ambassador (Model Dks500)

The B*MOBILE Ambassador, model DKS500, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. This scooter is equipped with a front basket, dual rear view mirrors, cell phone holder, and water bottle holder. FRAME (HxLxW): 37 x 47 x 25 inches. This scooter has front and rear suspension and a 43-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable reclining high-back seat has a headrest,

B*mobile Executive (Model Dks320)

The B*MOBILE Executive, model DKS320, is a three-wheeled scooter designed for multi-surface use by individuals with mobility disabilities. This scooter includes a front basket, dual rear view mirrors, and holder for a cell phone and water bottle. FRAME (HxLxW): 37 x 47 x 27 inches. This scooter has rear suspension and a 39-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable, reclining high-back seat is equipped with a full-range slidi

B*mobile President (Model Dks600)

The B*Mobile President, model DKS600, is a 4-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. Standard equipment includes a front basket, dual rear view mirrors, and a cell phone and water bottle holder. FRAME (HxLxW): 38 x 47 x 26 inches without the seat. The frame includes front and rear suspension. This scooter has a turning radius of 42 inches and can handle a maximum curb height of 4 inches. CONTROLS: Dynamic Rhino 110-amp controller. SEAT: Adj

B*mobile Sport Scooter (Model Dks200)

The B* Mobile Sport scooter, model DKS200, is a 3-wheel, lightweight, portable scooter designed for use indoors or outdoors by individuals with lower extremity or mobility disabilities. FRAME (HxLxW): 35 x 38 x 20 inches. The turning radius is 36 inches with a ground clearance of 2 inches. The frame disassembles into four parts for transport. CONTROLS: 45 amp DK CITY DS 45K. SEAT (HxW): 13 x 16 inches. This seat is contoured and has multiple height adjustments and 360-degree rotation. ARMRESTS:

B*mobile Travel Mate (Model Dks-280)

The B*Mobile Travel Mate, model DKS-280, is a four-wheeled portable scooter designed for use by individuals with mobility disabilities. This scooter includes a front basket and dual rear view mirrors. FRAME (HxLxW): 34 x 42 x 24 inches. This scooter has a turning radius of 41 inches. CONTROLS: DK CITY DS 70K 70 Amp controller. SEAT (HxLxW): 19 x 19 x 16 inches. The low-back, foldable seat is height adjustable with 360-degree seat rotation. ARMRESTS: 10-inch, flip-up arms. BRAKES: Intelligent reg

Baby Beach Jogger

The Baby Beach Jogger is a stroller designed for use with children with lower extremity, mobility, or severe physical disabilities. This stroller has a stainless steel frame that collapses for transport and storage, large wheels designed to handle beach and other outdoor terrain, and a protective hood. WARRANTY: Five-year warranty on frame and a 30-day money back guarantee.

Babylandia

Babylandia is a prototype designed for use by children with limited upper and lower extremity strength and coordination as a result of cerebral palsy, multiple sclerosis, congenital brain malformations, and spinal muscular atrophy.  It is a wheelchair seat that can be expanded to fit the needs of a growing child.  

Backpack Retriever

The Backpack Retriever is a wheelchair back pouch access aid designed for use by individuals who use wheelchairs. This device brings a backpack from behind the chair to within reach of the user with a click of a button. Without increasing the overall dimensions of the wheelchair, the unit is aesthetically designed to fit most power wheelchairs and does not interfere with accessibility through doorways. The patented linkage mechanism enables the device to be used in close or confined areas such a

Baller Elite

The Baller Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS:

Band-It

Band It is an ankle strap designed for use by individuals with lower extremity and neurological disabilities who use wheelchairs. This positioning device is designed to be secured around the ankle, with the body of the device extending over the top of the userÆs shoe and orthosis. The device has a dynamic component that allows some movement at the ankle to prevent joint stiffening and full body tonal reaction, and reduce buttock shear. The device has a side-squeeze closure that can withstand 250

Bariatric Chair / Stretcher (Model Mdtmbc835)

The Bariatric Chair/Stretcher, model MDTMBC835, is a stretcher wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This manual wheelchair converts to a rolling stretcher with the flip of a switch. FRAME: 39 inches wide. The chair / stretcher comes with an IV rod and oxygen holder. SEAT: The seat is 31 inches wide. The back has an electrically-driven recline function and is infinitely adjustable. ARMRESTS: Includes independently adjustable armrests. FOOTRE

Bariatric Transport Stretcher (Model Mph08S1190132)

The Bariatric Transport Stretcher, model MPH08S1190132, is a heavy-duty stretcher designed for use by individuals with mobility disabilities or spinal cord injury. This stretcher is intended specifically for transferring and transporting a bariatric individual. It has a reinforced frame, high-density foam mattress, full perimeter non-marring bumper, large casters, 3-position vertical side rails, and a hydraulic folwer back rest. It also has a beachwood powder-coat finish and is chrome plated. DI

Bariatric Travel Chair

The Bariatric Travel Chair is a lightweight wheelchair designed for individuals with limited or no lower body mobility. Chair is foldable has all terrain wheels and a maintenance free aluminum frame that won't rust. Features swing away footrests, seat belt, rear brakes, padded armrests, nylon seat and rear storage pouch.

Bariatric Wheelchair (Models W35795, W35795, & W35797)

The Bariatric Wheelchair is an adult manual wheelchair designed for use by obese individuals with mobility disabilities or spinal cord injury. FRAME: Features double square crossbraces with twin struts and reinforced and gusseted 5/8 inch rear axles. SEAT (WxD): The seat is available in 26 x 20 inches (model W35795), 28 x 20 inches (model W35796), or 30 x 20 inches (model W35797). The seat to floor height is 18 inches. UPHOLSTERY: Nylon upholstery with triple Tirtilene seat liner for added supp

Barrett (Models 7 & 10)

The Barrett 7 and 10 models are adult manual wheelchairs designed for people with lower extremity or mobility disabilities or spinal cord injury. They are suitable for indoor and outdoor use and can be folded into a smaller size. The Barrett 7 is designed to be manually propelled by the user while the Barrett 10 can only be propelled from behind by an attendant. A wide range of accessories and upholstery is also available for these hand-built chairs that feature an easy to clean durable chrome f

Barrett Baby

Baby Barrett is a child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. This folding wheelchair can be attendant- or self-propelled and comes with a document pocket and a user manual. FRAME: Folding frame with a chassis color choice of rich claret, electric red, navy blue, black, silver, or chrome. Anti-tip rollers/levers are optional. SEAT (LxW): 10 x 12, 11 x 12, 12 x 13, or 13 x 13 inches. An adjustable waist belt

Barrett Combi (Models 8 & 9)

The Barrett Combi, models 8 & 9, are adult wheelchairs designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 29 x 30 x 12 inches (Combi 8); 29 x 26 x 12 inches (Combi 9) folded sizes; tubular alloy steel, full gloss stove finish. SEAT: 17 x 17 inches for both models. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Lever assembly. WHEELS: Combi 8 (22 inch); Combi 9 (12.5 inch). CAPACITY: 226 pounds for both models. WEIGHT: C

Barrett Gem

The Barrett Gem is a powered wheelchair designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 22 x 30 x 14 inches folded size; tubular steel, chronium plated. CONTROLS: Joystick - fully programmable for speed/acceleration and can be supplied with remote, chin, or attendant control capabilities. SEAT: 14 x 16 / 15 x 16 / 17 x 17 inch. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Electro-magnetic. WHEELS: 7 inch or 12.5 inch a

Barrett Maxi

The Barrett Maxi is a self-propelled adult wheelchair ergonomically suitable for a larger stature user. FRAME: 29.5 x 29 x 12 inch folded size; tubular alloy steel; full gloss stove finish. SEAT: 18 x 16 inches. ARMRESTS: Detachable for tray usuage with molded pads. BRAKES: Lever assembly. WHEELS: 24 inch pneumatic tyre. CAPACITY: 252 pounds. WEIGHT: 41 pounds. Several accessories are also available.

Barrett Meteor

The Barrett Meteor is a lightweight, sports wheelchair designed for everyday and leisure pursuits. FRAME: 28 x 27 x 9 inches folded size; tubular alloy steel; full gloss stove finish. SEAT: 16 x 16 inch. BRAKES: Lever assembly. WHEELS: 24 inch. CAPACITY: 224 pounds. WEIGHT: 31.5 pounds. Several accessories are also available.

Base Mate Modular Adaptive Seating System

Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.

Basket For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the adaptation consists of a commercially-available plastic-coated wire basket that fits against the back of the chair between the rear wheels. The basket is secured to the chair with octopus straps to enable removal when not in use but keeping the basket from swinging when on the chair. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2,

Battery Booster, The

Boost charger for 24 volt electric wheelchairs. Charges chairs from 12 volt supply; cigarette lighter adapter, automotive battery chargers, etc. Can also be used to operate 12 volt accessories from wheelchair batteries. Can fully charge batteries in 3 to 4 hours; however, designed to give quick "boost" charge while driving or sitting. Installs on wheelchair. Some vehicle adaptation may be necessary. Size 5 by 2.5 by 1.5 inches; weight less than 1 pound.

Bcw 600 Wide Wheelchair

The BCW 600 Wide Wheelchair is a folding manual wheelchair designed for use by large adults. FRAME: Stainless steel folding frame with a baked urethane finish to ensure chip, scratch, and fade resistance. A double X-brace and 4 point telescoping at each corner to strengthen design are standard. The chair folds to 13 inches for transport and storage. A rigid frame is available. Black is the standard frame color; red, teal, silver, and charcoal chrome are available at an extra charge. Anti-tippers

Bcw Power Wheelchair (Models Bcwpr 2018, Bcwpr 2218, Bcwpr 2418 & Bcwpr 2618)

The BCW Power Wheelchair is a powered wheelchair designed for use by obese persons with mobility disabilities. FRAME (WxDxH): Model BCWPR2018 is 27.5 x 40 x 41 inches; model BCWPR2218 is 29.5 x 40 x 41 inches; model 2418 is 31.5 x 40 x 41 inches; and, model BCWPR 2618 is 33.5 x 40 x 41 inches. All models have a heavy-duty, stainless-steel rigid frame with a baked urethane finish to resist chipping, scratching, and fading. The frame comes standard in black. Red, teal, silver, and charcoal chrome

Bcw Recliner (Models Rcbc2018, Rcbc2218, Rcbc2418 & Rcbc2618)

The BCW Recliner is a manual wheelchair with a powered reclining back designed for use by obese persons with mobility disabilities. FRAME: Heavy-duty, stainless-steel frame with double crossbraces. The frame features a baked urethane finish to resist chipping, scratching, and fading. The standard frame is black; red, teal, silver, and charcoal chrome are available at an extra charge. Model RCBC2018 is 28 inches wide by 42 inches deep; models RCBC2218 is 30 inches wide x 42 inches deep; and RCBC2

Beach Access Chair

The Beach Access Chair is a beach wheelchair designed for use by individuals with mobility disabilities. This sturdy lightweight all- terrain chair a can be used in sand, snow, and other soft soils. The chair comes standard with an umbrella and storage bag. FRAME: White PVC plastic frame disassembles into three pieces for transport. The frame is 34.5 inches wide. SEAT: Seat height is 25 inches. A safety belt is included. CUSHION: Included. ARMRESTS: Included. BRAKES: Single motion park brakes.

Beach Baby All Terrain Stroller (Model Bbs 100)

The Beach Baby All Terrain Stroller, model BBS 100, is a stroller designed for use by children with mobility disabilities. FRAME (WxHxL): 35 x 39 x 43 inches. The white PVC tubular frame folds for storage and transport. All hardware is stainless steel. SEAT: A reclining seat with a seatbelt is included. The stroller also features an underseat storage area. UPHOLSTERY: Mesh sling upholstery. Three wheels with aluminum axles and 12 x 6 inch balloon tires by Roleez Wheels, Inc. (see separate entry)

Beach Cruzr & Beach Cruzr 4 Two

The Beach Cruzr and the Beach Cruzr 4 Two are powered beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front

Beach Econo Kit

The Beach Econo Kit is a kit for converting a wheelchair or stroller into an all-terrain wheelchair or stroller designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. The kit consists of four balloon wheels from Roleez Wheels, Inc. (see separate entry), two pre-drilled anodized axles, u-bolts, and wheel clips. To mount, the rear wheels are popped off, the axle tubes are slid across the frame and bolted on, and the balloon wheels are slid

Beach Hippocampe

The Beach Hippocampe is a three-wheeled beach and all-terrain wheelchair designed for use by individuals with mobility disabilities. FRAME: The frame is available in small, medium, large, and extra-large. The small frame is 46 inches long, the medium frame is 50 inches long, the large frame is 54 inches long, and the extra-large frame is 62 inches long. Folded dimensions (HxL) are 15 x 45 inches for the small frame, 15 x 49 inches for the medium frame, 15 x 53 inches for the large frame, and 15

Beach Stroller

The BeachStroller is a stroller designed for use by children with lower extremity disabilities, mobility disabilities, and spinal cord injury. The stroller is lightweight and collapsible, and uses all-terrain Roleez Balloon Tires from Roleez Wheels, Inc. (see separate entry). OPTIONS: Storage compartment; cup holder; umbrella. DIMENSIONS (HxLxW): 36.5 x 40.5 x 31 inches. CAPACITY: 75 pounds. WEIGHT: 26 pounds.

Beach Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To design and build a lightweight, portable wheelchair adaptation for individuals with mobility disabilities to enjoy the beach. The Beach Chair is created by rolling up two half shells which are 5 inches wide to the diameter of the wheelchair wheels (in this case 24 inches). These were created using ¼ inch aluminum but lexan plastic is also suggested. On end of each shell has a lip overlap to ensure the two halves line up and fight snugly. Each half

Beamer Personal Transport Vehicle

The Beamer Personal Transport Vehicle is a powered wheelchair alternative designed for use by individuals with lower extremity disabilities or people who lack stamina. The Beamer is an electric transportation device on which the user stands when in motion. 500 watt motors in the hub of each of the two front wheels power this device. It has a horn, brake light, turn signals, and tail light. The vehicle has two back wheels for added stability, reinforced steel rider platform with high-impact plas

Bean Bag Dinner Tray

The Bean Bag Dinner Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed to rest directly on the user's lap, this plastic tray attaches to a bean bag with a hook and loop strap. The removable bean bag provides a form fitting and comfortable support on the user's lap. The tray's raised edges are intended to stop items such as cups and plates from accidentally sliding off the tray. DIMENSIONS (WxD): 16 x 12 inches. COLOR:

Bec Pak

Wheelchair add on power drive with power pack easily placed off or on a manual wheelchair. 24 volt system, two 12 volt batteries, solid state controls, automatic electronic brakes. Battery charger included. Arc of joy stick, 7/8 inches from neutral position to full speed. Pressure required to operate, 3 ounces. Proportional control , can be positioned on left or right. High or low speed gears. Battery pack weighs 47 pounds. Up to 10 miles per charge. Operates at speeds up to five miles per hour.

Bentley

The Bentley is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This chair can be propelled by hand and/or foot in and out of tilt. FRAME: The overall width with 12- or 16-inch wheels is the seat width plus 9.5 inches; with 20- or 24-inch wheels and hand rims the overall width is the seat width plus 10.5 inches and without hand rims, the width is the seat width plus 9 inch

Better Board Slant Boards

The Better Board Slant Board is a bookholder and table top writing desk designed for use by individuals who use wheelchairs or who have upper extremity. It is made of durable corrugated plastic, it has attached plastic clamps that hold paper well and includes non-slip feet to help it stay in place while in use. It has a 20-degree angle and can be used for reading, writing and copying. When not in use, this board folds to a thickness of 0.75 inch for stacking and storing. SIZES: Small and large.

Bi-Fold Sensor Pad For Chair And Bed

The Bi-Fold Sensor Pad is a discrete sensor that alerts a caregiver when their patient has fallen from their bed or chair. This dual purpose sensor pad can be folded. In it’s folded format the pad measures 15 inches wide x 15 inches long and can be placed on the wheelchair either above or below the seat cushion. In the unfolded position it measures 15 inches wide x 30 inches long and can be placed under or over the mattress. The pad is liquid resistant.

Bi-Level Footrest Extender (Series 7033)

The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and

Bib Kit (Model 3390)

Used for mounting a Model 3185 joystick for chin operation. The bib uses velcro straps to secure the bib around the neck and rib cage, and incorporates adjustable mounting harware to permit a wide range of joystick positioning.

Big Ben Shopper

Wheelchair back pouch attaches to handgrips of wheelchair with straps. Room for complete change of clothes, lap robe, or other large items. 16 by 17 inches. Black or saddle. Vinyl.

Big Bounder H-Frame Power Wheelchair

The Big Bounder H-Frame Power Wheelchair is a heavy duty powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated H-style TIG welded steel frame. The frame includes heavy duty 12 position adjustable suspension forks, anti-tipping wheelie wheels, sliding dual group 27 battery box with safety reflectors, and built in taillights. CONTROLS: UE1D electronic controls with 6 programs and bi-directional select swit

Big Bounder Manual Wheelchair

The Big Bounder Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. Options include a folding frame, frame reinforcements, frame colors other than black, lighting, and an electric horn. SEAT: 21 to 48 inch seat widths are available. Options include power seating systems

Binocular Clamp

The Binocular Clamp is an extension arm for accessories designed to enable a persons to use a pair of binoculars without having to support the weight of them. The device consists of a 360-degree swiveling clamp fixed to the end of a 13 mm diameter stainless steel rod. The rod mounts onto the fitting of a wheelchair. Binoculars are attached to the device with an off- the-shelf Kaiser binocular fitting. PROTOTYPE DEVELOPMENT: Designed by Colin Knauf for a user with weak arms who can raise the bino

Biosoft Palm Guard Gloves

The Biosoft Palm Guard Gloves are push gloves designed to protect the wearer's hands while propelling a wheelchair. These gloves feature an elastomer palm grip to absorb shock, vibration, and pressure. These pull-on fingerless gloves have an open-weave mesh back with adjustable Velcro closure. SIZES: Small, medium, large, and extra large.

Birdie Buddy

---- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair mount for a camera and binoculars for an avid photographer and birdwatcher with quadriplegia. The Birdie Buddy clamps securely to a bar on the wheelchair base frame, holds a camera or binoculars at eye level, and folds down along the side of the wheelchair when not in use. This device supports the weight of the camera or binoculars, convenient switching between the two pieces of equipment, and an adjustable viewing angle. T

Black Hawk Chief (Model 107-Zrx)

The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv

Black Poly Spoke Guard With Alloy Hand Rim

The Black Poly Spoke Guard with Alloy Hand Rim is a spoke protector with attached handrim designed for use by people with lower extremity or mobility disabilities or spinal cord injury who use manual wheelchairs to play wheelchair rugby and other wheelchair sports. This unit is for use on the Melrose Rhino wheelchair rugby chair (see separate record). The poly spoke protector is riveted to a ring that is welded to the inside of an alloy handrim. The unit is attached to a wheel (not included) wit

Black Poly Spoke Guards With Rubber Hand Rims

The Black Poly Spoke Guards with Rubber Hand Rims are spoke protectors with attached handrims designed for use by people with lower extremity or mobility disabilities or spinal cord injury who use manual wheelchairs to play wheelchair rugby and other wheelchair sports. The poly spoke protector is riveted to a ring that is welded to the inside of a rubber handrim. The unit is attached to a wheel (not included) with 6 or 12 tabs that mount either onto the rim or close in. The spoke protectors sit

Black Texture Coated Footplates.

Footplates for Quickie wheelchairs. 90 degree/90 degreee aluminum footplates with a painted black texture surface. Replaced textured tape to provide nonslip surface.

Black Trays

The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.

Bobcat 3 Wheel Compact Scooter (Models S38600 & S38601)

The Bobcat 3 Wheel Compact Scooter, models S38600 and S38601, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 38 x 19 x 38.5 inches. The turning radius is 32.2 inches. It has front 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into four pieces for transport, and the tiller folds down for stor

Bobcat 4 Wheel Compact Scooter (Models S38650 & S38651)

The Bobcat 4 Wheel Compact Scooter, models S38650 and S38651, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 x 19 x 35.5 inches. The turning radius is 35.4 inches. It has 2-inch anti-tip wheels and a front large carry basket. The scooter can be disassembled into 4 pieces. The base is available in red (model S38650) and blue (S386

Body Up Evolution

The Body UP Evolution is a transport chair, caster commode, shower chair and transfer lift sling designed for use by people with balance, lower extremity or mobility disabilities, or spinal cord injury. FRAME (HxLxW): 44 x 35 x 18 inches. This chair has a stainless steel frame with a hinged back so that a person can be loaded from the rear of the frame. The frame separates into two pieces for transport or storage. SEAT: Sling seat that can be raised or lowered. To facilitate loading, the seat ca

Bogen Multi Position Support Arm & Super Clamp

The Bogen Multi-position Support Arm and Super Clamp are mounting hardware for communicators and other accessories designed to be mounted to a table or wheelchair. The Support Arm has a fully articulated arm (three universal joints) with 90 degree pivotable and 360 degree rotatable ends, and an elbow that rotates 360 degrees. The adjustable, one-control handle located at the elbow joints locks all three joints firmly. The arm can be mounted permanently, or used with the Super Clamp. The Super Cl

Boing!

The Boing! is a fully adjustable manual sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: A rigid, rear tube assembly and fully adjustable frame. This chair is available in more than 20 standard and custom finishes. Anti-tips, frame protectors, and push handles are optional. SEAT: 13 to 18 inches wide and 14 to 19 inches deep. The folding backrest adjusts in height and angle, with a choice of height adjustment ranges from 8 to 18 inches. Si

Bolero

Bolero is a four-wheel scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 1340 x 580 millimeters. The midsize chassis separates for transportation and is available in red or blue. A headlight and turn signal are inlcuded. RWD: Rear-wheel drive with with mechanistic free-wheel drive transmission. SEAT: Automobile style, swing-away captain's seat. ARMRESTS: Height and width adjustable flip-up armrests. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: All f

Boss Hd Equalizer Bariatric Tilt System

The BOSS HD Equalizer Tilt System is a powered tilt-in-space system designed for use by individuals with mobility, neurological or severe physical disabilities. This tilt-in-space system is designed to be mounted on a heavy-duty power wheelchair base (not included) such as the PaceSaver BOSS 6 powered wheelchair (see separate entry). CONTROLS: Integrated programmable Shark joystick controller. A swing-away controller mount and attendant control are optional. SEAT (DxW): (18 to 26) x (22 to 30) i

Bottoms Up Bar

The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha

Bounder Manual Wheelchair

The Bounder Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. SEAT: 16, 17 or 18 inch widths. Options include custom seat width or length, custom back height, power seating system (recline, tilt, or seat elevator), and headrests. UPHOLSTERY: Standard duty sling upholst

Bounder Plus H-Frame Power Wheelchair

The Bounder Plus H-Frame Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder- coated H-style TIG welded steel frame with heavy duty 12-position adjustable suspension forks, anti-tipping wheelie wheels, built-in taillights, and sliding battery box with safety reflectors. Color frame options are available. CONTROLS: UE1D premium electronics (6 programs with bi-directional select switch). O

Bounder Plus Manual Wheelchair

The Bounder Plus Manual Wheelchair is a heavy duty manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with heavy duty 12 position adjustable suspension forks and anti-tipping wheelie wheels. Options include frame colors other than black, a folding frame, frame reinforcements, and an electric horn. SEAT: 14 to 20 inch widths are standard. Options include custom seat width or length, including

Bounder, Bounder Plus, & Big Bounder Manual Gurney

The Bounder, Bounder Plus, and Big Bounder Manual Gurneys are manual stretcher wheelchairs designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder-coated tube frame with reinforced side and end rail mounts, made using all steel TIG welded box frame construction. Options include frame reinforcements; side and end rails; drink holder; frame colors other than black and upholstery; sliding drawer at front of gurney; storage tray located approximat

Bounder, Bounder Plus, & Big Bounder Power Gurney

The Bounder, Bounder Plus, and Big Bounder Power Gurneys are powered stretchers designed for use by individuals with severe physical disabilities or spinal cord injury. FRAME: Black powder- coated steel tube frame with reinforced side and end rail mounts, made using TIG welded box frame construction. CONTROLS: UE1D electronics featuring six programs with a bi-directional select switch and electric brake controls. Options include a programmer for electronics; attendant controls; custom hand contr

Bracket To Hold Power Packs For Wheelchairs

CUSTOM ADAPTATION PURPOSE: To enable a controller for a power assist for a manual wheelchair to be attached to wheelchair push handles. The power assist units are suspended under the wheelchair seat and the controllers are attached to the wheelchair push handles with the included full-circle Bakelite clamp for access by caregivers.When the clamp did not fit over the rubber handgrips, a split metal clamp was designed. The top lock was macined of aluminum and threaded for bolts. The bottom was ma

Brain Interface Steering System For Wheelchair

PROTOTYPEPURPOSE: To develop a hands-free wheelchair steering system through brain wave activity for persons with limited mobility. Toyota, in collaboration with other researchers in Japan, has developed one of the fastest systems for analyzing brain waves. This new technology requires only 125 milliseconds (125 thousandths of a second) to read brain waves. An individual uses the prototype system by placing a cap on his or her head that reads brain signals through an electroencephalograph (EEG)

Brake Attachment

This Brake Attachment is for wheel brakes on a wheelchair. The brake applies one square inch of surface against wheel to increase the holding power of the brakes. No tools are needed to attach brake to a wheelchair.

Brake Extension (Model 86)

The Brake Extension, model 86, is a wheel lock extension lever designed for use by individuals who are unable to reach or manipulate standard wheel locks on wheelchairs. These devices attach to the existing wheel lock brake of a wheelchair and is held in place by a lock knob.

Breath Actuator (Model 3365)

A 4-direction, multiple switch actuator used to convert varying amounts of breath suction and pressure (sip and puff) into the directional commands required by the Multimode Interface for mode selction and oepration. The Model 2422 Breath Tube Kit is used to provide a means of sending these sips and puffs to the Breath Actuator.

Breath Tube Kit (Model 2422-2)

Used for supplying sip and puff directional commands to the breath actuator. The Breath Tube Kit includes a wingaway strap clamp mount for attachment to a standard 7/8 inch diameter wheelchair/power recliner back bar. The mount permits the breath tube to be pivoted away from the user by an attendant and returned to its original position without the need to readjust the flexible breath tube.

Breez 1025

The Breez 1025 is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (HxLxW): 42.5 x 27 x 26 inches. The overall length with footrests is 50 inches. The chair has a steel platform under the seat for carrying cargo and fr

Breez 1025-G

The Breez 1025-G is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. The chair is operated by an attendant or caregiver who walks behind the chair. This chair is equipped with a standard stainless steel IV pole. FRAME (LxW): 47.5 x 34 inches with armrests and footrests. The chair has a steel platform under the seat with 1.8 cubic feet for carrying cargo, and it has

Breezy

The Breezy is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a choice of chrome, silver texture, or blue finishes. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available at no cost. Standard seats are available in 14-, 16-, or 18-inch widths; the standard seat depth is 16 inches. A 20-inch wide or 18-inch deep seat is available at an extra charge. The seat height depends upon thw wheels and cast

Breezy Basic

The Breezy Basic is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. A non-padded seat is available. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height adjusts from 17 to 19 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, heig

Breezy Le

The Breezy LE is a manual drive, lightweight wheelchair built for adults. FRAME: Folding frame in a silver texture finish. Push handles are standard and anti-tip tubes are optional. SEAT: A padded seat is standard. The seat is available in 16 x 16 inches or 18 x 16 inches. The back height is 17 inches. CUSHION: No. UPHOLSTERY: Sling upholstery is standard. ARMRESTS: Flip-back armrests with full- or desk-length pads are standard. Flip-back, height-adjustable armrests are optional. BRAKES: High-

Breezy Ultra 4

The Breezy Ultra 4 is a folding manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Non-corrosive aluminum frame. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 15.5 to 19.5 inches. UPHOLSTERY: Nylon upholstery. ARMRESTS: Adjustable-height padded armrests. Also available are flip-back arms in either desk or full length. CASTERS: 6 or 8 inch angle-adjustable casters. WHEELS: 20-inch full profile or 24-inch low profi

Brella Buddy

Brella Buddy is a hands free wheelchair umbrella holder which does not require attachment to a wheelchair. No heavy accessories to carry around when it is not raining. The Brella Buddy, hands free wheelchair umbrella holder will hold your umbrella for you and protect you from the rain while keeping your hands free to propel your wheelchair. The Brella Buddy hands free wheelchair umbrella holder is designed with a two strap, adjustable system to hold it comfortably in place. There are two pockets

Brix

Brix is a manual child's wheelchair and stroller designed for use by children with lower extremity disabilities, mobility disabilities, and spinal cord injury. FRAME: The frame includes a support roll for safety and an adjustable bow handle that can be used to push the stroller. WHEELS: Comes with a front wheel fork and transparent wheel protector. The hubcab features colorful embossed animals and dolphins.

Broda Auto-Locking Glider Chair (Models 100-10Al, 100-15Al, & 100-20Al)

The Broda Auto-Locking Glider Chair is a rocking chair designed for use by individuals with Alzheimers disease or dementia. The chair begins to glide once the user sits down, and stops gliding when the user begins to vacate the chair. It also features a caregiver-operated lock to prevent unwanted gliding. The smooth gliding action produces a calming effect and can help reduce the need to wander. It also provides mild exercise. The frame is made of 16-gauge powder coated tubular steel with a stab

Broda Basic Chair (Model 30Vt)

The Broda Basic Chair, model 30VT, is a wheeled geriatric recliner designed for use by individuals who need support while sitting. This chair features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include a seat with tilt infinitely adjustable up to 25 degrees, a reclining back with the recline infinitely adjustable up to 45 degrees, an adjustable-length elevating legrest, a removable flip-down

Broda Basic Chair (Model 80V)

The Broda Basic Chair, model 80V, is a geriatric chair designed for use by individuals who need support while sitting. It is designed for users who require a fixed hip angle of 90 degrees and/or those requiring tilt in space without recline. The seat tilt is infinitely adjustable up to 38 degrees. Other features include an adjustable elevating legrest, removable flip-down footrest with adjustable footplate angle, armrests with an independent height-adjustment range of 4 inches, removable upper b

Broda Elite Chair (Model 35V)

The Broda Elite Chair, model 35V, is a geriatric chair designed for use by individuals who need support while sitting. This chair has up to 25 degrees of infinitely-adjustable seat tilt and up to 45 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double- plate footrest with adjustable footpla

Broda Elite Chair (Model 785)

The Broda Elite Chair, model 785, is a recliner chair designed for use by individuals who need positioning support while sitting. This tilt-in- space chair has up to 90 degrees of infinitely- adjustable back recline and up to 38 degrees of infinitely-adjustable seat tilt. It features a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. The removeable swing-away armrests are individually height adjustable, with push-

Broda Elite Chair (Model 85V)

The Broda Elite Chair, model 85V, is a geriatric chair designed for use by individuals who need support while sitting. This tilt-in-space chair has up to 38 degrees of infinitely-adjustable seat tilt and up to 90 degrees of infinitely-adjustable back recline. It has a suspension system of straps that conform individually to the user's body, thus suspending the user's weight across multiple points. Other features include an adjustable elevating legrest, single- or double-plate footrest with adjus

Broda Tilt Wheelchair (Model 587)

The Broda Tilt Wheelchair, model 587, is a tilt-in-space low seat wheelchair designed for indoor use by individuals with lower extremity, mobility, or balance disabilities. The front pivot seat tilt allows for proper positioning of the foot on the floor for propelling the chair while tilted. FRAME (LxW): 51 x seat width plus 10.5 inches. The frame is 16-gauge tubular powder coated steel. Anti-tippers are included. SEAT (LxW): Standard seats are 17 x 16 inches or 17 x 18 inches. Optional seat dim

Bt

The BT is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: Frogs Legs Ultra

Bt-Atb

The BT-ATB is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches in 1-inch increments. The backrest angle is adjustable from 90 to 100 degrees, and there is a 7075 aluminum CNC water-jet cut backrest plate. UPHOLSTERY: Laminated carbon fiber sail

Bt-Ballistic

The BT-Ballistic is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features custom machined billet down tubes and axel cross bar and a mirror polish finish to echo motorcycle styling. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle

Bt-G Tribal

The BT-G Tribal is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features 6061 T6 CNC machined tribal-themed cutouts. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbo

Bt-Mg

The BT-Mg is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: 3.25

Bt-Mg-A

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated car

Bt-Mg-As

The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Frogs Legs rear elastic-polymer suspension is standard. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075

Bt-Trail

The BT-Trail is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for outdoor use on unpaved surfaces. To enhance stability, the BT-Trail’s design features a wider distance between the casters, and the casters are positioned forward to be even with the footrest to create a longer wheelbase. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 1

Bt-X

The BT-X is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for indoor and outdoor use on a variety of terrains, including unpaved paths and beaches. To facilitate this versatility, the BT-X is designed to fit multiple wheels and casters in addition to those include with the standard model. FRAME: Aluminum alloy frame and forks. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is availa

Buckles & Belts

Wheelchair seatbelts with 2 types of hook and loop closures, molded plastic Delrin buckle (operates by pinching both sides of buckle simultaneously), lever aircraft buckle, or push button aircraft buckle. Two piece or single continuous belts. Available sizes from 48 to 108 inches.

Buggy Pioneer 5 Dlx S540/s541 Twin Front Wheel Micro

The Buggy Pioneer 5DLX S540/S541 Twin Front Wheel Micro Scooter is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and multi-function display console. FRAME (HxLxW): 32 x 39 x 20 inches. The ground clearance is 2.4 inches and the turning radius is 38 inches. This scooter disassembles for transport or storage and is available in blue and red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller an

Bugzi

Bugzi is a powered indoor chair designed for children ages one to five whose mobility has been impaired by physical and neurological disabilities. It offers a unique opportunity for pre-school children with disabilities to experience independent mobility. Bugzi is an ideal introduction to switch and joystick use. It is compact and maneuverable. Each Bugzi is tailored and adapted to the individual child’s needs, with the capacity to adjust seating and controls as he or she grows. Bugzi is a

Buzzard All-Terrain Chair

The Buzzard is an all-terrain wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain chair is intended for use in outdoor activities such as hunting, fishing, or getting around rough terrain. FRAME (LxW): Overall dimensions 60 x 36 inches. The chair has a steel frame with monoshock suspension; an optional gun rack is available. The frame is available in any color. UPHOLSTERY: Waterproof mesh upholstery. BRAK

Buzzaround 4-Wheel Scooter (Model Gb-104)

The Buzzaround 4-Wheel Scooter, model GB-104, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40.75 x 21 inches. The turning radius is 34.5 inches and the ground clearance is 1.75 inches. The frame disassembles into two parts for transport. The scooter is available in blue or red. CONTROLS: 70 amp programmable PG S-drive. RWD: 24-volt sealed transaxle rear-wheel drive. SEAT: The 360-degree swivel seat is 15 inches deep

Buzzaround Lite 3-Wheel Scooter (Model Gb-103)

The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny

Buzzaround Lite 4-Wheel Scooter (Model Gb-105)

The Buzzaround Lite 4 -wheel scooter, model GB-105, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 41.75 inches and the ground clearance is 2 inches. The frame disassembles into 4 parts for transport. The scooter comes with three sets of interchangeable shroud panels in vermillion red, arctic blue, and sahara. CONTROLS: 45 amp programmable drive. RWD: 24-volt direct current s

Buzzy

The Buzzy is an add-on power unit designed for use with a manual wheelchair. This motorized tow device provides powered mobility for shopping and recreation without requiring the user to transfer. The user wheels up to the unit, grabs the handlebar, and pushes the thumb throttle. The unit has variable speeds. The Shopping model, which is intended for use in supermarkets and other stores, has a lower top speed than the Recreation model. An on-board microprocessor allows the user to reset the top

C300 Corpus

The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included.

C300 Corpus Junior

The C300 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 24.25 x 39.15 inches. Minimum turning radius is 40 inches. The C300 Corpus Jr. has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, purple ice and chili pepper red. Front anti-tippers are included. CONTROLS: Integrated programmable R

C300 Ps

The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d

C350 Corpus

The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr

C350 Ps

The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti

C400 Corpus

The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra

C400 Corpus Junior

The C400 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34 x 24 x 41.5 inches. Minimum turning radius is 45 inches. The C400 Corpus Jr. has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated pr

C400 Lowrider

The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated

C400 Vs Junior

The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the

C500 Corpus

The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL

C500 Lowrider

The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON

C500 Vs

The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t

Cam Belt With Grommets (Model Es-350)

The Cam Belt with Grommets, model ES-350, is a child belt restraint for pelvic stability. The two-piece belt is made of automotive seatbelt nylon and has a nylon buckle. The belt attaches with grommets to various therapeutic equipment and seating aids. The nuts, bolts, and washers required for installation are included. DIMENSIONS (LxW): 40 x 2 inches.

Canadian Padded Transfer Board

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded transfer board with a plinth which fits into the forward arm rest socket of a standard wheelchair. Transfer board made of 15 by 6 1/2 inch plywood, a base plate of iron or steel, an iron water pipe, a sheet (10 by 6 inches) of firm leather or plastic, foam padding and a slippery fabric cover. The board is used in place of either arm of the wheelchair. Includes instructions and diagrams. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Wightwi

Capella 45

Capella and Capella45 is a dynamic tilt-in-space wheelchair designed for individuals with mobility or neurological disabilities. The chair adjusts to redistribute the user’s body weight for optimal positioning purposes. The Capella offers 20 degrees of tilt, standard on-chair adjustment seating system, a range of seat-to-floor heights and a streamlined design.

Capstan Handrim

The Capstan Handrim is a wheelchair handrim designed for people with lower extremity or mobility disabilities or spinal cord injury. This aluminum alloy handrim is plastic-coated intended for users with good arm and shoulder strength but poor hand and finger grip. This handrim is fitted 8 projections at either 45 or 0 degrees (vertical). There are 3 different mounting systems for the hand rims: standard tab, close-in tab, or riv-nut. OPTIONS: 10 or 12 projections. SIZES: For 20-, 22-, 24-, 25-,

Carbon Core Wx2.5

The Carbon Core WX2.5 is a rear wheelchair wheel for people with mobility disabilities, spinal cord injuries and other people who use manual wheelchairs. This very lightweight wheel is has a rim of heat treated 6061 T6 aluminum with a double-walled design, 7075 T6 aluminum spoke nipples and 20 continuous carbon fiber spokes. It fits standard .5-inch axles. DIMENSIONS: Available in 24 inch or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 2.5 pounds (24 inch) or 2.6 pounds (25 inch). COLOR: Blac

Carbon Series Back Support

The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou

Carebike

The Carebike is a cycle attachment for wheelchairs. The unit comprises an anodized aluminum platform on wheels that attaches to a 21-speed comfort bike. It is designed to offer friends, family members and caregivers the convenience of taking a bike ride while still being close at hand to assist the wheelchair user. The wheelchair fits on the platform with the Carebike attached at the rear, giving the biker complete steering, stopping, and starting control.

Cargo 16 Wheelchair Pouch

Wheelchair back pouch. Cordura nylon fabric with look of cotton duck. 1, 000 cubic inches inner space. Removable shoulder strap. Full width outer and back pockets. Zipper opening top. Strap loops on pouch slip over wheelchair push handles folds with wheelchair. Specify narrow or regular wheelchairs, 12 to 14 inches wide.

Carony Transportation System

Carony is a transport wheelchair base designed for use by individuals with severe physical disabilities or mobility disabilities who have difficulty entering and exiting minivans, pickup trucks, and full-size vans. The system operates in conjunction with a Bruno Turny or Turnout powered seat base. The user glides along a rail from the vehicle seat onto the wheeled base, remaining seated the whole time. A hand control glides the seat out of the vehicle then lowers the seat. The Turny or Turnout p

Carpeted Double Scooter (Model Ap 245)

The Carpeted Double Scooter, model AP 245, is a scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. This scooter board is made of plywood covered with padded carpeting, and has eight ball bearing casters. The double board can be separated into two smaller scooters by releasing a lock hitch. DIMENSIONS (LxW): 32 x 12 inches (double scooter); separate scooters are 16 x 12 inches. The board is 5/8 inches thick. COLOR: Boards are available in asso

Carpeted Double Scooter Board (Model Bk8154)

The Carpeted Double Scooter Board, model 8154 is a scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. Constructed of solid plywood padded and covered with plush carpet, this double scooter facilitates optimal movement, providing excellent sensory stimulation. It also aids in the development of head and trunk control and arm strength in non-ambulatory children. The scooter can be separated by releasing the Sure-Lock hitch into two 12 inch by 1

Carpeted Scooterboard (Model 31717)

The Carpeted Scooterboard, model 31717, is designed primarily for use with children to encourage extension, provide vestibular stimulation, and promote head and upper trunk control. The unit is padded and carpeted, has chamfered corners, and includes 4 ball casters. DIMENSIONS: 12 x 16 inches. The casters are 2 inches in diameter. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

Carpeted Single Scooter Board (Model Bk8158)

The Carpeted Single Scooter Board, model 8158 is a single scooter board designed for use by children with lower extremity, mobility, or neurological disabilities. Constructed of solid plywood padded and covered with plush carpet, this single scooter facilitates optimal movement, providing excellent sensory stimulation. Other features include easy glide ball bearing casters securely welded and bolted through boards. DIMENSIONS: 12 x 16 inches. CAPACITY: 125 pounds. WEIGHT: 7 pounds.

Carriage Cart.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Transport a child in a hip spica cast; also useful as a feeding positioner. Baby carriage base adapted with padded wooden platform (48 by 16 1/2 inches by 1/2 inch). Platform attached to carriage base at both ends with pipe strap, screws, and lock washers. Fitted snugly between carriage handles; overhangs base by 4 1/2 inches at handle end, 3 1/2 inches at front end. Hip and chest straps made of 3 inch wide elasticized material with velcro closures to

Carrie Activity Base (Model Pc 4641C)

The Carrie Activity Base, model PC 4641C, is designed to elevate and add mobility to the Carrie Seat for peer interaction and activities. The base is designed for use with the Elementary and Pre-School Carrie Seats (see separate entry). Rear wheels allow for moving the seat around the immediate area.

Carrie Rover Stroller (Models 4642, 4643. 4644, & 4645)

The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be u

Carrier Wheelchair

---- PROTOTYPE --------- PURPOSE: To develop a prototype robotic wheelchair which allows individuals with mobility disabilities and wheelchair users greater independence and the capacity to traverse any terrain and situation. Developed as semester project at the University of Applied Arts in the Studio Industrial Design 2 Esslinger (www.creativednaaustria.com). The CARRIER wheelchair’s frame is specifically shaped to maneuver over a commode and adapted with a “trap door” allowing the user to us

Carriers For Crutches And Tripod

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adapted crutches and tripod carriers for an adult with spastic paraplegia and oral dyspraxia. The crutch holder accessory available from the wheelchair manufacturer was too small for the tripod and would be difficult to import from the United States. The custom adapted design began by taking an aluminum base panel and bolting it to the anti-tip legs on the back of the chair. To make the holders for the crutches and the tripod, pla

Carry All Pouch (Model 976)

The Carry All Pouch, Model 976 is a wheelchair and walker carry-all with four accessible pockets. The pouch is secured with Velcro fasteners over the front of the arm of a wheelchair or a walker bar. DIMENSIONS: 9.5 x 1.25 x 13 inches.

Carry All Pouch For Walker (Model 1116)

The Carry All Pouch for Walker, model 116, is a carrying bag made of blue denim designed to attach to the side of a wheelchair or walker. The pouch has one inside pocket and 3 outside pockets with velcro closures.

Carrying Aids For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with quadriplegia to keep essential items at hand while in his wheelchair. Three carrying aids were made and attached the left arm of the wheelchair. The first was a carrying pouch for a cell phone. Made of metal, the pouch is lined with vinyl to protect the phone from damage. The second was a small, flat metal tray to carry the remote control for operating the front door. Also added to the arm was a pocket made of vinyl to carry the hadset for

Carrying Aids For Wheelchairs

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with Friedrich's ataxia to carry staws and plastic bags with her. To ensure straws are available when needed, carry them in a round plastic toothbrush holder fastened with Velcro to the underside of one arm of the wheelchair. To ensure a supply of plastic bags are available for garbage, snacks, or clean-up bags, hooks dog clean-up bags in the dispenser they come in to the wheelchair. MATERIALS: Toothbrush holder, straws, dog clean-up bag

Casbar, The

The Casbar is a wheelchair push handle extension designed to enable a companion or caregiver to push a wheelchair using one hand. The ends of this C-shaped coated steel bar fit over the existing wheelchair push handles and lock in place using two large adjusting knobs to create a single stroller-style handle. On flat surfaces, this device enables the chair to be pushed and controlled with one hand and on inclines and ramps, using two hands makes pushing less difficult than when using the standar

Castor Cart

Vacuum formed ABS plastic base with 8-inch wheel on each side and a caster in the back. Back support is molded into base, with front extension for leg support in long-sitting position. Removable tubular steel push handle fits into receptacle at back of cart. Adjustable head support, pommel, chest belt and pad, seat and back cushions can be added. Child propels cart by pushing wheels. Low to floor for independent transfers. Seat belt attached to base. One size, for children 9 months to 4 years. B

Catalyst 4 And Catalyst 4 Super Low

The Catalyst 4 and Catalyst 4 Super Low are lightweight folding adult manual wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a varie

Catalyst 4C

The Catalyst 4C is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte or

Catalyst 4Ttl

The Catalyst 4TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It features an offset axle plate that offers rear seat height adjustability, and the axle plate can be reversed for amputees. A heavy duty frame (350 pounds capacity) and rear anti-tips are optional. The frame is available in a variety of colors in matte

Catalyst 5

The Catalyst 5 is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. Rear anti-tips are available for all versions. A variety of

Catalyst 5 Ti

The Catalyst 5 Ti is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of Ti3AL/2.5V alloy. It is available in two optional versions - Heavy Duty Option and Transit System. Aluminum cross braces are standard; titanium cross braces are standard. Rear anti-tips are available for all versions. A variety of colors are available. SEAT (WxD): 14 to 19 x 14 to

Catalyst 5Ttl

The Catalyst 5TTL is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. A depth adjustable rear frame also is optional that allows for adjustments of 2 inches forward and 3 inches forward. The frame can be ordered with the center of gravity set i

Catalyst 5Vx

The Catalyst 5Vx is a lightweight folding adult manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions - Heavy Duty Option and Transit System. The frame can be ordered with the center of gravity set in the rear, center or forward by axle position. Rear anti-tips are available for all versions. A variety of colors are

Catalyst Spark

The Catalyst Spark is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Elements of this wheelchair can be adjusted independently to accommodate the child's growth. FRAME (WxD): 10 to 16 x 12 to 18 inches, in 1-inch increments. The frame width is expandable up to 2 inches in 1-inch increments up to a maximum of 16 inches. Swing away front frame is standard; super low swing away frame is optional. Front fra

Catch-All (Model Wh190)

The Catch-All WH190 is a under seat net pocket designed for individuals who spend long periods in wheelchairs. Designed for use with rigid ad folding wheelchairs, this device securely attaches with Velcro hook and loop to the bottom horizontal and rear vertical frame tubing forming a catch all net shelf under the wheelchair seat. DIMENSIONS: The widths ranges are 10, 11 to 14, 13 to 18, and 17 to 24 inches. COLOR: Black.

Celebrity X 3 Wheel

The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features a

Celebrity X 4 Wheel

The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al

Celebrity Xl (Model Sc4450Dx)

The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control

Chailley Cart

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized mobility cart for children with mobility disabilities such as spina bifida and hydrocephalus. This child is paralyzed from the waist down, and the only way she could move independently was to drag herself on her stomach across the ground. The Chailley Cart is designed as a mobility device for young children who cannot walk but have good upper body strength. The cart is made primarily of plywood. It has a winged back support and

Chair 4 Life

---- PROTOTYPE --------- PURPOSE: To create a prototype of a modular wheelchair that "grows" with the user allowing for independence over the lifespan. Through the United Kingdom's National Health Service, the Renfrew Group developed a new type of powered wheelchair with the Department of Health, as part of the Department's Innovation Health and Wealth program. Renfrew won a government contract to design a chair which maximizes the mobility and independence of children with disabilities as they

Chairman Series Gel Power Batteries

The Chairman Series Gel Power Batteries are sealed, maintenance free wheelchair and motive power batteries. These batteries are available in 12-volt or 6-volt models that use absorbed electrolyte technology. Gas recombination eliminates corrosive, explosive gasses. The materials are non-spillable, even if the case is damaged. Due to these safety features, these batteries are not restricted for air travel. RECHARGE: These batteries are designed to give 700+ discharge/recharge cycles, and can be r

Chairmate Cup Holder/ashtray Holder (Model F70622-0000)

The Chairmate Cup/Ashtray Holder, model F70622-0000, is a wheelchair drink holder designed for use by individuals who use wheelchairs. The unit features a double-well cup holder and a removable ashtray. The deeper well has a pop-out bottom that accommodates most glasses and cups. The unit can be attached vertically or horizontally on the right or left side of any chair, metal frame-bed, or tubular frame wheelchair bar from 1/2 to 1.25 inches in diameter. DIMENSIONS (LxWxD): 7.75 x 6.25 x 1.75 in

Challenge Platform Wheelchair Rocker

The Challenge Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This device enables individuals to experience the benefits of rocking without transferring from a wheelchair and is designed for individuals with good upper-body strength and a sense of balance. The platform base has minimal arc, requiring users to exert more force to cause rocking movement.Features include entry/exit from the platfor

Challenger 2000 (Models 2000, 2000E, 2000N, 2000Ne, 2000W, & 2000We)

The Challenger 2000 is a powered folding wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2000 model, this wheelchair comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 38 x 44 to 47 x 24, 26 or 28 inches. With extended footrests, the length is 40 inches. The folded dimensions (LxW) are 34 x 14.5 inches. The folding chrome-plated frame includes rear anti-tippers. CONTROLS: Integrated progr

Challenger Bp 5000 (Models 5000, 5000E, 5000N, 5000Ne, 5000W, & 5000We)

The Challenger BP 5000 is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 5000, the Challenger BP comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 39 or 41 x 24, 26, or 28 inches. The frame length without footrests is 27 inches. The turning radius with footrests is 30 inches. The rigid polyester- coated power base frame is available in midnight blue and candy apply

Challenger Bx 6000 (Models 6000, 6000E, 6000X, & 6000Xe)

The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base

Challenger Dn (Models 1450, 1450E, 1450N, 1450Ne, 1450W, And 1450We)

The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with

Challenger Dx (Models 1500, 1500E, 1500N, 1500Ne, 1500W, And 1500We)

The Challenger DX is a powered foldable wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1500, the Challenger DX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 x 23, 25, or 27 inches. Folded (LxW) the chair is 30 x 15 inches. The turning radius with footrests is 32 inches. A folding chrome-plated frame is standard; also available is a black powder-coated frame with blue c

Challenger Fx (Models 1700, 1700E, 1700N, 1700Ne, 1700W, 1700We, 1710, & 1720)

The Challenger FX is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1700, the Challenger FX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 38 x 24, 26, or 28 inches. With extended footrests, the length is 40 inches. Folded dimensions (LxW) are 31 x 15 inches. The turning radius with footrests is 18 inches. The standard frame is a folding chrome-plat

Challenger Pediatric 1000

The Challenger Pediatric 1000 is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 x 41 or 44.5 x 21.5 inches. Folding chrome-plated frame with anti-tipper. Folded dimensions (LxW) are 31 x 14 inches. CONTROLS: Integrated programmable controller. RWD: Rear wheel drive with a right angle gear motor. SEAT (LxW): 14 or 18 x 14 inches. The back height is 14.75 inches. Seat belt included. UPH

Challenger Pediatric 1200

The Challenger Pediatric 1200 is a powered wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 36 x 36 or 37 x 21 inches. Folding powder-coated frame with anti-tipper, available in sunshine yellow or jade green. Folded dimensions (LxW) are 35 x 15 inches. CONTROLS: Integrated programmable Integra joystick controller. RWD: Rear wheel drive with a direct drive motor. SEAT (LxW): 14 or 18 x

Challenger Pp (Model 5500)

The Challenger PP, model 5500, is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 35 x 43 x 25 inches. The frame length without footrests is 31 inches. The turning radius with footrests is 19.5 inches. The one-piece polyester-coated power base frame is available in midnight blue and burgundy red; the seat frame is black. Front anti-tippers are included. CONTROLS: Integrated programmable Integ

Challenger Px (Model 6500)

The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight

Challenger Recliner 2040 (Models 2040E, 2040Ne, & 2040We)

The Challenger Recliner, model 2040, is a powered folding wheelchair with a manual reclining back designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2040E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 34 x 24, 26, or 28 inches. With extended footrests, the length is 47 inches. The folded dimensions (LxW) are 34 x 15 inches. The folding chrome-

Challenger Recliner 2540 (Models 2540E & 2540Xe)

The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f

Challenger Wide (Models 2500, 2500E, 2500X, 2500Xe, 2500Yw, 2500Ye)

The Challenger Wide, model 2500, is a folding heavy-duty powered wheelchair for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2500 model, this wheelchair comes with an extra-wide seat (X) and a super extra-wide seat(Y). FRAME (HxLxW): 38 x 46 x 30, 32, or 34 inches. With elevating legrests, the length is 49 inches. The folded dimensions (LxW) are 30 x 15 inches. The folding chrome-plated frame includes rear ant

Channel Armrest Fixture (Model 436F1)

The Channel Armrest Fixture, model 436F1, is a pivoting, elevating armrest designed to be attached to the arm of a wheelchair with a fitted clamp. The swivel configuration allows the armrest to turn on its horizontal and vertical axis for more comfortable positioning. It can also be used to mount and position hand control units for powered wheelchairs.

Chart Holder (Model 93)

The Chart Holder, Model 93 is vinyl pouch sewn to the back of the wheelchair upholstery. It may be used for carrying charts and papers. OPTIONS: Identification stencilling is available.

Cheetah Wheelchair

The Cheetah Wheelchair is a child's manual wheelchair designed for use by children with lower extremity disabilities, mobility disabilities, neurological disabilities, or spinal cord injury. FRAME: Composite frame with transportation tie-downs and anti-tips in a choice of silver, blue, red, or green. SEAT (LxW): Solid seat and back with built-in, step-less adjustment from 10 x 10 inches to 16 x 16 inches. The reclining backrest offers 22 degrees of manual tilt. CUSHION: Black and gray seat and b

Child Carrier

The Child Carrier is a child transport chair designed to enable a wheelchair user to carry a child on the wheelchair, to be close to the child, and keep the child occupied. The device consists of a standard child's swing seat mounted on a 3/4-inch copper plumbing pipe. A wire frame for a sun awning is mounted on the top of the frame. The unit mounts into the wheelchair arm rests. PROTOTYPE DEVELOPMENT: Designed by John Duffus for wheelchair users who have difficulty holding a child or moving abo

Child Wheelchair Tray (Model 766C)

The child wheelchair tray fits all wheelchair sizes. The top is made of mar-resistant wood grain laminate and has a 1/2 inch rim. DIMENSIONS: 21 x 18 x 12.5 inches with a 7.5-inch cut out.

Child's Vehicle

The Child's Vehicle is a powered cart designed to be an electric toy vehicle for children with poor dexterity and motor ability. The cart is a standard electric child's vehicle with a modified joystick control and a backrest. The joystick has a plastic plate mounted on top and four plastic discs mounted on each corner. The modified joystick allows the vehicle to be controlled with simple palm and forearm movement. This battery powered vehicle has two motors, six wheels, and is chain driven. PROT

Chump

The Chump is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Elements of this wheelchair can be adjusted independently to accommodate the child's growth. FRAME: Contoured saddle frame design to allow compact storage in a choice of standard or mini frame; the standard frame is 3 inches longer than the mini frame. The frame is available in choice of more than 20 solid colors or with anodized clouds or cust

Cirrus

Cirrus is a lightweight manual wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Carbon steel frame with double-coated chorome finish and dual axle allowing seat transition to hemi-level. SEAT: 16-, 18-, or 20-inch width. UPHOLSTERY: Flame-retardant black nylon upholstery. ARMRESTS: Flip-back arms with nylon padded armrests. Arms come in a choice of full or desk style. CASTERS: Urethane front casters with caster for

Cirrus Plus Folding Power Chair

The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 1

Clamp-On Cup Holder (Model 16C035)

The Clamp-On Cup Holder, model 16C035, is a wheelchair drink holder designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs. Once the attachment clip (included) is installed onto the chair, the cup holder itself can be removed as needed. There are no tools required. DIMENSIONS: Attachment clips fit 7/8 and 1 inch tubes.

Classic

The Classic is a 4-wheel scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 40 x 22 x 36 inches; folded 31 x 22 x 19 inches. The seat and tiller fold for transport or storage. The Classic has an underbody ground clearance of 3.65 inches and a turning radius of 29 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: Analog battery gauge and battery indicators lig

Classic

The Classic is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is spin forged from 6061-T-6 polished billet aluminum, with mirror bright surfaces, sealed bearings, and Double walled rims. Hand rim options include quad projections and an anodized or vinyl surface. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 3.9 to 4.4 pounds. COLOR: Polished aluminum, gold, red, blue, purple, or black. H

Clear Acryic Wheelchair Tray (Model H1202)

The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.

Clear Acrylic Wheelchair Tray (Model 5000)

The Clear Acrylic Wheelchair Tray, model 5000, is a lapboard designed for use with wheelchairs. The transparent acrylic is lightweight and the universal design fits all wheelchairs. The tray attaches with Velcro straps. DIMENSIONS: 23 x 19 x 1/4 inch.

Clear Acrylic Wheelchair Tray (Model 6662)

The Clear Acrylic Wheechair Tray, model 6662, is a lapboard designed for attachment to a wheelchair with Velcro straps. It is transparent, lightweight and has a universal design. DIMENSIONS (LxWxH): 23 x 19 x 1/4 inches. WEIGHT: 3 pounds.

Clear Non-Glare Acrylic Overlay (Models 11D.3A & 11D.3B)

The Clear Non-Glare Acrylic Overlays are designed for wheelchair trays by Consumer Care Products (model numbers starting with 11D, see separate entries). These overlays may be used for tracing activities and protecting communication aids and other accessories. The overlay snaps in and out. DIMENSIONS: Model 11D.3A is 16 x 20 inches; model 11D.3B is 19 x 24 inches. WEIGHT: Approximately 4 pounds.

Clip Stroller / Pushchair Size 1

The Clip Stroller / Pushchair 1 is a lightweight folding stroller designed for children with mild to moderated neurological and mobility disabilities. It is designed to provide head and trunk support. The size 1 Clip special needs stroller will support up to 66 lbs (30 kg). The Clip comes standard with a reclining backrest that is adjustable by zippers located behind the backrest. The backrest will adjust from 0 to 12 degrees from the upright position. A height adjustable footboard is also inclu

Clip-On Glass Holder (Model F74576)

The Clip-on Glass Holder, model F74576, is a drink holder designed to be attached to a wheelchair frame, commode, or other tubular frame haveing a diameter of 0.75 to 1 inch. This helical spring-wound wire holder has a baked-on enamel finish and a plated clip. DIMENSIONS: 2 7/8 inch inside diameter x 3 inches high.

Cloth Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Overcomes the difficulty of a person in a wheelchair to balance objects on the lap. Cloth tray with stiffened edges can be constructed to provide a flat surface on which to place articles. Stiffened edge serves to prevent things from slipping off the tray. Made of 1 and 1/8 yards of fabric or 1/2 yard each of two contrasting fabrics, velcro, and 1 and 1/8 yard rubber tubing or garden hose. COMMENTS: Simple pattern and instructions for construction are

Coccyx Gel Cushion

The Coccyx Gel Cushion is a foam wheelchair cushion designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to relieve pressure to the spine for wheelchair users, this cushion is made of a high density foam and gel combination for added strength and durability. It features a square shaped cutout for the coccyx to aid in proper weight distribution. DIMENSIONS (LxWxH: 18 x 16 x 3.5 inches. COLOR: Blue.

Collapsible Lap Tray.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair lapboard folds and stores on back of chair. Lightweight lapboard attaches to full length wheelchair arms. It folds in half and can be used as a short lapboard, or removes and stored easily on the back of the wheelchair. Includes picture. SKILLS REQUIRED: Woodworking AUTHOR: Bob Warren, UCP of Akron, 318 Water STreet, Akron, OH 330-376-6041. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Employment of Handicapp

Colson 0315 Seven Spoke Plastic Wheel

The 0315 Seven Spoke Plastic Wheel is a castor wheel designed for attendant operated wheelchairs. The caster wheel is made of high impact engineering thermoplastic to be virtually corrosion and oxidization free, and easy to clean. The rim section is designed to accept both pneumatic rubber and microcellular polyurethane (MCP) tires. The polyurethane tires have shallow tread patterns so that less debris is tracked indoors. WHEEL DIAMETER: 315mm (12.5 inches). TREAD WIDTH: 45mm (1.75 inches) or 57

Columbia Therapedic Explorer Mobility Base (Model 2100)

The Columbia TheraPedic Explorer Mobility Base, model 2100, is a stroller base for a detachable car seat designed for use by children with balance disabilities, neurological disabilities, and severe physical disabilities. This stroller base fits the Columbia TheraPedic Positioning Seat (see separate entry). The base folds for storage, and has a Tilt-In-Space feature that allows the seat to be tilted in any of five positions in the base. FRAME (HxLxW): 37 x 47 x 22.5 inches when open; 11 x 41 x 2

Combo Walker / Wheelchair Bag (Model 6434)

The Combo Walker/Wheelchair Bag is a carrying bag or caddy for use by people who use wakers or wheelchairs. The denim bag features four pockets ataches to the front walker bar or wheelchair arm using the attached straps. DIMENSIONS: 13 x 9.5 inches. COLOR: Blue.

Comet

Comet is a three-wheeled scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 250 x 130 millimeters. The scooter disassembles into four components for transport, and its front bumper serves as a carrying handle. This scooter is available in red or blue. CONTROLS: Dynamic Rhino 70 Amp speed control. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: The front tire is 200 millimeters in diameter x 50 millimeters wide and the two rear tires are 200 millimeters i

Comet Series 300

The Comet 300 Series are transport wheelchairs designed to transport individuals with mobility or cognitive disabilities who are unable to maneuver a wheelchair independently. FRAME: Steel folding frame in blue, red, or silver, depending on model. SEAT: The seat width is available in 17 inches (models 301, 317, 327), 17.5 inches (model 338), 18 inches (model 339), and 19 inches (models 309, 319, 329, 339). The seat depth is 16 inches. The distance from the seat to floor is 18 inches (model 330),

Comfort + Plus Clinical Recliner (Models 6902 & 6903)

Recliner chair with high back and full length armrests. Reclines to 3 positions. Legrest elevates as chair reclines. Four 5 inch casters. Self storing overlap table tray swings down to side. Upholstery is vinyl bonded to foam, flame and stain resistant seams. Push bar on back. Overall width 27 inches, overall depth 37 inches, overall height 45 1/2 inches, seat width 20 inches.

Comfort Pad For Economy Molded Lap Tray (Model A707-151)

The Comfort Pad for Economy Molded Lap Tray, model 707-151, is a lapboard overlay designed for use with the Economy Molded Lap Tray (see entry). This pad fits securely within the lip of the tray and is secured with the tray's D-ring straps. The pad has an integral cup/glass recess. OPTIONS: The pad and tray can be purchased separately or as a unit. DIMENSIONS: The pad is 0.5-inch thick.

Comfort Standing Power Wheelchair (Models Ly-Esb22Sr, Ly-Esb22Dr, Ly-Esb22Ar, & Ly-Esb22Lr)

The Comfort Standing Power Wheelchair, models LY-ESB22SR, LY-ESB22DR, LY-ESB22AR and LY-ESB22LR, is a powered stand up wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Available in four sizes (HxLxW): 35 x 46.5 x 24.5 inches (small, LY-ESB22SR); 35.75 x 46.5 x 26 inches ((medium, LY-ESB22DR); 37.5 x 47.5 x 27.5 inches (large, LY-ESB22AR); or 39 x 47.5 x 29 inches ( extra large, LY-ESB22LR). The unit has a rigid steel framework

Comfort Standing Wheelchair Plus Power Lift Chair (Models Ly-Esb12Sr, Ly-Esb12Dr, Ly-Esb12Ar, & Ly-Esb12Lr)

The Comfort Standing Wheelchair plus Power Lift Chair, models LY-ESB12SR, LY-ESB12DR, LY-ESB12AR, and LY-ESB12LR, is a manual wheelchair with an integrated powered standing aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This is a manual wheelchair with an electric powered lift mechanism that helps the user to stand up. It is available in four sizes for individuals 4 feet 8 inches to 6 feet 3 inches in height. The lift actuator is a 12/24

Comfortarm Armrest

The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swin

Comfortline Series

The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i

Compact Featherlight 757 (Model 757, 757E, 757N, 757Ne, 757W, & 757We)

The Compactor Featherlight 757 is a lightweight folding adult manual wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 757 model, this wheelchair comes in narrow (models 757N and 757NE) and wide (models 757W and 757WE) versions. FRAME (HxLxW): 34 to 37 x 43 or 45 x 23, 25, or 27 inches. The folded dimensions (LxW) are 31 x 11 inches. The dual axle position, multi-angle caster stem and adjustable heigh

Compact Pediatric 997

The Compact Pediatric 997 is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. FRAME (HxLxW): 31 to 34 x 35 or 36.5 x 20, 22, or 24 inches. Lightweight folding chrome-plated frame with composite side panel. Folded dimensions (LxW) are 26 x 11 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxW): 14 x 12, 14, or 16 inches. The back height is 14 to 16 inches. UPHOLSTER

Compact Super Hemi 797 (Model 797, 797E, 797C, 797Ce, 797N, 797Ne, 797W, & 797We)

The Compactor Super Hemi 797 is a lightweight folding manual wheelchair for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury as well as amputees. In addition to the standard adult 797 model, this wheelchair comes in children’s (models 797C and 797CE), narrow adult (models 797N and 797NE) and wide adult (models 797W and 797WE) versions. FRAME (HxLxW): 31 to 34 x 39 or 41 x 21, 23, 25, or 27 inches. The dual axle position, multi-angle ca

Compact Transporter 600 (Model 600, 600E, 600W, & 600We)

The Compactor Transporter 600 is a lightweight, attendant-driven transport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 28.5 x 37 or 39 x 20 or 22 inches. The chrome plated frame folds; the folded dimensions (LxW) are 23.5 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 17 or 19 x 19 inches. A folding 16.75-inch high back is standard. A seatbelt is optional. UPHOLSTER

Compact Transporter 700 (Model 700, 700E, 700W, & 700We)

The Compact Transporter 700 is a lightweight, attendant-driven transport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 28.5 x 37 or 39 x 20.75 inches. The chrome plated frame folds; the folded dimensions (LxW) are 23.5 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxWxH): 16 x 17 or 19 x 19 inches. A folding 16.75-inch high back is standard. A seatbelt is optional. UPHOLSTERY: Bl

Compact Ultralight 777 (Model 777, 777E, 777N, 777Ne, 777W, 777We)

The Compactor Ultralight 777 is a lightweight folding manual wheelchair for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 777 model, this wheelchair comes in narrow (models 777N and 777NE) and wide (models 777W and 777WE) versions. FRAME (HxLxW): 34 to 37 x 44 or 46 x 23, 25 or 27 inches. The folded dimensions (LxW) are 32 x 12 inches. The dual axle position, multi-angle caster stem and adjustable height front caster

Companion 3-Wheel Scooter (Model Gc-221)

The Companion 3-Wheel Scooter, model GC-221, is a compact scooter designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, and tail light. The floor board is partially carpeted. FRAME(LxW): 41 x 23 inches. The turning radius is 30 inches and ground clearance is 3.5 inches. The scooter disassembles for transport. Color choices are vermillion red, Arctic blue, or Sahara. CONTROLS: 70-amp programmable, electronic speed contr

Companion Ii 3-Wheel Scooter (Model Gc-321)

The Companion 3-Wheel Scooter, model GC-321, is a compact, 3-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, and tail light. FRAME(LxW): 45.5 x 23.63 inches. The turning radius is 33 inches. Ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. CONTR

Companion Ii 4-Wheel Scooter (Model Gc-421)

The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara.

Companion Shopper (Model 5500)

The Companion Shopper, model 5500, is a manual wheelchair designed for use by individuals with lower extremity, mobility, or physical disabilities or spinal cord injury. This chair features a swing-away shopping basket and is designed for use in commercial and retail environments. FRAME: Carbon steel, chrome-plated frame with rear anti-tips. UPHOLSTERY: Flame retardant upholstery that is mildew and bacteria resistant with heavy-duty inner liners to prevent stretching. WHEELS: Rear wheels with pe

Compass Spt Wheelchair

The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to

Compax (Models Cm16 & Cm18)

Compax is a lightweight travel wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. It folds and fits into the trunk of a car or on a plane, train, or bus. FRAME: The folding frame is 36.5 x 46 x 21 inches on model CM16 and 36.25 x 46 x 23.5 inches on model CM18. SEAT: 14 x 15.25 (model CM16) or 14.75 x 16.75 inches (model CM18). The back height is 15 inches on model CM16 or 16 inches on model CM18. A bucket seat and seat

Complete Feet

Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.

Complete Feet Single Foot

The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.

Composite Caster

The Composite Caster is a caster wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lightweight composite unit has a smooth finish that promotes easier turning, reduces rolling resistance, and has no tread to collect dirt . DIMENSIONS (Diameter x Width): 4 x 1.25 inches; 5 x 1 or 1.5 inches; 6 x 1 or 1.5 inches; 8 x 1 inches.

Concordia Wheelchair Tire, The

The Concordia Wheelchair Tire is a replacement tire designed for use by wheelchair users. This tire has non-marking and a center ridge for low rolling resistance. DIMENSIONS: 24 x 1.25 inches; this tire also fits 24 x 1 3/8 rims.

Continental Back Pack

The Continental Back Pack is a wheelchair back pouch designed to attach to the chair's handgrips with straps. An inner pocket has a top zipper closure, or a flap with a velcro closure. One large and two small outer pockets are included for access to smaller items. DIMENSIONS: 16 x 16 inches. COLOR: Black or saddle vinyl.

Converto Whirl-O-Wheel & School-Age Whirl-O-Wheel

The Converto Whirl-O-Wheel and School-Age Whirl-O-Wheel are hand-propelled, "chariot style" tricycles for recreational use by children age 3 and over. The device consists of a hammock seat of non-stretchable vinyl suspended on a steel tubular frame. The user sits between two cast aluminum wheels with non-marking, solid rubber tires. Each large wheel is powered directly by means of a horizontal handgrip fastened close to the outer circumference. The rear end of the carrier rides on a small third

Cozy Seat (Models 703005 & 703006)

The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.

Cpsc Standard Back (Models Sb-01 Thru Sb-06)

Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.

Cpsc Standard Pommel Seat (Models Sp-01 Thru Sp-06)

Wheelchair seat insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Has a 15 degree wedged seat, a thigh shelf and an integral abduction pommel to provide good positioning and weight distribution. Standard cushion is removable and vinyl covered. Options include polyfoam or viscofoam cushion, lateral padding, reinforced side panels. 7 sizes: 11 inches wide by 13 inches deep, 12 by 14 inches, 13 by 17 1/2 inches, 14 by 18 inches, 15 by 20 1/ 2 inches, 16 by 20

Cpsc Transfer Seat (Models Ts-02, Ts-04, & Ts-06)

Wheelchair insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Seat has 7 slope and a flat front profile. Unit clips directly over the wheelchair seat frame tubes, it seats the persons lower than normal for easier transfers, while still providing appropriate positioning.

Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)

Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.

Cross

The Cross is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is made from computer machined 6061-T-6 polished billet aluminum. The spokes resemble a maltese cross. It has mirror bright surfaces, sealed bearings, and a double walled rim. Hand rims are available with quad projections and with an anodized or vinyl-coated surface. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 5 to 5.2 pounds.

Cross-Sport

The Cross-Sport is a sport wheelchair designed for everyday use and use in occasional sporting events. FRAME: Lightweight, rigid titanium frame. WEIGHT: 15 pounds.

Cross-Sport C

The Cross-Sport C is a custom-designed sport wheelchair designed for everyday use and use in occasional sporting events. This chair enables the consumers to select the exact specifications and accessories desired for the chair. FRAME: Lightweight, rigid titanium frame with a fixed center of gravity. SEAT: Tapered seat. WEIGHT: 15 pounds.

Cruisaire (Models Ca11 & Ca13)

The Cruiseaire is a child's transport chair designed for use with children with mobility disabilities. FRAME (WxHxL): Both models have a lightweight folding frame with a grey hammertone finish. Open, odel CA11 is 20 x 37 x 31 inches without footrests and model CA13 is 21.5 x 37 x 33 inches without footrests. Folded, both models are 13 x 11 x 47 inches. An optional anatomic back frame is available on both models which stabilizes the head and neck to assist in the development of righting reflexes.

Cruiser (Models Cr11 & Cr13)

The Cruiser is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models are available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CR11 is 37.5 x 31.5 x 19.5 inches and model CR13 is 37 x 33 x 21 inches. Folded dimensions are 12 x 46.5 x 12.25 for model CR11 and 12 x 46.5 x 12 inches for model CR13. SEAT (LxW): 9 to 12 x 11 inches on model CR11 or 10 to 13 x 13 inches on mod

Cruiser Anatomic (Models Cx12, Cx14, Cx16, & Cx18)

Cruiser Anatomic is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This chair is available in standard and transit (bus/van tie-down) models. FRAME (HxLxW): Model CX12 is 36.5 x 44.5 x 21 inches, model CX14 is 36 x 36 x 23 inches, model CX16 is 37.5 x 39.5 x 26 inches, and model CX18 is 38 x 40 x 28 inches. Folded dimensions are 14 x 46 x 13 inches for model CX12, 14 x 46.5 x 14 inches for model CX14

Cruiser Ready

The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests

Crutch Bag For Scooter

The Crutch Bag for Scooter is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a scooter. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a scooter using a bungee tie (included) and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIM

Crutch Bag For Wheelchair

The Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has an outer pocket for additional items and a flap with a Velcro closure. DIMENSIONS (HxWxD): 20.5

Crutch Carrier

CUSTOM ADAPTATION PURPOSE: To provide a customized crutch carrier for a scooter used by person with post-polio syndrome. This device is created by cutting two 30 centimeter lengths of PVC tubing that are large enough in diameter to accommodate the lower part of the crutches while holding them firmly in position. Two tube clips are used to hold each piece of tubing in place, and are screwed through into the frame of the scooter seat back. TITLE: Carrying Crutches. JOURNAL: TAD Journal. REF: Volu

Ctm 3-Wheel Economy Scooter (Model Hs-320)

The CTM 3-Wheel Economy Scooter, model HS-320, is a 3-wheeleed scooter designed for use by individuals with mobility disabilities. Standard features include a front headlight, front basket, side reflectors, and rear view mirror. FRAME (HxLxW): 37 x 43 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 33.5 inches. Available in red, silver, or blue. CONTROLS: Large control panel with key switch and thumb levers. The tiller is adjustable. SEAT: 18-inch lightweight, padded, s

Ctm 3-Wheel Road Class Scooter (Model Hs-730)

The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke

Ctm 4-Wheel Deluxe Scooter (Model Hs-686)

The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit

Ctm 4-Wheel Economy Scooter (Model Hs-360)

The CTM 4-Wheel Economy Scooter, model HS-360, is a 4-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, side reflectors, and under-seat storage. FRAME (HxLxW): 36 x 46 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 52.3 inches. Color choices are blue, silver, or red. CONTROLS: Angle-adjustable tiller with full tiller shroud with charging port, key switch, and

Ctm 4-Wheel Mid Range Scooter (Model Hs-580)

The CTM 4-Wheel Mid Range Scooter, model HS-580, is a 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, side reflectors, rear view mirror, and under-seat storage. FRAME(HxLxW): 38 x 50 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 62.6 inches. Color choices are blue, silver, or red. CONTROLS: Console with charging port, key switch, and handle bars. The till

Ctm 4-Wheel Mini Scooter (Model Hs-250)

The CTM 4-Wheeled Mini Scooter, model HS-250, is a 4-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The leg room is expandable. The ground clearance is 1.6 inches and the turning radius is 44.3 inches. This scooter is available in red or yellow and has a front bumper. CONTROLS: Foldable tiller with large control panel with key switch and handlebars. SEAT: Foldable, padded 14-inch seat. ARMRESTS

Ctm 4-Wheel Mobility Scooter (Model Hs-890)

The CTM 4-Wheel Mobility Scooter, model HS-890, is a 4-wheeled heavy-duty scooter designed for individuals with mobility disabilities to use over rugged outdoor terrain. Standard features include full light kit with directional turn signals, front basket, front and rear bumpers, headlight, rear view mirror, and under-seat storage. FRAME(HxLxW): 49.6 x 60.0 x 26.0 inches. The ground clearance is 3.4 inches and the turning radius is 66.2 inches. This scooter has front and rear suspension. Color ch

Ctm 4-Wheel Road Class Scooter (Model Hs-740)

The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port

Ctm Mid Range Scooter (Model Hs-570)

The CTM Mid Range Scooter, model HS-570, is a three-wheel powered scooter designed for use by individuals with mobility or lower extremity disabilities. FRAME (HxLxW): 39 x 49 x 24 inches. The frame has 1.9 inch ground clearance and is available in red, blue, or silver. Features include reflectors, a mirror, and a storage area. CONTROLS: On/off key switch and speed control knob. RWD: Rear-wheel drive. SEAT: 18-inch wide swivel seat with headrest. ARMRESTS: Flip-up, width-adjustable armrests. BRA

Ctm Mini Scooter (Model Hs-235)

The CTM Mini Scooter, model HS-235, is a 3-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The ground clearance is 1.6 inches and the turning radius is 35.8 inches. This scooter disassembles into two parts for travel or storage, offers expandable leg room, and has a front bumper. This scooter is available in red or yellow. CONTROLS: Large control panel with key switch on the adjustable folding t

Cuddlebug

The CuddleBug is a stroller designed for use with children with mobility, neurological, or severe physical disabilities. This stroller offers tilt, full recline, and hi/lo capabilities and accepts two seating modules to accommodate growth. The unit folds for transportation and storage without removing the seating module. The unit offers 5 to 30 degrees of adjustable tilt and 90 to 160 degrees of adjustable recline. Standard features include a height-adjustable push handle; a padded seat insert w

Cup Holder

The Cup Holder is a wheelchair cup, glass, mug, or can holder designed to allow individuals who do not have the use of their hands to drink through a straw from his/her own cup without assistance. The plastic adjustable cup cradle is fixed to the top of a 10 mm stainless steel rod. The rod is mounted onto the wheelchair arm with a plastic connector. The cradle has two openings on either side for a mug handle and will accommodate a wide variety of drinking containers, allowing the user to use a p

Cup Holder

DO IT YOURSELF PURPOSE: To provide powered wheelchair users with the ability to carry beverages. A cup holder designed to clamp to an automotive air vent can be adapted for use on a wheelchair. Zip ties can be used to secure the holder squarely to the frame where it works best for the user. TITLE: Cup Holder. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.

Cup Holder 1

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to drink independently. This cup holder is made using a flexible gooseneck microphone stand with fittings at each end, a machined clamp that fits the wheelchair armrest, a piece of black PVC drain collar, and fence wire. The PVC collar has a notch cut into the side of it to hold a thermal coffee cup, and a wire cage was added below to hold most juice bottles and soda cans. A piece of fencing wire is placed inside the go

Cursum Stroller

---- PROTOTYPE --------- PURPOSE: To design a prototype of a stroller adapted for a wheelchair to be used by individuals with lower extremity and mobility disabilities, spinal cord injury, and others who use wheelchairs. The Cursum stroller, a wheelchair adaptive stroller, is designed to be used in tandem with a wheelchair. It connects to the front of a wheelchair. Swivel wheels, complete height adjustment, attention to comfort and visibility, and advanced safety features give parents with disab

Curtis Pmc Speed Controller (Model 1203A)

The Curtis PMC Speed Controller, model 1203A, is an electronic acceleration and speed limiter designed for heavy duty permanent magnet motor applications for wheelchair users. It offers infinite y adjustable drive and brake control; automatic dual ramp reversing; adjustable reversing speeds; regenerative braking; a high frequency (silent) operation with low end torque, and thermal protection in case of overheating. This speed controller is compatible with most motor units, and the main power con

Curtis Wheelchair Battery Fuel Gauge (Model 900W)

Battery gauge monitors charge for any lead acid deep cycle 12 or 24 volt wheelchair battery. LED bar displays battery charge level. Attaches to arm of chair in view of user with a hook loop fastening system. Alarm flashes once when battery is low and needs recharging, double flashing light indicates battery is near dead. When on empty, wheelchair can still travel short distance. Unit resets to full when charge is 80 percent complete and charge takes another 2 or 3 hours to complete. Display ligh

Curved Transfer Board

The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle

Cushion Stop (Model 5035)

The Cushion Stop, model 5035, is a cushion retainer designed to prevent a cushion from sticking out the back of a wheelchair. The heavy cotton duck fabric insert attaches permanently to the seat and back of the wheelchair to prevent the cushion from sliding out. Grommets in the webbing straps attach to the upholstery screws on the back and seat. SIZE: For standard adult or narrow adult wheelchair.

Cushion-It: Medical Sheepskin Wheelchair Pad

The Cushion-it: Medical Sheepskin Wheelchair Pad is a wheelchair seat cover designed for use by individuals at risk for pressure sores/ulcers. Machine washable and urine resistant, this Australian Medical Sheepskin pad can also beused as a back pad and reduces pressure and absorbs perspiration. The HiTemp UR Australian Medical Sheepskin Pads are held securely in place by straps with Velcro adjustment and closure. The leather of these sheepskins is perforated by an array of small holes to facilit

Custom Basketball Wheelchair

The Custom Basketball Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Each wheelchair is custom built to individual specifications for size, rake and camber. FRAME: Aluminum (standard) or titanium (optional); fixed camber bars from 10 to 20 degrees; rear anti-tips; powder coat finish. SEAT: Adjustable back height (standard). Options include adjustable tension seat back; alloy seat base; waist strap; back bar c

Custom Footplates

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted footplates for an electric wheelchair used by an individual with reduced mobility and strength. When this individual sits in her chair with the footplates at a comfortable height for her, they rubbed on the wheels, particularly when she was turning. Additionally, this individual did not have enough strength in her feet to push the footplates up out of the way when she wanted to get out of the chair. Sometimes a care giver co

Custom Lawn Bowl Wheelchair

The Custom Lawn Bowl Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Built to comply with lawn bowls regulations for using wheelchairs on the green, this wheelchair is custom built to the user's specifications for size, rake and camber. The low ride height puts the user closer to the green, and the wide castor positions allow the user's feet to clear the castor wheels. Wheel/frame offsets can be built in to he

Custom Motorized Trikes

Custom Motorized Trikes are powered adult tricycles designed for use by individuals with mobility or lower extremity disabilities. Motorcycles and sidecars are custom converted to motorized tricycles with hand controls that eliminate shifting with the left foot. Honda and Harley Davidson models can be converted using Motor Trike conversion kits. OPTIONS: Kliktronic electronic shifter; Champion reverse gears; Champion EZ-Steer; trailer hitch dock.

Custom Tennis Wheelchair

The Custom Tennis Wheelchair is a sports wheelchair intended for individuals with lower extremity or mobility disabilities or spinal cord injury. The strong lightweight frame is configured to allow adjustment of the seat for comfort while playing tennis. FRAME: Each frame is built to individual specifications for size, rake and camber. Oval aero tubing is used extensively throughout the frame for increased lateral strength. Rolled oval tubing under the seat sling allows the use of an adjustable

Customized Electronic Stroller

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized electronic wheelchair (herein referred to as stroller) for a 10-year-old boy who has spinal muscular atrophy. Due to the nature of his condition, the child prefers to remain horizontally positioned, and the stroller design accommodated that. The electronic stroller can be manually pushed or controlled electronically. The user interface for the electronic controls includes a single touch button that the user can press whenever t

Cycl-One 3, 12, 48

The Cycl-One is a cycle attachment for manual wheelchairs designed to transform the chair into a hand-propelled cycle. The attachment consists of a front wheel, handcrank shaft, and attachments for mounting onto the wheelchair frame. FRAME: The frame is made of high tensile steel tubing and the crankset is alloy with a 28-tooth chainring (3 and 12 speed models) and 34 tooth chainring on the 48-speed model. HANDLES: The "together"-style hand pedals with parallel horizontal handgrips are designed

Cyclone Advantage 4

The Cyclone Advantage 4 is an adult manual wheelchair designed for use by individuals with lower extremity or mobility disabilities and spinal cord injury. The chair is adjustable for use in everyday life or as a sport wheelchair, with a low and maneuverable configuration for tennis or a high and stable configuration for basketball. FRAME: Hand-built adjustable frame. SEAT: The seat height can be raised and lowered without changing the backrest angle.

Cyclone Enigma

The Cyclone Enigma is a lightweight sport wheelchair designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury. The chair is available in rugby or basketball configurations. FRAME: Manufactured from aluminium alloy or titanium aerospace alloy tubing.

Cyclone Mtm 7020

The Cyclone MTM (Made To Measure) 720 is a lightweight manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Handbuilt frame made from 7020 aluminium alloy, with adjustable camber bar and choice of frame color. Optional one arm drive. CUSHION: Choice of cushion thickness. UPHOLSTERY: Fabric or leather upholstery; leather upholstery is available in black or red. BRAKES: Choice of brakes. CASTERS: Choice of caster size and sty

Cyclone Pro-Competition (Models Pc Ht & Pc Ti 325)

The Cyclone Pro-Competition is a sport wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Available in high tensile aluminium alloy (model P CHT) or titanium aerospace alloy (model PC Ti 325). SEAT: Tapered seat for leg stability. The chair is available with a high frame for basketball or low seating for rugby and tennis. CASTERS: Wide caster positions to prevent picking.

Cylinder Rack (Model De-1-W)

The cylinder rack is a cylinder cart for wheelchair that fits on back of wheelchair attached with small wrench Nylon screw on holding ring secures cylinder in place. It holds D or E cylinders and has bright chrome plating. Does not interfere with operation of chair. (IV Pole not included).

D.I.Y. Adaptive Tricycle

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Helps children with movement disabilities ride a tricycle safely with guidance. A store-bought tricycle is adapted with the addition of foot holders, a seat back, seat belt and a PVC pipe push bar. COMMENTS: The DIY Adaptive Tricycle is designed for children with mobility issues, low muscle tone, or other disabilities that prevent them from riding independently. SKILLS REQUIRED: Basic construction (fine motor skills). AUTHOR: Unspecified. TITLE: Adapti

Daessy Desktop Mount (Model Ddm-1)

The Daessy Desktop Mount, model DDM-1, is a mounting clamp designed to hold a communication device for individuals who have physical disabilities and use a communication device. The desktop mount provides a stable, hands-free support for any flat surface. It is ideal for individuals who have limited upper limb mobility. The stand comes with the Quick Release Mount, which holds the device firmly yet allows you to remove it with just a flip of a lever.

Daessy Folding Mount

The Daessy Folding Mount is a wheelchair mounting system for communication devices. The unit provides a solid, stable platform that can be adjusted to meet the positioning needs of each individual. The communication device and platform can be rotated down and out of the way beside the wheelchair to permit close-in positioning to a desk or table. Models are available for 7/8-inch tubing, .75-inch tubing, and 1-inch tubing, all in a choice of 6- and 12-inch offset.

Daessy Mini Adjustable Mount (Model M75-Am)

The DAESSY Mini Adjustable Mount, model M75-AM, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system has several points of adjustment to set up and position the mount. Two rotating joints can be angled and twisted in various directions to adjust the horizontal tube position. The system is supported on the wheelchair by a

Daessy Mini Bent-Tube Mount (Model M75-Btm)

The DAESSY Mini Bent-Tube Mount, model M75-BTM, is a stand for a tablet computer, switch mounting hardware and a computer and communicator mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The mount is non-directional and can be installed on either side of the wheelchair. This product also can be removed from the wheelchair when not needed. The frame clamp assembly includes a

Dalton 3 Wheel Scooter (Model Sc-S135)

The Dalton 3 Wheel Scooter, model SC-S135, is a scooter designed for use by individuals with mobility disabilities. FRAME: Red or blue ABS plastic body with a chrome steel bumper that also functions as lift handle. CONTROLS: Dynamic DL Rhino controller and adjustable-height tiller. RWD: Rear wheel drive with high torque drive train. SEAT: Padded seat with headrest. ARMRESTS: Flip-up armrests with height, width, and angle adjustments. BRAKES: Intelligent regenerative electromagnetic brakes. WHEEL

Dane Wheelchair Mover

The WheelChair Mover uses a simple hand lever design that activates secure hitching to the frame of the wheelchair. The ergonomic design of the machine allows the user to control the speed with easy and controlled throttle acceleration. With the unit securing the frame at a low center of gravity, turning the wheelchair in a circle is smooth and effortless. Compact and quiet, the Dane WheelChair Mover is the ideal device to fit within hospital rooms and halls while meeting the objectives of safe

Davis Suspension Forks

Shock absorbing suspension caster fork for wheelchairs. For semipneumatic and pneumatic caster tires. Fits most wheelchairs. Fork sandwiched with additional plate, fastened by bolt with spring to absorb vibrations.

Day Cruiser Mini Pack

The Day Cruiser Mini Pack is a wheelchair side or legrest pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water-resistant heavy-duty Cordura with a full lining, this pack attaches to the armrest or legrest of a wheelchair with two Velcro straps, which are sewn on the back of the unit. It can also be worn around the user's neck. The pack has two compartments, an adjustable neck strap, and a sewn-on elastic loop on the side to carry glasses or a pe

Day Cruiser Wheelchair Bag

The Day Cruiser Wheelchair Bag is a wheelchair back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from water resistant heavy-duty Cordura with a full lining, this backpack attaches to most wheelchairs with or without push handles with two adjustable straps. The backpack has two compartments, a large main area with Velcro flap closure and an expandable zippered front pocket for smaller items. Power chair users must have handles to attach the bag. DIM

Daytona 3 (Models S35005 & S35006)

The Daytona 3 is a three-wheeled powered scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 44.4 x 22.5 inches. This scooter disassembles into three pieces for transport. The frame is available in red (model S35005) or blue (model S35006)and includes anti- tippers and a headlight. The scooter has a 40.2- degree turning radius, a climbing angle of 8 degrees, and ground clearance of 2.5 inches. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured he

Daytona 3 Gt (Models S35005Gt & S35006Gt)

The Daytona 3 GT, models S35005GT and S35006GT, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 47.4 x 22.8 x 40 inches. The ground clearance is 2.5 inches, and the turning radius is 40.2 inches. The unit includes rear anti-tip wheels, a headlight, a tail light, a front large carry basket, and a front bumper. The scooter can be disa

Daytona 4 (Models S45001 & S45002)

The Daytona 4 is a four-wheeleed scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 49 x 22.5 inches. The frame is available in red (model S45001) or blue (model S45002). This scooter is equipped with anti-tippers, headlights, and a large carrying basket. The scooter has a 64-inch turning radius, an 8-inch safe climbing angle, and 3-inch ground clearance, and it disassembles for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured swiv

Daytona 4 Gt (Models S4501Gt & S4502Gt)

The Daytona 4 GT, models S45001GT and S45002GT, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 49.6 x 22.8 x 44 inches. The ground clearance is 3 inches, and the turning radius is 64 inches. This scooter includes rear anti-tip wheels, two headlights, a tail light, a front large carry basket, and a front bumper. It has anti-tippers.

Debug Beach Wheelchair

The DeBug Beach Wheelchair is an attendant-propelled beach wheelchair designed for use by individuals with mobility disabilities. FRAME: High-grade 316L stainless steel tubing. An articulating rear suspension system and push handles are included. The chair comes standard with a high-gloss, stainless steel finish. Custom powder-coat colors are available. Optional quick-release pins for disassembling the chair without tools are available. The chair is 33.5 inches wide with the standard wheels and

Deep U Headrest (Model Duhr100)

The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches.

Deluxe Down-Under (Model Wh175) & Junior Down-Under (Model Wh175J)

The Deluxe Down-Under WH175 and the Junior Down-Under WH175J are removable under seat pockets designed for use by wheelchairs users. The bags have one main compartment and an additional outside pocket suitable for carrying a checkbook, wallet, small book, wheelchair tools etc. The pockets have zip closures with large pull rings. The Junior Down- Under is sized for small chairs. DIMENSIONS (WxHxD): Deluxe Down-Under - 11x7x3 inches; Junior Down-Under is 9x7x3 inches. COLOR: All black or black wit

Deluxe Fly-Weight Aluminum Transport Chair (Fw17 & Fw19 Series)

The Deluxe Fly-Weight Aluminum Transport Chair, FW17 and FW19 series, is a folding transport wheelchair designed for use by individuals with lower extremity, mobility, or walking disabilities. FRAME (LxWxH): 33 x 20 x 36 inches (FW17 series) or 33 x 22 x 37.25 inches (FW19 series). The folded width is 9 inches for both series. Aluminum frame is available in blue, green, black, or silver. SEAT (WxD): 17 x 16 inches (FW17) or 19 x 16 (FW19). Back height is 18 inches; and the seat-to-floor height i

Deluxe Lateral Arm Support (Model 6320)

The Deluxe Lateral Arm Support, model 6320, is a trunk support designed for use by wheelchair users who lean laterally. This padded trough has an ambidextrous design, enabling it to fit either wheelchair armrest. The contoured trough supports the arm and encourages arm use and rehabilitation. Optional self-releasing straps may be used to stabilize arm position. This support has a soft, water-repellent, wipe-clean vinyl cover.

Deluxe Reversible Extenda Arm (Model 31094)

The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to

Deluxe Transfer Board (Models Nc94205 & Nc94205-B)

The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942

Deluxe Wheelchair Tray (Models H1200 & H1201)

The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.

Deluxe Wood Transfer Board

The Deluxe Wood Transfer Board is designed for use in transfers to and from wheelchairs. This solid hardwood board has tapered ends and is urethane coated, sealed, and polished for smoothness. The board has a cut-out handle for gripping and carrying. DIMENSIONS (LxW): 30 x 8 inches. CAPACITY: 250 pounds.

Depends Holder Bag (Model St107)

The Depends Holder Bag, model ST107, is a carrying bag designed for attaching to a wheelchair for individuals who use a wheelchair. This bag provides easy on/off handling and is made from light weight canvas. OPTIONS: Silk screening with your logo or message in a variety of colors is available upon request. DIMENSIONS: 16 x 24 with a 5.5 inch gusseted bottom. COLORS: Body color comes in natural. Assorted webbing and trim colors are available.

Desk Arm / Large Lap Hugger (Models 6515L, & 6517)

The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.

Desk-Length Armrest (Model Ar20) And Full-Length Armrest (Ar24)

The Desk-Length Armrest (model AR20) and Full-Length Armrest (AR24) are single post armrests that come with mounting hardware and are designed for use on seating systems. They can be attached to aluminum pans to be non-removeable, removeable with fixed height, or height- adjustable with fixed lower limit. Desk-Length Armrests are 9 inches long and Full-Length are 14 inches long.

Detachable Laptray With Electronic Talking Communicator.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Laptray to securely hold electronic communication device on wheelchair lapboard. A hinged vacuum formed plastic housing was designed to clamp to the desk arms of a wheelchair. By lifting the laptray the individual has immediate access to the communicator, yet it is concealed when it is not in use. The top of the laptray provides a working surface for the individual. Includes photographs. SKILLS REQUIRED: Plastics, woodworking. AUTHOR: David Law, Jr., W

Developmental Scooter (Model 1470)

The Developmental Scooter, model 1470, is a hand propelled scooter that allows a child with mobility or neurological disabilities to move in a prone position. Constructed of 3/4 inch plywood with padding. The padding gradually increases to 9 inches thick under chest area, elevating head and shoulders. Covered in washable vinyl coated nylon. Rolls on four 2 inch diameter casters. Front casters swivel 360 degrees. Includes safety straps and rope for pulling. DIMENSIONS (LxW): 43 x 16 inches.

Device To Attach Pram (Child's Stroller) To Wheelchair

CUSTOM ADAPTATION PURPOSE: To design and build a removable device which would lock a pram (child's stroller) into position at the front of a wheelchair for a person with paraplegia. Several ideas were considered but the final solution involved lifting the back wheels of the pram off the ground and putting the weight on the front pram castors and the front wheelchair castors. Lightweight 16-millimeter square steel tubing was used to build a frame which clamps in place on both wheelchair and pram

Diestco Armrest Front Bag

The Diestco Armrest Front Bag is a caddy for a scooter or powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This large basketball-shaped and sized bag mounts to the end of armrests with the included straps and is detachable when not in use. Made of water-resistant nylon, this bag has a lightweight aluminum frame to retain the shape and a zippered top cover. DIMENSIONS: 7 inches high x 12 inches in diameter.

Diestco Armrest Pocket

The Diestco Armrest Pocket is a wheelchair side pocket designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made of waterproof nylon, the pocket attaches to the wheelchair armrest with the included straps. DIMENSIONS: 11 x 5 x 3 inches.

Diestco Basket Liner

The Diestco Basket Liner is a liner for scooter baskets designed for use by individuals with mobility or lower extremity disabilities. Made of water-resistant nylon, this liner has a zippered top. DIMENSIONS(WxLxD): 13 x 10 x 7 inches.

Diestco Cargo Shelf

The Diestco Cargo shelf is an under seat pocket designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mesh shelf attaches to the frame of manual wheelchairs underneath the seat with the included hook-and-loop straps. DIMENSIONS(WxD): 15 x 16 inches.

Diestco Deluxe Armrest Saddle Bag (Model B2121)

The Diestco Deluxe Armrest Saddle Bag, model B2121, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment, side pockets, a zippered interior pocket, and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inch

Diestco Deluxe Scooter Tiller Bag

The Diestco Deluxe Scooter Tiller Bag is a scooter fron pouch designed for use by individuals with lower extremity or mobility disabilities. Made of watter-resistant nylon, this bag has a front zippered pocket, a front mesh pocket, a side pocket, and an inside pocket. It attaches to the handlebars and can be mounted in front or behind the tiller. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Deluxe Seatback Bag

The Diestco Deluxe Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, side pockets, and

Diestco Down-In-Front Wheelchair Bag

The Diestco Down-in-Front Wheelchair bag is an under seat pocket desighed for use on manual wheelchairs without armrests. Made of water-resistant nylpn, this single-pocket bag attaches to the lower front frame of the wheelchair behind the user's legs with buckle-closure straps. DIMENSIONS(WxLxD): 11 x 6 x 3 inches.

Diestco Extra Large Armrest Saddle Bag (Model 2131)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a front zippered pocket, mesh pockets in front and on the sides, an inside pocket, side loops, and a secret pocket. DIMENSIONS(WxLxD): 12 x 16 x 2 inches.

Diestco Fabric Cane And Crutch Holders (Models B6213 & B6313)

The Diestco Fabric Cane and Crutch Holders are cane or crutch holders for wheelchairs or scooters side pouch designed for use by individuals with mobility, walking, or lower extremity disabilities. Made of water-resistant nylon, this carrier is shaped similarly to a golf bag and is available with a mounting system for use on captain-style scooter seats or wheelchairs without push handles (model B6213) or on wheelchairs with push handles (model 6313).

Diestco Large Armrest Saddle Bag (Model B2125)

The Diestco Extra Large Armrest Saddle Bag, model B2131, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch mounts on a scooter or powered wheelchair armrest and has a variety of pockets and compartments. DIMENSIONS(WxLxD): 9 x 12 x 3 inches.

Diestco Mid-Range Seatback Bag (Model B1117)

The Diestco Deluxe Seatback Wheelchair Bag, model B1117, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has several pockets, including a back mesh pocket, a zippered back pocket, and

Diestco Monster Seatback Bag (Model B1113)

The Diestco Monster Seatback Bag, model B1113, is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag can be used with captain-style scooter seats or with wheelchairs with push handles. The bag has a lightweight aluminum frame to keep it open. DIMENSIONS(WxLxD): 13 x 18 x 10 inches.

Diestco Standard Armrest Saddle Bag (Model B2111)

The Diestco Standard Armrest Saddle Bag, model B2111, is a wheelchair or scooter side pouch designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. Made of water-resistant nylon, this pouch can be mounted on the inside or outside of an armrest on a scooter or wheelchair. This pouch has one flap-covered main compartment and two small outside pockets for a cell phone or glasses. DIMENSIONS(WxLxD): 10 x 8 x 3 inches.

Diestco Standard Seatback Wheelchair Bag

The Diestco Standard Seatback Wheelchair Bag is a wheelchair or scooter back pouch designed for use by individuals with lower extremity, severe physical, or mobility disabilities or spinal cord injury. Made of water-resistant nylon, this pouch attaches to the seat back with the included harness-style mount. The bag has a zippered top. DIMENSIONS: 12 x 12 x 3 inches.

Diestco Universal Cup Holder

The Dietsco Universal Cup Holder is a wheelchair drink holder designed for use by individuals with mobility disabilities or spinal cord injury. This holder attaches to the wheelchair or scooter armrest with the included mounting hardware.

Dino Wheel

The Dino Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel has a hub milled from a solid piece of billet aluminum, with 12 tubular aluminum spokes, and double wall deep V aluminum rims. The wheel is lightweight and responsive to the user's push, and it has the strength for everyday use. The low spoke count allows access through the wheel. The wheel has standard 6-tab handring mounting holes. The maxim

Direct Mount Clamp (Model 247-Dm100)

The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha

Disposable Wheelchair Cover (Model Mc-5)

The Disposable Wheelchair Cover, model MC-5, is designed to protect manual and power wheelchairs, commodes, oxygen tanks, etc. DIMENSIONS: 28 x 22 x 35 inches. COLOR: Clear plastic.

Diy Snow Tires

--- DO IT YOURSELF ENTRY --------- PURPOSE: To create do-it-yourself snow tires for manual or powered wheelchair for individuals with mobility disabilities. Acquire sturdy/plastic wire ties that are long enough to go around the thickness of the wheelchair’s tire and wheel (approximately 6.5 to 8 inches and 50 pound strength or more). Depending on the size of the wheelchair’s wheel and tire, tie approximately 25 to 30 ties evenly around each wheel and tire of a manual wheelchair. Power wheelchai

Dominik

The Dominik is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Three different frame lengths are available. The brightly-colored frame is includes push handles and a support roll. It folds compactly for transport and storage. Seat tubes are integrated into the side frame. SEAT: A variety of seat widths and lengths are available in connection with the different frame lengths. The back includes adju

Double Tube Lift-Off Mounting Kit (Models 3613 & 3613-01)

The Double Tube Lift-off Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Lift-Off Mounting Plate, two 90-degree Vertical Tubes, and four 2 Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Double Tube Mounting Kit (Models 3603, 3603-01)

The Double Tube Mounting Kit is designed to attach the headrest, the occipital ring, and their Interface hardware to the back of a wheelchair. The Kit consists of a Double Tube Mounting Plate, two 90-degree Vertical Tubes, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Down-Under Shelf (Model Wh185)

The Down-Under Shelf, model WH185, is an under seat carrying caddy designed for use by individuals who spend long periods of time in wheelchairs. Designed for rigid wheelchairs, this caddy attaches under the chair with Velcro straps and provides ample space for school books, shopping items, clothing, etc. DIMENSIONS (HxWxD): 4 x 14 x 11 inches. COLOR: Black.

Drag Bag

Drag Bag is designed to protecting your disabled dog’s chest and limbs. It prevents abrasions and sores that can be caused by scraping against carpets, floors and rough surfaces. Great for using at home when your disabled dog is not in its wheelchair. Made of nylon with mesh panel for ventilation. Machine washable.

Dragon

The DragonFly is a powered elevating wheelchair designed for indoor or outdoor use by individuals with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick with a separate controller for the elevator. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of th

Drink Holder

The Drink Holder is a wheelchair drink holder designed for use by individuals with lower extremity, mobility or walking disabilities or spinal cord injury. The unit consists of a stainless steel frame with a clamping system for attaching to a chair, crutches or walker. The clamp has a rubber grommet to prevent scratching, along with an adjustable Velcro tightening strap. The holder can be carried in the user's wheelchair bag until it is needed. An insulated beverage jacket is included. It can al

Drink Holder

CUSTOM ADAPTATION PURPOSE: To provide a means for an individual with severe phyical disabilities to carry beverages. A chrome-plated curtain rod was used to make a vertical tube system that fits into brackets installed on a wheelchair. A horizontal crossbar supports a plastic container which, in turn, holds a cup or glass that the user can access with a straw. TITLE: Easels, Calling Systems and More. JOURNAL: TAD Journal. REF: Volume 24, Number 4, Summer 2004: P. 16-17. PAGES: 3 (including cove

Drinkup Travel Lite

The Drinkup Travel Light is a wheelchair drink holder with a long straw designed for people who have lower extremity or mobility disabilities and spinal cord injury and grasping, fine motor, upper extremity, severe physical disabilities or upper extremity amputation. The Drinkup Travel light consists of a water bottle cage with a bracket so it can be attached to the backrest frame of a wheelchair. It has a semi-rigid flexible arm that extends upward past top of backrest and forward around to the

Drive On Stand

The Drive on Stand is designed for use by individuals who use a wheelchair for mobility as a result of limited lower extremity mobility. It works with all Be Adaptive models of equipment that fit into our seat pan. Users can drive their chair up to the equipment without having to put the seat pan under their cushion. It can be used by multiple users.

Drop Base

The Drop Base is a ABS plastic solid seat panel with cutouts for wheelchair cross braces designed to allow the mounting of custom or commercial seat cushions level with or below seat rail level. The panel fits between the seat rails, with 1- and 2-inch drop hooks to fit 7/8-inch or 1-inch rails. DIMENSIONS: Sized to fit 16 and 18 inch widths.

Drop Seat And Cushions (Models 6540, 654020, 6541, & 6519)

The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the

Drop Seat Base And Hardware

The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.

Drop Seats (Models 31649, 31651, 31655, & 31656)

Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1

Drop-Stop Footrest Extender /legrest Pad(Series 7032)

Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.

Dual Purpose Oxygen Cylinder Holder (Model Cs1200)

The Dual Purpose Oxygen Cylinder Holder, model CS1200, is an oxygen cylinder carrying case designed for use by individuals with respiratory disabilities who use either a wheelchair or a walker. This dual purpose unit allows the user or a caregiver to move oxygen cylinders from a wheelchair to a two-wheeled walker and back. The unit attaches to most two-wheeled walkers and most wheelchairs, including bariatric wheelchairs. The unit is made of polyester with Velcro straps for attaching to the whee

Dual Tilt In Space With Shear-Controlling Power Recline Systems

Dual Tilt in SpaceShear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt and 57 degrees of tilt or any combination in between. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard featu

Duet Transport Chair And Rollator

The Duet is a combination transport wheelchair and rollator designed for use by individuals with lower extremity, walking, or mobility disabilities. This product functions as a four-wheeled rollator and as a transport wheelchair. The Duet folds for storage or transport, and it converts from a rollator to a wheelchair by flipping up a backrest. It is equipped with a front footrest bar, loop hand brakes, and under-seat storage. DIMENSIONS(WxLxH): 25.5 x 26 x 37 inches open; and 25.5 x 14 x 37 inch

Duet, The

The Duet is a wheelchair tandem cycle designed to provide recreational transportation for two: a wheelchair user or rider with partial or severe physical disabilities, cognitive or visual disabilities, or a pediatric or geriatric passenger, and a non-disabled cyclist. The engineering of the cycle allows passengers from 20 to 275 pounds to fit comfortably by simple adjustments or by using a combination of matching upholstery accessories, seat cushions, and supports. Larger passengers are as easy

Durachair 1000

Durachair 1000 is a geriatric chair with wheels. The chair has a furniture-grade PVC tubular frame that provides support without sharp edges; a multi-position backrest and multi-position legrest that operate independently; non-absorbent waterproof fabric covers; twin wheel casters; and a safety belt. DIMENSIONS (HxLxW): 48 x 48 x 24 inches. Casters are 4 inches in diameter. WEIGHT: 38 pounds. COLOR: White frame. Fabric or solid vinyl upholstery is available in a variety of colors.

Durasoft Half Tray

The DuraSoft Half Tray is a swing-away lap tray designed for use as a wheelchair accessory by individuals with lower extremity or mobility disabilities or spinal cord injury. For those people who do not need the surface area that a full lap tray provides, the DuraSoft Half Tray provides a smaller surface on one side of the wheelchair. It is available in left- and right-handed models. The unit has a rigid insert covered by high resiliency foam with a solid cover. A raised outside edge keeps the u

Dx Compact 900 (Maxiflex)

DX Compact 900, also called Maxiflex, is a powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 87 x 62 centimeters. The chair has a 117 centimeter turning radius. CONTROLS: P&G Dynamic electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. The comfort seat is padded with a full back. ARMRESTS: Height- and width-adjustable armrests. WHEE

Dynamic Articulating Footrest

The Dynamic Articulating Footrest is a footrest extender designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. This footrest extender allows for both extension and rotation of the footplates to mimic the motion of the knee joint and leg. It also allows for three different ranges of articulation (knee rotation): 0 degree (linear motion only), 30 degrees and 50 degrees. A shield is used to prevent pinch point

Dynamic Forehead Strap System (Model Dfs-1)

The Dynamic Forehead Strap System is a headrest accessory designed to support the head for individuals who have difficulty maintaining their head in an upright position. It is meant for use with the S.O.F.T. headrest system (see separate entry). The system consists of pulleys that allow the forehead band to move with the user, providing greater freedom of movement. The strap is designed to float about freely with the user. The straps are available in two different styles. The first features a te

E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)

The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION

E-Motion

E-Motion is a power assist for wheelchairs designed for use by individuals with mobility disabilities. This unit can be retrofitted to most manual wheelchairs simply by replacing the existing rear push wheels with the e-motion wheels and installing a universal bracket on the wheelchair frame. The quiet brushless, gearless electric motors are located in the wheel hubs. The unit offers three different levels of power that can be selected at the touch of a button. Stage 1 offers a 30 percent power

E-Z-Lock Tray Clamp (Model 31096)

The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.

E.fix Basic & E.fix Plus

E.fix Basic and E.fix Plus are add-on power units for manual wheelchairs designed for use by individuals with mobility disabilities or spinal cord injury. These units come as a solid insert or pneumatic drive wheel system for adult or children's manual wheelchairs. With the electric drive installed, the wheelchair remains foldable and portable. Users can switch from power to manual operation by turning the wheel hubs. The ergonomic joystick controller indicates battery capacity on a back lit liq

Eagle Health Aluminum Companion Chair

The Eagle Health Aluminum Companion Chair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 32.5 x 24 inches. The frame is lightweight aluminum and is available in either black or blue. SEAT (LxW): 16.5 x 16 inches. The floor-to-seat height is 20 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Fixed full-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests

Eagle Health Aluminum Frame Wheelchair

The Eagle Health Aluminum Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 41.25 x 36 inches. The frame is lightweight aluminum and is finished in black lacquer. SEAT (LxW): 16.5 x 15.5 to 16.5 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip-up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away f

Eagle Health Steel Frame Wheelchair

The Eagle Health Steel Frame Wheelchair is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 43 x 23.375 to 25.75 inches. The frame is triple-coated chrome steel. SEAT (LxW): 16.5 x 15.75, 17.75 or 19 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Blue padded nylon upholstery. ARMRESTS: Flip up desk-length armrests. WHEELS: Nylon wheels with polyurethane tires. FOOTRESTS: Detachable, swing-away footrests. CAPA

Eagle's Nest Field Events Chair

The Eagle's Nest Field Events Chair is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The chair is designed to leave the throwing arm free and to support the user while throwing. The standard design has casters and an armrest / push handle on the non-throwing side. The throwing side has no armrest, so the throwing arm is free, and has non-wheeled legs so the chair stays in place during the throw. Each chair is custom made.

Ease-A-Bump, Wheelchair Bumper

Wheelchair bumper fabricated of 1 inch wall steel tubing. Covered in urethane foam padding with nylon cover. Weighs 5 pounds. Attaches to most wheelchairs with swing away foot rests. 13, 15, and 17 inch widths. Specify width of chair when ordering. Black.

Easy Platform Wheelchair Rocker

The Easy Platform Wheelchair Rocker is a rocking attachment for a wheelchair designed for use by individuals who use wheelchairs. This device enables the user to experience the benefits of rocking without transfering from a wheelchair. The rocker features entry/exit using a rear ramp. The adjustable front caster stops center the wheelchair on the platform and two safety straps secure the wheelchair to the platform for added security. DIMENSIONS (LxW): 48 x 30 inches.

Easyriser (Model Pl24Aj)

The EasyRiser, model PL24AJ, is a foot support designed to prevent pain in the back shoulders or arms for individuals whose workstation is standing at a tall counter. There is an anti-fatigue mat that provides cushioned comfort for the feet and legs and the sturdy steel frame and legs are built for durability. The platform adjusts to put the user at the right height to reduce fatigue and back strain, and the rubber feet hold the platform in position. The foot support is large enough to move arou

Easystand Magician Comfy Seat

The EasyStand Magician Comfy Seat is a child's mobile standing frame designed for use by children with lower extremity, mobility, or neurological disabilities. This standing system includes a wheeled frame with an upholstered seat that can be positioned for sitting, anterior tilt, or standing. Head and back supports maintain the child's position. Adjustments can be made to seat depth, kneepads, and footrests to accomodate growth or to enable different children to use the frame in a multi-user se

Ec+ Extra Care Bariatric Transport Chair (Model 6850)

The EC+ Extra Care Bariatric Transport Chair, model 6850, is a powered transport chair and stretcher designed for use by individuals with obesity and mobility, neurological, or severe physical disabilities. It converts from a chair to a stretcher in order to facilitate transport and transfers. FRAME: In stretcher position, height is adjustable from 24.5 to 32.5 inches. Overall greatest width is 33.5 inches. There is a full width push handle. CONTROLS: Electric operation with pendant controls. SE

Eclipse

The Eclipse is a manual sport wheelchair that is both lightweight (16 lbs. base weight) and strong (made of alloy materials of aerospace quality). FRAME: Frame is provided with an 85 degree front end to enhance mobility with a reduced turning radius. SEAT DEPTH: 10 to 15 inches. SEAT WIDTH: 10 to 20 inches. SEAT HEIGHT: 8 to 16 inches. BACKREST: Folding or non- folding, 8 to 16 inches high, 10 to 20 inches wide. Folding design allows adjustment, upright locking, and folding within one mechanism.

Eco-Buggy (Model 3210)

The Eco-Buggy, model 3210, is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities who are able to remain upright without upper-body positioning aids. FRAME (HxLxW): 11.5 x 45 x 16.5 inches when folded. The frame is powder-coated aluminum with a snap-on under-frame storage bag. SEAT (LxW): 11.8 x 13.75 inches. The seat depth can be adjusted from 11.8 to 14 inches to accommodate growth. The backrest reclines and has a height of 21 5/8 inches. A pel

Econoglide Transfer Boards

The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40

Economy Molded Lap Tray (Model A70711)

The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate

Economy Scooter Boards

The Economy Scooter Boards are designed to encourage movement, balance reactions and directionality. Fabricated from molded polyethylene, they roll on screwed-on rubber casters. OPTIONS: Sold individually or in sets of 12. One model features safety hand guards. DIMENSIONS: (Length x Width) - the boards are 12 x 12 inches or 16 x 16 inches.

Economy Wheelchair Belt (Model Mdt829110C)

The Economy Wheelchair Belt, model MDT829110C, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. This seatbelt restraint helps the wheelchair user to remain upright in the chair without sliding. This belt encircles the user and crosses in back. The belt is made of washable nylon and is latex-free. SIZES: One size fits all.

Econoslide Series Transfer Boards

Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model

Econotray Series

The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com

Eight-Ten Pac (Model Wh810)

The Eight-Ten Pac is an under seat pocket carrying accessory designed for use by individuals who spend long periods of time in a wheelchair. This carrying aid attaches to the frame of wheelchairs and hangs under the seat behind the user's legs. Features include SR-ADST Side Release Adapt A Straps system for quick attachment and detachment, and a large circular custom pull ring for easy detection and opening. This bag is made in the USA of highly durable nylon fabric with nylon tape bonded seams.

Elbow Support For Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted elbow support for a wheelchair user with hemiparesis following stroke. Following a stroke this individual experienced muscle weakness in her left arm which also affected her sitting balance. When sitting in her Sunrise Breezy wheelchair, her left arm would slip off the narrow armrest and she would fall sideways. Working with her occupational therapist, a commercial project was tried as a solution but proved to wide for th

Electric Wheelchair Power Socket

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with communication disabilities who uses a powered wheelchair to power a laptop computer with augmentative communication software using the wheelchair battery. Speech software was needed during school hours; however, the computer battery did not have sufficient capacity to meet the demand. To be heard in class, powered speakers were also needed, which further diminished operating time. A portable solution was necessary to enable the speec

Electrically-Assisted Human-Powered Vehicle

A multi-purpose four-wheeled two-passenger electrically assisted human-powered vehicle (EHPV) prototype is created to be used by people with physical disabilities, such as a person who does not have full strength in his or her legs. Additionally, the EHPV can also be used as a rehabilitation device, where an instructor can aid in pedaling the vehicle. The EHPV also functions as an alternate form of transportation for the environmentally conscious consumer, and is suitable as a recreational vehi

Elevated-Arm Lateral Support (Models 706020 & 706021)

The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.

Elevating Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a elevating wheelchair which allows individuals with mobility disabilities to access items out of vertical reach and/or to have visual access to items that could be seen by an individual standing. Two students focused on this problem for a final year project. Their answer is to lift the wheelchair and/or the occupant. The detailed answer is in a 130 page formal engineering report with 13 AutoCAD drawings to support the idea. The base was

Eliminator & Eliminator X

The Top End Eliminator and the Eliminator X are racing wheelchairs that are designed with aerodynamic frames and lower center of gravity for athletic individuals who use a wheelchair and wish to compete. Each bike comes standard with a helmet and tool kit. FRAME: The frame is made of custom 6061 T6 Aluminum T-frame. There are three cage designs: V, open-V, ar I-cage. The Eliminator X has a one-sided triagular fork. Overall length measures 56 to 66 inches in two inch increments. STEERING: Custom

Eliminator, The

The Eliminator is an airless cushion innertube designed for flat free use. It is lightweight, easy to install and shock absorbent. The arched web in the tube's interior protects from overload and permanent deformation. It may be used with standard tires of wheelchairs and bicycle tires, and can be reused when the tire wears out. DIMENSIONS: From 8 x 1.25 inches to 24 x 1 3/8 inches, at least 17 different sizes listed. WEIGHT: Can support over 200 pounds. WARRANTY: 2 year limited. COLOR: 14 avail

Elite

The Elite is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 22 x 37 inches, foldable for transport or storage. The Elite has an underbody ground clearance of 3.65 inches and a turning radius of 35 inches. Available colors are red, blue and silver. A detachable basket located under the seat is included. CONTROLS: An analog battery gauge and a battery indicator light are located at the top of the tiller bet

Elite Wheelchair

The Swede Elite is a lightweight manual wheelchair designed for use by adults with mobility disabilities. FRAME: Rigid titanium; available in black, seagreen, plum, lilac, blue, or red. SEAT: Seat width available from 14 to 18 inches; seat height is adjustable; seat depth is adjustable from 14 to 16, or 16 to 18 inches. Seat angle ranges from 3 to 10 degrees. Backrest is foldable. UPHOLSTERY: Detachable, washable nylon velour; black. ARMRESTS: Optional. BRAKES: Medium mounted. CASTERS: 5 or 6 in

Emergency Chair (Model 400)

The Emergency Chair, model 400, is an emergency evacuation carrier designed for the quick evacuation of individuals with severe physical disabilities and cognitive disabilities from multi-floor buildings. It is designed to go both up and down stairs with the ability to quickly change directions in the event of an obstruction. There are multiple points of lift and it negotiates stairs easily. Made of fire-retardant material, it is equipped with built in leg straps and a harness for secure transp

Emu Max

The EMU-Max is a three wheeled mobility scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter offers the user the option of sitting or standing while riding. The EMU-Max's special standing design offer users eye-to-eye contact with individuals who are standing upright. FRAME: The EMU-Max is constructed of a white and chrome finish frame. It has collapsible, height adjustable handlebars; front LED headlight; rear tail and brake lights, left and right

Endoflex Back

Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .

Endurance D / E Cylinder Holder For Wheelchairs (Model R103E)

The Endurance D/E Cylinder Holder for Wheelchairs, model R103E, is a cylinder cart for wheelchairs designed for use by individuals with mobility and respiratory disabilities. Made of chrome-plated steel, this carrier attaches to the seat back uprights of most wheelchair brands and accommodates D and E size oxygen cylinders.

Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)

The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)

Enduroline Plus Trays (Series 31200)

The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide),

Enduroline Series

The Enduroline Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of Melamine-impregnated fiber board with a woodgrain vinyl top, and are available in tray only, tray with routed stop groove, tray with anodized aluminum rim, tray with groove and straps, and tray with rim and straps models. All models have a rectangular work surface. SIZES: All models are available in child, adult, and extra-wide sizes. DIMENSIONS (WxD): Child-size models are 20.5 x 18 inches w

Enduroline Top Drop Quik-Fit Trays (Models 33007P, 33009P, 33011P, 33019P, 33007, 33009, 33011, & 33019)

The Enduroline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The Enduroline Trays are made of melamine-impregnated fiberboard. Models 33007P, 33009P, 33013P, a

Enduroline Top Drop Quik-Fit Trays With Control Cutouts (Models 33037, 33038, 33039, 33040, 33041, 3342, 33043, 33044, 33045, 33046, 33047 & 33048)

The Enduroline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout

Enfold Push Wheelchair

The Enfold Push Wheelchair is a transport wheelchair designed for use by individuals with head injuries or cardiac or respiratory disabilities. The chair provides full lumbar, neck, and head support. The gas spring facilitates patient transfers and allows the chair to be set at any angle. The four position leg rest is standard. A washable, natural lamb's wool cover is included. COLOR: Desert, Galaxy or Multi.

Enfold Rollabout Chair

The Enfold Rollabout Chair is a wheeled, reclining geriatric chair designed for individuals with severe physical or neurological disabilities, spinal cord injury, or Alzheimer's disease. Specially angled for comfort, this chair is equipped with a four-position leg rest. This chair is fitted with casters, one of which is directional for steering. The incontinence-proof seat is covered with a sanitized Medi-Flextra vinyl that is highly resistant to microbial attacks and broad-spectrum gram positiv

Enzo Wheel

The Enzo Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This is a light weight everyday wheel. Its 5-spoke design allows the user to reach through the wheel for access under and around the chair, while its handring design allows for multiple mounting width positions. The wheel has a CNC machined aluminum hubs with 0.5-inch sealed bearings, a lightweight aluminum double wall rim, and a durable powder coated f

Epic Aluminum Hub Narrow Court Caster

The EPIC Aluminum Hub Narrow Court Caster is a wheelchair caster wheel designed for use by people with lower extremity or mobility disabilities or spinal cord injury on sports wheelchairs. This wheel has a durable, hard-rolling 1-inch narrow tread designed for court and other sport activities. The urethane tread is spun-cast from virgin base chemicals. Like a super ball, the tread bounces back when compressed to minimize energy loss and absorb vibration. The solid urethane does not absorb water

Epic Aluminum Wide Softroll Caster

The EPIC Aluminum Wide SoftRoll Caster is a wheelchair caster wheel designed for use by people with lower extremity or mobility disabilities or spinal cord injuries. These extra-wide caster wheels have wide sloping sidewalls and an arced tread. Its shape facilitates pivot and roll, as the extra girth distributes the downward pressure so the wheel maintains higher floatation and does not sink into carpet and other surfaces. Like a super ball, the tread bounces back when compressed to minimize ene

Epic Composite Hub Narrow Court Caster

The EPIC Composite Hub Narrow Court Caster is a wheelchair caster wheel designed for use by people with lower extremity or mobility disabilities or spinal cord injury on sports wheelchairs. This wheel has a durable, hard-rolling 1-inch narrow tread designed for court and other sport activities. The urethane tread is spun-cast from virgin base chemicals. Like a super ball, the tread bounces back when compressed to minimize energy loss and absorb vibration. The solid urethane does not absorb water

Epic Composite Wide Softroll Caster

The EPIC Composite Wide SoftRoll Caster is a wheelchair caster wheel designed for use by people with lower extremity or mobility disabilities or spinal cord injuries. These extra-wide caster wheels have wide sloping sidewalls and an arced tread. Its shape facilitates pivot and roll, as the extra girth distributes the downward pressure so the wheel maintains higher floatation and does not sink into carpet and other surfaces. Like a super ball the tread bounces back when compressed to minimize ene

Equalizer Shooting System With Custom Chair Mount

The Equalizer Shooting System with Custom Chair Mount is a firearm support for wheelchair and a trigger adapter designed for use by people who use a wheelchair and have limited upper body movement. This system makes it possible for people with physical or neurological disabilities to hunt and shoot from their own wheelchair. The system has over 60 precision machined parts for durability and shooting accuracy, and each chair mount is custom adapted to the user's wheelchair. Multiple brackets can

Equalizer Tilt System

The Equalizer Tilt System is a powered tilt-in-space seating system designed for use by individuals with neurological or severe physical disabilities. This tilt-in-space system is designed to be mounted on a power base (not included) such as the Leisure-Lift, Inc. PaceSaver M1 powered wheelchair (see entry). CONTROLS: Integrated programmable Shark joystick controller. A swing-away controller mount and attendant control are optional. SEAT (DxW): 14 to 22 x 16 to 22; both dimensions are adjustabl

Ergo Lite Transit Wheelchair

The Ergo Lite transit wheelchair from Karma Mobility is designed for use by individuals with limited mobility in their lower extremities as a result of a stroke, spinal cord injury or cerebral palsy.  Features include the Ergo range seating system, an Aegis microbe shield and shaped seat designed  to add comfort and practicality. The user will be as safe as can be in this wheelchair without sliding from the seat.  In addition, there is a half folding backrest which allows the chair to easily fol

Erick

Steel frame stroller with 7/8 inch tubing. 8 inch rear wheels with locks, and double 6 inch swivel front casters. Interchangeable firm back/seat with 10, 11 1/2, and 12 1/2 inch width seats, with depths ranging from 10 to 14 1/2 inches. Height adjustable foot plate, fire retardant quilted cover, lap belt standard. Red. Accessories available for positioning.

Escort (Model 3200)

The Escort, model 3200, is a 3-wheeled powered scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 42 x 42 to 49 inches and the turning radius is 35 inches. It is available in midnight blue or burgundy red. This scooter is equipped with 5-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control bo

Escort (Model 4300)

The Escort 4300 is a four-wheeled powered scooter designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 44 x 42 to 49 inches. The turning radius is 37 inches. this scooter is available in midnight blue or burgundy red and is equipped with five-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control box mounted on T-sh

Essential Hardwood Transfer Board (Model P2300)

The Essential Hardwood Transfer Board, model P2300, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This hardwood board is sealed and highly polished for ease in sliding and features a tapered end and one hand cut-out. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 250 pounds.

Essential Plastic Transfer Board (Model P2301)

The Essential Plastic Transfer Board, model P2301, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This high-impact plastic board has a smooth surface for ease in sliding and features a tapered end. DIMENSIONS (WxL): 8 x 27.5 inches. CAPACITY: 250 pounds.

Etac Balder Finesse

Balder Finesse is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This front-wheel drive chair has a flexible chair-lift system and can be lowered into a complete horizontal position. FRAME (LxW): 35 inches (without footrest) x 26 inches (outside drivewheel). The length with the footrest extended is 45 inches. The height under the chassis is 3 inches. FWD: Front-wheel drive. SEAT (LxWxH): 19 x 17 x 15 to 33 inches. The sea

Etac Balder Junior

Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system

Etac Balder Liberty

Balder Liberty is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 inches (without footrest) x 26 inches (outside drivewheel). The height under the chassis is 3 inches. SEAT (LxWxH): 19 x 17 x 16 to 33 inches. The seat can tilt forward 15 degrees or backward 45 degrees. ARMRESTS: Flip-up, depth regulated armrest with adjustable height and angle. WHEELS: 3-inch tires in front and 8-inch tires in rear. The axl

Etac Cross Xl Wheelchair

The Etac Cross XL Wheelchair is a heavy-duty adult folding wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. Adjustments that do not require tools can be made with one hand. FRAME: Aluminum and steel tube folding frame with twin cross-tubes, in a choice of regular or long frame. Push-handles are height-adjustable with tools and removable. Anti-tips are included. Color options are black, blue, sea green, or plum. SEAT (L

Evac+Chair 300H (Model Mk-4)

The Evac+Chair 300H, model MK-4, is an emergency evacuation carrier that allows one non-disabled person to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with a handle located in the rear above the passenge

Evac+Chair 600H

The Evac+Chair 600H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with two rear ha

Evacuation Chair (Model 6254)

The Evacuation Chair, model 6254, is an emergency evacuation carrier designed for use by individuals with mobility disabilities. This chair features a rear Stair-TREAD system, a tank-style track system to enable the chair to be moved down stairs by one person without lifting. FRAME (HxWxD): 45 x 20.5 x 28 inches. The chair is 11 inches deep when folded. The lightweight aluminum frame folds for storage and features extendable head and foot lift handles with molded handgrips for two-person liftin

Everest And Jennings Or Prc

8 inch plastic wheels supplied by customer are machined to fit rigidly mounted sealed bearings and bolted axles. Bearings need no maintenance. Modification promotes smooth running wheels. Satisfaction guaranteed.

Evoflex Pelvic Stabilizer

The Evoflex Pelvic Stabilizer is a wheelchair seat belt designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury and others who use wheelchairs. The Evoflex has two parts that attach to opposing sides of a wheelchair's seat. When the user is seated in the wheelchair, the two parts attach using a push button seatbelt fastener or a Rehab Latch (available only for the medium and large sizes) to secure the user in the seat. The Evoflex's parts are semi-rigid

Evolution Back

Evolution Back is a wheelchair back support system designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The system is adjustable to accommodate growth and its "slide and snap" hardware is operable with one hand. It has an oversized self-inflating cushion for immersion of bony prominences, and is designed to work with lateral supports, hip belts, and hip guides. The system includes hardware with one inch of lateral a

Evolution Back Deep

Evolution Back Deep is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. It provides full posterior support and up to seven inches of lateral support. The seat can be adjusted in depth plus or minus three inches (up to 17.5 degrees of recline), and can be adjusted laterally plus or minus one inch at four points to accommodate growth or disproportionate body types. The system includes a PSIS

Excel 1000 Wheelchair

The Excel 1000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Diamond graphite powder-coated frame. SEAT: 16- or 18-inch seat. UPHOLSTERY: Black embossed upholstery. ARMRESTS: Permanent full-length or removable desk-length plastic armrests. FOOTRESTS: Fixed or swingaway detachable, elevating or non-elevating composite footrests. CAPACITY: 250 pounds.

Excel 2000 Wheelchair

The Medline Excel 2000 Standard Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel dual axle frame with chip-resistant chrome plating, powder-coated cross bars and clothing guard, heavy-duty fork and welded fork stems, and sealed bearings in fork housing for front and rear wheels. SEAT (LxW): 16 x 18 inches. UPHOLSTERY: Embossed upholstery in ruby, navy, or black. A chart pocket is included. ARMRESTS: Permanent full-length arm

Excel 3000 Wheelchair (Models Mds806150Dlx, Mds806200Dlx, Mds806250Dlx, & Mds806300Dlx)

The Excel 3000 Wheelchair is an adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight, scissor-style frame with three-position axle and cast aluminum seat cradle. SEAT: 18 inches wide. UPHOLSTERY: Nylon upholstery. ARMRESTS: Permanent full-length arms (models MDS806150DLX and MDS806200DLX) or removable desk-length arms (model MDS806250DLX). WHEELS: Composite wheels with push-button rear wheel release. This wheelchair has three axle positions for s

Excel Extra-Wide Wheelchair (Models Mds806400, Mds806450, Mds806700, Mds806750, Mds806700Fla, Mds806750Fla, Mds806800, Mds806850, Mds806800Fla, Mds806850Fla, Mds806900, & Mds806950)

The Excel Extra-Wide Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with chip-resistant chrome plating. SEAT: 20 inches wide (models MDS806400, MDS806450, MDS806700, MDS806750, MDS806700FLA, and MDS806750FLA), 22 inches wide (models MDS806800, MDS806850, MDS806800FLA, and MDS806850FLA), or 24 inches wide (models MDS806900 and MDS806950). UPHOLSTERY: Black on 300 pound capacity models or navy blue on all other mod

Excel K1 Basic Wheelchair

The Excel K1 Basic Wheelchair is an adult manual wheelchair designed for use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME: Frame has double coating of chrome plating powder coating and brass-threaded seat screw inserts to reduce stripping from upholstery changes.The frame features aluminum seat cradles and armlocks, and rear anti-tips. The wheels and casters have dual axles to allow for adjustment of the seat to hemi level. SEAT (DxW): 16 x 16 inches; 16 x

Excel K3 Lightweight Wheelchair

The Excel K3 Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Carbon steel frame with triple chrome plating. SEAT: 16 or 18 inches wide. UPHOLSTERY: Black nylon upholstery. ARMRESTS: Removable, padded, nylon upholstered armrests in a choice of desk length (for a 16- and 18-inch wide chair) or full length (18-inch chair only). CASTERS: Front casters. WHEELS: Rear wheels with composite handrims. FOOTRESTS: Swing-away detac

Excel K4 Lightweight Wheelchair

The Excel K4 Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Chromoly frame with chip-resistant triple chrome plating and cast aluminum seat cradles. SEAT: 16, 18, 20, or 22 inches wide. The sectional seat back can be adjusted from 15 to 19 inches high. UPHOLSTERY: Black nylon. ARMRESTS: Swing-back desk-length arms (available for all seat widths), swing-back removeable full-length arms (18-inch seats only), or desk-leng

Excel Kidz Chair (Model Mds806140Pede)

The Excel Kidz Chair, model MdS806140Pede, is child's manual wheelchair designed for use by children with lower extremity or mobility disabilities or spinal cord injury. FRAME: Frame has double coating of chrome plating powder coating and brass-threaded seat screw inserts to reduce stripping from upholstery changes.The frame features aluminum seat cradles and armlocks, and rear anti-tips. There are adjustable telescoping handles projecting from the top of the backrest, and the wheels and caste

Excel Narrow Wheelchair

The Excel Narrow Wheelchair is child's wheelchair designed for use by children and smaller adults with mobility disabilities or spinal cord injury. FRAME: Carbon steel frame with chip-resistant chrome plating and threaded seat screw inserts to reduce stripping from upholstery changes. SEAT (LxW): 16 x 16 inches. UPHOLSTERY: Navy with a chart pocket on the back. ARMRESTS: Permanent or removable full-length arms or removable desk-length arms with padded, upholstered armrests. CASTERS: Front caster

Excel Recliner (Models Mds808350, Mds808450, Mds808550 & Mds808650)

The Excel Recliner is a manual reclining wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This wheelchair provides full back and headrest support as the user reclines from 90 to 160 degrees. FRAME: Chip-resistant chrome-plated carbon steel frame with dual axle, dual sealed precision bearings, and anti-tippers. SEAT (DxW): 17 x 16 inches (model MDS808350); 17 x 18 inches (model MDS808450); 17 x 20 inches (model MDS808550); or 17 x 22 inches (model MDS80

Excel Shuttle (Models Mds809650, Mds809750, Mds809850 & Mds809585)

The Excel Shuttle, models MDS809650, MDS809750, MDS809850 and MDS809585, is a heavy-duty wheelchair designed for use by heavy or obese adults with mobility or lower extremity disabilities or spinal cord injury. The chair is latex-free. FRAME: Stainless steel frame with double cross brace. The wheels have a triple axel to adjust the hemi height of the seat. SEAT (WxD): 24 x 20 inches (MDS809650); 26 x 20 inches (MDS809750); 28 x 20 inches (MDS809850); and 30 x 20 (MDS809585). The seat has polypro

Excel Transport Wheelchair (Models Mds808150 & Mds808200)

The Excel Transport Wheelchair is a lightweight transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated carbon steel folding frame. SEAT: 17 inches wide (model MDS808150) or 19 inches wide (model MDS808200). UPHOLSTERY: Nylon upholstery. ARMRESTS: Permanent full-length arms with padded armrests. WHEELS: Composite wheels with dual-sealed precision bearings. FOOTRESTS: Detachable, swing-away footrests made of die-cast aluminum. CAPACITY: 250 pounds.

Exer-Rider

The Excer-Rider is a scooter board designed to provide therapeutic and recreational mobility for children with physical and neurological disabilities. This device consists of a seat platform with rollers and horseshoe-shaped handlebars. Almost impossible to tip, the unit is propelled by swinging the handlebars from side-to-side. This unit is also equipped with a back support and a seat belt. WARRANTY: A one year warranty.

Expandable Tray

The Expandable Tray is a wheelchair lap tray designed for use by individuals who use wheelchairs. The wooden surface provides a large surface support for elbows and forearms, enabling better trunk support. Available with or without mounting clamps, the tray can be used on manual or powered chairs or on standing positioners, and adjusts to various widths. When not expanded, the tray fits through doorways and aisles. SIZES: Medium or large. DIMENSIONS: Each side extension adds 4.5 inches to the wi

Extended Handles

The Convaid Extended Handles are wheelchair push handle extensions designed for use by a companion or caregiver when pushing a manual wheelchair. The Extended Handles provide a more ergonomically positioned handle intended to reduce the strain on the back and wrists of tall people. They also can enhance a person's ability to maneuver a wheelchair up and down hills and stairs. The handles fit most standard, transit, and planar models of pediatric wheelchair and strollers. The extensions sold in p

Extended Width Armrest (Model 77382)

The Extended Width Armrest, model 77382, is an add-on armrest designed for with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs, especially those who spend extended periods of time in wheelchairs. Intended to provide a wider resting surface without increasing armrest height, this armrest accommodates individuals with upper extremity edema, flaccidity, or increased tone by decreasing the risk of slippage and damage to the arm and should

Ez Rider (Models Ez12, Ez14, Ez16, & Ez18)

EZ Rider is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This folding lightweight wheelchair is available in regular and transit (bus/van tie-down) models. FRAME (HxLxW): Model EZ12 is 36.5 x 43 x 19.5 inches, model EZ14 is 37 x 44 x 20.5 inches, model EZ16 is 37 x 45 x 21 inches, and model EZ18 is 37 x 45 x 24 inches. Folded dimensions are 14.5 x 43 x 13.5 inches (model EZ12), 14.5 x 44 x 12 inche

Ez Rider Convertible (Models 174Mc, 174Mbc, 174Tbc & 174Tc)

The EZ Rider Convertible is an attendant-propelled child transport chair or stroller that converts to a standard child manual wheelchair. This chair is designed for use with children ages 5 to 13 who have some upper body control. FRAME (LxWxH): Folding, lightweight, flexible steel frame with black powder coat finish. Models 174MBC and 174TBC have been crash tested and include tie-down brackets. Models 174MC and 174MBC are 44 x 20.5 x 36.5 inches open and 44 x 13 x 12.25 inches folded; models 174

Ez-Shopper 8000

The EZ-Shopper 8000 is a four-wheeled scooter designed for use by retail customers with mobility, walking or lower extremity disabilities or spinal cord injury. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME (HxLxW): 38 x 55 x 26 inches. The scooter has a heavy duty 1.25-inch steel frame with shock-absorbing and dent-resistant decks. The rear deck flips up to access motor and batteries. It has a reinforced tiller column with an added bra

Fastback

The Fastback is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. This air and foam flotation cushion is comprised of three densities of foam, positioned according to density to provide mild lateral support, scapular contour, and vertebral comfort and pressure relief. A valve allows the user to release more air for greater envelopment and stability. Other features include a PSIS block for l

Feeder Board Attachment.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Attachment for a wheelchair laptray, used to stabilize dishes and glasses for a user who lacks coordination. The feeder board clamps on top of a regular laptray with medium size C clamps. The dishes, cups and glasses the person uses fit into cutout holes in the board. Topview and sideview diagrams included. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Insti

Figure-8 Clamp (Models 32310 & 32310B)

The Figure-8 Clamp is a seating hardware and a mounting clamp for accessories designed for use with wheelchairs. The two-part clamp is used to attach controls, accessories, and other devices to wheelchairs. One side of the clamp accommodates .75-inch tubing and the other side accommodates 7/8 inch tubing. Deep-set cap screws are used to tighten clamp around tubing. Set screws can provide additional mounting stability. COLOR: Model 32310B comes in black. WARRANTY: The manufacturer warrants this p

Firm Grip Joystick Holder

The Firm Grip Joystick Holder was designed to allow easy use of the joystick for persons with limited or no use of one hand. Two straps hold the joystick in place, while four suction cups on the bottom of the device secure it to a flat surface in front of the computer. An optional plexiglass undersheet ($20.00) provides a workspace and assures a good hold for the suction cups. DIMENSIONS: 6 x 5 inches. WEIGHT: Less than 1 pound.

Fitness Is For Everyone.

Video exercise tapes for the physically impaired. Each 30 minute aerobic dance routine program includes a warmup period, activity period, and cool down period. Choose from sets or individual selections: Aerobics for paraplegia, quadriplegia, cerebral palsy, amputees; Strength and flexibility exercises for all types of disabilities; Aerobics for paraplegia and quadriplegia; Aerobics for Cerebral Palsy and amputees; Aerobics for paraplegia; Aerobics for quadriplegia; Aerobics for amputees; or Aero

Fixed Arm Troughs (Models 31339R, 31339L, 32339R, & 32339L)

The Fixed Arm Troughs are designed for use by individuals who use wheelchairs and have upper extremity disabilities. Available for the right or left arm, these troughs are made of heavy-duty plastic and are equipped with brackets that slide over the existing armpads. Models 31339R and 31339L are padded with Ensolite and models 32339R and 32339L are padded with imitation lambskin. COLOR: The troughs and the Ensolite padding are black. The imitation lambskin padding is natural.

Flashlight And Attachment (Model Fl-1000)

The Flashlight and Attachment, model FL-1000, is a cane, walker and wheelchair light designed for use by individuals who use walkers, canes, and wheelchairs. The light attaches to any tube product with a diameter of .875 to 1 inch. It comes with a wrist strap and a clip that pivots 360 degrees to change the direction of the light. The light can also be detached from the clip for use as a flashlight. This light can also be used with bicycles and baby strollers. No tools are required for attachmen

Flat Foot Rest With Heel Straps

One pair of custom size slotted Kydex foot rest plates with mounting hardware and velcro heel straps. Mount to existing wheelchair footplates to increase foot placement area. Slotted for forward and back adjustment on footplate.

Flat Free

The Flat Free is a pneumatic tire designed for wheelchairs. This innertube is made of variable density air cushioned rubber and polymers. This tire is designed to maintain constant air pressure, to be impervious to heat or cold, and to not go flat. The tire has a hollow core for shock absorption. No special tools are required for mounting. SIZE: Available in all sizes.

Flat Pac (Model Wh180)

The Flat Pac WH180 is a under seat pocket designed for use by individuals who spend long periods of time in wheelchairs. This seat pocket permanently attaches to the underside of a wheelchair seat with Velcro where it is hidden for added security. The seam is stitched down the center of the bag so the chair can be folded without articles getting in the way. The Flat Pac has a pocket for keys and a double zip closure with large pull rings. DIMENSIONS (WxD): 14 x 11 inches.

Flat Top Lateral Roll Armrest

The Flat Top Lateral Roll Armrest is an add-on armrest designed for use by individuals who use wheelchairs. This armrest fits over the existing armrest and the wide foam top provides comfort for the arm while discouraging lateral leaning. The design prevents spinning of the support around the armrest and prevents shoulder elevation. A low-profile model fits hemi wheelchairs and those that have less than three inches of clearance between the top of the finger guard and the bottom of the armrest.

Flat-Proof Tire (Model Npc-Pt444)

The Flat-Proof Tire, model NPC-PT444, is a foam- core tire and wheel designed for use on power wheelchairs or scooters. The tire is made of 65 durometer rubber with American Airless soft/solid foam filling, and has a diamond lug tread for traction in any environment. The rim is two-piece stamped steel. DIMENSIONS: 10 inches in diameter x 3.5 inches wide. WEIGHT: 5 pounds.

Fleece Arm Rest Pads Or Fleece Wheelchair Arm Rest Pads

The Fleece Arm Rest Pads or Fleece Wheelchair Arm Rest Pads are designed for use on wheelchairs, office chairs, or walkers. These pads can be taken on and off with the sewn in Velcro brand closure strips. DIMENSIONS: 12 x 11 inches. COLOR: Dark green, brown, gray, black, red, blue, fuchsia, white, or purple.

Fleece Wheelchair Armrest Covers

The Fleece Wheelchair Armrest Covers are wheelchair armrest pads designed to prevent skin irritation. These padded fleece covers attach with Velcro. DIMENSIONS: These pads are available in 10 inches long or 14 inches long. COLOR: Natural.

Fleece Wheelchair Armrest Pouches

The Fleece Wheelchair Armrest Pouches are wheelchair armrest pads and side pouches designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The pouches are made of washable denim and feature fleece armrest covers that provide comfort and protection to elbows and wrists. The armrest pouches can be mounted over wheelchair arms with Velcro fasteners. Each pouch features a convenient storage compartment for carrying books, ma

Flex Array

---- PROTOTYPE --------- PURPOSE: To create a prototype of a proportional drive head array for individuals with tetraplegia. The Flex Array is a powered wheelchair controller that is located in a headrest and activated by the movement of the user's head. It is designed to provide an easy user interface and reduce user fatigue, while its universal DB9 connector and low profile design give the user a better mobility experience. The Flex Array consists of a standard industry community board, embed

Flex, The

The Flex is a wheel lock system designed to enable individuals with use of only one hand to lock both wheels of a wheelchair simultaneously. This device can be installed on either side of the wheelchair. It fits most manual wheelchairs with round tubing and does not interfere with the collapsing mechanism of a folding chair. WEIGHT: 1.2 pounds.

Flexi-Fit Wheelchair Gloves

Flexi-Fit Wheelchair cloves are push gloves designed for use by individuals with severe physical disabilities, spinal cord injury, or who have had strokes. Designed for individuals with limited hand function, these gloves open wide for ease in putting them on. Made from quality neoprene, these gloves have a small textured area built into the palm for added grip. SIZES: Small, medium, large, or extra large.

Flexmobil 600

Flexmobil 600 is a six-wheel powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. A variety of modular accessories are available. The turning radius is 96 centimeters. CONTROLS: P&G Dynamic electronics. MWD: Mid-wheel drive. SEAT (LxW): 46 x 46 centimeters. The seat has an anatomical design. The backrest height is 30 centimeters. The chair includes an electric seat lift for getting in and out of the chair. UPHO

Flexrim

The FlexRim is a handrim designed for use by people with mobility and lower extremity disabilities and spinal cord injury and others who use wheelchairs. This rim replaces the chair’s existing handrim and adds less than five ounces to each wheel. The handrim is made of soft, high friction rubber that attaches to the push rim of the wheelchair. It molds to fit the hand, acting as a cushion and flexing to conform to the user’s hands and arms and provide shock absorption for the user’s hands as he

Flip Away Half Lap Tray (A7079, A70710, A70712 & A70713)

The Flip Away Half Lap Trays, models A707-9, A70710, A70712 and A70713, are lapboards designed for use by individuals who use wheelchairs. The easy-to-clean plastic trays secure on either the right or left side of a full-length or desk-style upholstered wheelchair arm. These trays offer comfortable support and lift up and out of the way during patient transfers or wheelchair storage. DIMENSIONS (WxD): 13 x 21 inches with a one-inch molded rim and 3.5 inch diameter recessed area for cup or glas

Flip-Up Armrest

The Flip-Up Armrest is an elevating armrest designed to be attached to 7/8 inch tubing back uprights or to a back insert. The armrests have adjustability in height and angle and swing up for transfers. The armrests do not include pads.

Fly-Lite Aluminum Transport Chair

The Fly-Lite Aluminum Transport Chair is a folding transport wheelchair designed for use by individuals with lower extremity, mobility, or walking disabilities. FRAME (LxWxH): 33 x 22 x 36 inches. The folded width is 9 inches. Aluminum frame is available in blue, black or burgundy. SEAT (WxD): 19 x 15.5 inches. Back height is 18 inches; and the seat-to-floor height is 18 inches. The seat back folds down, and a seat belt is standard. UPHOLSTERY: Soft wipe-clean nylon fabric in blue plaid, black o

Flying Turtle (Model R-Ft)

The Flying Turtle, model RF-T, is a scooter board designed for use by children and small adults with lower extremity disabilities. Designed for use on any hard surface indoors or outdoors, the Turtle features a low-to-the-ground chrome-plated steel frame with a polyethylene seat. The user propells the unit by moving the handles attached to the front foot bar from side to side. DIMENSIONS (LxWxH): 27 x 19 x 8 inches. CAPACITY: 150 pounds. COLOR: The handlebars have a powder-coated chrome finish a

Folding Manual Wheelchair Cover

The Folding Manual Wheelchair Cover is a wheelchair cover designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury or other people who use wheelchairs. Designed for manual wheelchairs, this cover is weather and dust resistant and is made for travel, wheelchair lifts and storage. Features include a Velcro seam with snap buckle; a front elastic band that wraps around the footrest; a rear drawstring cinch (cord lock) that secures the cover bottom to wheels

Folding Retractable Tray Table

The Folding Retractable Tray Table is a swing-away lap tray for a wheelchair for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This tray is designed for use with the Pride Mobility Jazzy, Invacare Pronto and Hoveround powered wheelchairs (see separate entries). Custom sizes are available. The table mounts on retractable arm that is mounted on the underside of one of the wheelchair's armrest. If the wheelchair has a joystick or other controller mounted on

Folding Safety Flag

The Folding Safety Flag is a safety flag designed for use on manual or powered wheelchairs or scooters. Designed to increase visibility, this penant-shaped flag has a folding shaft that enables the flag to fold below the user's head when entering and exiting vehicles or when not in use. COLOR: The flag is orange.

Folding Wheel For Wheelchair

PROTOTYPE --- PURPOSE: To create a prototype of the Crossbreed folding wheel for wheelchair users and individuals with mobility disabilities. The Crossbreed designer, Duncan Fitzsimons is developing a wheelchair-specific version of the Crossbreed with an integrated push rim and easy-to-use locking lever. The first models of this wheel are made from a carbon-fiber composite to meet the weight and stiffness requirements of the most demanding wheelchair users. This prototype is expected to be avail

Foot Board (Model S-61)

The Foot Board, model S-61, is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit fastens to one footplate and rests freely on the other to bridge the gap between them and create a one-piece foot support. The support flips up for transfers.

Foot Bracket Platforms

Several styles of platforms mount to wheelchair footplates for foot positioning. Complete assembly includes one pair of bent slotted plastic platforms, two pairs of plastic side plates which mount to footplate, one pair of heel plates or stops, and one pair of velcro foot straps. Adjustable in height, depth, and angle. Available in small (3 inches wide) and medium (4 inches wide) sizes. May be ordered as complete assemblies or individual replacement parts.

Foot Harnesses (Models 2A, 2B, & 2C)

The Foot Harness is a foot pedal attachment designed to keep feet fixed in place and provide neutral foot control on surfaces such as wheelchair plates and bicycle pedals. Sold in pairs, these foot harnesses promote proper alignment and weight bearing while helping to avoid injuries to the feet. Mounting hardware is included. The harnesses have a sandal-like design (heel/ankle straps) and a plastic mounting base for snap on/off attachment to the pedals. The length and width are adjustable. SIZES

Foot Hugger (Models 6351, 6352, 6353, & 6354)

The Foot Hugger is a legrest panel designed to prevent the wheelchair user's feet from sliding off the foot plates. This foam-cushioned panel is covered in wipe-clean vinyl. This unit protects the user's legs and includes an attached extender to raise the height of the foot plates. DIMENSIONS: All models fit 18-inch wide chairs. Model 6351 is one inch high, model 6352 is two inches high, model 6353 is three inches high, and model 6354 is four inches high.

Foot Rest Boxes.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Boxes to attach to standard wheelchair footplates to maintain position of feet. Design for making wooden boxes to maintain child's feet on wheelchair footplates. Includes materials list and diagrams. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy to Make Aids for Your Handicapped Child REF: Book: Human Horizons Series, p 126. Also available from Prentice- Hall, Englewood Cliffs, NJ. NARIC CALL NUMBER: R1798. 1981.

Foot Shields For Wheelchairs.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Bumper-like foot shield for a wheelchair to protect the feet in case of a collision. It can also be used to push a ball in some wheelchair sports. Describes a six inch high foot shield for a wheelchair made of vacuum-formed 3/16 inch high-density polyethylene and attached to the footrest with three tubes. Includes photographs and a diagram. COMMENTS: Suggests that except for the polyethylene portion the guard can be manufactured in any shop. Designed b

Foot Stool.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Small angled stool to facilitate putting on shoes and socks, tying laces or clipping toenails. Stool made of softwood, large enough to rest one or both feet on, holding the toes higher than the heels, making the feet easier to reach. Includes instructions an drawings. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Easy to Make Aids for Elderly People REF: London, England: Souvenir Press: p 30-31. Also available from Prentice- Hall, Englewoods C

Foot Support For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to have leg support in a wheelchair without creating pressure beyond the ankle. This device replicates a home footstool with the length reduced so only the ankle comes in contact with it. The unit attaches to the existing front rigging of the wheelchair and can be removed when not in use. TITLE: Wheeling Easy. JOURNAL: TAD Journal. REF: Vol. 12 no. 1, Autumn 2001: p. 16. PAGES (including cover): 2 2001.

Footboard And Brackets

One-piece ABS plastic footboard ($64). 3 sizes, 10 to 14 inches wide by 6 to 9 inches deep. Brackets ($47) attach footboard to bottom of solid seat insert. 2 size ranges, 6 to 9 inches long and 9 to 12 inches long.

Footrest Platform Tops And Bottoms

Top and bottom sections allow mounting of one-piece footplates to aluminum pans or other rigid seat panels. Removeable. Fixed or adjustable knee and ankle angles. X-style foot straps.

Footrest Receptacle And Pads

The Footrest Receptacle and Pads is a foot support made of a vacuum formed plastic shell covered with molded foam, and mounts to a standard wheelchair footrest or Otto Bock Fullcare Orthotic Seating or MOSS II systems. Each footrest receptacle ($83.75) and pad ($50.25) is ordered separately. DIMENSIONS (HxWxL): Large is 13 x 10 x 6 inches; Medium is 10 x 10 x 5 inches (outside dimensions). COLOR: Black and grey.

Footrest, Swing Tube, & Bracket

The Footrest Swing Tube and Bracket is a one piece footboard which mounts to the insert bottom to support the feet and allow the seat and footplate to move as one. Knee flexion angle may be varied from 45 to 180 degrees with mounting hardware. The Seat Mount Footrest (model 33400, $156) is made of metal. The Footrest Swing Tube (model 33422, $36) provides for the use of independent footrests and legrest cradels and still allows for insert mounting. The Pivot Bracket (model 33420, $48), Swing Tub

Forever Lever

The Forever Lever is a replacement scooter controller designed for use with Rascal, Liteway, and Fold & Go 370 mobility scooters. The unit includes an engager lever, handlebar mounting bracket, a long-life potentiometer, wiring harness, and installation instructions. The Forever Lever has been tested to withstand repeated usage up to 2,000,000 cycles; extreme hot and cold in temperatures from -104 to 248 degrees Fahrenheit; vibrations more extreme than driving over rough terrain for 24 hours

Forfar Flyer.

Child transporter can be used in institutions or at home. The transporter looks like a stretcher with a mesh fabric covering. The cart includes leg extensions to provide two heights: 12 inches or 34 inches from the floor. At the lower level the child can propell the cart along the floor. Two detachable side rails and a detachable head rail. Four 5 inch swivel casters. Chrome palted steel frame. Overall length 42.25 inches, overall width 22 inches. Weight: high position 34. 5 pounds, low position

Fractal Machine

---- PROTOTYPE --------- PURPOSE: To design a prototype an device that attaches to a wheelchair to assist individuals with lower extremity or mobility disabilities or spinal cord injury or others who use a manual wheelchair to exercise and maintain personal fitness. The Fractal Machine is a wheelchair exercise roller designed to assist wheelchair users to participate in anaerobic and aerobic exercises. It can also be used as a training device aid a new wheelchair user to adapt to using a wheelch

Freedom

The Freedom is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a front mesh basket. FRAME (LxW): 40 x 21 inches. Ground clearance is 2.8 inches and the turning radius is 30 inches. The scooter is available in red and disassembles for transport and storage. The frame is equipped with a tow handle to enable the scooter to be pulled across level surfaces. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustab

Freedom 2

Freedom 2 is a manual adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 15 to 19 inches (Regular) or 17 to 21 inches (Long) x 11 to 18 inches in one-inch increments. This chair is available in a choice of folding or rigid frame type, with bend push handles and an optional transport package for bus/van tie-down. The frame is powder coated in a choice of red, green, blue, yellow, white, black, turquoise

Freedom 2 Hp

Freedom 2 HP is a manual wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 15 to 19 inches (Regular) or 17 to 21 inches (Long) x 11 to 18 inches in one-inch increments. This chair is available in a choice of a folding or rigid frame with bend push handles. An optional transport package for bus/van tie-down is available. The frame is powder coated in a choice of red, green, blue, yellow, white, black,

Freedom 2 Kids

Freedom 2 Kids is a child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 10 to 14 inches (Regular) or 13 to 17 inches (Long) x 11 to 18 inches in one-inch increments. This chair is available with either a folding or rigid frame and an optional WC19 transport approved tie down system. The frame is available in red, green, blue, yellow, white, black, turquoise, pewter, purple, midnight blue, blue stardust,

Freedom Chair (Model 1550)

The Freedom Chair, model 1550, is an emergency evacuation carrier and transport wheelchair designed for use by people with mobility, lower extremity or walking disabilities, spinal cord injury and others who use a wheelchair. The Freedom Chair can be used to evacuate a person on level flooring or on stairs, and it can be used as transport chair indoors and outdoors. FRAME (HxLxW): 24 x 60 x 37 inches. Folding aircraft-grade aluminum frame. Folded dimensions (HxLxW) - 24 x 60 x 11 inches. The fra

Freedom Push Chair

The Freedom Push Chair is an adult stroller designed for use by small adults or older children with lower extremity, mobility, or neurological disabilities or cerebral palsy. This lightweight folding stroller has a bent handle for pushing and can maneuver over all types of terrain, including at the beach, park, or hiking trails. This stroller includes a multi-position sun canopy with a clear window. FRAME (HxWxL): 41 x 30.5 x 66.375 inches. SEAT: Seat width is 13.375 inches and back height is 27

Freedom Wheelchair Cup Holder

The Freedom Wheelchair Cup Holder is a wheelchair drink holder designed for use by individuals who use wheelchairs. Available for square or round tubing, this holder can also be used on scooters, walkers, rollators, and bed rails. The attached clamping mechanism tightens securely on any upright or horizontal tubing. To use, open the holder and adjust the holder's arms to hold 16- to 46-ounce cups, mugs, glasses or bottles with up to a four-inch diameter base. The holder closes flat when not in u

Freewheel Wheelchair Attachment

The Freewheel Wheelchair Attachment is an all-terrain third wheel designed for use by individuals with mobility disabilities or spinal cord injury. Once the FreeWheel is clamped to the footrest of a rigid frame wheelchair, the wheelchair user can safely traverse terrains such as grass, sand, curbs, or rough roads and walkways. For folding wheelchairs, the FreeWheel can be attached using the Folding Wheelchair Adaptor (sold separately). The FreeWheel, or FreeWheel with Adaptor, comes with everyth

Frontier Mwd All Terrain Wheelchair

The Frontier MWD All-Terrain Wheelchair is a sport wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use. FRAME (LxW): 905 millimeter overall length x 710 millimeter base width. The frame has six-wheel articulating suspension. CONTROLS: DX2 High dynamic controls. MWD: Mid-wheel drive. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches; larger sizes are also available. Available s

Frs 3-D Fixed Position Wheelchair Mount

The FRS 3-D Fixed Position Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), the flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mou

Frs 3-D Folding Wheelchair Mount

The FRS 3-D Folding Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount pla

Frs 3-D Swing-Away Wheelchair Mount

The FRS 3-D Swing-Away Wheelchair Mount is a communicator mounting kit for wheelchair or scooter designed for use by individuals with communication and mobility, neurological or severe physical disabilities. Designed for use with the ComLink communicators (see separate entries), this flexible mount system is available with a variety of frame clamps to allow attachment to most wheelchair or scooter configurations. The ComLink communicator attaches to the mount by sliding the communicator's mount

Full Power Superstand (Model Ps-2)

The Full Power SuperStand, model PS-2, is a powered stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a powered wheelchair with a powered standing mechanism. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid frame with push handles, rear anti-tips and front anti-tips when in the standing configuration. Each Full Power SuperStand wheelchair is custo

Funbike

Funbike is a handcycle wheelchair attachment designed for use by individuals with mobility disabilities, neurological disabilities, or spinal cord injury. This unit includes a wheel and hand crank which attach to a wheelchair to convert it temporarily into a hand-propelled cycle. The unit can be attached to a fixed frame wheelchair (recommended) or to a folding wheelchair without removable footrests. The frame and most components are made of aluminum. Standard features include a 20-inch diameter

Functional Forms Wheelchair Easel / Lap Tray

The Functional Forms Wheelchair Easel/Lap Tray is designed to provide a lightweight alternative to traditional lap trays for wheelchair users. Features include a built-in 20-degree angle, pencil holder/wrist rest, removable carrying strap, magnetic paper holder, and a hidden zippered pouch. This easel also has a water-resistant vinyl or leather covering. WEIGHT: 1 pound.

Fusion 16 Wheel

The Fusion 16 Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheel for everyday chairs has 16 12-gauge stainless steel spokes with a lacing pattern. The wheel is lightweight with a double wall rim, a custom forged and machined fusion hub, and sealed cartridge bearings. The hub and rim are anodized. This unit is compatible with a standard 6-tab hand-ring (not included). DIMENSIONS: Available with 24, 25

G-100+ Custom Built Cushion

The G-100+ Custom Built Cushion is an alternating air pressure flotation seat cushion designed to prevent pressure sores for people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. This system features computer controlled pressure management that increases and decreases air pressure in the cushion as needed. Each cushion is custom built to fit the user and wheelchair. POWER: Uses rechargeable nickel metal hydride batteries with a life expectancy

Garaventa Evacu-Trac (Model Cd7)

The Garaventa Evacu-Trac, model CD7, is an attendant operated emergency evacuation carrier designed to transport wheelchair users down stairs to safety during situations when building elevators cannot be used. This folding evacuation chair consists of a metal frame with six auxilliary wheels to allow it to move on flat surfaces and to pivot for negotiation on small stair landings, two rubber tracks to grip the stairs, and a sling-seat with adjustable safety belts with quick connecting Velcro str

Garaventa Stair-Trac

The Garaventa Stair-Trac is a portable wheelchair stairlift designed for indoor or outdoor use to allow an attendant to easily move a wheelchair user up and down most stair surfaces. The device fits most crossbrace wheelchairs, and will adapts to a child's narrow wheelchair. The device consists of a folding L-shaped unit with steel belted caterpillar tracks on the botton side to securely grip stairs, auxiliary wheels for flat surface travel, and a handle with the control mechanisms on the uprigh

Garaventa Super-Trac (Model Tre-52)

The Garaventa Super-Trac, model TRE-52, is a portable inclined platform wheelchair lift designed for use by wheelchair users. This lift can be used indoors or outdoors on the stairways of public or residential buildings. Its moving platform design accommodates all types of wheelchairs, including power, children's, sports, and conventional adult wheelchairs. To operate the lift, an attendant guides the user onto the platform in a reverse position. The user is secured on the platform by a series o

Gc Recliners

Reclining geriatric chair. Tubular steel frame, chrome plated. Gray rubber 5 inch swivel casters with nylon hubs. Five position reclining back (maximum 70 degrees from the upright position) with easy access lock/release mechanism on the rear of the push bar. Adjustable wheelchair tray with raised rim. Height adjustable, padded, flip-back footrest. Options: fixed or adjustable height arms, elevating legrests, swingaway headrest.

Gel Gloves (Model Vgb500)

Gel Gloves, model VGB500, are push gloves for manual wheelchair users. The gloves have polymer gel inserts in the palms to provide maximum impact absorption from harmful shocks and vibrations. The half-finger gloves are made of drum-dyed leather, terry cloth, and lycra with velcro closures on the backs of the wrists. SIZES: Small, medium, large, extra large, extra extra large. COLOR: Black palms with two-tone blue backs.

Gel Ovations Arm Pads

The Gel Ovations Arm Pads are wheelchair armrest pads designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. These pads are designed to provide comfort and protection to elbows and wrists, help prevent pressure sores or ulcers, and aid in healing of existing sores or abrasions. These pads come in a variety of sizes and have T-nut spacing to allow installation on most armrests without the need for modifications. DIMENSI

Gel Ovations Knee Buttons

The Gel Ovations Knee Buttons are knee protectors designed to prevent skin breakdown due to contact with metal legrest hardware. Sold in pairs, these gel protectors are available for manual fixed frame and elevating legrests. DIMENSIONS: 4.5 inches in diameter; 1.25 inches deep.

Geri-Chair

The Geri-Chair is a geriatric chair designed for use by individuals with mobility disabilities. This PVC resin chair is equipped with a reclining back and elevating legrests to provide 25 positions of adjustment. A web suspension system and a one-piece fluid-resistant cushion provide maximum comfort. The cushion is fully washable and will not retain odors. Locking casters provide mobility.

Geriatric Seating (9510/9810 Series)

The 9510/9810 Geriatric Seating models both feature upholstered, padded seating. Measurements for: Models 9510/9810 are overall 24.25 w x 44 h x 33.25 l, seat width 18, seat from floor 20.5 h, back from seat 25 h inches, except Model 9819 seat from floor height is 22.5 inches. The Geriatric Seating models standard features include a locking, six position service tray with a telescopic, 20 degree tilt; the tray is laminated to resist stains, full-width footboard covered with a non-slip vinyl mat.

GIUDI B30 Tilt in Space Wheelchair

The Guidi B30 is a wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury.  It comes with a frame made of chromed steel, painted with non-toxic epoxy powder paint. Giudi manual wheelchair comes with wide, wrap-around, antibacterial, padded, height adjustable headrests, with vertical and front/back rotation. Giudi tilting chair has wide and retentive back which can be arranged in four positions to vary the depth of the

Gizmo Tilt-In-Space Wheelchair

The Gizmo Tilt in Space Wheelchair is a lightweight wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): Cane length of 8 to 13 inches (extra small), 10 to 15 inches (small), 13 to 18 inches (medium), or 15 to 20 inches (long) x 10 to 18 inches wide in one-inch increments. The chair is available in a choice of a folding or rigid frame with optional transport package for bus/van tie-down. The chair has 4

Gloves For Life

Gloves for Life are push gloves designed for use by individuals with quadriplegia, paraplegia, or others with limited dexterity. Custom made of suede with rubber palm inserts, these gloves are designed to make wheelchair wheeling less strenuous. The palms of the gloves are applied to the rims of the wheelchair wheels to aid in propelling and braking the chair. Rubber palm pads prevent heat and friction, helping protect the skin of the palms. A D-Ring is attached to a hook-n-loop strap for a secu

Go-Bot

The Go-Bot is a powered cart designed to provide mobility and independence for children with mobility disabilities. Designed for children as young as 12 months of age to children up to 43 inches tall, this device can also be used as a transitional aid to train for powered wheelchair use. The device is designed for indoor use or outdoor use on level surfaces and consists of a powered mobility base with a combination positioning seat/standing aid in the center which enables the child to operate th

Go-Go Elite Traveller 3 Wheel Scooter (Model Sc40E)

The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver)

Go-Go Elite Traveller 4-Wheel Scooter (Model Sc44E)

The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are stand

Go-Go Ultra 3 Wheel Scooter

The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. T

Go-Kart

The Go-Kart is a powered cart designed for use by children or adults with lower extremity, mobility, neurological, or severe physical disabilities. FRAME (LxW): Seat on a yellow platform measuring 65 x 37.5 inches. The cart can operate on gravel, grass, and hard surfaces, with a ground clearance of 4 inches and a turning radius of 10 feet. CONTROLS: Joystick or switch control. UPHOLSTERY: Blue. BRAKES: Electric. WHEELS: 12-inch diameter pneumatic tires. FOOTRESTS: The user's feet rest on the fr

Golden Years Activity Chair (Models 510 & 511)

The Golden Years Activity Chair is a caster chair designed for use by individuals with lower extremity or mobility disabilities. This chair has fold-up footrests and five-inch total lock casters. Model 510 has a non-porous blow-molded tray with removable locking function; model 511 has no tray. DIMENSIONS (HxW): 44.5 x 23.5 inches. The seat height is 19 inches above floor level and the back height is 26.5 inches. The seat (LxW) is 20 x 19 inches. CAPACITY: 275 pounds. WEIGHT: 52 pounds.

Gowrings 4 In 4 Power Chair

The Gowrings 4 in 4 Power Chair is a powered reclining and elevating wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has powered rise, fall, and recline, with an extra low seat to fit under a steering wheel or a standard desk or table. FRAME (HxLxW): 115 (130 with headrest) x 102 x 61.3 centimeters. CONTROLS: Programmable joystick controls with five driving modes. RWD: Rear wheel drive. SEAT: Recaro seating system with powered rise and fall

Greenmont's Easypushbar

Greenmont’s easyPUSHBAR is a wheelchair push handle extension designed for use by a companion or caregiver when pushing a manual wheelchair. This stabilizing push bar spans the push handles of a wheelchair to make pushing easier for very tall people or people with lower back pain. Its ergonomic design allows for one-hand maneuvering and comfortable hand positioning. When using both hands, the push bar transfers power directly to the chair with less effort when navigating steep ramps, inclines,

Ground Fx! Lighting Kit

The Ground FX! Lighting Kit is a wheelchair light designed for decorative illumination of a wheelchair. The kit provides colored light under the wheelchair, with fun lighting effects that make the chair glow in a chosen color. The Kit contains 3 IllumiRay Mini lights. Each light has a 12-element circular LED array that emits a brilliant 35 degree cone of light with an output is 8200 MFC. The emitted beam helps the user to operate a wheelchair safely at night. Each light has an anodized aluminum

Growth Guidance Systems (Ggs)

Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt.

Guardian Easy Care 1000 Transport Wheelchair

The Guardian Easy Care 1000 Transport Wheelchair is a transport wheelchair designed for use by individuals with severe physical disabilities who require assistance for wheelchair mobility. FRAME: Choice of chrome-plated carbon steel or anodized aluminum frame. SEAT: Choice of 19 inch and 17 inch seat widths. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Full-length arms. WHEELS: Eight inch wheels in front and back. FOOTRESTS: Swing away removable footrests. WEIGHT: The aluminum model weighs 19

Guardian Easy Care 2000Hd Heavy-Duty And Extra Wide Wheelchairs

The Guardian Easy Care 2000HD Heavy-Duty and Extra Wide Wheelchairs are heavy duty wheelchairs designed for use by large or obese individuals with mobility disabilities. These extra wide adult manual wheelchairs have extra wide seats and reinforced construction. FRAME: The heavy-duty reinforced chromed steel frame has a dual axle which allows the seat (20-inch widths only) to be lowered to hemi height. SEAT: Available in 20-inch heavy duty and 22-inch or 24-inch extra wide seatss. UPHOLSTRY:

Guardian Easy Care 3000 Lightweight Wheelchair

The Guardian Easy Care 3000 Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Chrome-plated, carbon steel frame. Dual axle allows seat to be adjusted to hemi height. SEAT: Seat widths of 16, 18, or 20 inches are available. UPHOLSTERY: Padded nylon. ARMRESTS: Removable desk arms with padded armrests. WHEELS: Scratch-resistant composite handrim. FOOTRESTS: Swingaway footrests or elevating legrests are interchangeable with the in

Guardian Easy Care 4000 High-Strength Lightweight Wheelchair

The Guardian Easy Care 4000 High-Strength Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals who require a high-strength standard wheelchair. FRAME: The frame design eliminates seat guides and allows for custom backs and accessories. SEAT: Seat widths of 16, 18, or 20 inches are available. Height adjustable seat backs (16, 17, or 18 inches) are offered. ARMRESTS: Flip-back arms with an easy release mechanism. FOOTRESTS: Swingaway footrests or elevating legrests a

Guardian Easy Care High Strength Lightweight 4000

The Breezy Easy Care 4000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 30.5 x 23 to 27 inches. The frame is chrome-plated carbon steel. SEAT (LxW): 16 to 18 x 16 to 20 inches. The floor-to-seat height is 19.75 inches. UPHOLSTERY: Padded nylon upholstery. ARMRESTS: Removable flip-back desk-length arms. WHEELS: Composite mag wheels. FOOTRESTS: Swing-away footrests or elevating leg rests. CAPACITY: 250 pounds. WE

Guardian Escort

The Guardian Escort is a folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 18 x 16 inches. The folded width is 14 inches. Rear ant-tips are optional. SEAT (LxW): 16 x 16, 18, or 20 inches. The floor-to- seat height is 20 inches. UPHOLSTERY: Padded nylon or vinyl. ARMRESTS: Removable, padded, full- or desk-length arms. BRAKES: Spring-lock assisted wheel locks. CASTERS: 8-inch solid casters. WHEELS: 24-inch rear wheels are stan

GUIDI B12 Tilt in Space Wheelchair

The Guidi B12 is a wheelchair designed indoor use only for children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It comes with a frame made of chromed steel, painted with non-toxic epoxy powder paint. Giudi manual wheelchair comes with wide, wrap-around, antibacterial, padded, height adjustable headrests, with vertical and front/back rotation.   It comes equipped with 4 swiveling 12 centimeter wheels. 

Gunnell Bariatric Ram

The Gunnell Bariatric Ram is a manual reclining wheelchair designed for use by individuals with a mobility disability or spinal cord injury. This chair features an open front and back design. FRAME (HxW): 22 to 30 x 25.5 to 36.5 inch heavy-duty steel growing frame features an open design for leg contractures and ambulation. The upper frame can be reversed to reposition back wheels for users with limited arm and shoulder range of motion. The push handles are height adjustable to maintain handle

Gunnell Rehab Ram

The Gunnell Rehab Ram is a manual reclining wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxW): 22 to 30 x 25.5 to 38.5 inch heavy-duty growing frame features an open design for leg contractures and ambulation. The upper frame can be reversed to reposition back wheels for users with limited arm and shoulder range of motion. The push handles are height adjustable to maintain handle to floor height. This chair is available in 19 different fra

Gyroset

---- PROTOTYPE --------- PURPOSE: To create a prototype a wireless headset wheelchair control system for individuals with severe disabilities and/or quadriplegia. Individuals who are paralyzed from the neck down have a limited number of options to control their wheelchairs (i.e., joysticks, sip and puff tubes). Márton Juhász and Now Technologies, a Hungarian firm, have developed the GyroSet, an Android tablet-powered system that allows a person to use head movements to guide a powered wheelchair

H-18 Magic Arm

The H-18 Magic Arm is a mounting kit for tablet computers, communicators, or ebooks, an adjustable ebook holder and a stand for a tablet computer designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-18 includes the Super-Clamp which allows clamping to wheelchairs, bedrails, desks or tables; and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices or tablets such as the Auggie or Super-Auggi

H-57 Mini-Arm For All Ipads

The H-57 Mini-Arm is a stand for tablet computer designed for use by individuals with use of one hand, grasping or upper extremity disabilities, or arthritis. The H-57 is designed for use with the Apple iPad and other tablets. It includes the Super-Clamp (which allows clamping to wheelchairs, bedrails, desks or tables) and an iPad tablet holder without a case or an adjustable tablet holder (ATH). The user can select a standard, tall, or tall and wide ATH. The tablet can be removed from the holde

H-80 Short Arm

The H-80 Short Arm is stand for tablet computer and an adjustable ebook holder designed for use by people with grasping, neurological or upper extremity disabilities, cerebral palsy or arthritis. The H-80 includes the Super-Clamp (which allows clamping to wheelchairs, bedrails, desks or tables) and an iPad tablet holder without case or an adjustable tablet holder (ATH) for other devices/tablets such as Auggie/Super-Auggie (see separate entries), Barnes and Noble Nook, and Amazon Kindle. The user

H-92 Phone Holder

The H-92 Phone Holder is a cell phone holder and tablet computer mounting system designed for use by individuals with upper or lower extremity, grasping and mobility disabilities, individuals with use of one hand, and wheelchair users. The Phone Holder’s gel case attaches to the “Quick Connect” lever which screws into the end of a Short, Mini, Articulating, Magic Arm or Super Clamp (see separate entries). The screw size is 1/4-20. The Phone Holder expands from 1.625 to 4.5 inches. The “Quick-Con

Half-Power Superstand (Model Hps-2)

The Half-Power SuperStand, model HPS-2, is a powered stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a powered wheelchair with a manual standing mechanism. The user operates the standing mechanism with a vinyl coated lever and is assisted to the standing position by two gas cylinders. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid frame with pu

Halo Strap

Soft velcro strap with mounting hardware and D-ring closure. Mounts to headrest system by attaching to lateral headrest pads. Cloth lining available on request.

Hammer

The Hammer is a sport wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair has a wide front-end "hammer-head" made of aluminum tubing that can be used for offense or defense in contact sports such as rugby, hockey, football, and softball. FRAME: The "Hammer" is constructed of aerospace drawn tubing. Anti-tippers are included. The frame is available in a choice of over 20 solid colors, raw (unpainted aluminu

Hand Propelled Trolley.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Trolley, or cart, which is close to the ground so a child can propel it by hand. Trolley made of plywood, the base 15 by 34 inches or cut to fit the child, the back and sides made of 6 inch wide plywood cut down a quarter of the way forward. Ten inch wheels are located about a third of the distance from the rear. There are 2 casters, the one in front resting on the ground with the trolley in a horizontal position, the one in the rear 1/2 inch off the g

Hand Rims With Knobs (Model 41)

The Hand Rims with Knobs, model 41, are handrim projection knob units designed for use by individuals who are unable to grasp standard pushrims. These units feature chriome-plated handrims with 6 large, plastic projecting knobs attached. The knobs the assist the user with wheelchair propulsion.

Hand Rims With Projections (Model 42)

Hand Rims with Projections, model 42, are vertical handrim projections designed for use by individuals who are unable to grasp standard wheelchair pushrims. The unit features a chrome-plated pushrim with 8 rubber-covered vertical projections.

Hand Trolley.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Hand propelled trolley on casters for a small child to lie on or a larger child to sit on, to encourage the child to move around. Describes plywood hand trolley made of plywood (of whatever size is needed), 2 crosspieces and four 1 1/2 inch caster wheels. Caster guards may be fitted to prevent trolley from running over the child's fingers. An abduction board can also be added. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D TITLE: Eas

Handicap Placeard Hanger

The Handicap Placard Hanger is designed to fasten safely and securely to the rear-view mirror. It is designed to eliminate stretching and twisting of the back and neck muscles to hang the handicap tag. The "J hook" easily slides around the rear view mirror attachment arm. The Placard Hanger is designed to stay cool even in scorching hot interiors in the middle of the summer. It can be installed on any vehicle.

Hangin Out Bag (Model 160)

The Hangin Out Bag, model 160, is a wheelchair backpack or carrying bag for walker designed for use by individuals with walking or mobility disabilities. Available in cordura nylon or heavy denim, this bag is equipped with wide patterned or solid polyester webbing with black plastic side release buckle belt for hanging from U-shaped handles, wide armrests, walkers, or chairs that have no push handles. A top bag flap is also featured for monogramming. Other features include a single inner compart

Hard Anodized Handrim

The Hard Anodized Hand Rim is a wheelchair hand rim designed for use by manual wheelchair users with lower extremity or mobility disabilities or spinal cord injury. This is a long life lightweight alloy hand rim that fits 24-inch Quickie and Magic wheels that are standard on many wheelchairs. It provides a smooth hard surface to push with and its hard anodized coating allows heat to dissipate rapidly so the user's hands do not burn going downhill. The unit is attached by 6 rivnuts.

Haseltine Flyer (Model 504-C)

The Haseltine Flyer, model 504-C, is a wheelchair carrier designed to protect powered wheelchairs during airline travel. The two-piece carrier shell is rotationally molded of recyclable polyethylene and lined with foam padding. The chair is secured to the base piece which has a lip around it to prevent slipping during transit. An internal strapping system holds the chair and its accessories in place. The second piece of the carrier covers the chair and is fastened to the base. The carrier also f

Haseltine Roosevelt Flyer (Model 504-A)

The Haseltine Roosevelt Flyer, model 504-A, is a wheelchair carrier designed to protect folding manual wheelchairs during airline travel. The carrier shell is rotationally molded of recyclable polyethylene and lined with foam padding. An internal strapping system holds the chair and its accessories in place. The container is held closed by six Velcro straps threaded through a footman holder. An additional footman's loop can accommodate an airline luggage tag. The carrier also features an in-mold

Hatch Gloves

Hatch Gloves are push gloves designed for use by individuals who use wheelchairs. These gloves have genuine leather palms and cotton crocheted mesh backs, with half thumbs and fingers. SIZES: Extra-small, small, medium, large, extra-large, and extra- extra-large. COLORS: Tan or black.

Hausted All Purpose Chair Hydraulic Series (Models Apc-150-St & Apc-250 St)

The Hausted All-Purpose Chair Hydraulic APC Series is a stretcher wheelchair and transport wheelchair designed for use by individuals with mobility disabilities. This height-adjustable chair can be adjusted from a sitting position to a supine position, and is designed for use in a medical setting for transport and treatment. APC-150-ST has simultaneous foot section and backrest action, and APC-250-ST has either simultaneous or independent foot section and backrest action. Both models have a push

Hausted Electric Powered All Purpose Chair (Model Epc-250-St)

The Hausted Electric Powered All Purpose Chair, model EPC-250-ST, is a stretcher wheelchair and transport wheelchair designed for use by individuals with mobility disabilities. This chair is designed for use in a medical setting for transport and treatment. Features include a push bar, a built-in chart holder, and accessory wells on each side. FRAME (HxLxW): 23.5 to 31.5 x 75 x 27.75 inches. CONTROLS: This chair has electric controls for height, back support, leg section, and Trendelenburg adju

Have-A-Tray Carrier (Models 70612-3200/3400/6100)

The Have-A-Tray Carriers are caddys for wheelchairs, walkers, and crutches. The two-compartment carriers allow ready access to personal itms. The caddies are made of molded polypropylene copolymer with a drain hole in each compartment. Hardware is supplied with each model for proper attachment. DIMENSIONS: Inside dimensions are 11.25 x 2 7/8 x 7.75 inches. WEIGHT: Wheelchair carrier (70612-6100) is 2 pounds, walker caddy (70612-3200) is 1.3 pounds, and the crutch caddy (70612-3400) is 1.3 pounds

Hd3 Corpus

The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors

Headrest Swing Away Bracket (Sm-Hrsa240)

The Headrest Swing Away Bracket, model SM-HRSA240, is switch mounting hardware designed for use by individuals who use wheelchair headrests. This arm attaches to any Stealth or Otto Bock style headrest (see entries). It is made ready to mount an egg switch or a sensor in a spot pad. Once adjusted in place the user can swing it away when it is not needed and push it back to the same spot when needed.

Headsup Flexible Head Support System

HeadsUp is a head support designed for use by children and adults with neurological or severe physical disabilities or spinal cord injury. This support consists of a hat and flexible elastic bands that fasten around a wheelchair headrest or high seat or chair back to hold the head up. Each side adjusts independently from the other, creating the ability to apply the desired amount of tension. As the elastic stretches, it allows a full range of motion;as the elastic stretches, the resistance incre

Heartway Frontier Pf1 4 Wheel Power Scooter

The Heartway Frontier PF1 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. Rear anti-tippers are standard.C ONTROLS: Dynamic Rhino 110-amp controller with multi-function ajustable tiller and handle bars. SEAT: 18- to 22-inch swivel captain's seat. UPHOLSTERY: Contoured, padded vinyl seat. ARMRESTS

Heartway Frontier Pf1S 4 Wheel Power Scooter

The Heartway Frontier PF1S 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and a rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. The scooter is equipped with a rear anti-tipper wheel and it disassembles for transport or storage. CONTROLS: Dynamic Rhino 110-amp, multi-function display, adjustable tiller, and handle bars. SEAT: 18- to 22-inch rotati

Heartway Gypsy 3 Wheel Power Scooter (Model P33)

The Heartway Gypsy P38 Travel Scooter is a three-wheeled scooter designed for individuals with mobility disabilities. A front basket is included. FRAME (LxW): 41.7 x 21.3 inches. The chasis is made of aircraft aluminum and folds for transport. This scooter is available in yellow. CONTROLS: Dynamic Rhino 70-amp controller. SEAT: 16- to 18-inch fold down seat. UPHOLSTERY: Vinyl. ARMRESTS: Height- and width- adjustable flip-up armrests are standard. WHEELS: 8-inch front and rear flat-free tires. PO

Heartway Mirage 4 Wheel Power Scooter (Model Pf6)

The Heartway Mirage 4 wheel Power Scooter, model PF6, is designed for indoor and outdoor use by individuals with mobility disabilities and seniors. A front basket and anti-tippers are standard. FRAME (LxW): 48 x 24 inches. This scooter disassembles for transport or storage. Color choices are blue, red, or yellow. CONTROLS: Dynamic Rhino 70-amp controller and adjustable tiller. SEAT: 18-inch, height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Ele

Heartway Mystere 4 Wheel Power Scooter (Model Pf5)

The Heartway Mystere 4-Wheel Power Scooter, model PF5, is a four-wheeled heavy-duty scooter designed for use by individuals with mobility disabilities and seniors. Standard features include a front basket, headlight, and rear view mirror. FRAME (LxW): 56.7 x 24.8 inches. CONTROLS: Rhino 110 amp comtroller with adjustable-angle tiller and digital controls. SEAT: 18- to 22-inch highback captain's seat with headrest. The seat has dual direction and rotation capability. UPHOLSTERY: Contoured, padde

Heartway Nomad 4 Wheel Power Scooter

The Heartway Nomad 4 wheel power scooter is designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 45 x 24 inches. This scooter disassembles for transport or storage. Color choices are red or yellow. CONTROLS: Dynamic Rhino 70-Amp controller and adjustable tiller. SEAT: 18-inch height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic braking. WHEELS: 9-inch front and 10-inch r

Heavy Duty Stainless Steel Aquatic Wheelchair

The Heavy Duty Stainless Steel Aquatic Wheeelchair is a pool wheelchair designed for use by individuals with mobility disabilities. This chair is suitable for daily immersion and use in a pool environment. FRAME: Stainless steel folding frame with double cross bracing. SEAT: 16, 18, or 20 inches wide. UPHOLSTERY: Mildew resistant PVC mesh. ARMRESTS: Flip-up armrests. CAPACITY: 350 pounds.

Heel Loop (Model 83)

The Heel Loop, model 83, attaches to pegs at back of wheelchair footplates help to prevent the user's foot from slipping off footplate. The loop is fabricated of webbing. DIMENSIONS: 2 inches wide.

Heel Loop Flipper

Heel loop flipper automatically flips wheelchair heel loops out of the way when the footrest is turned up. The flipper slips over the footrest hanger tube and locks with one twist. The coil shaped device slips over the tube, with a finger extended out behind the heel loop so that it is guided into a fold. Does not work with naugahyde covered heel loops or with elevating legrests. Works with most models or wheelchairs.

Hi D Transfer Board (Model Bk6111)

The Hi D Transfer Board, model BK611, is a transfer board designed for use by individuals with mobility disabilities. Made of polyethylene plastic, this transfer board features a smooth easy slide surface with round corners and centered hand slot. DIMENSIONS (LxWxD): 26 x 10 x .5 inches. WEIGHT: 6 pounds.

High Quad Gun Mount (HQ100)

The High Quad Gun Mount, model HQ100, is a rifle, shotgun, pistol and crossbow support and trigger activator designed for use by people with severe physical or upper extremity disabilities or spinal cord injury who use a power wheelchair. Intended to make hunting accessible to individuals with no use of the upper extremities, this device is based on a mounting plate placed under the wheelchair’s seat cushion before the user transfers into the chair. Once the user is seated in the wheelchair, a v

High-Low Chair

The High-Low Chair is a positioning chair designed for use by children up to 45 inches tall with mobility or neurological disabilities. A pneumatic cylinder allows the chair height to be adjusted with a single lever or the seat and frome can be detached from the wheeled star-shaped pedestal base for use as a floor sitter. The colorful support seat is padded and covered in wipe-clean polymer-coated fabric. To hold the child comfortably in mid-line, the chair is equipped with a quilted cotton-line

Hill Holders

Hill Holders are incline holders designed to prevent roll back on hills or ramps when a wheelchair user changes grip on the handrim or rests. These wheelchair attachments are easily engaged or disengaged, and do not require finger dexterity. These wheel locks fit most wheelchairs with removable arms.

Hip Belt

Black nylon webbing belt, padded or nonpadded. 72 inches long by 1, 1 1/ 2, or 2 inches wide. Side release, pushbutton, or lever release buckles. Mounting bands to fit 7/8 or 1 inch tubing available.

Hip Belts (Model Ee 3C/103-5000)

Wheelchair seat belt. Nylin webbing and plastic delrin buckle. Has a pair of iliac crest relief pads so that the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.

Hip Pocket

Wheelchair side pouch attaches to armrest with velcro straps. Cordura nylon. Hip pocket measures 10 1/2 inches long, 6 inches wide and 2 inches deep. Inside compartment with zipper closure. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.

Hip Strap

Velcro strap with mounting hardware and D-ring or buckle closure. Mounts to back of solid back or underside of solid seat.

Horizon Recliner (Models Hr300 & Hr400)

Reclining geriatric chair. The top of the back folds to the rear to facilitate attendant transfers, or the extension can be removed to convert the chair to a standard height back. Padded seat and back with vinyl upholstery. Adjustable headrest and removeable head wings. Adjustable seat depth: 14 to 19 inches. Overall width with casters 25 inches. Adjustable calf pad can be reversed to use as a knee pad. Adjustable height, flip back armsrests. Seat width 18 inches. Seat height 21 inches. Recline

Hover Mounting Kit For Idevices

Hover Mounting Kit for iDevices is a mounting system designed to mount iDevices (i.e. iPads, iPad mini, iPhone 4, 4S or 5, etc.) using the Latitude Mounting Arm. It is designed for use by individuals with limited upper extremity coordination and strength, fine motor and grasping difficulties. This kit includes the Latitude Mounting Arm, Super Clamp, mounting plates and a Quick Start Guide. It is made out of strong carbon fiber. WEIGHT: 1.1 lbs/.5kg COLOR: Black WARRANTY/GUARANTEE: As stated by t

Hoveround Mpv5

The Hoveround MPV5 is a powered wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. Designed to have a very narrow turning radius and to be highly maneuverable in indoor and outdoor environments, this powered wheelchair has a unique Round for a Reason design with a round base and rear wheel steering that allows navigation around tight corners and through narrow spaces without damaging walls or furniture. FRAME: The circular base is 24

Hubscrub (Model 20 / 30)

The HUBSCRUB, model 20/30 is wheelchair cleaning system designed to clean, sanitize, and disinfect wheelchairs and other durable medical equipment. The system is housed in an aluminum cabinet with a door on the front. Within the cabinet are recessed, moving nozzles that spray hot (110 degrees Fahrenheit) water provided by a 1 horsepower wash pump. Water drains into a stainless steel internal sink from which water is pumped out by a .33 horsepower drain pump through a raised drain line two to thr

Hubscrub (Model 20 / 50)

The HUBSCRUB, model 20/50, is wheelchair cleaning system designed to clean, sanitize, and disinfect wheelchairs and other durable medical equipment. The system is housed in an aluminum cabinet with a door on the front. Within the cabinet are recessed, moving nozzles that spray hot (110 degrees Fahrenheit) water provided by a 1 horsepower wash pump. Water drains into a stainless steel internal sink from which water is pumped out by a .33 horsepower drain pump through a raised drain line two to th

Hurricane (Model Pmv5001)

The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo

Hybrid Scooter

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a scooter user with longer-distance mobility. Billy Bowers configured a transmission and engine to be added to his electric scooter, creating a hybrid gasoline/electric scooter to eable him to take his scooter on longer trips without fear of having the batteries be depleted away from a source for recharging. It can hold half a tank of gas and travel for 50 to 100 miles without refueling or charging. The hybrid scooter has a top speed of 15 miles per h

I Back (Model H)

Modification for any Freedom Designs solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Cut in the shape of a capital letter-I+ so that trunk supports are at the trunk and adjustable the length of the center section. Can be used with any hardware.

I-Transport

---- PROTOTYPE --------- PURPOSE: To create a prototype of a powered wheelchair that allows individuals with mobility disabilities to transition from a sitting to a standing position. Researchers at National Cheng Kung University in Taiwan have developed a battery-powered, joystick-controlled wheelchair that transitions from a sitting to a standing position with a push of a button. Additionally, the device has sensors built in that monitor blood pressure and respiration of the user. The i-Transp

Iadapter Device Adapter

This device adapter is meant to attach iPads or other tablet devices to wheelchairs. It is meant to work with the RJ Cooper & Associates' Magic Arm, Articulating Arm and Mini-Arm. The adapter attaches to the back of the iPad or tablet with heavy-duty Velcro.

Ibex Tran-Seat 700H

The IBEX Tran-Seat 700H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and belted treads to move the person down multiple flights of stairs and across landings to exit a building. The treads work with an adjustable pressure brake to allow the chair to be eased down stairs creating

Icon A1 Wheelchair

The Icon A1 Wheelchair is a modular manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheelchair can be adjusted to fit the user's changing body and needs. The suspension can be set to the user's exact weight or eliminated, and the compression and rebound can be tuned to reduce fatigue. FRAME: Fully adjustable rear suspension with center of gravity at 0, 1, 2, 3, or 4 inches. The wheelbase is available with widths of 13 t

Illumiray Lighting System

The IllumiRay Lighting System is a wheelchair light designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury and others who use a manual wheelchair. The system includes 2 white Solid State Mini Lights, 2 red Solid State Mini Lights, a Black Jack switch and a wiring harness. Each light has a 12-element circular LED array that emits a brilliant 35 degree cone of light with an output is 8200 MFC. The emitted beam helps the user to operate a wheelchair safe

Image Mid Wheel Drive Wheelchair

The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-

Impala

The Impala is a manual wheelchair designed for use by larger children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 88 to 120 x 102 x 62 centimeters (size 1), 88 to 120 x 102 x 66 centimeters (size 2), or 88 to 120 x 102 x 71 centimeters (size 3). SEAT (LxW): 40 to 45 x 40 centimeters (size 1), 44 to 49 x 44 centimeters (size 2), or 44 to 49 x 49 centimeters (size 3). The adjustable back height is 50 to 60 centimeters (size 1) or 54

Impala & Impala Kit

Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up

In Your Face Viewbase

The In Your Face Viewbase is a mounting kit for smartphones and other handheld devices that can be used by individuals with upper extremity or grasping disabilities. The unit consists of a flexible gooseneck with a lower clamp for attaching to a table, wheelchair, plane tray, or other support, and an upper clamp for holding the device. The top clamp is spring-loaded, allowing the smartphone to be inserted and removed. The clamp provides a padded and secure tight grip that fits all iPhone and iPo

Incrediback Moldable Reclining Back System

The IncrediBack Moldable Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and can be molded to accommodate kyphosis, scoliosis, and other spinal curvatures. The supports can be remolded as the user's needs change. The unit attaches easily to most chairs, reclines up to 20 degrees, and folds with the wheelchair. SIZES: Standard and tall. DIMENSIONS (WxH): T

Incrediback Rigid Reclining Back System

The IncrediBack Rigid Reclining Back System is a reclining wheelchair conversion designed for use by individuals with mobility disabilities. This system transforms a standard wheelchair to a reclining wheelchair and is designed for use by individuals without spinal curvatures who require relief from forward or lateral leaning or who rquire additional comfort. The unit attaches easily to most chairs and reclines up to 20 degrees. The tall modesl include a moldable headrest above the rigid shell.

Incredihugger Wheelchair Back

The IncrediHugger Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, scoliosis, or upper extremity disabilities. This replacement back can be custom molded to fit the user's body contours. Its lateral supports help discourage side leaning, and its seat recline of up to 30 degrees discourages front sliding. The back has four inches of height adjustment, and may be folded with the wheelchair. The back comes in a standar

Independence Mount With Notebook Plate

The Independence Mount with Notebook Plate is a wheelchair mounting kit for communicators and portable computers. Designed to be mounted on the right or left side of the wheelchair, this unit fits most communicators and portable computers and can be adjusted to hold the device at the right height, position, and angle for comfortable operation. This mount can be easily folded out of the way when not in use.

Independence Push Chair

The Independence Push Chair is a stroller and transport chair designed for use by children with lower extremity, mobility, or neurological disabilities or cerebral palsy. This chair maneuvers over all types of terrain and has a multi-position sun canopy with clear window. FRAME (HxLxW): 43.75 x 55 x 27.5 inches when assembled; 18 x 38.125 x 27.5 inches when folded (with wheels). The folding frame can be folded with one hand for transport or storage. SEAT: 12-inch wide padded seat with adjustabl

Independence Through Mobility.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Discusses the ATI- Hotchkiss (Appropriate Technology International) wheelchair manual, which provides instructions for building a strong, lightweight wheelchair. Discusses a manual developed to allow local manufacture, in developing countries, of a light, strong wheelchair that is less expensive than imports. Also discusses a basic tool kit, tools for bending, welding equipment, drill press, jigs and making locknuts. Includes drawings. COMMENTS: Guide

Independent Wheelchair Assistant (IWA)

---- PROTOTYPE --------- PURPOSE: To design a prototype of an electric power assist unit for a manual wheelchair for individuals with lower extremity or mobility disabilities or spinal cord injury so they can independently access their local communities safely and easily. The Independent Wheelchair Assistant (IWA) design utilizes the user’s own wheelchair, acting as a true assistant and eliminating the need to constantly transfer between other devices like scooters or power chairs. The user atta

Individual Footrest And Tops

Footrest tops ($295 per pair) allow adjustment of knee angle. Anterior-posterior adjustment. Removeable hardware attaches to aluminum pans or other rigid seat panels. Bottom of tube has clamp to allow use of standard footrest L-bars. Footrest bottoms ($185 per pair) have flip-up footplate with heel loop. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.

Inglis Drink-Aide

The Inglis Drink-Aide is a cup with holder designed for use by individuals who use wheelchairs or who have limited upper body movement. Designed to enable independent hands-free drinking, this unit consists of a 28-ounce insulated water bottle; a long flexible, vibration-resistant drinking tube; and a universal clamp. The clamp enables the unit to be attached to a bed, a wheelchair, etc. OPTIONS: Extra drinking tubes.

Innerthanes

Foam core tires for all three and four wheel wheelchair alternatives. Core of Endurothane is molded inside tire to conform to tire and rim. Never goes flat. Bolt two piece rim together and install.

Institutional Roller Racer (Model 5000I)

The Institutional Roller Racer, Model 5000I, is a riding toy or scooter board designed for use by children with mobility, balance, or lower extremity disabilities. Propelled by swinging the handlebars/footrests from side to side, the Roller Racer can be ridden by individuals ages three years through adult, indoors and outdoors. The "rams-horn" handlebars are designed to protect and keep hands inside the rail. The buffer wheels are designed to protect the handlebar and the riding surface as well.

Intelligent Wheelchair

---- PROTOTYPE --------- PURPOSE: A prototype based on Toyota’s advance collision detection technology for cars has been developed by researchers at Japan’s National Institute of Advanced Industrial Science and Technology for wheelchair users. The “Intelligent Wheelchair” has a set of cameras pointed in all directions mounted above the head of the rider to provide a complete 360-degree field of view. If the cameras detect potential hazards nearby, the wheelchair will slow down or come to a compl

Intelliwheels Easy Push

The IntelliWheels Easy Push is a two-gear wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheel's handrim is connected directly to a gearbox in the wheel's hub. When the user pushes on the tire, the wheel engages the standard 1:1 gear ratio, but when he or she pushes on the handrim, the gearbox engages a 2:1 gear ratio that requires half the effort of standard pushing for activities such as rolling through deep pile carpe

Interface Hardware

The Interface Hardware is headrest accessory hardware for the Occipital "T" Bar designed for positioning an occipital bar on a wheelchair. The Interface attaches to the rear of the occipital bar. DIMENSIONS: The swivel tubes are available in 4-, 6-, or 10-inch lengths. The "T" tubes are available in 4- or 6 inch lengths. COLOR: Available in black and stainless steel.

Invacare 3G Ranger X Rwd

The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches.

Invacare 3G Torque Wp Rwd Power Chair

The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,

Invacare 9000 Sl

The Invacare 9000 SL is a manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The standard frame color is chrome; options include deep purple, black, or silver vein. SEAT: The seat is available in a choice of 16, 18, or 20 inches wide. The standard seat depth is 16; 18 inches is optional. The standard seat-to-floor height is available in 17.5,

Invacare 9000 Xdt

The Invacare 9000 XDT is a manual adult wheelchair designed for use by tall and/or heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles are standard. The frame is available in tall, standard adult, and hemi. The standard frame color is chrome; cobalt blue, red, black, or silver vein are optional. SEAT: The seat is available in a choice of 16, 18, 20, or 22 inches wide. The standard seat depth is

Invacare 9000 Xt

The Invacare 9000 XT is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces in a variety of colors. Push handles and anti-tips are standard. The frame is available in standard adult, hemi, and super hemi. SEAT: The seat is available in a choice of 14, 15, 16, 17, 18, 20 or 22 inches wide on the adult and hemi models and 14, 15, 16, 17, or 18 inches on the super-hemi model. The st

Invacare 9000 Xt Full Recliner

The Invacare 9000 XT is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with crossbraces. The standard frame color is chrome; red, black, and silver vein are available. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches

Invacare A-6S / F-6S

The Invacare A-6S/F-6S is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors with dual rear and front customizable suspension. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A-6S has an adjustable seat angle and the F-6S has a fixed seat angle. The seat widths are available from 12 to 20 inches

Invacare A6 / F6

The Invacare A6/F6 is a lightweight manual sport wheelchair designed for use by individuals with mobility disabilities. FRAME: Rigid frame in a variety of colors. Both models feature a telescoping wheelbase which enables the chairs to be set up for maximum stability for first-time users or for maximum performance. SEAT: The A6 has an adjustable seat angle and the F6 has a fixed seat angle. The seat widths and depths are available from 14 to 20 inches in one-inch increments. The seat-to-floor hei

Invacare Action P7E

The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro

Invacare Careguard K2000

The Invacare CareGuard K2000 is a folding adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 31.25 x 23 or 25 inches with permanent arms. With removable arms the width is 24.25 or 26.25 inches. SEAT (LxW): 16 x 16 or 18 inches. The floor-to-seat height is 20 inches with 24-inch wheels. The hemi floor-to-seat height is 18 inches. UPHOLSTERY: Black flame- retardant and bacteria resistant vinyl upholstery. ARMRESTS: Padded, fixed-h

Invacare Excel Front Wheel Drive

The Invacare Excel Front Wheel Drive is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame folds to 14 inches wide including the joystick. Open, the chair is 26.25 inches wide x 32.5 to 39 inches long x 34 to 38.5 inches high. The full turning radius is less than 26 inches. Ground clearance is four inches. CONTROLS: Mark IV sized- and styled-joystick with programmable throw is permanently attached. This chair includes Action Virtual Service tha

Invacare Excel Front Wheel Drive With Captain Seat

The Invacare Excel Front Wheel Drive with Captain Seat is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME:This chair disassembles and folds for transport. Open, the chair is 24.75 inches wide x 43.5 inches deep x 35 to 39 inches high. The full turning radius is less than 25 inches. Ground clearance is four inches. The shroud is available in liquid black, candy apple red, ocean blue, or emerald green. CONTROLS: Mark IV sized- and styled-joystick with progr

Invacare Ivc 9000 Topaz Wheelchair

The Invacare IVC 9000 Topaz is a folding bariatric adult manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Triple chrome-plated, carbon steel frame. Options include an oxygen carrier, telescoping IV rod, and a crutch/cane carrier. SEAT (LxW): 18 or 20 x 20 to 30 inches in 2 inch increments. The floor-to-seat height is 15.5, 17.5, or 19.5 depending on wheel and caster package. UPHOLSTERY: Black or blue vinyl or nylon. The upholstery is flam

Invacare Ivc Lightweight Aluminum Transport Chair

The Invacare IVC Lightweight Aluminum Transport Chair is a folding adult transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 24.5 x 23.5 inches. The folding frame is made of lightweight aluminum. SEAT (LxW): 17 x 19 inches. The floor- to-seat height is 19.25 inches. The back folds down for transport. UPHOLSTERY: Flame-retardant, bacteria-resistant black nylon upholstery. ARMRESTS: Permanent full-length padded armrests. BRAKES: Wheel

Invacare Ivc Tracer Ex2 Wheelchair

The Invacare IVC Tracer EX2 is a manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Carbon steel frame with triple chrome plating and 14-gauge cross braces. SEAT (LxW): 16, 18, or 20 x 16 inches. The floor-to-seat height is 17.5 to 19.5 inches. UPHOLSTERY: Flame-retardant vinyl dual-embossed upholstery with heavy-duty inner liners in blue, ruby, or black. ARMRESTS: Padded full-length permanent arms, padded full-length fixed-height removable

Invacare Knee Walker 65960

The Invacare Knee Walker offers a cushioned substitution for crutches. This walker features an easy-to-operate ergonomic hand brake, soft knee pad, and easy folding for storage or transport. It provides maneuverability with the 5 inch front swivel wheels and height adjustability for a custom fit. A basket is also standard for this model.

Invacare Lynx L-3 3-Wheel Microportable Scooter

The Invacare Lynx L-3 3-Wheel Microportable is a three-wheeled powered scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. The frame is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning strap is optional. WHEELS: 8 x 2 inch

Invacare Lynx L-4 4-Wheel Microportable Scooter

The Invacare Lynx L-4 4-Wheel Microportable is a four-wheeled power scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches and turning radius is 51.2 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. This scooter is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning stra

Invacare Mvp

The Invacare MVP is a lightweight manual wheelchair designed for everyday use by people with mobility disabilities. FRAME: Two-part folding aluminum frame with a swing-away or fixed front frame and curved, square or extended (growth) frame. The frame is available in 20 colors at no additional charge. Widths range from 25 to 32 inches. A 10-degree bend back with push handles is standard; sportster and fixed back heights (12, 14, 16 and 18 inches) options with no push handles or straight push hand

Invacare Mvp Jr.

MVP Jr. is a manual child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Folding frame. The chair is available with three rear frame options (curved, square, or extended). SEAT (LxW): 9 to 19 x 12 to 16 inches. The seat to floor height adjusts from 15.25 to 21.25 inches in front and from 14.75 to 21.25 inches in the rear. An adjustable angle back option on the square frame offers four discrete positions. BRAKE

Invacare Patriot

The Invacare Patriot is a lightweight manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight folding frame in a variety of colors. Push handles are standard. A built-in amputee attachment provides an amputee setting. SEAT: The seat width is available in 14, 16, 17, 18, or 20 inches. The seat depth is offered in 16 or 18 inches. The seat-to-floor height is available in adult, hemi, and factory-set super hemi. The standard seat-to-floor heights are

Invacare Power 9000

The Invacare Power 9000 is a powered wheelchair designed for use by adults with mobility disabilities. FRAME: Folding steel frame with aluminum cross braces in standard adult or low seat configurations. With the joystick, this chair is 21.75 to 27.75 inches wide when open in the adult model and 23.75 to 27.75 inches wide when open in the low seat model. With the joystick, both models are 14.5 inches wide folded. The adult model is 35.25 to 39.25 inches high and the low seat model is 33.25 to 37.

Invacare Power Tiger With Orbit Seat

The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi

Invacare Pro Spin X4

The Invacare ProSPIN X4 is a lightweight folding manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: The lightweight aluminum frame available in 21 different colors. SEAT (LxW): 14 to 20 x 14 to 20 inches. The front floor-to-seat height is 15.5 to 21.5 inches and the rear floor-to-seat height is 13.5 to 20.5 inches. The back can be tilted up to 15 degrees forward or back. ARMRESTS: Flip-up height-adjustable padded arms in two-point or T-arm

Invacare Pronto M50 With Surestep Power Chair

The Invacare Pronto M50 with SureStep is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 34 x 24 inches with the foot board up, or 38 x 40 inches with the footboard down. This chair has a turning radius of 19.5 inches and a ground clearance of 2.6 inches. The shroud is available in deep blue pearl or candy red pearl. CONTROLS: Easy Remote programmer. MWD: The mid wheel drive allows for driving over thresholds and transi

Invacare Pronto M94 Bariatric Power Chair

The Invacare Pronto M94 Bariatric Power Chair is a heavy-duty power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 28 inches. The turning radius is 19.5 inches. The shroud is available in red, blue, or black. CONTROLS: An MKV NX80 controller is standard. An upgrade to an MKV EX controller is optional. MWD: The mid- wheel drive allows for driving over thresholds and transitions up to 2 inches high. SEAT (LxW): 16 x 18 inches. The flo

Invacare Tdx Sp Rehab Seat Power Wheelchair

The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor

Invacare Top End Transformer All Sport

The Invacare Top End Transformer All Sport is a manual sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair can be adjusted to play tennis, softball, basketball, hockey, football, table tennis, or badminton. FRAME: Rigid 606IT6 aluminum frame with a removable offensive wing or bumper and an adjustable center of gravity. The frame is available in Tall or Short sizes. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is adju

Invacare Torque Sp

The Invacare Torque SP is a powered wheelchair designed for use by adults with mobility disabilities. FRAME (WxL): 24.75 x 32.25 inches. The chair is 34.25 inches high in the low configuration and 36.5 inches high in the medium configuration. The ground clearance is nearly five inches and the turning radius is 29.5 inches or less. Dynamic anti-tippers are included. CONTROLS: Mark IV RII joystick is included on the standard model and the Mark IV A joytick is standard with the weight limit upgr

Invacare Tracer Iv

The Invacare Tracer IV is a heavy-duty manual adult wheelchair designed for use by heavy individuals with mobility disabilities. FRAME: Folding triple chrome-plated carbon-steel frame with dual crossbraces. The reinforced frame includes gussetted side frame and caster journals. Push handles are standard. SEAT: Sling seat in a choice of 20, 22, or 24 inches wide. The seat depth is 18 inches. The seat-to-floor height is 21 inches. The fixed back height is 16 inches. UPHOLSTERY: Flame-retardant du

Invacare Tracer Sx Recliner

The Invacare Tracer SX is a reclining manual adult wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles and anti-tips are standard. SEAT: The seat is available in a choice of 14, 16, 18, 20 or 22 inches wide on standard and hemi frames. The standard seat depth is 16 inches; 18 inches is optional. The standard seat-to-floor height is 19.5 inches. The back height is 23 inches with the removable 10-inch

Invacare Tracer Transport

The Invacare Tracer Transport is an attendant-propelled transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Triple chrome-plated carbon-steel frame with crossbraces. Push handles are standard. SEAT: Sling seat in a choice of 14, 16, 18, or 20 inches wide. The seat depth is 16 inches. The seat-to-floor height is 21 inches. The back is available in a fixed or a fold-down model (the fold-down back is not avaiable with the 14-inch seat) and the height is 16 inche

Invacare Xtra

The Invacare Xtra is a folding adult or children's manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Three-piece modular frame with one-inch aluminum tubing. The front frame section can be replaced to allow for growth. The square rear frame allows the wheels to be mounted directly under the back canes. This chair is available in a variety of colors. SEAT (LxW): 14 to 22 x 14 to 22 inches. ARMRESTS: Two-point or swing-away arms. WHEELS: Th

Invisible Wheelchair Lap Tray (Model 606303)

The Invisible Wheelchair Lap Tray is a clear plastic lapboard designed for use with wheelchairs. Fittings include T-bars, rubber belt fastening straps, and foam padding to protect armrests. The unit fits most standard arm wheelchairs. DIMENSIONS: 22.75 x 22 3/8 inches.

Inyo Heavy Duty Wheelchair Tire, The

The Inyo Heavy Duty Wheelchair Tire is a replacement rubber wheelchair tire designed for use by wheelchair users. This heavy-duty tire is designed for use on high profile rims and has a smooth, non-marking tread pattern. The tire is designed to provide super grip on slick surfaces. DIMENSIONS: 24 x 1 3/8 inches.

Inyo Wheelchair Tire, The

The Air Free Inyo Wheelchair Tire is a replacement rubber wheelchair tire designed for use by wheelchair users. This super-grip tire is designed to be used on high profile rims and has a non-marking tread pattern. DIMENSIONS: 24 x 1 3/8 inches; this tire also fits many 24 x 1.25 inch wheels.

Ipad Mounting System (Model 1556)

The iPad Mounting System, model 1556, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system is composed of three parts: a mounting platform for the iPad, a mounting arm, and a clamp. Two flexible cords that securely hold the iPad to the platform are included. The light duty mounting arm expands from 14.5 inches to 24 inch

Itilt2

The iTilt2 is a manual reclining tilt in space wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. It has dynamic tilt up to 47 degrees and manual recline up to 30 degrees. FRAME: 16, 18, 20, 22, or 24 inches wide. It has a tension adjustable spring tilt system with dual locking strut, care giver control lever, and tilt angle indicator. The iTilt2 has an adjustable rear axle; 0.5-inch wheel bearings; anti-tippers. SEAT: Adjustable sea

Iv (Intravenous) Rod And Holder (Model 95)

The IV (Intravenous) Rod and Holder is designed for use with most wheelchairs. This device mounts to a wheelchair back and extends up to hold IV bottles. DIMENSIONS: The maximum extension height is 30 inches.

Ivc 9000 Jymni Wheelchair

The IVC 9000 Jymni Wheelchair is a manual child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Chrome-plated carbon steel frame with stroller handles, available in lightweight or recliner style. SEAT (LxW): 10, 12, or 14 x 10, 12, or 14 inches. The seat to floor height is 15, 16, or 17 inches depending on wheel and caster package. The back height is adjustable from 14 to 15 inches. UPHOLSTERY: Fire-retardant up

Ix Transfer System

---- PROTOTYPE --------- PURPOSE: To design a prototype of a short distance transfer system for use by individuals with lower extremity and mobility disabilities, people with spinal cord injury and others who use wheelchairs, aided by a caregiver. The IX Transfer System is a transfer aid and transport wheelchair intended for short distance transfers that can be physically demanding on caregivers. It is designed to be used in communal spaces such as a hospital, skilled nursing centers or similar

J6 (Models 2S-C, 2S-Ss & 2Sp-Ss)

The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD:

Jay Active Back (Models 520, 522, 525, 527 & 528)

The Jay Active Back, models 520/522/525/527 & 528, is a back support cushion designed to provide comfort and stability for chair users. This contoured support cushion is composed of lightweight materials and features adjustable height and back angles designed to help relieve back pain. It also includes an "Air Exchange" cover designed to reduce perspiration and heat buildup. With a rigid back shell, this support cushion is not intended to bow or stretch. DIMENSIONS: All models feature adjust

Jay Adjustable Solid Seat

The Jay Adjustable Solid Seat is a solid seat insert designed to improve posture by providing a firm, fully-adjustable base of support. The seat is adjustable in height, width, depth, and angle to allow an immediate fit and future change, when needed. The seat is made of rib-reinforced urethane and has an anti-slide surface so that cushions will not shift. The seat insert is designed to fit all wheelchairs; the universal cross-bar cut-out allows dropping the seat depth on virtually all wheelchai

Jay Modular Back

The Jay Modular Back is a solid back insert made of aluminum that will accommodate either a Jay Custom Contoured Insert to fit deformities, or a Jay Standard Insert. The aluminum shell includes recline and depth adjustment, foam side guards, and clamp-on hardware. The Custom Contoured Insert includes a foam back with shim, full-width fluid pad, and an AirExchange cover. The Standard Insert includes a foam back with a spinal fluid pad and AirExchange cover. DIMENSIONS: Back shell is available in

Jazzy 1113 Ats (Models 2Sp-C & 2Sp-Ss)

The Jazzy 1113 ATS, models 2SP-C and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 23 inches with a 2.5-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac suspension, a low center of gravity and a non-folding frame. It has 6-inch front anti-tips. The chair is available in viper blue, onyx black, champagne and candy apple red. CONTROLS: 5

Jazzy 1170 Xl Plus (Models 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1170 XL Plus, models 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46.25 x 30 inches with a 4-inch ground clearance and a 26.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dy

Jazzy 1420 (Models 2Hd-Ss, 2Hd-C, 2Vhd-Ss, 2Vhd-C, 3Vhd-Ss & 3Vhd-C)

The Jazzy 1420, models 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46 x 27.25 inches with a 4.5-inch ground clearance and a 25.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by indep

Jazzy 1650 (Models 3Ehd-Ss & 3Ehd-C)

The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red,

Jazzy 600 (Models 2S-C, 2S-Ss, 3S-C, 3S-Ss, 3Sp-Ss & 3Sp-C)

The Jazzy 600, models 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS and 3SP-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.5 inches with a 3-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in champagne, candy apple red, viper blue, black onyx, kelly green, pewter, emerald green, sapp

Jazzy 614 (Models 2S-C & 2S-Ss)

The Jazzy 614, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD):

Jazzy 614Hd (Models 2Hd-C & 2Hd-Ss)

The Jazzy 614HD, models 2HD-C and 2HD-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (Wx

Jazzy Elite 6 (Models 2S-C & 2S-Ss)

The Jazzy Elite 6, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 23.25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-li

Jazzy Freedom

The Jazzy Freedom is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT

Jazzy Select 14 (Models 14-C & 14-Ss)

The Jazzy Select 14, models 14-C and 14-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 38 x 24.75 inches (without front riggings) with a 3-inch ground clearance and a 21-inch turning radius. This wheelchair has limited suspension and a non-folding frame. The chair is available in blue and red. CONTROLS: 60 amp joystick controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The st

Jazzy Select 6

The Jazzy Select 6 is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.625 x 23.5 inches with a 2-inch ground clearance (at anti-tips) and a 20.5-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with Active-Trac suspension and an articulating rear caster beam. The chair is available in red and blue. CONTROLS: 40 amp PG GC 2 controller. MWD: Two-moto

Jazzy Select Elite

The Jazzy Select Elite is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.375 x 22.75 inches with a 1.5-inch ground clearance (at anti-tips) and a 24.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 3-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with s

Jazzy Select Hd (Models Hd-Ss & Hd-C)

The Jazzy Select HD, models HD-SS and HD-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 37.75 x 25 inches with a 2.5-inch ground clearance (at anti-tips) and a 27-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 6-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazz

Jenx Bee Chair

Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle

Jewel Mps Wheelchair

The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche

Jimmie (Model Ul8Wpbs)

The Jimmie, model UL8WPBS, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 32 x 22.5 x 36.5 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. It has rear anti-tips. This portable chair can be dismantled into three parts for transport. The base is available in burgundy red. CONTROLS: Left- or right

Joybar

The JoyBar is a powered wheelchair controller designed to enable powered wheelchairs to be controlled using T-bar scooter-style operation. The ReBar utilizes a Center Drive System that consists of mounting hardware and a socket that can be mounted in three positions: in front of the seat on the center line; on the side beneath either armrest; or in the back of the wheelchair. When mounted on the side, the mast with the controller can be placed there to facilitate transfers or better access to de

Joystick (& Mouse) Trainer

The Joystick (& Mouse) Trainer is a wheelchair control switch assessment program designed to enable users to learn the skills necessary to operate a powered wheelchair without the risks associated with operating the chair itself. This program begins at a very early motor and cognitive level with simple exploratory activities for gross movement and cognitive awareness, moves through initial proportional path-oriented tasks, and graduates to maze games for fine control. As the user's skill le

Joystick (Model 3185)

A proportional type joystick used for mdoe selection and operation of a Dufco Multimode Interface. During wheelchair operation, this joystick provides precise control of both speed and direction. May be configured with a chin-cup for chin oeration, or a knob for hand operation.

Joystick (Model 3345)

An 8-direction, heavy duty, multiple switch actuator used for mode selection and operation of a Multimode Interface. Requires moderate operating pressure and is intended for hand operation by those with average strength.

Joystick (Model 3361)

An 8-direction, short throw, multiple switch actuator used for mode selection and oepration of a Multimode Interface. Requires moderate operating pressure and is intended for those with average strength. May be reconfigured with either a knob or chin-cup.

Junior Light Weight Wheelchair Gloves

The junior light weight wheelchair gloves are designed for children that use wheelchairs for mobility. These gloves include armara material to cushion the palm area. There is a full coverage for the thumb while the remaining portion of the glove is fingerless. These gloves were designed to aid in providing protection against skin damage caused by starting, stopping and turning the wheelchair. It may also provide additional grip on the push rim (to prevent slipping); improved stopping and mane

Just-A-Sac Wheelchair Bag

The Just-A-Sac Wheelchair Bag is a wheelchair back pouch designed for use by individuals who use wheelchairs. The pouch has one large, open-top pocket and attached loops slip over the wheelchair push handles. DIMENSIONS (WxH): 14 x 11 inches.

K-Special Back

The K-Special Back is a wheelchair back support designed for use by individuals with mild to moderate kyphosis and/or weakness of the trunk. This padded fabric back replaces the standard wheelchair upholstery, has a smooth surface, and is shaped to accommodate and support the user's entire back, eliminating pressure from the apex of the curve and providing lateral support. This back is available in slip-on or screw-on styles to accommodate most wheelchairs. Folding wheelchairs can be folded with

K300 Ps Junior

The K300 PS Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The K300 PS Jr.has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: Integra

K450 Mx

The K450 MX is a powered wheelchair designed for use by children and small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It features a powered seat-to-floor function that moves the seat forward and down from its normal height to ground level in front of the frame and back again. This function is intended to facilitate transfers or interacting with other people. FRAME (LxW): 33 x 24.5 to 28.5 inches. The minimum turn radius is 41.75 inches. The K450 MX

Kangapouch (Model 977)

The Kangapouch, model 977, is a wheelchair and walker caddy designed to afford people with mobility disabilities the ability to carry items with them. Made of corduroy, the Kangapouch features oversized, deep pockets and attaches to the front of a walker or the back of a wheelchair using Velcro straps. DIMENSIONS (LxW): 19 x 16.5 inches. COLOR: Assorted. WARRANTY: The manufacturer guarantees satisfaction with this product or it may be exchanged or returned for a full refund.

Katalavox

Katalavox is a voice input powered wheelchair controller that enables the user to control the movements of the chair by voice commands. Combinations of voice commands allow the wheelchair to take up to 84 driving positions including 4 forward speeds, 2 backward speeds, and 4 angles to the right or left. Commands can be given in any language.

Kaye My Red Walker

Kaye My Red Walker is designed for young children with neurological and motor disabilities such as cerebral palsy, dystonias and Angelman’s Syndrome who require posture support while learning to work. The Kaye My Red Walker places the support behind the child to insure upright alignment and placing the child’s center of gravity within the base of the walker for safety and balance. The walkers have 360 degree front swivel wheels which can be locked for straight ahead tracking. The swivel on the

Kaye Scoot About (Model Sb1)

The Kay Scoot About, model SB1, is a scooter board designed for use with children and adults with lower extremity or severe physical disabilities. This four-wheeled, height-adjustable device enables children and adults to sit on the seat and propel themselves with their feet and enabling them to work on heel strike and coordinated knee flexion and extension skills. These patterns, needed for ambulation, can be developed while seated in the absence of standing balance. The height-adjustable seat

Keyhole Back

The Key-Hole Back Support is a wheelchair back support designed for use by individuals with spinal curvature and other back disabilities. This back supports the user in an upright position, enhancing posture, visual field, respiratory function, balance and trunk support. The unit conforms to the individual body shape and a stretch fabric panel adjusts automatically to the severity of kyphosis, ensuring a custom fit. The user can change positions without sacrificing general support. Split back co

Kid Kart Tlc

The Kid Kart TLC is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 26.5 inches wide and is equipped with a height-adjustable padded push handle and a removable storage pack. The frame is available in a choice of black, yellow, or dusty plum. Options include transit tie downs and recline. SEAT: The seat shell can be positioned facing front or facing the rear and includes a tilt-in-space range of zero to 30 degrees.

Kid Kart Xpress

The Kid Kart Xpress is a stroller designed for use with children with severe physical or mobility disabilities. FRAME: The lightweight folding frame is 24 inches wide and is equipped with a height-adjustable padded push handle, transit tie downs, and an under seat fabric storage compartment. Folded dimensions are 24 x 28 x 20 inches. The frame is available in a choice of black, pink, purple, or teal. Options include a ventilator system, a ventilator base only, and recline. SEAT: The seat shell c

Kidster Chair

The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s

Kidwalk Dynamic Mobility System

KidWalk Dynamic Mobility System is an upright wheelchair designed for children with cerebral palsy, spina bifida or muscular dystrophy. KidWalk encourages independent, self-initiated movement which helps in developing neural and motor skills, learning spatial relationships, and exploring the world. Quick exacting hip positioning. Single adjustment bilateral pelvic pads. Mid-wheel location for better control and smaller turning radius. Available in two sizes, easily accommodates functional chang

Kimba Neo Mobility Stroller With Leckkey Squiggles Seat

Kimba Neo Mobility Stroller with Leckey Squiggles Seat is a stroller and pediatric mobility system that focuses on function, comfort and support. The Kimba Neo is the third generation of adapted strollers specialized for children with special needs from Otto Back and comes with several improvements to its functionality. It now features wider grips for easier folding, improved seat adjustment ability and better impact dampening that absorbs shocks through the base, adding comfort for the user wh

Kimba Pediatric Tilt-In-Space Mobility System

The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated

Kimba Trs Twin Tandem & Kimba Trs Plus Twin Tandem

The Kimba TRS Twin Tandem is designed for use with children with mild to moderate disabilities and the Kimba TRS Plus Twin Tandem is designed for use with children with moderate to severe disabilities. This stroller offers dual reclining and tilt-in-space seating system frames on an in-line stroller frame. The seats can face forward or backward and individuals seats can be chosen to meet the user's specific needs. CAPACITY: 110 pounds.

Kittens Mittens

Kittens Mittens are children's fleece lined mittens for wheelchair users. These gloves may aid in providing protection against skin damage caused by starting, stopping and turning the wheelchair. It may also provide additional grip on the push rim (to prevent slipping); improved stopping and maneuverability. These gloves also serve to add comfort and/or warmth in cold or wet weather; protection against injury caused by repetitive impact.

Km-2020

KM-2020 is an Foldable Transport Wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury.

Km-3520

KM-3520 is a ultra lightweight wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury.

Km-5000-TP Reclining Transport Wheelchair

The KM-5000TP is a lightweight folding transport wheelchair with reclining back designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxW): 51 x (25, 27, 29 or 31) inches. The folding frame is constructed of 6061 T-6 aircraft-grade aluminum, and it is finished in black powder coat. Anti-tippers are standard. SEAT (WxD): (16, 18, 20 or 22) x 18 inches. Seat to floor height is 20 inches. The back height is 33 inches with an adjustable-height head pillow. The fol

Km-802F

KM-802F is a ultra lightweight wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury.

Km-9020L

KM-9020L is a ultra lightweight wheelchair that is designed for use by individuals with mobility disabilities or spinal cord injury.

Km-TV10B Companion Travel Wheelchair

The KM-TV10B is a lightweight folding transport wheelchair designed for use by adults with lower extremity or mobility disability or spinal cord injury. FRAME (HxW): 36.75 x 23 inches. The KM-TV10B has a 6061 T-6 aircraft-grade aluminum frame that folds in half using a quick-release lever. Folded dimensions (HxLxW) are 14 x 28 x (22.75 or 24.75) inches. The frame has a baked on enamel coating and is available in black or champagne. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 18 inches. S

Koala Miniflex

The Koala Miniflex is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 28-32 x 22 inches. Minimum turning radius is 36 inches. The Koala Miniflex has a ground clearance of 2.5 inches and independent suspension. The base frame is available in xtreme yellow or chili pepper red. An optional front bumper is available. CONTROLS: Right- or left-hand mounted joystick with Pilot+ Series programmable electro

Kool-Brella

Umbrella, nylon taffeta. Waterproof. Sun reflective due to aluminum-based top-side coating. This automatic opening umbrella has a wooden shaft and handle with a double canopy and Velcro closure straps on both canopies. DIMENSIONS: 48 inch arc. WEIGHT: Less than 2 pounds.

Kool-Stride Special Use Stroller

The Kool-Stride Special Use Stroller is a heavy-duty stroller designed for use by children and adults with lower extremity disabilities, mobility disabilities, or neurological disabilities. FRAME (HxLxW): The folding stroller is 39.5 x 54 x 29 inches in use and 7 x 41 x 21 inches when folded. SEAT: Zip Back Reclining Seat. WHEELS: 16-inch wheels in front; 20-inch wheels in rear. OPTIONS: Optional accessories include a Wind/Rain Cover; a mesh Bug Screen and Shade Cover; a tire pump that clips ont

Krypto

Krypto is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. A Growth Kit is available to allow the chair to be modified to accommodate the child's growth. FRAME: The frame is available in a mini version and a 3-inch longer standard version. Options include integrated, bolt-on, or quick-release push handles; anti-tippers; basketball roller; and black leather frame protectors. The frame is available in over

Kuschall Champion

The Kuschall Champion is a lightweight folding wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 inches (75-degree frame) or 33 inches (90-degree frame) x seat width plus 7.75 inches. The frame has a cantilever design and is available in glossy black, bronze black, cyber green, mystic purple, royal blue, royal red, sapphire blue, silver gray, and zantic yellow. SEAT (LxW): 13.5 to 18.5 x 13.5 to 17.5 inches. The floor-to-seat height a

Kuschall Compact

The Kuschall Compact is a lightweight folding wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 38 inches (70-degree frame) or 36.5 inches (80-degree frame) x seat width plus 6 inches. Standard features include hemi height standard or abduction frame with fully adjustable axle bracket, oval cross-brace tubes, and anti-rotation armrest brackets. The frame folds to 5 inches wide without rear wheels and 11 inches wide including them. Available

Kuschall Ultra-Light

The Kuschall Ultra-Light is a lightweight folding wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 38 inches (70-degree frame) or 36.5 inches (80-degree frame) x seat width plus 6 inches. The frame folds to 11 inches wide, or as little as 4 inches without the rear wheels. The chair has a 75- or 90- degree fixed front frame with fully adjustable rear axle bracket, anti-rotation armrest brackets, painted oval cross tubes, integrated caster f

Labac Mounting Kit (Model 3515)

Used for mounting a head operated actuator to the back of a Labac recliner. The mounting kit consists of a mounting bar with a stop clamp, a C-mounting rod, and a rod clamp to join the mounting rod to the mounting bar. Permits the actuator to be removed from the recliner, and returned to its original position without the need to readjust the mounting.

Landeez All-Terrain Wheelchair

The Landeez All-Terrain Wheelchair is a beach, snow, and sport wheelchair designed to enable individuals with mobility disabilities to enjoy outdoor recreation in a variety of environments. FRAME: Welded stainless steel frame with push handles disassembles without tools and folds for storage and transport. SEAT: Sling seat and back. The seat is 19 inches high. A seatbelt is included. UPHOLSTERY: Removable, washable nylon mesh upholstery. ARMRESTS: The padded teakwood armrests swivel up and out

Lap Hugger (Models 6515, 6515M, & 6515N)

The Lap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This soft lap cushion fits between the wheelchair user and the wheelchair frame and also provides arm support. The standard model have notches to fit around the armrest posts. Model 6515N is narrower for easier removal. Both styles have a wipe-clean vinyl cover. DIMENSIONS: Both styles fit 16- to 18-inch wide wheelchairs. The standard model is 4 inches thick. COLOR: Model 6515 is blue and model 6

Lap King Wheelchair Lap Desk

The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap

Lap Pal With Nylex Cover (Models Msc019038, Msc019037, Msc019032, Msc019035, Msc019030, & Msc019036)

The Lap Pal with Nylex Cover is a lapboard designed for use as a wandering patient system for wheelchair users with Alzheimer's disease or cognitive disabilties. This safety cushion fits snugly across the user's lap and securely against the wheelchair's arms, helping to keep the user from sliding down or getting out of the chair unassisted. The cushion is made of durable, lightweight polyurethane foam covered with Nylex fabric, and provides a resting place for user's arms. The cushion is flame-r

Lap Top Cushion (Series 307010 Through 307014 & 307030 Through 307034)

The Lap Top Cushion is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. Covered in durable, liquid-proof vinyl, these polyfoam-padded cushions serve as an armrest, a means of carrying personal items, a work surface, and a tool for promoting a more upright sitting posture. Available in three thicknesses, models are offered for wheelchairs with full- or desk-length arms and fit across the user's lap under the chair's armrests. The models fo

Lap Top Tray (Models 8220 & 8221)

The Lap Top Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or remain seated for long periods of time. These trays prevent forward leaning and provide elbow and arm support, while providing an activity surface. Model 8221 is padded for extra support and to reduce the risk of pressure sores. Model 8220 is clear to promote body awareness. Both models secure to the wheelchair with Velcro straps. DI

Lap Tray

The Lap Tray is designed for use by individuals who use wheelchairs. This waterproof tray has rounded corners, is melamine impregnated for durability, and sealed on both the top and bottom. A depressed edge prevents small objects from rolling off. DIMENSIONS: 23.5 x 22 inches with an abdominal cutout of 15.5 inches wide. COLOR: Woodgrain.

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lapboard for wheelchair to make it easier to carry items. Instructions are provided on how to properly measure a lapboard for use with a wheelchair. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .

Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair, can be used for activities or for arm support. Diagrams and suggested materials for trays; suggested variations include raised edging to keep articles from slipping off board, holes cut in board to stabilize dishes or other items. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneap

Laplander

The Laplander is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This portable desk has a solid work surface with rounded corners, a cut-out oval handle, and cloth elastic straps to hold materials in place. The base is a cushion made of breathable Neoprene. OPTIONS: Laplighter clip-on light with a flexible gooseneck and replacement straps. DIMENSIONS (WxDxH): 23 x 15.75 x 2.5 inches. COLOR: Natural cherry with a cream cushion or dark cherry with a black

Lapp Topper

The Lapp Topper is a lap tray designed to provide a work or feeding surface for individuals who use wheelchairs. This unit is a portable table that stays steady when placed on the lap. This tray is made of lightweight polystyrene-filledleatherette vinyl, allowing it to contour to the user’s lap. The cup holder and tray surface are made of polypropylene with a removable non-skid mat. The cup holder can be reversed for left- or right-handed use. DIMENSIONS (HxDxW): 16 x 23 x 5 inches.

Laptop Computer Tray

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a customized laptop computer tray for a student with disabilities. The adaptation mounts a laptop computer (with speech software) on a standard wheelchair tray so that the screen is in view while the computer is housed under the tray and the tray surface is left free. Hardware from a standard roll out "under the desk" keyboard shelf was modified to provide a platform for the laptop. Only the switch driving the software is exposed on the tr

Large And Tall Power Wheelchair Cover

The Large and Tall Power Wheelchair Cover is a wheelchair cover designed for use by tall individuals who use power wheelchairs. This waterproof cover is designed to fit wheelchairs with high seat backs, and it can fit small and medium chairs. It is available in light weight or heavy duty material. DIMENSIONS (HxLxW): 48 x 44 x 23 inches. The circumference is 124 inches. COLOR: Black

Large Cup Holder With Round Wheelchair Attachment

The Large Cupholder with Round Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for round tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair's metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t

Large Cupholder With Square Wheelchair Attachment

The Large Cupholder with Square Wheelchair Attachment is a wheelchair cup holder with attachment designed for use by individuals with lower extremity and mobility disabilities, spinal cord injury and others who use wheelchairs. Designed for square tube wheelchair frames, this device attaches to either side of the chair and secures to wheelchair metal frame. To open the attachment door, the user folds the door down to form the base of the cup holder, and adjusts the arms to accommodate 16-ounce t

Large Glove Box

The Large Glove Box is an under seat caddy for a wheelchair or scooter designed for use by individuals with mobility disabilities. Made of water-resistant nylon, this caddy attaches under the seats of most scooters and motorized wheelchairs with the included hook-and-loop straps. DIMENSIONS: 12 x 5 x 9 inches.

Large Or Small Book / Utility Bag

Vinyl or sailcloth book/utility bag with loops to slide over push handles. Bags are made to custom sizes, with large being over 12 inches wide by 12 inches high by 2 inches deep and small being under 12 by 12 by 2. Wide color range.

Large Oxbow Headrest (Model Lox100)

The Large Oxbow Headrest, model LOX100, is a headrest designed for use by use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side, and it is made of multi-layered foam with a zippered cover. DIMENSIONS (LxH): 16 x 8 inches.

Large Padded Headrest (Model Cph100)

The Large Padded Headrest, movel CPH100, s a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. This large multi-layered foam padded headrest provides comfort, support, and positioning. The headrest comes with a zippered Triptex cover. DIMENSIONS: 13 x 10 inches.

Large Wheelchair Headrest (Model 75909)

The Large Wheelchair Headrest, model 75909, is a headrest designed for use by individuals with lower extremity, mobility or severe physical disabilities, spinal cord injury and others who use wheelchairs. This headrest is designed to increase head support and comfort with minimal loss of range of vision to the user. It is made of highly tear-resistant polyurethane designed with relief contours for the user's ears. The width of the headrest is adjustable. It has a sturdy, full length metal insert

Larger Crutch Bag For Wheelchair

The Larger Crutch Bag for Wheelchair is designed for use by people with lower extremity, walking or mobility disabilities who use crutches and a wheelchair. This bag, which is available made of nylon, sunbrella, or cordura, provides the means for transport a pair of crutches while seated in a wheelchair. The bag attaches to the back of a wheelchair and fits one pair of crutches in an upright position. It has a flap with a Velcro closure and a side pockets that are large enough to fit magazines o

Lateral Facial Component (Model Lfc-1)

The Lateral Facial Component model LFC-1 is an accessory for the SOFT-1 or SOFT-2 headrest systems (see separate entries) that provides additional support to persons with severe ATNR or difficulty aligning in midline position. The support consists of two independently adjustable pads placed in front of the user's ears and extending from approximately the cheekbone to the crest of the head. The user's hearing or visual field is only minimally interfered by the device. The LFC-1 may be ordered thr

Lateral Supports

Lateral Supports are lateral trunk supports designed for use by individuals with mobility or neurological disabilities or spinal cord injury. All pad sizes are available in stationary or swing out style. SIZES: Small, medium, large, or extra large. DIMENSIONS (HxD): 3 x 3 inches (small), 3 x 4 inches (medium), 4.5 x 4.5 inches (large), 4 x 6 inches (extra large).

Laundry Trolly

The Laundry trolley is designed for individuals who are unable to bend down to pick up their laundry basket or who need a laundry basket with wheels in order to carry it to the washing machine.

Lautzenhiser Drive Control

The Lautzenhiser Drive Control is a powered wheelchair controller designed for use by individuals with spinal cord injury or severe phyical disabilities. This fully-proportional alternative input device for powered wheelchairs features a miniature tilt-sensor that can be worn on the head, hand, finger, or foot providing precise command wheelchair and seat functions. Features include null-width (neutral zone) adjustment, adjustable on-delay timer (controls the time until the sensor is activated a

Le Journeyman

The LE Journeyman is a powered wheelchair alternative for indoor and all-terrain outdoor use by people who have mobility disabilities or spinal cord injury. It is designed for all weather use and can be used in up to 10 inches of water. FRAME (LxW): 25-36 x 42-48 inches. Each Journeyman is custom made to the specifications of the user. CONTROLS: The Journeyman utilizes a 200-amp controller with a T-shaped tiller for one- or two-handed steering. AWD: The Journeyman has an independent 1-horsepower

Leg Contracture Pad (Models 703080 &703082)

The Leg Contracture Pad is a legrest panel designed for use by individuals who use wheelchairs and whose legs are in flexion contracture. This unit fits between the legrests between the seat and the footplates and has a firm foam-padded plywood base covered in wipe-clean vinyl. DIMENSIONS: Model 703080 feets 16-inch wheelchairs and model 703082 fits 18-inch wheelchairs.

Leg Guard (Model 59)

The Leg Guard, model 59, is a legrest strap designed to prevent the wheelchairuser's feet from slipping back off the footrests. This webbing strap fastens to the legrests with Velcro fasteners. DIMENSIONS: 2 inches wide.

Leg Hugger (Model 6355)

The Leg Hugger, model 6350, is a legrest panel for people with lower extremity or mobility disability or spinal cord injury and others who use wheelchairs designed to prevent the wheelchair user's feet from sliding off foot plates between the legrests. This panel lies flat against the leg bars to allow full use of the foot plates and attaches to wheelchairs with quick-release straps. Cushioned with foam padding, the panel is covered in wipe-clean vinyl. DIMENSIONS (WxH): 15.5 x 9 inches. Fits ch

Leg Rest With Seat Mounting Brackets

Custom size pad and pair of custom angled Kydex or aluminum brackets which mount to front edge of solid seat. Brackets may be hinged to provide adjustability on wheelchair with elevating legrests.

Leg Support For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to use a wheelchair. The legrest extends straight out from the wheelchair seat, supporting the legs while leaving the foot free. A support frame was created from square steel tubing and mounted on the right front frame of the chair and under the seat. A horizontal piece comes out from the wheelchair frame and attaches to a vertical piece that supports the horizontal leg support. The support itself is made from half a section o

Legend Xl

The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-w

Legrest Pad (Models 440P1 & 440P2)

The Legrest Pad is an injection molded, steel reinforced calf trough with foam padding. It has an elliptical shape, curved to fit the natural contour of the leg. It attaches to the footrest support with fitted clamps. Adapter plates are available for some makes of wheelchairs. These can be used with Side Thoracic Support hardware.

Legrest Panel (Model S064)

The Legrest Panel, model S064, is designed for use by individuals who use wheelchairs. This fabric panel attaches to the footrest posts with adjustable Velcro straps and cradles the back of the legs with its sling-like design.

Lestronic Ii Battery Charger (Model 6815)

The Lestronic II Battery charger, model 6815, is a battery charger designed for use with wheelchairs and scooters. This 12-volt charger is a ferroresonant battery charger and has a patented electronic timer. The charger is fully automatic, turning on automatically when plugged in and shutting off when batteries are fully charged. The charger adds to range with each charge and to total battery life. This charger is designed for use with wet or flooded batteries (water required to be added to the

Lestronic Ii Dual Mode (Models 17750, 18330, & 18350)

The Lestronic II Dual mode, models 17750, 18330, and 18350 are battery chargers designed for use with scooters and powered wheelchairs. This fully-automatic charger is electronically controlled and has two modes. One mode charges conventional liquid electrolyte batteries, other charges gel-cell or other sealed cell batteries. The direct current (DC) output is 24 volts, 8 amps, tapering to 3 amps. DIMENSIONS (HxWxL): 8 3/16 x 8 11/16 x 6 7/16 inches long. WEIGHT: 16 pounds.

Levenger Lap Desk

The Levenger Lap Desk is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This wooden desk is designed to rest on the arms of a chair to keep weight off the user's lap. This kidney-bean shaped desk is equipped with elastic straps to hold books and materials in place; included on the strap is a pen holder loop. OPTIONS: Transparent writing pad and clip-on Laplighter light. DIMENSIONS (WxHxD): 32.5 x 16 x 0.25 inches. COLOR: Natural cherry or dark cherry.

Leveraged Freedom Chair (Lfc)

---- PROTOTYPE --------- PURPOSE: To create a wheelchair prototype to allow individuals with mobility in third-world countries greater mobility in and outdoors providing personal freedom. Amos Winter, a PhD candidate in mechanical engineering, along with a team of undergraduates at MIT and international design collaborators designed the Leveraged Freedom Chair (LFC). The LFC performs like a combination of a desk chair and a mountain bike "something you can comfortably sit in all day and maneuve

Levo Active-Easy (Lae)

The Levo Active-Easy is a manual stand up wheelchair designed for use by individuals with mobility disabilities. FRAME: Manual stand-up frame. SEAT: Height- and angle-adjustable seat with a folding angle-adjustable backrest. UPHOLSTERY: Choice of black, violet, or turquoise upholstery. STAND UP MECHANISM: Gas spring supported. CASTERS: Front quick-release casters in violet, turquoise, or black. WHEELS: Quick-release rear wheels in violet, black, and turquoise. The wheel position is adjustable. F

Levo Compact (Lc)

The Levo Compact is a stand up wheelchair designed for use by individuals with mobility disabilities. FRAME: Stand-up folding or fixed frame. Anti-tip rollers are optional. SEAT: Choice of seat widths and depths. The fixed frame model has a folding backrest. Side Guards and a backrest extension are optional. CUSHION: Optional. STAND UP MECHANISM: Powered stand-up mechanism with push-button control. A control switch extension is optional. CASTERS: Front casters. WHEELS: Rear push wheels with hand

Levo Kid

The LEVO Kid is a manual stand up wheelchair designed for use by children ages 18 months through 10 years of age with mobility disabilities. FRAME (WxLxH): Stand up frame in a standard choice of yellow or red. Additional colors are available as extra cost options, as are anti-tips and stroller handles. The chair is 19.3 or 21.2 x 24 x 21.6 inches. SEAT (WxHxD): 11.8 or 13.8 x 13 or 17.3 inches x 9.5 to 11.8 inches. The seat can accommodate a variety of seating systems and the seat depth is adjus

Lexan Half Lap Tray, Left (Model 16C012-1L) & Lexan Half Lap Tray, Right (Model 16C012-1R)

The Lexan Half Lap Tray is a lap tray is designed for use by individuals who use wheelchairs. This tray has an epoxy-coated-steel slide- on mounting bracket. A hinged system allows the clear, see-through tray section to fold completely over thus leveling it with the side of the wheelchair when not in use. No tools are required for attachment. Model 16C012-1R is for right-handed use and model 16C012-1L is for left-handed use. DIMENSIONS (WxL): 10 x 20 inches.

Libre

The Libre is a manual wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wide in one inch incr

Libre Tilt

The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi

Lifestand Ls

LifeStand LS is a stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a manually propelled wheelchair with a manually powered standing mechanism. The user is lifted to standing position by propelling the chair forward, with assistance from a hydraulic cylinder system that is adjusted to the individual's weight. A power assisted stand unit is also available as an option. FRAME (LxWxH [sitting]): 96-108 x 5

Lifestand Lsa Helium

The LifeStand LSA Helium is a stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is a manually propelled, manual standing wheelchair. The user lifts him- or herself to a standing position by grabbing standing mechanism handles and using the same motion that propels the chair forward, with assistance from a hydraulic cylinder system which is adjusted to the individual's weight. FRAME (HxLxW sitting): 78 or 9

Lifestand Lsc

The LifeStand Compact (LSC) is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (HxLxW sitting): 100 or 110 x 98 or 110 x 67 centimeters. Rigid frame with push handles

Lifestand Lse

The LifeStand LSE is a stand up wheelchair designed for use by children and adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This mobile standing frame consists of a manually propelled wheelchair with a power stand-up unit. When the chair is in standing position, the user's chest, knees, and ankles are supported in a straight line. FRAME (LxWxH sitting): 109 x 59, 63, 67 or 72 x 86, 98 or 100 centimeters. The length when standing is 104 centimeters. Anti

Lifestyle Mini Traveler Supreme (Model Mt-100)

The Lifestyle Mini Traveler Supreme, model MT-100, is a lightweight three-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 35 x 21 1/8 inches. The scooter disassembles for transport or storage. The turning radius is 33 inches. Available colors are red and blue. SEAT (WxD): 16 x 16 inches. The swivel seat is height adjustable and folds down. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. WHEELS: 7-inch front and rear foam

Lifestyle Transfer Board (Models Rtl6044 & Rtl6045)

The Lifestyle Transfer Board, models RTL6044 and RTL6045, is a transfer board designed for use by individuals with balance, lower extremity or mobility disabilities or spinal cord injury. Intended for use in transfers to and from wheelchairs, this board features two horizontal cut-out handles for gripping and carrying. It has rounded corners with tapered ends. The board is made of Baltic birch with a clear lacquer finish. DIMENSIONS: Available in lengths of 24 and 30 inches. CAPACITY: 250 pounds

Lift-Off Lap Cushion (Model 307050)

The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p

Liftkar Pt-A (Model 045-722)

The LIFTKAR PT-A, model 045-722, is a powered stair transport for wheelchair designed for indoor or outdoor use to allow an attendant to easily move a manual wheelchair, whether occupied or unoccupied, up and down most staircases. It is intended for use with an individual with lower extremity or mobility disabilities or spinal cord injury. The device fits most wheelchairs, including sport and children’s wheelchairs. The device consists of a base with two wheels with fittings on which to secure a

Liftkar Pt-S (Model 045-726)

The LIFTKAR PT-S, model 045-726, is a powered stair transport chair and emergency evacuation carrier designed for indoor or outdoor use to allow an attendant to easily move an individual with lower extremity or mobility disabilities or spinal cord injury up and down most staircases. The device consists of a base with two wheels and two casters with a seat with backrest and armrests and a vertical post extending from the base unit with the control mechanisms on the upright side topped with a U-sh

Liftkar Pt-U (Model 045-728)

The LIFTKAR PT-U, model 045-728, is a powered stair transport for wheelchair designed for indoor or outdoor use to allow an attendant to easily move a manual wheelchair, whether occupied or unoccupied, up and down most staircases. It is intended for use with an individual with lower extremity or mobility disabilities or spinal cord injury. The device fits most wheelchairs, including sport and children’s wheelchairs. The device consists of a base with two wheels and a platform on each side onto w

Light And Go Mobility Light

Light and Go Mobility Light is a wheelchair accessory designed for any aged individual who uses a wheelchair, walker, or rollator. It assists individuals who have difficulty seeing while walking with their walker or rollator or while using their wheelchair. It comes with three bright, long-life LEDs, with two standard AA batteries and a flashlight that can be attached to the wheelchair. This product allows for hands-free use with wheelchairs, walkers, and rollators. It also comes with a protecti

Lightweight Plastic Transfer Board

The Lightweight Plastic Transfer Board is designed to aid individuals who use wheelchairs in transferring to and from the wheelchair. Molded of high-impact plastic with reinforcement ribs for maximum stength, this board provides a rigid transfer surface between any two level surfaces. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 220 pounds.

Lightweight Scooter (Models W4597 & W4789)

The Lightweight Scooters are gym scooters are scooter boards designed for use by children with mobility disabilities. All models are intended for indoor use and have non-marring swivel wheels. Models W4789 and W4597 are made of wood and have a center hole and a vinyl bumper on all edges. DIMENSIONS: 12 x 12 inches (W4789) or 16 x 16 inches (W4597). COLOR: Natural wood.

Lightweight Transport Chair

The Lightweight Transport Chair is an attendant-propelled transport wheelchair designed for use by individuals with mobility or lower extremity disabilities. FRAME(HxWxD): Open, the chair is 39 x 21 x 35 inches and folded it is 29 x 13 x 28 inches. This wheelchair has a lightweight folding aluminum frame in a choice of titanium or blue. SEAT(WxDxH): 16 x 15.5 x 19.5 inches. The back height is 19 inches. ARMRESTS: Included. BRAKES: Dual wheel locks. WHEELS: Four caster wheels. FOOTRESTS: Include

Lightweight Wheelchair (Models 1820 & 1821)

The Lightweight Wheelchair is a lightweight wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding crossbrace frame. SEAT (LxW): 16 x 16 inches (model 1820) or 16 x 18 inches (model 1821). The seat-to- floor height is 19.5 inches, and the padded backrest is height adjustable from 15 to 19 inches. UPHOLSTERY: Lightweight nylon upholstered seat. ARMRESTS: Included. FOOTRESTS: Optional swingaway footrests (model 1822) are available. CAPACITY: 300 pounds. WEIGHT: 32 po

Linear Lap Desk With Led Light

The Linear Lap Desk with LED Light is a lap tray designed for use by individuals with lower extremity or mobility disabilities and others who use wheelchairs. This oval lap desk is lightweight with rounded, smooth edges. It has a laminated plywood surface mounted on an oval wedge-shaped cushion filled with a soft foam pillow. The laminated surface is glare-free to help reduce eye strain. Other features include an attached gooseneck LED light. The cushion conforms to any lap and adjusts from fl

Lisa Pediatric Postural Mobility System (Models 3207 & 3208)

The Lisa Pediatric Postural Mobility System is a stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Model 3207 is 13 x 41 x 11 inches when folded; model 3208 is 17 x 42 x 16 inches when folded. The frame is Saturn Blue Metallic. SEAT (LxW): Model 3207 is 10, 12, or 14 x 12 inches without upholstery and model 3208 is 12, 14, or 16 x 14 inches without upholstery. Upholstery adds two inches to width. The seat width may be reduced using

Lite Rider (Models Lr12 & Lr14)

Lite Rider is a lightweight child's wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36.5 x 43 x 19.5 inches for model LR12 or 37 x 44 x 20.5 inches for model LR14 inches. Folded dimensions are 14.5 x 43 x 13.5 inches (model LR12) or 14.5 x 44 x 12 inches (model LR14) inches. The frame has a gray hammer-tone finish. Rear legs, caster stems, fabric tubes, and axle brackets are made of aluminum. SEAT (LxW

Lite Transfer Board (Model Bk6466)

The Lite Transfer Board, model 6466, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. Made of birch plywood with a lacquer finish, this board has tapered ends and rounded edges for easy sliding. DIMENSIONS (LxWxD): 24 x 8 x .05 inches. WEIGHT: 37 ounces.

Little Dipper

The Little Dipper is a child's wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities, or spinal cord injury. FRAME: No camber frame. Options include a short frame or 3-inch longer frame. Options include integrated or bolt-on push handles; anti-tippers; a basketball roller; and black leather frame protectors. The frame is available in a choice of more than 20 solid colors or with anodized clouds or custom graphics. SEAT: Choice of 8, 9, 10, 11, 12,

Lma Heavy Duty Transport Chair (Model Lma-102)

The LMA Heavy Duty Transport Chair, model LMA-102, is a transport wheelchair designed for use by individuals with arthritis or mobility or lower extremity disabilities. FRAME: Overall width is 26 inches or 28 inches for the super heavy-duty model. SEAT (LxW): 19 x 20 inches for the standard model or 19 x 22 for the super heavy-duty model. Seat height from the floor is 19 inches. WHEELS: Solid front and rear wheels with heavy duty forks. 12-inch rear wheels are standard; 24-inch rear wheels are a

Lma Mini Traveler Sporty (Model Mt-300)

The LMA Mini Traveler Sporty, model MT-300, is a scooter designed for use by individuals with arthritis or neurological, lower extremity, or mobility disabilities. FRAME (LxW): 35 x 21 1/8 inches. The turning radius is 33 inches. A basket is included. The frame is available in red, blue, or yellow. SEAT (LxW): 16 x 16 inches. Seat height from ground is 21 inches. BRAKES: Electric braking system. WHEELS: 7-inch foam filled tires. POWER: Includes battery and onboard battery charger. SPEEDS: 3.5 mi

Lma Mini Traveler Supreme 2 (Model Mt-120)

The LMA Mini Traveler Supreme 2, model MT-120, is a scooter designed for use by individuals with arthritis or lower extremity or mobility disabilities. FRAME: One-piece red or yellow frame with expandable leg room. CONTROLS: Fully programmable controller. RWD: Rear-wheel drive. UPHOLSTERY: Black. ARMRESTS: Included. WHEELS: Three wheels with flat-free tires. POWER: Uses battery (included) with onboard charger. SPEEDS: 4 miles per hour maximum speed. CAPACITY: 250 pounds.

Long Board Crawler (Model W6047)

The Long Board Crawler, model W6047, is a scooter board designed for use with children with mobility disabilities. This hardwood board has heavy-duty no-mar casters and can accommodate two to three seated riders for cooperative activities. DIMENSIONS (HxLxW): 3 x 35 x 11.5 inches. COLOR: Natural wood.

Low Lapboard.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides a work surface at a convenient height for food preparation. Can also be used to carry items from one place to another. Directions, diagram and materials for simple wooden tray that fits over the skirt guards of a wheelchair armrest. Edging along the front of the board prevents items from rolling off. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Ins

Low Shear Power Recliner

Low shear power recliner for Invacare Arrow recliner frame or sectional frame, or Everest and Jennings recliner frame -47 or -49 and standard Marathon sectional back wheelchairs. High quad seating system replaces standard seat assembly. Comes assembled, includes reclining frame, rigid back, rigid seat, standard headrest, quick release reclining arm hardware, arm and leg troughs, underseat or back module mount, and a toggle switch to control the system. Back height of 16 inches to 25 inches in on

Lower Extremity Supports, Solid Calf Panel, Calf Troughs, & Calf Cuffs

Legrests with calf supports. Model 108-3000 is solid calf panel with fixed or swing away brackets, 1 inch drop hooks, 30 degree clamp, all sizes. Model 108-4000 is molded calf trough which mounts to elevating legrests, small has 3 inch circumference, large for 5 inch circumference leg, specify length. Model 108-6000 is molded calf trough which mounts to solid wheelchair seat, small for 3 inch circumference leg, large for 5 inch circumference, specify length. Also available: calf cuffs to mount t

Lt-700T

LT-700T is a foldable, standard Lightweight Wheelchair designed for use by individuals with mobility disabilities or spinal cord injury.

Lt-800T Lightweight Wheelchair

The LT-800T Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 36 x 31 x (22 or 24) inches. Folding high strength aluminum frame. Folded width is 11 inches. Frame color is silver vein. Anti-tippers are optional. SEAT (DxW): 16 x (16 or 18) inches. Seat to floor height is 19 inches. Backrest is foldable, and back height is 16 inches. Options include seat belt, carrying

Lt-950 Ultra Lightweight Wheelchair

The LT-950 Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxW): 37 x 26 inches. Folding frame is made of durable aluminum. Available in black. Anti-Tippers are optional. SEAT (WxD): 18 x 15 inches. Seat to floor height is 19.5 inches. Backrest height is 19 inches, and the backrest folds down. Foldable, adjustable headrest, carry pouch and a seat belt are optional. CU

LT-980 Ultra Lightweight Wheelchair

The LT-980 Ultra Lightweight Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 38 x 28 x (26 or 28) inches. Frame is made of durable aluminum and folds for storage. Folded dimensions are (HxW): 29 x 13 inches. Available in black or merlot mica. Anti-tippers optional. SEAT (WxD): (18 or 20) x 16 inches. Seat to floor height can be adjusted to 18 or 19 inches. Backrest height is 19 inche

Lt-K5 Ultra Lightweight Wheelchair

The LT-K5 Ultra Lightweight Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME (HxLxW): 34 x 38 x (24.5 or 26.5) inches. The folding frame is constructed from high-strength aluminum. Folded width is 14 inches. It has a height-adjustable axle that allows for various seat heights. Color is black. Anti-tippers are optional. SEAT (WxD): (16 or 18) x 17 inches. The seat to floor height is adju

Lucca

The Lucca is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: The frame is composed of two halves, front and back, which are attached with screws. As the child grows, these two halves can be repositioned to increase the length of the frame from 30 to 38 centimeters in 2-centimeter increments. The side panel includes a clothing protector. SEAT: Back height is adjustable from 25 to 40 centimeters in 1.5 centimeter increme

Luggage Rack (Model 97)

The Luggage Rack, model 97, is designed for use with wheelchairs. This rack mounts to the wheelchair step tubes and extends back to support luggage.

Luggie

The Luggie is a mobility scooter designed for use by individuals with mobility disabilities. FRAME (LxWxH): 39 x 18 x 33.5 inches. The wheelbase is 29 inches. The deck height is 5 inches. The ground clearance is 2.5 inches, and the turning radius is 35.5 inches. Folded, the unit is 25.4 inches high; with the seat and tiller folded, the scooter is 24 inches high. This scooter has an aluminum folding frame and can be assembled and disassembled without tools. The scooter is available in red, blue,

Luv Base (Model Luv-1)

Manual mobility base. Seat pan will accept a variety of seating systems. 14 by 14 inch seat pan has adjustable height of 15.5 to 19.5 inches from the floor. Gas cylinder under pan provides smooth tilt in space adjustament. Tubular steel frame. 12 inch rear wheels, 8 inch front casters. Overall length 34 inches. Overall width 25 inches. Weight of base 35 pounds. Maximum weight of user 180 pounds. Available in six colors.

M.a.c. (Multi-Adjustable Chair)

The M.A.C. (Multi-Adjustable Chair) is a tilt-in-space wheelchair designed for use by individuals with mobility disabilities. FRAME: The tubular steel frame collapses for transport. The frame is available in a choice of narrow (14 inches wide), standard (16 inches wide), or wide configurations (19 inches wide), and is offered in a choice of of 10 standard colors; one specialty color and custom colors are available at an extra cost. Push handles are standard. An expandable frame is optional. SEAT

Maclaren Major 2000

The Maclaren Major 2000 is a stroller designed for use with children with mobility disabilities. FRAME: Folding square-section aluminum frame with square grip handles. The frame folds to 46 x 9.75 x 8.25 inches. The handle to ground height is 41 inches. SEAT (WxD): 15.5 x 11.5 inches. The seat back is 22 inches high. The seat to floor height is 23 inches in the front and 18 inches in the back, The standard seat is a sling seat with harness. Options include a removable, washable padded seat; a ch

Magic Arm

The Magic Arm is a mounting attachment for wheelchairs for positioning cameras, joysticks, or other adaptive equipment. This flexible arm has three joints, a 90 degree pivoting end, a 360 degree rotating end, and a 360 degree rotating elbow. Both ends have studs that are tapped and fit any standard 5/8 inch socket. Includes a flash shoe and a camera mounting bracket. This device is designed for use with the Beneficial Designs Super Clamp (see separate entry). DIMENSIONS: Extended length is 19.7

Magic Carpet

---- PROTOTYPE --------- PURPOSE: To design a prototype of a moving platform for pre-school aged children with mobility disabilities and/or lower limb disabilities to move around and navigate their environment. Created by designers at the Polytechnic University, Magic Carpet allows young children with mobility or lower limb disabilities to experience moving independently while learning and practicing the skills necessary for to maneuver a power wheelchair. The Magic Carpet consists of a carpeted

Magicwheels

MAGICWHEELS are two-gear wheelchair wheels designed for use by individuals with mobility disabilities or spinal cord injury. Low gear requires half the effort of standard pushing for climbing hills, ramps, curb cuts, or door thresholds. When going downhill, only half the force is needed for stopping. The user engages low gear with a click of the hub. When not in low gear, the user applies the same level of force as with a standard wheelchair wheel. In low gear, an automatic hill-holder prevents

Mako Performance

The Mako Performance is an elastomer replacement wheelchair tire designed for use by wheelchair users. These rolling resistance tires are made with High Round Elastomer technology and are comparable to pneumatic racing tires. DIMENSIONS: 24 x 1 inches. This tire fits any manufacturer's wheel requiring a 24 x 1 or 24 x 1.25 inch tire whose rim is 15 to 17 millimeters (mm) wide and at least 7 mm deep. It will fit 540 mm rims as well. COLORS: Green, black, blue, red, or yellow.

Marathon 24 & Marathon 8

Airless wheelchair tires. One piece, snap on, lightweight Endurothane II construction to replace conventional rubber tires. Maintenance free. Lifetime guarantee against flats, blowouts and pressure loss. AA24100 fits most major brands of wheelchair tires 24 inches diameter. AA8101 fits most shallow 8 by 1 inch rims. AA8102 fits molded plastic and most other deep cavity 8 by 1 inch caster rims.

Mart Cart Deluxe Edition (Models 02002 De & Del)

The Mart Cart Deluxe Edition, models 02002 DE and DEL, is a shopping cart scooter designed for use by individuals with mobility disabilities. This scooter can negotiate 25-inch aisles in retail stores. FRAME: 1.25 inch steel frame with basket bra, folding produce tray, and deluxe trim. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel drive with front hub motor. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12-volt, 70-amp battery. CAPACITY: 700

Mart Cart E-Se & E-Sel

Mart Cart E-SE and E-SEL are shopping cart scooters designed for use by individuals with mobility disabilities. This scooter has a large shopping basket and can negotiate 25-inch aisles. FRAME: 1.25-inch steel frame. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel hub drive. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12- volt, 70-amp battery. CAPACITY: 700 pounds (550 pounds for rider plus 150 pounds basket capacity).

Mart Cart Shopper's Aid

The Mart Cart Shopper's Aid is a transport wheelchair designed for use by shoppers with mobility disabilities. This lightweight chair is designed to fit behind a standard shopping cart (not included), with space to seat passengers of all sizes, including one or two children or a single adult. Its universal mounting system attaches to the chair to a shopping cart by tightening a few bolts. FRAME: Available frame colors are red, blue, green, gray, or chrome. A platform under the seat provides addi

Mart Cart Xti 24 Personal Shopper (Model 280-2534)

The Mart Cart XTi 24 Personal Shopper, model 280-2534, is a shopping cart scooter designed for use by individuals with mobility disabilities. This 3-wheeled scooter is designed for indoor or outdoor use on hard surfaces, including ramps with up to a three-degree incline. FRAME: Includes front anti-tip casters. CONTROLS: Available with thumb-activated wig-wag or ergonomic dual throttle controls. FWD: Front wheel drive with XTi hub motor. SEAT: Adjustable position sliding seat. BRAKES: Friction di

Mart Cart Xti-12

Mart Cart XTi-12 is a shopping cart scooter designed for use by shoppers with mobility disabilities. This electric shopping cart turns within the diameter of its rear axle, allowing a 180-degree turn in narrow store aisles. The scooter is equipped with a basket, horn, and reverse warning alarm. Signage includes "For Our Valued Customers" and "No Children in Basket." Operating instruction decals are available in Spanish, Portuguese, or French. FRAME (HxLxW): 37 x 55 x 25 inches. This scooter has

Mart Cart Xti24 Industrial

The Mart Cart XTi 24 Industrial is a scooter designed for use in commercial environments by individuals with mobility disabilities. This scooter is designed for indoor or outdoor use on hard surfaces, and can go up and down ramps. Features include a basket, anti-tip swivel casters, double insulated wiring harness, a horn, and a reverse warning alarm. FRAME (HxLxW): 37 x 55 x 25 inches. Welded chassis with rear wraparound steel bumper and fiberglass body with bright finish. The scooter comes in a

Massaging Pillow (Models 3128 & 3128A)

The Massaging Pillow, models 3128 and 3128A, is a vibrating pillow designed for use by individuals with upper extremity or severe physical disabilities.This pillow was designed to be used to help promote proper posture and provide back and neck support for activities such as activating a capability switch. It has low and high vibrating modes, and it can be used while in a wheelchair, office or automobile. POWER: Requires 2 D batteries. DIMENSIONS (DxLxW): 5 x 13 x 13 inches (model 3128) or 4 x 1

Maxidy Arm Rest Pads

Maxidy Arm Rest Pads, desk length and full length, are designed for use with all wheelchairs. Both arm rests are constructed of long-lasting, durable urethane foam. Maxidy arm cusions offer a universal fit on all wheelchair models and are guaranteed to be rip-free, soft and comfortable. They are easily installed on wheelchair arms and all necessary hardware is included.

Maxidy Calf Rests

Maxidy Calf Rests are legrest pads designed for use on wheelchairs. They are constructed of long-lasting, durable urethane foam and will fit on all types and models of wheelchairs. Maxidy Calf Rests are guaranteed to be rip-free, soft and comfortable. They are easily installed and all necessary hardware is included.

Mc5

MC5 are suspension caster forks designed for use on lightweight low-profile sports wheelchairs. Available in a choice of light-, standard-, or heavy-duty models these aircraft aluminum forks retrofit most sports chairs and feature polymer shock absorbers that reduce the effect of vibration on the wheelchair user. They also reduce the chance of the user being pitched from the chair when the front wheels encounter obstacles; each wheel travels independently over the obstacle. These forks offer a c

Mccain Wheelchair Roller (Models Br20)

The McCain Wheelchair Roller is a wheelchair exercise roller designed for use by individuals who use wheelchairs. The unit consists of a ramp with non-slip tread attached to a set of rollers. The user wheels any manual wheelchair up the ramp, parks with the rear drive wheels on the rollers, and secures the chair. The user can then wheel in place to achieve a workout. This device is equipped with an eight-pound flywheel for added momentum. OPTIONS: Resistance unit. DIMENSIONS: The unit has 4.5 in

Medi Chair (Models A & B)

Geriatric or transport chair, folds down to stretcher. Chrome-plated steel frame, vinyl upholstered, solid high back, seat and one piece legrest. One piece footboard, folds flat in stretcher mode. Optional separate elevating legrest. Full length fixed arms, adjustable back angle. Two models: front 8-inch casters and rear 8-inch wheels, or front 8-inch casters and rear 24-inch wheels with handrims. Expanding lever base utilizes patient weight to operate chair, extends wheelbase for stretcher mode

Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)

The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:

Medline Excel Pediatric Wheelchair (Model Mds806210Ped)

The Medline Excel Pediatric Wheelchair, model MDS806210PED, is a child's manual wheelchair designed for use by children with mobility disabilities. FRAME: Standard dual axle frame with cast aluminum seat cradles and threaded seat screw inserts. SEAT: Available in 12-inch or 14-inch widths. Seat height can be adjusted to hemi level. UPHOLSTERY: Nylon upholstery; custom upholstery is available. ARMRESTS: Swing-back arms with arm release and padded, upholstered armrests. WHEELS: Front and rear whee

Medline Reclining Back Cushion (Mscbr16, Mscbr18, & Mscbr20)

The Medline Reclining Back Cushion is a foam wheelchair back support cushion designed for use by individuals with mobility disabilities. A replacement for the standard wheelchair sling back, this cushion creates a fixed 10-degree angle of recline. The back support has two layers of high-density foam with a built-in rigid inset and a ShearX all-way stretch cover. The cover reduces skin shear and is antimicrobial and fluid-proof. The back support fits 16-inch wheelchairs (model MSCBR16), 18-inch w

Melrose Performance Polymer

Melrose Performance Polymers are shock absorption materials for wheelchair casters designed for use in customizing Frog Legs suspension caster forks (see separate entry). Frog Legs caster forks replace a wheelchair's existing caster forks with shock absorbing hinges that use Melrose Performance Polymers to absorb the impacts that a wheelchair's casters encounter. The polymers are cylindrical, and they fit in the Frogs Legs fork where they absorb vibration to reduce shaking and bouncing in the fr

Melrose Rhino Custom Rugby Wheelchair

The Melrose Rhino Custom Rugby Wheelchair is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This rugby wheelchair is fabricated after consultation with the athlete or user, and is manufactured to comply with rules of the International Wheelchair Rugby Federation (IWRF). Chairs can be built that are primarily offensive or defensive. Pickbars mounted to the front enable striking and holding opposing wheelchairs. To make it ha

Melrose Wheelbag Usa (Model 45182)

The Melrose Wheel Bag USA, model 45182, is a bag for wheelchair wheels for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who user a wheelchair. The bag holds up to four spare wheels in a protective padded compartments. Wheels are protected from scratches and marks. The bag keeps a person's wheels together so if that person is traveling with a team or a group of wheelchair users, his or her wheels are kept separate from other wheels. The b

Melrose Wolverine Custom Lacrosse Wheelchair

The Melrose Wolverine Custom Lacrosse Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Each custom-built wheelchair is fabricated after consultation with the athlete or user, and it is built to comply with international rules of WLAX (Wheelchair Lacrosse). Features that can help in the game include wings mounted to the front that sit flush to the rear wheels to fend off opposing wheelchairs, fixed camber betwee

Mercury Airchair

The Mercury AirChair is an emergency evacuation carrier and transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, or neurological disabilities, or spinal cord injury. FRAME: Made of high strength aluminum alloy, this folding frame is available in three widths - 14, 15 and 16 inches. Overall height is 34.1 inches for all width. Folded dimensions (HxWxD): 28.3 x 14.7 x 7.5 inches (14-inch width); 28.3 x 15.7 x 7.5 inches (15-inch width); 28.3 x

Merlexi Craft Liberty I

Merlexi Craft Liberty I is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME:It has a molded synthetic frame for light weight. The folding frame is made of molded reinforced polypropylene and is 13.5 inches wide when folded with wheels. Color options include red, blue, green, and black. The ergonomically designed full control handle is molded into the chair side. SEAT (LxW): 17 to 18 x 16 to 1

Merlexi Craft Liberty Ii

Merlexi Craft Liberty II is a lightweight manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The chair has a reinforced polypropylene body and the frame folds to 13 inches wide with wheels. An ergonomically-designed full control handle is molded into the chair side. Color options include red, blue, green, and black. SEAT (LxW): 17 to 18 x 16 to 18 inches. The chair has a solid contoured FormFold seat with f

Merry Motivator

The Merry Motivator is a height-adjustable geriatric chair designed for use by individuals with mobility, walking, or balance disabilities. This chair is designed to enable the user to remain seated while propelling the chair with his/her feet. The design keeps the coccyx off the seat, reducing the risk of pressure build-up and ulcers. Standard features include a low pressure seat with pneumatic lift for height adjustments, a high back, washable upholstery, side pouch, a non-tip U-shaped base, f

Mesh-Back Wheelchair Glove Series (Model Br607)

The Mesh-back Wheelchair Glove Series, model BR607, by Hatch are a line of all-purpose push gloves for manual wheelchair users. The gloves have half sleeves for the fingers and thumbs, and are made of leather with crocheted mesh backs. A velcro closure is featured on the backs of the wrists. COLOR: Available in 8 assorted colors.

Metatarsal Cushion

This Metatarsal cushion is meant to cushion the balls of the feet and relieve pressure in the middle foot. The stretchy polymer gel pads relieve pressure in the middle foot area. They come in a pair or a left and right set. Can be slipped over second toe so it will stay in place. Corrected foot support promotes better posture.

Metro Basic Buggy (Models 3M, 3Mb, & Frame Only)

The Metro Buggy is a basic stroller designed for use with children ages 5 to 12 or those who are of similar height and weight. FRAME (LxWxH): Ultra-lightweight folding frame with push handles and a blue baked-on enamel finish. This stroller is 39 inches high x 23 inches wide when open. Folded dimensions are 49 x 11 x 9 inches. Model 3MB includes bus tie-down brackets. SEAT: The seat is 14 inches wide and 12 inches deep. The seat to floor height is 20 inches. The seat back is 26 inches high. An i

Micro Buggy

PROTOTYPE--- The Micro Buggy is an off-road wheelchair designed for use by individuals with lower extremity or mobility disabilities. This gas powered wheelchair can be used for recreation or for tasks such as walking the dog. FRAME: Adjustable suspension; automatic transmission; 3 forward gears and 1 reverse gear; 1.5 inch receiver hitch in front and rear; 8 inch suspension travel; expandable storage system that slip links storage baskets. CONTROLS: The unit is all hand controlled, with a thumb

Micro Cellular Polyurethane Tires

Micro Cellular Polyurethane Tires are wheelchair tires fabricated with microscopic air cells trapped in a matrix of polyurethane rubber. These fully molded snap on tires are designed to provide a cushioned ride, and are lighter than standard hard rubber wheelchair tires. SIZES: Various models and sizes available.

Micro-Tech Seat Belt Alarm

The Micro-Tech Seat Belt Alarm is a wheelchair seat belt and wandering patient system designed for use by individuals who use wheelchairs and have Alzheimer's disease or other cognitive disabilities and are at risk for falls in homes or hospitals. This seat belt is equipped with a standard sensor unit and a Velcro fastening buckle that, once disengaged, alerts a caregiver or hospital staff that the user is exiting the wheelchair and may wander or fall. The Seat Belt Alarm is intended for use wit

Midline Control Bracket

Swingaway mounting bracket for power wheelchair control box. Uses existing control box clamp for mounting to armrest. Aluminum. Round or flat bar stock.

Midline Joystick Mounting Bracket

The Midline Joystick Mounting Bracket is a powered wheelchair controller bracket designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This bracket enables the user to place a wheelchair joystick from the severe left or right to midline. This mounting bracket also allows the joystick to be flipped out of the way for transfers or when not in use.

Miller's Mounting Hardware Components

The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.

Mind-Controled Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a mind-controlled wheelchair using brain computer interface technologies for individuals with mobility and severe disabilities. Researchers at École Polytechnique Fédérale de Lausanne in Switzerland have developed a mind-controlled wheelchair which uses an artificial intelligence system called “shared control” making the brain-machine interface more usable. An individual uses his/her thoughts to create specific brain patterns that are re

Mini Go-Bot

The Go-Bot is a powered cart designed to provide mobility and independence for children with mobility disabilities. Designed for children ages one to eight and up to 36 inches tall, this device can also be used as a transitional aid to train for powered wheelchair use. The device is designed for indoor use or outdoor use on level surfaces and consists of an ABS plastic body, a supine standing frame, and a powered mobility base with a combination positioning seat/standing aid in the center which

Mini Meteor

The Mini Meteor is a lightweight child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Lightweight tubular steel folding frame with anti-tip rollers. The chassis is available in black, yellow, navy blue, or red. Push handles are optional.. SEAT (LxW): 11 x 10, 11 x 11, 12 x 12, or 13 x 13 inches. A detachable backrest is standard. Options include backrest height variation, a seat rail extension kit, a wa

Mini Oxygen Tank Holder For Wheelchairs (Model F706201001)

The Mini Oxygen Tank Holder For Wheelchairs, model F706202001, is a wheelchair oxygen cylinder carrying case designed for use by individuals with mobility and respiratory disabilities. It attaches to the handles and frame of the wheelchair and positions the tank behind the wheelchair to avoid interference with the user’s head or back. The tank holder is made of heavy duty waterproof nylon and has two pockets that can be used to hold one or two cylinders or other small supplies such as tubing.

Mini Phantom 3 Wheel Compact Scooter (Models S35001692 & S35002692)

The Mini Phantom 3 Wheel Compact Scooter is a 3-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (HxLxW): 35 x 37 x 21 inches. The turning radius is 37 inches and ground clearance is 2 inches. The frame disassembles into three pieces for transport. Anti-tippers are standard. Available colors are red (model S35001692) or blue (model S35002692). CONTROLS: PG S-Drive 45A controller with finger pull throttle. SEAT: Height- adjustable, fold-down seat. UPHO

Mini Pouch (Model 9)

Mini pouch attaches beneath the armrest on standard wheelchairs, armrest is loosened and straps slipped between the pad and arm of the frame. Single snap closure. Cordura nylon. 8 colors.

Miniflex 500

The Miniflex 500 is a compact powered wheelchair designed for indoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. The turning radius is 120 centimeters. CONTROLS: P&G/ Dynamics. FWD: Front wheel drive. SEAT (LxW): The anatomically-shaped seat is 46 x 46 centimeters. The backrest height is 30 centimeters, and a variety of optional headrests is available. ARMRESTS: Height- and width- adjustable armrests. WHEELS: Back wheels are joint fi

Miniflex Comfort

The Miniflex Comfort is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has a 120 centimeter turning radius. FRAME (LxW): 82 x 57 centimeters. CONTROLS: P&G/Dynamics electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. An electric seat lift is standard. ARMRESTS: Height- and width-adjustable armrests. WHEELS: Back wheels are joint fixed in the chas

Mjm All Terrain Chair (Model 722-Atc)

The MJM All Terrain Chair, model 722-ATC, is a beach wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The chair can be disassembled for storage or transport, and comes with a storage container and umbrella. FRAME (HxLxW): 52 x 36.5 x 26 inches. The frame is made of PVC plastic and includes a push bar. The push bar height is 39 inches. SEAT (LxW): 18 x 22 inches. The distance from the floor to the top of the cushion/seat is 26 icnches

Mjm All Terrain Chair (Model E720)

The MJM All Terrain Chair, model E720-ATC, is a beach wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (HxW): 38 x 34 inches, with the height measured at the push bar and the width measured outside the wheels. The PVC frame knocks down for storage and transport. SEAT (LxW): 20 x 20 inches. The distance from the floor to the top of cushion/seat is 21.5 inches. WHEELS: Four non-swivel, heavy-duty, high- flotation wheels with non-

Mjm Multi-Position Bariatric Geri Chair (Model 518-Sl)

The MJM Multi-Position Bariatric Geri-Chair, model 518-SL, is a multi-position, bariatric geriatric chair designed for use by individuals who have mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with push handle, a fully-padded seat with a tall seatback, and a cushioned leg rest. The chair is equipped with four threaded-stem casters. DIMENSIONS (HxW): 22 x 21 inches. The casters are 5 inches in diameter. CAPACITY: 300 pounds.

Mjm Multi-Position Bariatric Geri-Chair (Model 518-Pl)

MJM Multi-Position Bariatric Geri-Chair, model 518-PL, is a multi-position bariatric geriatric chair designed for use by individuals 5 feet, 4 inches tall or under who have mobility, balance, or neurological disabilities. This chair has a PVC plastic frame with push handle, a fully- padded seat, a tall seatback, and a leg cushion. The chair is equipped with four threaded-stem casters. DIMENSIONS (HxW): 22 x 18 inches. The casters are 5 inches in diameter. CAPACITY: 300 pounds.

Mjm Multi-Position Geri-Chair (Model518-S)

The MJM Multi-Position Geri-Chair, model 518-S, is a three-position geriatric chair designed for individuals with mobility, balance, or neurological disabilities. This chair is equipped with a fully padded seat, a tall back, a leg cushion and threaded stem casters. DIMENSIONS: The chair is 21 inches wide and the seat depth is 21 inches. The casters are 5 inches in diameter. OPTIONS: Clip-on tray. CAPACITY: 300 pounds.

Mjm Multi-Purpose Chair (Model 131-18-24W)

The MJM Multi-Purpose Chair, model 131-18-24W, is a multi-purpose shower and commode wheelchair designed for use by individuals with mobility, balance, or neurological disabilities or spinal cord injury. This chair can be used as a shower chair, commode chair, transfer chair, or aquatic pool chair. FRAME (WxHxL): 29 x 40 x 33 inches. The frame is no-rust white PVC plastic with an anti-tip design. SEAT (WxD): 18 x 18 inches. The seat is an open-front plastic commode seat. Seat height is 21 inches

Mjm Shower Chair (Model 118-3-A)

The MJM Shower chair, model 118-3-A, is designed for use by individuals with uni-lateral or bi-lateral below the knee amputation. This chair features a PVC plastic frame; a padded, elevated leg extension; an elongated, open-front toilet seat; and four threaded-stem casters. The backrest has water- resistent vinyl cloth upholstery. DIMENSIONS(HxWxD): 40 x 22 x 18 inches. The seat height is 21 inches. The leg extension is 15 inches. The casters are 3 inches in diameter. CAPACITY: 300 pounds.

Mjm Shower Chair (Model 118-3-Adj)

The MJM Shower chair, model 118-3-ADJ, is a height-adjustable shower chair designed for use by individuals with mobility, balance and neurological disabilities. The backrest is covered in water-resistent vinyl mesh. DIMENSIONS(HxWxD): 40 x 45 x 22 inches. The seat height adjusts from 20 to 25 inches. The casters are 3 inches in diameter. CAPACITY: 250 pounds.

Mjm Transfer Board (Model 600)

The MJM Transfer Board, model 600, is a transfer board designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. The board is made of high density polyethylene, and has eight carrying handles and three web nylon restraint straps with side release plastic buckles. DIMENSIONS (LxW): 71 x 23.5 inches. The restraint straps are 2 inches.

Mjm Transfer Chair (Model 509-Mri)

MJM Transfer Chair, model 509-MRI, is a three-position geriatric chair designed for use by individuals with mobility, balance, or neurological disabilities. This chair has a non-magnetic stainless steel frame, an anti-bacterial seat and back cushion, and a sliding footrest. DIMENSIONS: The external width is 28 inches and the internal width is 24 inches. The casters are 5 x 1.25 inches.

Mjm Transfer Chair (Model 530-S/bariatric)

MJM Transfer Chair, model 530-S/Bariatric, is a three-position bariatric geriatric chair designed for individuals with mobility, balance, or neurological disabilities. This model has a PVC plastic frame, four threaded-stem casters, and a padded seat, back, head bolster, and leg cushion. OPTIONS: Dual drop arms. DIMENSIONS: The external with is 34 inches and the internal width is 30 inches. The casters are 5 inches in diameter. CAPACITY: 700 pounds.

Mk Battery.

Alkaline batteries. 6 or 12 volt variety of styles including gel and sealed lead acid batteries. Battery chargers and battery service accessories also available.

Mobi-Chair

The Mobi-Chair® is a floating beach wheelchair that provides a seamless transition from boardwalk-to-beach-to water. Wheelchair users, children and adults with special needs can benefit from the convenience, portability and comfort of the Mobi-Chair® at the beach, at lakes or even in swimming pools. Features of the Mobi-chair®: • Arm rests lift so the rider can transition in and out of the chair with ease. Once in, the rider is secured to the chair by a harness. • The armrests and wheels are com

Mobile Bean Bag Chair

Chair has chromed tubular steel base with casters on the front and small wheels in rear. ABS plastic seat and back shells attach to frame. Vinyl or Naugahyde bean bag, stitched on three sides and zippered on fourth, is one-third filled with polystyrene beads and velcroed to seat and back. Seat is usually reclined at 15 degrees from horizontal; back adjusts from horizontal to nearly vertical with ratchet mechanism. Rear push handles. One size only, with bean bag mattress approximately 4 feet long

Mobile Internet Connected Assistant (Mica)

---- PROTOTYPE --------- PURPOSE: To develop an intelligent wheelchair that uses a remote-controlled or autonomous operation for individuals with mobility disabilities. The Mobile Internet Connected Assistant (MICA), developed by Sven Rönnbäck of Luleå University of Technology in Sweden, utilizes a built-in distance-metering sensor to discover the surfaces that are available and that the wheelchair is being used in a safe manner. Individuals with severe mobility disabilities can use the head-con

Mobile Preschool Chair

CUSTOM ADAPTATION PURPOSE: To provide a child with spina bifida with both access to very low preschool tables and personal mobility. A standard wheelchair was too high to be used at the tables, so a low-level wheeled chair was built. A Sebel Mini Hobnob chair, similar to those used by the other children in the classroom, was set on wheels virtually at ground level. Made of square steel tube, the frame to which the chair was attached, has large front wheels for self-propulsion and smaller rear c

Mobili-T Rover Off Road Wheelchair Kit

The Mobili-T Rover Off Road Wheelchair Kit is an all terrain platform for powered wheelchairs designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Designed to allow the user to access parks, beaches, woods, golf courses, construction sites, farms, and nature trails, this device consists of a large metal platform equipped with over-sized all-terrain tires. The platform is mounted by driving the powered wheelchair up a ramp and then powered by the wh

Mobility Cart

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted mobility cart for a child with arthogryposis, a congenital disorder that causes joint contractures and muscle weakness. The child’s mother was interested in providing the child with the benefits of wheeling around the house unassisted. Wheels were added to a chair to create a mobility device for the child who has good upper body strength. The child sits on the cart and propels his or herself forward by pushing on the wheels

Mobility Device For General Home Use

CUSTOM ADAPTATION PURPOSE: To provide a mobility device that would allow for movement through a family residence (with many obstacles), and be used as a shower chair for person with severe physical disabilities. A mobile chair was created with a plastic seat mounted on a steel chassis with three 250- millimeter (mm) wheels out of alignment. The wheels each have their own running track and their own axle alignment. The chassis is made from a steel bar shaped to suit the three-wheeled design. The

Mobility Module.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Mobility module counteracting the tonic labyrinth reflex in a cerebral palsied child. Increases independent mobility after short training sessions. Modified toy tractor with a foot propelled camshaft drive mechanism in module base. High back seating unit made of plywood measuring 12 inches by 24 inches by 3/4 inches is fastened to base. Foam rubber cushions and lightweight aluminum tubing were also used. Bib style harness was used to secure child into

Mobility Seat Cover

The Mobility Seat Cover is a seat accessory for a scooter designed for use by individuals with mobility disabilities. These seat covers are professionally sewn with durable decorator upholstery fabrics and are machine washable. They attach to the seat with heavy-duty Velcro. The seat cover includes bonded Dacron padding for extra comfort. Depending on the seat style, they either fit over the existing manufacturer’s vinyl seat cover or the vinyl seat cover can be removed and replaced. DIMENSIONS

Mobilizr

The MOBILIZR is a torso support and wheelchair seatbelt for use by people with lower extremity and mobility disabilities, spinal cord injuries and others who use wheelchairs and need assistance to maintain or regain an upright position. This product requires no tools for installation on a wheelchair or scooter with push handles. It fits around the waist and over one shoulder. The MOBILIZR allows the user to bend forward, and then it aids the user to return to an upright position. It adjusts from

Model 7810 Series Heavy Duty

The Monarch Series, Model 7810 Series Heavy Duty, is an adult manual wheelchair with a folding crossbrace design. This heavy duty wheel chair is designed for hospital and institutional use. The frame is made of hardened steel frame. The seat and back measurements are: overall 25 w x 36.25 h x 41.75 l, seat width 18 standard, 16 narrow and 20 wide inches adult, seat from floor 20.5 h, back from seat 15.25 h, depth of seat 16 inches. The embossed upholstery has a textilene inner lining with Britt

Modification To Quick-Release Wheelchair Wheels

CUSTOM ADAPTATION PURPOSE: To prevent quick-release wheelchair wheels from being inadvertently released. The push rims on the quick-release wheels had been removed because the chair user could not propel the chair independently. Doing so, however, exposed the buttons which released the wheels, creating the danger of an inadvertent release if the wheels were bumped while going through doors. The quick-release feature was locked by machining sleeves to fit over the buttons and gluing them in pla

Modifications To Protect A Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation to protect various parts of an electronic wheelchair for a child with right hemiplegia, vision impairment, and developmental delay. There were a number of fittings on the chair that needed attention and had been damaged by the child. The first issue was the control panel for the joystick, which had a thin film cover over the membrane touch buttons that set the direction and mode. The buttons didn’t work unless they were

Modified Jogging Stroller

DO IT YOURSELF ENTRY --- PURPOSE: To adapt a standard jogging stroller to accommodate a growing child with cerebral palsy. An existing stroller was modified by installing a new higher seat cushion higher in the existing fabric seat. The cushion was fabricated, taped, and sewn using a piece of nylon plate for rigidity on the bottom with foam and canvas to cover. This seat assembly was supported by canvas Velcroed to the sides of the existing seat. This allows the seat to be adjusted. A brick coun

Modified Stair Climber

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted modification to a stair climber for an individual who uses a wheelchair. The individual attends a mediation class that requires him to get up a flight of 20 steps. Previously he used a commercially available stair climber that clamped onto his wheelchair and lifted him up the stairs. This adaptation was working well until the user got a new wheelchair which was not compatible with the stair climber. The new wheelchair has a

Modu-Tray

The Modu-Tray is a lapboard with bookholder designed to act as a tray or writing board for wheelchair users. Interchangeable inserts allow the user to have an adjustable easle for computer keyboard, reading, games, or a communication board, or a microwavable, dishwasher-safe fixed bowl that will not tip. The tray is made of a see-through Lexan plastic and features a cutout. It may be modified to fit standing tables, bolster chairs, and hospital bed tables. When fitted to a wheelchair, the tray i

Modular Seat And Back Cushions

The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.

Modularhose.com Assistive Technology Double Kit (Model 90655)

The ModularHose.com Assistive Technology Double Kit, model 90655, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of

Modularhose.com Assistive Technology Double Spring Clamp Kit (Model 90674)

The ModularHose.com Assistive Technology Double Spring Clamp Kit, model 90674, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plat

Modularhose.com Assistive Technology Kit (Model 90650)

The ModularHose.com Assistive Technology Kit, model 90650, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 3 feet of Loc-Li

Modularhose.com Assistive Technology Kit Plus (Model 90652)

The ModularHose.com Assistive Technology Kit Plus, model 90652, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes 6 feet of L

Modularhose.com Assistive Technology Kit With Two Plates (Model 90654)

The ModularHose.com Assistive Technology Kit with Two Plates, model 90654, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes preassembled and includes

Modularhose.com Assistive Technology Spring Clamp Kit (Model 90673)

The ModularHose.com Assistive Technology Spring Clamp Kit, model 90673, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a 4 x 6 inch plate, 2 5.75

Modularhose.com At Ipad Kit (Model 90670)

The ModularHose.com AT iPad Kit, model 90670, is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system can be used with iPad 1 and iPad 2. The kit comes with an iPad holder with a silicon edge for protection and grip, an integrated fixed mount plate attached to the iPad holder, 2 spring clamps with integrated fixed mount, 2

Modularhose.com At Starter Kit (Model 90680)

The ModularHose.com AT Starter Kit, model 90680, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit comes with all the common parts used in the assistive tec

Modularhose.com Round Tube Clamp Kit (Model 90750)

The ModularHose.com Round Tube Clamp Kit, model 90750, is a computer or communicator mounting kit for wheelchair or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The kit is intended to be used with Loc-Line 1-inch or 0.88-inch diameter tubing. Plates are made of stainless steel. The kit includes five-piece round tube clamp with knob, Loc-Line connector, Loc-Line double socket f

Modularhose.com Spring Clamp Kit With Plate 1 Foot (Model 90665)

The ModularHose.com Spring Clamp Kit with Plate 1 Foot, model 90665, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a

Modularhose.com Spring Clamp Kit With Plate 2 Feet (Model 90667)

The ModularHose.com Spring Clamp Kit with Plate 2 Feet, model 90667, is a stand for a tablet computer, a computer or communicator mounting kit for wheelchair, or switch mounting hardware designed for use by individuals with use of only one hand, mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This kit can be used to mount and position a switch, tablet computer, communicator, or a variety of other assistive products. The kit includes a round plate connected to a

Molded Transfer Board (Model 6032)

The Molded Transfer Board, model 6032, is a high-impact, heavy duty plastic board with tapered ends designed to assist individuals with mobility disabilities with transfers. The board is 8.25 x 24.25 inches.

Mooney Rehabilitation Base (Model M128)

Wheelchair base for adding seating system. Chrome plated tubular steel frame with 12 inch spoked rear wheels, 8 inch casters at front, breaking and wheel lock folding system and backpost with push handles. Attendant propelled only.

Morph‚Ñ¢ Wheels

Morph™ Wheels are a foldable wheelchair wheels for use by people who use wheelchairs. Winner of the Medtrade 2013 Innovation Award and the London Design Museum 2013 Product of the Year in Transportation, Morph™ Wheels are the world's first foldable wheelchair wheel available on the market for purchase. They allow users to travel in cars, trains and airplanes without being limited by storage space (they fit in overhead storage compartments). Users can change these tires without complex tools. Mor

Moss Lap Tray

The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.

Mother's 3Rd Arm

Mother's 3rd Arm is a flexible, portable cup or baby bottle holder designed for use by children and adults with upper extremity disabilities. This device consists of a large cylinder affixed to a long flexible neck with a large clamp at the base. The adjustable clamp permits the device to be secured to the edges of tables or desks, the back of automobile seats, bed rails, or to the tubular frame of a stroller, wheelchair, or high chair. The cup or baby bottle is placed in the cylinder and the ne

Mother's Third Arm

Mother’s Third Arm is an adjustable cup and bottle holder that can be used by children and adults with limited arm and grasping strength. The user is able to access cups and bottles held with the Arm’s adjustable Velcro strap. The Arm has an easy-to-use clamp and a flexible tube that can be positioned in a variety of angles. It can be attached to wheelchairs, tabletops, strollers or highchairs.

Motive Motorized Wheelchair Kit

---- PROTOTYPE --------- PURPOSE: To create a prototype of a motorized wheelchair powered by gasoline that can be used by individuals with mobility disabilities to participate in off-road activities such as hunting and fishing. This prototype uses a small motorcycle engine and the chair is capable of reaching speeds up to 25 miles per hour and geared to handle hills. A do-it-yourself kit is expected to be available through Motive Transportation in January 2010. The kit uses an engine almost iden

Motorised Wheelchair Mover

CUSTOM ADAPTATION PURPOSE: To enable a recreational therapist who had a back injury to move clients who used wheelchairs around the facility. Because of the back injury, the therapist was unable to push wheelchairs or lift heavy objects. To build the unit, the motor, gearbox, elctronics, and rear wheels of a second-hand scooter were used in conjunction with a chasis built of square hollow section steel. The unit has a platform at the front on which the wheelchair, with its user, is loaded. The

Motorized Scooter Board (Model 1510)

The Motorized Scooter Board, model 1510, is a scooter board designed to enhance motor planning skills, spatial orientation, and understanding of cause and effect relationships for individuals with physical or neurological disabilities. This scooter board is ideal for young children who have never moved independently, providing the opportunity to learn control their bodies in space and to learn to stop at obstacles. When activated by a capability switch (not included) connected to the control jac

Motorized Wheelchair Trainer (Model 1520)

Motorized wheelchair trainer is a wheelchair control switch assessment designed to provide assessment of user's perceptual skills prior to purchase of a powered wheelchair. The device contains four directional arrows which light up and sound a beeper in response to the direction of the joystick. In use, the teacher or therapist stands behind the client who is seated in a conventional wheelchair. By watching the indicator arrows on the device, the teacher can push the wheelchair in the direction

Mount 'n Mover

The Mount 'n Mover is a wheelchair mounting kit for communicators, tablet or laptop computers, or a camera mount for wheelchair designed for use by individuals who use wheelchairs. The device can also be used to mount trays, easels, reading stands, remote controls and more. Available in single- or dual-arm horizontal models, the device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt, a paddle to unlock the wrist joint to rotate the attached tray or device, and a

Mountee (Models Mt12 & Mt14)

The Mountee is a child's tilt-in-space wheelchair designed for use with children with mobility, neurological, or severe physical disabilities. FRAME(LxWxH): Open, model MT12 is 19 x 16 x 22 inches; folded it is 20.5 x 17.5 x 9 inches. Open, model MT14 is 21 x 18.5 x 24 inches. The folding, tilt-in-space frame offers 5 to 45 degrees of tilt from the vertical. Push handles are standard. A crah-tested transit frame is available on both models. SEAT(WxD): Model MT12 is 8 to 12 x 11 to 15 inches. Mod

Movi (Model M4000)

The Movi, model M4000, is a transport wheelchair designed for use by people with balance, lower extremity or mobility disabilities or spinal cord injury. The Movi is specifically designed to transport patients within a hospital, and it is intended to be ergonomic for both patients and the hospital staff responsible for moving them. FRAME (HxLxW): 46 x 45 x 27 inches; the push handle height is adjustable between 36 and 52 inches from the floor. The heavy duty frame is white; other colors are opti

MTS HandyBar, Model 96314

MTS HandyBar is designed to assist people with mobility disabilities. It can also be used by expectant mothers and people with lower extremity disabilities. The HandyBar intended to help people get on and off the car easily. 

Mulepack (Model 7012) & Mulepack Ii (Model 7013)

The Mulepacks are wheelchair back pouches designed to carry things for the person in a wheelchair. Each caddy is made of heavy urethane coated Nylon pack cloth with a strong poly webbing for the straps and 2-way zippers with steel rings for good grip when opening or closing. The Mulepack II (7012) has a main storage area with a wallet and key pouch and large envelope pocket. The Mulepack I has a main storage area and one front envelope pocket. The packs will fit wheelchairs with or without push

Multi Purpose 5 Pocket Pouch (Model 156)

The Multi Purpose 5-Pocket Pouch, model 156, is a wheelchair side pouch which may also be used on walkers. This transparent plastic carrying caddy features two adjustable hooks for fastening.

Multimode Interface (Model 3420)

Permits the use of proportional or switch actuators to operate an Everest & Jennings power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, acceleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching (continuous) whee

Multimode Interface (Model 3470)

Permits the use of proportional or switch actuators to operate a Quickie power wheelchair plus additional devices such as a power recliner, environmental control system, computer and/or communicator. Two wheelchair operating modes include adjustments for speed, accleration and deceleration. Additional adjustments vary proportional joystick throw (sensitivity), set the veer rate (steering amount) when using a switch actuator, and select momentary and/or latching ( continuous) wheelchair drive. Tw

Multimode Scanner (Model 3370) & Scanner Display (Model 2995)

The Scanner, in conjunction with a single switch actuator, is used for mode selection and operation of a Multimode Interface. The Scanner converts single switch actuator commands into the four directional commands (forward/reverse/left/right) required for system operation.

Mvp-502-Ms Lighweight Reclining Wheelchair

The MVP-502-MS is a lightweight manual wheelchair with a reclining back designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxLxW): 52 x 47 x (24, 26 or 28) inches. Overall width of the wheelchair is dependent on the seat width selected. The folding frame is constructed of high strength aircraft grade aluminum. The folded width is 14, 15 or 16 inches, depending on the seat width. The frame color is diamond black. Anti-tippers and rigidifying push bar are sta

Mvp-502-TP Folding Reclining Transport Wheelchair

The MVP-502-TP is a lightweight transport wheelchair with a reclining back designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxLxW): 52 x 47 x (23, 25 or 27) inches. Overall width of the wheelchair is dependent on the seat width selected. The folding frame is constructed of high strength aircraft grade aluminum. The folded width is 14, 15 or 16 inches, depending on the seat width. The frame color is diamond black. Anti-tippers are standard. Frog legs front

My4Hands

My4Hands is a lapboard for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The My4Hands independence assistant is a polyethylene board that has a proprietary "hold fast" high friction material coating on each side so the lapboard will hold position on the user's lap and items placed on the lapboard will remain in place. My4Hands also insulates the user's legs from heat generated by objects (such as laptop computers or cooking pots

Mydesc Arm - Standard And Removable Models

The MYDESC Arm is an add-on armrest wheelchair accessory designed to enhance the versatility of the MYDESC Custom Desktops (see separate entries) or to be used alone. This accessory allows the MYDESC units to be mounted on the side of armchairs and wheelchairs. This steel arm is padded with foam and available in two configurations: Standard and Removable. The MYDESC Standard Arm (model 347-S501) is designed to be a fixed accessory and attaches directly to wheelchairs and other furniture using st

Mydesc Custom Desktops

The MYDESC Custom Desktops are adjustable lapboards ergonomically designed to provide a hard writing or reading surface to wheelchair users and other individuals who work away from a desk or table and to alleviate the eye strain and neck pains associated with lap work. These portable units enable the user to swivel, tilt, or pivot the desk surfaces through an infinite number of positions in order to achieve the most comfortable desk surface accessibility possible. ADJUSTABILITY: These Custom Des

Mydesc Direct Mount Models (Models Dm500 & Dm900)

The MYDESC Direct Mount Model 350-DM500, and the 90 Degree Direct Mount Model with Elbow Assembly 350-DM900, are mounting hardware for the MYDESC lapboards to clamp onto a wheelchair's frame or armrest. They include clamps and an adjustable MYDESC lapboards. The clamps will accommodate tubing from 3/4 to 1.25 inches in diameter, and both can be mounted either horizontally or vertically. Model 350-DM900 provides more height and distance from the wheelchair user's body.

Mydesc Flip Top Storage Desk (Model 250-31)

The MYDESC FlipTop Storage Desk, model 250-31, is a lapboard designed for use by wheelchair users. This laptop desk is suitable for an artists or students who needs a place to put their supplies. It has a tilting work surface that lifts to reveal a storage compartment. Because both sides of the work surface are supported by a ball-joint, the surface can be tilted or shifted from right to left, and one side swings away for transfers. An Air Spring Lifter helps to ease lifting and lowering of the

Mydesc Scooter Model, The (Model 5000)

The MYDESC Scooter Model, model 5000, is a swing away lapboard designed for use with scooters. This lapboard attaches to the bottom of the scooter seat on a curved post that fits between the seat and the controls. The work surface features tilt-, height-, and swing-away adjustments. The unit features a transparent acrylic work surface, powder-coated steel tubing, and aluminum brackets that support up to nine pounds. The unit rotates and rises with the seat and it can independently swing out of t

Mydesc Tilt-Top Desks

The MYDESC Tilt-top Desks are lapboards designed to provide an adjustable hard writing or reading surface for persons who work away from a desk or table, or for wheelchair users. These portable desks are ergonomically designed to accommodate the user's needs by swiveling, tilting, and pivoting through an infinite number of positions. When use of the desk surface is completed, the desktop swings away from the user's body with a single wrist motion. There are four different tilt-top models availab

Nantahala Wheelchair Tire, The

The Natahala Wheelchair Tire is a replacement rubber tire designed for use by wheelchair users. This high-performance tire will not mark floors and is dirt resistant. It is designed to perform well for extended distances. DIMENSIONS: 26 x 1 inches. COLOR: Charchol.

Natural Birchwood Overlay (Models 11D.4A To 11D.4C)

The Natural Birchwood Overlay, models 11D.4A to 11D.4C is designed for use with wheelchair trays by Consumer Care Products Inc (models 11D; see separate entries). These overlays have a clear lacquer finish, and snap in and out of the trays. The overlays are designed to allow the user to benefit from the clear surface of the tray when moving, and from the opaque surface of the Birchwood insert when working on the tray. DIMENSIONS: Model 11D.4A fits trays 16 x 20 x 1/4 inches; Model 11D.4B fits tr

Natural-Fit

The Natural-Fit is a hand rim designed for use on wheelchairs. This rim replaces the chair's existing hand rim and comes in two pieces: The contoured thumb area and the oval component. The combination of these two components provides a gripping surface, a specially contoured thumb rest, and dual surfaces for propulsion and braking. The system is available with rivet nut or tab mounting and attaches to standard spoke wheels with either a six-position rivet nut mount or a six-position tab mount.

Ne-At Headrest Bracket

The NE-AT Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury, cerebral palsy and other individuals who need adjustable head support. This hinged bracket has 0.25-inch countersunk mounting holes spaced 1 inch apart, with a spring loaded crank handle for tightening in tight spaces.

Ne-At Interim Leg Support

The NE-AT Interim Leg Support is a wheelchair leg support designed for people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. It is intended to provide temporary extra lower leg support for wheelchair users who are in a cast or who need additional support for some other reason. The unit has a pad to support the user's lower leg, a double ball and socket joint to adjust the position and angle, a clamp for attaching to the user's

Ne-At Quick Release Mini Trap Assembly

The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.

Neasy Swing Away Aug Com Mounting System

The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio

New And Rebuilt Electric Motors

Electric motors, new and rebuilt, for Everest and Jennings and Invacare wheelchairs and three wheel scooters. New motors are manufacturers' original equipment with a one year factory warranty. We offer a 90 day warranty on rebuilt motors. Quantity discounts are available. Orders and repairs are handled at the factory and delivered by UPS. New motors available for E & J 3P,3W Marathon, 3V, Sprint, and 33B only. Motors rebuilt for the following: Invacare, Amigo, Pace Saver, A-Bec, Lark, Dart,

New Heights Electric Elevating Manual Wheelchair (Model 08 01 01A-D)

The New Heights Electric Elevating Manual Wheelchair, model 08 01 01A-D, is designed for used by individuals with lower extremity amputations, lower extremity disabilities, and mobility disabilities. The wheelchair is designed as a general purpose utility wheelchair with the ability to temporarily elevate the seat from standard seated height to a height greater than that of a person standing. FRAME (HxLxW): 30 x 37 x 23-29 inches. The frame is available in a choice of colors and is collapsible

New Heights Electric Elevating Power Wheelchair (Models 08 02 02A-C)

The New Heights Electric Elevating Power Wheelchair, models 08 02 02A-C, is a powered elevating wheelchair designed for use by individuals with lower extremity amputations, lower extremity, mobility, and severe physical disabilities, and spinal cord injury. The wheelchair is designed as a general purpose utility wheelchair with the ability to temporarily elevate the seat from standard seated height to a height greater than that of a person standing. FRAME (HxLxW): 51 x 33 x 24 inches. CONTROLS

No Limits Trike

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted motorized power tricycle add on for manual wheelchairs for individuals with lower extremity or mobility disabilities or spinal cord industry. The No Limits Trike is a power system complete with a power drive including a wheel with 12 inch disk brakes, motor, and a 24 volt battery pack mounted on the front fork with handle bar. The trike includes a left side brake lever and right side variable speed twist throttle that can b

No-Slip Grip-Clip

The No-Slip Grip-Clip is a carrying aid for wheelchair, designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It consists of a wrap around strap with a strong aluminum spring activated karibiner clip that can be used to carry items on the front tubing of a wheelchair's frame. The clip holds the item to be carried and the strap a rubber pad embedded in the strap prevents it from sliding down the wheelchair tubing.

Nomad 3 Pt3

The Nomad 3 PT3 is a 3-wheel mobility scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. Front basket is standard and an anti-tip rear caster is included. FRAME(HxLxW): 36 x 43 x 23.5 inches. The ground clearance is 3 inches and the turning radius is 37 inches. Color choices are blue, silver or red. DRIVE: Rear wheel drive with a 450-watt motor. CONTROLS: Dynamic Rhino 70Amp controller with peed control, battery indicato

Non-Powered Wheels To Powered

---- PROTOTYPE --------- PURPOSE: To create a prototype of an attachable device which converts a non-motorized wheelchair into a motorized wheelchair similar to wheelchair design used by the pop-culture comic book icon of Professor Xavier form the X-Men franchise. Created by Ju Hyun Lee from Yanko Design the device attaches to any standard wheelchair providing instant motorized power. This device has potential uses for hospitals, nursing homes, physical therapy centers, and for the average wheel

Norco Push Kuffs (Model Nc94320)

The Norco Push Kuffs, model NC94320, are leather wheelchair push gloves designed to protect the hand from callouses and cuts. The cuffs cover the palm and back of the hands, leaving fingers exposed. The palm features a thick protective pad. The gloves are secured with hook and loop closures.

Nutron R5I Power Wheelchair

The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The

Nutron R5Ilx Power Wheelchair

The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18

Nutron R5Ilxp Power Wheelchair

The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T

Nylon Back Pack (Model 16C005)

The Nylon Back Pack, model 16C005, is a wheelchair back pouch designed for use by individuals who use wheelchairs. Made of heavy- weight cordura nylon, this pouch carries small items and features nylon straps for hanging over wheelchair handles, two outside pockets, and Velcro closure flaps. DIMENSIONS: (HxW): 15 x 14 inches.

Oasis (Kameleon) Wheelchair

The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit

Odyssey (Models S45200 & S45300)

The Odyssey, models S45200 and S45300, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 55.1 x 26.4 x 39.8 inches. The ground clearance is 4.5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, heavy-duty front and rear bumpers, a front large carry basket, front and rear lights with tur

Odyssey (Models S45200 & S45300)

The Odyssey is a four-wheeled powered scooter designed for use by individuals with mobility disabilities. Features include directional front and rear lights with turn signals and a large carry basket. FRAME (LxW): 51 x 26.4 inches. The turning radius is 70 degrees with 4.5 inches of ground clearance. The scooter comes with anti- tippers, full front suspension, and front and rear bumpers. The scooter is available in red (model S45200) or blue (model S45300). CONTROLS: Adjustable tiller. SEAT: Hei

Off Road Wheels

The Off Road Wheels are rear wheelchair wheels designed for outdoor use on manual wheelchairs with quick-release axles. These spoked wheels wheels provide excellent traction off paved surfaces and a more comfortable ride on paved surfaces. The set includes mountain bike style tires, rims, push rims, and hubs. DIMENSIONS: Available in 24 x 1.95 inches or 26 x 2.1 inches. OPTIONS: Mag wheels and plastic-coated push rims. COLOR: The tires are non-marking gray.

Offset Multi-Axis Headrest Hardware

The Offset Multi-Access Headrest Hardware is a headrest accessory designed for use by individuals with severe physical disabilities and spinal cord injury. This hardware comes with a horizontal bar and ring for attaching a headrest pad. Our headrest hardware also comes with a back clamp which attaches the vertical tube to the back of the chair. COLOR: Black chrome.

Okapi

The Okapi is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair system uses an Impala wheelchair frame with a large size Panda standard seating system (see separate entries). FRAME (HxLxW): 88 to 120 x 102 x 66 centimeters (size 1) or 88 to 120 x 102 x 71 centimeters (size 2). Length without footrests is 72 centimeters. SEAT (LxW): 33 x 34 centimeters (size 1) or 41 x 36 centimeters (size 2)

Olympiad Racing Hand Rim

Push rims for racing with foam coating for nonslip grip, aluminum rings with threaded aluminum stand offs (6 for 36 spoke models), 12 inch by 7/ 8 inch rim weighs 9 ounces total, mounts on spokes with rubber backed washers, easily removable for interchanging rims. Available from 10 to 19 inch outside diameter; and 5/8 inch, 7/8 inch or 1 inch hand rim diameters. Fits 24, 28, 32, and 36 spoke patterns. 20 inch model available for standard street chairs at slightly higher price. Foam coating is ov

One-Piece Econo Footrest Extender

The One Piece Econo Footrest Extender is an economical device that attaches to a wheelchair footrest for prevention of foot drop and feet from slipping behind the footrest. The raised footrest improves posture and allows for proper seating alignment. The cushioned back protects lower leg against contact with the wheelchair, and the device secures easily with quick-release straps.

OPair Wheelchair Bike

Optima 2G

Optima 2G is a powered seating system designed for use by individuals with neurological or severe physical disabilities. Tilt-in-space and reclining systems are available and can be mounted on a power base (not included) from Invacare, Pride Mobility, Sunrise Medical, Leisure Lift, TracAbout, Wheelchairs of Kansas, or others. CONTROLS: Attendant controls are standard, with independent toggle switch and joystick interface controls for power base and seating system functions. Alternative input dev

Optimax

OptimaX is a bariatric seating system designed for use by individuals with neurological or severe physical disabilities. This system can be expanded in three dimensions and is available in tilt-only, recline-only, and tilt/recline configurations. FRAME (HxLxW): Back height plus 12 x seat length plus 20 x seat width plus 6 inches (tilt-only) or seat width plus 8 inches (recline only and tilt/recline). The frame has powder-coated black wrinkle finish. CONTROLS: Single post 4-position toggle switch

Optimus

Optimus is a powered wheelchair designed for use by individuals with mobility disabilities and spinal cord injury. FRAME: Total length, 123 centimeters (105 centimeters without leg support). CONTROLS: The electronic control panel has a liquid crystal display (LCD) and LED (light emitting diode) signals. Its angle can be set independently of the height-adjustable armrest, and it can be swung to the side and back so the arm can fit beneath a table edge. SEAT (LxW): 45 to 49 x 43 centimeters. The

Optipush

The OptiPush is a wheelchair propulsion monitor designed for professional use in clinical or research settings with people with mobility and lower extremity disabilities and spinal cord injury and others who use wheelchairs. This device examines wheelchair propulsion in the natural environment of the wheelchair user because it mounts directly to most standard manual wheelchairs (a wheelchair is required but not included). The system comes with wheels and hand rims with diameters from 24 to 26 in

Orion Ii

The Orion II is an adult manual tilt-in-space wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 27.5 x 44 inches. The seat-to-floor height ranges from 13.25 to 20 inches, depending on the choice of wheels and casters. The frame is equipped with a low or high push bar and cane-style push handles. A multi-adjustable axle plate is standard. Rear anti-tips are optional. The frame is av

Ormesa New Novus Stroller

Ormesa New Novus Stroller is a manual wheelchair designed for children and young adults with lower extremity, mobility, or neurological disabilities or spinal cord injury requiring minimal to moderate positioning needs. The Ormesa New Novus Stroller can be folded for transportation and can be customized for the user’s specific needs. It comes with removable/washable, latex-free and fire resistant fabric. Large rear wheels enable it to easily travel over rough terrain.

Orthocare Economy Arm Positioner Elevator (Models 3032 & 3033)

The Orthocare Economy Arm Positioner Elevator (##3032 and ##3033) is an elevating armrest and positioner designed for elevation of the forearm. This wedge elevator is made of foam with a contoured recess to position the arm. This device can be used in bed or with the pivoting arm positioning tray for wheelchairs (see separate entry). Vinyl covers are available; call manufacturer for prices. SIZES: Small (##3032, $9.35) and Large (##3033, $14.75).

Orthocare Elevating Horizontal Arm Orthosis

The Orthocare Elevating/Horizontal Arm Orthosis - Supinated or Pronated is an elevating armrest and positioner for use with wheelchairs or other chairs. The armrest is available in two styles: Models ##3034 to ##3039 are anatomically designed for supinated, neutral positioning that inhibits spasticity; Model ##3040 has a universal design that allows for pronated positioning with natural palmar arch. The system consists of an aluminum U-channel that adapts to all wheelchair arms securely with sta

Orthocare Frame Mounting Block (Model 3042)

The Orthocare Frame Mounting Block ##3042 is a mounting clamp accessory that attaches Orthocare arm supports or positioning orthoses (see separate entries) to wheelchair arms. The block secures to the wheelchair arm with two bolts to grip the tubing, and has two screw holes for orthosis attachment.

Orthocare Leg Brace

The Orthocare Leg Brace ##4045 is a leg positioner made of polyurethane foam. It has a contoured cavity to keep the leg in place, and may be used as a legrest pad for leg comfort when wearing a cast. The brace surrounds the leg on three sides with an open top, and extends from the ankle to the mid-thigh (of adults).

Orthocare Pivoting Arm Tray (Model 3012) & Dynafoam Elevated W.h.o. (Model 3013)

The Orthocare Pivoting Arm Tray and Dynafoam Elevated W.H.O. are two separate devices designed for use one with the other. PIVOTING ARM TRAY (##3012, $45.25): This mounting clamp for a wheelchair accessory is made of ABS plastic fastened to an extruded aluminum channel with limited pivot capability. The L-bars of the clamp channel adjust to adapt to all wheelchair arms. DYNAFOAM ELEVATED W.H.O. (##3013, 36.45): This wrist and hand orthosis fits into Pivoting Arm Tray to create an elevated arm po

Orthocare Pivoting Horizontal Arm Positioner - Pronated

The Orthocare Pivoting/Horizontal Arm Positioner - Pronated is a wheelchair armrest pad that will adapts to all wheelchair arms. This device was designed to provide pronated hand positioning with natural palmar arch. The armrest is cut down at the proximal end to allow for better positioning of the arm, and is narrow at the wrist section to decrease arm roll. The arm and hand are secured in place with 2 Velcro straps. A reinforced pivot rivet pivots the arm in a horizontal plane. DIMENSIONS: 18-

Orthocare Slip-On Footrest Extenders (Model 3014)

The Orthocare Slip-On Footrest Extenders ##3014 are designed to eliminate heel slippage and override, and to provide static positioning for spasticity. The extenders are made of vacuum formed ABS (plastic). They have a raised, curved heel section and flat foot section. Padded Velcro straps cross the instep to hold each foot in place. The slip-on mounting adapts to standard footrests. The design allows a vertical fold-up position without interference. Sold in pairs.

Orthocare Sure-Grip (Models 3017 Thru 3022)

Orthocare Sure-Grip gloves are push gloves or dressing mitts designed to allow total hand use while providing complete coverage of the palm, thumb, and back of hand. The gloves are made of polyethylene and rubber with a totally padded, non-slip surface. The gloves have a Velcro cinch strap with D-ring puller. SIZES: Small, Medium, and Large for right or left hand. The gloves can be adapted to a custom fit with ordinary scissors.

Orthofab Ch Wheelchair

The Orthofab CH Wheelchair is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Folding aluminium composite frame includes side pouch for personal belongings and a clear plastic window for an identification label. SEAT (LxW): 16 x 16, 17 x 16, 18 x 16, 18 x 18, 20 x 16, or 20 x 18 inches. The seat is a removable tension-adjustable sling with folding handle. The adjustable-tension sling back has height ad

Orthopedic Cart (Model 3000Oc)

The Orthopedic Cart 3000OC is designed for the younger individual who are unable to use a wheelchair or casted patients. The low floor to litter height is suited for younger patients. The unit is fabricated of oak and birch with a protective clear lacquer coating. Features include "Uni-Mold" Mag Composite wheels and casters, six position fowler backrest, toggle brakes, and push handle handrims for self-propulsion, a rear push handle, and a wrap-around, non-marring bumper. Custom sizes are availa

Orthotic Drop Seat (Model 6331)

The Orthotic Drop Seat, model 6331, is a solid seat insert designed to lower a wheelchair seat to enable foot propulsion of a wheelchair or to enable the user to reach the footplates. This seat replaces a standard sling seat and provides adjustable drop and it may be configured to create a wedge to prevent forward sliding. A removable padded, wipe-clean vinyl cover is included. DIMENSIONS: This seat fits 18-inch wide chairs and the drop is adjustable up to 3.5 inches.

Osprey 4410 4-Wheel Heavy Duty Scooter (Models Osprey4410Mg20Cs & Osprey4410Mg22Cs)

The Osprey 4410 4-Wheel Heavy Duty Scooter, models OSPREY4410MG20CS and OSPREY4410MG22CS, is a heavy-duty four-wheel scooter designed for outdoor use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 54 x 29 x 50 inches. The ground clearance is 7 inches, and the turning radius is 73 inches. This scooter includes a headlight, a horn, turn signals, dual rear view mirrors, a front plastic basket, and

Otto Bock Tall Back And Modular Back Headrest Mounting Kit & Otto Bock Headrest Adapter Kit

The Otto Bock Tall Back and Modular Back Headrest Mounting Kit ($5) and the Otto Bock Headrest Adapter Kit ($20) are headrest accessories that allow attachment of Otto Bock headrest mounting hardware directly to the Jay Back cushion, compensating for the contour of the cushion.

Outback

The Outback is a child's manual tilt-in-space wheelchair designed for use by children with mobility or severe physical disabilities. FRAME: Adjustable tilt-in-space frame with built-in growth capability. A one-piece, height-adjustable stroller handle and anti-tippers are included. The frame width adjusts from 11.5 to 15.75 inches and the base length is adjustable. The frame is available in Uluru red, Daintree green, or clear blue. SEAT: The seat depth ranges from 5.9 to 20 inches. The seat heigh

Overlander (Model Pev 2000)

The Overlander, model PEV 2000, is a heavy-duty powered wheelchair designed for indoor and outdoor use by obese individuals with mobility disabilities. FRAME: Heavy-duty suspension frame. CONTROLS: Programmable micro-controller with right- or left-mounted joystick. RWD: Non-slip interlocking rear belt drive. SEAT: No seating system is standard. A solid seat with foam or a solid seat frame are optional. The seat is available in widths ranging from 18 to 28 inches. UPHOLSTERY: Stain-resistant sul

Oversize Deluxe Poly-Carbonate Wheelchair Tray (Model 11E)

The Oversize Deluxe Poly-Carbonate Wheelchair Tray 11E is a lapboard for use by wheelchair users. The tray includes a universal mounting system, continuous 5/8 inch high lip/retaining edge, captive locking-knobs, and telescoping support arms for strength. The rim is fused into the plastic tray for added strength without added weight. DIMENSIONS: 24 x 24 x 1/4 with a stomach cutout 14 inches wide and 8.5-inch deep. WEIGHT: 12 pounds.

Oxbow Headrest (Model Ox100)

The Oxbow Headrest, model OX100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side. DIMENSIONS: 15 x 4 inches.

Oxygen Tank Holder (Model 16C204A)

The Oxygen Tank Holder, model 16C204A, is an oxygen carrying case designed for use individuals with respiratory disabilities who use wheelchairs. This nylon tank holder has two mounting straps that are adjustable to fit most wheelchairs. The top strap fits over the push handles of the wheelchair and the bottom strap fits over the tip bars. These straps are long enough to mount the oxygen tank off center to avoid contact with the user’s head and back. This case holds size D and E or other 4-inch

Oxygen Tank Holder For Wheelchair (Model F706201000)

The Oxygen Tank Holder, model F706201000, is designed to keep a cylinder of oxygen attached to the back of a wheelchair. The holder has a 5-inch inside diameter for insertion of size "E" or 4-inch diameter tanks. A 26-inch long tank is positioned off-center behind the wheelchair back to avoid interference with the wheelchair user’s head or back. The holder is made of heavy duty, waterproof black nylon.

P.a.w.s. Wheelchair

The P.A.W.S. Wheelchair is a prototype all-terrain powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This six-wheel drive wheelchair has parallel all wheel steering (PAWS), which allows it to travel on sand or rough trails and up steep grades, and also to navigate tight office space and public facilities. The seat and all of the wheels share a common linkage that allows them to rotate relative to the frame while remaining parallel to one another. FR

Pacesaver Eclipse Premier

The Pacesaver Eclipse Premier is a four-wheeled scooter designed primarily for outdoor use by individuals with mobility disabilities. FRAME (LxW): Overall, the scooter is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The wheelbase is 36.25 inches. The scooter disassembles for transport. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls are standard. The control box includes a battery-level ind

Pacesaver Espree Atlas & Espree Atlas 5

The PaceSaver Espree Atlas and the PaceSaver Espree Atlas 5 are three-wheeled scooters designed for indoor or outdoor use by large individuals with lower extremity and mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The wheelbase is 33.5 inches. The scooters disassemble for transport. A stretch frame is optional. The Espree Atlas and Espree Atlas 5 are available in ocean blue, midnight black, or candy apple red. CONTROLS: Til

Pacesaver Espree Premier 9-Inch & 10-Inch

The Pacesaver Espree Premier 9-Inch and 10-Inch are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius on the 9-inch model. The 10-inch model is 45 x 24 or 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space

Pacesaver Espree Titan

The Pacesaver Espree Titan is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius.The wheelbase is 33.5 inches. The scooter disassembles for transport. A stretch frame is optional. The scooter comes in a choice of ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a

Pacesaver Fusion250 & Pacesaver Fusion350

The PaceSaver Fusion250 and Fusion350 are three-wheeled scooters designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 22 inches (Fusion250) or 45.5 x 23.5 inches (Fusion350), and both models have a 2-inch ground clearance. The turning radius is 29.5 inches for both models. The scooters disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. T

Pacesaver Fusion450 & Pacesaver Fusion500

The PaceSaver Fusion450 and Fusion500 are three-wheeled scooters designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches, and both models have a 2-inch ground clearance. The turning radius is 33.25 inches for both models. Both models disassemble for transport, and they are available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a battery-level in

Pacesaver Plus Iii Atlas

The PaceSaver Plus III Atlas is a three-wheeled scooter designed for use indoors or outdoors by large individuals with lower extremity or mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The wheel base is 33.5 inches. The PaceSaver Plus III Atlas disassembles for transport. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control bo

Pacesaver Plus Iii Jr. 9-Inch And 10-Inch

The PaceSaver Plus III Jr. is a three-wheeled scooter designed for indoor or outdoor by individuals with mobility disabilities. FRAME (LxW): 42 x 24 (10-inch) or 23 inches (9-inch) with a 4.5-inch (10-inch) or 4-inch (9-inch) ground clearance and a 32-inch turning radius. The wheel base is 30 inches. The scooter disassembles for transport. It is available in candy apple red. CONTROLS: This scooter features a dual moisture protected Snag Guard throttle and 110 amp power boost battery saver contr

Pacesaver Plus Iii Premier 9-Inch & 10-Inch

The PaceSaver Plus III Premier is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): The 9-inch model is 45.5 x 24 inches with a 4.25-inch ground clearance and a 34.5-inch turning radius. The wheelbase is 33.5 inches. The 10-inch model is 45 x 24.75 inches with a ground clearance of 4.5 inches and a turning radius of 35 inches. The scooter disassembles for transport. This scooter is available in ocean blue, midnight black, or cand

Pacesaver Plus Iii Titan

The PaceSaver Plus III Titan is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 24.75 inches with a 4.5-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. This scooter is available in ocean blue, midnight black, or candy apple red. CONTROLS: Tiller-mounted controls with thumb levers are standard. The contro

Pacesaver Scout

The PaceSaver Scout is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 39 to 41 x 39 x 25 inches. The overall height is 31 to 33 inches with the seat back folded down. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout includes front anti-tippers and features independent coil spring suspension. The seat frame

Pacesaver Scout Boss 4.5 Cc / Ss

The PaceSaver Scout BOSS 4.5 CC/SS is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 x 44 x 25.5 inches. The turning radius is 24.4 inches, and the maximum curb height climbed is 2.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. This chair features a heavy-duty steel frame with independent coil-spring suspension and includes height-

Pacesaver Scout Boss 6 & 6.75

The PaceSaver Scout BOSS 6 and 6.75 are heavy-duty powered wheelchairs designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 48 x 28. x 42 to 44 inches. The turning radius is 27 inches, and the ground clearance is 3 inches. These chairs disassemble for transport. Both chairs feature a heavy-duty steel frame with independent coil-spring suspension and includes height-adjustable, rigid front anti-tippe

Pacesaver Scout M Series (Models M1 & M1-350)

The PaceSaver Scout M series is a rigid heavy-duty powered wheelchair designed for indoor and outdoor use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. Both models convert from a front-wheel drive (FWD) to a rear-wheel drive (RWD)wheelchair by selecting a switch. FRAME (HxLxW): In font wheel drive, the chair 38 to 40 (model M1) or 38.75 to 40.75 (model M1-350) x 38.75 with FWD or 38.25 with RWD x 24 inches. The height with the seat back down

Pacesaver Scout Rf-P3 & Rf-P4

The PaceSaver Scout RF-P3 and RF-P4 are rigid heavy-duty powered wheelchairs designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 with Admiral's seat back folded down x 40.5 x 25 inches. 24.5 to 27.5 with the Com-For-Back seat folded down x 40.5 x 25 inches. The turning radius is 21.5 inches. The ground clearance is 3 inches. The chair disassembles for transport. The Scout RF-P3 and RF–P4 include front anti-t

Pack Rat Jr. Large Mini Pack

The Pack Rat Jr. Large Mini Pack is a wheelchair side pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This unit allows the user to carry items on a wheelchair. It has a large zippered main storage compartment and a front expandable net pocket, with two Velcro straps on the back for attaching the pack to the wheelchair. On the front is a net pocket for holding smaller items safely and close at hand. The unit

Pack Rat Wheelchair Backpack

The Pack Rat Wheelchair Backpack is a wheelchair back pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. Made from water resistant 600D PVC coated material, it has two large straps with loops for attaching to a wheelchair with or without a push handle. The pouch has two large zippered storage compartments. There is an opening for earphones attached to an MP3 player or radio stored in pocket in the front compa

Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)

The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1

Padded Leg Rest With Attached Foot Rest & Padded Side Panel Leg Rest With Attached Foot Rest

Custom size leg and footrest pads with two pairs of bent Kydex or aluminum brackets, mounting footrest pad to legrest pad, and legrest pad to bottom edge of solid seat with bolts through threaded wood inserts. Adjustment for length and depth available. Can also be ordered with four side pads, two on each side of legrest and two on each side of footrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood, with vinyl covering.

Palmer Independence (Model 24)

The Palmer Independence, model 24, is a powered three-wheeled scooter designed for one-handed, outdoor use by individuals with arthritis, mobility or neurological disabilities, or spinal cord injury. The scooter has full differential gear drive, detachable arms, a contoured loop steering wheel, and a dash panel on the steering bar that contains lights, horn, on/off key, and gear indicator light. A twist grip throttle is also located on the steering bar. This scooter is equipped with moped tires.

Palmer Yardkart (Model 24)

The Palmer Yardkart, model 24, is a three-wheeled, powered all terrain cart designed for outdoor use by individuals with mobility disabilities. Standard equipment includes an on-off key with locking switch, sealed beam headlight, tail light, brake light, horn, fuel gauge, and large heavy-duty basket. FRAME: Heavy-duty, non-folding frame does not disassemble for transport. The dimensions (LxWxH) are 72 x 35 x 38 inches. CONTROLS: Utilizes a pressure twist grip control on a triangular handlebar t

Panther

The Panther is a child's tilt-in-space wheelchair designed for children with mobility disabilities. FRAME: Polyester-coated steel frame collapses for transport and storage. The frame is available in three sizes and in a choice of bright raspberry, deep blue, or silver. Rear anti-tippers are standard. Size 1 (WxHxL) is 59 x 87 to 111 x 84 centimeters; size 2 is 62 x 87 to 111 x 92; and size 3 is 67 x 87 to 111 x 100 centimeters. SEAT: Solid seat and back with tilt in space and a low shear reclini

Para Gloves (Model Pwc200)

The Para Gloves, model PWC200, by Hatch are push gloves specifically designed for paraplegic wheelchair users. These gloves have three-quarter length finger sleeves and a fully covered thumb sleeve. They are made of leather on the palm side and have a nylon mesh material with Velcro closures on the back side of the hand.

Parafree Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a minimalist wheelchair for individuals with lower extremity or mobility disabilities or spinal cord injury who are looking for a functional, stylish, and sporty mobility solution that provides a little extra workout throughout the day. Parafree is a minimalistic wheelchair with a unique frame structure designed to compel individuals with paraplegia to maintain constant balance, encouraging abdominal, back and core muscle training. The i

Paragolfer

The ParaGolfer is a powered standup wheelchair designed to enable people with mobility and lower extremity disabilities and spinal cord injury to play golf. This all-terrain powered chair features both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about while either in a seated or standing position. The ParaGolfer also can be used for other sports that require standing (such as archery or

Paraplis Umbrella Holder

The Paraplis Umbrella Holder is an umbrella holder for wheelchair or stroller designed for use by individuals with mobility disabilities or spinal cord injury. The unit attaches to stroller or wheelchair to hold an umbrella to protect both the seated user and an individual pushing the chair or stroller. When in use, it swings up to hold an open umbrella. When not in use, it swings down to carry the closed umbrella at the side of the stroller or chair. The device attaches to any shape bar or tube

Paxbac

PaxBac is a wheelchair back support designed to promote a more upright posture and to provide the proper amount of back support for wheelchair users with sling-back chairs. Made of molded foam, the unit fastens to the back of most sling back chairs with built-in attachment hooks. A tension strap allows the user to increase or decrease the amount of support provided to meet the differing needs of various activities. A loop handle on the tension strap enables the user to make adjustments while rem

Pedal Chair

The Pedal Chair is a geriatric chair designed for use by individuals who need support while sitting. Features include seat tilt infinitely adjustable up to 18 degrees; armrests with independent height adjustment within a range of 4 inches; a height-adjustable seat; four casters, including two fixed casters with brakes; and padded neckrest cushion and lower side pads. OPTIONS: 20-inch front or rear mounted mag style wheels. DIMENSIONS (LxW): Seat is 17 x 18 or 20 inches. The floor-to-seat height

Pegasus

---- PROTOTYPE --------- PURPOSE: To design a prototype of a stand up wheelchair for individuals with paraplegia or mobility disabilities. One goal of this prototype, Pegasus, is to break away from the negative images and appearances of current wheelchairs. Pegasus allows for an efficient movement into the upright position. A manual actuation in combination with an electric drive motor with gyroscopic sensors (inspired by the Segway) allows the user to maneuver in very small spaces. TITLE: Pega

Pelvic Stabilization Y Belt (Model 103-4000)

Y belt pelvic stabilization system provides control of pelvic tilt, rotation and obliquity. Price includes modification of solid seat to accommodate (with new seat). Sizes: extra small (6 to 8 inch sitting depth), small (8 to 11 inches), medium(11 to 14 inches).

Pelvic Strap (Sb05)

The Pelvic Strap (model SB05) is a 1 1/2 inch nylon webbing belt designed to position, stablize and restrain an individual's pelvic area wen seated in a seating system or wheelchair. It has a push-button buckle closure. The strap's length is adjustable on one side, and there are three positioning grommets on opposite side.

Permoveh (Personal Mobile Vehicle)

---- PROTOTYPE --------- PURPOSE: To create a prototype of a personal mobility vehicle for individuals with lower extremity or mobility disabilities or spinal cord injury. The Permoveh (from Personal Mobile Vehicle) is a powered wheelchair alternative developed by Komori Masaharu, an associate professor from Kyoto University. The Permoveh uses a wheel-in-wheel system that allows the vehicle to travel diagonally and laterally with no need for turning space. The prototype allows wheelchair users t

Personal Tilt Desk

Personal Tilt Desk is designed for use by individuals using a wheelchair and those who need an adjustable desk. The Personal Tilt Desk is adjustable in height and also includes a cut out for additional stability. It is available in mobile or static versions. The Personal Tilt Desk top tilts to provide options for supporting and positioning objects in relation to the child.

Personal Urban Mobility and Accessibility (PUMA)

The Personal Urban Mobility & Accessibility (PUMA) prototype is for wheelchairs users that are looking for different form of transportation. The PUMA has two self-balancing in-wheel electric motors which are controlled by gyroscopes, as well as a fly-by-wire system. The PUMA can currently cover 35 miles on one charge, but it is expected that the range will extend to 50 miles or more in the future. The PUMA has a digital network that can pull up and read information on nearby parking spaces,

Phantom (Models S35001 & S35002)

The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back

Phat Jack

The Phat Jack is a wheelchair lifter designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This unit was designed specifically for the Melrose Rugby wheelchairs (see separate entry), but the manufacturer can customize it for other wheelchairs. To use the Phat Jack, it is rolled under the rear bar of the wheelchair's frame, and the handle is pushed down. The rear of the wheelchair stays up until the handle is lifted back up. The unit lifts and holds

Phoenix 3 Wheel Compact Scooter (Model S35010)

The Phoenix 3 Wheel Compact Scooter, model S35010, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a front large carry basket. FRAME (LxWxH): The overall dimensions are 37.8 x 18.9 x 34.6 inches. The ground clearance is 2 inches and the turning radius is 32.3 inches. It has rear 2-inch anti-tippers. The scooter can be disassembled into four

Phoenix 4 Wheel Compact Scooter (Model S35015)

The Phoenix 4 Wheel Compact Scooter, model S35015, is a four-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. This scooter includes a headlight and a large carry basket. FRAME (LxW): The overall dimensions are 37.8 x 20 inches. The ground clearance is 2 inches, and the turning radius is 44 inches. It has 2-inch rear anti-tip wheels. The scooter can be disassembled into 4 pieces for sto

Phoenix Hd3

The Phoenix HD3 is a heavy-duty three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight and a large front carry basket. FRAME: The scooter can be disassembled into 4 pieces for transport. It has rear anti-tip wheels and a plastic basket and headlight on the front of the tiller. Two sets of interchangeable color accent panels, in red and blue, are included. CONTROLS: Electronic c

Phoenix Hd4

The Phoenix HD4 is a heavy-duty four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME: This scooter includes a headlight and a large front carry basket mounted on the tiller and rear anti-tip wheels.The scooter can be disassembled into 4 pieces for transport. Two sets of interchangeable color panels in red and blue are included. CONTROLS: Electric controller mounted on an adjustab

Phone Holster

DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual who uses a wheelchair to transport and keep within reach a cordless telephone. A holder was fashioned from plastic siding and shaped with a heat gun. The holder has side wings and a bottom support to hold the phone. A pine mounting block was shaped to receive the holster on one side and the tubular wheelchair frame on the other. Two screws fix the holder clip to the pine. Thin pine pieces are laminated on the edge of the block to prevent

Pilot 2310 3-Wheel Medium Size Scooter (Models Pilot2310Bl18Cs, Pilot2310Bg18Cs, Pilot2310Bl20Cs & Pilot2310Bg20Cs)

The Pilot 2310 3-Wheel Medium Size Scooter, models PILOT2310BL18CS, PILOT2310BG18CS, PILOT2310BL20CS and PILOT2310BG20CS, is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inch

Pilot 2410 4-Wheel Medium Size Scooter (Models Pilot2410Bl18Cs, Pilot2410Bg18Cs, Pilot2410Bl20Cs, & Pilot2410Bg20Cs)

The Pilot 2410 4-Wheel Medium Size Scooter, models PILOT2410BL18CS, PILOT2410BG18CS, PILOT2410BL20CS and PILOT2410BG20CS, is a four-wheel scooter designed for indoor or outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWXH): The overall dimensions are 47 x 22 x 38 inches. The ground clearance is 3 inches, and the turning radius is 54 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signa

Pioneer 1 Midsize 3 Wheel Scooter (Model S232/s235)

The Pioneer 1 S232/S235 Midsize 3 Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 27 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with thumb lever handle bar steering. The til

Pioneer 10 Bariatric 4 Wheel Scooter (Model S347)

The Pioneer 10 S347 Bariatric 4 Wheel Scooter is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, rear view mirror, and horn. FRAME (HxLxW): 50 x 60 x 26 inches. The ground clearance is 4 inches and the turning radius is 65 inches. Color choices are red and champagne. The scooter is equipped with and anti-tippers. CONTROLS: Dynamic DS160A controller with automatic safet

Pioneer 10 Deluxe Bariatric 4 Wheel Scooter (Model S341)

The Pioneer 10 Deluxe Bariatric 4 Wheel Scooter, model S341, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 54 x 27 inches. The ground clearance is 4 inches and the turning radius is 62 inches. Anti-tippers are standard. Color choices are red or champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Pioneer 2 Deluxe 4 Wheel Scooter (Model S246)

The Pioneer 2 Deluxe S246 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. This scooter disassembles for storage or transport. The ground clearance is 2 inches and the turning radius is 41 inches. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with adjustable tiller and thumb lever handle bar ste

Pioneer 2 Midsize 4 Wheel Scooter (Model S242/s245 )

The Pioneer 2 S242/S245 Midsize 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 46 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 35 inches. This scooter disassembles for storage or transport and is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb-lever handleba

Pioneer 2Dlx Twin Front Wheel Compact Scooter (Model S246)

The Pioneer 2 DLX S246 Twin Front Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 2 inches and the turning radius is 41 inches. This scooter disassembles for storage or transport. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb lever handle bar s

Pioneer 3 3-Wheel Scooter (Model S132/s135 )

The Pioneer 3 S132/S135 3-Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 45.5 x 46 x 25 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter disassembles for transport or storage. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with thumb-lever handlebar steering. The tiller angle is

Pioneer 3 S131 3 Wheel Scooter (Model S131)

The Pioneer 3 3 Wheel Scooter, model S131, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, turn and hazard signals. FRAME (HxLxW): 45.5 x 46 x 23 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. The tiller angle is adjustable. SEAT (WxD): 19 X 17 inches slidin

Pioneer 4 Full Size 4 Wheel Scooter (Model S142/s145)

The Pioneer 4 Full Size 4 Wheel Scooter, model S142/S145, is a scooter designed for use by individuals with mobility disabilities. Features include headlights, taillight, turn signals, and hazard lights. FRAME (HxLxW): 45.5 x 47 x 25 inches. Anti-tippers and a chromed steel bumper that also serves as a lift handle are standard. CONTROLS: Dynamic Rhino 70A controller with touch keypad and an on/off key switch. The adjustable tiller folds down for storage. SEAT (LxW): 17 x 18.5 inches. The captai

Pioneer 4 S141 4 Wheel Scooter

The Pioneer 4 4 Wheel Scooter, model S141, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, and turn and hazard signals. FRAME (HxLxW): 45.5 x 47 x 23 inches. The ground clearance is 4 inches and the turning radius is 49 inches. This scooter is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. Tiller angle is adjustable. SEAT (WxD): 19 x 1

Pioneer 5 Micro-Size 3 Wheel Scooter (Model S534)

The Pioneer 5 Micro-Size 3 Wheel Scooter, model S534, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and a multi-function display console. FRAME (HxLxW): 35 x 40 x 21.5 inches. The ground clearance is 2.4 inches and the turning radius is 33.8 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller angle i

Pioneer 9 Bariatric 3 Wheel Scooter (Model S337)

The Pioneer 9 Bariatric 3 Wheel Scooter, model S337, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and rear view mirror. FRAME (HxLxW): 50 x 57 x 26 inches. The ground clearance is 3.5 inches and the turning radius is 56.1 inches. Anti-tippers are standard. Color choices are red and blue. CONTROLS: Dynamic DS160A controller with automatic safety steering control.

Pioneer 9 Deluxe Bariatric 3 Wheel Scooter (Model S331)

The Pioneer 9 Deluxe Bariatric 3 Wheel Scooter, model S331, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 49 x 27 inches. The ground clearance is 4 inches and the turning radius is 50 inches. Anti-tippers are standard. Color choices are red and champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering

Plastic Scooter Board (Model 4841)

The Plastic Scooter Board, model 4841 is a scooter board designed for use by children with upper or lower extremity disabilities. This plastic scooter is constructed of heavy-duty poly-propylene. It features safety grip side handles and rubber swivel casters. The user can propel the scooter in a sitting, kneeling, or face-down position. DIMENSIONS (LxW): 12 x 12 inches. CAPACITY: 200 pounds. COLOR: Blue.

Plastic Wheelchair Tray (Model 11A)

The Plastic Wheelchair Tray 11A is a clear acrylic lapboard that attaches to wheelchair arms with hook and loop straps that adjust with D-rings. The tray is rimless and has a radiused and polished edge. The tray has a 4-inch deep stomach cutout. DIMENSIONS: 17 x 24 x 1/4 inches; straps are 2 inches wide. WEIGHT: Approximately 5 pounds.

Playtray

The Playtray is a lap tray designed for use by children and adults with disabilities. This heart shaped tray is constructed of a durable, impact-resistant plastic and features a tabletop with a no-spill raised edge, a large storage compartment, a 360-degree gutter drink holder, and a carrying handle. The top is large enough to accommodate a standard notepad, a laptop computer, or food and drink. Its base provides stable support by fitting snugly over a person's lap. The tray is dishwasher safe.

Pneumatic Roller Seat

DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide independent mobility and exercise away from a wheelchair for a child with muscular dystrophy. A low, backless stool with a padded seat can be adjusted to the proper height to enable the child to propel the stool with his/her feet. The caster wheels should move easily over hardwood or carpet and the seat should swivel 360 degrees. MATERIALS: Low wheeled stool. TITLE: Doing It Yourself. JOURNAL: Quest. REF: Volume 12, Number 1, January/February 2005. WE

Pocket Technician (Model 662)

The Pocket Technician, model 662, is a control switch accessory designed to aid in determining the cause of malfunctions in switch-adapted devices. The unit tests batteries, switches, and devices. Placing an N, triple-A, double-A, C, D, or 9-volt battery in the unit will cause the meter to show the battery condition. To test a switch, the switch is plugged into the female jack; when the switch is activated and working, the unit will buzz. To test a device, the device is connected to the unit; if

Polar Paws (Model 300)

Polar Paws, model 300, are cold weather gloves designed to ensure the users grip no matter how cold or wet it gets while maintaining hand warmth. Originally designed for use by NFL receivers, these gloves are intended for a wide range of users: Hunters, skiers, ice fishermen, waterskiers and scuba divers to name a few. SIZES: Small-XLarge. WARRANTY: Any products that are found to be defective in material or labor will be replaced at no charge.

Pollywog Transport Chair

The Pollywog Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This transport chair can be transformed into a self-propelled wheelchair by removing the rear casters and substituting 24-inch wheels (included). FRAME: All aluminum frame. SEAT: 18-inch seat width. This chair has a fold-down back with carry pocket. UPHOLSTERY: Nylon upholstery. ARMRESTS: Full-length folding arm. BRAKES: Dual brakes for use as wheelchair or tra

Poly-Carbonate Wheelchair Tray (Models 11B.1 To 11B.4)

The Poly-Carbonate Wheelchair Tray, models 11B.1 to 11B.4, is a clear plastic lapboard with straps and D-rings for adjsutment, a 4-inch deep stomach cutout, and a 5/8-inch high styrene plastic rim. DIMENSIONS: Model 11B.1 is 16 x 20 x 1/4 inches; Model 11B.2 is 19 x 24 x 1/4 inches; Model 11B.3 is 24 x 24 x 1/4 inches; and Model 11B.4 is 24 x 24 x 1/4 inches with an 8-inch deep stomach cutout. WEIGHT: Models 11B.1 and 11B.2 are approximately 6 pounds; Models 11B.3 and 11B.4 are 8 pounds.

Poly-Fly High Strength, Light Weight Wheelchair/flyweight Transport Chair Combo (Models Tr16, Tr18 And Tr20)

The Poly-Fly High Strength, Light Weight Wheelchair/Flyweight Transport Chair Combo, models TR16, TR18 and TR20, is a manual lightweight wheelchair and transport wheelchair for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair can be converted from a standard manual wheelchair to a transport wheelchair by removing the large rear wheels so that the chair rolls on 4 casters that are fixed in the rear and swivel in front. FRAME (LxWxH):

Polycarbonate Tray

The Polycarbonate Tray is a wheelchair lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The tray is made of polycarbonate and is available with no rim or with a polycarbonate, wooden, or rubber rim. SIZES: Child for 11 to 12 inch wheelchair; Junior for 13 to 14 inch wheelchair; Teen for 15 to 16 inch wheelchair; Adult for 17 to 18 inch wheelchair; Extra-Wide for 19 to 20 inch wheelchair; 2X-Wide for 21 t

Polycarbonate Tray (Model Tr03) & Elbow Pads (Tr21)

The Polycarbonate Tray (model TR03, $125) is a lapboard 1/4-inch thick with a rim across the front and sides designed for use on wheelchairs and seating systems. There is one size tray with cutout. The Elbow Protectors (TR21, $70) come in black only and are designed to be mounted to the tray.

Polyester Wheelchair Pads (Models Msc019470, Msc019471, Msc019472, & Msc019473)

Polyester Wheelchair Pads are footplate (model MSC019470), calf (model MSC019471), armrest (model MSC019472), and seat / back (model MSC019473) pads designed for use by individuals who use wheelchairs. These soft, flame-retardant polyester pads protect and support the arms, legs, and feet. The pads are machine washable and do not mat. The calf, armrest, and seat / back pads are latex-free.

Pommel Sit-Straight

The Pommel Sit-Straight is a foam seat cushion with a built-in pommel for abduction designed to reduce sacral sitting and to limit forward movement of the pelvis of individuals using sling seat style wheelchairs. The cushion has a concave bottom and a flat top. The pommel reduces the danger of adduction contracture and has a core that extends through the cushion to the cushion base for added stability. The material of the surface of both the cushion and the pommel is made of T-Foam (see separate

Pool Access Chair

The Pool Access Chair is a pool wheelchair designed for use by individuals with mobility disabilities. The chair is designed to operate in a pool environment or shower. Users can get in and out of the pool via a platform lift or ramp. FRAME: PVC pipe with anti-tip design. SEAT: 18-inch wide plastic seat. ARMRESTS: Flip-out armrest. BRAKES: Dual locking brakes. CASTERS: 3-inch front rubber caster wheels with stainless steel swivel. WHEELS: Gray non-skid rear wheels with user grip. FOOTRESTS: Exte

Pool Hippocampe

The Pool Hippocampe is a three-wheeled wheelchair designed for use at swimming pools by individuals with mobility disabilities. FRAME: The frame is available in small, medium, large, and extra-large. The small frame is 46 inches long, the medium frame is 50 inches long, the large frame is 54 inches long, and the extra-large frame is 62 inches long. Folded dimensions (HxL) are 15 x 45 inches for the small frame, 15 x 49 inches for the medium frame, 15 x 53 inches for the large frame, and 15 x 5

Pool Wheelchair

The Pool Wheelchair is a wheelchair for pool designed for use by individuals with mobility disabilities, lower extremity disabilities, and spinal cord injury. The chair is made of PVC plastic, with stainless steel bolts, screws, and front wheels. The rear wheels are all-plastic with rubber tread and independent action parking brakes. DIMENSIONS (HxLxW): 38 x 30 x 27.5 inches. The seat height is 21.5 inches and the internal width is 17.75 inches.

Portable Computer Mount

The Portable Computer Mount is a wheelchair mounting kit for communicators and portable computers. Designed to be mounted on the right or left side of the wheelchair, this unit fits most communicators and portable computers and can be adjusted to hold the device at the right height, position, and angle for comfortable operation. This mount can be folded out of the way when not in use, but is not designed to be moved independently by the user.

Portable Foot Rest

This Portable Foot Rest is designed for individuals who are in danger of DVT or Deep Vein Thrombosis. A foot rest may be needed to correct posture. The foot rests extends, is adjustable and folds up to fit in a carry on bag.

Posey Body Holder (Model 1731)

The Posey Body Holder, model 1731, is a safety restraint for a bed or wheelchair. It consists of a wide cotton flannel body wrap with four long straps. The restraint's slot may be positioned in the front for limited movement or rear for increased movement of the user. The straps attach to a bed frame or the wheelchair tilt bars with quick-release ties. It is machine washable. SIZES: Small, medium, large and extra large. DIMENSIONS (Pad) (LxW): 41.5 x 7.5 inches (small); 48 x 7.5 inches (medium);

Posey Breezeline Pelvic Holder (Models 4411 & 4427)

The Posey Breezeline Pelvic Holder, models 4411 and 4427, is a pelvic restraint designed for people with lower extremity or mobility disabilities and others who use wheelchairs to prevent the user from sliding out of the wheelchair or geri-chair. It is available with either a double tie strap for triangulation (model 4411) or a slide buckle. SIZES: Small, medium or large. DIMENSIONS (LxW): Model 4411 is 17.75, 21 or 24 x 17 inches (model 4411) or 16.5, 19 or 23 x 17 inches (4427). Upper waist st

Posey Self-Releasing Belt (Models 4183, 4183L, 4220, 4222, 4229 & 5145)

The Posey Self-Releasing Belt, models 4183, 4183L, 4220, 4222, 4229 and 5145, are wheelchair seat belts for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This belt has an airline-style buckle allowing for one-handed release by the user. It is made of machine-washable polyester webbing and can be used on a shower chair. The belt mounts on the wheelchair or shower chair with a screw (models 4183 and 4183L), rear removable buckle (4220),

Positioning Belt (Buckle Type) (Model 92133040)

The Positioning Belt (Buckle Type), model 92133040, is a wheelchair seat belt designed for use by individuals with mobility and lower extremity disabilities or spinal cord injury. The belt is adjustable and constructed of black nylon webbing with a metal buckle. The seat belt mounts to the wheelchair back at waist level, and it includes attaching hardware. DIMENSIONS (LxW): 36 x 2 inches.

Posturetex-Multiway Cushion

Posturetex-multiway cushion is designed for individuals with limited mobility and use a wheelchair or a scooter for mobility. It is a versatile cushion featuring a 2 inch nodular foam base as well as a 2 inch nodular foam back which can be folded in half to make a 4 inch base cushion. The 2 inch base cushion is available with standard or coccyx cut out. Covered in black jacquard velvet which is removable for machine washing and a carry handle easy transportation. Spare covers are also available

Power Base Recliner Seating System

Power recliner designed for Everest and Jennings Lancer, Fortress 655 FS, Invacare XT powered wheelchairs, Quickie P-300, and Permobile Max90 & Super 90. Assembled; systems include reclining frame, rigid seat, rigid or sliding back, complete armrest and legrest assemblies, arm and leg troughs, standard headrest, toggle switch to control recline, and mounting interface to wheelchair. Rigid back 16 inches to 25 inches, sliding back 19 inches to 25 inches in one inch increments. Underseat 24 Vo

Power Buddy

The Power Buddy is a USB charger for powered wheelchairs and wheelchair light designed for use by individuals with lower extremity, mobility or severe physical disabilities. The unit plugs into the charger port of the wheelchair controller and enables the user to charge cell phones, MP3 players, tablet computers, and other USB devices while in the wheelchair. A universal USB adapter is included. The unit is equipped with a flexible gooseneck to enable positioning to meet the user's needs. The un

Power Chair Cover (Model 0129)

The Power Chair Cover, model 0129, is a wheelchair cover designed for use on powered wheelchairs. Made of weather-resistant nylon, the cover features elasticized, reinforced seams that fit the cover to the powered wheelchair. There are grommets along the bottom edge if the cover needs to be tied down. A cover storage bag is included. DIMENSIONS (HxLxW): 32 x 35 x 23 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Power Chair Joystick Cover (Model V2200)

The Power Chair Joystick Cover, model V2200, is a powered wheelchair control cover designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. Made of urethane covered water-resistant nylon with a transparent plastic panel over the joystick, this cover fits around the controller to protect it from dirt and moisture while still allowing use. DIMENSIONS (HxWxD): 14 x 5 x 4 inches.

Power Picco

The Power Picco is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored frame folds to 36 centimeters after batteries are removed, and includes a support roll. CONTROLS: Programmable single-knob electronic controls. RWD: Electric power drive. UPHOLSTERY: Black. ARMRESTS: Padded armrests. BRAKES: Pressure brake for regular use, and drum brake for downhill use. CASTERS: Two front ca

Power Pumper

Power Pumper is a ride-on toy designed for use by children with physical or neurological disabilities. It is propelled by a push-pull rowing motion powered by using arms and legs, legs only, or arms only. It offers full body aerobic workouts and motor skill development. CAPACITY: 300 pounds. COLORS: Black and Red or Lime and Purple. WARRANTY: One year limited warranty against defective parts and manufacturing.

Power Recliner Interface (Model 3350)

Used in conjuction with a Multimode Interface to permit operation of a power recliner by the same actuator used to operator the wheelchair. Multiple Power Recliner Interfaces may be used to independently operate multiple recliner functions. A toggle switch is provided to select either latching (continous) or momentary recliner operation, and separate up and down speed adjustments are provided to adjust the rate of recliner movement.

Power Tommy

The Power Tommy is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored tubular frame is foldable after removal of batteries. The side panel is removable. CONTROLS: Left or right joystick controls. RWD: Rear wheel drive. ARMRESTS: Height-adjustable and removable arm support. WHEELS: Optional wheel cover. WARRANTY: four-year limited warranty for frame, 2 years for electronics and c

Powerchair Quick Modification

CUSTOM ADAPTATION PURPOSE: To make a powered wheelchair shorter for use under existing tables. Replace the existing front casters with roller blade casters and the rear drive wheels with smaller drive wheels. DIMENSIONS: The front casters are 4 inches in diameter (104 millimeters) and the replacement rear wheels are 8 x 3 inches. WEB SITE: http://www.wheelchairmodifications.org. REF: Powerchair Quick Modification. Wheelchairmodifications can also be reached at 5533 A Pony Farm Drive, Richmond,

Powered Elevated Chair

CUSTOM ADAPTATION -- PURPOSE: To provide a customized lifting chair for an individual with mobility disabilities that can be easily moved throughout a residential setting, including going through doorways. The chair has a U-shaped base made of rectangular hollow steel with a vertical post at the back, and large casters on the front ends of the U and smaller ones at the back. There are also larger bike-type wheels on either side which can be used to propel the chair if necessary. Additionally, th

Powered Wheelchair Footrest

CUSTOM ADAPTATIONPURPOSE: To enable an individual with multiple sclerosis and severe footdrop to use a wheelchair without assistance. The woman is unable to lift her feet up to conventional footrests. A pair of powered footrests were designed and fabricated using automobile power window motors and switches. The footrests detach when not needed and can be mounted on the wheelchair while the user is seated in it. Both footrests lower to ground level, enabling the user to slide her feet on or off.

Powerhorse Wheelchair Driver

The Powerhorse Wheelchair Driver is designed for use by individuals with limited lower leg amputation, multiple sclerosis, neuropathy, spinal cord injury, stroke, traumatic brain injury and osteoarthritis.  It allows users to move about their home, business or farm. Easy access to the operator platform allows the operator to quickly transition from moving around in the chair to navigating their environment at speeds up to 15 MPH. The Powerhorse is designed to allow the user to stay in your their

Powertech Vent Power Center

The PowerTech Vent Power Center is a portable ventilator power adapter for powered wheelchair designed for use by wheelchair users with respiratory disabilities. This power converter allows a portable ventilator to be powered by a wheelchair's batteries, eliminating the need for separate ventilator batteries. It connects to all electric power wheelchairs, and provides clean, stable, and regulated DC power to the ventilator. The PowerTech Vent receives DC power from the wheelchair battery at 24 v

Pride Concorde Scooter

The Pride Concorde Scooter is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. This scooter has front and rear running lights and a front wire basket, and disassembles for transport. Available in hunter green only. CONTROLS: Angle-adjustable tiller with a tiller-mounted control box. An on/off key switch with automatic shutoff is included on the control box. RWD: Rear-wheel drive. SEAT: Height-adjustable padded s

Prima

Prima is a manual wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Overall width is seat width plus 8.5 inches. Minimum folded width is 11 inches. The frame is made of aircraft quality aluminum tubing with epoxy paint in choice of six colors. SEAT (LxW): 14, 15, 16, 17, 18, 19, or 20 inches x 14, 15, 16, 17, or 18 inches (single cross frame) or 16, 17, 18, 19, 20, 21, or 22 inches (double cross frame). The seat

Prima Si (Tango) Wheelchair

The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b

Pro-Tennis Ace & Pro-Tennis Elite

The Pro-Tennis Ace and Pro-Tennis Elite are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. Both models are designed specifically for use in playing wheelchair tennis. FRAME: Adjustable-height frame constructed from titanium aerospace alloy tubing. The Pro-Tennis Elite has a fully loaded frame with integral camber bar. SEAT: The Pro-Tennis Ace has a fixed seat with an adjustable camber bar. FOOTRESTS: All models

Profiler Mounting System

The Profiler Mounting System is a wheelchair mounting kit for communicators. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables. Lightweight and adjustable, the unit is available for mounting on square or round tubing (specify choice) and can be moved to the side with the lift of a single lever when not in use. This system accommodates most communicators and notebook computers. The unit supports up to 15 pounds. OPTIONS: A variety of mounting plates and release optio

Profiler-Lite Mounting System

The Profiler-Lite Mounting System is a wheelchair mounting kit for communicators or switch mounting hardware. This system mounts to wheelchairs, walkers, hospital beds, strollers, or tables with square, oblong, or round tubing. This system accommodates lightweight communicators and most switches and supports up to five pounds, including pressure on the device. The unit can be mounted on the right or the left side and the universal base mount can be adjusted 360 degrees from front to back and 180

Prone Trolley/scooter Board.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Prone board on casters to encourage weightbearing on hands and knees, give the feeling of motion, increase mobility, strengthen arms, improve coordination, facilitate head control, improve motor planning, allow moving about and for fun. Prone board made of plywood, sized according to use (i.e. prone, on knees) and size of child, on four casters, padded with foam and covered with vinyl. Includes drawings and suggestions. SKILLS REQUIRED: Woodworking. AU

Pronto M51 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount.

Pronto M71 Power Wheelchair

The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent

Pronto M9I Power Wheelchair

The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v

Proportional Head Control

The Proportional Head Control is a powered wheelchair controller designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. This headrest-based joystick enables the user to control a power wheelchair by rotating his or her head on a headrest pad. This controller is available for P&G electronic controls.

Proportional Head Control (Model 3500)

A proportional actuator consisting of a movable padded headrest and a control switch. Movement of the headrest is converted to directional commands required by the Multimode Interface for mode selection and oepration. During wheelchair operation, the proportional head control allows precise control of both speed and direction.

Protective Cover For Wheelchair Controls

CUSTOM ADAPTATION PURPOSE: To protect powered wheelchair controls from rain. See-through plastic covers were sewn with a slit in the top for access to the joystick. The covers function like bottomless boxes and fit snugly over the controls and the joystick anchors them in place. The covers were bound with bias tape in a color of the child's choice and decorated with glitter. The covers can be put on and removed as needed. TITLE: Under Cover. JOURNAL: TAD Journal. REF: Vol 22 no 1, Autumn 2002:

Prowler 3310 3-Wheel Full Size Scooter (Models Prowler3310Mg20Cs & Prowler3310Mg22Cs)

The Prowler 3310 3-Wheel Full Size Scooter, models PROWLER3310MG20CS and PROWLER3310MG22CS, is a heavy-duty three-wheeled scooter designed for outdoor use by large or obese individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a horn, turn signals, dual rear view mirrors, a front bumper, and a front basket. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the tu

Prowler 3410 4-Wheel Full Size Scooter (Models Prowler3410Mg20Cs & Prowler3410Mg22Cs)

The Prowler 3410 4-Wheel Full Size Scooter, models PROWLER3410MG20CS & PROWLER3410MG22CS, is a heavy-duty four-wheeled scooter designed for outdoor use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 51 x 26 x 49 inches. The ground clearance is 5 inches, and the turning radius is 70 inches. This scooter includes rear anti-tip wheels, a headlight, a horn, turn signals, dual rear view mirror

Public Aid Tray (Models 33050, 33051, 33052, & 33053)

The Public Aid Tray is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): Model 33050 fits 12-inch chairs and is 18 x 19 inches with a 12-inch wide torso cutout. Model 33051 fits 14-inch chairs and is 20 x 20 inches with a 13-inch wide torso cutout. Model 33052 fits 16-inch chairs is 22 x 21 inches with a 14-inch wide torso cutout. Model 33053 fits 18-inch wide cha

Push & Transfer Glove

Push & Transfer Gloves are push gloves designed for use by manual wheelchair users. The glove has open fingers, a half thumb, and wrap-around design. Padded in palms and wrist, it is made of 100 percent leather with, and it is available with a leather or non-slip rubber grip surface. It has dual Velcro closure with 3 inches of Velcro to allow for a secure fit. COLOR: Black.

Push Ease Full-Finger Gloves

Push Ease Full-Finger Wheelchair Glove are push gloves designed for use to protect the hands of manual wheelchair users. These general purpose wheelchair gloves protect the most vulnerable areas of the hand from blisters and injury while propelling a wheelchair.The gloves have full fingers with gel padding at the most crucial areas of the hand and removal tabs to assist in taking gloves off. Machine washable. SIZES: XX Small, X Small, Small.

Push Ease Half-Finger Wheelchair Gloves

Push Ease Half-Finger Wheelchair Gloves are push gloves designed to protect the wearer's hands while propelling a wheelchair. These gloves have gel-padded palms, partial finger coverage, and removal tabs to assist in taking gloves off. The gloves are machine-washable. SIZES: Small for hands 2 5/8 to 3 1/8 inches wide, medium for hands 3 1/8 to 3 5/8 inches wide, large for hands 3 5/8 to 4 1/8 inches wide, extra large for hands 4 1/8 to 4 5/8 inches wide.

Push Handle Extensions

CUSTOM ADAPTATION PURPOSE: To enable a tall parent to push a child's wheelchair. The existing pish handles were sawed off the chair and new ferrules were fixed inside the exposed tubes with Loc-tite. Two new L-shaped handles were fashioned from metal tubing and one end of each was fitted into the new ferrules. The new handles were painted red to match the rest of the chair and finished with rubber bicycle-style handgrips. TITLE: Bicycle and Beyond. JOURNAL: TAD Journal. REF: Volume 26, Number

Pushon Treadmill

The PushOn Treadmill is a treadmill for wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The user can roll onto the treadmill's low profile deck using a removable ramp, and attach the wheelchair to two safety straps. Speed ranges from 0 to 15 miles per hour and grade ranges from 0 to 15%. Cadence feedback is also available on the display screen. In addition to people seated in wheelchairs, this treadmill also can be used by individua

Pushtracker

---- PROTOTYPE --------- PURPOSE: To create a prototype tracking device (PushTracker) to monitor activity levels of individuals with lower extremity and mobility disabilities, spinal cord injury and others who use manual wheelchairs. The PushTracker allows manual wheelchair users to monitor their activity on an hourly, daily, and monthly level and includes data on average cadence, push distance, and total number of pushes. This device allows a manual wheelchair user to measure how he or she push

PVC Wheelchair,(1 inch Pipe)

PVC Wheelchair, (1 inch Pipe) is designed for use by individuals with limited upper and lower extremity mobility associated with cerebral palsy, dystonia or developmental delays.  It is not intended to support individuals weighing more than 200 pounds due to the structural integrity of the PVC, and bending of the axle. However, the axle can be modified to be larger, (this is recommended).

Qr Series (Model 2058-34)

The QR Series 2058-34 is an adult manual drive wheelchair. FRAME: The folding frame is made of hardened steel with an endruro coat high lustre finish. The frame weights 34 pounds without the footrest. The overall width of the frame is 25 inches. Stainless steel, screw attached clothing guards are standard. From the basic 2058 frame style, a complete line of twenty-four different wheelchairs are available. SEAT: Seat width 18 inches, seat depth 16 inches, standard back height 16 inches. The QR Se

Quad Care Attaching System (Model 31878)

The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta

Quad Glove (Model Qg01)

The Quad Glove, model QG01, is a push glove designed for use by individuals with spinal cord injury or severe physical disabilities. This wheelchair glove opens up, allowing fingers to slide right in, and folds over the hand, securing with Velcro. Especially designed for wheelchair use, it features drum-dyed leather, soft enough for flexibility, yet strong and durable for tough wear. It extends up to the inside of the wrist to protect this sensitive area and is padded in all critical areas with

Quad Gloves With Rubber Palms

Quad Gloves are push gloves designed for use by individuals who use manual wheelchairs. These fingerless gloves fully open, enabling the fingers to slide in, folds over the hand, and secures with Velcro. The drum-dyed leather gloves are flexible and extend up the inside of the wrist for added protection and are padded with closed-cell foam at critical areas to prevent friction burns and nerve irritation. Technologically advanced rubber is sewn into the palms for gripping and protection. SIZES: E

Quad Push Cuff

Quad Push Cuffs are rubber crepe fingerless gloves with thumb flaps and a Velcro closure. The material covers the heel of the hand and the base of the thumb. SIZES: Universally sized (one size fits all); may be trimmed with scissors.

Quad-Link Retractable Mount.

The Tarsys Quad-Link Retractable Mount is a joystick holder designed to provide wheelchair users with broader access to tables and desks. This link system allows the user to independently retract and move the joystick nine inches back from its normal driving system. It is also designed to maintain correct joystick orientation to allow the user to maneuver the wheelchair with the joystick in a fully retracted position. The link system is adjustable in order to accomodate the strength and ability

Quantum Dynamo

Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes a

Quantum Dynamo Ats

Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Syn

Quantum Runner

The Quantum Runner is a lever drive wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is designed for indoor and outdoor use and can handle a variety of terrain, including dirt paths, grass, and hills. It provides forward propulsion with the push and pull of its lever. This ergonomically correct positioning allows the user to sit in the upright position and change gears depending on the power needed. In most circumstances, the chair is used i

Quick Caddy Beverage Holder

The Quick Caddy Beverage Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs or walkers. This device consists of a strong stainless steel cage which mounts on any vertical or semi-vertical tube, rail, or pole using the attached flexible plastic mount with a hook-and-loop strap. The product comes with a foam "cozy" which securely holds soda cans or small water bottles. Without the cozy, the cage can carry larger 16-ounce glasses or larger water bo

Quick Cage Water Bottle Holder

The Quick Cage Water Bottle Holder is a wheelchair drink holder or cup holder designed for use by individuals who use wheelchairs, walkers or crutches. This stainless steel water bottle cage mounts to any vertical or horizontal tube, rail, or pole using an attached flexible plastic mount and a hook-and-loop strap. The unit includes a 21-ounce water bottle with the Twofish unlimited insignia.

Quick Release Back (Model 102-7000)

Solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. Bracket has a latch that pivots for easy quick release. Comes with multi-adjustable brackets. Backs are cut to fit between the rails.

Quick Release Mount (Model Qrm-2)

The Quick Release Mount, model QRM-2, is an accessory for mounting communication devices on wheelchairs. The mount holds the device firmly, yet allows removal with a flip of a lever. The mount is standard on most Prentke Romich mounting systems. OPTIONS: Adapters are available for Prentke Romich devices that use mounts from earlier wheelchair communication mounting kits, or any other mounting system using a 7/8 inch bar.

Quick Release Seat (Model 101-7000)

Solid seat, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. The bracket has a latch that pivots for easy quick release. Seat comes with multi-adjustable brackets. Seats are cut to fit between the rails.

Quickie 2

The Quickie 2 is a manual drive, ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths include 10, 11, 13, 14, 15, and 17 inches. Seat widths are .5 inch n

Quickie 2 Kids

The Kids Quickie 2 is a child's manual lightweight wheelchair designed to accommodate growth through its modular component system. FRAME: Folding anodized aluminum frame with a choice of straight or rounded rear side frame. The frame widths range from 11 to 20 inches in regular, long, hemi, and hemi long configurations. Anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths

Quickie 2Hp

The Quickie 2HP is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding anodized aluminum frame with a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths. Optional seat depths

Quickie 2Hp Titanium

The Quickie 2HP Titanium is a manual drive, high-performance ultralight adult wheelchair. FRAME: Folding titanium frame with titanium hardware in a choice of a 60- or 70-degree fixed front frame and rounded or straight rear frame. The frame widths range from 11 to 20 inches in kids, regular, long, or short configurations. Anti-tip tubes and impact guards are optional. The frame is available in 11 standard colors and 6 custom colors. SEAT: The standard seat is available in 12- or 16-inch depths.

Quickie Ex

The Quickie EX is a lightweight, sports wheelchair custom built to user specifications. FRAME: A choice of a 16- or 18-inch frame is standard. Optional 14-, 15-, and 17-inch widths are also available. A choice of red, blue, or black frame colors is standard. Eleven optional colors are also offered. Anti-tip tubes are optional. SEAT: Standard seat widths are 15.5 and 17.5 inches. Optional widths include 13.5, 14.5, and 16.5 inches. The backrest is available in 14- and 17-inch heights. Optional pu

Quickie Gp And Quickie Gpv

The Quickie GP and Quickie GPV are lightweight adult manual wheelchairs for sport and daily use. FRAME: One-piece rigid frame with a 70-degree front frame bend. The standard frame is 10 inches high in the front and 9 inches high in the rear. Optional short, tall, and custom frames are also available. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 6 optional colors

Quickie Gp Swing-Away

The Quickie GP Swing-away is a lightweight adult manual wheelchair for sport and daily use. FRAME: One-piece rigid frame. The standard frame is available in 14- or 16-inch widths; 12-, 13-, 17-, 18-, 19-, and 20-inch widths are available at an extra charge. This chair is available in 11 standard and 3 optional colors with black chair parts. Rear anti-tip tubes are optional. SEAT: The seat is .5-inch narrower than the frame. A 14- or 16-inch deep seat is standard. Optional 15-, 17-, or 18-inch

Quickie Gps & Quickie Gps Ti

The Quickie GPS and Quickie GPS TI are lighweight sports wheelchairs designed for daily or sports use. FRAME: The frame is offered in a coice of widths from 14 to 20 inches. The standard frame height is adjustable 17 to 20 inches in the front and 14 to 20 inches in the rear. An extra-cost tall option provides a frame height of 18 to 21 inches in the front and 16 to 21 inches in the rear. The frame is available in a choice of 11 standard and 6 optional colors. Anti-tip tubes are optional. SEAT:

Quickie Kidz

The Quickie Kidz is a lightweight child's manual wheelchair available in standard or reverse configurations. The reverse figuration features the large wheels in front. FRAME: This rigid frame chair is available in 10-, 11-, 12-, 13-, and 14-inch widths. This chair is available in a choice of regular frame length (8, 9, or 10 inches) or a long frame (11, 12, 13, or 14 inches). A choice of 11 standard and 3 custom frame colors is available. Rear anti-tips are standard and front anti-tips are avai

Quickie Lx

The Quickie LX is an adult lightweight wheelchair designed for use by people with mobility disabilities. FRAME: Folding frame in a choice of eleven standard colors and three optional colors. The standard frame is available in a choice of 14-, 16-, or 18-inch widths; optional 12-, 13-, 15-, 17-, or 19-inch wide frames are available. Front or rear anti-tips are optional. SEAT: Standard seat depths are 14 or 16 inches; optional depths are 12, 13, 15, 17, or 18 inches. The seat width is .5 inch narr

Quickie M6 Bariatric Wheelchair

The Quickie M6 is a bariatric folding adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 26 x 20 inches. The frame is high- strength steel with interchangeable frame components that allow the chair to be adjusted for the rider’s changing needs. This chair is available in 18 different colors. SEAT (LxW): 18 to 22 x 22 to 30 inches. The floor-to-seat height is 17 inches. CASTERS: 5 to 8 x 2 inch front casters. WHEELS: 24-inch rear wheels

Quickie P-220

The Quickie P-220 is a powered wheelchair designed for individuals with severe physical disabilities, spinal cord injuries, and mobility disabilities. FRAME: Overall width 24.75 inches and 27.75 inches. The frames are available in a variety of colors. CONTROLS: Integral joystick controller provides digital speed and tilt-control. Breath control, chin control, penta switch, and proportional head control are available. Available single switch controls include the Buddy Button (see separate entry),

Quickie P-222 Se

The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are a

Quickie P100 And Quickie P110

The Quickie P100 and Quickie P110 are powered adult wheelchairs. FRAME: The P100 features a rigid, non-folding frame and the P110 has a folding frame. Frames are available in a choice of 14-, 16, and 18-inch widths. The P100 is also available in a 20-inch frame at extra cost. Both models come in a standard choice of blue, black, or red finishes; 11 optional colors are also available. CONTROLS: Integral joystick control with a choice of right or left mounting. A heavy-duty remote and swing-away r

Quickie P190

The Quickie P190 is a powered wheelchair designed for adult users. FRAME: The rigid frame is available in a choice of 11 standard colors and 3 optional colors.The standard frame is available in a choice of 16 or 20 inches wide; a 20-inch frame is available at an extra charge. Anti-tip tubes are standard. CONTROLS: A remote joystick with programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty control

Quickie P200

The Quickie P200 is a powered wheelchair designed for adult users. FRAME: The standard frame is available in 16- and 18-inch widths. 14-, 15-, 17-, 19-, and 20-inch frames are available at an extra charge. A long frame is also available. The frame is available in a choice of 11 standard colors and 6 optional colors. Anti-tip tubes are standard. CONTROLS: A remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Spec

Quickie P210 Power Recline System (Prs)

The Quickie P210 is an adult powered reclining wheelchair designed for indoor or outdoor use. FRAME: The frame is available in 16- and 18-inch widths in regular and long configurations and is available in a choice of 11 standard and 6 optional colors. CONTROLS: A programmable remote joystick with a programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty controls are also available. This chair is als

Quickie P300

The Quickie P300 is a powered wheelchair designed for adult users. FRAME: The overall frame width ranges from 24 5/8 inches to 28.25 inches depending upon the seat width and caster size. The regular frame is 33 inches long and the long frame is 35 inches long without footrests. The frame is constructed of tri-cell reinforced rectangular tubing and is available in a choice of 11 standard colors and 3 optional colors. The frame constructions allows components and accessories to be bolted directl

Quickie P320

The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-

Quickie Recliner

The Quickie Recliner is an adult or child manual drive wheelchair with reclining backrest. FRAME: Folding aluminum frame available in 11 standard and 3 custom colors. Frame widths available in 14 to 20 inches in 1-inch increments. The chair is 12.5 inches wide folded. The frame is available in kids, regular, and long configurations. Anti-tip tubes are included. SEAT: The reclining back is 24 inches high, includes a 10-inch headrest extension, and has infinite positioning capability within a 70-d

Quickie Revolution

The Quickie Revolution is a lighweight sports wheelchair designed for daily or sports use by adults. FRAME: Alternative compact folding 75-degree front frame. The frame is available in 14 to 20 inch widths and is offered in a choice of 11 standard and 3 optional colors with black chair parts. Anti-tip tubes are optional. SEAT: The seat is available in depths ranging from 14 to 18 inches in one-inch increments. See widths are .5 inch narrower than the frame width. A folding, height-adjustable ba

Quickie Rhythm M5 Power Chair

The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in

Quickie T45

The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2

Quickie Ti All Court

The Quickie Ti All Court is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Titanium frame with a center-of-gravity adjustment range of 3.5 inches and a lightweight single-wing bumper. This chair also features a fifth wheel anti-tip brace. An optional stand-up bumper is available. SEAT (LxW): 10 to 20 x 12 to 20 inches. The seat is outfitted with a ratchet-style positioning belt featuring two sets of locking ratchet-clamps. An optional

Quickie Ti Titanium

The Quickie Ti Titanium is an ultra-lightweight rigid chair designed for use by active individuals with lower extremity disabilities and mobility disabilities. FRAME: Titanium alloy with over 4,000 different frame configurations. Each frame can be customized in areas of frame angle (70 degrees, 80 degrees, 85 degrees) and frame inset (1 inch, 2 inches, 3 inches). A fold-down back, an L- shaped frame, and an extremely low frame weight facilitate vehicle transfers. Fold down push handles are stan

Quickie Triumph

The Quickie Triumph is a lighweight sports wheelchair designed for daily or sports use by adults. FRAME: Features a choice of a 75- or 85-degree front frame. The squeeze frame is available in 14 to 20 inch widths. Short and tall configurations are available at an extra charge. The frame is offered in a choice of 11 standard and 6 optional colors with black chair parts. Anti-tip tubes are optional. SEAT: The seat is available in depths ranging from 14 to 18 inches in one-inch increments. See widt

Quickie Ts

The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on th

Quik Mount (Model M1015)

The Quik Mount, model M1015 is a mounting clamp designed for attaching head supports to wheelchairs. This bracket provides a quick and easy way for clinicians to attach head supports to wheelchairs for evaluation purposes. It can also be used on chairs that have sling style back upholstery.

Racing Wheelchair Stabilizer

DO IT YOURSELF ENTRY --- PURPOSE: To facilitate transferring a child to a racing wheelchair. The unit has a plywood base with a pipe frame at the front to hold the front wheel; the front wheel is further secured with a Velcro strap. This stabilizes the racing wheelchair for ease of transfers in and out with one person assisting. The half-inch thick plywood base is made to the size of the wheelchair, and excess material is removed to create a lighter weight base. The pipe frame consists of one-in

Rackety's Two Halves Classic Trench Coat

Rackety's Two Halves Classic Trench Coat is designed for use by individuals who use a wheelchair or a scooter for mobility.  It is a full-length trench coat with a removable back panel so that the user doesn't have to sit on excess material while using a wheelchair or a scooter. The coat is in a classic neutral color and is quilted for warmth. The sleeves of the coat can be wiped clean and the coat can be machine washed.

Rally

The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control

Ram Mounts Ez-On/off Flexible Seat Clamp Mount

The RAM Mounts EZ-ON/OFF Flexible Seat Clamp Mount is a stand for a tablet computer, cell phone holder and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. This mount consists of a universal mount with clamp and 2.5-inch diameter ball base, an 18-inch flex rod, a single socking mounting system, and a custom high strength composite non-locking cradle holder for the

Ramp To Tilt Wheelchair To Comfortable Eating Position

CUSTOM ADAPTATION PURPOSE: To enable an individual with cerebral palsy who uses a wheelchair with tilt-in-space seating to eat independently. The user's disability prevents upright sitting, so a low-level ramp was constructed to raise the wheelchair's rear wheels. Seventeen millimeter lightweight plywood was used to construct the sloping portion of the ramp, and five slats of 50 x 25 millimeter wood were used to fashion a gutter to hold the rear wheels in place. The same type of wood was used t

Ranger Ii - Rm900 Series

The Ranger II - RM900 Series is an adult powered wheelchair for everyday use. RWD: "Free-n-Easy" clutch system. CONTROLS: MCC RIIA Electronics with inductive joystick, 10 function performance menu, full self diagnostics capability, speed selector knob, optional easy remote programmer, an on-demand braking system for braking downhill, a circuit breaker, and automatic correction circuits to evenly maintain speed. SEAT: Seats width 14, 16, 18 & 20 inch widths. Seat depth 16 inches. Seat height

Rear View Mirror For Scooter

The Rear View Mirror for Scooter is designed to create greater visibility for scooter users without requiring that the rider turn his/her head or body. This adjustable unit mounts to the end of the scooter handlebar and has a plastic base and a glass mirror. DIMENSIONS: The mirror is 3.5 inches in diameter. WEIGHT: 1 pound.

Recharge

The ReCharge is an alternative power connection for powered wheelchairs designed for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a powered wheelchair. It is intended to help a wheelchair user to more easily connect the powered wheelchairto a battery charger. This product features a long mast topped with a large circular handle that drops into a socket mounted on the wheelchair. The unit can be used with sockets mounted for the ReJoy or JoyBa

Reclining Arms (Models 07-A & 07-B)

Arms attach to backpost of reclining wheelchair to maintain a position relative to the position of the body when reclined. Allows chair controls to move with the arms during the recline. LaBac Systems arm troughs and pads can be mounted on the arms. Arms are strong enough to hold a lap board. Model 07-B ($395) features a quick release mechanism which allows instant removal of armrests.

Recluse

The Recluse is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheel has a twin bent Gothic spoke design that is repeated 5 times around the wheel to resemble a 10-legged spider sitting in the wheel. The wheel is available with a mirror-polished finish or in any of 5 anodized colors, allowing the wheels to be coordinated with the wheelchair frame. The wheel is CNC precision machined from aircraft quality aluminum

Rehadesign Gel-Palm Wheelchair Gloves

RehaDesign Gel-Palm Wheelchair Gloves are push gloves designed for use by individuals who use wheelchairs. Designed to diminish impact force to the hand, these wheelchair gloves have half fingers and an enclosed thumb and are made from quality soft leather with gel padding built into the palm. They have a terry sweat-wipe backing. SIZES: Small, medium, large, and extra large.

Rehadesign Ultra-Grrrip 4 Seasons Wheelchair Gloves

RehaDesign Ultra-Grrrip 4 Seasons Wheelchair Gloves are push gloves designed for use by individuals who use wheelchairs. Suitable for all-weather use, these full-fingered leather gloves have a textured palm for improved grip. SIZES: Small, medium, large, and extra large.

Rehadesign Wheelchair Tire Covers

RehaDesign Wheelchair Tire Covers are wheelchair tire covers designed for use by individuals who use wheelchairs. Also known as wheelchair slippers and esigned to prevent tracking in dirt and debris from the wheels, these covers stretch to fit standard wheelchair rear wheels. They can cover the tire only or the tire and the handrim. The can be put on without leaving the wheelchair and can also be used to protect wheels and handrims from damage during transport. They have a soft artifical suede f

Rehadesign Wheels On Fire Spoke Reflector

RehaDesigns Wheels on Fire Spoke Reflectors are reflectors for wheelchair spokes designed for use by individuals who use wheelchairs. These reflectors are designed to increase visibility at night. These reflectors snap on to spokes up to two millimeters in diameter.

Rehadesigns Spoke Guards

RehaDesign Spoke Guards are spoke protectors designed for use by individuals who use wheelchairs. Designed to protect fingers from the wheel spokes, these screen-printed guards attach with a choice of 12 nylon zip ties or 12 snap-on connectors (both included). The spoke protectors are available in a choice of five designs: butterflies, puppies, kittens, planets, or woman. DIMENSIONS: Available for 20-, 22-, or 24-inch wheels.

Rejoy

The ReJoy is a powered wheelchair controller designed to enable powered wheelchairs to be controlled with a joystick positioned in the front of the seat at the midline rather than on the right or left armrest. The ReJoy utilizes a Center Drive System that consists of mounting hardware and a socket that can be mounted in three positions: in front of the seat on the center line; on the side beneath either armrest; or in the back of the wheelchair. When mounted on the side, the mast with the contro

Releasing Wheelchair Hubs

Heavy duty, wheelchair hubs, provide quick change of wheels or release for transport by pushing one button on outside end of hub. Aluminum flange for spokes, 48 mm. Standard 36 holes or other spoke drillings. Built for 14 gauge light spokes, larger drilling available for heavier spokes. Precision ball bearings, permanently adjusted and lubricated, waterproof.

Removable Commode (Model 90)

The Removable Commode, model 90, is a commode seat attachment for wheelchairs. It come with a removable solid insert with a cushioned cover to placed on top of the commode when not in use. The pan is removable from the back. DIMENSIONS: Fits 16- and 18-inch wide chairs.

Renegade All Terrain Wheelchair

The Renegade All Terrain Wheelchair is an all-terrain lever-drive wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is available in standard, hunting, and winter models. The hunting model includes a gun rack/rest, mobile blind, and fishing pole holder. The winter model includes snow chains and front skis that are interchangeable with the front casters. FRAME (LxW): The 1.25-inch aluminum frame with left and right front and rear accessory rec

Reps Wheelchair Gloves (Model Wh-1)

REPS Wheelchair Gloves, model WH-1, are push gloves designed for wear by wheelchair users. These gloves have three-quarter length fingers and thumb and are made of tough suede padding to protect the hand's main contact points with the wheel. The gloves have terrycloth lining on the inside of the palm for additional protection and comfort.

Reps Wheelchair Gloves (Model Wh-2)

REPS Wheelchair Gloves, model WH-2, are push gloves designed for wear by wheelchair users. These gloves have a three-quarter length thumb and no fingers. Made of soft leather with a nylon spandex back, these gloves have tough suede padding to protect the hand's main contact points with the wheel and a terrycloth lining on the inside of the palm for additional protection and comfort. SIZES: Small, medium, large, or extra-large. COLOR: Black.

Reps Wheelchair Gloves (Model Wh-4)

REPS Wheelchair Gloves, model Wh-4, are wheelchair push gloves designed for use by individuals with limited hand mobility. These wrap-around gloves are made of durable suede leather with padding to protect the hand's main contact points with the wheel.

Reps Wheelchair Gloves (Model Wh-5)

The Reps Wheelchair Gloves, model WH-5, are wheelchair push gloves designed for use by individuals who use wheelchairs. These gloves have full-length fingers and thumb and are made of durable suede leather with padding to protect the hand's contact points with the wheel.

Resident-Release Three-Point Wheelchair Belt (Models 610210 & 610215)

The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.

Retractable Headrest System (Models 06-1 & 06-1S)

Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding

Retracting Joy Stick.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Retractable joy stick control box for a powered wheelchair to allow the chair to be positioned near a table. Briefly describes a springloaded automatic joy stick box retractor which permits the box to recede as it makes contact with the table and return to its normal position when the wheelchair is backed away. Principal investigator: Theresa Ackerman, Georgia Tech University. SKILLS REQUIRED: Mechanical Engineering. TITLE: Retracting Joy Stick JOURNAL

Retro Swing Armrest Bracket

The Retro Swing Armrest Bracket is a wheelchair armrest bracket that will convert a fixed armrest that attaches to the seat back frame to a lateral swing away armrest. It is designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. This system allows the armrests to swing up to 270 degrees horizontally. This can be particularly useful for form-fitting curved trunk laterals and wide armrest pads, as well as for

Retroback

The Retroback is a foam wheelchair back support designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. This cushion is lightweight and durable and is equipped with a chrome-plated steel clip that attaches to the existing sling upholstery. Removing the Retroback is done by simply lifting it off the upholstery. The cushion also features a nylon/polyester water-resistant, machine-washable cover. DIMENSIONS: Available in 16, 18, or 20 inch

Retrolift

The RetroLift is an elevating seat attachment for a wheelchair designed for use by people with lower extremity and mobility disabilities and spinal cord injury and others who use a wheelchair. It will vertically raise a person seated in a wheelchair up to 17 inches. This product securely attaches to any conventional wheelchair without any special tools, and it comes equipped with a back support, armrests and a plush 2-inch thick cushion. A flat seat pan with Velcro strips is also available to if

Revo 3 Wheel

The Revo is a compact three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 43 x 21.5 inches with a 30.5-inch wheel base. The turning radius is 38 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip

Revo 4 Wheel

The Revo 4 Wheel is a compact four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 44.75 x 21.5. The turning radius is 50 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt d

Rgk Basketball Wheelchairs: Performance, Quattro, & Interceptor

RGK Basketball Wheelchairs are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. Three models are available. The Interceptor has a single component monoframe with an integral camber bar and footrest, the Quattro has a two component frame with a camber bar, and the Performance has a three component frame with a camber bar and a footrest.

Rgk Tennis Wheelchairs: Grand Slam 1, Grand Slam 2, & Grand Slam 3

RGK Tennis Wheelchairs, models Grand Slam 1, Grand Slam 2, and Grand Slam 3, are sport wheelchairs designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. A tool kit is included with these chairs. FRAME: Chrome moly or titanium frame in an open or closed design. Features include an integrated or variable position camber bar and a choice of integrated or quick- release anti-tips. Side guards and special frame finishes are optional. UPHOLS

Rhino Tray (Models 11A & 11B)

The Rhino Tray, models 11A and 11B, is a wheelchair lapboard and work tray for children and adults with lower extremity and mobility disabilities, spinal cord injury, and others who use wheelchairs. PolyLock Fasteners incorporated in design eliminating the need for screws or bolts in the tray surface.. Corners and edges are fully rounded for safety, and the tray tops can be snapped off in an emergency. Custom stomach and control box cutouts available. OPTIONS: Available with Telescoping Mount Ha

Rifton Dynamic Stander

The Rifton Dynamic Stander is a mobile prone stander that provides independence and standing mobility for individuals who use wheelchairs. Additionally, the mobile stander helps strengthen one's motor skills so a user can progress toward independent standing.

Roadrunner Ss

Roadrunner SS is a three-wheeled racing hand propelled cycle designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. Standard features include a 21-speed hub, a front 559 heat-treated wheel, and 20-inch rear wheels. The aluminum frame can be taken apart for travel. The cycle comes with custom length, height, width, and positioning. Other custom features are available on request, including carbon wheels and tubular tires. COLOR: Custom

Robocup

The RoboCup is a cup, can or drink holder designed for use by people who use a walker, wheelchair or mobility scooter and other individuals with a disability that affects their ability to hold or grasp objects. This portable dual caddy can securely hold two drinks, two fishing poles, tools, gear and personal belongings such as a telephone, keys, glasses and flashlight. The unit attaches to wheelchairs, walkers, scooters, grab bars, hospital beds or golf carts using the integrated clamp. The Robo

Robot Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a robotic wheelchair that can climb over steps for individuals with mobility or lower extremity disabilities or spinal cord injury. A group of researchers from Chiba Institute of Technology led by Shuro Nakajima have designed a robot wheelchair that is capable of climbing over steps. The robot wheelchair has four-wheel drive and five axes to overcome a previously insurmountable obstacle for regular wheelchair users. The user navigates wi

Robotic Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a robotic wheelchair to assist aging individuals and those with mobility disabilities in to move about while out shopping in public. Researchers at ATR Intelligent Robotics and Communication Laboratories as part of their Ubiquitous Network Robot (UNR) project have created a prototype of a robotic wheelchair that relies on innovative platforms such global positioning system (GPS) navigation, sensor networks, and mobile devices to have the

Rochair

The RoChair is a lever drive wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It combines rowing-style propulsion with bicycle-style steering. To propel the chair, the user pushes forward and pulls back in a rowing motion on the front-and-center mounted handlebar. To steer, the user turns the handlebar in the desired direction. The RoChair features 8-speed hub gear with grip shift and internal gearing and it has a low center of grav

Rock & Roll Mobile Rocking Chair

The Rock & Roll Mobile Rocking Chair is a rocking chair with a seating system and transport wheelchair designed to for use by adults with with balance, lower extremity, mobility or walking disabilities and others who cannot stand for long periods of time and must sit for significant periods. FRAME (LxW): 32.28 x 21.65 inches. The rocking mechanism of the Rock & Roll chair can be activated by the user or an attendant, and it is intended to alternate pressure points to reduce the risk of d

Rock’n Roller

---- PROTOTYPE --------- PURPOSE: To create a prototype of a motorized sensory platform for a high school student with shaken baby syndrome to allow her to enjoy movement and music independently. The young woman has severe cognitive, visual, and physical disabilities and poor muscle coordination. She can only voluntarily control her head and right hand. She spent most of her time in a manual wheelchair and was unable to propel herself. Her teachers were unable to give her constant 1-on-1 attenti

Rocket

The Rocket is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Non-folding automotive-style steel unibody construction with optional tie-downs for transport. The chair is 24.75 inches wide. The chasis is available in ocean spray speckle, flaming rocket red, four seasons green, or black. CONTROLS: Fully programmable touch button controls with joystick-style steering. The controls can be right- or left-mounted and switched as needed. The controls can be exten

Rocking Chair Adapter For Wheel Chair

CUSTOM ADAPTATIONPURPOSE: To make it possible for a wheelchair to absorb the shocks from the involuntary backward and forward movements of a girl with cerebral palsy. This girl has broken parts of her chair several times previously. Instead of building a special rocking chair, it was decided to convert the wheelchair itself into a rocking chair. A device was built using 6-millimeter thick aluminium plate rolled to a suitable curve. The chair can be rolled onto the device and tied down. The devic

Rockstar Guitar Stand

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a customized guitar stand that attaches to a wheelchair for an adult male with cerebral palsy. The Rockstar guitar stand provides a safe and durable attachment for the user’s wheelchair which supports his electric guitar and keyboard. The device attaches to the armrest supports of the wheelchair and allows for adjustment of the guitar platform to the most comfortable position for the user. When brainstorming design ideas it was decided that

Rodem "sci-Fi" Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a electric wheelchair that resembles a scooter to offer greater mobility to individuals with mobility disabilities (i.e. wheelchair users, etc.). Created by robotics and medical experts in Japan, the four-wheeled Rodem allows users to ride astride, compared a conventional sitting wheelchair. The user can steer with a joystick, hold onto motorbike-style handles while the knees and chest rest on cushions. This design allows user to easil

Rodeo 12 / 14 / 16

The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment.

Rogue And Rogue Xp

The Rogue and Rogue XP are lightweight adult wheelchairs designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The Rogue and Rogue XP have an aluminum frame made of ultra-stiff 1.375-inch tubing to help dampen vibration and enhance responsiveness. The frame features infinite center of gravity (CG) adjustment over a 6-inch range forward of the backplate, and it has a locking fold-down back with an integrated locking mechanism fo

Rogue Ttl And Rogue Ttl Xp

The Rogue TTL and Rogue TTL XP are lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The Rogue TTL and Rogue TTL XP have an aluminum frame made of ultra-stiff 1.375-inch tubing to help dampen vibration and enhance responsiveness. The frame features infinite center of gravity (CG) adjustment over a 6-inch range forward of the backplate, and it has a locking fold-down back with an integrated locki

Roho Cushion Retainer

Nylon mesh and webbing device fastened into existing wheelchair seat and back upholstery screw locations to keep cushion from sliding back on seat. Adds very little weight to chair. Designed to fit most standard size wheelchairs.

Roho Universal Cushion Cover With Pocket

The Roho Universal Cushion Cover with Pocket is a cushion cover with under seat pocket designed for use by wheelchair users. The cover has a durable stretch Lycra top and the side material is three-layer knit polyester spacer fabric which provides air circulation and cools the user. The attached pocket can be used to store small items such as wallets, keys, glasses, or coins. DIMENSIONS (HxWxD): Available dimensions range from 11 to 18 x 11 to 18 x 1 to 4 inches. WARRANTY: 6 months.

Rolleez All-Terrain Beach Wheelchair

The Rolleez All-Terrain Chair is a beach wheelchair designed for use by individuals with lower extremity and mobility disabilities and spinal cord injury. This beach wheelchair features an eight-panel beach umbrella. FRAME (HxLxW): 41 x 41 x 34.5 inches. The freame disassembles into two pieces for storage and transport in the included bag. SEAT: Cushioned seat with safety belt.The seat is 25 inches high. BRAKES: Single-motion parking brakes. WHEELS: Four high flotation wheels with non-corrosiv

Rollermobile For Children With Cerebral Palsy.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheeled roller seat for use by severely involved elementary school-aged children with cerebral palsy. Describes construction of a feet-propelled wheeled vehicle made of plywood, 1/8 inch pliable plastic, 5 inch platform casters, padding and vinyl for the seat, 3 automobile seat belts and velcro. The seat is triangular with wings for support. Trunk and hood are made of boxes. The seat belts are used to secure the child's pelvis and to hold the thighs in

Rolls 2000 Lt Series

Adult manual drive wheelchair. Folding aluminum frame. Epoxy coated finish. Vinyl upholstery. 16 or 18 inch seat width. 16 inch seat depth. 18 or 20 inch seat height. Back height 14, 16 or 18 inches. 24 inch mag style rear wheels with solid or pneumatic tires. 8 inch front casters with solid, pneumatic or semi-pneumatic tires. Fixed or adjustable height armrests, full or desk length. Swing-away removable footrests. Optional elevating footrests. Wheel locks. Weight without footrests, 27 to 30 pou

Rollz 2-In-1 Transporter

This Rollz 2-in-1 Transporter is designed for individuals who find it difficult to walk but can walk with the proper walking aid. This 2-in-1 transported is a walker and a wheelchair. The handles turn around to where they are supposed to be for an aid whom pushes the wheelchair. The handles turn back around to where they are supposed to be for using this product as a walker. It crosses doorsteps and curbs easily. Folds up easily to pack in the trunk or closet. Front wheels swivel 360 degrees. Fo

Rolyan Slide-On Adjustable Lap Tray (Model A707001)

The Rolyan Slide-On Adjustable Lap Tray, model A707001, is a molded-plastic lapboard designed for use by individuals who use wheelchairs. This tray is equipped with bases that fit over the upholstered armrests of a wheelchair to help prevent tipping. The tray is designed to fit wheelchairs from 16 to 20 inches wide with standard or desk-length arms. The bases can be adjusted to fit with an allen key. OPTIONS: Back strap, model A3173. DIMENSIONS (WxD): 23.5 x 21.5 inches

Rolyan Workhard Open Finger Glove (Models A38257 To A38268)

The Rolyan Workhand Open Finger Glove, models A38257 to A38268 is a glove designed to absorb shocks and vibrations for persons with arthritis or other neurological disabilities. Constructed of leather with Sorbothane lining and a Lycra back side, the washable glove is available for the left or right hand. SIZES:: To determine size, make a loose fist and measure the circumference of the hand just below the knuckles. Extra extra small is up to 7 inches wide; extra small is 7 1/8 to 7.75 inches wid

Roscoe Knee Scooter

The Roscoe Knee Scooter is designed for individuals recovering or who suffer form a foot or ankle injury or post surgery recovery. A knee walker is a rolling, lightweight mobility device that keeps a user's leg elevated while getting around. It offers 360 degrees of freedom and relieves user's other leg of the extra weight they would otherwise have to put on it. Provides an alternative to crutches. Features adjustable hand brakes. HEIGHT: 31 inches-41 inches. WEIGHT: 22.8 lbs. WEIGHT CAPACITY: 3

Rotational Seating System

Seating system rotates in space to 45 degrees, maintaining seated position. For Everest & Jennings and Invacare sectional back, recliner, and powerbase (Lancer, XT). Rotating frame, rigid seat, rigid back, standard headrest, complete armrest and legrest assemblies, arm and leg troughs, underseat module mount standard. Toggle switch control. Legs elevate manually. Back heights up to 25 inches in one inch increments. Underseat 24 volt DC actuator, and bearings on all moving parts. Options: sem

Rough Terrain Guidance System For Powered Wheelchairs

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted wheelchair terrain sensing control system for individuals with mobility disabilities, spinal cord injury and other people who use wheelchairs. This adaptation was inspired by the needs of disabled veteran's for independence and mobility. By using terrain sensing control systems designed for the guidance of autonomous vehicles on the battlefield, researchers at Florida A&M University-Florida State University College of E

Roughrider

The RoughRider is a heavy-duty manual wheelchair designed to for indoor and outdoor use by people with mobility or lower extremity disabilities, or spinal cord injury. Originially designed for use in developing countries, the RoughRider is designed to handle rugged terrain. uneven pavement and some obstacles.

Round Mobility Clutch

The Round Mobility Clutch is a carrying bag designed for use by individuals with lower extremity, mobility, balance and walking disabilities. This oval carrying bag attaches to most canes, walkers, crutches, and wheelchairs or transport chairs with two hook-and-loop straps. The bag has an outside easy-access pocket that features an elasticized top and an interior zippered pocket for storing items such as keys, cell phones or other small items. The bag easily detaches and can be worn on the wrist

Roundabout Chair Available For Another User.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Describes an alternative wheelchair on a low stand, operated with a hand crank. Chair made of an office swivel chair fastened to a heavy plywood base supported on a steel tube frame; there are two fixed wheels in back ( the wheels fit underneath the frame) and one wheel in the front used to steer and propel the chair from post by the rider's knee. A vertical drive shaft motivated by a crankhandle runs down the post and rotates the front wheel through a

Rowheel

---- PROTOTYPE --------- PURPOSE: To design a prototype wheelchair design to reduce repetitive-stress injuries of wheelchair users and those with mobility disabilities. The Rowheel is a manual wheelchair wheel designed for use by people with mobility and lower extremity disabilities or spinal cord injury and others who use a manual wheelchair. Rowheels use "planetary gears" configured to allow the wheels to rotate counter to the hand rim. This allows users to pull on the hand rim to go forward.

Rowheel

---- PROTOTYPE --------- PURPOSE: To design a mechanism used to modify wheelchairs so that the chair is propelled by a pulling action of the arms rather than by pushing for individuals with mobility disabilities and spinal cord injuries. The design is based on the premise that allowing the stronger biceps take on more of the work will result in more endurance and greater control. The Rowheel has similar specifications and appearance to existing manual wheelchair wheels, and the Rowheel is design

Royale 3

The Royale 3 is a 3-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities. This scooter has independent suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat and tiller fold for transport or storage. The Royale 3 has an underbody ground clearance of 6 inches and a turning radius of 49.5 inches. Available colors are burgundy red, midnight black and diamond silver. A detach

Royale 4

The Royale 4 is a 4-wheeled scooter designed for outdoor use by individuals with lower extremity and mobility disabilities or as an alternative to driving. This scooter has independent front suspension and can be used on sidewalks, streets and dedicated paths where permitted. FRAME (LxWxH): 62 x 29 x 53 inches. The seat folds for transport or storage. The Royale 4 has an underbody ground clearance of 6 inches and a turning radius of 63 inches. Available colors are burgundy red, midnight black an

Rug Rat Scooter Board

The Rug Rat Scooter Board is designed to promote neuromuscular development of the muscles in the hand, arm, and neck/shoulder in a prone position for individuals with mobility disabilities. For safety, the swivel casters are inaccessible to the fingers and hands because they are inside the scooter's shell. Other features include a plastic edge protector around the base; a closed-cell foam cushion; and two adjustable, removable nylon positioning belts for chest and thighs. DIMENSIONS (LxHxW): Sma

Runabout & Runabout Tandem

Three wheeled stroller with steel frame. Injection-molded seat. Padded seat cushion. Standard model holds child up to 30 pounds. Safety harness and strap. Padded grab bar. Adjustable aluminum handle which allows cart to be pushed with body for hand freedom. Foam handle grip. Chrome-plated wheels. Balloon tires. Safety wheel discs and disc reflectors. Lightweight. Low center of gravity. Disassembles with removable rear wheels and front fork. Transportable. Standard: 22 inches wide. Overall length

S-115-TP Lightweight Transport Wheelchair

The S-115-TP is a lightweight transport wheelchair designed for use by adults with lower extremity or mobility or spinal cord injury. FRAME (HxLxW): 36 x 36 x (22 or 23) inches. Overall width of the wheelchair is dependent on the seat width selected. The folding frame is constructed of T-6 aircraft grade aluminum. The folding width is 12 inches. The frame color is pearl silver or rose red. Anti-tippers and frog legs front fork suspension are optional. SEAT (WxD): (16, 18 or 20) x 17 inches S-sty

Safari

The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in white, red, hunter green, or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional

Safari Ltd

The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional. UPHOLSTERY: Fabric or vinyl

Safari Tilt Frame, Safari Tilt Basic, & Safari Tilt Anatomical

The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The

Safe T Spin For Disabled Awareness (Model Da-50)

The Saf T Spin for Disabled Awareness, model DA-50, is a safety flag designed for use by individuals who use wheelchairs. This warning signal draws attention to wheelchairs by adding height and motion. Atop a fiberglass rod that attaches to a wheelchair, this rotating signal carries the wheelchair disability and can be seen over the rooftops of vehicles while the wheelchair is crossing intersections or parking lots. A fitting in the middle of the fiberglass rod allows for assembly and disassembl

Safe•t Mate Adjustable Front Anti-Tippers (Model Sm-011)

Safe•T Mate Adjustable Front Anti-Tippers, model SM-011, are anti-tipping attachments designed for use on wheelchairs. These anti-tippers have five height adjustments to accommodate wheelchairs from full height chairs to low hemi chairs. The attachment is made from powder- coated steel tubing and heavy-guage chrome- plated steel with easy gliding wheels. Mounting hardware and installation instructions are included. DIMENSIONS: These anti-tippers fit chairs with frame tubing 7/8 or 1 inch in diam

Safe•t Mate Alarmed Velcro Seatbelt (Models Sm-005 & Sm-005L)

The Safe•T Mate Alarmed Velcro Seatbelt is a wheelchair seatbelt and wandering patient alarm designed for use by wheelchair users with Alzheimer's disease or cognitive disabilities. This Velcro lap belt has a alarm that sounds when the belt is separated to alert caregivers and remind the user to remain seated. The nylon belt features a bright red pull strap to facilitate locating and releasing. The alarm box features a heavy duty on/off switch and a stainless steel universal mounting clip. Horn

Safe•t Mate Sm2 Anti-Rollback Device

The Safe-T Mate SM2 Anti-Rollback Device is an anti-tipping attachment designed for use by individuals who use wheelchairs. This device prevents a wheelchair from rolling back by grabbing the tires as the user attempts to sit or stand. The seat pad has three height adjustments for regular, hemi, and extra-low chairs. The articulating/floating pad moves forward to accommodate users who slouch in their chairs while remaining in proper alignment with the seat bottom. This device is compatible with

Safe•t Mate Universal Fit Rear Anti-Tippers (Model Sm-008)

Safe•T Mate Universal Fit Rear Anti-Tippers, model SM-008, are anti-tipping attachments designed for use by individuals who use wheelchairs. These rear anti-tippers have sliding height adjustment allowing them to fit various makes and models of chairs and to be positioned at different heights. These anti-tips are made from solid bar stock with gliding wheels. Their height is infinitely adjustable within a 10-inch range. DIMENSIONS: 2 foot diameter wheels. WARRANTY: Guaranteed for one year from

Safe•t Mate Wheelchair Labeling System (Model Sm-003)

The Wheelchair Labeling System, model SM-003, is a wheelchair labeling system designed for use on wheelchairs used in facilities with multiple wheelchair users. This product allows staff to manage user-specific wheelchair accessories, such as leg rests or lap cushions. Each chair can be outfitted with a flexible plastic bracket that has a vinyl label. Each label contains spaces for the user name, room number, chair accessories and total chair weight. Each unit contains a set of 10 brackets with

Safety Flag

The Safety Flag is a wheelchair safety flag designed for use by individuals who use power wheelchairs. Designed with extended shaft height coupled with the flag’s high-visibility color and logo, this safety flag is intended to increase visibility while using powered wheelchairs in busy areas or areas that are poorly lit. The flag is made of durable vinyl and is easily removed when not in use. DIMENSIONS: The shaft is six feet long. COLOR: The flag is orange.

Safety Grip Scooter

The Safety Grip Scooter is a floor sitter with casters designed for use by children with mobility disabilities. This sitter is a heavy- duty plastic board with hand holds mounted on four non-marring swivel casters. DIMENSIONS (LxW): 12 x 12 inches. Casters are 2 inches in diameter.

Safety Grip Scooter Board

The Safety Grip Scooter Board is designed for use by children with mobility and balance disabilities. This heavy-duty plastic board features non-marring double ball-bearing swivel casters and molded plastic handles. DIMENSIONS 12 x 12 inches. CAPACITY: 150 pounds.

Safety Grip Scooters (Models T2407 & T1021)

The Safety Grip Scooters are scooter boards designed for use with children with mobility disabilities. Intended for indoor use, these indestructible polypropylene scooter boards have long-lasting twin-wheel, hooded nylon casters and a safety-grip handle on two sides. Model T2407 is a single board in a choice of colors and model 1021 is a set of six boards, one in each of six colors. DIMENSIONS: 12 x 12 inches. COLOR: Red, blue, yellow, green, orange, or purple.

Safety-Soft Security Belt (Models Mdt822125 & Mdt822126)

The Safety-Soft Security Belt is a wheelchair seatbelt designed for use by individuals with cerebral palsy, mobility or neurological disabilities, or spinal cord injury. This seatbelt helps keep wheelchair users upright. The belt has a polyester strap with a thick foam lining to reduce friction on the user's hips. It has bar tacks at stress points and is washable. The one-piece style (model MDT822125) is a single piece of foam that ties behind the back. The two-piece style (model MDT822126) has

Samba

The Samba is an adjustable hi-low, tilt-in-space chair that offers a unique midline support system for children requiring moderate to higher levels of postural control, suitable for both home and school. The midline support system incorporates a 4 point pelvic strap that corrects the position of the pelvis. This improves alignment and helps prevent rotation and backward tilt. The modular system also eliminates the need for knee blocks. Height, width and angle adjustments can all be made easil

Sammon Preston Side Pouch For Wheelchair (Model 6441)

The Sammons Preston Side Pouch for Wheelchair, model 6441, is a wheelchair side pouch designed for use by wheelchair users. Designed for full length arm rest only, this pouch features a blue denim or black vinyl side pouch with full length zipper and 2 large side pockets. DIMENSIONS (HxW): 6 x 13 inches.

Sammons Preston Arm Tray With Foam Elevator (Model A7464)

The Arm Tray with Foam Elevator, model A746-4, is a plastic arm support and trough for use by people with upper extremity disabilities who also use wheelchairs. The unit includes a washable soft foam insert for cushioned elevation that can be trimmed and customized for individual needs. The tray includes straps for attaching the arm tray to the wheelchair. OPTIONS: Replacement foam inserts, model A746-5, are available for use with this or other Smith & Nephew Arm Trays.

Sammons Preston Bright Brakes (Model 6503)

The Bright Brakes, model 6503, are globe-shaped wheel lock extension levers designed for use on wheelchairs of individuals with low vision and grasping disabilities. The size and color of the brake extensions increases visibility while providing a comfortable and easy-to-hold grip. These extensions fit all standard tubular brake extensions (brake extensions sold separetely). COLOR: Blue, teal, or gold metallic finish (no color choice).

Sammons Preston Cup And Holder For Wheelchair (Model 1139)

The Sammons Preston Cup and Holder for Wheelchair, model 1139, is a wheelchair drink holder with cup designed for use by individuals who use wheelchairs. This device attaches to most wheelchairs, canes, and walkers. The unit features a cup with large open loop handle, snap on lid with opening, and two plastic coated spring clips for mounting. Once the attachment clip is installed onto the chair, the cup holder itself can be removed as needed. The cup holds up to 8 ounces of liquid and is dishw

Sammons Preston Elevating Arm Tray Kit

The Sammons Preston Elevating Arm Tray Kit is an arm trough and arm posiiitioner designed for use by wheelchair users who must keep one arm elevated. The tray straps to right or left standard or desk-length wheelchair arms with Velcro and includes a washable foam insert contoured to keep the users arm in the proper position. The unit can be cut to the desired length. OPTIONS: An extra pair of foam elevating inserts ($18.95). DIMENSIONS (LxW): 22 x 4.5 inches. COLOR: The foam is light beige.

Sammons Preston Flipaway Armrests (Models 604401 & 604402)

Th Sammons Preston Flipaway Armrest, models 604401 and 604402 is a armrest designed for use by individuals who use wheelchairs or other seating systems. Features include a heavy duty hinge that allows the arm rest to flip up and out of arms way, a three-inch recess that serves as a beverage or ashtray holder, and a one-inch black vinyl foam padding. The armrest can also be used as a work surface or for transporting small items. Model 604401 is designed for right side attachment and Model 604402

Sammons Preston Hardwood Transfer Board (Models 6113 & 6114)

The Maple Transfer Board models 6113 and 6114 are transfer boards designed for use by people with mobility disabilities. The boards features a highly lacquered finish and tapered ends. DIMENSIONS (DxLxW): Model 6113 is .75 x 24 x 8 inches and model 6114 is .75 x 30 x 8 inches. Both models taper to 1/8 inch at the ends. COLOR: Natural maple.

Sammons Preston Leg Rest Bumper For Wheelchairs (Model A748310)

The Leg Rest Bumper for Wheelchairs, model A748310, is a leg rest pad designed to protect the legs of wheelchair users from coming in contact with leg rest hardware. Made of foam laminated with a hook-and-loop-responsive soft material, these bumpers can be wrapped around leg rest uprights and other areas and can be trimmed to fit. DIMENSIONS: 4 x 15 inches.

Sammons Preston Mini Wheelchair/walker Pouch

The Sammons Preston Mini Wheelchair/Walker Pouch doubles as a carrying bag for a walker and a wheelchair side pouch for use by people with mobility disabilities. The machine-washable nylon pouch snaps over the front walker bar or hangs from the wheelchair armrest. DIMENSIONS (WxH): 10 x 8 inches. COLOR: Gray.

Sammons Preston Modified Deluxe Wheelchair Arm Tray (Model A74612)

The Sammons Preston Modified Deluxe Wheelchair Arm Tray, model A74612, is an arm trough designed for use by individuals who use wheelchairs. Features include a cut-away attachment base designed to allow access to wheelchair brakes while supporting the full length of an arm. The tray can fit either a standard or desk arm chair, and can be used on either the right or left side. Kushionflex padding for comfort and protection is included. DIMENSIONS: The padding is 1/8 inch thick.

Sammons Preston Molded Clear Lap Tray (Model A7073)

The Sammons Preston Molded Clear Lap Tray, model A7073, is a tinted translucent lapboard designed for use by individuals who use wheelchairs. This tray enables the lower extremities to be completely visible. Made of high-impact Lexan, the tray features a molded rim and a recessed space for cups, glasses, bottles, or cans. The tray is equipped with D-ring hook-and-loop straps on the arms and a snap-buckle back strap that fastens on either side of the chair. The arm and back straps attach by threa

Sammons Preston Solid Seat Insert

The Sammons Preston Solid Seat Insert is designed for use in wheelchairs with sling seats. This semi-rigid closed-cell foam insert provides a firm, flat seating surface in sling seats. This surface also helps improve posture by helping to balance the pelvis and distribute weight over the hips and thighs. This insert is available in standard, narrow, or relaxed-fit styles. DIMENSIONS (WxD): The standard model is 18 x 16 inches, the narrow model is 16 x 16 inches, and the relaxed-fit model is 20

Sammons Preston Universal Wheelchair Arm Tray (Model A7468)

The Sammons Preston Universal Wheelchair Arm Tray, model A7468, is an arm trough designed to position and provide arm support for individuals with upper extremity disabilities who also use wheelchairs. The trough features a plastic base that slides over the arm pad of standard or desk-length wheelchair arms and is designed for either the right or left side use. A Kushionflex pad is included to protect potential areas of irritation. The tray requires no tools for installation or removal. .DIMENSI

Sammons Preston Wheelchair Brake Lock Extension (Models 652402, 652403 & 552504)

The Sammons Preston Wheelchair Brake Lock Extension, models 652402, 652403 & 552504), is a wheel lock extension lever designed for use by wheelchair users with limited reach or arm strength. The chrome-plated steel lever is made of 0.63-inch round tubing and has a flat opening at one end to slip over the existing wheel lock; the other end has a rubber grip. The flattened end fits over standard brake lock and adds 11 inches. DIMENSIONS: 7.5 inches long.

Sammons Preston Wheelchair Elevating Arm Tray Kit (Model 6461)

The Sammons Preston Elevating Arm Tray Kit, model 6461, is an elevating armrest designed for use by individuals who use wheelchairs. Designed to fit most standard or desk armrests, this plastic tray fastens to the armrest of wheelchairs with a double D-ring Velcro Velstrap. The tray elevates to 25 degrees and can be mounted for either right or left side use. A heat gun can be used for customization. Bolts are included for elevation. DIMENSIONS (LxW): 22 x 4.5 inches. Double D-ring Velcro stra

Sammons Preston Wheelchair Foot Support (Model A7481)

The Wheelchair Foot Support, model A7481, is a foot support designed for use by people with weak, flaccid or hypertonic lower extremities who use wheelchairs. It positions the foot in proper anatomical alignment to assist in the prevention of ankle contractures. The foot portion effectively eliminates the need to continually reposition the foot and prevents feet from slipping off the wheelchair footrest. Made of rigid plastic, the support is covered to help prevent forward slippage and attaches

Sammons Preston Wheelchair Pouch

The Sammons Preston Wheelchair Pouch is a wheelchair back pouch designed to provide carrying capacity for wheelchair users. The expandable Codura nylon pouch is waterproof, stain-resistant, and machine-washable. It features a top cover flap and attaches to wheelchair push handles with loops. DIMENSIONS (WxHxW): 14 x 12 x 3 inches. COLOR: Gray.

Sammons Preston Wheelchair Pushing Cuffs (Model 9470 & 9471)

The Sammons Preston Wheelchair Pushing Cuffs, model 9470 and model 9471 are push cuffs designed to protect the palms and provide a better grip while propelling a wheelchair. The finger and thumb areas are open to permit full hand use at all times. The cuffs are secured to the hand with a leather strap and D-ring fasteners. Model 9470 are made of soft suede with non-slip Dycem palms, and model 9471 are made of plain suede. Model 9470 are $28.95 and model 9471 are $65.95. SIZES: One size fits all.

Sammons Preston Wheelchair Pushing Cuffs (Model 9470)

The Sammons Preston Wheelchair Pushing Cuffs, model 9470, are push cuffs designed to protect wheelchair user's hands and provide a better grip and traction while propelling a wheelchair. These suede leather gloves feature open fingers and thumb and a non-slip pad sewn into the palm. They slip on using a leather strap and D-ring closure. SIZES: One size fits all.

Sammons Preston Wheelchair Shopping Bag (Model 6444)

The Sammons Preston Wheelchair Shopping Bag, model 6444, is a wheelchair back pouch designed to carry groceries or large personal items for people who use wheelchairs. The bag features hook and loop fasteners that reduces bag’s 5-inch width if less room is needed. The material is latex free. DIMENSIONS (WxH): 16.5 x 16.5 inches.

Sand Rider Beach Wheelchair

Sand Rider is a lightweight, mobility device that can be used as a beach wheelchair or as an off-road wheelchair. It features oversized Wheeleez® low-pressure polyurethane wheels, an ergonomic push handle, a front pull point, a repositionable footrest, and a long footprint and trike design to facilitate easy pushing and prevent pitching of the occupant. In the span of about a minute, the entire unit can be broken down into 3 frame components and 2 large rear wheels using just threaded thumbscrew

Scalamobil

The Scalamobil Wheelchair Stairclimbing System is a powered stair transport for wheelchair designed to transport wheelchair users up and down staircases. The unit is compatible with almost all manual wheelchairs. To connect the unit, the wheelchair is backed into the adapter's wheelguards and secured with a clamping system. A padded headrest assures the passenger's comfort. The unit may be used on virtually any completely dry staircases, including those that are carpeted, made of wood, marble, p

Scooter Arm Tote

The Scooter Arm Tote is a wheelchair side pouch designed for use by individuals who use scooters. This heavy canvas bag attaches to the scooter armrest and features one large inner pocket with easy-to-grasp zipper closure and a three-section mesh outer pocket. DIMENSIONS: 10.5 x 13.5 x 2 inches.

Scooter Armrest Extensions

CUSTOM ADAPTATION PURPOSE: To assist an individual with mobility disabilities in transferring from a scooter. The existing scooter armrests were altered so they can be moved forward to provide a point of support in front of the user during transfers and moved back at other times. The armrests are mounted on hollow square tubing, into which long slots, rather than single holes, were cut. The arms slide along the slot into the forward position for standing transfers and backward for standard use

Scooter Basket Liner And Cover

The Scooter Basket Liner and Cover is a liner for scooter basket designed for use by individuals who use powered scooters. The protective cloth liner with cover fits inside a standard wire basket and holds shopping or other small items being transported in the basket. Items can be kept out of sight and dry by placing the included removable cover on top of the basket. The liner has carrying handles and an elasticized band that fits around the rim of the basket. The liner cover also features an el

Scooter Basket Liner Organizer (Model Ez0126)

The Scooter Basket Liner Organizer is a liner for a scooter basket designed for use by individuals with mobility disabilities or spinal cord injury. Made of nylon, the liner includes an adjustable drawstring to fit most baskets. There is a zippered front pocket for personal items (e.g. wallet, keys) and two mesh pockets to hold such items as cell phones, remote controls or beverages. DIMENSIONS (HxLxW): 11 x 13 x 10 inches. COLOR: Black.

Scooter Board

This Scooter board is designed for kids to travel any which way while developing gross motor skills. Helps children work on balance and motor planning. Develops strength in lower and upper extremities. Supports up to 120 pounds.

Scooter Canopy

DO IT YOURSELF ENTRY --- PURPOSE: To protect an individual who uses a scooter who is sun sensitive from sun exposure. This canopy is detachable and folds for transport and storage. The frame is made from steel and aluminum tubing and it is covered in sunbrella fabric (nylon or nylon/urethane material can also be used). Scaled drawings for the frame are available from the originator. OPTIONS: Plastic windows can be added for those seeking rain/snow protection rather than sun protection. TITLE: Th

Scooter Cape

The Scooter Cape is designed for use by individuals who use a motorized scooter for mobility due to generalized weakness, neurological or motor impairments. It provides complete wind and rain protection from head to toe, including your scooter. There are Velcro slots to accommodate mirrors while retaining maximum waterproofing. The clear front panel enables you to clearly view the controls while ensuring that you can safely use your lights. It also features an easy to use single zip fastening, t

Scooter Control Cover

CUSTOM ADAPTATION PURPOSE: To enable an individual with mobility disabilities to use a scooter outdoors in inclement weather. Made of Lexan, the cover is shaped to fit over the scooter controls without getting in the way. Initially, the cover was attached with Velcro strips glued to the back of the handlebar mount and the cover itself. However, the Velcro did not hold the cover in place when the user reached under to insert the key. The Velcro was replaced with cable ties laced through small ho

Scooter Cover (Model 0125)

The Scooter Cover, model 0125, is a scooter cover designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this cover features elasticized, reinforced seams that fit the cover to the scooter. There are grommets along the bottom edge if the cover needs to be tied down. A cover storage bag is included. DIMENSIONS (HxLxW): 33 x 50 x 22 inches. COLOR: Black. WARRANTY: One-year limited warranty.

Scooter Footrest

CUSTOM ADAPTATION PURPOSE: To provide a footrest on a scooter for an individual with severe arthritis. Because the individual was unable to bend his legs, he could not use the existing scooter floor/footrest. Instead, he rested his feet on the mudguards. However, this posed a problem when traveling downhill; because the rider could not brace himself, he would slide forward. To solve the problem, a new footrest was constructed of square metal tubing and attached to the front of the scooter, enab

Scooter Pack (Model Ez0122)

The Scooter Pack is a scooter back pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made of weather-resistant nylon, this pack attaches to the back of scooter seat using a soft mesh that slips over the back. It includes headrest grommets if needed. The Scooter Pack has a large interior compartment and a deep side pockets as well as a carrying handle for use as a portable tote. DIMENSIONS (HxLxW): 6 x 16 x 14.5 inches. COLOR: Black.

Scooter Seat Cover

The Scooter Seat Cover is a seat accessory for a scooter designed for use by individuals with lower extremity or mobility disabilities. This weatherproof cover secures under the seat using the locking drawstring and can be used while the scooter is being driven.

Scooter Single Oxygen (Model Ez0142)

The Scooter Single Oxygen is an oxygen cylinder carrying case for a scooter or a powered wheelchair designed for use by individuals with respiratory disabilities and mobility disabilities or spinal cord injury. Made of water-resistant 420-denier nylon, the case holds "D" and "E" cylinders by adjusting using a bottom snap. An adjustable extra-long top strap with buckle attachment secures the case to most scooter and powered wheelchair seats, and two bottom straps fasten it to the scooter or wheel

Scooter Tiller Cover

The Scooter Tiller Cover is designed to protect scooter controls from rain during use. Made of weather-resistant material, this cover covers the tiller and handlebars. Hand openings enable the user to grasp the handlebars while keeping the hands protected from the weather. The cover has a clear vinyl top to allow the control panel to remain visible. SIZES: Small or large.

Scooter Trailer

The Scooter Trailer is a wheelchair cart designed to equip a powered scooter to tow a child and/or cargo. The trailer is mounted on a single swiveling castor wheel. The trailer is attached to the scooter by means of a fixed hitch. There is a wire basket on the trailer enclosing a bicycle baby seat which is mounted on a wooden platform. The fixed hitch/wheel castor configuration allows greater maneuverability when reversing. PROTOTYPE DEVELOPMENT: Designed by Jim Rees for mothers who use scooter

Scooter Ventilator Mount

DO IT YOURSELF PURPOSE: To provide ventilator users with a means of carrying the ventilator on a scooter. Attach a heavy-duty key rings to the armrest posts using nylon web straps with clips that can clip on the handle rings of the ventilator to allow the ventilator to hang from the armrests behind the seat. Place the ventilator battery on the scooter floor between the user's legs. Use the ventilator's external direct current (DC) battery cord to connect the battery to the ventilator. Secure co

Scout (Models Sc14, Sc16, & Sc18)

The Scout is a child's manual wheelchair and stroller designed for indoor or outdoor use by children with mobility, neurological, or severe physical disabilities. FRAME (HxLxW): Folding frame. Model SC14 is 38 x 54 x 26 inches open, model SC16 is 39 x 55 x 28 inches open, and model SC18 is 39 x 56 x 30.5 inches open. The chair can be folded in one step with most options in place. Folded dimensions are 15.5 x 52 x 16 inches for model SC14, 15 x 55 x 16 inches for model SC16, or 16.5 x 57 x 16 inc

Sealed Lead Acid Batteries

Sealed Lead Acid Batteries are batteries designed for use with power wheelchairs. The rechargeable batteries are available in 23 leak-proof, maintenance-free models. The nominal capacity of the battery is a 20 hour rate according to types at 25 degrees Centigrade to a cutoff voltage of 1.75 volts per cell.

Sears Sealed Gel Cell Battery (Models 9613, 9616, & 9617)

The Sears Sealed Gel Cell Battery, models 9613, 9616, and 9617, is a wheelchair battery designed for use with powered wheelchairs and scooters. Designed for repeated discharging and recharging, these batteries are leak-proof and non-spillable. An automatic 12-volt charger charges the battery to at least 13.8 volts, but no more than 14.1 volts. The battery has an "L"-type terminal. The discharge rate is approximate 43 minutes at 25 amps, 83 minutes at 15 amps, and 170 minutes at 8 amps. GROUP/SIZ

Seasucker Ipad Mounting System

The SeaSucker iPad Mounting System is a stand for a tablet computer and a computer mounting kit for wheelchair designed for use by individuals with use of only one hand, or mobility, lower extremity or upper extremity disabilities, or spinal cord injury. The system requires no bracket for the iPad; it has a 4.5-inch diameter vacuum mount that attaches to the back of the iPad. This mount attaches to a flexible RAM arm that can be moved to position the iPad as needed. The arm attaches to a second

Seat Belt Kit

The Seat Belt Kit is a wheelchair seatbelt designed for use with the Otto Bock MOSS II seating systems (see separate entries). The kit consists of webbing with a plastic side-release or push button-style buckle. DIMENSIONS: 1.5 and 2 inch widths.

Seat Belts

The Seat Belts are wheelchair seatbelts designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Available styles include auto-style belts and dual-pull belts with comfort pads. OPTIOS: Slide-on and sew-on comfort pads are available. DIMENSIONS: 1.5 or 2 inches wide. Custom lengths are available.

Seat Board.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Eliminates the sling effect from a wheelchair sling seat, provides a solid seating platform. Diagram and direction for making a wooden seat support for a wheelchair. the board should be placed between, not on, the rails to which the seat is fastened. Similar to commercially available product. SKILLS REQUIRED: woodworking AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Accent Press, Bloomington, IL; p 45. NARIC CALL NUMBER: R0848. 1981.

Seating Hardware

Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.

See-Thru Work Tray (Model Nc94102)

The See-Thru Work Tray, model NC94102, is a lapboard designed to provide a work, eating, and activity surface for people who use wheelchairs. The clear tray is made of polycarbonate and bordered with an all-aluminum lip on the front and sides. The tray has a hook and loop straps that attach onto wheelchair armrests. DIMENSIONS (WxD): 23.5 x 19 inches. The width of the oval space in front of the user's stomach is 15 inches.

Seeker

The Seeker is a child's or adult manual wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This all-terrain chair can be used in the water, in mud, in snow, in sand, and in grass. FRAME: Folding lightweight rotationally molded plastic chair in teal. The chair is available in a choice of 12-, 14-, 16-, 18-, or 20-inch widths. SEAT: Adjustable backrest with multi-grip handles. A seatbelt is optional. UPHOLSTERY: Cordura nylon seat and back. ARMRESTS: Removable

Seeker Ii

Seeker II is a powered all-terrain wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain wheelchair is designed for indoor or outdoor use on sand, grass, mud, snow, or rocky conditions. FRAME (HxW): 36 x 31.5 inches with a 16-inch seat; folded the wheelchair is 21 inches wide. The plastic folding frame has molded ABS plastic plates and hinges and left and right side panels. The chair also has a remov

Self Propelled Stretcher (Model 1867)

The Self-Propelled Stretcher 1867 is designed for rehabiliation purposes and used by individuals who must remain in a prone position. A thick litter pad and cushioned wedge block for chin elevation is included. The litter pad is upholstered in naugahyde. Additonal standards include "Uni-Mold" Mag Composite wheel and handrim with finger grips, a non-marring bumper, and accessible toggle brakes. DIMENSIONS: Top height adjusts from 24 to 30 inches, overall length is 72 inches, litter 22 w x 70 l w

Self Propelled Stretcher With Side Rails

Self propelled stretcher. Chrome plated tubular steel frame with 24 inch front drive wheels with hand rims and 8 inch rear casters. Foam pad upholstered in naugahyde vinyl. Rubber bumpers at each corner. Available with side rails. Height adjustable from 26 to 30 inches. Overall length 60 inches. Width 29 inches.

Self-Assisting Belt (Model 4220)

The Self-Assisting Belt, model 4220, is a wheelchair seatbelt designed to reduce siding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of heavy-duty nylon, this machine-washable belt is equipped with an airline-style buckle. DIMENSIONS: Fits hips up to 60 inches.

Self-Assisting Belt (Models 4228 & 4228L)

The Self-Assisting Belt is a wheelchair seatbelt designed to reduce sliding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of polypropylene webbing, this machine-washable belt is equipped with Velcro closure. DIMENSIONS: Model 4228 fits hips up to 42 inches and model 4228L is extrsa-long to fit hips up to 62 inches.

Self-Navigating Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a self-navigating wheelchair for individuals with disabilities. MIT researchers have been working on a self-navigating wheelchair prototype that can learn the geography around it through simple voice commands, and then travel around using the map created within its computer brain. The self-navigating wheelchair relies on a WiFi system to make its maps and then navigate through them, and requires setting up a network of WiFi nodes around

Semi-Pneumatic Eight-Inch Disc Wheels (Model 44)

Semi-Pneumatic Eight-inch Disc Wheels, model 44, are semipneumatic caster tire and wheels designed for use with wheelchairs. DIMENSIONS: 8 inches.

Semipneumatic Caster Wheel (Model 90-51605)

The Semipneumatic Caster Wheel, model 90-51605, is a semipneumatic caster tire and wheel for wheelchairs. The assembly includes bearings and a gray non marking rubber tire. DIMENSIONS (DxW): 8 x 1.75 inches. COLOR: Black or gray.

Sentra Full Reclining Wheelchair

The Sentra Full Reclining Wheelchair is a reclining manual wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Carbon steel frame with double-coated chrome finish, hydraulic reclining mechanism, anti-tippers, headrest extension, and dual axle to allow transition of the seat to hemi-level. SEAT: 16-, 18-, or 20-inch width with full reclining back. UPHOLSTERY: Heavy gauge black naugahyde upholstery. ARMRESTS: Padd

Shabbat Module

The Shabbat Module is a scooter controller that can be added to the Amigo RT Express, Amigo RD and Amigo HD scooters (see separate entries). It is designed for use by Orthodox Jews with mobility disabilities. The Shabbat Module is halachically-approved and certified by a representative of the Zomet Institute-Israel. It is designed to allow individual participation in full observance of the Sabbath. After the module is installed, the scooter user can activate the Shabbat mode using a toggle swit

Shadow 3D & Shadow 3D Basketball

The Shadow 3D and the Shadow 3D Basketball are three-wheel manual, lightweight rigid frame sport wheelchairs. FRAME: T-frame in regular and short configurations. Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 13 to 20 inches. A choice of a right- or left-mounted transfer handle is standard; A transfer handle on both sides is optional. Anti-tip tubes are optional. SEAT: The seat width is .5-inch narrower

Shadow Mach 3 & Shadow Mach 3 / Ds

The Shadow Mach 3 is a hand propelled racing cycle wheelchair for adults.. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes. SEAT: The seat is available in a choice of widths from 13 to 20 inches in one-inch increments. Custom seat frame modifications are available. A choice of a standard backrest which adjusts from 19 to 22 inches high or a short backrest which adjusts from 16 to 19 inches is offered. CUSHION: A choice of a 2-inch cushion or a 2-i

Shadow One & Shadow Dt

The Shadow One and Shadow DT are manual sport wheelchairs. FRAME: Chrome-moly Shadow One 72-degree frame or Shadow One DT 72- or 85-degree frame. The frames are available in 11 standard colors, 6 optional colors, and custom or special effect finishes. The frames are offered for sports/daily use in standard, large standard, small standard and for sports use in steep, tall, and ultra-tall. Custom modifications are available. Anti-tips with wheels are optional. SEAT: Seat widths range from 12 to 2

Shadow Qr

The Shadow QR is a manual, lightweight rigid frame racing wheelchair. FRAME: Available in 11 standard colors, 6 optional colors, and special effect or custom finishes, the frame is available in a range of widths from 12 to 20 inches. Custom modifications are also available. U-shaped anti-tip tubes are standard. SEAT: The seat rails on this chair extend 3.5 inches beyond the front of the upholstery. The seat depth ranges from 12 to 18 inches in one-inch increments. The rear seat height ranges fro

Shadow Racer

The Shadow Racer is a manual, rigid frame, racing wheelchair. FRAME: T-tube chrome moly or T-tube aluminum with 3 or 4 wheel design, custom built. Frame lengths of 33, 35, 37, 39, 41, and 43 inches are available. SEAT: Seat width 11 to 17 inches. Seat depth and back height fit to user. WHEELS: Quick-release 20, 24, and 26 inch rear wheels with tubular tires with 12 degrees camber. 16, 18 and 20 inch front wheels with tubular tires. BRAKES: Handbrake standard. OPTIONS: Cateye Vectra computer is s

Shasta Wheelchair Tire, The

The Shasta Wheelchair Tire is a replacement rubber wheelchair tire designed for use by wheelchair users. This lightweight tire is designed to be used on low-profile rims. The tire has a smooth, non-marking tread pattern. DIMENSIONS: 24 x 1 inches.

Shear-Controlling Power Recline Systems

Shear-Controlling Power Recline Systems are powered reclining systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers a full 90 degrees of tilt. This system slides the seat backward as the seat back reclines, taking pressure off sensitive areas and controlling shearing in the lumbar, sacral, and ischial regions. Standard features include a solid contoured back with high-density foam and a Cordura

Sheepette Wheelchair Armrest And Seat Pads (Models D3004 & D3005)

The Sheepette Wheelchair Armrest Pad, model D3004, and Seat Pads, model D3005, are decubitus pads designed for use by individuals at risk for pressure sores or ulcers. Made of synthetic sheepskin, the seat pad is a one-piece pad that covers wheelchair back and seat to provide pressure relief. Also made of synthetic sheepskin, the armrest pads cover the armrests of the wheelchair to reduce pressure on the arms and elbows.

Sheepskin Seat Belt Cover

The Sheepskin Seat Belt Cover is a wheelchair seat belt accessory designed for use by individuals with spinal cord injury or mobility disabilities. This sleeve fits over the seat belt and secures with Velcro to help reduce pressure and absorb moisture. They DIMENSIONS: 8 inches long. COLOR: Available bone or charcoal grey.

Sheepskin Wheelchair Arm Pad

The Sheepskin Wheelchair Arm Pad is a wheelchair armrest pad designed for use by individuals at risk for pressure sores/ulcers. Made from Medical Sheepskin, these pads attach to the wheelchair armrest with Velcro straps and are fully washable.

Sheepskin Wheelchair Arm Rest Covers (Models 112 & 113)

The Sheepskin Wheelchair Arm Rest Covers are wheelchair armrest pads designed for use by people with mobility disabilities, spinal cord injury and others who use wheelchairs. These pads are made of tanned natural sheepskin are machine washable and dryable. Each pad has adjustable Velcro straps to attach it to an armrest of a wheelchair. The pads fit full (model 112) or desk (model 113) size armrests and are sold in pairs. DIMENSIONS (LxW): 14.5 x 16 inches (model 112) or 9.5 x 5 inches (model 11

Sheepskin Wheelchair Footplate Cover

The Sheepskin Wheelchair Footplate Cover is a footplate pad designed for use by individuals who use wheelchairs. These footplate covers are made from Medical Sheepskin, are fully washable, and are held in place with elastic straps.

Sherpa Tilt-In-Space Mobility Base

The Sherpa Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair base designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 25.5 inches with backrest folded down x 19 inches without footrests (29.5 inches with footrests) x seat width + 7 inches. The powder-coated aluminum frame has a 50-degree tilt range. A built-in scale enables replication of the exact angle of tilt. Other features include height-adjustable

Sherwood Wheelchair Tire, The

The Sherwood Wheelchair Tire is a replacement rubber wheelchair tire designed for use by wheelchair users. This high-performance tire is dirt resistant and will not mark floors. It is designed to perform well for extended distances. DIMENSIONS: 24 x 1 inches.

Shoe Holders

Molded ABS plastic shoe holder with padded ankle strap and forefoot strap. Attach to footplate with screws. Also available in extra heavy duty model. Sizes: Small 4 1/2 inches long by 3 inches wide, Medium 6 inches long by 4 inches wide, Large 8 inches long by 4 1/2 inches wide, and X-Large 9 1/2 inches long by 5 inches wide.

Shoe Holders

Molded plastic shoe holder in 4 sizes, 2 1/2 to 5 3/4 inches wide by 5 1/2 to 11 inches long. 1-inch nylon adjustable velcro straps at instep and toe. Hardware for bolting to footplate included. Replacement straps, pads for straps, and brackets for Motion Designs chairs available.

Shoe Holders (Models 30101S, 30101M, 30101L, 30102S, 30102M, & 30102L)

Shoe Holders are foot positioners designed for use by individuals who use wheelchairs. Made of Haircell plastic with nylon straps with quick-release plastic buttons, these shoe-shaped positioners ensure proper positioning of the feet. The 30101 models have one-inch on center mounting holes. The 30102 models do not have mounting holes. SIZES: Both the 30101 and 30102 models are available in small, medium, and large. DIMENSIONS (WxL): The small holders are 4.3 x 6 inches. The medium holders are 4.

Shoprider Featherlite (Model Te-Fs888)

The Shoprider FeatherLite, model TE-FS888, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 x 22 x 34 inches. The turning radius is 32.5 inches and there are rear anti-tips. This foldable chair is available in burgundy. CONTROLS: Adjustable length VSI joystick controller. RWD: Two 0.45-horsepower motors rear-wheel drive. SEAT

Shoprider Fpc Power Chair (Models Phfw-1118 & Phfw-1120)

The Shoprider FPC Power Chair, models PHFW-1118 and PHFW-1120, is a folding powered wheelchair designed for used by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 46 x 25 x 37 inches (model PHFW-1118) and 46 x 27 x 37 inches (PHFW-1120). For both models, the ground clearance is 3 inches, and the turning radius is 24 inches. The frame is made of steel, and available in b

Shoprider Hd (Model 888Whd)

The Shoprider HD, model 888WHD, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxWxH): The overall dimensions, including the footplate, are 47 x 29 x 50 inches. The ground clearance is 3 inches. The turning radius is 37.5 inches. The base is available in burgundy. CONTROLS: Programmable VR-2 Remote Joystick Controller with VR-2 Main Control Box featuring adjustable speed and battery

Shoprider Scootie

The Shoprider Scootie is a four-wheeled scooter designed for use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 to 40 x 17 x 19 to 34 inches. The ground clearance is 2 inches. The scooter is available in red, yellow, or blue and disassembles without tools for transport and storage. CONTROLS: Controls are mounted on a folding and locking tiller. A horn is also located on the tiller. RWD: Rear-wheel drive

Shoprider Smartie (Model Ul8W)

The Shoprider Smartie, model UL8W, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 36 x 23 x 37 inches. The ground clearance is 2 inches, and the turning radius is 15.5 inches. Rear anti-tips are included. This portable chair can be dismantled into three parts for transport. The base is available in red and blue. CONTROLS: VSI

Shoprider Sprinter 2-Seater (Model 889-4Dxd)

The Shopper Sprinter 2-Seater, model 889-4DXD, is a heavy-duty four-wheeled scooter designed for outdoor use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis and a companion. The unit includes dual headlights, turn signals, hazard lights, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 55 x 37 x 40 inches. The ground clearance is 4 inches. The turning radius is 59 inches. The base is available in burgundy red and has an open desi

Shoprider Sprinter Xl3 Deluxe (Model 778Xl)

The Shoprider Sprinter XL3 Deluxe, model 778XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad

Shoprider Sprinter Xl4 (Model 889-4)

The Shoprider Sprinter XL4, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for t

Shoprider Sprinter Xl4 Deluxe (Model 889Xl)

The Shoprider Sprinter XL4 Deluxe, model 889-XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an ad

Shoprider Sunrunner (Model 777-3 /4)

The Sunrunner, model 777-3/4, is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a front black mesh basket. FRAME (LxWxH): The overall dimensions are 43 to 46 x 22 x 35 inches. The wheelbase is 34 x 18 inches with a ground clearance of 3 inches. The turning radius is 40 inches. The frame disassembles for transport. The scooter is available in burgundy or blue (with five-position tiller)

Shuttle

The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the

Side / Armrest Bags

DO IT YOURSELF PURPOSE: To provide powered wheelchair users with carrying capability. Two pocket organizers designed for use on car visors were purchased from the automotive section of a local store. One organizer was strapped to each arm and the front strap of each was clamped under the armrest pad. TITLE: Side/Arm Rest Bags. REF: http://www.wheelchairmodifications.org. The organization can also be reached at Wheelchair Modifications, 5533 A Pony Farm Drive, Richmond, VA 23227.

Side By Side

---- PROTOTYPE --------- PURPOSE: Side by Side is an accessory for the wheelchair which allows a friend, relative or caregiver to push the chair while walking beside rather than behind it. Called Side by Side, the prototype device is designed to enable eye contact to encourage conversation. This design keeps the wheelchair from turning on the spot when pushed. The device can also be folded to fit into the rear pocket of the chair.

Side Entry Backpack For Scooters (Model 70340)

The Side Entry Backpack for Scooters, model 70340, is a wheelchair back pouch designed to allow scooter users facilitated access to items in the caddy by means of a side opening rather than a top opening. The pouch includes a main compartment, kangaroo pouch, pen and pencil pouch, and front flap pouch. It attaches with adjustable straps or may be bolted to the seat back. The bag is made of 1000 Denier coated nylon Cordura. DIMENSIONS (HxWxD): 20 x 15 x 6 inches. COLOR: Royal blue, magenta, teal,

Side Entry Backpack For Wheelchairs (Model 70060)

The Side Entry Backpack, model 70060, is a wheelchair backpouch designed to eliminate the contortions necessary to open a standard zipper-style backpack or flap pouch from the chair. This backpack is accessed by opening the hex frame from the side. The caddy includes a main compartment, kangaroo pouch, pen and pencil pouch, and a front flap pouch. The bag is made of 1000 Denier coated nylon Cordura and attaches with 3/4-inch webbing with adjustable glides. OPTIONS: Backpack strap retainers avail

Side Kick Bag

The Side Kick Bag is an under seat pocket or wheelchair side pouch designed to provide carrying capacity for people who use wheelchairs. Made of nylon packcloth, this slimline pouch attaches on the inside of the armrest or under the seat and features a main zippered compartment with a ring pull and two smaller fromt pockets, one fleece-lined. DIMENSIONS (WxH): 12.25 x 7 inches. COLOR: Red.

Sidekick

The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv

Sidekick Wheelchair Bag (Model 162)

The Side Kick Wheelchair Bag, model 162, is a wheelchair side pouch designed for use by individuals with mobility disabilities or spinal cord injury. This denim wheelchair pouch hangs from the armrest. It has a covering flap that closes with Velcro, and hook-and-loop tab straps to hold the bag at armrest height. DIMENSIONS (HxW): 8 x 11 inches with 10-inch straps. OPTIONS: Monogram. COLORS: The bag comes in black, khaki, olive, teal, or blue denim. Monogram thread is offered in a choice of custo

Sidelyer Strap, H-Straps, & Pelvic Strap

The Sidelyer Strap, H-Strap, and Pelvic Strap are restraint and positioning belts designed for use in conjunction with the large foam positioning shapes by the manufacturer (see separate entries). The straps are fabricated of Evazote foam for cushioning ithout bottoming out. The Sidelyer Strap is designed to support the body in proper alignment when positioned on its side. It comes in Adult and Child models, both available with a hole for a gastrostomy tube. The H-Straps form a harness and are u

Sideminder Wheelchair Back (Models Mdtsm16, Mdtsm18, & Mdtsm20)

The SideMinder Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. This steel replacement back features up-and-down and side-to-side adjustments that provide lateral support to prevent leaning to one side. This back adapts to fit non-standard size chairs. OPTIONS: Available with or without lateral supports and headrest. SIZES: Avialable for 16-inch seat (model MDTSM16), 18-inch seat (mo

Sighted Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a robotic wheelchair that uses three dimensional (3D) imaging to allow individuals who are blind or have low vision and use a wheelchair to "see" when navigating in the indoor and outdoor environment. Researchers at the Luleå University of Technology (LTU) in Sweden have developed a wheelchair that uses a laser sensor to generate a 3D map of its surroundings, which is then transferred to an on-board haptic robot, allowing the robot to na

Silent Call Sleep Alert Charger Unit (Model Sc1006-2)

The Silent Call Sleep Alert Charger Unit is a battery charger designed to be used with Silent Call Receivers (see separate entries). Connecting the receiver to this unit enables 24-hour operation of the system while the batteries are recharged by plugging the charger into a wall outlet. The unit can also be used with optional strobes and vibrators.

Silva Wheelchair Tire, The

The Silva Wheelchair Tire is a replacement polyurethane tire designed for use by wheelchair users. This high-performance tire is made from high-quality urethane. DIMENSIONS: 25 x 1 inches.

Simple Cup Holder For A Wheelchair

This do-it-yourself simple cup holder for a wheelchair combines the most practical components of each type of holder (hard shell and soft bodied). This new cup holder retains its shape while being used, has an opening wide enough to allow easy placement and removal of a cup, and has enough resilience to survive being regularly smashed into various hard objects. The individual’s cup that is used everyday is measured and the angle needed to hold it was determined and a simple pattern was created.

Single Switch Remote Controlled Camera

---- PROTOTYPE --------- PURPOSE: To create a prototype of a single switch remotely controlled camera for an individual with cerebral palsy. A young man with cerebral palsy who had no use of his hands wished to independently operate a camera. Mounting the camera to the young man’s wheelchair was straightforward. The remote control cable for his camera required two switch actions, one to focus the camera and the other to simultaneously trigger the shutter. The young man currently used a switch ar

Single Tube Lift-Off Mounting Kit (Models 3611 & 3611-01)

The Single Tube Lift-off Mounting Kit is designed to attach the headrest, or the occipital ring and its Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Lift-Off Mounting Plate, a 90-degree Vertical Tube, and two 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube Mounting Kit (Models 3601, 3601-01)

The Single Tube Mounting Kit is headrest accessory hardware designed to attach a headrest or the occipital ring and its Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Mounting Plate, a 90-degree Vertical Tube, and two 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube With Cross Tube Lift-Off Mounting Kit (Models 3612 & 3612-01)

The Single Tube with Cross Tube Lift-off Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Lift-Off Mounting Plate, a 90-degree Vertical Tube, a 90-degree Cross Tube, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Single Tube With Cross Tube Mounting Kit (Models 3602, 3602-01)

The Single Tube With Cross Tube Mounting Kit is headrest accessory hardware designed to attach the headrest, the occipital ring, and their Interface hardware to the back of a wheelchair. The Kit consists of a Single Tube Mounting Plate, a 90-degree Vertical Tube, a 90-degree Cross Tube, and four 2-Point Knobs. The Mounting Plate attaches to the back of the wheelchair with four sets of ##10-32 Screws and ##10-32 Nuts. COLOR: Available in stainless steel or black.

Sitkit

The SitKit is a wheelchair fitting system designed for use by clinicians and suppliers to optimize the fit of a wheelchair for an individual user with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The SitKit includes a reversible caliper handle for hip width and upper leg measurements; a laser height gauge for lower leg measurement; a digital angle gauge for calculating the proper wheel camber, backrest angle, front frame angle, and foot plate ang

Skil-Care Removable Wheelchair Lap Trays (Series 7050)

Skil-Care Removable Wheelchair Lap Trays, series 7050, are designed to provide a work and feeding surface and positioning support for people who use wheelchairs. Available styles include a long-lasting Dura-Tray, a clear tray, an Econo-Tray, and a padded SofTop Tray. The SofTop Tray is available in an adult or a child's model. All trays feature straps that secure around the chair with easy-open closures. OPTIONS: Replacement straps. DIMENSIONS: The child's SofTop Tray is 19 x 22 inches.

Skil-Care Resident-Release Nylon Belts (Series 7010)

Skil-Care Resident-Release Nylon Belts, series 7010, are wheelchair seatbelts designed to provide security and positioning assistance for people who use wheelchairs. These belts secure to the wheelchair using the existing screws and are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. DIMENSIONS: All models are two inches wide. The model with the side-release buckle is available in 42 or 54 inches long. The model with

Skil-Care Resident-Release Soft Belts (Series 3012)

Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.

Skippi & Skippi Plus

The Skippi and Skippi Plus are child's powered wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury. Adjustable and designed to grow with the child, it has multiple configuration options, and it was design to have a low profile and be compact and maneuverable. FRAME (WxL): 22.4 x 27.6 (without leg rests) or 33.5 (with leg rests) inches. It has a turning radius of 21.7 inches, and the ground clearance is 66 m

Skycare Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a wheelchair-like mobility tool to be used inside an airplane cabin by individuals with mobility disabilities and/or wheelchair users. Traveling as a wheelchair user and navigating around and onboard an aircraft can be quite a challenge and usually requires assistance from one or more of the flight crew. The Skycare Chair attempts to increase the independence of individuals with lower extremity or mobility disabilities or spinal cord inj

Skyway Wheels

Replacement wheelchair wheels and casters. Nylon mag style wheel. 6, 8, 12.5, 14, 16, 20, and 24 inch diameters. For use with pneumatic or semi- pneumatic tires. Aluminum pushrims 20 inches through 24 inches with rivnuts or tabs.

Sleeve Guards

The Sleeve Guards are sleeve protectors designed for use by individuals who use manual wheelchairs. These guards are worn over the user’s original garment to protect shirt sleeves, jackets and skin against moisture and dirt from the wheelchair's wheels. SIZE: One size fits all.

Slice Jr. Large Mini Pack

The Slice Jr. Large Mini Pack is a wheelchair side pouch designed for use by individuals with mobility disabilities or spinal cord injury. Made from 1200D/PVC material, the unit has a large zippered storage compartment, with two Velcro straps on the back for attaching to a wheelchair. Inside is an expandable net pocket. On the front is a zippered pocket for holding smaller items safely and close at hand. DIMENSIONS (HxWxD): Main compartment is 7.5 x 6.5 x 3 inches, with with a 5-inch wide zipper

Slice Wheelchair Backpack

The Slice Wheelchair Backpack is a wheelchair back pouch designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. Made from water resistant 1200D/PVC, this unit attaches to a wheelchair with or without a push handle using two adjustable sewn-on straps with metal hardware (metal buckles and 4-metal D-rings). The unit has a large zippered storage compartment, with zippers that open from either side. Inside is a large expan

Sliding Headrest Bracket

The Sliding Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury or cerebral palsy. It is added to a headrest on a seat or wheelchair to enable headrest adjustments. This slotted interface bracket allows the headrest to be offset to either side, with infinite lateral adjustment up to 2 inches for an Otto Bock or NE-AT Headrest Bracket (see separate entry). This bracket attaches to the seating system using the existing h

Slim Armstrong Mounting System

The Slim Armstrong Mounting System is a mounting system for communication devices or switches that can be attached to wheelchairs, bed frames, tables or trays for activities at home, school, work and in the community. The device has a slender, telescoping arm that holds up to 5 pounds. The system includes the following components: a clamp for anchoring on most curved or flat surfaces, a ball joint, a flexor rod with built-in ball joint, a telescoping arm, and a small triangular mounting plate. T

Slim Jim

Wheelchair side pouch has zip closure on top, or flap with Velcro closure. Four outer pockets and securing strap at either end. 7 by 12 inches. Black or saddle vinyl.

Slim-Grip Bike Mount With Safety Strap (Model Sm532)

The Slim-Grip Bike Mount with Safety Strap, model SM532, is a cell phone wheelchair mount designed for use by individuals with lower extremity or mobilitiy disabilities or spinal cord injury. Originally designed for bicycles, this low profile mount is compatible with most smartphones with a screen size of 3.2 inches or more, with or without a case, including the iPhone, HTC, Samsung, Motorola, LG, Sony Ericsson, and ASUS. The mount has a 180 degrees tilt-swivel head that allows maximum viewing p

Slipcasting Board

The Slipcasting Board is a lapboard designed to assist users with limited strength to handle the large, heavy plaster molds that are used for slipcasting. The device consists of a 3/4-inch plywood board with an opening on one side. The user places the board between two chairs and sits on one side. The board surface supports the plaster mold and provides a safer working position to handle the heavy mold. The opening allows the slip to be poured out of the mold and into a bucket which is placed on

Small Fry Rigid Wheelchair

The Small Fry Wheelchair is a manual child's wheelchair designed for use by children with mobility disabilities. FRAME: Lightweight rigid frame with a fixed front end and push handles. Fixed anti-tips are also standard and flip-up anti-tips are available at no extra charge. The frame accommodates growth and is available in a choice of frame widths from 10 to 18 inches wide in one inch increments. Frame depths are available from 4 to 13 inches. The frame is available in magenta, red, gloss black

Smartleg.

Elevating legrest that extends 3 to 5 inches when elevated. Fits any adult wheelchair from Invacare. Can be lengthened from 16 to 20 inches. Weight, 12 pounds per pair.

Smartsensor

The SmartSensor is a collision prevention system for scooter designed for use by people with mobility disabilities. The SmartSensor can be added to the Amigo Classic FD, Amigo RT Express, Amigo RD and Amigo HD scooters (see separate entries). It can detect objects up to 30 inches ahead and when an object is detected, it gently slows the scooter’s forward speed, bringing it to a gradual stop. When the SmartSensor is activated, the scooter is limited to a top speed of 2.3 miles per hour so that th

Smithcot

The Smithcot is a flexible canvas sling that can be used for moving persons with mobility, walking or lower extremity disabilities or seniors, or as an emergency evacuation carrier. The Smithcot is designed to hold an individual comfortably but securely around tight corners or down stairways. It is made of a single square of #8 100% cotton duck cloth, and it has four grip handles, one a at each corner. The Smithcot is not for use with people who have suspected back or neck injuries. DIMENSIONS (

Snapdragon

The SnapDragon is a powered elevating wheelchair designed for indoor or outdoor use by children as young as one year old with mobility or neurological disabilities or spinal cord injury. FRAME: Modular powerbase in a choice of six standard colors. The chair disassembles for transport. CONTROLS: Programmable joystick. SEAT: The seat features an elastometric suspension and is custom-made to fit every individual. SEAT ELEVATOR: The powered seat elevator adjusts the height of the seat from the floor

Snazzy 2 (Model 777-4Wa)

The Snazzy 2, model 777-4WA, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The scooter is equipped with rear reflectors and a front mesh basket. FRAME (LxWxH): The overall dimensions are 44 x 21 x 18 to 36.5 inches. The turning radius is 36.5 inches. The scooter is equipped with a front bumper and rear anti-tip wheels. CONTROLS: Finger tip controls are mounted on a single-position tiller.

Snowpod

The Snowpod is a snow and ice sled designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This arm-powered sled has a bicycle chain drive with snowmobile tracks instead of wheels, and a 49-speed 7 x 7 gearbox with independent track drives (forward and reverse). It can climb 45-degree slopes on glaciated mountains such as Mt. Hood and Mt. Rainier in the Pacific Northwest. SPEEDS: 100 horizontal feet per minute. WEIGHT: 45 pounds.

So Soft Deep U Headrest (Model Ssdu100)

The So Soft Deep U Headrest, model SSDU100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs and need to keep their heads positioned upright and centered. This unit has aggressive laterals for maintaining head position, tapered for minimal interference of vision. The headrest has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure reli

So Soft Oval Headrest (Models Sso100S & Sso200L)

The So Soft Oval Headrest, models SSO100S and SSO200L, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The headrest has a contoured shape for lateral support. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. The headrest comes with a zippered Triptex cover. SIZES: Small (SSO100S) or large (SSO200L). DIMENSIONS: 11 x 5 in

So Soft Quad Headrest (Model Ssq4100)

The So Soft Quad Headrest, model SSQ4100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The unit is slightly contoured for comfort and positioning. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. This headrest comes with a zippered Triptex cover. DIMENSIONS: 9 x 6.5 inches.

Soft Basket For Scooter Tillers

The Soft Basket for Scooter Tillers is a front mesh basket for individuals who use scooters. Features front mesh pockets and a zippered top to keep items safe. The Soft Basket for Scooter Tillers has the same cubic inch holding capacity as a standard wire basket. This scooter basket is constructed of water resistant fabric .

Soft Roll Alloy Caster

The Soft Roll Alloy Caster is a caster wheel designed for use by individuals with lower extrremity or mobility disabilities or spinal cord injury. This machined alloy caster has a smooth finish to promote easier turning and less rolling resistance, while reducing some wheel chatter. The smooth finish also means dirt will not get lodged in the tread and spread around inside. DIMENSIONS: Available with a diameter of 4, 5, or 6 inches. 1.5 inches wide.

Soft Seat (Models 6392 & 6394)

The Soft Seat is a seat cover for a wheelchair designed to enhance comfort and reduce pressure sores. Model 6392 is a seat and back pad set and model 6394 is a pair of armrest pads. These machine-washable sets (sold separately) are made of synthetic fur padding and fit most wheelchairs with full-length arms. The seat back pad secures to the wheelchair with loops that slip over the push handles.

Soft Surface Transfer Board (Models Tb-23Sst & Tb-28Sst)

The Soft Surface Transfer Board is a transfer board designed for use by individuals who use wheelchairs. This board is designed to assist with transfers from a wheelchair to a softer surface such as a bed or lift chair. The pear shape of this board minimizes sinking into a soft surface when transferring, creating a more level transfer. The wide end of the board distributes the users weight over a broader area relulting in a transfer with little or no incline or decline. OPTIONS: Available with o

Solar Powered Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a solar powered wheelchair with retractable panels for individuals with lower extremity or mobility disabilities, spinal cord injury, or cerebral palsy. A team of students and faculty from the University of Virginia School of Engineering created a prototype design of a solar powered wheelchair with retractable panels inspired by the idea from a man with cerebral palsy from Turkey. The Solar Powered Team (SPT) created the prototype using

Solar-Powered Scooter

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adapted power source for a motorized scooter for an individual with mobility and various disabilities. The individual lives in Florida and the uses the scooter for mobility outside of the home. An adapted battery and canopy that uses solar energy provides a piece of mind during electrical outages due to hurricanes and other disasters. To create this adaptation, William Heckenstaller of Gulf City Solar, in Bonita was contacted. Ins

Solid Back

Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m

Solid Back Insert (Model 75)

The Solid Back Insert, model 75, is designed for use in wheelchairs with sling upholstery and push handles. The insert features a rigid base with a foam liner, a fabric cover, and loops to secure it to the wheelchair push handles

Solid Backs (Models 102-1000, 102-2000, 102-3000, 102-4000, 102-5000, & 102-6000)

Adaptive solid seat backs with 1/2 inch plywood bases, 1/2 inch foam padding and Naugahyde, shelterite or synthetic lambswool covers. Available in any size, with or without mounting hardware. Modifications available include cutouts, extra or special foam, curved back, I-back, wedge cut.

Solid Drop Seat Systems (Models 31642 & 31643)

Solid Drop Seat Systems are solid seat inserts designed for use by individuals who use wheelchairs. The systems include a seven-ply birch solid seat insert and jeavy-duty J-brackets that may be adjusted to raise or lower the seat to achieve proper positioning for the user. The seat features cut out slots to fit around frame crossmembers. DIMENSIONS: The seat insert is 3/8-inch thick. Model 31642 fits chairs with a 16-inch seat and is 13 x 16 inches. Model 3143 fits chairs with 18-inch seats and

Solid Footboard (Model 108-8016)

Solid footrest with fixed or swing away brackets. Waterproof finished birchwood with plastic edges. All sizes. Mounts with 1 inch drop hooks and 30 degree clamps.

Solid Seat

Custom size solid seat with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and abductor mounting. Custom foams available. Modifications available include anti-thrust seat, leg length discrepancy, and built-in abductor. May be ordered without aluminum hardware, or mounted to chair with cinch straps, stationary knob- release hardware, adjustable angle knob-release hardware, non- adjustable drop hooks, or adjustable

Solid Seat (Model Ss1000)

The Solid Seat, model SS1000, is a drop seat for a wheelchair designed for use by individuals with a need for a lower seat due either to a high cushion or who propel the wheelchair with their feet. The Drop Seat is made of durable HDPP and fits most manual and powered wheelchairs. The hole pattern accomodates one-inch mounting increments. Velcro strips are provided to secure a cushion. The hardware adjusts from one-inch above a tube frame to 3 inches below a tube frame. DIMENSIONS (LxW): Avai

Solid Seat And Back

Solid seat and back inserts. Hardwood plywood base with firm foam padding. Naugahyde cover. Various hardware styles and clamps attach units to wheelchair. Customized to fit any wheelchair frame; manual, power drive, travel chair or sport chair. Back insert models: T-back, R- back or with straps.

Solid Seat Insert (Model 94)

The Solid Seat Insert, model 94, is designed for use in wheelchairs with sling upholstery to provide additional seating support. The insert has a rigid base with a foam liner.

Solid Seat Inserts (Models 31640, 31641, 31645, 31646, 31647, & 31648)

Solid Seat Inserts are designed for use by individuals who use wheelchairs. Available in a choice of seven-ply birch wood or paper phenolic with or without a hand hole, these inserts can be used in a standard sling seat to provide support for a cushion or as a base for a custom seating system. DIMENSIONS:Models 31640, 31645, and 31647 are 16 x 16 inches. Models 31641, 31646, and 31648 are 16 x 18 inches. The birch models are 3/8-inch thick. COLOR: Models 31647 and 31648 are black. The other mode

Solid Seat With Adjustable Brackets And Split Collar Clamps (Model 101-4000)

Solid seat, 1/2 inch marine grade plywood with 1 1/2 inches of foam padding, naugahyde upholstery. Brackets allow up to 3 inches of drop or 3 inches of raise in seat, or tilt in seat to accomodate needed angle of hip flexion. Can be fixed or removable depending on placement of the clamps. Seats are cut to fit between the rails.

Solid Seat With Attaching Hardware (Model Ee1) & Solid Back (Model Ee2)

Solid seat and back, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding. Hardware is designed to allow adjustment of seat to back angle, seating depth and flexion. Naugahyde upholstery. Full of cushion is rounded. Custom widths.

Solid Seats (Models 101-1000, 101-2000, & 101-3000)

Adaptive solid seat, 1/2 inch plywood base, 1 to 1 1/2 inch foam padding. Naugahyde, shelterite or synthetic lambswool covers. Any width or depth available. Special modifications available include cutouts, leg length discrepancy, wedge cut, special foam, anti-thrust cushion. Available with or without mounting hardware.

Solo

The Solo is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. Ground clearance is 4 inches. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. A powered seat lift is optional.

Solo 6600

The Solo 6600 is an adult folding, powered wheelchair. The overall measurement of the the wheelchair is 25.25 w x 37 h x 31.5 l inches. A detachable, sealed joystick is the standard controller. Lifetime sealed and lubricated drives are also standard. The seat and back measurements are: seat - 18 w, between armposts at seat level - 16.25, seat from floor - 20, top of armrest from seat - 10, back from seat - 15.25, depth of seat - 16, inches. The seat and back are vinyl upholstered with textilene

Solo Axis

The Solo Axis is a legrest designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This legrest has a spring-loaded, single post foot plate with power elevation and articulation at the knee pivot point. For safety, all moving parts are under the seat.

Solo Hd

The Solo HD is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 or 26 inches. Ground clearance is 4 inches with 10-inch rear wheels. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added special gearing to provide approximately 20 percent more power than the Solo scooter (see separate entry). CONTROLS: Contr

Solo Ii (Models 1262 & 1264)

The Solo II, models 1262 and 1264, is an add-on power unit designed for the manual wheelchair user who wants to upgrade to a power wheelchair without investing in a completely new chair. The Solo II converts a manual wheelchair to a power chair with just the replacement of the rear wheels, and the installation of a joystick, motor drives and batteries. Solo II models 1262 and 1264 are designed to fit wheelchairs with seat widths from 14 inches to 20 inches. Model 1262 has a 20:1 gear ratio and m

Solo Iv & Solo Iv Hd

The Solo IV and the Solo IV HD are four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 48.5 x 24 inches. Ground clearance is 4 inches with 10-inch rear wheels. These scooters are available in red or blue and disassemble for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments.

Solo Xt-550

The Solo XT-550 is a four-wheeled scooter designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches (26 inches wide with armrests). Ground clearance is 4 inches with 10-inch rear wheels. This scooter has additional aluminum crossbracing for strength and non-skid front fender footrests. The scooter is available in red or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added specia

Southpaw Adjustable Scooter Board And Tow Strap (Model 1950)

The Adjustable Scooter Board, model 1950, is designed for working on extension patterns and bilateral motor coordination for children with a physical disability. Since the board is adjustable, it can be used by clients of all ages without encountering the problem of too much or too little support. The board is padded for extra comfort and increases in size just by simply inserting a leaf and locking into place. Included with the board is a Tow Strap which clips easily to the front of the scooter

Southpaw Special Rider (Model 1982)

The Special Rider, model 1982, is a riding toy designed to provide support for positioning and smoother riding mobility for children with lower extremity and poor trunk control. The child controls the Special Rider by swinging the handle bars from side to side. It allows the physically limited child to become self propelled and engage in fun upper extremity and trunk exercise. By providing normal play activity, it helps to promote visual perceptual skills, enhance motor planning, and provide ves

Sovereign (Models 888-3Es & 888-4Es)

The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance o

Sovereign (Models 888B-3 & 888B-4)

The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model

Sparky Paediatric Powerchair

The Pride Sparky is a power chair designed for use by children with limited lower extremity mobility as a result of cerebral palsy, neurological involvement or spinal cord injury.  It offers both power tilt and manual recline. Rear-wheel drive ensures that the Sparky takes up as little room as possible, and its maneuverability is designed to assist an active child with getting around.  The Sparky’s controller is designed for use by young children, and the rear anti-tips ensure the safety of the

Special Tomato® Jogger™

The Special Tomato Jogger is designed for young children up to 110 lbs with special needs. The Special Tomato Jogger is an easy folding, lightweight, all terrain stroller pushchair for children with mild to moderate physical involvement. This special needs all-terrain jogging stroller comes standard with a functional rear suspension to promote a smooth ride over most surfaces. The swivel front tire makes it possible to maneuver through indoor spaces as well. For straight line strolling and rough

Spenco Foot Pillow (Model 31-559)

The Spenco Foot Pillow, model 31-559, is a pair of foot warmers and protectors designed for persons with lower extremity disabilities. The slippers are constructed of thick cotton/polyester and help relieve pressure on the foot, heels and ankle, whether a person is lying in bed or sitting in a wheelchair. SIZE: One size fits all.

Spenco Wheelchair Pad (Model 31-252)

The Spenco Wheelchair Pad, model 31-252, is a decubitus pad and armrest pad for persons using wheelchairs. The cotton/polyester covering provides protection for the arms and torso. The back of the pad is covered with waterproof sheeting.

Sphere Chair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a powered wheelchair that allows users with mobility disabilities to move, crouch, stand, or lay down all while seated and without leaving the chair. The Sphere Chair is a powered wheelchair that looks like a chair sitting on top of a ball (i.e. sphere) with two casters extending from the rear of the frame. The Sphere’s unique design allows for greater freedom of motion. Secured in the ergonomic seat, the user can switch between positi

Spirit

The Spirit is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 x 22 inches. Ground clearance is 3.5 inches and the turning radius is 30 inches. The scooter is available in white or red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is

Spitfire 1310 3-Wheel Compact Scooter (Models Spitfire1310Bl16Fs & Spitfire1310Rd16Fs)

The Spitfire 1310 3-Wheel Compact Scooter, models SPITFIRE1310BL16FS and SPITFIRE1310RD16FS, is a three-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 42 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 43 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport

Spitfire 1410 4-Wheel Compact Scooter (Models Spitfire1410Bl16Fs & Spitfire1410Rd16Fs)

The Spitfire 1410 4-Wheel Compact Scooter, models SPITFIRE1410BL16FS and SPITFIRE1410RD16FS, is a four-wheel scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 43 x 19 x 36 inches. The ground clearance is 2 inches, and the turning radius is 47 inches. It has anti-tip wheels and a standard plastic front basket. The scooter can be disassembled into 5 pieces for transport or

Spitfire Ex 1320 3 Wheel Compact Size Scooter (Models Spitfire132016Fs12 & Spitfire132016Fs21)

The Spitfire EX 1320 3 Wheel Compact Size Scooter, models SPITFIRE132016FS12 and SPITFIRE132016FS21, is a three-wheel scooter designed for use by individuals with lower extremity, mobility, neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 41 x 19 x 36 inches. The ground clearance is 3 inches, and the turning radius is 46 inches. It has rear anti-tip wheels and a standard plastic basket attached to the front of the tiller. The scooter can be d

Spitfire Ex 1420 4-Wheel Compact Scooter (Models Spitfire142016Fs21 & Spitfire142016Fs12)

The Spitfire EX 1420 4-Wheel Compact Scooter, models SPITFIRE142016FS21 and SPITFIRE142016FS12, is a four-wheeled scooter designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): 42 x 20 x 36 inches. The ground clearance is 3 inches, and the turning radius is 50 inches. It has rear anti-tip wheels and a standard plastic front basket with a removable liner bag. The scooter can be disassembled into 5 pieces for tr

Spoke Guards

Spoke Guards are decorative spoke protectors designed for use by individuals who use wheelchairs. These guards cover the spokes on rear wheelchair wheels and are offered in a variety of designs in eight categories: Animals, children's designs, groovin' designs, flower power, black-and-white, space, sports, and miscellaneous. Designs include dolphins, tigers, crayons, elf and snail, roses, flower and butterfly, geometric designs, black-and-white checkerboard, black-and-white yin and yang, space s

Sport Light Extreme Slx With R10 Hub

The Sport Light Extreme SLX with R10 Hub is a manual wheelchair wheel designed for use on sport wheelchairs. The double-walled, CNC machined, aluminum hub uses a 0.625-inch axle to reduce the risk of bending the axle during sports play. The wheel has either 18 or 24 spokes made of PBO fiber. DIMENSIONS: Diameterl is 24, 25, or 26 inches. Spokes are 4 millimeters diameter. COLOR: Spokes are black, white, red, yellow, blue, pink, green, or orange.

Sportlite 4000 & Active Ultra-Light

The Sportlite 4000, Active Ultra-Light is an adult manual, folding wheelchair designed for active individuals. FRAME: The frame is constructed of fully welded 7/8 inch stainless steel featuring an x-brace. Precision bearing on all wheels and caster forks, and heavy duty 1/2 inch axle are standard. Anti-tippers are included, they are adjustable and may be removed when not in use. SEAT: Standard seat sizes: seat width 18 inches, seat depth 16 inches, seat height 19 inches and backrest height 16.5

Sportrider

The SportRider is a 3-wheeled scooter designed for outdoor use by individuals or couples with lower extremity and mobility disabilities or as an alternative to driving. The scooter comes with a single captain seat or a dual bench seat. It can be operated with either two G-24 (75-79 amp hour) batteries or two G-27 (85-100 amp hour) batteries. FRAME (LxWxH): 65 x 29/36 x 44 inches. The frame has motorcycle styling, and the seat folds down for transport or storage. The SportRider has an underbody g

Sports Pac, Neon Sportspac, & Junior Sportspac

The Sports Pac WH160SP, Neon SportsPac WH160N, and Junior SportsPac WH160J are wheelchair back pouches designed for sports wheelchairs. The bags have an adjustable strap system that fits over the back of the chair. They have a main compartment, outer pocket, lid pocket and two outside mesh pockets with Velcro closures. The Neon SportsPac is the same as the original SportsPac, but constructed of mixed neon colors in packcloth and cordura. The Junior SportsPac is sized for smaller chairs. Optional

Spree Xt

The Spree XT is a child's folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Range of 36.5 to 44 x 29.5 (without anti-tips and front rigging) x 7.5 plus seat width for 12 or 20 inch wheels and 8.75 plus seat width for 22 or 24 inch wheels (all dimensions in inches). The folding tilt-in-space frame has folding crossbraces and two-way fold-down back canes. The depth and width of the crossbraces can grow with t

Sprint Gt

Sprint GT is a reclining powered wheelchair designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. FRAME (HxLxW): The steel frame is 102 x 85 x 65 to 67 centimeters. When the leg support is extended, the wheelchair length is 113 centimeters. SEAT (HxL): 54 x 39 to 50 centimeters. The back height is 45 centimeters. ARMRESTS: The arm support height is 20 to 25 centimeters. BRAKES: Included. WHEELS: Large volume pneumatic tires. FOOTRESTS: Includes l

Spry Knee Cruzer Elite New Model

The Spry Knee Cruzer Elite is a crutch-free knee walker designed for individuals recovering from Achilles tendon rupture, bunionectomy, foot or ankle surgery, hammer toe, gout, or diabetic off-loading. It is a highly maneuverable leg walker that fully supports your leg. The Spry Cruzer allows you to completely rest your injured limb while maintaining a healthy and active lifestyle. Strong and durable construction, height adjustable controls and a newly improved soft foam knee rest ensure your c

Stand-N-Ride (Model Snr And Snr2)

The Stand-N-Ride, model SNR and SNR2, is a 3-wheeled scooter designed for use by individuals or couples with lower extremity and mobility disabilities. It can used while standing or sitting. FRAME (LxWxH): 36.3 x 25.3 x (48-36) inches with anti-tippers,It can be disassembled into two parts for transport or storage. The Stand-N-Ride has an underbody ground clearance of 2.75 inches and a turning radius of 22 inches. The only available color is black. An optional detachable basket can be attached i

Standard Comfortline Armrest Series

The Standard Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests have foam padding covered in molded satin vinyl and are available in fixed or flip- away models for both right and left wheelchair arms. These armrests feature a molded cup holder recess. DIMENSIONS (WxD): 9.5 inches wide at the widest point, tapering to 8 inches x 22 inches. The armrests have a .5-inch thick wood base

Standard Curved Padded Headrest (Model Hrc100)

The Standard Curved Padded Headrest, model HRC100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. It has a contoured U shape for positioning, and foam padding with a zippered Triptex cover. DIMENSIONS: 11 x 4 inches. Padding is 2.5 inches deep.

Standard Scooter Tiller Bag

The Standard Scooter Tiller Bag is a storage bag for individuals who use scooters. The bag mounts to the scooter tiller handles both in front or behind the scooter tiller.The hook-and-loop straps prevent the bag from swinging on the scooter tiller.

Standard Viewline Plus Armrest Series

The Standard Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. The armrests are fabricated of transparent, unbreakable, scratch-resistant polycarbonate and are available in fixed or flip-away styles for both right and left wheelchair arms, and are available in armrest only or armrest with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 9.5 inches wide at the widest point, tapering to 8 inches. COLOR: The plas

Standard Woodline Light Reversible Armrest

The Standard Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest comes standard with a clear lacquer finish and is designed to be assembled by the user in either a right or left configuration. Model 31326 is a fixed armrest and Model 31328 is a flip-away style; all necessary mounting hardware is included with both models. DIMENSIONS: 3/8 inch thick x 22 inch

Standing Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a standing wheelchair for individuals with mobility disabilities and other individuals who use wheelchairers. Similar to the Segway, the Standing Wheelchair is a two-wheeled cruiser designed to provide with a way to travel while standing. The wheels underneath the Standing Wheelchair perform the same function as those of a regular wheelchair; however, the person is actually standing rather than sitting. The user's legs are held in place

Standing Wheelchair

This is a standard wheelchair with custom adaptations converted into a manual stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. By putting the body in a standing position, the chair provides users with better blood circulation, kidney and bladder functioning, as well as muscle tone. In addition the ability to place persons in a standing position reduces muscle contracture and bone decalcification, thereby reduc

Stash And Flash Wheelchair Backpack

The Stash and Flash Wheelchair Backpack is a wheelchair back pouch designed for wheelchair users. The bag fits wheelchairs 14 to 18 inches wide without rubbing wheels and can be used with wheelchairs with or without handles. Features include netted pockets for holding water bottles and mobile phones within easy reach without having to open the bag. Other features include a reflective strip to improve visibility at night making it visible for drivers, zipped pockets for keys and other personal it

Stay Put Commode, The Non-Transfer Commode

The Stay Put Commode is a wheelchair attachable commode that is specifically designed for wheelchair users who cannot independently transfer out of their wheelchair to a toilet or standard commode. The Stay Put Commode replaces the standard wheelchair seat, but it allows the user to maintain the comfort and mobility of their standard chair.

Stealth Elite Headrest (Model Sm-Se210)

The Stealth Elite Headrest, model SM-SE210, is a headrest designed for use by individuals who use wheelchairs. This headrest is intended for individuals who do not need a midline cue. The two lateral swing-away components can be used for switch mounting and if a sensor is added in the backpad, it can also be equipped for computer access.

Stealth Ultra Headrest (Model Sm-Su200)

The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad.

Steel Channel Bracket Attaching System (Model 30300)

The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product

Stellar

The Stellar is a manual, adjustable-tilt wheelchair designed for use by individuals with mobility disabilities. The chair offers a tilt of up to 45 degrees and hand or foot propulsion both in and out of tilt. The chair's low knee height can be maintained even when tilted. The chair is available with a standard or heavy-duty (HD) frame. FRAME (LxW): 30 to 37 without front rigging x 21.5, 25.5, 29, 30.5, 33, or 34.5 inches. Adjustable frame with dynamic tilt from zero to 45 degrees. Optional heavy

Stellato

The Stellato is an adult lightweight folding manual wheelchair designed for use by individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. FRAME: The lightweight frame has a swing-away front end and elliptical heavy duty crossbrace tubing. The overall width ranges from 22 to 28 inches. A small frame and a large frame are available. The seat-to-floor height for the small frame ranges from 13.25 to 18 inches, and from 15.5 to 19 inches for t

Storm Series Tdx3

The Storm Series TDX 3 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 41 (depending on seating system) x 35.25 x 25 (26.5 with joystick) inches. Includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include Basic Colors (Deep Purple, Cobalt Blue, Anthracite, Wet Black, Red, Silver Vein, Lavender, Wet Black with Twilight Sparkle,

Storm Series Tdx4

The Storm Series TDX 4 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41 (depending on seating system) x 35.25 x 25.5 inches (28.5 inches with 20-inch joystick). The frame includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet

Storm Series Tdx5

The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit

Streamer Compact Power Chair (Model 888Wb)

The Streamer Compact Power Chair, model 888WB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. Three-inch ant-tip wheels are standard. The chair disassembles for transport. The chai

Streamer Mid-Wheel Power Chair (Model 888Wnlb)

The Streamer Mid-Wheel Power Chair, model 888WNLB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. The chair disassembles for transport. The chair is available in blue, forest gree

Streamer Mid-Wheel Power Chair With Curb Skipper (Model 888Wnlb-Cs)

The Streamer Mid-Wheel Power Chair with Curb Skipper, model 888WNLB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inche

Streamer Sport (Model 888Wa)

The Streamer Sport, model 888WA, is powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxW): The overall dimensions, including the footplate, are 45 x 24 x 40 inches. The wheelbase is 41 x 23 inches with a ground clearance of 3 inches. The turning radius is 17.7 inches. Two rear 3-inch anti-tip wheels are standard. The chair disassembles for transport. The base is available in blue or burgundy.

Streamer Sport Power Chair With Curb Skipper (Model 888Wab-Cs)

The Streamer Sport Power Chair with Curb Skipper, model 888WAB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 38 x 22.5 x 27.5 to 40 inches. The wheelbase is 23.5 x 23 inches with a ground clearance of 3 inches. The turning radius is 27 inches with the footpl

Streamer Sport Rehab (Model 888Wa)

The Streamer Sport Rehab, model 888WA, is a powered wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 37 x 24 x 32 inches. The ground clearance is 3 inches, the turning radius is 17.7 inches. The base is available in red and blue. CONTROLS: Self-diagnosing PG Drives VSI Joystick Controller. RWD: Two 0.60-horsepower motors rear-wheel drive. SE

Street Corpus

The Street Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 42.25 x 24.75 inches; 32.5 x 24.75 inches (base only). The minimum dimensions for transport (HxLxW) are 31.5 x 32.5 x 24.75 inches. Minimum turning radius is 48 inches. The HD3 Corpus has a ground clearance of 2.4 inches and 4-wheel adjustable independent suspension. The base frame is available in black/gold, copper metallic and blu

Stretchair (Models Mc3, Mc4 & Mc4Hd)

The Stretchair is a combination wheelchair stretcher primarily designed to safely transfer patients from a prone position in bed onto the Stretchair an then slowly raise them to a partial or complete sitting position. The chair has a contour foam padded seat, back, armrests and footrest. Back adjustable from a full vertical sitting position to a horizontal prone position. The height of the armrests and footrests are adjustable. Toe operated wheelbrakes. Powder coated steel tubing frame; corrosio

Stroller With Drip Feeder Attached

CUSTOM ADAPTATIONPURPOSE: To enable a child with mobility and eating disabilities to be taken out of the house for longer periods of time. A drip feeder (consisting of a bag with liquid nutrients, a battery-powered electric pump, and flexible plastic tubing between the bag, pump and child) is mounted on a child's stroller. The pump is mounted on a wood post attached to the center of a metal base bolted to across the back of the stroller frame. The diameter of the post is identical to that of the

Sugru

Sugru is a self-setting rubber that can be formed by hand. It molds like play-dough, bonds to myriad materials and turns into a strong, flexible silicone rubber within 24 hours. It can be used for many do it yourself projects to assist people with disabilities, such as making a dial suit arthritic fingers, add tactile grip to a 3D printed prosthetic, pad sharp edges on wheelchairs, etc. Other uses can be found at: http://sugru.com/great-for/disability

Sun

TheSun is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This custom wheel has mirror bright, machine polished surfaces, and is made from computer machined 6061-T-6 billet aluminum with double walled rims and sealed bearings. Hand rims are available with an anodized or vinyl-coated surface or with quad projection. DIMENSIONS: 24 or 25 inch diameter. CAPACITY: 250 pounds. WEIGHT: 3.9 to 4.4 pounds. COLOR: Natural alu

Sunfire Plus Power Rear Wheel Drive Wheelchair Base

The Sunfire Plus Power Rear Wheel Drive Wheelchair Base is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 39 x 24 inches. Available in blue, red, or gold, the chair is equipped with 2-inch solid rear-mounted anti-tip wheels. CONTROLS: Programmable PG controller with adjustable joystick mount. RWD: Two-motor rear wheel drive. SEAT: Swivel and reclining captain's seat with adjustable headrest and seat belt. ARMRESTS: Flip-back pa

Super Clamp

The Super Clamp is a mounting clamp for accessories designed to attach to wheelchair arms or any other kind of frame. The jaws of the clamp open up to a maximum of two inches wide. The clamp has a receptacle to screw into photographic or other equipment. The device is made of cast alloy with a high strength to weight ratio. The jaws are friction lined and screw operated. The clamp has a special detent operated safety lock that holds accessories in place even if the locking mechanism is not tight

Super Jogger

CUSTOM ADAPTATION PURPOSE: To provide outdoor mobility for a teenager with cerebral palsy. The teenager had outgrown the child’s jogging stroller she had used outdoors for hiking and rugged terrain. The existing three-wheeled jogging stroller was redesigned and rebuilt to accommodate her. To bring the center of gravity more over the wheels, the wheels were moved in relation to the chassis and the frame rebuilt. The original aluminum tubing was reused and extended where necessary. To widen the s

Super Light Portable Scooter

The Super Light Portable Scooter is designed for use by individuals with mobility disabilities. This unit comes standard with a headlight, a horn, and a rear basket. FRAME: Steel frame disassembles without tools for storage and transport and has a turning radius of 27.5 inches. CONTROLS: Handle mounted electronic controls. FWD: Front wheel drive. SEAT: Height-adjustable 360-degree swivel seat is 18 inches wide. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. BRAKES: Electromagnetic braking system

Super Scooter

The Super Scooter is a scooter board designed for use by children with mobility or balance disabilities. Made of durable 11-ply birch with a carpet top,the board has a handle on one side and a hole in the center to fit on scooter racks. The board also has special ball-shaped hard rubber casters that allow smooth movements with quick 90-degree turns. The Scooter is designed to move as easily over thick carpet as it does on hard smooth surfaces. DIMENSIONS: 16 x 16 inches.

Superstand Standing Wheelchair (Model Ss-1)

The SuperStand Standing Wheelchair, model SS-1, is a manual stand up wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. This is an adult manual wheelchair with a manual standing mechanism. The user operates the standing mechanism with a vinyl coated lever and is assisted to the standing position by two gas cylinders. FRAME (HxL sitting with leg rest): 35 x 41 inches. Length without leg rests is 29 inches. It has a rigid

Supertote Carryall

The SuperTote Carryall is a wheelchair side pouch or a carrying bag for a walker or crutch designed to provide carrying capability for people with mobility disabilities. Made of durable machine-washable nylon, this tote features pockets with zipper closure. DIMENSIONS: 9.5 x 7 x 4.5 inches. COLOR: Blue or black.

Support Fixture For Powered Wheelchair

---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a support fixture for a powered wheelchair for a woman with a progressive neurological disorder to travel independently away from the hospital with all her required medical pumps and support devices. This young woman is dependent on getting her food and medications through pumps attached to her powered wheelchair by a customized bracket. As her medical needs have increased she needed three additional pumps to meet her needs, but the bulk an

Swedish Design Volaris Rollator

The Swedish design Volaris rollator is designed for individuals who need assistance when walking. It folds up easily and the handles are adjustable in height with the pull of a knob. The large 8 inch wheels help to reduce walking time to places and promotes a natural walking pace. It is made of lightweight aluminum and "Acrylonitrile butadiene styrene"(ABS)plastic.

Swing Away Stump Support

The Swing Away Stump Support is an amputee leg support designed for use with wheelchairs. The device has a metal frame and a vinyl covered cushioned leg support for below knee amputees. Available for the right or left leg, the support adjusts horizontally and vertically. Models are available to fit a variety of chairs, including Everest & Jennings, Invacare, and Breezy.

Swing Away Tray (Model Sat126)

Durable 3/8 inch clear polycarbonate tray supports a weak or paralyzed arm. Acts as a portable writing or eating surface and/or reading support. Tray curves around body front during use, but quickly swings up and over wheelchair wheel for safe storage when not in use. Lightweight and has 5/8 inch protective white rubber trim that is removable for easy cleaning. Easy to install. Available for right or left side.

Swingaway Joystick Bracket

The Swing-Away Joystick Bracket is a joystick holder designed for midline and other special positioning needs. The bracket swings out of the way when transferring or pulling up to a table or desk. Five styles are available. The pull-pin release styles use the Miller's Swing Away Mounting Block (see separate entry). The push button styles operate with just a light to medium touch when strength or hand function is limited.

Swingaway Mounting Kit (Model 3150-1)

Mounting system for the 3185 joystick for chin oepration. Includes a 12 by 18 inch right angle mounting rod, custom sizes or bends can be provided. A 1/2 inch stainless steel mounting rod fits into a 3/4 inch vertical shaft and a swingaway strap clamp for attachemnt to a standard 7/8 inch diameter wheelchair/power recliner back bar. Permits the joystick to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting apparatus.

Swingaway Mounting Kit (Model 3205-2)

Unsed for mid-line mounting of a hand oeprated joystick. this mounting kit may also be used for mid-line mounting of other devices if the device accepts a 1/4-20 threaded bolt for attachment. Consists of a 1/2 inch diameter stainless steel mounting rod fitted to a 3/4 inch vertical shaft and a swingaway strap clamp for attachment to a standard 7/8 inch diamter armrest frame. A rod clamp is also included for mounting those joysticks which are not furnished with a rod clamp. permits the joystick t

Swingaway Mounting Kit (Model 3514)

Used for mounting a head operated actuator to the wheelchair back bar or push handle. The mounting kit consists of two right angle mounting rods joined by a double rod clamp and fitted to a pivot shaft, and a strap clamp for attachment to 7/8 inch diameter wheelchair tubing. Permits the actuator to be moved away from the user by an attendant and returned to its original position without the need to readjust the mounting.

Swinging Backpack

---- PROTOTYPE --------- PURPOSE: A group of seven students from a Wethersfield, CT high school developed the Easy Access Transport System (EATS). The device is designed to solve a problem that a student with Charcot-Marie-Tooth (CMT) disease had accessing his books in his backpack on the back of his wheelchair. Over two months, the EATS was designed to allow the student with CMT to swing his backpack on hinges and bring it around to his lap so he could access his books. The students started wit

Swish

The Swish is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Made from computer machined 6061-T-6 polished billet aluminum, it has mirror bright surfaces, double walled rims, and sealed bearings. Anodizing is available. Hand rims are available with quad projections or with an anodized or vinyl-covered surface. DIMENSIONS: 24- or 25-inch diameter. Hub width (bearing to bearing) 2.06 inches. CAPACITY: 250 pounds. WEIGHT

Switch Head Control (Model 3519)

A head operated switch actuator incorporating three Model 3265 Disc Switches. The Disc Switches are attached to adjustable monting hardware for positioning the switches consistent with the user's abilities. Normally used in conjunction with the Model 3450 Triswitch Input Controller, and mounted with the Model 3514 Swingaway Mounting Kit.

Switch It Opti-Stop

The Switch It Opti-Stop is a powered wheelchair controller designed for use by individuals who use powered wheelchairs. Intended for use with sip N’ puff controls in the latched mode, this device is used as a safety stop switch to automatically stop the wheelchair when the person driving the chair removes the tube from the mouth.

Switch It Remote Commander

The Switch It Remote Commander is an attendant controller designed for use by caregivers of wheelchair users. This remote device allows someone not sitting in the wheelchair to control the drive functions of the chair.

Switch It Remote Stop Switch

The Switch It Remote Stop Switch is a powered wheelchair controller designed for use by wheelchair users and their caregivers. The remote stop switch enables the user to stop the chair by pressing a button. This radio frequency based unit is designed to work within a single room for a distance of up to 30 feet. OPTIONS: Key chain remotes are available.

Switch Mounting Kit (Models Smt & Smw-1)

The Switch Mounting Kit for Tables, model SMT, and Switch Mounting Kit for Wheelchairs SMW-1, are control switch accessories for mounting switches in a variety of locations. Model SMT is designed for use on tables or table-like surface, and model SMW-1 is designed for use with wheelchairs. The Switch Mounting Kit for Tables includes a gooseneck, tilt-top switch mounts, and an adapter bracket to fasten it to tables or shelves. The Switch Mounting Kit for Wheelchairs has a tubular bracket for clam

Switch Options/ecu Module For Arrow Mcc (Model 1551M)

Optional module installed into Arrow MCC wheelchair controller. Provides for switch, sip'n'puff, rim head control of wheelchair. Attendant control input. Two connectors, each with 4 ECU output switch closures, to operate recliner or other devices. Module provides method of controlling accessories by only adding one switch to basic joystick; also allows other control techniques. May set 1, 3, or 5 forward speeds; selectable cruise mode allows control to be released while chair continues forward;

Switch Output Cable (Model 3329)

Used to expand the capability of a Multimode Interface by providing four isloated and independent switch closure outputs controlled by the Multimode's auxiliary operating mode. These outputs (minature phone plugs) may be used to operate various devices if the device is designed for oeration by one to four indpendent switches.

Switch Output Controller (Model 3340)

Used to expand the capbility of a Multimode Interface by providing four isolated and independent switch closure outputs controlled by the Multimode's auxillary operating mode. These outputs (miniature phone jacks) may be used to operate various devices if the device is designed for oepration by one to four independent switches. Includes additional circuitry to inhibit the Multimode's automatic reset function to allow uninterrupted operation.

Switched Head Arrays

The Switched Head Arrays are powered wheelchair controllers designed for use by individuals with severe physical disabilities or spinal cord injury. These arrays are an arrangement of electronic sensors in a head rest designed to enable control of the functions of a power wheelchair via head movement. These systems utilize an adjustable and growable three-pad headrest with one Zero-Touch Sensor (ZTS) in each pad. As standard, the right pad turns right, left turns left and center activates forwar

Swivel Tube Assembly (Models 1501, 1501-01, 1502, 1502-01, 1503, & 1503-01)

The Swivel Tube Assembly is headrest accessory interface hardware designed for positioning an occipital angle bar on a wheelchair. The Swivel Tube Assembly attaches to the rear of the occipital bar and slides through the 90-degree Vertical Tube attached to the wheelchair back. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLOR: Available in black and stainless steel.

Swivel Tube Assembly (Parts 1501, 1501-01, 1502, 1502-01, 1503, 1503-01)

The Swivel Tube Assembly is interface hardware designed for positioning a wheelchair headrest. The Swivel Tube Assembly attaches to the recessed area of the headrest. OPTIONS: A custom made Swivel Tube Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLOR:Both the original and the custom made options are available in black and stainless steel.

Swoosh

The Swoosh is a fully adjustable manual sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Rigid, rear tube assembly fully adjustable frame. Anti-tippers, frame protectors, and push handles are optional. The frame is available in more than 20 standard and custom finishes. SEAT (WxD): 13 to 18 inches x 14 to 19 inches deep. The folding backrest has an adjustable height and angle feature. The back height ranges from 8 to 18 inches. A back loc

Synthetic Lambskin Armrest Pads (Model Msc019670)

Synthetic Lambskin Armrest Pads, model MSC019670, are wheelchair armrest pads designed for use by individuals with mobility disabilities or spinal cord injury. The pads are flame-retardant, machine washable, and latex-free.

Synthetic Sheepskin Wheelchair Accessories (Models 703010, 703020, 703040, & 703050)

The Synthetic Sheepskin Wheelchair Accessories are a set of wheelchair armrest and legrest pads and seat and back cushion covers designed to provide comfort and protection for people who use wheelchairs. All items are made of high-pile synthetic sheepskin and are nonallergenic. Model 703010 is a pair of wheelchair armrest pads, model 703020 is a wheelchair legrest pad that fits between and over the legrests, model 703040 is a pair of footrest pads, and model 703050 is a set of a wheelchair seat

T Mods (Mod J)

Solid back insert modification for any Freedom Design solid backs. Backs are cut in the shape of a "T" to permit maximum adjustability of trunk supports. Only works with Econo-Ease Hardware.

T-Gel Plus Solid Seat Insert Cushion

The T-Gel Plus Solid Seat Insert (SSI) Cushion, models 1294 and 1295, is a combination cushion utilizing the Alimed Solid Seat Insert and a dry flotation T-Gel Plus Cushion (see separate entries). The cushion is intended to correct positioning of individuals in nsling seat style wheelchairs by providing a flatter sitting base. This semi-rigid base is 3.5 inches thick and creates a more stable sitting surface. DIMENSIONS:16 x 16 inches (no. 1294) or 16 x 18 inches (no. 1295).

Tablet Arms Tray (Model 11H)

The Tablet Arms Tray 11H is a swing away lapboard designed for individuals who frequently transfer in and out of a wheelchair. This portable tablet sized tray can be carried in a wheelchair backpack or stored without obstruction by snapping it onto the side of the chair. The tray is made of clear, nearly unbreakable polycarbonate plastic with a rim. Trays are made for right or left hand use. WEIGHT: Approximately 5 pounds.

Tablet Holder with Mount, Model 1568

Tablet Holder with Mount is designed for a person who needs special physical placement. The mounting system  attaches to a wheelchair, tabletop, bedrail or tray. It is compatible with most tablets and e-book readers including the Kindle, Kindle Fire, Nook, Motorola Xoom, Samsung Galaxy Tablet and similar tablets.

Tailwind Power-Assist Wheelchair

Tailwind Power Assist Wheelchair is designed for use by individuals with mobility disabilities. It is a manual wheelchair that provides on-board power when you need it. The Tailwind Power Wheelchair is designed to help users safely navigate terrain with discreet electronics that direct quiet motors to provide either a smooth boost of power or gentle breaking as required. It can be used uphill, downhill, on carpet and on uneven surfaces. POWER: Rechargeable battery, Dry Cell, NiMH 8.4 Ah. SIZES:

Takeoff Sport And Wheelchair Gloves

TakeOff Sport and Wheelchair Gloves are push gloves designed for use by individuals who use wheelchairs. Made from Amaretta synthetic leather, these half-fingered gloves are lined with gel througout the palm and all five digits.These gloves also feature a reinforced leather web space, double stitching on the palms, seamless forefingers, terry cloth nylon/Lycra backs, and TakeOff tabs for easy glove removal. SIZES: Extra-small, small, medium, large, and extra-large. COLOR: Black with blue backs.

Takeoff Sport And Wheelchair Gloves-- Full Finger

TakeOff Sport and Wheelchair Gloves--Full Finger are push gloves designed for use by individuals who use wheelchairs. These full-fingered gloves are lined with gel througout the palm and all five digits.These gloves also feature a reinforced leather web space, double stitching on the palms, seamless forefingers, terry cloth nylon/Lycra backs, and TakeOff tabs for easy glove removal. SIZES: Extra-small, small, medium, large, and extra-large. COLOR: Black with blue backs.

Takeoff Sport And Wheelchair Gloves-- Half Finger, Full Thumb

TakeOff Sport and Wheelchair Gloves--Half Finger, Full Thumb are push gloves designed for use by individuals who use wheelchairs. These half-fingered, full thumb gloves are lined with gel througout the palm and all five digits, and the thumb and palm are reinforced with rubber material for improved grip.These gloves also feature a reinforced leather web space, double stitching on the palms, seamless forefingers, terry cloth nylon/Lycra backs, and TakeOff tabs for easy glove removal. SIZES: Extra

Takeoff Sport And Wheelchair Gloves--Half Finger

TakeOff Sport and Wheelchair Gloves--Half Finger are push gloves designed for use by individuals who use wheelchairs. Made from cabretta leather, these half-fingered gloves are lined with gel througout the palm and all five digits.These gloves also feature a reinforced leather web space, double stitching on the palms, seamless forefingers, terry cloth nylon/Lycra backs, and TakeOff tabs for easy glove removal. SIZES: Extra-small, small, medium, large, and extra-large. COLOR: Black with blue back

Tandem Electric Wheelchair

---- PROTOTYPE --------- PURPOSE: To design a prototype of a simple, fun, and sporty aesthetic electric vehicle for individuals with lower extremity or mobility disabilities, people with spinal cord injury and others who use a wheelchair. After spending an extended period of time in a wheelchair to better understand the challenges of wheelchair users and individuals with disabilities, designer Alexandre Pain, proposed that it was the stigma associated with the wheelchair that appeared to be one

Tank Chair

The Tank Chair is a heavy duty powered wheelchair designed for off-road use by individuals with lower extremity or mobility disabilities or spinal cord injury. With its tank-style rubber tracks and a high-torque electric motors, this custom all-weather off-road wheelchair can go into outdoor environments including streams, mud, snow, sand, and gravel. FRAME: One-Piece Steel Chassis with custom colors. MOTOR: 24 volt/2 horsepower continuous/2700 revolutions per minute/variable speed motor. POWER:

Tarsalrest Adjustable Foot Support (Model Fr19Aj)

The TarsalRest Adjustable Foot Support, model FR19AJ, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. The extra height with this support is ideal for any one who works on a stool or high chair. The adjustability makes it versatile for different environments or tasks. The non-skid platform is rubbe

Tarsalrest Foot Support (Model Fr19 & Fr19X)

The TarsalRest Foot Support, models FR19 and FR19X, are a foot supports designed to promote proper posture, reduce fatigue and back strain, and relieve stress on the legs, back and neck. They are ideal for providing circulation in the legs and feet. These foot supports feature a chrome frame that is durable and lightweight, a non-skid platform surface that won't damage shoes, and a tiliting support platform that allows users to vary their leg position. DIMENSIONS: Two models available in 3 or 6

Tash Sip 'n' Puff Adaptor (Model 32676), 1555 Adaptor (Model 32677), Joystick Adaptor (Model 32678), Mk2 Adaptor (Model 32679), & Adaptor Clamp Bushing (Model 32687)

Adaptor Clamps are switch mounting hardware designed to secure controls to wheelchairs. All models are made of steel and coated with black baked epoxy. The TASH/Sip-N-Puff Adaptor, Model 32676, is designed to hold the TASH joystick and other controls. The unit is equipped with a metal loop which allows the electrical cord to be slipped through without removing the end plug. Model 32677, the 1555 Adaptor, is a clamp designed to hold the Invacare 1555 remote joystick by utilizing existing joystick

Tech Table

Tech Table is a lap tray designed for use by individuals who use wheelchairs or scooters. The unit features a zippered Cordura nylon case with straps with buckles to secure it to the wheelchair, a handle for transfers, and a removable, wipe clean ABS plastic top that is suitable for reading, writing, dining, and recreation. The padded, foam-lined storage area under the top features five organizer pockets and accommodates books, files, pens, wallets, calculators, etc. The case includes two straps

Tek Robotic Mobilisation Device

TEK Robotic Mobilization Device is a standing wheelchair that allows users with lower extremity or physical disabilities to navigate through various environments not typically accessible by wheelchair. The user can board the TEK Robotic Mobilization Device securely from a seated position such as a wheelchair or mat. The suspension system contains a gas spring, which balances the weight of the user so that standing up requires a gentle pull. Tek Robotic Mobilization Device holds the user in an

Tek Robotic Mobilisation Device

---- PROTOTYPE --------- PURPOSE: To design a prototype of a standing wheelchair that allows users with lower extremity or mobility disabilities or spinal cord injury to navigate through various environments not designed for use by people who use wheelchairs. The Tek Robotic Mobilisation Device is a powered stand up wheelchair developed by a team of Turkish scientists, led by Necati Hacikadiroglu. The device expands the way wheelchair users can interact with their environment. Wheelchairs genera

Teknique Fwd

The Teknique FWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 41.9 x 25 inches. It has a turning radius of 24 inches and a ground clearance of 3.6 inches. Front anti-tip wheels are included. A cup holder and side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONTROLS: Programmable microprocessor controller. The armrest-mounted j

Teknique Gt

The Teknique GT is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42.5 x 25.3 inches. It has a turning radius of 37 inches, a ground clearance of 4.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor control

Teknique Rwd

The Teknique RWD is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 42 x 25 inches. It has a turning radius of 36 inches, a ground clearance of 2.5 inches, and a 2-inch maximum step climb for small bumps or floor raises. The base is available in black, red, teal, purple, yellow, blue or white. A cup holder and side tote bag are included. CONTROLS: Programmable microprocessor controller

Teknique Xhd

The Teknique XHD is a heavy-duty powered wheelchair designed for use by large individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): This power base chair is 47 x 27.5 inches. It has a turning radius of 28 inches, a ground clearance of 3.7 inches, and a 3-inch maximum step climb for small bumps or floor raises. Front anti-tip wheels, a cup holder and a side tote bag are included. The base is available in black, red, teal, purple, yellow, blue or white. CONT

Telescoping Mount Hardware For Wheelchair Tray (Model 11.1)

The Telescoping Mount Hardware for Wheelchair Tray, model 11.1, is lapboard mounting hardware designed to secure trays to wheelchairs. This system includes powder coated arms, tubes, rings and poly-lock pegs to enable a lapboard or tray to be mounted to a wheelchair. WEIGHT: 15 pounds.

Temporary Wheelchair Headrest

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Allows those without a wheelchair headrest to have a supportive rest that can be efficiently attached and removed from the chair. PVC pipes are attached to the chair and foam cover as well as vinyl create a soft cushion for the head. COMMENTS: The headrest allows those with a wheelchair to have a cushioned head support.

Tennis Elite

The Tennis Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS:

Terminator

The Terminator is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This billet aluminum wheelchair wheel is composed of 6061-T6511 aircraft quality aluminum plate. It is CNC precision machined. Polished aluminum handrims are included. DIMENSIONS: 24 or 25 inch diameter, 1 inch width. CAPACITY: 250 pounds. COLOR: Natural aluminum with optional gold, red, blue, purple, or black anodizing. Hand rims are available with cl

Terratrek

The TerraTrek is a child's or adult manual wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This all-terrain chair can be used in mud, snow, sand, and grass. FRAME: The lightweight rigid frame is made of chromoly steel and is available in red, black, yellow, blue, and hunter green. Custom colors are also available. .SEAT: The seat has a front seat height of 21 inches and a rear seat height of 16 to 19 inches. It features clothing guards and an adjustable

The All-Terrain Wheelchair

The All-Terrain Wheelchair is a beach wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This beach wheelchair comes with a commercial tilt umbrella. FRAME: Non-corrosive PVC frame with 316L stainless steel ball bearings. WHEELS: Roleez balloon wheels from Roleez Wheels, Inc. (see separate entry). The wheels have a 19.3-inch radius and are 9 inches wide. FOOTREST: Stainless steel footrests. WARRANTY: Two years.

The Communication Station

The Communication Station is a wheelchair mounting kit for communicators designed to clamp an augmentative device to a wheelchair for individuals who are non-verbal and use a wheelchair. It is designed to "lock in" communciation devices at the right height, position and angle. The monoclamp is the key to the Communciation Station and can be configured in various combinations with almost limitless possibilities. The family of mounts can adapt any device to the left or right side of any wheelchair

The Flyer

The Flyer is a battery powered scooter designed to disassemble into five lightweight components in 60 seconds or less for persons with mobility disablities and limited hand strength. For this scooter, no tools are need for assembly/disassembly, and the electrical connections are made automatically when re-assembling. It is made of rust-free aluminum and can be stowed in trunks of most cars without the aid of a lifter. The scooter features a single level tiller for maneuvering; a large front bask

Thebug

TheBug is a child's stroller and manual wheelchair designed for use by children with neurological disabilities, mobility disabilities, lower extremity disabilities, or spinal cord injury. This child's wheelchair / stroller can be transformed from a low-mount stroller to a manual tilt in space wheelchair with either a front or rear wheel drive configuration using the same frame. The upper assembly can also be separated and attached to a powered wheelchair (not included). FRAME: Re-configurable fr

Therapedic Umbrella Stroller (Model 2300)

The TheraPedic Umbrella Stroller, model 2300, is a stroller base for detachable car seat designed for use by children with balance, neurological, or severe physical disabilities. This lightweight folding stroller base accepts the Columbia TheraPedic Positioning Seat (see separate entry). FRAME (HxLxW): The aluminum frame with steel reinforcements is 36 x 45.5 x 24 inches. SEAT (LxW): 15.5 to 18.5 x 16 inches. The distance from the floor to the seat is 24 inches. The seat depth is adjustable and

Therapeutic Fold-A-Buggy (Model Ap 118-15)

The Therapeutic Fold-A-Buggy, model AP 118-15, is a stroller and positioning chair designed for use by children with neurological disabilities or severe physical disabilities. This lightweight buggy provides positioning during transport and folds for storage in a car trunk. FRAME: The steel tubing frame has reversible handles. SEAT (WxD): 13 x 10 to 13 inches. The seat has a three-point positioning belt with a depth adjustable crotch strap. The back height is 21 inches. The back also offers vari

Therapeutic Roller Rider (Model Ap 5003)

The Therapeutic Roller Rider, model AP 5003, is a scooter board with trunk support designed for use by children with poor trunk control and weak lower extremities. By moving the handlebars from side to side, the child can play independently. Upturned handlebars encourage trunk extension and rotation, while promoting shoulder stability and upper extremity reciprocal movement. The board has a footplate to position the feet and an adjustable lower extremity strap. The board also has a padded back s

Therapy Stroller (Model G3446-Cx10), Therapy Stroller Ages 4-13 (Model G5091- Cx12)

Lightweight, compact folding stroller with complete adjustability, full range of corrective positioning options and folding mechanism that eliminates slump and the hazard of accidental folding. Fabric is easily removed for washing. 4J junior cruiser for infants to 5 years (model G3446,) measures seat depth 8 to 12 inches, seat width 11 inches, seat back height 21 inches, holds up to 100 pounds and 45 inch child. 4M cruiser for children 4 to 13 years (model 5091,) seat depth 9 1/2 to 14 1/2 inche

Theraslide Transfer Boards

Theraslide Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are constructed from defect-free birch plywood and machined from 7-ply base board with 3 additional plies form-laminated over this surface from end to end, producing a smooth, uninterrupted surface. All edges are computer routed and the surface is machine- and hand-sanded and finished with multiple coats of semi-gloss lacquer/sealer. Models include the plain board, board with telescope and

Theratray (Models 31100 & 31105)

The Theratray, Models 31100 and 31105, are lapboards designed for use by people who use wheelchairs. The trays are fabricated of polyurethane foam to eliminate sharp edges, and strengthened by a 0.25-inch Aspernite wood insert. Both models include a fully molded rim and straps. DIMENSIONS: The Adult model (no. 31100) is 23.5 x 22 inches, with a 15 x 9 inches torso cutout. The oblong juvenile size (no. 31105) is 26.5 x 24 inches, with a 10.5 x 6 inches torso cutout. WARRANTY: The manufacturer war

Thirst Free

Thirst Free is a wheelchair drink holder designed to provide hands-free carrying of beverages for individuals with mobility disabilities. The adjustable, plastic device features a wide body with a plastic ring to hold the cup. Molded clamps at the top and bottom of the device secure it to the side rails of wheechairs, bed rails, and the front horizontal bars of walkers.

Thomashilfen Easys Stroller

The Thomashilfen EASyS Stroller is a child's stroller with a positioning seating system designed for use by children with neurological, mobility or severe physical disabilities. The stroller consists of a lightweight folding A-Chassis frame and the EASyS modular seating system. This stroller includes the Balance Safety System (BSS) to reduces the risk of the stroller tipping over by automatically sliding the seat forward when reclining the backrest, which shifts the center of gravity to a more s

Thomashilfen Quick Base (Q-Chassis) High-Low Base

Thomashilfen Quick Base (Q-Chassis) High-Low Base is an alternative frame designed for use by children with neurological and mobility disabilities. It that allows you to move the Thomashilfen seating systems from the mobility or stroller base, creating an indoor base that is great for family, therapy, or classroom inclusion. The Thomashilfen Quick Base is equipped with a patented tipping prevention function called the Balance Safety System or BSS. When the back of EASyS is reclined, the seat

Thomashilfen Thevo Twist Seating System

Thomashilfen Thevotwist Seating System is a manual stroller designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. Thomashilfen thevotwist stroller gives optimum support to child while allowing the possibility for small trunk movements. While seated in the Thevotwist stroller, users are able to use their arms and hands while being supported. The Stroller incorporates Micro-Stimulation technology and Balance Safety System. Thevotwist Stro

Thought Controlled Wheelchair-Mounted Robotic Arm

---- PROTOTYPE --------- PURPOSE: Scientists at the University of South Florida have created a prototype of a wheelchair-mounted robotic arm controlled by thought to be used by individuals with ALS or full body paralysis. This device will allow those with severely limited mobility to perform simple daily activities for him- herself. EEG scans have allowed patients with ALS to communicate through monitored electronic brain impulses (P300 brain waves). Using these EEG-related technologies with the

Three-Dimensional Aid For Teaching Wheelchair Maintenance.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Visual aid showing the interior and exterior components of a wheelchair. Developed as a training tool in wheelchair maintenance. Describes training tool designed to allow persons with little mechanical experience to see how wheelchair components interrelate. One side represents an exterior view of an intact wheelchair, the other depicts unassembled interior components (i.e., bearings, axles and front post guides). Lists material needed and describes co

Thriftytray (Models 31128, 31129, 31255, 31256)

Thriftytrays are lapboards designed for attaching to wheelchairs. These hardboard trays have rectangular work surfaces and are available in four models: Model 31129 is an adult tray with straps; Model 31128 is an adult tray with foam pads and straps; Model 31255 is the extra-wide tray with straps; Model 31256 is the extra-wide tray with foam pads and straps. DIMENSIONS (WxD): The adult trays are 23.5 x 22 inches with a 15 x 9 inch torso cutout; X-wide trays are 25.5 x 22 inches with a 15 x 9 inc

Thunder Tennis Sportschair

The Thunder Tennis Sportschair is a lightweight sport wheelchair designed for use playing tennis by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Aluminum frame built to customer specifications, including a custom camber. The frame can be painted in any color including splatter or fade. Side clothing guards are optional. CUSHION: 2-inch foam cushion with cover. UPHOLSTERY: Velcro adjustable upholstery. CASTERS: Single front caster and pivo

Tibby's Freedom

Tibby's Freedom is an all terrain cart designed to offer persons with muscular or mobility disabilities the ability to interact with their peers in a variety of environments. Designed for accessibilty, this cart is intended for on and off road use (i.e. beach, gravel, water, snow and ice) and is engineered to be environmentally safe. It can be transported in a van, truck or tilt trailor and can be loaded by a single person. It features front and rear wheel air-ride suspension; five point harness

Tilite Youth Yg Series (Models Yg & Ygs)

The TiLite Youth YG Series is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair has adjustable frame dimensions and seat width and length to allow for the child's growth. FRAME: Rigid titanium frame with expandable camber tube that adjusts for height and center of gravity. The chair is available with 70, 80, or 85 degree frame front angles; model YG has a fixed front end and model YGS has a swing

Tilite Youth Yr Series (Models Yr & Yra)

The TiLite Youth YR Series is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Rigid titanium frame with satin finish. Model YRA has an adjustable center of gravity. SEAT (LxW): 12 x 12 to 20 x 20 inches. Model YRA has adjustable front and rear seat heights. A folding aluminum height- and angle-adjustable back is standard; options include a non-folding, titanium, fixed height and angle back and a

Tilt In Space Systems

Tilt In Space Systems are powered tilt in space systems designed for use with power-base style powered wheelchairs. This system fits Invacare, Quickie, Jazzy, Everest & Jennings power bases and offers up to 57 degrees of tilt. Standard features include a solid contoured back with high-density foam and a Cordura-Lycra cover, full-length muti-mount back rails, a flat solid seat pan for ease in cushion installation or change, a Rock-n-Lock Akton Gel headrest with a Cordura-Lycra cover, hardware

Tilt Seat

CUSTOM ADAPTATION PURPOSE: To provide a custom tilt seat for a powered wheelchair. Accelerated Rehab in Texas creates after market seating systems for wheelchairs. A system that meets the needs of the user is created to fit any wheelchair to custom measurements. The existing tilt seat no longer provided sufficient support for the user. The new seat was taller and an adjustable headrest was added to the back. The adjustments were made using a J2 back. Flip-up armrests and new footrest hangers we

Tilt'n Turner

The Tilt 'n Turner is a communicator or computer mounting kit for wheelchair or a camera mount for wheelchair designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. The device can also be used to mount trays, easels, reading stands, remote controls and more. The device is equipped with a quick-release mounting plate offering 0 to 90 degrees of tilt and a paddle to unlock the joint to rotate the attached tray or device 360 degrees. There are 12 memor

Tilt, The

Reclining wheelchair conversion transforms a normal reclining wheelchair frame into an orientation in space wheelchair frame. Maintains a fixed hip position. Seat width adjusts 14 to 18 inches. Seat depth adjusts 19 to 23 inches. Standard front rigging includes footrests only, does not include elevating legrest pads. Includes mounting hardware, one allen key, four wheelchair telescope tube spacers, and instructions included. Available in five models: tilt with no arms, full length arms, desk arm

Tilt-A-Tray Adjustable Wheelchair Tray (Models H70670-0000 & H70670-0001)

The Tilt-A-Tray Adjustable Wheelchair Tray is a swing away lapboard designed to adjust vertically and tilt forward and back. The tray is attached to the wheelchair frame and swings away for access to the chair seat. The tray is made of clear polycarbonate and has front and rear edge bars. The right side is mounted to a hinged bar and the left side is held by suction cups mounted to adjustable bars. Fittings are molded of high-strength ABS plastic. Extension rods and braces are made of stainless

Tiracer

The TiRacer is a three-wheeled racing wheelchair. FRAME: Handmade seamless titanium frame with a bead-blast finish. An optional polished titanium finish is available. The titanium fork features a choice of high- or low-mount steering. FRONT WHEEL: The standard 28-spoke wheel features a RC percision-machined straight-pull hub and a black anodized rim. An optional Corima 10-spoke wheel is available. REAR WHEELS: The standard spoked rear wheels feature a black anodized RC hub and a choice of 14- to

Tiralo

Tiralo is a beach wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This lounge-style beach wheelchair moves on soft sand and also floats in water. FRAME: Folding aluminum frame with a pull-bar. Dimensions (LxW) are 68 x 43 inches unfolded and 55 x 41 inches folded. SEAT: Large lounge-chair style seat fits all sizes. A headrest is included. UPHOLSTERY: Non-allergenic, UV resistant, water resistant, ventilated seat fabric. ARMRESTS: Fl

Tiretyte Ii Heavy Duty Tire Sealant

Sealant is a ethylene-glycol based solution that remains in permanent liquid form. Can be used in all tube and tubeless tires, will seal up to a 1/4" puncture. Requires an injector pump ($40) for installation. Sealant sold in 5 gallon containers ($195).

Tisport X

The TiSport X is a sport wheelchair designed for everyday use. FRAME: Lightweight, folding titanium frame. A one-inch tapered front end with a choice of three front frame angles is standard. SEAT: An adjustable seat back is standard. ARMRESTS: Swing-away armrests are standard. BRAKES: A fully-adjustable high mount wheel lock is standard. An optional Unilock enables users to select push- or pull-to-lock. CASTERS: Six-inch front casters are standard. FOOTRESTS: Fixed footrests are standard. A one-

Tisport Xc

The TiSport XC is a custom-designed sport wheelchair designed for everyday use. FRAME: Lightweight, non-adjustable custom folding titanium frame. This custom frame enables users to select the front frame angle. SEAT: The seat-to-floor dimensions are selected by the customer. WHEELS: The consumer selects the permanent position of the axle.WEIGHT: 17 pounds.

Titanium Wheelchair

The Titanium Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Rigid welded titanium frame with 6-, 9-, 12-, or 15-degree camber. The standard frame color is titanium; Prizmatique colors are available upon request. Impact guards and fabric clothes protectors are optional. Custom modifications are available. SEAT (LxW): 14 to 18 x 13 to 18 inches. The floor to seat pan height is 21 to 24 inches, and the back heig

TJ Rampit USA Modular Ramp Systems

TJ Ramp Systems are designed for people using a wheelchair or people with mobility disabilities. The ramps are built to order with an emphasis on customizing to fit the needs of each particular case. 

Tms Padded Chair Belt

Padded belt support. Two 12 inch long canvas pads with webbing strap sewn at one end. Straps attach under wheelchair upholstery screws and canvas pads fit across abdomen. Velcro closure.

Tms Padded Chair Belt

Belt for wheelchair, webbing straps for attachement to chair, Wide padded canvas body strap, two rows of velcro for closure.

Tms Padded Legrest Panel

Padded legrest panel. With Velcro straps to attach panel to wheelchair legrest frame. Fits standard and narrow adult chair.

Tms Solids, Solid Insert Seats And Backs

Solid seat and back inserts. Plywood base with padded foam and vinyl cover. Available in standard adult, narrow adult. Fits over regular seat and back. Back secured over push handles with fabric loops.

Tms Wheelchair Pouch

Variety of wheelchair back pouches. Soft sided with cover flap. Strap loop on pouch slip over wheelchair push handles. Some with outer pockets. Variety of fabrics. Folds with wheelchair. DIMENSIONS: 14.5 x 12 inches or 14.5 x 17 inches. Specify narrow or regular wheelchair 12 or 14 inches wide.

To Narrow Your Chair.

--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Describes method to temporarily narrow a wheelchair. Suggests pulling the front or rear posts of the wheelchair together with a strong leather belt or a straightened coat hanger. AUTHOR: Lunt, S TITLE: Handbook for the Disabled: Ideas and Inventions for Easier Living REF: New York: Charles Scribner's Sons: p 212 NARIC CALL NUMBER: R1616 PAGES (including cover): 2 1982.

Toe Loop (Model 82)

The Toe Loop, model 82, is a toe strap designed to prevent the user's foot from slipping forward off the wheelchair footplate. The strap is equipped with buckles for adjustment and are attached to the front of the footplate.

Tom Pediatric Stroller

The TOM Pediatric Stroller is a lightweight tilt-in-space stroller designed for indoor and outdoor use by children or young adults with mobility or severe physical disabilities. The folding stroller is available in four sizes – Mini, Standard, Maxi and Super Maxi. FRAME (HxLxW): 39 to 45 x 33.5 x 24 inches (Mini and Standard); 40 to 46 x 36 x 25.5 inches (Maxi); and 42 x 43 x 27.5 inches (Super Maxi). Folded dimensions (HxLxW) are 21.5 x 36.5 x 24 inches (Mini and Standard); 24.5 x 37.5 x 25.25

Tommy

The Tommy is a child's manual wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Tubular frame with height-adjustable push handles and side panel clothing guards. SEAT: Height- and depth-adjustable firm seat. ARMRESTS: Arm support is height adjustable from 16.5 to 24 centimeters. WHEELS: Two rear wheels can be custom configured. FOOTRESTS: Height-adjustable leg supports with three different positions (0, 20, and 40 d

Tongue Drive System

---- PROTOTYPE --------- PURPOSE: To create a prototype of a powered wheelchair contol system operated by a tongue switch in dental retainer for individuals with upper and lower extremity, mobility or neurological disabilities or quadriplegia to navigate a powered wheelchair. The newest version of the Tongue Drive System uses a dental retainer with sensors to help control the system. The embedded sensors within the retainer track the movements of a small magnet attached to the tongue. The wirele

Tongue Drive System

---- PROTOTYPE --------- PURPOSE: Engineers at Georgia's Institute of Technology have developed a prototype that allows individuals with severe disabilities to operate a wheelchair or computer by moving their tongue. The prototype requires the user to have a small magnet the size of a grain of rice be pierced into his or her tongue. A companion device embedded with magnetic sensors, such as an orthodontic brace or headset, can then trace the movement of the tongue and transmit those signals wire

Top Drop Clamp Attaching System (Model 31070)

The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d

Top End Crossfire All Terrain Rigid Wheelchair

The Top End Crossfire All Terrain Rigid Wheelchair is an all-terrain sport wheelchair designed for use by adults with mobility or lower extremity disabilities or spinal cord injury. FRAME: Custom built rigid aluminum ultra-lightweight open frame or cantilever design. The center of gravity is available in an active position or an amputee position. The frame is available in a choice of wet black, black prism, copper penny, cosmic blue, electric blue, electric red, electric green, emerald green, fr

Top End Paul Schulte Signature Titanium Bb Wheelchair

The Top End Paul Schulte Signature Titanium BB is a basketball wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: 6061 T6 aluminum frame with welded-in-place offensive wing/bumper, fixed swivel anti-tip bar, and custom axle position, wheelbase, and center of gravity. The front frame angle is 80, 90, or 100 degrees. SEAT (LxW): 14 to 18 x 12 to 19 inches. Tapered seat width is optional. The floor- to-seat height is 16 to 21 inches in front and 13 t

Top End Racer

The Top End Racer is a three-wheeled racing wheelchair designed to allow people with mobility disabilities to participate in marathons and other racing events. The chair includes its own tool kit. FRAME: The rigid T-frame constructed of 6061 T6 aircraft aluminum alloy is available in open V-cage or I-cage. The upper and lower frame width is available in one inch increments from 11 to 15 inches. The overall length varies from 36 inches to 62 inches. The chair features a chrome-moly fork with comp

Top End T-3

The Top End T-3 is a three-wheel sports wheelchair designed to provide increased maneuverability to wheelchair athletes for sports such as basketball and tennis. FRAME: Made from 6061 T6 aluminum, the frame is available with an open T-frame for wheelchair tennis or a basketball frame, which features an additional tubular, U-shaped leg guard. The frame is available in 30 standard Imron colors, or in optional neon, splatter, candy, or two-tone non-neon colors. SEAT: Bucket-style standard; adjustab

Top End Terminator Everyday Wheelchair

The Top End Terminator Everyday Wheelchair is a lightweight manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height, and front frame angle. Options include curved or square rear frame, tapered or V front frame, rear suspension system, Frog Legs suspensi

Top End Terminator Titanium Wheelchair

The Top End-Terminator Titanium Wheelchair is a heavy-duty manual wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Custom-built rigid lightweight frame with 1-inch diameter chrome-moly tubing. Custom dimensions include position of front caster housings, adjustable center of gravity, front and rear seat height and front frame angle. Options include curved or square rear frame, tapered or V front frame, a rear suspension system, anti-tip bars, and

Top End X-Terminator Qr Sports Wheelchair

The Top End X-Terminator QR Sports Wheelchair is a sports wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair is specifically designed for playing quad rugby. FRAME: The frame is custom 4130 chrome moly steel. It features an adjustable center of gravity, an offensive wing in front of or behind the caster housings, fixed or folding aluminum side guards, front and rear frame protectors, a swivel QR anti-tip bar and detachable push handles. SEAT:

TopChair S

The TopChair S is a electronic seat intended to help people in wheelchairs or with mobility disabilities to move independently. Is designed in three different models.

Tornado Allsport

The Tornado Allsport is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. It can be used for different sports, including tennis, basketball, and softball, and can also be customized for quad rugby (see also separate entry for Tornado QR). FRAME: Fully welded aluminum frame in custom size and with custom color, including splatter or fade. Side clothing guards are optional. UPHOLSTERY: Velcro adjustable upholstery. CASTERS: Sing

Tornado Basketball Chair

The Tornado Basketball Chair is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: 6061 T6 aluminum frame with anti-pick bars, built to the user's size specifications with a choice of adjustable or solid parts. The frame can be custom painted in any color. SEAT: Sliding back for adjustable center of gravity. CUSHION: 2-inch covered foam cushion. UPHOLSTERY: Tension- adjustable upholstery. CASTERS: Includes pivoting fifth

Tornado Qr

Tornado QR is a sport wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: All aluminum frame custom built to the user's size and position. The frame includes a bumper and wings in a variety of optional styles, and is available in any color, including splash. UPHOLSTERY: Includes adjustable upohstery. WHEELS: Wheels come with Sun Metals heat treated rims, high flange hubs, Primo tires, and a fully welded axle. Spinergy wheels ar

Totalift-Ii Transfer / Transport Chair

The TotaLift-II Transfer/Transport chair is a chair stretcher and transport wheelchair designed for use with people with physical disabilities. As a stretcher, it adjusts to bed height and remains flat while the patient is transferred. TotaLift-II also converts into a chair with an adjustable seat and back angles and leg and foot rests. Total-Lift II also allows quick set up of the Trendelenberg and CPR positions. The unit includes a two-inch foam mattress pad with lumbar support, brake/steer lo

Tracabout Individual Recreational Vehicle 2000 (Irv 2000)

The TRACABOUT Individual Recreational Vehicle 2000 (IRV 2000) is a powered wheelchair designed for indoor and outdoor use by individuals with mobility disabilities. This chair crosses soft surfaces, plowed earth, snow, mud, ruts, sticks, and other obstacles less than four inches high and also maneuvers within the home. FRAME (LxW): 38 x 28 inches and fits through most standard doorways. The chair turns in its own length with a zero turning radius. CONTROLS: Joystick controller mounted on the arm

Tracker Youth Manual Wheelchair (Model 5810Q-Gr-61)

The Tracker Youth Manual Wheelchair, model 5810Q-GR-61, is a child's manual wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: Chrome frame. Options include an oxygen holder, a wheeled front or rear anti-tip attachment, a patient records holder, and an IV rod holder. SEAT (LxW): 13.5 x 12 to 16 inches in 1-inch increments. The back is fixed. An optional power assist reclining back is available in all

Tracker Youth Recliner (Model 5810Q-Gr-61-78)

The Tracker Youth Recliner, model 5810Q-GR-61-78, is a child's manual reclining wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This reclining wheelchair is identical to the Tracker Youth Manual Wheelchair (see separate entry), except that it has a power-assist reclining back. FRAME: Chrome frame. Options include an oxygen holder, a wheeled front or rear anti-tip attachment, a patient records holder, and

Traditional Wheelchair With Footrests (Model 37311)

The Traditional Wheelchair with Footrests, model 37311, is a manual adult wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding frame with push handles, triple chrome-plated carbon steel side panels, and telescoping seat rail support tubes under the chair. SEAT: 18 inches wide with a heavy-duty inner liner. ARMRESTS: Fixed armrests. FOOTRESTS: Lightweight composite footplates. CAPACITY: 250 pounds. WEIGHT: 40 pounds. WARRANTY: Frame and cross

Transfer Board (Model 765)

The Transfer Board, model 765, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It has gradually tapered ends and is constructed of hardwood and has a smooth, natural finish. DIMENSIONS (WxLxT): 8 x 30 x 0.75 inches.

Transfer Board (Model 765H)

The Transfer Board, model 765H, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It features hand slots with tapered ends, and it is constructed of 14 ply hardwood with a smooth, natural finish. DIMENSIONS (WxLxD): 8 x 30 x 0.75 inches; hand slots 19 inches apart.

Transfer Boards

Transfer board made of solid red oak electronically glued for strength and crack resistance. Finished boards are coated with urethane sealer and polished. Unfinished boards are sanded smooth and are ready to finish. Boards are 8 inches wide, available without hand hole, with one hand hole or with 2 hand holes, and in 24 or 30 inch lengths.

Transfer Chair (Model Tc-400)

Transfer chair for in-house transfers. Chair is made of PVC tubing with removable polyester padded cushions. Push handle across back for attendant. Full length armrests. Swingaway footrests. Four 4 inch casters, 2 locking. Optional swingaway arms. Available in eight colors. Width 24 inches, overall height 38 inches, depth 28 inches. Weight 24 pounds. Maximum capacity 300 pounds. .

Transparent Trays

Transparent Trays are lapboards made of a see through polycarbonate plastic. The trays enable open visual field for safer wheelchair mobility. Several models are available: an adult model with an anodized aluminum rim (no. 8696, $67) and an adult model without a rim (no. 8242, $72.33) with Velcro straps, and a pediatric model (no. 8306, $105.45) with Velcro straps. DIMENSIONS: Adult size models are 23.5 x 22 inches; pediatric size is 20.5 x 18 inches; all models are .25 inches thick.

Transport 19-Inch Wheelchair (Model 41000)

The Transport 19-inch Wheelchair, model 41000, is a manual transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Tubular frame with fold-down rear push handles. UPHOLSTERY: Nylon upholstery. ARMRESTS: Padded armrests. WHEELS: Composite wheels. FOOTRESTS: Swing-away footrests with diecast aluminum footplates. WEIGHT: 26 pounds without footrests. WARRANTY: Limited lifetime warranty.

Transport Wheelchair

The Transport Wheelchair is designed for use by individuals with mobility disabilities. FRAME: This lightweight, attendant-propelled wheelchair is 19 inches wide open, folds for transport and storage, and includes push handles. ARMRESTS: Fixed padded armrests. BRAKES: Toggle foot-operated brakes on the rear casters. CASTERS: Four 8-inch mag caster wheels. FOOTRESTS: Removable footrests with flip-up footplates. CAPACITY: 250 pounds. WEIGHT: 27 pounds.

Travelabout 2811, Compact Lightweight

The 2811 TravelAbout is designed for all-purpose residential or institutional use by adults. FRAME: The frame is lightweight, when folded the wheelchair is 10 inches wide. The frame is constructed of heavy square steel x-brace that permits use by obese individuals. The Travel About frame is 20 inches wide. SEAT: Seat-to-floor height is 18 inches, seat width 18 inches, back height 15 inches. UPHOLSTERY: The upholstery is embossed with textilene inner liner, brown is the standard color. However, 1

Traveler Se

The Traveler SE is an adult manual folding wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 31.5 x (24.5, 26.5 or 28.5) x 35.5 inches. Steel frame with saddle-joint tubular construction with hammer-tone paint. The width is 12 inches when folded. SEAT (WxD): (16, 18 or 20) x 16 inches. The seat height adjusts to 18 or 20 inches. The seat back is 15.5 inches high. UPHOLSTERY: Black vinyl. ARMRESTS: Choice

Travelscoot

The TravelScoot is a folding lightweight scooter designed for use by individuals with mobility disabilities. FRAME (HxLxW): 34 x 37 x 23 inches, or 10 x 33.5 x 12 when folded. The frame is made from aircraft-grade polished and anodized aluminum. It comes with a heavy-duty carrying bag and fabric caddy, and accomodates a cane or pair of crutches. The handlebar height is adjustable. CONTROLS: Integrated controller. RWD: 24-volt, 250-Watt direct current (DC) motor. SEAT: 17-inch wide height-adjusta

Tray Attachment

This Tray Attachment is a wheelchair lapboard, to be used in conjunction with the "Bowling Ball Holder Ring". This attachment converts the Bowling Ball Holder Ring into a tray which may be used for dining, letter writing, as a class desk, etc. The tray is made of a waterproof material.

Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)

The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.

Tray Clamps (Model 31086)

Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.

Tray For Powered Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of a tray for a powered wheelchair for individuals with a C6 spinal cord injury (SCI) for use with power wheelchairs. The requirements for the tray are defined to meet the American with Disabilities Act (ADA) and through interviews with power wheelchair users. Power wheelchair users with this tray will have the ability to deploy a tray when needed; however, when not in use, the tray can be stored on the wheelchair. The final tray design is

Tray For Wheelchair

CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the tray was fashioned of PVC with a lip at the front made of aluminum angle to prevent items from falling off. The tray attaches to the wheelchair with Velcro for attachment and removal. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2, Winter 2001: p. 17. PAGES (including cover): 2 2001.

Tray Stay Clamping System (Model 31085)

The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad

Trayaway

The Trayaway is a swing-away lapboard designed for use by individuals who use powered wheelchairs. This armrest tray is designed for a universal fit on most commercially-available wheelchairs. The unit provides a functional armrest with a built-in tray that folds out for the user without assistance for working on a laptop, writing, reading, or eating. It is also designed to safely support a laptop communication device. Other features include a transparent reading surface that can be tilted to su

Traymate

Plastic tray that fits on arm of wheelchair or upholstered chair. Perpendicular leg rests against inside of chair arm, adjustable spring loaded leg locks tray in place on outside of chair arm. Cut out for cups. 9 by 13 inch surface. Folds for storage. Washable. Fits also on hospital beds.

Trays & Hardware

The Tray and Hardware are a lapboard and mounting hardware designed for wheelchairs. The polycarbonate tray may be ordered with or without flip locks. Requires cutting out for trunk, sanding edges, and mounting of flip locks. OPTIONS: Tray elbow protection pads also available as individual or full pad. Mounting hardware may be ordered separately. DIMENSIONS: 18 x 24 inches (Small) and 24 x 27 inches (Large).

Tremor

The Tremor is an all-terrain beach and snow wheelchair designed for individuals with mobility or lower extremity disabilities or spinal cord injury. FRAME: Ultra-lightweight, fully-adjustable frame. Anti-tips are optional. The frame is available in a variety of colors and patterns. Frame protectors are optional. SEAT (WxD): 14, 15, 16, 17, or 18 inches x 12, 13, 14, 15, or 16 inches are standard. Seat depths of 10, 11, 17, or 18 inches are available at an extra cost. Push handles, seat belt, and

Tri-Scoot

Three wheeled powered wheelchair alternative. Overall frame length 42 1/ 2 inches. Overall frame width 19 inches. 18 inch seat width. 16 inch seat depth. Bucket seat swivels 360 degrees. Adjustable seat height from 20 to 24 inches. 16 inch back height. 12 or 24 volt front wheel drive operation. 2 speed or variable speed control. Maximum speed 4 miles per hour. Use of 2 batteries doubles the range from 8 to 16 miles. Maximum weight capacity 180 pounds. Disassembles for transport. Weight not inclu

Tricycle-Based Hand-Powered Wheelchair

A tricycle-based wheelchair is designed to enable the user to exert less energy than required by a standard wheelchair while ensuring safety and comfort. The Tricycle-Based Hand-Powered Wheelchair allows persons with physical disabilities to exert less energy during travel, enjoy outdoor activities, and exercise upper body muscles. Since the wheelchair is a hand-powered tricycle, the user must have sufficient upper body strength to power it. The Tricycle-Based Hand-Powered Wheelchair can be us

Trimline Comfortline Armrest Series

The Trimline Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests are foam-padded and covered in satin finish vinyl. The armrests are available in fixed and flip-away styles for both right and left wheelchair arms and feature a molded cup holder recess. DIMENSIONS: .5 x 10.5 inches wide at the widest point, tapering to 6 inches x 22 inches. The foam padding is 1 inch thick. COLOR: Bl

Trimline Viewline Plus Armrest Series

The Trimline Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. Fabricated of transparent, unbreakable, scratch- resistant polycarbonate, the armrests are available in fixed or flip-away styles for both right and left wheelchair arms in tray only and tray with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 10.5 inches wide at the widest point, tapering to 6 inches. COLOR: The PVC plastic rims are black. WARRA

Trimline Woodline Light Reversible Armrest

The Trimline Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest has a clear lacquer finish and is designed to be assembled by the user in a right or left configuration. The necessary mounting hardware is included with the fixed model, Number 31302, and the flip-away model, Number 31309. DIMENSIONS: Both models are 3/8 inch thick x 22 inches deep x 10.5 inc

Triswitch Input Controller (Model 3450) & Varibrite Triswitch Display (Model 3460)

The Triswitch, in conjunction with three single-switch actuators, is used for mode selection and oepration of a Multimode Interface. Two of the switch actuators provide left and right actuator commands, while the third switch provides both forward and reverse commands. The display incorporates forward and reverse directional lights with corresponding arrows to provide a visual indication of forward/reverse switch selection. Five additional mode display light are provided to indicate when the Mul

Triton (Models Tr-24 & Tr-25)

The Triton, models TR-24 and TR-25, is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The wheel is made from computer machined 6061-T-6 polished billet aluminum with mirror bright surfaces, spin forged design, double walled rims, and sealed bearings. Hand rims are available with an anodized or vinyl-coated surface or with quad projection. DIMENSIONS: 24 inches (TR-24) or 25 inches (TR-25) diameter. CAPACITY: 250 poun

Truebalance

The TrueBalance is a wheelchair axle positioning system designed for use by clinicians and suppliers with people with mobility and lower extremity disabilities and spinal cord injury and others who use wheelchairs. It measures the stability of a person's wheelchair when occupied. The system allows a clinician or supplier to optimize the position of the rear axle which helps reduce rolling resistance, improve responsiveness, minimize impact from sidewalk cracks, and ease the ability to traverse c

Tsunami Al

The Tsunami AL is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is constructed of 6061-T6 aircraft aluminum. It is available in two optional versions – Heavy Duty and Transit System. The frame is available with no rear adjustment or 0.5-inch rear adjustment, and optional versions of the frame allow for adjustments of 1, 2 and 3 inches. The frame can be ordered with the center of

Tsunami Alx

The Tsunami ALX is a lightweight adult wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame is made of 7000 series tubing. The frame features center of gravity (CG) adjustment over a 1.75-inch range for amputee positions and 2.7-inch range for standard positions, both in 0.25-inch increments. The frame is also available in a Heavy Duty version. Various frame colors and finishes are available, and rear anti

Tsunami Little Wave & Tsunami Little Wave Xp

The Tsunami Little Wave and Tsunami Little Wave XP are children's manual wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The Little Wave is a available with a standard or a width grow-able (XP model) frame. The frame features Crescent center of gravity (CG) adjustment over a 1.75-inch range for amputee positions and 3.75-inch range for standard positions, both in 0.25-inch increments. The Little Wave XP includes

Tube Arm Bracket Attaching System (Models 31902 & 31907)

The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.

Tuffy Deluxe 867 (Models 867, 867E, 867N, & 867Ne)

The Tuffy Deluxe 867 is a folding manual wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 867 model, this wheelchair comes in narrow (models 867N and 867NE) versions. FRAME (HxLxW): 36 x 41 or 43 x 22.5 or 24.5 inches. The folded dimensions (LxW) are 31 x 10.5 inches. This chair has a triple chrome-plated steel folding frame with stainless steel side panels. Anti-tippers and

Tuffy Deluxe 887 (Models 887, 887E, 887N, 887Ne)

The Tuffy Deluxe 887 is a folding adult manual wheelchair designed for use by shorter adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 887 model, this wheelchair comes in narrow (models 887N and 887NE) versions. FRAME (HxLxW): 34 x 41 or 43 x 22.5 or 24.5 inches. Triple chrome plated steel folding frame with stainless steel side panels. The folded dimensions (LxW) are 30.5 x 10.5 inches. Anti-tippers and an

Tuffy Deluxe Standard Light 877 (Models 877, 877E, 877N, 877Ne, 877W, & 877We)

The Tuffy Deluxe Standard Light 877 is a folding adult manual wheelchair designed for use by individuals with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 877 model, this wheelchair comes in narrow (models 877N and 877NE) and wide (models 877W and 877WE) versions. FRAME (HxLxW): 36 x 41 or 43 x 24, 26 or 28 inches. The folded dimensions (LxW) are 31 x 11.5 inches. The chrome-plated folding frame has composite side

Tuffy Deluxe Wide Recliner 497 (Models 497E & 497Xe)

The Tuffy Deluxe Wide Recliner 497 is a manual reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 497E model, this wheelchair comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 50.5 x 30 or 32 inches. Folded dimensions (LxW) are 37 x 12 inches. The folding frame comes standard with double cross bar construction and reinforcement w

Tuffy Extra Wide 377 (Models 377, 377A, 377Ae, 377E, 377W, 377We, 377X, 377Xe)

The Tuffy Extra Wide 377 is a heavy duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 37.75 x 42 or 44 x 26, 28, 30 or 32 inches. This chair has triple chrome plated steel folding frame with stainless steel side panels. Double cross bar construction and reinforcement welds that strengthen design are standard. The folded dimensions (LxW) are 32 x 12 inches. Anti-tippers and an anti-fol

Tuffy Hemi 897 (Models 897, 897E, 897N, 897Ne, 897W, & 897We)

The Tuffy Hemi 897 is a heavy duty, folding manual wheelchair designed for use by short adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as amputees and those who propel a wheelchair by foot. In addition to the standard 897 model, this wheelchair comes in narrow (models 897N and 897NE) and wide (models 897W and 897WE) versions. FRAME (HxLxW): 34 x 41 or 43 x 24, 26, or 28 inches. The folded dimensions (LxW) are 30 x 11.5 inches. The chrome-plated,

Tuffy Pediatric Recliner 975 (Models 975Se, 975Ce, 975Ne)

The Tuffy Pediatric Recliner 975 is a manual reclining wheelchair with a manual reclining back designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 38 (with seat back upright) x 44 x (20, 22 or 24) inches. Triple chrome-plated frame with composite side panels. The folded dimensions (LxW) are 31 x 12 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxW): 15 x (12, 14 or 16) inches. The seat height is 16

Tuffy Recliner 477 (Models 477E, 477Ne, & 477We)

The Tuffy Recliner 477 is a manual, heavy-duty, reclining wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, severe physical, or neurological disabilities or spinal cord injury. In addition to the standard 477E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 48 x 24, 26 or 28 inches. The triple chrome-plated frame folds; the folded dimensions (LxW) are 34 x 12 inches. Anti-tippe

Tuffy Super Extra Wide 397 (Models 397, 397E, 397X, 397Xe, 397Y, 397Ye, 397Z, 397Ze, 397L, & 397Le)

The Tuffy Super Extra Wide 397 is a heavy-duty, folding manual wheelchair designed for use by large adults with lower extremity, mobility or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 44 or 46 x 30, 32, 34, or 38 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel folding frame has stainless steel side panels and double cross bar construction with reinforcement welds to strengthen the design. Anti-tippers and an anti-folding device are

Tuffy Transporter 800 (Models 800 And 800E)

The Tuffy Transporter 800 is an attendant-driven transport wheelchair for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 x 48 x (41 or 44.5) inches. The triple chrome-plated frame folds; the folded dimensions (LxW) are 31 x 10 inches. Anti-tippers and an anti-folding device are optional. SEAT (LxW): 16 x 18 inches. The seat height is 20 inches. A 16.75-inch high back is standard. A seatbelt and headrest extension are optional.

Tuffy Wide Hemi 352 (Models 352, 352E, 352X, & 352Xe)

The Tuffy Wide Hemi 352 is a heavy duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury, as well as amputees. In addition to the standard 352 model, this wheelchair comes in wide (models 352X and 352XE) versions. FRAME (HxLxW): 35.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 32 x 12 inches. Triple chrome plated steel folding frame has stainless steel side panels. Double cro

Tuffy Wide Hemi 356 (Models 356, 356E, 356X, & 356Xe)

The Tuffy Wide Hemi 356 is a heavy duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel a wheelchair by foot. In addition to the standard 356 model, this wheelchair comes in wide (356X and 356XE) versions. FRAME (HxLxW): 35.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel folding frame

Tuffy Wide Super Hemi 354 (Models 354, 354E, 354X, & 354Xe)

The Tuffy Wide Super Hemi 354 is a heavy-duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel a wheelchair by foot. In addition to the standard 354 model, this wheelchair comes in wide (354X and 354XE) versions. FRAME (HxLxW): 33.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 32 x 12 inches. The triple chrome plated steel folding

Tuffy Wide Super Hemi 358 (Models 358, 358E, 358X, & 358Sxe)

The Tuffy Wide Super Hemi 358 is a heavy-duty, folding manual wheelchair designed for use by shorter, large adults with lower extremity, mobility or neurological disabilities or spinal cord injury, as well as wide amputees and those who propel wheelchairs by foot. In addition to the standard 358 model, this wheelchair comes in wide (models 358X and 358SXE) versions. FRAME (HxLxW): 33.75 x 42 or 44 x 30 or 32 inches. The folded dimensions (LxW) are 34 x 12 inches. The triple chrome plated steel f

Tumble Forms 2 Ready Racer (Model 4770R)

The Tumble Forms 2 Ready Racer, model 4770R, is a hand propelled cart designed to help improve perceptual motor coordination for children with upper extremity and mobility disabilities. The cart is intended to improve perceptual motor skills, strengthen arms and upper trunk, and allow peer play for children 18 months to 5 years of age. The cart allows the child to play at peer level in indoor settings, and to maneuver in tight places. The cart moves easily over carpet and rough surfaces with min

Tumble Forms 2 Scooter Board (Model 4814B)

The Tumble Forms 2 Scooter Board, model 4814B, is designed for use by children with some sitting balance to encourage trunk control. Covered with special anti-microbial coating, this child-friendly padded scooter board helps develop children's neuro-motor control as they propel themselves in any direction. The scooter features a washable, waterproof covering; long-wearing 2-inch casters; and loop handles for holding.

Tumble Forms Jettmobile (Models 4768C & 4769C)

The Tumble Forms Jettmobile, model 4768C and model 4769C is a hand-propelled cart designed to develop neck, shoulder and arm muscle coordination and maintain the user in an extension position. Features include protective fenders, a hip strap for positioning, and concealed ball bearing casters. The cart includes 3 positioning shapes and an Abductor Wedge. DIMENSIONS: Two models are available. Model 4768C (Child) is 28 inches long for children up to 40 inches tall and model PC 4769C (Adolescent) i

Twin Wheelchair

The Twin Wheelchair is a lightweight adult manual wheelchair designed for use by individuals with mobility disabilities. FRAME: Lightweight folding aluminum and steel tube frame with double cross braces. This chair has one-piece die-cast aluminum side frames. Anti-tips are optional. SEAT: Available in standard, hemi, or super-hemi in a choice of 14, 16, 18, or 20 inches wide. The seat is angle-adjustable and the front and rear seat heights adjust from 15 to 19 inches. The backrest is available i

U Form Deep Contour Back

The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg

Uclamp Bundle (Wheelchair Umbrella Attachment Device)

The uClamp Bundle is a mounting clamp for wheelchair accessories designed for use by wheelchair users. The height-adjustable uClamp and extension pole enables the wheelchair user to have an umbrella attached to the clamp which, in turn, is fixed to either the frame of the arm or back section of a wheelchair or mobility vehicle. Each uClamp set comprises two clamps that work independently of each other. Both clamps are held together by a spindle and two tightening knobs, one at each end. Each ti

Ucosy Weathershield

The uCosy Weathershield is an umbrella for wheelchairs and strollers designed to protect a caregiver up to 6 feet, 4 inches tall pushing the mobility aid. The uCosy comprises a collapsible canopy made from durable nylon connected to telescoping poles fitted with uClamps (see also separate entry) capable of 360-degree rotation. Twin rotating uClamps attach simultaneously to the canopy poles and the structure of the wheelchair or stroller with the rotation controlled by simple turn-wheels. These c

Ultimate Plus Transport Chair (Model H3008)

The Ultimate Plus Transport Chair, model H3008, is a transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding lightweight aluminum frame in teal, red or blue with a one-finger latch to fold the back. Push handles with comfort grips are standard. The frame is 21.5 inches wide. SEAT: The seat is 19 inches high, 15.5 inches deep, and 16.5 inches wide between the front armrests and 18 inches wide at the center. UPHOLSTERY: Black fabric upholstery with vinyl sea

Ultimate Plus Transport Chair (Model H3012)

The Ultimate Plus Transport Chair, model H3012, is a transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding lightweight aluminum frame in teal, red silver, black, or blue with a one-finger latch to fold the back. Push handles with comfort grips are standard. The frame is 22 inches wide. SEAT: The seat is 19 inches high, 15.5 inches deep, and 16.5 inches wide between the front armrests and 18 inches wide at the center. UPHOLSTERY: Black fabric upholstery w

Ultimate Transport Chair (Models H1901 & H1902)

The Ultimate Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding chrome-plated frame with a one-finger latch to fold the back. Push handles with comfort grips are standard. The frame is 23 inches wide. SEAT: The seat is 18 inches high, 15.75 inches deep, and 17.5 inches wide between the front armrests and 19 inches wide at the center. UPHOLSTERY: Black fabric upholstery with nylon seat insert to prevent hammocking. ARMRESTS: Fixed

Ultimate Transport Chair (Models H1904B, H1904Fg, & H1904T)

The Ultimate Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame with a one-finger latch to fold the back. Push handles with comfort grips are standard. Model 1904B is metalic blue, model 104FG is metalic forest green, and model 1904T is metalic teal. The frame is 23 inches wide. SEAT: The seat is 18 inches high, 15.75 inches deep, and 17.5 inches wide between the front armrests and 19 inches wide at the center. UPHOLSTERY: M

Ultimate Transport Chair (Models H1905 & H1906)

The Ultimate Transport Chair is a transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding chrome-plated frame with a one-finger latch to fold the back. Push handles with comfort grips are standard. The frame on model H1905 is 21 inches wide and the frame on model H1906 is 23 inches wide. SEAT: The seat is 18 inches high and 15.75 inches deep on both models. The seat is 16 inches wide between the front armrests on model H1905 and 18 inches wide between the

Ultralight Designer Travel Chair

The Ultralight Designer Travel Chair is a lightweight wheelchair designed for individuals with limited or no lower body mobility. Chair is foldable has all terrain wheels and a maintenance free aluminum frame that wont rust. Features swing away footrests, seat belt, rear brakes, padded armrests, nylon seat and rear storage pouch.

Ultraslick Transfer Board

Transfer board to aid in transferring from wheelchair to bed or chair or toilet. Fiberglass laminated with hardwood. Lengths: 18, 24, or 30 inches. Available with or without hand holes on each end.

Under Seat Wheelchair Pouch (Model 16C203)

The Under Seat Wheelchair Pouch, model 16C203, is an under seat pocket designed for wheelchair users. This device is designed to provide storage space under the chair and is accessible from the front by the wheelchair user. Made of nylon, it fastens with buckles. DIMENSIONS: (HxLxW) 12 x 11 x 16 inches.

Under The Seat Pouch

Under seat pocket measures 7 1/2 inches wide, 12 inches long, and 2 inches deep. Nylon. Velcro Closure. Attaches to frame under the seat with adjustable velcro straps to keep it hanging forward. Colors: black, red, navy, royal blue, tan, brown, and light or dark gray.

Unimo Electric Treaded Wheelchair

---- PROTOTYPE --------- PURPOSE: To create a prototype of an electric wheelchair for hospitals and rehabilitation centers. Nano-Optonics Energy, a Japanese firm has unveiled "Unimo" a single-seat electric vehicle (EV) for hospitals and rehabilitation centers that features a comfortable chair with tank-like rubber treads. While not designed specifically for off-road travel, the treads on the Unimo wheelchair allow it to turn in place making it easier to navigate around hospital corners and in an

Universal Arm Mount (Model 347-Ua503)

The Universal Arm Mount, model 347-UA503, is a mounting clamp for wheelchair accessories designed specifically for attachment of the MYDESC EZ-Removable Arm (see separate entry). This metal clamp block can be used with wheelchair tubing from 0.75 to 1.25 inches in diameter, and provides a 0.78 inch cylinder slot for mounting the EZ-Removable Arm directly to the wheelchair frame. The clamp may be mounted either horizontally or vertically.

Universal Carry All

The Universal Carry All is a carrying bag for walkers designed to provide carrying capability for people with mobility disabilities. This heavy-duty nylon pouch secures to walker crossbars, wheelchairs, and bed rails and features one large compartment, a security pocket and eyeglass pouch, and a keypouch with cord. DIMENSIONS (WxL): 18.75 x 11 inches.

Universal Headrest Mounting Plate (Model 7730)

The Universal Headrest Mounting Plate is seating hardware designed for use with wheelchair headrests. This plate enables a variety of headrests from various manufacturers to be interchanged as needed. The headrests may be changed without having to redo the T-nuts in the back.

Universal Support Arm (Usa) (Model F70660)

The Universal Support Arm (USA), model F70660, is an extension arm for wheelchair accessories that clamps to the wheelchair's tubing. The basic arm is made of telescoping aluminum tubing that allows rotational and axial adjustment. Tube collars clamp by integral locking knobs. Angle adjustments are made at two U-clamp joints. Knobs are also used to lock the holder at any angle. The arm has a camera support with a 1/4-20 thread that fits standard 35mm camera thread wells. Included is a hardware p

Universal Tote (Models Ez0101 & Ez0102)

The Universal Tote is a carrying bag for a walker or a wheelchair side pouch designed for use by individuals with mobility or walking disabilities or spinal cord injury. Made of nylon, this pack attaches with two adjustable straps to the front of a walker, and the smaller size (model EZ0102) attaches to the armrest of a wheelchair. An inner pocket can be accessed by opening a full-length zipper. There are two (model EZ0101) or three (model EZ0102) pockets on the outside. SIZES: Large (model EZ01

Unreal Lambskin Wheelchair Accessories

Unreal Lambskin Wheelchair Accessories are decubitus pads for various pressure points including the seat, back, arm and footplates. These covers are made of synthetic fleece for pressure relief and prevention of decubitus ulcers. The material consists of 3/4-inch pile and is stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resists packing down. Foot plate, arm and removable desk arm pads are sold in pairs. BACK COVER: Fits all standard adult wheelchair mo

Upholstered Padded Armrests (Model 65)

The Upholstered Padded Armrests, model 65, are wheelchair armrest pads designed for use with wheelchairs with full- or desk-length armrests. COLOR: Upholstered to match color of seat and back upholstery.

Uplift Stumprest Pack (Model Srpack)

The Uplift StumpRest Pack, model SRPACK, is an amputee leg support designed for use on wheelchairs by individuals with below-knee amputation. The StumpRest unit comprises a universal cross-frame drop-base with a moisture-proof ABS plastic top with retractable sliders that accommodate right, left, or dual amputations. The pack includes a choice of StumpRests (model SR 16, model SR 18, or model SR 20, one standard foam slider cushion, and two Versa Lock drop hook retainers (all components are also

Utility Clamp For Wheelchair Accessories (Model H70673)

The Utility Clamp for Wheelchair Accessories, model H70673, is a mounting clamp that attaches to the frame of wheelchairs 7/8-inch in diameter. A thumb screw holds the clamp securely. A parallel hole accepts a 3/8-inch diameter rod, and the set screw is turned with a knurled knob. The clamp is made of ABS plastic.

Valueview Tray (Model 3115)

The Valueview Tray, model 3115, is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): 23.5 x 19 inches. The straps are one inch wide. The tray is 0.25-inch thick. WARRANTY: This product is warranted against defects in workmanship and materials for 90 days from the date of purchase.

Van Raam Wheelchair transporter Velo-Plus 2

The VeloPlus wheelchair transport bike is designed for transporting people in a wheelchair by cycle. Users can remain seated in their own wheelchair; the passenger is not required to be transferred between the wheelchair and the cycle. The co-rider can be wheeled on to the plateau of the cycle easily without having to be lifted. The tilted ramp makes it easier to roll the wheelchair on to the wheel-chair bike and fasten it properly with the wheelchair lock. The low positioning of the chair on th

Vanderbilt Exoskeleton

---- PROTOTYPE --------- PURPOSE: To design a prototype of an advanced exoskeleton that enables individuals with paraplegia (severe spinal cord injury) to stand, walk, sit and, climb stairs. A team of engineers at Vanderbilt University’s Center for Intelligent Mechatronics has developed a powered exoskeleton that enables people with severe spinal cord injuries to stand, walk, sit and climb stairs. Its light weight, compact size and modular design promise to provide users with an unprecedented de

Variable Speed Control (Model 10-1A) & 2 Speed Control (Model 10-12)

Electrical control, designed for LaBac Systems recline systems allows speed of recline unit to vary from full speed to 50% speed. Maintains full torque at low speeds to accommodate heavier users. Speed control module has complete attendant switches plus a receptacle to plug in user control switch. 2 speed control has speed set at either 100% or 50%.

Varibrite Mode Display (Model 2775-4)

A remote display used in conjuction with a Multimode interface to indicate when the system is in standby, or in one of four oeprating modes. The display is mounted on a flexible gooseneck to position the display for optimum viewing, and to help protect the display from impact damage. The gooseneck is fitted to a mounting tube for attachment to an armrest using a standard hand-control clamp.

Varilite Solid Insert

The Varilite Solid Insert is a solid seat insert designed for use in wheelchairs by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This insert is placed between the cushion and upholstery or directly inside the cushion cover to eliminate the effects of sling upholstery. Inserts are available to accommodate pediatric as well as adult users. They are made from durable plywood with rounded edges and sanded surfaces to reduce chance of splintering or pu

Velcro Closure Armrest Mount For Lapboard (Model 08-1000)

Lapboard with velcro closure, mounts on armrest. 1/4 inch clear acrylic. Sizes: 26 by 24 inches with 15 by 19 inch body cutout, 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/ 2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.

Velcro Closure Safety Strap For Wheelchairs (Model H70623)

The Velcro Closure Safety Strap for Wheelchairs, model H70623, is a wheelchair seatbelt made of Velcro closure with metal D-ring buckles. The belt is adjustable, washable, and can be sterilized. The strap can be positioned at various heights to insure user comfort and security. A short strap anchors to the wheelchair frame while the long strap adjusts in length. DIMENSIONS: 32 inches long x 2 inches wide.